All Lollipop Roms For Lenovo Vibe P1m
Roms :
TangerineOS Vladomen
Blisspop Wizard|Mirror
Resurrection Remix Wizard|Mirror\NoName\Rockmetal\VIK
XenonHD Wizard|Mirror
AICP Psihop|Mirror\Rockmetal
SlimRom Maestro
CM12 Wizard|Mirror
AOSP Psihop|Mirror1/2\Ersh\Rockmetal\Sandeep\Maestro
MokeeOS Rockmetal
AOSP meterialN Maestro
TipsyOS Rockmetal
MemoryOS VIK
SonyUI Sandeep
EMUI Sandeep
XUI Sandeep
VibeStyle Wizard\Vandizel\Ersh
VibeUI3.0 Psihop|Mirror
VibeUI3.5 Sandeep
LewaOS Wizard|Mirror
StarOS Psihop|Mirror
FlymeOS Psihop(V4)\Wizard(V5)\Rockmetal(V6{1})\Rockmetal(V6{2})
MIUI7 Wizard\Ersh
MIUI8 z3r0c00l_2k(MR)\Rockmetal(MR)\Rockmetal(MP)
MIUI9 Rockmetal(MR)\Rockmetal(MP)\Amin(MP)
IOS Dhiraj
DevilRom Sandeep
TouchWiz Sandeep
Note: Thanks to Abhishek for reuploading the missing roms
Notes:
All roms are based on mediatek 6735 64 bit chipset ,3.10.65 kernel
All roms are based on old mount points so use twrp 3.1.0
Some of them have Gapps , Anyway to get latest form of it flash Gapps Gapps (Arm64,5.1,pico){5.0 for miui}
If setupwizard is causing problems or device is stuck on google signin flash this Patch
Some roms have magisk/superSU with it so check thier post's before flashing
Procedure:
Download Rom
Go to Recovery { use 3.1.0 }
Select rom.zip file
Flash
Flash Gapps
Flash magisk/superSU if you need
Reboot
Devs:
z3r0c00l_2k Github Gmail XDA
Sandeep Kumar Github XDA
DhirajMS Github XDA
VIK XDA
Rockmetall666
Vladomen
Amin
NoName
Psihop
Vandizel
Ersh
Do Lenovo vibe p1m really need to get its bootloader unlocked to flash custom roms?? I flashed a custom recovery without unlocking boot loader... So confused??
tytfusokhszxc said:
Do Lenovo vibe p1m really need to get its bootloader unlocked to flash custom roms?? I flashed a custom recovery without unlocking boot loader... So confused??
Click to expand...
Click to collapse
It's not locked thus unlocking it is not necessary
Trex2017 said:
It's not locked thus unlocking it is not necessary
Click to expand...
Click to collapse
How can i check that??
tytfusokhszxc said:
How can i check that??
Click to expand...
Click to collapse
as i already told you it's unlocked by default you don't even have to worry about it
Which Rom has magisk support?
ms.durian said:
Which Rom has magisk support?
Click to expand...
Click to collapse
Well, Magisk is not dependent of Rom... If ur device supports it, then any rom with it does....
Or are you asking about the Roms which have pre installed Magisk on it??.
tytfusokhszxc said:
Well, Magisk is not dependent of Rom... If ur device supports it, then any rom with it does....
Or are you asking about the Roms which have pre installed Magisk on it??.
Click to expand...
Click to collapse
I tried to install magisk on miui9, stock rom, amigoOs and a few other Roms but magisk failed both safety net check. Could you share which Roms have pre installed Magisk?
ms.durian said:
I tried to install magisk on miui9, stock rom, amigoOs and a few other Roms but magisk failed both safety net check. Could you share which Roms have pre installed Magisk?
Click to expand...
Click to collapse
I don't know which Roms have magisk pre installed... But, i guess newer Roms are more probable ..
When i was on stock, i reflashed magisk which solved both safety net problems... Also doing some tweaks with it might work..
Mind to share which stock rom? S40? I tried to flash magisk on S40 but failed safety net check...
ms.durian said:
Mind to share which stock rom? S40? I tried to flash magisk on S40 but failed safety net check...
Click to expand...
Click to collapse
Actually, i was on s036 .. I got S040 OTA update... But it got error during installation
Sony UI ROM for P1ma40 Vibe Lenovo
Sony UI ROM has problems with sd card.. it cannot read or recognize or mount !! I tried to change format (i.e exFAT,FAT,NTFS) none of them worked.. then tried checking fstab file.. fstab.mt6735 .. the codes were all clear..!! And I am using- class 10 Sandisk Ultra 16GB SD card.. ! I have tried every ROM in P1ma40 Phone.. but I never got this bug/error.. ! solve this issue I loved this ROM.
Got stucked on Google sign in
Related
Is it working? I installed a nougat custom ROM on my phone (redmi 2). Installed dnscrypt through recovery, using zip file from dnscrypt.com v.1.9.4. I basically do what I did when installing dnscrypt on my MIUI ROM and worked. But now it seems doesn't work with this ROM. Is this Nougat issue or just me?
Edit: nvm I got it solved.
Hello. How you solved it?
Skcyte said:
Is it working? I installed a nougat custom ROM on my phone (redmi 2). Installed dnscrypt through recovery, using zip file from dnscrypt.com v.1.9.4. I basically do what I did when installing dnscrypt on my MIUI ROM and worked. But now it seems doesn't work with this ROM. Is this Nougat issue or just me?
Edit: nvm I got it solved.
Click to expand...
Click to collapse
Pls tell me how?
Just follow the instructions at the dnscrypt's website.
Skcyte said:
Just follow the instructions at the dnscrypt's website.
Click to expand...
Click to collapse
It's gone officially, some people forked it to github
Adapted oficial ROM with @mparus kernel
Flash this recovery ( only work whit this)
https://mega.nz/#!BZtE1bzZ!rlzdHNpf6Xs4t00o-GjHJbTUnE4s9aaNmsv1TutLLy8
Flash rom
Flash adaptation zip
Flash navbar
Flash gapps
For update ThE shame operation with wipes cache and dalvik,system
Adaptation zip
Enable navbar
ROM
https://download.lineageos.org/cherry
Bugs
Nfc
Are you maintaining official builds of lineage for G7? Does this mean that we'll be getting updates?
Enviado desde mi Moto G4 Plus mediante Tapatalk
can i flash it to g7-l11 its on android 6.0.1 and i unlocked the bootloader and install twrp 3.0.0 and root with magisk
Can you please reupload Adaptation zip and navbar somewhere, where registration is not required?
last mparus kernel http://www7.zippyshare.com/v/np9rnEOK/file.html
luistro said:
last mparus kernel http://www7.zippyshare.com/v/np9rnEOK/file.html
Click to expand...
Click to collapse
One question bro... Does the rom support F2FS?
Sent from my Moto G4 Plus using Tapatalk
I have 2 issues.
1- Apps wont open sometimes. Stops working.
2- Storage insufficient. I choose sd card as a internal and storage is 15gb/44gb but it says no place for apps or photos.
Please help.
And i couldnt get the adaptation.ziip so i have cherry rom but not properly.
no problema here
can you plz redownload the navbar enabling ?
can i flash it using twrp cause i have problem with philz
Folueadeux said:
can i flash it using twrp cause i have problem with philz
Click to expand...
Click to collapse
of course
GessaNNN said:
of course
Click to expand...
Click to collapse
well actually, as op mentioned it works with philz only.
i tried installing with twrp, it failed and the error message was something like this rom is not compatible with your device.
then i tried the recovery op linked, worked a charm.
mhanp said:
I have 2 issues.
1- Apps wont open sometimes. Stops working.
2- Storage insufficient. I choose sd card as a internal and storage is 15gb/44gb but it says no place for apps or photos.
Please help.
And i couldnt get the adaptation.ziip so i have cherry rom but not properly.
Click to expand...
Click to collapse
Hi.first register on htcmania to download files and install rom and other tools and gapp and clean cach/delvik and restart...with philz recovery...
Excuseme my english not good..
Personally, I inject an install script made by me in which there's G760-L01 as compatible device everytime I download a new nightly, then it flashes with TWRP without problems.
updated firts post
Can someone help me with an issue i have?
my headphone jack stopped working and the only way it works again is with an app called SoundAbout but i'm very tired of switching modes everytime..
is my headphone jack damaged or is it the system not correctly routing the sounds?
I've flashed many ROMs and still no fix, have to use this stupid app please help!
Hello, I was trying to install this custom rom from TWRP 2.8.7.0 but when i try to flash this file i get the following error
E3004: This package is for device : c8817d,g620s,C8817D,C8817E,G621-TL00,G620S-UL00,G620-L01,Che1-CL20,Che1-L04:
this device is .
Click to expand...
Click to collapse
along with the following error messages (that i think they are related to twrp):
E: unknown command [log]
E:Error executing updater binary in zip '/external_sd/lineage-14.1-20170904-nightly-cherry-signed.zip'
Error flashing zip '/external_sd/lineage-14.1-20170904-nightly-cherry-signed.zip'
Click to expand...
Click to collapse
I don't have that much skills in rom flashing for android (I've only flashed almost successfully another rom for a lg g7-01), so can someone please help me with this?
Thanks in advance, Spinoni31.
Edit: I decided to switch to philz and it worked. The only things that don't seem to work are the NFC, and with it, my flip cover. If soemone can help me on this matter, i would really appreciate it. Thaks, Spinoni31
works perfectly fine if you're gonna flash it with the recovery linked.
flashing magisk and bypassing safetynet works.
Haven't experienced any annoying bugs yet. NFC doesn't work as said, but i don't even need/use it.
Thank you very much for this ^^
Vodes said:
works perfectly fine if you're gonna flash it with the recovery linked.
flashing magisk and bypassing safetynet works.
Haven't experienced any annoying bugs yet. NFC doesn't work as said, but i don't even need/use it.
Thank you very much for this ^^
Click to expand...
Click to collapse
Magisk link please :highfive:
Alanryav said:
Magisk link please :highfive:
Click to expand...
Click to collapse
Works perfectly fine with the official Magiskv14.0.zip
TWRP for SM-C900F and SM-C900Y (Indian and Taiwanese Variants)
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
Contributors
@travis82
@k2wl
Source Code: https://github.com/TeamWin
Source Code device tree: https://github.com/Galaxy-C9-Pro/twrp_android_device_samsung_c9lte
TWRP Download: https://www.androidfilehost.com/?fid=817550096634790824
SuperSU: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
no-verity-no-encrypt: : https://www.androidfilehost.com/?fid=745425885120752506
Hi,
Great to hear that we got a fully working TWRP recovery for SM-C900F.
If I may suggest, Why don't you work on K2WL's Lineage Rom with his full permission for SM-C900F.
https://sourceforge.net/projects/c9lte/
It would be great. I successfully flashed both the files in the above link @ it works fine. But wifi, data, ril, camera, Sound doesn't work.
It would be great if you work on this. Please try.
Just need a Daily driver Rom..
What say?
:good::laugh:
@deadman96385 welcome in here buddy, ill give a try asap
@Pariki first of all its kinda rude to ask for such a thing, and please check this
Pariki said:
Hi,
Great to hear that we got a fully working TWRP recovery for SM-C900F.
If I may suggest, Why don't you work on K2WL's Lineage Rom with his full permission for SM-C900F.
https://sourceforge.net/projects/c9lte/
It would be great. I successfully flashed both the files in the above link @ it works fine. But wifi, data, ril, camera, Sound doesn't work.
It would be great if you work on this. Please try.
Just need a Daily driver Rom..
What say?
:good::laugh:
Click to expand...
Click to collapse
K2WL has no desire to work with anyone it seems because he hasn't responded to anyone so Travis and I have been working on it ourselves and have gotten to the same state he was in a matter of days. So it will happen soon don't worry.
AL_IRAQI said:
@deadman96385 welcome in here buddy, ill give a try asap
@Pariki first of all its kinda rude to ask for such a thing, and please check this
Click to expand...
Click to collapse
Thank you yes that is our GitHub where we are working on sm-c900y/sm-c900f and sm-c9000.
deadman96385 said:
Thank you yes that is our GitHub where we are working on sm-c900y/sm-c900f and sm-c9000.
Click to expand...
Click to collapse
Just a question buddy, which model do you have ?, i have c9000, and i've been trying to run the global ROM for c900f, but wifi doenst seems to work
i even tried running c9000 kernel on c900f, but it didnt help either, im sorry for off-topic
hey what ways to c900f rom installation for c9000 i want this
AL_IRAQI said:
Just a question buddy, which model do you have ?, i have c9000, and i've been trying to run the global ROM for c900f, but wifi doenst seems to work
i even tried running c9000 kernel on c900f, but it didnt help either, im sorry for off-topic
Click to expand...
Click to collapse
ahmetk711 said:
hey what ways to c900f rom installation for c9000 i want this
Click to expand...
Click to collapse
I have the sm-c900y (Taiwanese) which is very similar to sm-c900f. I don't know exactly why wifi doesn't work across the Indian/Taiwanese variant and the Chinese variant
İ flashed this recovery but ummounted data error and i didnt install any rom. The dont see internal memory. What problem.
ahmetk711 said:
İ flashed this recovery but ummounted data error and i didnt install any rom. The dont see internal memory. What problem.
Click to expand...
Click to collapse
You need to wipe your internal memory because Samsung encrypts it with a non-standard method so we can not decrypt it in twrp.
But erroring while wipe data same issue pls help me
ahmetk711 said:
But erroring while wipe data same issue pls help me
Click to expand...
Click to collapse
============
This might help you...
https://forum.xda-developers.com/showpost.php?p=71792618&postcount=10
:good:
very very thanks man. This is fix my problem. i forgot format data
Thanks
Hi again buddy, device name while using mtp is "omni_c9lte", is it possible to remove "omni" from the name ?
it's not booting in Custom REcovery
may be i am doing something wrong ..can you help me plz?
i flashed TWRP as shown in link but it's not booting again in Custom recovery
deadman96385 said:
TWRP for SM-C900F and SM-C900Y (Indian and Taiwanese Variants)
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
WHAT IS TWRP?
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
Contributors
@travis82
@k2wl
Source Code: https://github.com/TeamWin
Source Code device tree: https://github.com/Galaxy-C9-Pro/twrp_android_device_samsung_c9lte
TWRP Download: https://www.androidfilehost.com/?fid=817550096634790824
SuperSU: https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
no-verity-no-encrypt: : https://www.androidfilehost.com/?fid=745425885120752506
Click to expand...
Click to collapse
untick auto reboot in odin, and do reboot manually
Hi!
Just wanted to publish here the CR-DROID-ROM for our beloved Xiaomi Redmi 3/Pro.
Note:
I'm only the publisher, not the maintainer of this ROM. While you can post bug-reports here, they cannot be fixed by me.
Description from the dev-site:
This is a free AOSP / CyanogenMod Android based ROM bringing a lot of custom features ported from AOSPA, SlimRoms, OmniRom and many others great roms out there
crDroid brings what Android have of most advanced in terms of customization and stability.
Click to expand...
Click to collapse
The dev-site at Google+:
https://plus.google.com/communities/118297646046960923906
LINKS:
DOWNLOAD-LINK for crDroid with standard-kernel (hosted at Mega.nz)
DOWNLOAD-LINK for crDroid with DT2W-kernel (hosted at Mega.nz)
WHOLE DOWNLOAD-FOLDER (with older versions)
New Revision is out:
Xiaomi Redmi 3/Pro ROM CR-Droid 7.1.2 V3.8.3 Official-Build 2017-11-25
Just flash with with any version of Open-Gapps 7.1 (ARM64) (I recommend to use "Pico") and Magisk.zip. Don't forget to install the app "Magisk-Manager"!
Credits go out to Bondstas (UA) for generating this ROM.
P.S.:
The thread will be updated from time to time if I notice, that a new version of CR-Droid is out.
Update-history:
15-08/2017: CR-Droid V3.7 from 15-08/2017 is out!
25-08/2017: CR-Droid V3.7 from 15-08/2017 with DT2W-kernel added!
11-10/2017: CR-Droid V3.7 from 09-10/2017 is out!
14-10/2017: CR-Droid V3.7 from 09-10/2017 with DT2W-kernel added!
18-11/2017: CR-Droid V3.8.2 from 01-11/2017 is out!
31-01/2018: CR-Droid V3.8.3 from 25-11/2017 released!
01-02/2017: CR-Droid V3.8.3 from 25-11/2017 with DT2W-kernel added!
Thanks a lot!
Another ROM for our Redmi3!
crDroid V3.7 from 15-08/2017 is released! - Download see 1st post!
Is this the same with bondstas build ?
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
No, I think it's the one from Winkarbik.
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
frankonia said:
No, I think it's the one from Winkarbik.
Click to expand...
Click to collapse
but, the rom size is the same
Ok, then you are probably right. I have it from 4PDA.
ABDZR_43 said:
but, the rom size is the same
Click to expand...
Click to collapse
The best way is by calculating md5 checksum of zips.
Sent from my Redmi Note 4 using XDA Labs
Double tap to wake DT2W kernels for CR-Droid that I uploaded to Mega from Bondstas on 4PDA. I use rom version 3.6 coming from RR and it's works great. It's smooth and everything works. I found version 3.7 had buggy sound issues.
You must have a focaltech panel. https://forum.xda-developers.com/showpost.php?p=68344933&postcount=493
3.6 https://mega.nz/#!35AVQKRR!M5b72YaeK9vv0JMs0x-iZupP93KVKofP8095JJ3GL2A
3.7 https://mega.nz/#!vlpUAbCY!yWF15BcwyKVGB1X4TxF3bWoZPiXNRFbKIHWn6zNxNI4
ABDZR_43 said:
Is this the same with bondstas build ?
Click to expand...
Click to collapse
I took a look in the "About"-menue: Under "Kernel-version" stands "3.10.107-lineageos.... winkarbik@ubuntusrv #1"
So this ROM is from WinKarbik.
double-post => deleted!
tripper22 said:
Double tap to wake DT2W kernels for CR-Droid that I uploaded to Mega from Bondstas on 4PDA. I use rom version 3.6 coming from RR and it's works great. It's smooth and everything works. I found version 3.7 had buggy sound issues.
Click to expand...
Click to collapse
I inserted the DT2W-kernel to the main ROM-file. Download-link in the first post!
This ROM has problem with Xposed making phone unbootable.
I tried two other ROMs (Lineage and AICP) which don't have the problem.
hi !
please can you guide me on how to
1. unlock bootloader of my redmi3 ( xiaomi has refused to acknowledge my request)
2. flashing this Custom ROM of yours. as well as the kernel
reason for this:
1. google play isn't working
2. all those Chinese apps with not language to know what they are about is taking up so much space and running
thanks alot
JOLLYNERY said:
hi !
please can you guide me on how to
1. unlock bootloader of my redmi3 ( xiaomi has refused to acknowledge my request)
2. flashing this Custom ROM of yours. as well as the kernel
reason for this:
1. google play isn't working
2. all those Chinese apps with not language to know what they are about is taking up so much space and running
thanks alot
Click to expand...
Click to collapse
Excuse me in advance for going OT but before trying to install custom roms, have you tried to flash global version of MIUI that is bundled with most of world languages and can fit your needs: it has got working google play, not a single china app and is working fairly well in all parts. It can be easily flashed on locked bootloader as well using miflash tool, a windows 64 bit system and putting the phone in download mode.
You can find most of informations here http://en.miui.com/thread-228048-1-1.html
@ Ivan thanks for the suggestion. Sincerely, I'm grateful. It's just I think I'm feed up with everything not custom. This is the first phone that I haven't bin able to gain root access as well as flashing custom ROM.
I want to even run twrp as well, but I just learnt of dm-verity. I just need a way out of this.
JOLLYNERY said:
@ Ivan thanks for the suggestion. Sincerely, I'm grateful. It's just I think I'm feed up with everything not custom. This is the first phone that I haven't bin able to gain root access as well as flashing custom ROM.
I want to even run twrp as well, but I just learnt of dm-verity. I just need a way out of this.
Click to expand...
Click to collapse
If you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in TWRP (immediately after you flash TWRP I mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: this will patch boot.img and you will have a "permanent" TWRP that won't go away at first system restart. Now you can install SuperSU or any custom rom you want to try without any problem! Now, after much time on MIUI 8, I'm on LOS 14.1, but I've tried many other custom roms, each of one was stable and good for daily use except AEX which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. CR-Droid is very good as well!
ivanhoe1976 said:
If you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in TWRP (immediately after you flash TWRP I mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: this will patch boot.img and you will have a "permanent" TWRP that won't go away at first system restart. Now you can install SuperSU or any custom rom you want to try without any problem! Now, after much time on MIUI 8, I'm on LOS 14.1, but I've tried many other custom roms, each of one was stable and good for daily use except AEX which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. CR-Droid is very good as well!
Click to expand...
Click to collapse
lemme try it out bro, thanks alot.
JOLLYNERY said:
lemme try it out bro, thanks alot.
Click to expand...
Click to collapse
Guys it didn't work out for. I tried updating through updater but it didn't. Then through pc, it didn't respond. Says I am not allowed to update to any other ROM that is, not a STABLE.
I would b grateful if u assist.
Thanx
ivanhoe1976 said:
if you have already unlocked your bootloader (otherwise have a look at this: http://en.miui.com/thread-324619-1-1.html), install twrp (following instructions you can find here on xda) and then, when you access for the first time in twrp (immediately after you flash twrp i mean!), flash lazy-flasher that you can find here http://en.miui.com/thread-310923-1-1.html: This will patch boot.img and you will have a "permanent" twrp that won't go away at first system restart. Now you can install supersu or any custom rom you want to try without any problem! Now, after much time on miui 8, i'm on los 14.1, but i've tried many other custom roms, each of one was stable and good for daily use except aex which is a very good rom but someone (like me), on latest build, wasn't able to use internet data for a bug. Cr-droid is very good as well!
Click to expand...
Click to collapse
it didnt work out. It requested i can only update with stable rom. Because i tried updating with global dev rom . I might just trash this fone
Rooted my redmi Note 3 kenzo with supersu. Even after granting root access es file explorer Pro & similar apps are unable to install, uninstalll multiple apk files in 1 click.thought problem is with supersu so replaced it with magisk but the problem persists.my friend can install multiple apk in 1 click on his moto g2. Please help me to solve this problem
please help somebody
I think ur system is not properly rooted... let us know how did u root the system 1st..
evansourav said:
I think ur system is not properly rooted... let us know how did u root the system 1st..
Click to expand...
Click to collapse
I used both magisk & supersu but nothing works.titanium backup works.
it works on ported miui nougat roms&viper also
but in all other runs it fails.
borsemayur2 said:
I used both magisk & supersu but nothing works.titanium backup works.
it works on ported miui nougat roms&viper also
but in all other runs it fails.
Click to expand...
Click to collapse
Which rom you are on currently, Which twrp are you using?
evansourav said:
Which rom you are on currently, Which twrp are you using?
Click to expand...
Click to collapse
iam using dual boot patcher.have 5 roms.miuipro nougat is primary.es install is working in it.but not working in nitrogen nougat,oreo & miuipro mm & rr.using red wolf recovery
borsemayur2 said:
iam using dual boot patcher.have 5 roms.miuipro nougat is primary.es install is working in it.but not working in nitrogen nougat,oreo & miuipro mm & rr.using red wolf recovery
Click to expand...
Click to collapse
Dual Boot is logical to me but running 5 roms at a time simply shows you want to be Coc$y not Geeky .. you asked for problems now you should know to find the way too.. Good luck!
evansourav said:
Dual Boot is logical to me but running 5 roms at a time simply shows you want to be Coc$y not Geeky .. you asked for problems now you should know to find the way too.. Good luck!
Click to expand...
Click to collapse
I have tried all roms without dual boot patcher but(1 at a time) but the problem exists
Clean Fastboot Miui..
working in ported roms like epic,miuipro nougat
not working in most of the roms