Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
EFAYSAL said:
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
Click to expand...
Click to collapse
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
SubwayChamp said:
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
Click to expand...
Click to collapse
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
EFAYSAL said:
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
Click to expand...
Click to collapse
Ok, I guess that your device is actually in bootloop and don´t booting.
Tutorial that you followed has many steps and don´t need to do all this to just root device and it contains some files like lk.bin that you can´t be sure that should be for your device.
Some users use this file (lk.bin) of an unlocked device and think that flashng in other device then get unlock it but no need, your device can be unlock it just follow some commands in fastboot mode.
Now you can do the next;
Try to flash again your rom stock (I guess that you don´t have a backup), if for some reason your official tool doesn´t work then use only some images like boot, system and userdata with the scatter.txt to flash them through SP Flash Tool.
Here a link to TWRP https://youtu.be/6vj_BY6xJdA, you can root it with supersu v2.78 0r v2.82 and here some files that can be usefull too https://drive.google.com/uc?id=0BwJgeCYTpnEHNlg2VUlieHFTYVU&export=download
Update steps that you are following to can assist. What extension has your rom and if it is recogniced for SP Flash Tool. I didn´t ask you if you can enter to fastboot mode and if you can then you can know if your bootloader is unlocked typing fastboot oem info
Most info that you give and some screenie will help to understand better
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
EFAYSAL said:
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
Click to expand...
Click to collapse
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
SubwayChamp said:
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
Click to expand...
Click to collapse
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
EFAYSAL said:
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
Click to expand...
Click to collapse
I´m not sure if you are connecting correctly your device at right time and form to can flash it properly. Every device has more or less a specific way to do it. My last alcatel it was connected just with device power off and after to tap on download, but in other device Blu Dash was connected pressing just vol_up and my last mt6757 Bluboo had to press both vol up and down at time to connect to pc and after to tap on download option. To have sure that is well done increase volume in your pc, you will hear a first sound that is cause pc is recognicing but then you have to hear a second sound that is when SPFlashTool is recognicing device and you will see a red line in down side of the tool window, release button inmediately and let tool to work.
This is a good rom for your device according the author is optimized https://droid1311.blogspot.com/2017/08/alcatel-fl02-aka-flash-plus-2-via.html and this is the link directly if you have troubles with pop-up-adds https://drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbXpjQWM/view
Also you can try with other versions of SP Flash Tool, most stable maybe should be v5,1628 https://androidmtk.com/smart-phone-flash-tool leth me know how you go
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
SPFlashTool 5.1628:
I try all the way with and without pressing any button but no luck . And when it work finishing with error.
SPFlashTool 5.1628:
I try all the way to get that mode but nothing works. So I try to click download button then conect the phone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
EFAYSAL said:
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
I try all the way to get that mode but nothing works. So I try to click download button then conect the pkone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
Click to expand...
Click to collapse
There is a part that is not variable in the way to use this tool, ever you have to tap on download before to connect device and is recommendable too connect cable usb to pc (not yet to device); from here is when the button that you have to press can vary but like I said you before in my last mt6757 (a very similar to yours) works pressing both vol at same time to connect terminal cable to device and now you will see a red line (could be violet-ish)
Try before just flashing only preloader file to recreate some partitions and then do other flash for the other files.
Of course you have to be sure that all drivers are installed correctly cause this tool needs to put your device in download mode (a special level) and also keep it in this state so find VCOM drivers for Alcatel and adb/fastboot installer and try to uninstalling some older drivers that you don´t use and many times we keep in our pcs and for a short data transmission can helo that all the rom move it in same folder where SPFlashTool is allocated.
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
EFAYSAL said:
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
Click to expand...
Click to collapse
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
- In what android version are you, 6.0?
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
- Did you try to flash just preloader, only this file?
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
SubwayChamp said:
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
Click to expand...
Click to collapse
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
SubwayChamp said:
- In what android version are you, 6.0?
Click to expand...
Click to collapse
Yes, last time it was 6.0 before the root
SubwayChamp said:
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
Click to expand...
Click to collapse
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
SubwayChamp said:
- Did you try to flash just preloader, only this file?
Click to expand...
Click to collapse
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
SubwayChamp said:
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
Click to expand...
Click to collapse
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
EFAYSAL said:
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
Yes, last time it was 6.0 before the root
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
Click to expand...
Click to collapse
You need to try two different ways to flash files and restore your device.
First method: fastboot mode
You need to get device enter to fastboot in order to flash some files like system, boot and userdata, then there are two main methods to do it:
- Pressing pwr + vol down
- And I mentioned that sometimes work pressing both volume button + pwr and a menu have to appear to can select an option to enter to (fastboot mode), in some devices this method is not working but you have to try several times attempting to.
Second method: SPFlashTool
You have to ever press first of all Download box and connect terminal cable to pc and the buttons thhat you need to press at time to connec cable usb to your device may vary, sometimes vol down, sometimes both vol but never pwr button; if pc recognice then you have to release all buttone an let it pc continue the flash process.
If SPFlashTool recognice device first flash only preloader file and select now lk.bin too. Flash only these two files and after do again a new flash with the rest of the files, Why you need to do this? your partitions are corrupted and you need to restore them with these files in order to can flash all another files.
Before all of this charge your battery, if you have a cover removable then extract it some minutes and put it again.
Also I read that for this model it´s used this tool instead of SPFlash Tool https://androidmtk.com/download-sugar-mtk-sp-flash-tool (inside the zip you will find a password to start the tool) but I´m not sure what kind of rom it needs, you have to connect your device to begin the process, you will find in product models section in the tool this variant for your device "FL02"
Try first the other tool and then this and let me know how you go, mtk devices are almost unbrickeable so it´s just to find the appropriate way to return it to the life.
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
EFAYSAL said:
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
Click to expand...
Click to collapse
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
I understand that you tried with Sugar tool with no lucky.
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Is there some custom development, recovery, roms for your device?
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
SubwayChamp said:
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
Click to expand...
Click to collapse
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
SubwayChamp said:
I understand that you tried with Sugar tool with no lucky.
Click to expand...
Click to collapse
Yes. After recognizing it keeps trying to download data but no luck.
SubwayChamp said:
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Click to expand...
Click to collapse
I know it is disappointing!. I try this but no luck.
SubwayChamp said:
Is there some custom development, recovery, roms for your device?
Click to expand...
Click to collapse
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
SubwayChamp said:
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
Click to expand...
Click to collapse
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
EFAYSAL said:
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
Yes. After recognizing it keeps trying to download data but no luck.
I know it is disappointing!. I try this but no luck.
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
Click to expand...
Click to collapse
I´ll tell you some ideas with no any specific order that you can try or see if works.
Really very strange that display stays in black, you told me that flashing files through fastboot is working but doesn´t appear not even bootlogo, connect to pc as it is and see how pc recognices in devices manager and my pc if appears like a determined drive d/e/f so it looks that some bad flashing burn your kernel and this case is similar to when a Samsung device need to use jtag method to revive, if in your country no-one knows about Alcatel devices this could be a similar case to what I´m saying then it could be a clue for a technician. I tell you this cause many time ago when I flashed by error a Samsung s4 and only this method revived my device.
Try this, flash your stock recovery only through SPFlash tool and flash after through Alcatel Download tool your stock rom cause some firmwares need to detect stock recovery first to can flash other partitions.
At this stage don´t you have stock recovery, no? so you can try to format data cause sometimes when bootloader is altered then avoid to boot and formatting data can solve this.
If this recovery twrp is for your device you can try flashing through SPFlash tool, you have to put recovery.img and scatter-txt in a same folder. then if succesfull format data, system, wipe cache and dalvik and maybe later try to port some custom rom would be a way to solve this.
To flash any partition through fastboot this is the syntax, just follow one by one any of the files that are in your rom folder so just follow these, if some of then can´t be flashed don´t worry then it´s not flashable:
fastboot flash boot bot.img
fastboot flash cache cache.img
fastboot flash lk lk.bin
and so on till the end
...But after try this if you didn´t get boot to recovery and obviously you can´t delete data nor system then delete first the next partitions trough fastboot typing:
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot erase boot
Try all this and let us see how it goes
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
EFAYSAL said:
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
View attachment 4518365
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
Click to expand...
Click to collapse
I see that Sugar tool detects your device like rooted and refuses to flash anything, compare imei number which is in the box, I hope that it couldn´t be changed.
Don´t tell me simply no luck, what it says in SPFlash tool when you tried to flash TWRP and I guess that you put scatter-txt and twrp renamed recovery.img simply in the same folder. Just to be clear, to can flash with this tool your device it has to be off not needed fastboot for this. (provide some screenie)
Other combination of keys to enter to fastboot to flash some partitions when something is missing is, try these three ways:
- Pressing only vol down and at same time connecting to charger (connect first one terminal of cable to your device and then to the charger)
- Pressing the three buttons till a menu appears (you must to release inmediately all)
- Pressing vol up + pwr till a menu appears (you must to release pwr button inmediately) then choose fastboot
In the post 4 I provided a link from Google Drive, in this zip there are 8 items;
- From the item 2 use this version of SP Flash tool, put the four files in a folder and flash them
- In the item 3 you will find some scripts for fastboot, maybe they´re working better and also you have here a subfolder with twrp image.
- And if you get sucessfully install twrp in the item 7 there is a backup with some files to restore from this recovery.
Try one by one and update the info, I hope that your motherboard is not damaged.
Related
i flashed clockworkmod recovery from rom manager and then tried to boot in recovery but the p500 stuck on lg logo.
i tried to remove battery and then placing again but it wasn't starting.
pls help me i think my phone is brick or something like that
can you try what you find here: http://androidforums.com/getitnowmarketing/330813-all-one-recovery-thread.html
I've experienced the same thing long back, it happens when recovery gets damaged...don't worry, the phone is not bricked...I recovered it by flashing back official firmware by using KDZ...
I'm assuming, u r not able to go to recovery either...r u?
yes i'm not able to go to recovery
to use kdz, pc is required but, when i tried to connect the phone to pc using usb cable it wasn't regonised. what to do
dmayurx said:
yes i'm not able to go to recovery
to use kdz, pc is required but, when i tried to connect the phone to pc using usb cable it wasn't regonised. what to do
Click to expand...
Click to collapse
Try the 8th point mentioned in the post...
Code:
http://forum.xda-developers.com/showthread.php?t=883314
dmayurx said:
i flashed clockworkmod recovery from rom manager and then tried to boot in recovery but the p500 stuck on lg logo.
i tried to remove battery and then placing again but it wasn't starting.
pls help me i think my phone is brick or something like that
Click to expand...
Click to collapse
well lgmdp is the best and the safest method to get ur phn back to life http://forum.xda-developers.com/showthread.php?t=1324105
folow this to flash recovery http://forum.xda-developers.com/showthread.php?t=1318750 just be sure to enable usb debugging on phn before flashing any recovery via clockwork or even lgmdp
shhbz said:
well lgmdp is the best and the safest method to get ur phn back to life http://forum.xda-developers.com/showthread.php?t=1324105
folow this to flash recovery http://forum.xda-developers.com/showthread.php?t=1318750 just be sure to enable usb debugging on phn before flashing any recovery via clockwork or even lgmdp
Click to expand...
Click to collapse
My phone is stuck on LG logo. that means my android isn't booting. so, my point is how can i turn ON USB Debugging.
and the other thing is i installed my phone drivers to pc(win 7 32 bit) but my phone was not recognized so, how can I use the tools like KDZ updater or LGMDP.
Thanks for the reply dude
dmayurx said:
My phone is stuck on LG logo. that means my android isn't booting. so, my point is how can i turn ON USB Debugging.
and the other thing is i installed my phone drivers to pc(win 7 32 bit) but my phone was not recognized so, how can I use the tools like KDZ updater or LGMDP.
Thanks for the reply dude
Click to expand...
Click to collapse
u can use kdz with the emergency mode...nothing to do with the USB debugging...the problem is the phone is not recognized...try many times with the "shaking technique"...it will work for sure, it worked for me...
dmayurx said:
My phone is stuck on LG logo. that means my android isn't booting. so, my point is how can i turn ON USB Debugging.
and the other thing is i installed my phone drivers to pc(win 7 32 bit) but my phone was not recognized so, how can I use the tools like KDZ updater or LGMDP.
Thanks for the reply dude
Click to expand...
Click to collapse
well i am saying that be sure to enable usb debugging in future for the time just use the method to revive your phn back ,when ur phn is on just be sure usb debugging is enabled and than flash recovery using any method u r comfortable with, use the lgmdp method its safe and kdz flashing is used the shaking method when the phn is in dead condition as ur phn boot to lg logo so the lgmdp method will work even the kdz but the later one is bit risky.
Get lgdmp (firmware flasher) on PC
Link: http://*******/5v3zU
Open lgdmp.exe
Disable LG modem
Device manager -> modems
Go to emergency mode first.
For that:
Power off phone (even if by taking out battery) -> keep press volume up+back button and press power button.
Now u will enter emergency mode
In lgdmp click select port
Phone will be detected automatically -> press connect
Close the pop-up window that shows to select image file
Backup NV
Tools -> NV backup
Download recovery
Link: http://*******/5v3tT
Unzip the downloaded recovery into a folder
Open the extracted folder as the image folder in lgdmp
It will show some errors. Don't mind and just close the image selection window
Now press download in main window of lgdmp
It will flash recovery to the phone
After its complete u can boot to recovery by keycombination menu + volume down when pressing power button
Hope it will help
Edit: xda don't allow adfly links so download files from http://lg-p500-optimusone.blogspot.in/p/flashing-custom-recovery-cwm-from-lgmdp.html
Sent from my LG-P500 using XDA
God! What the hell are you doing!
Do you even know what happened to your phone; No!
So don't go for anything
You got your CWM 5.0.2.7 corrupted while flash
So just boot into fastboot mode and flash CWM 5.0.2.0 via fastboot method
@All here: If anyone of you, could please link him to fastboot unbrick method from Bytecode's repo
By the way. What ever you try but KDZ and LGPMD won't recogonise your phone
So no chance to use it
Most probably he will be confused like hell by seeing all those answers like
Go for lgmdp no go to kdz no phone bricked ma money oh GOD.. :banghead:
Am not spamming by the way lol........
doppelgänger said:
Get lgdmp (firmware flasher) on PC
Link: http://*******/5v3zU
Open lgdmp.exe
Disable LG modem
Device manager -> modems
Go to emergency mode first.
For that:
Power off phone (even if by taking out battery) -> keep press volume up+back button and press power button.
Now u will enter emergency mode
In lgdmp click select port
Phone will be detected automatically -> press connect
Close the pop-up window that shows to select image file
Backup NV
Tools -> NV backup
Download recovery
Link: http://*******/5v3tT
Unzip the downloaded recovery into a folder
Open the extracted folder as the image folder in lgdmp
It will show some errors. Don't mind and just close the image selection window
Now press download in main window of lgdmp
It will flash recovery to the phone
After its complete u can boot to recovery by keycombination menu + volume down when pressing power button
Hope it will help
Edit: xda don't allow adfly links so download files from http://lg-p500-optimusone.blogspot.in/p/flashing-custom-recovery-cwm-from-lgmdp.html
Sent from my LG-P500 using XDA
Click to expand...
Click to collapse
still phone stucks on lg logo.
nothing happens when I press the Vol up + return button.
i tried without emergency mode but it won't help
DJoptimus-One said:
God! What the hell are you doing!
Do you even know what happened to your phone; No!
So don't go for anything
You got your CWM 5.0.2.7 corrupted while flash
So just boot into fastboot mode and flash CWM 5.0.2.0 via fastboot method
@All here: If anyone of you, could please link him to fastboot unbrick method from Bytecode's repo
Click to expand...
Click to collapse
Is this what ur talking about i found this
http://forum.xda-developers.com/showthread.php?t=1088046
it isn't from bytecode(u may know this)
no following codes were shown on my screen
Symptom
You tried flashing a custom recovery like ClockWorkMod or Thunderg, or you flashed an incorrect ROM, and when you rebooted, it showed this screen:
Code:
fastboot mode started
udc_start()
DJoptimus-One said:
God! What the hell are you doing!
Do you even know what happened to your phone; No!
So don't go for anything
You got your CWM 5.0.2.7 corrupted while flash
So just boot into fastboot mode and flash CWM 5.0.2.0 via fastboot method
@All here: If anyone of you, could please link him to fastboot unbrick method from Bytecode's repo
Click to expand...
Click to collapse
I found this too a "FastBoot Tutorial"
http://forum.xda-developers.com/showpost.php?p=15122833&postcount=100
after select port nothing appears in new window
dmayurx said:
Is this what ur talking about i found this
http://forum.xda-developers.com/showthread.php?t=1088046
it isn't from bytecode(u may know this)
no following codes were shown on my screen
Symptom
You tried flashing a custom recovery like ClockWorkMod or Thunderg, or you flashed an incorrect ROM, and when you rebooted, it showed this screen:
Code:
fastboot mode started
udc_start()
Click to expand...
Click to collapse
Completely switch off your phone
Press Power + Home button
It will boot into fastboot mode and then just follow the method as shown on the thread (link that you mentioned)
Make sure to download 5.0.2.0 CWM recovery image from here
Two things that i wanna advise you about
1) Read that thread very carefully, understand what you are doing and follow each and every command.
2) Make sure to rename the download *.img file to recovery.img
Note that .img is the extension and not to be included in name
I'm sure this will help
Once done, type in fastboot reboot and wait for the phone to boot to the previous instance, where the phone was before this happened
Avoid using 5.0.2.7; its buggy
dmayurx said:
I found this too a "FastBoot Tutorial"
http://forum.xda-developers.com/showpost.php?p=15122833&postcount=100
after select port nothing appears in new window
Click to expand...
Click to collapse
Don't use this. Use the previous link you mentioned
DJoptimus-One said:
By the way. What ever you try but KDZ and LGPMD won't recogonise your phone
So no chance to use it
Click to expand...
Click to collapse
The same thing happened with my phone too, but I was able to revive it by kdz, flashing back stock froyo...and carried out the entire step again...anyway thanks for mentioning a faster technique...may come handy in future
kiran2cy said:
The same thing happened with my phone too, but I was able to revive it by kdz, flashing back stock froyo...and carried out the entire step again...anyway thanks for mentioning a faster technique...may come handy in future
Click to expand...
Click to collapse
Nice to hear that it helped others out too
I suffered from this about 20 times but it took me 2 minutes to recover back
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
tawhid111 said:
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script to get into fastboot at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
Click to expand...
Click to collapse
So you solve it! :good:
:/
tawhid111 said:
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
Click to expand...
Click to collapse
Still unable to do it, when I plug the cable holding vol+ it just reboot normally :/
foreverman said:
Still unable to do it, when I plug the cable holding vol+ it just reboot normally :/
Click to expand...
Click to collapse
Then try enter in lelus fastboot mode, ad then flash x-loader, uloader, boot.img and recovery.img from stock rom for your device type model. Then repeat steps 1 and 2
Where can I find the lelus script?
Sent from my Note II
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
ciccillover said:
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
Click to expand...
Click to collapse
Then you need a Technician with a Octopus Box to repair your partition table...
ciccillover said:
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
Click to expand...
Click to collapse
Can you boot into recovery? We now have a custom recovery for locked bootloaders (and CM roms). If you can get into recovery, I would try some adb commands to mount the partitions.
No, no recovery. Just to make sure that I'm not doing it wrong, what is the key combination to boot to recovery?
I have also tried:
Code:
fastboot boot some_recovery_image.img
It says ok, but the phone just hangs at the black screen and becomes undetectable as a fastboot device, until I pull the battery. So, unless the some_recovery_image.img is unsuitable for my P760 (which may be!), there is something seriously wrong I think.
Or maybe I can try the same command with the custom recovery for bootloader locked phones... Where can I find it?
ciccillover said:
No, no recovery. Just to make sure that I'm not doing it wrong, what is the key combination to boot to recovery?
I have also tried:
Code:
fastboot boot some_recovery_image.img
It says ok, but the phone just hangs at the black screen and becomes undetectable as a fastboot device, until I pull the battery. So, unless the some_recovery_image.img is unsuitable for my P760 (which may be!), there is something seriously wrong I think.
Or maybe I can try the same command with the custom recovery for bootloader locked phones... Where can I find it?
Click to expand...
Click to collapse
Your EMMC partition is wiped or fried... you really need a JTAG service or a Box like octopus because your L9 is Hard-bricked...
Thanks for your opinion. Yet, I still want to hear from others.
I'm running into more and more problems with the L9 as their me grows.
-Fastboot doesn't work under Windows 8.1 and 10, but under the now obsolete(for me) Windows 7, unlike my other devices, which are fine with Win 10.
-ADB seems to work, but requiring the device to be still able to boot.
-I always boot to recovery from within Android as long as the L9 ain't bricked. After a failed rom install, during which the sd card failed(could no longer write or be formatted afterwards, the last time stamps of files and folders were set during the failed install) I discovered a problem with TWRP(Artas182x's and Edwin's), which may have been present since a long time: Trying to invoke TWRP via keypress will brick the device!
So, if my P760 no longer boots, there's only download mode available, sort of the final line of defense.
-There's sort of a trick if even download mode fails: After a failed attempt unplug phone, force switch-off, if the phone is in brick state. Then switch on, force switch-off again, and only then attempt download mode again. And have patience while holding down the vol button, it might take up to 20 seconds for the phone to switch itself on into download mode. (A single forced powerdown will cause Fastboot NOT to work the next time)
But I'm absolutely clueless about the recovery issue, for now TWRP is semi-working, can only be accessed via Android, as long as the phone is fully working.
W/o Fastboot, I now have flashed stock rom several times and rooted it with Kingo rooter just to be able to run Flashify to install TWRP. If Flashify is the culprit for the TWRP issues, I could need a recommendation for a better working app.
ciccillover said:
Thanks for your opinion. Yet, I still want to hear from others.
Click to expand...
Click to collapse
Tried OMAP flasher ? It needs memory configuration file in order to work with our device
No, I didn't. I have sold the phone for spares.
Inviato dal mio LG-D855 utilizzando Tapatalk
I never needed the OMAP drivers and tools. As they are ancient, they will probably make even more problems with newer Windows versions.
I could by no means invoke Fastboot on this device with Windows 8.1 and 10, Seven worked. So you had to go for Download Mode instead to recover to stock rom, then root with the Kingo tool, then install TWRP via Rashr or Flashify, the most time consuming way to recover from the frequent bricks.
And the LG Flash Tool 2014 always needed several attempts to get the job done. The latest official recovery tool from LG works in D/L Mode, but will always download the rom image anew.
I did everything that was stated in the how to's but to no avail. additionally i cant get TWRP installed via fatboot, i have checked and crosschecked usb debugging and unlock OEM , but i cant get it to work , with SP Flash my phone pops up and vanishes in the hardware manager withing fractions of a second so it doesnt work with the sp Flash , in fastboot it wont let me download to recovery even if i use the command line oem unlock , because the volume up button that you have to use to accept[yes] doesnt work , only the vol down[no ] button has an effect, anyone any ideas anyone?
?
Kylekassar said:
I did everything that was stated in the how to's but to no avail. additionally i cant get TWRP installed via fatboot, i have checked and crosschecked usb debugging and unlock OEM , but i cant get it to work , with SP Flash my phone pops up and vanishes in the hardware manager withing fractions of a second so it doesnt work with the sp Flash , in fastboot it wont let me download to recovery even if i use the command line oem unlock , because the volume up button that you have to use to accept[yes] doesnt work , only the vol down[no ] button has an effect, anyone any ideas anyone?
?
Click to expand...
Click to collapse
To use SP Flash tools, turn the phone off, press download on the software then plug the phone in. The preloader is only meant to show for a short time (a fraction of a second to a few seconds) so SPFT needs to be sending the signal to download in that time window.
What I've also found works is to press download on SPFT then press and hold power and volume up until the device starts downloading.
thx for the quick answer i will try a.s.a.p.
Kylekassar said:
thx for the quick answer i will try a.s.a.p.
Click to expand...
Click to collapse
Tried but it doesnt work , i starts the dload but then i end up on brom error : STATUS_PRELOADER_INVALID(0xC0030004) no recovery flashed
Kylekassar said:
Tried but it doesnt work , i starts the dload but then i end up on brom error : STATUS_PRELOADER_INVALID(0xC0030004) no recovery flashed
Click to expand...
Click to collapse
That could be a couple of things:
Which SPFT version are you using? If its an older version try using a newer one.
Or
The scatter file you loaded is not good, download a stock firmware and use the scatter file from that.
Try this:
fastboot flash recovery "filename".img
or
fastboot flash boot "filename".img
Do you have the MTK drivers installed? What does your phone appear as in the Device Manager? Like others have said, once you've chosen your scatter file and recovery to flash, hit download and then plug in the phone.
Managed to fix this? I have the exact same problem and not able to fix it till now....
I'm in a similar situation. I CAN get my phone to flash recovery in SPFT and get a lovely big green tick but when I power off and boot into recovery using power and volume up it boots into the stock android recovery rather than TWRP.
Going another way via ADB, I can get the phone detected but when I send the OEM unlock bootloader command I am unable to use volume up to confirm. Only the volume down key works to cancel.
All I want is to put viper4android on. Never had any issues until this phone.
chandlerp said:
I'm in a similar situation. I CAN get my phone to flash recovery in SPFT and get a lovely big green tick but when I power off and boot into recovery using power and volume up it boots into the stock android recovery rather than TWRP.
Going another way via ADB, I can get the phone detected but when I send the OEM unlock bootloader command I am unable to use volume up to confirm. Only the volume down key works to cancel.
All I want is to put viper4android on. Never had any issues until this phone.
Click to expand...
Click to collapse
Are you 100% sure the recovery.img you flashed was TWRP?
Absolutely. Downloaded from this very site. It was this one: recovery_TWRP_3021_P9000.img
---------- Post added at 02:23 PM ---------- Previous post was at 02:17 PM ----------
Did an OTA update this morning and am showing as on build number Elephone_P9000_20160608 now. Haven't tried flashing since the update as I'm at work with locked down computers. Was going to try again over the weekend. Which recovery and version of flash tools would you recommend trying this time?
thanks for any advice.
Actually I have the same problem.
I tried to reinstall the drivers because it seems to be not the correct one. Here is a pic: i.imgur.com/FoUnVyz.png
After I read somewhere that i can try and hold down Volume+ while connecting my phone to the pc where i started the download in sp tools prior.
I got this error code: STATUS_PRELOADER_INVALID(0xC0030004)
And here I am with a not-up-to-date elephone p9000.
Anybody care to help me?
I'm in the same situation, tried everything - flashtool recovery.img separate in download mode, flashtool in update mode full 7.0 with replaced original recovery.img with TWRP one, played with fastboot with no luck as did not find the way to OEM UNLOCK it - vol + not reacting. Bought the phone on Gearbest, looks like it's locked very hard.
Can't install TWRP
Me too! I've updated my p9000 to latest stock v7 rom with spft. I can't install twrp recovery despite getting a geen tick from spft. Tried four times but it won't overwrite the stock rom recovery. A locked bootloader seems to be the popular diagnosis but spft doesn't use the bootloader. What else could it be? Ideas very welcome.
Did you boot into recovery immediately after flashing? A normal system boot will overwrite TWRP with the stock recovery. Once you start TWRP there is an option to prevent this from happening.
Can't install TWRP
Thanks for the suggestion. I flashed twrp again but it won't boot into recovery afterwards without a restart, just hangs. Stiĺl on stock recovery.
So i wanted to flash a new firmware on my MTK Device (UleFone Power 2), but i ran into some Errors while doing so, thus , my phone died in the process.
Following Errors occurred, depending on which (SP Flash Tool;SPMultidownloadflashtool;etc) you use:
Errors:
Internal Buffer
STATUS_SEC_IMGHDR_TYPE_MISMATCH
Through digging and asking on the web, two wonderful and very very helpful people: alterogi and finally Sunray888
This solution popped up. Thank you so much to both of them!!
Solution:
But first: You are now warned, try this at your own risk.
Quoted from Sunray888, alterogi. Credits to them.
My German Guide (more detailed with Pictures): Outside of XDA
Side Note: For the UP2 Rom you use SPMultiPortFlashDownloadProject , for the UK6P ROm you use SPFlashTool.
(Links & Attachments below!) (Adb-Fastboot.zip & Checksum.zip)
Part1:
1. Download all the files. (Below are the links and attached files.
2. Extract each zip to its own folder. Then Put the files of the Checksum.zip into the ROM Folder of the Ulefone Power 2.
3. Run the Checksum.exe and wait until it is done. It will show up in the black CMD when it's finished. A new Checksum.ini should be in the folder now.
Part2:
1. Make a backup of your NVRAM and NVDATA, a full ROM backup if you can.
2. Get the Oukitel K6000 Plus ROm Version 2.0 Ready. Extract it to its own folder somewhere on your desktop.
3. Open the SPFlashtool and select the android scatter file of the Oukitel Rom.
4. Connect your phone, hold Volume down and press on "Download" in the SPFlashTool. Now you wait for the process to end, WHILE still holding the button down.
5. After it is done flashing your new Firmware unto your phone, start it like you would normally do. Disconnect your phone now. You can now also skip the Setup Details, since we still have to flash the original Firmware.
6. Go to Device Infos on the bottom of your phone settings, tap a few times on Build Number until the Developer Options activate. Go back and tap on Developer Options.
7. In here you activate OEM Unlock and USB Debugging. Back to the pc: Now you open a CMD Windows and navigate to your extracted ADB-Fastboot Folder. (Some Pictures of this are on my German Tutorial Thread, Link above).
8.Connect your phone, tick the avaible spot of the upcoming new popup notification. Shutdown your phone now. Hold Volume Up and Power Button at the SAME Time until the Fastboot Menu pops up.
Make sure your phone is still connected to the pc.
9. In the cmd window you will now have to type the following thing: fastboot oem unlock
9.5 Another Method to get into fastboot mode: (OR enabled usb debug, accept connection between your PC and Ulephone and send command fastboot reboot bootloader after that "fastboot oem unlock")
10. After the process is done. You are still in fastboot mode.
And let the phone connected to the Pc.
11. Now you have to flash the original ROM/Firmware. In this case only Version 17 will work.
On this step i had a lot issues with "insufficient buffer"-Errors under SP Flash tool, but there is a solution for this.
Be careful :
Try to use #SPMultiPortFlashDownloadProject Version 3.1620 - only this software worked for me,earlier Versions i tried ( v.3.1636 ) always showed an Error.
Current Status: Phone is still connected to pc, fastboot mode, oem has just been unlocked by yourself.
What to do now:
12 Open the SPMultiPortFlashDownloadProject, load scatter file of the Ulefone Power 2 Firmware, then press scan. Nothing will happen now, so be quick: Don't disconnect your phone.
Press Volume Up + Power Button at the same time to simulate a new connection to the pc. While the phone is still connected via cable! We have to do this. You will now hear a sound which you normally would here when connecting a new device to your Pc. Now you just have to keep holding the Volume Up Key.
IMPORTANT:
Don't let go of the button until the Programm shows up a Green Tick which signals the end of the Process. Now you can let go of the button.
13. After the scan has finished, press start and flash firmware. But how? It's easy. Just do the same again. ->>
13.1 Press Start in the Flash Programm.
13.2 We have to simulate a new connection. Hold Vol+ and Power Button. Until you hear the sound again, now only keep holding the Vol+ Button.
14. Wait for the green Tick Notification. Until then: Don't you dare let go of the Vol+ Button. When it shows up, you're pretty much done. Congrats!
15. Restore NVRAM and NVDATA.[/I] through mtk engineering mode: open dialer and call *#*#3646633#*#* , scroll down to GRPS and type in your IMEI (can be found in the box, in which your phone came shipped with). If it says something like that it's successfully written.-> Activate Airplanemode, wait a few seconds, deactivate it, activate Mobile Data Connection and wait. It should show a mobile data active.
Download Links: (I didn't upload those files,i simply shared the links, all credits to their respective owners. Use at your own risk.!)
UP2 Rom: Google Drive
Flashtool for UP2 Rom: One Drive
UK6P 2.0 + Flashtool: Click me
Checksum Gen Zip: --Below--
ADB Components: --Below--
UPDATING:
After flashing V15 Ulefone Firmware, use the SP FLASH TOOL to flash the newest firmware via "Firmware Upgrade" mode. remember to keep pushing vol up before connecting phone!
How to:
Press Download in Tool
Push and hold vol up
Connect cable to pc.
wait until green tick shows up.
Profit.
Same situation here. I've tried flashing with and without battery, no success. I can confirm that I did NOT lock the bootloader. Not that it helps me much.
I've tried using different versions of SPFT in addition to the multiport tool, but they either don't work with Power 2 scatter file, or show the same error.
This can potentially be a driver / USB issue, so I will probably try that next (different computer, fiddle with the drivers). I've also seen claims that SPFT v3 can happily flash over this, and then newer versions start working too, so try that if you can. It did not work for me - the download never starts on my computer with v3.
I can also add that I can flash preloader as well, although I try and leave that off when possible. The modem and lk* partitions show the same error you have, though, and the phone is dead.
I have managed to resolve this with a lot of help from Vivanyok on 4pda.
1. Make a backup of your NVRAM and NVDATA, a full ROM backup if you can.
2. Download Oukitel K6000 Plus ROM v2.0. Only this version will work.
3. Flash it. It will actually work just fine, no errors. I've used the latest SPFT.
4. Boot the phone into Android. In Developer Options, enable OEM Unlock.
5. Reboot into fastboot, do fastboot oem unlock.
6. After this, you can simply flash any Ulefone ROM for Power 2. Win!
7. Restore NVRAM and NVDATA.
Hope this helps somebody.
Thanks for your reply!! I will try that and report back ! I'm so glad there are people out here who help !
EDIT: OMG, You are my hero!!! The Flash Process went just fine, no errors. It boots up. Thank you so much! Now i can flash like a devil again, haha
EDIT2: So i could use the phone with the oukitel rom but i want the original rom, firmware.
So here is the other Problem. I can't flash them. I either get insufficient buffer error or the imghdr error.
Could you link me what you are using? I really need the phone. Thanks for your help in advance.! :S
Hi sm00th4f3
I add some advices to Vivanyok instruction by red letters --->
I have managed to resolve this with a lot of help from Vivanyok on 4pda.
1. Make a backup of your NVRAM and NVDATA, a full ROM backup if you can.
2. Download Oukitel K6000 Plus ROM v2.0. Only this version will work.
3. Flash it. It will actually work just fine, no errors. I've used the latest SPFT.
4. Boot the phone into Android. In Developer Options, enable OEM Unlock.
5. Reboot into fastboot, do fastboot oem unlock.
OR enabled usb debug, accept connection between your PC and Ulephone and send command
fastboot reboot bootloader
after that
fastboot oem unlock
6. After this, you can simply flash any Ulefone ROM for Power 2. Win!
on this step i had a lot issue with insuffitient buffer under SP Flash tool, but yesterday i win too.
be careful :
after oem unlocking you should NOT reboot ulephone to Android,let phone stay connected to PC
try use #SPMultiPortFlashDownloadProject version 3.1620 - only this soft help me,earlier i tried v.3.1636 but always error appear.
and when i started flashing i stayed ulephone connected to usb (i dont disconnect phone after oem unlocking) and i simulated connection by long press volume UP + Power buttons. You can control connection by default PC sound.
due in SPMultiPortFlashDownloadProject other interface i did not change flashing type, it was firware update by default.
After that my ulefone become alive.
7. Restore NVRAM and NVDATA.
good luck, if any questions ask me on 4pda.ru
So, i tried your nice guide, and it finally worked!! Side Note is: After fastboot oem unlock you have to scan with the #SPMultiPortFlashDownloadProject version 3.1620 your phone first, and then like you have already said, use the volume up+power button combo to simulate a connection. and then it will be flashed. Holy crap. Thank you so much!!.
You are welcome, last three day i also tried flash my up2
Still same problem
..
---------- Post added at 01:21 PM ---------- Previous post was at 01:18 PM ----------
Hi there,
Thanks for the instructions. I have succeeded to install the Oukitel V2.0 ROM on my Ulefone Power 2 and change OEM in Android and fastboot but still no success to flash the final Ulefone Power 2 phone ROM from the Ulefone web site. The flash process starts but after two or three download steps the flash tool (3.1620 in administrator mode) stops still with the STATUS_SEC_IMGHDR_TYPE_MISMATCH error.
I have also tried with another ROM coming from another site, but still same error.
Could perhaps provide me a download link to a ROM that you successfully flashed to the Ulefone Power 2?
Thanks for your help
bletru said:
..
---------- Post added at 01:21 PM ---------- Previous post was at 01:18 PM ----------
Hi there,
Thanks for the instructions. I have succeeded to install the Oukitel V2.0 ROM on my Ulefone Power 2 and change OEM in Android and fastboot but still no success to flash the final Ulefone Power 2 phone ROM from the Ulefone web site. The flash process starts but after two or three download steps the flash tool (3.1620 in administrator mode) stops still with the STATUS_SEC_IMGHDR_TYPE_MISMATCH error.
I have also tried with another ROM coming from another site, but still same error.
Could perhaps provide me a download link to a ROM that you successfully flashed to the Ulefone Power 2?
Thanks for your help
Click to expand...
Click to collapse
Look in your inbox, i wrote you a private message.
bletru said:
..
---------- Post added at 01:21 PM ---------- Previous post was at 01:18 PM ----------
Hi there,
Thanks for the instructions. I have succeeded to install the Oukitel V2.0 ROM on my Ulefone Power 2 and change OEM in Android and fastboot but still no success to flash the final Ulefone Power 2 phone ROM from the Ulefone web site. The flash process starts but after two or three download steps the flash tool (3.1620 in administrator mode) stops still with the STATUS_SEC_IMGHDR_TYPE_MISMATCH error.
I have also tried with another ROM coming from another site, but still same error.
Could perhaps provide me a download link to a ROM that you successfully flashed to the Ulefone Power 2?
Thanks for your help
Click to expand...
Click to collapse
That will help many others like me.please post the ule stock rom you flashed and the flash tool.
SUNRAY888 said:
Hi sm00th4f3
I add some advices to Vivanyok instruction by red letters --->
I have managed to resolve this with a lot of help from Vivanyok on 4pda.
1. Make a backup of your NVRAM and NVDATA, a full ROM backup if you can.
2. Download Oukitel K6000 Plus ROM v2.0. Only this version will work.
3. Flash it. It will actually work just fine, no errors. I've used the latest SPFT.
4. Boot the phone into Android. In Developer Options, enable OEM Unlock.
5. Reboot into fastboot, do fastboot oem unlock.
OR enabled usb debug, accept connection between your PC and Ulephone and send command
fastboot reboot bootloader
after that
fastboot oem unlock
6. After this, you can simply flash any Ulefone ROM for Power 2. Win!
on this step i had a lot issue with insuffitient buffer under SP Flash tool, but yesterday i win too.
be careful :
after oem unlocking you should NOT reboot ulephone to Android,let phone stay connected to PC
try use #SPMultiPortFlashDownloadProject version 3.1620 - only this soft help me,earlier i tried v.3.1636 but always error appear.
and when i started flashing i stayed ulephone connected to usb (i dont disconnect phone after oem unlocking) and i simulated connection by long press volume UP + Power buttons. You can control connection by default PC sound.
due in SPMultiPortFlashDownloadProject other interface i did not change flashing type, it was firware update by default.
After that my ulefone become alive.
7. Restore NVRAM and NVDATA.
good luck, if any questions ask me on 4pda.ru
Click to expand...
Click to collapse
cannot find the up2 rom which can be flashed after flashing Oukitel K6000 Plus ROM. Please help...
Download Links added. There shouldn't be any problems using my method as long as you think as well.
Be aware that you have to use the Flashtool i linked, the exact same Flashtool Version as mentioned. Otherwise go to my german thread outside of xda to get more detailed pics.
solved my problem
this was the solution for me, thanks a lot....
recovered!
Hello guys! Thanks for the instructions, it worked great! Only thing, the fastboot you supplied has an password, so I used another I found online.
I finally got time to take care of my bricked Power 2 phone, and I got it back to life using the Oukitel method.
The phone works great, I only had to input IMEI numbers manualy.
Is there a need to lock back the bootloader, because now my device says "orange state", your device cannot be trusted?
hm hm.... fastboot allows me to lock the bootloader, but then the phone would reset itself to factory state for security reasons, so I will leave my bootloader unlocked, as I don't want to go trough the phone app installation and getting the settings to my taste
i just updated the zip..there shouldn't be a password anymore. ^^
For us, there isn't really a need to lock the bootloader. Since we can simply install every ota update by downloading the new rom from external sites. Just a reminder: don't use the ota update app since it will brick or just not work, since your bootloader is unlocked.
Ulefon power 2
ULEPHON POWER 2
Oukitel k6000 Plus Roma- ok
SPMultiPortFlashDownloadProject verziju 3.1620 FL-OK, DL FAIL ???? HELP HELP
[email protected]
brumen1 said:
ULEPHON POWER 2
Oukitel k6000 Plus Roma- ok
SPMultiPortFlashDownloadProject verziju 3.1620 FL-OK, DL FAIL ???? HELP HELP
[email protected]
Click to expand...
Click to collapse
don't forget to enable oem unlock (bootloader isn't unlocked yet after you do this)
then fast boot the phone with oukitel rom, unlock the bootloader with adb fast boot unlock
don't let go of the vol button while flashing the phone with multiport flash tools
don't use ulepfhone original cable, mine was not working ok although there was no visual damage to the cable. I used another one that fit the usb port on the phone more firmly
bad_ri said:
don't forget to enable oem unlock (bootloader isn't unlocked yet after you do this)
then fast boot the phone with oukitel rom, unlock the bootloader with adb fast boot unlock
don't let go of the vol button while flashing the phone with multiport flash tools
don't use ulepfhone original cable, mine was not working ok although there was no visual damage to the cable. I used another one that fit the usb port on the phone more firmly
Click to expand...
Click to collapse
The Original Cable is fine...the problem might only be with yours.
brumen1 said:
ULEPHON POWER 2
Oukitel k6000 Plus Roma- ok
SPMultiPortFlashDownloadProject verziju 3.1620 FL-OK, DL FAIL ???? HELP HELP
[email protected]
Click to expand...
Click to collapse
Read the thread, it's not that difficult.
sm00th4f3 said:
The Original Cable is fine...the problem might only be with yours.
Click to expand...
Click to collapse
maybe, just told what happened in my case, the original cable was bad from the first day
good luck with the flash
1-step
in order to root these qilive devices you will need...
magisk manager apk v5.6.4
stock boot.img file
working ADB to unlock oem and flash
2-step
lets get to it
place the magisk.apk and the stock boot.img
in the internal memory of your phone (downloads)
if you like to keep stuff organized :good:
3-step
follow the vídeo tutorial and use magisk manager
to patch your stock boot.img it will output a new
boot.img that includes magisk Root (patched_boot.img)
https://www.youtube.com/watch?v=BF4_hnKgjFA
ps: major ty to hovatek team for this great tutorial
step-4 use Google drive or usb OTG to get the patched_
boot.img to your PC and place it in the ADB folder
once you have oem(bootloader) unlocked just
rename the patched_boot.img to boot.img
step-5
unlock oem, these qilive devices wont unlock
the bootloader even if you enable it in DEV options
enable USB debug in dev options
you will need to use ADB commands
command- adb devices
serial appears
command- adb reboot bootloader
phone reboots to fastboot mode
command- fastboot devices
serial appears
command- fastboot oem unlock
(MAJOR WARNING the fastboot
oem unlock will wipe/reset/factoryreset/delete your data)
after you give the command small letters will appear
on the phone screen(yes or no) hard to read dont be hasty plz
use VOLUME+ to select and VOLUME - to confirm
note: when my phone ended the unlock it whent back to
that black screen where you choose fastboot-recovery-restart
and was stuck there, side keys did nothing if this happens
just long press the power key for 10 sec it will shutdown
then press power again to turn on
first boot after unlock will take longer then normal dont freakout
after you unlock small letters will appear during boot up saying the device
is not safe unlocked ,you can later use ( fastboot oem lock )
step-6
flash the patched boot.img with ADB
command- adb devices
serial appears
command- adb reboot bootloader
phone reboots to fastboot mode
command- fastboot devices
serial appears
command- fastboot flash boot boot.img
finished/ok
command- fastboot reboot
and voila you should now have magisk
installed in the app drawer, open it!!
step-7 run the install one final time from the
magisk manager and install magisk V16 using
recomended option it will verify/patch the boot image
Do NOT select the AVB 2.0 BOX it will bootloop the phone
and your done, enjoy your qilive rooted phone.
from this point on you can use the fastboot
command- fastboot oem lock
to remove the letters in boot up about the
device not safe unlocked
WARNING oem lock
will WIPE/FACTORY RESET again (god damn it!!)
ps: i had to install twice in a row,major pain in the ....
Repeat step 7 after Wipe/Reset
here is the stock boot for 2 qilive models
you can get the stock firmware for any qilive
at this site www.doc-doapi.com/EM/qilive/smartph...te_3m-fdd-cs_mul_20170818-110645_songlixin_PC
and get the recovery or boot from the unpacked firmware file
ps:my phone is the Q8SIN4GP AND ITS WORKING FINE
A VERY SPECIAL TY to topjohnwu (magisk creator), this man is nothing
short of a God damn genius!! , and if you can donate to him.
hope this helps other qilive users to root:highfive:
quick note on the qilive models, they have two model names
the cliente name in my case Q8SIN4GP
and the factory name in my model its 882912
in order to download the right firmware for your model
you need the factory model witch is what appears in the qilive
site above, it will be in the back of the phone or the original
box on a sticker just bellow the bar code, full model exempl
:Q8SIN4GP/882912 my firmware serves several models,
these Q8 models all start with 88xxxx WARNING
dont try this using the wrong firmware/boot file or you will DAMAGE your phone
Help with BOOTLOOP problems, if you find your self stuck in a bootloop
the phone wont go past the qilive logo and just stays there, dont freak out
you will loose your data but there is a way out
just keep pressing power + Volume up until a black screen with 3 options appears
when it does let go, use Volume + to select option and Volume - to confirm
select Fastboot or alternative select recovery and then select reboot to bootloader
both option will place your phone in Fastboot mode, once in fastboot mode
connect your phone to PC and use ADB commands to fix/bootloop
command- fastboot devices
serial appears
command- fastboot oem unlock (skip this if you use phone unlocked)
a confirm action option appears on the phones screen
use Volume up to say YES / or Volume Down to say NO
Warning oem unlock will WIPE/Factory reset your phone
once it finishes the phone will be stuck on the
Recovery/fastboot/restart screen just long press the power key
until the phone shuts down
start the phone again using Power + Volume up when the black
screen with the 3 options come up, let go and use Volume up to
select Fastboot mode and confirm using Volume Down
Once in fastboot connect your phone to PC and use ADB commands
command- fastboot devices
serial apears
Here you will flash the magisk patched_boot.img
the same image you used to root your phone
command- fastboot flash boot boot.img
it will say finished-ok (or similar)
command- fastboot reboot
the boot up time will be longer than normal
but the phone should now complete the boot
and present the inicial setup screen, select language
enter your mail, the usual bla bla...
any way at this point just repeat step 7
to get root running again
sp flash tools v5.1716.
phonedriller said:
1-step
in order to root these qilive devices you will need...
magisk manager apk v5.6.4
stock boot.img file
working ADB to unlock oem and flash
2-step....
Click to expand...
Click to collapse
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
xdacktheresianum said:
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
Click to expand...
Click to collapse
Awsome work congrats, as for the recovery so far no luck so try not to go 2 crazy until a working recovery is up and working , install stericsons busy box this is always the first root app i install
If possible buy sterics busybox pro and titaniumbackup pro if you want to install apps to sd card apps2sd pro all of these can be tested in free
Version,again nice work congrats enjoy you rooted phone :highfive:
xdacktheresianum said:
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
Click to expand...
Click to collapse
give a hungry man fish and you solve his problem for a day or two
teach him how to fish and you solve his problem for life
phonedriller said:
give a hungry man fish and you solve his problem for a day or two
teach him how to fish and you solve his problem for life
Click to expand...
Click to collapse
hi phonedriller,
...well, i must have been an unlucky fisherman
an app i installed ended up giving me a soft brick (bootloop between qilive icon opening screen - btw still with the "warning" of "device is unsafe etc", i.e. oem still open - and black screen, qilive opening screen etcetcetc)
have cleaned cache; went for factory reset; etc
BUT: am presently stuck when trying to go via ADB (which used to work perfectly before) that somehow the usb drivers don't want to get installed properly. as a consequence, desktop cannot see devices.
and i cannot, for the sake of me, remember how i had succeeded before installing usb drivers.
could you please help?
thx
cktheresianum
xdacktheresianum said:
hi phonedriller,
...well, i must have been an unlucky fisherman
an app i installed ended up giving me a soft brick (bootloop between qilive icon opening screen - btw still with the "warning" of "device is unsafe etc", i.e. oem still open - and black screen, qilive opening screen etcetcetc)
have cleaned cache; went for factory reset; etc
BUT: am presently stuck when trying to go via ADB (which used to work perfectly before) that somehow the usb drivers don't want to get installed properly. as a consequence, desktop cannot see devices.
and i cannot, for the sake of me, remember how i had succeeded before installing usb drivers.
could you please help?
thx
cktheresianum
Click to expand...
Click to collapse
PS: adb will not work if the phone is not booting to the OS
it will work if you manualy place the phone in fastboot AKA bootloader
MODE ,you see if it does not boot to OS then usb service is not working
use power + Volume up to enter the black menu
use the Volume up to select fastboot(bootloader) volume - to confirm
connect the phone to your PC
flash the boot.img, the same boot.img used to root (patched by magisk)
to see is adb is ok just run - fastboot devices
if a serial is presented then all other stuff should work
step 1 - reflash the boot img
step 2 - after the flash finishes - fastboot oem lock
message on the phone screen, confirm yes to lock
OEM
step 3- press power until it turns off
it should now complete the start up (boot)
if not working this method let me now
you can still flash the full factory firmware
using SP Flash Tool v5.17xx
phonedriller said:
PS: adb will not work if the phone is not booting to the OS
it will work if you manualy place the phone in fastboot AKA bootloader
MODE ,you see if it does not boot to OS then usb service is not working
use power + Volume up to enter the black menu
use the Volume up to select fastboot(bootloader) volume - to confirm
connect the phone to your PC
flash the boot.img, the same boot.img used to root (patched by magisk)
to see is adb is ok just run - fastboot devices
if a serial is presented then all other stuff should work
step 1 - reflash the boot img
step 2 - after the flash finishes - fastboot oem lock
message on the phone screen, confirm yes to lock
OEM
step 3- press power until it turns off
it should now complete the start up (boot)
if not working this method let me now
you can still flash the full factory firmware
using SP Flash Tool v5.17xx
Click to expand...
Click to collapse
dearphonedriller,
thank you so much for your speedy help.
followed the steps given by you. all is well, as you predicted, until step 3.
however:
phone (now without the "orange state" message, i.e. oem locked) still bootloops and short of ADB "fastboot devices" the desktop doesn't see the phone (and driver installation continues to fail), as per your PS (thanks!) i guess flashing the full factory firmware ("RC-mt6737...zip" quoted by you in your very first post) is next.
would you please point me to a basic-for-noobs tutorial or instruct me on the step-by-step commands/procedures using this zip file?!
HUGE thanks
ckth
xdacktheresianum said:
dearphonedriller,
thank you so much for your speedy help.
followed the steps given by you. all is well, as you predicted, until step 3.
however:
phone (now without the "orange state" message, i.e. oem locked) still bootloops and short of ADB "fastboot devices" the desktop doesn't see the phone (and driver installation continues to fail), as per your PS (thanks!) i guess flashing the full factory firmware ("RC-mt6737...zip" quoted by you in your very first post) is next.
would you please point me to a basic-for-noobs tutorial or instruct me on the step-by-step commands/procedures using this zip file?!
HUGE thanks
ckth
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=-zaEmj3-prU
turn the phone off, follow the video
flashing the full firmware is actualy easy
https://forum.hovatek.com/thread-13970.html
or searh sp flash tool here on xda
https://www.youtube.com/watch?v=LzyYXAflmOk&t=125s
phonedriller said:
https://www.youtube.com/watch?v=-zaEmj3-prU
turn the phone off, follow the video
flashing the full firmware is actualy easy
https://forum.hovatek.com/thread-13970.html
or searh sp flash tool here on xda
https://www.youtube.com/watch?v=LzyYXAflmOk&t=125s
Click to expand...
Click to collapse
thank you, phonedriller
everything worked perfectly via SPFlash Tool.
and, referring back to our above questions re the possibility of getting TWRP onto the phones, a developer friend of mine writes me this:
>try to flash TWRP:
>Download following files from this link:
>https://mega.nz/#F!qZIgnJRK!5apBfYo1je0ytg-wmA6JMQ
>- Odin3 v3.12.3 (Complete folder)
>- twrp-3.2.1-0-Q8S55IN4G2-20180318.tar
>1. Start your Phone into download mode
>2. Start Odin (Odin3 v3.12.3\Odin3.exe)
>3. Click on Options and unmark Auto Reboot
>4. Click AP and select twrp-3.2.1-0-Q8S55IN4G2-20180318.tar
>5. Press Start and wait until finished (Reset or OK!)
>6. Restart your phone immediatly to recovery mode
>7. In TWRP Recovery click on mount
>8. Set the checkbox checked at system (that system is mounted)
>9. go back and click on advanced
>10. Open file manager
>11. navigate to system/build.prop and click on build.prop
>12. Click on chmod
>13. type: 0644 and hit the accept button on screen or at the virtual
>keyboard on your phone
>14. restart your phone
i haven't tried this, but am wondering whether it might seem "reasonably possible" when reading through it.
thanks
ckth
Do you perhaps have link to Q8S5IN4GP stock rorm? Mine came with malware installed on it. I want to see if those were chinese who preinstalled or or was it decided by Auchan.
tommo1982 said:
Do you perhaps have link to Q8S5IN4GP stock rorm? Mine came with malware installed on it. I want to see if those were chinese who preinstalled or or was it decided by Auchan.
Click to expand...
Click to collapse
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
phonedriller said:
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
Click to expand...
Click to collapse
I had issues with adds being displayed at home screen and I was not able to close them. I had to use NetGuard to find that FOTA talks to 'adsup' and it is a known malware provider. I learned that some of the system apps try to talk with Alibaba servers and AdOppo (whatever it's called). Kaspersky might not be wrong, actually.
I'm trying to download stock firmware, but I don't know the file name. The website with it is locked, so unless I know exactly what I need, I cannot download it.
phonedriller said:
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
Click to expand...
Click to collapse
Yes i noticed the site now asks for a login that i dont have,but it was open to all until recently i have the firmware file in my pc,a few days ago i went to check for firware updates and the site was diferent and closed , in the site the download link was 882912/****** this firmware services at least 3 similar models
phonedriller said:
Yes i noticed the site now asks for a login that i dont have,but it was open to all until recently i have the firmware file in my pc,a few days ago i went to check for firware updates and the site was diferent and closed , in the site the download link was 882912/****** this firmware services at least 3 similar models
Click to expand...
Click to collapse
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
phonedriller said:
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
Click to expand...
Click to collapse
Ps use root + apps2sd or titaniumbackup to stop/disable the bad apps and replace them with playS app,not possible on all apps of course
phonedriller said:
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
Click to expand...
Click to collapse
I'm thinking about Android 8.1 with it's Treble project. I might not be knowledgable enought to compile and flash it, though.
tommo1982 said:
I'm thinking about Android 8.1 with it's Treble project. I might not be knowledgable enought to compile and flash it, though.
Click to expand...
Click to collapse
Flashing is super easy use spflashtools or. Odin compiling a Rom is not , were you able to get the original firmware? You will need the original firware to get the boot and partition info from what i read so far
Unfortunately not. I will ask at the shop where I bought it how to contact tech. It should be freely available. I don't understand why Qilive restricted access to firmware.
I'll post when I learn anything.
Well, you can download the firmware if you know the file name. The bad news is, it seems the stock firmware has malware preinstalled. If there is anyone who could help confirm it. I have the ROM, and I can upload it to Google Drive if needed.
Hi all,
I'm coming back to a question lingering since the very first post here and mentioned again in post #9:
Is there a successful way to install TWRP on this Qilive model?
Re this topic:
- has anybody tried/has anybody been successful with the procedure described in post #9?
and
- has anybody seen the following TWRP builders' version (do an in-page search on Q8S55IN4G2)
https://twrpbuilder.github.io/fr/downloads/twrp/
with the download belonging to it
https://androidfilehost.com/?fid=890129502657591798
???
any successful installations to report???
Wouldn't THAT be great!!??
thanks
xdack