DISCLAIMER
I am not to be held responsible for any of the damage that occurs to your device during this process. You are yourself responsible for any damage done (if) to your device during this process.
REQUIREMENTS
Make sure your device is charged above 80%.
We recommend creating a backup of all your important files before beginning with this process.
HOW TO INSTALL STOCK ROM IN MOTO X4:
Download Moto X4 Stock Firmware from below (in download section).
Install Motorola Driver and ADB Fastboot Driver on your PC.
Now extract stock firmware in ADB Fastboot folder.
Now, turn off your device and boot into bootloader by pressing volume down button +power button simultaneously.
Now, connect your device to your PC via a USB Cable.
Open a command prompt window and type the following commands:
Code:
[/B]
fastboot devices
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash boot boot.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot erase cache
fastboot erase carrier
fastboot erase clogo
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot reboot
pause>nul
DOWNLOADS
https://drive.google.com/file/d/1_pYOrsub68aN-iILy3EcFNZusldSA1Td/view?usp=sharing
https://www.androidfilehost.com/?w=files&flid=268775
Thanks for lohanbarth for the instructions.
Enjoy.
leogeeko said:
Guys,
After I incorrect downgraded my phone, a friend of mine that have a Motorola Service Provider downloaded the latest firmware for me.
https://drive.google.com/file/d/1_pYOrsub68aN-iILy3EcFNZusldSA1Td/view?usp=sharing
For instructions to Flash, follow the lohanbarth post: https://forum.xda-developers.com/moto-x4/development/flash-official-frmware-moto-x4-t3730750
Enjoy.
Click to expand...
Click to collapse
Valeu cara!
Primeira Rom RetBR que eu vejo, quero ver se com ela da pra fazer um boot.img do magisk.
leogeeko said:
Guys,
After I incorrect downgraded my phone, a friend of mine that have a Motorola Service Provider downloaded the latest firmware for me.
https://drive.google.com/file/d/1_pYOrsub68aN-iILy3EcFNZusldSA1Td/view?usp=sharing
For instructions to Flash, follow the lohanbarth post: https://forum.xda-developers.com/moto-x4/development/flash-official-frmware-moto-x4-t3730750
Enjoy.
Click to expand...
Click to collapse
Is this the A1 version?
Slickademo said:
Is this the A1 version?
Click to expand...
Click to collapse
Most likely not since there were no A1 in Brazil and it says XT1900-06 which is the BR Variant.
Also, in the file name, there's no AMZ nor FI, so it only lasts Retail.
I could be wrong thou.
Slickademo said:
Is this the A1 version?
Click to expand...
Click to collapse
No, it's the retail ROM, but the Brazilian rom received only the April patch, not 8.1.
Slickademo said:
Is this the A1 version?
Click to expand...
Click to collapse
Retail
Anyone tried on indian version ?
leogeeko said:
Guys,
After I incorrect downgraded my phone, a friend of mine that have a Motorola Service Provider downloaded the latest firmware for me.
https://drive.google.com/file/d/1_pYOrsub68aN-iILy3EcFNZusldSA1Td/view?usp=sharing
https://www.androidfilehost.com/?w=files&flid=268775
For instructions to Flash, follow the lohanbarth post: https://forum.xda-developers.com/moto-x4/development/flash-official-frmware-moto-x4-t3730750
Enjoy.
Click to expand...
Click to collapse
can you share screenshot of about phone
mujju85 said:
can you share screenshot of about phone
Click to expand...
Click to collapse
What for? The ROM is original. There is nothing different to see
leogeeko said:
What for? The ROM is original. There is nothing different to see
Click to expand...
Click to collapse
After installing this my phone got boot looped and I had to flash older version and also wiped off data to get back my phone working
mujju85 said:
After installing this my phone got boot looped and I had to flash older version and also wiped off data to get back my phone working
Click to expand...
Click to collapse
Make sure that the script you used to flash have all the files listed for flashing that are contained in the zip drive.
Mine just worked flawlessly. I don't know if there is any difference between the Brazilian Retail Phone to the Indian one.
leogeeko said:
Make sure that the script you used to flash have all the files listed for flashing that are contained in the zip drive.
Mine just worked flawlessly. I don't know if there is any difference between the Brazilian Retail Phone to the Indian one.
Click to expand...
Click to collapse
yes i have tried couple of times still cant manage to run this rom
mujju85 said:
yes i have tried couple of times still cant manage to run this rom
Click to expand...
Click to collapse
Really wierd. Definitely you should check your phone or the script you're running. I will upload the one I used when I get home
mujju85 said:
yes i have tried couple of times still cant manage to run this rom
Click to expand...
Click to collapse
Hey Mujju,
I´ve downloaded both files and reflashed my phone twice and everything ran smoothly.
I uploaded the code from that script I´ve used. It is different from the Lohanbarth post. Give it a try with my script and see how it goes.
If it does not work, we may have found the first "incompatibility" between X4 models.
Ok I will try and let you know thanks for the the new script
Finally it's works now I am on April security patch thanks again
Screenshot
mujju85 said:
Finally it's works now I am on April security patch thanks again
Click to expand...
Click to collapse
:good::good::good::good::good:
mujju85 said:
Anyone tried on indian version ?
Click to expand...
Click to collapse
Few days ago I went to the service centre..After that don't know how I got April 2018 security patch..
All the Indian version is still on December 2017...
Also built number changed to OPWS27.2.2 Motorola Version is OPWS27.57-40-14
SouravSatvaya said:
Few days ago I went to the service centre..After that don't know how I got April 2018 security patch..
All the Indian version is still on December 2017...
Also built number changed to OPWS27.2.2 Motorola Version is OPWS27.57-40-14
Click to expand...
Click to collapse
How did you got this version ?
Related
Disclaimer: I am not responsible for anything that happens as a result of flashing these files.
Latest Build Nougat: 7.1.1_NPSS26.118-19-18
Latest Build Oreo: 8.0.0_OPSS27.76-12-25-15
Note: Motorola doesn't allow downgrading so once u flash O via OTA/Fastboot it isn't recommended to go back to N or any older build than the latest .
Downloads:
Stock N: ALBUS_RETAIL_7.1.1_NPSS26.118-19-18_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Stock O: ALBUS_RETAIL_8.0.0_OPSS27.76-12-25-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
You must already have ADB and fastboot setup, check here if you haven't already as using adb/fastboot isn't within the scope of this thread.
How to Install ADB on Windows, macOS, and Linux
1. Download the file and extract the zip archive
2. Extract all the files to your fastboot folder. (Not needed if you have adb and fastboot added to the path, if you want to know how to do this, check this guide: How to Use ADB or Fastboot From Any Directory on your Windows/Linux PC)
3. Restart the device in fastboot/bootloader mode and connect to your PC.
4. Make sure the system detects the device in fastboot mode, to verify this your command window/terminal shows a serial number when you type:
Code:
fastboot devices
5. Use the following commands now or you can use the flash scripts provided as attachments to this post:
NOTE: SKIP the oem lock begin and the oem lock commands if you dont want to lock your bootloader
Linux users will need to change the extension to .sh and add sudo before each command or directly run it as a root user .
To simply flash, run the "OEM Flash" file; to lock the bootloader, run "OEM Lock" file.
Manual method:
Code:
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (optional: will erase any customizations if ordered through motomaker)
fastboot erase clogo (optional: will erase the custom boot logo if ordered through motomaker)
fastboot oem lock
fastboot reboot
Credits:
JuniorPassos
TeamReviver
Motorola Mobility LLC
Sourceforge
XDA-Developers
So wait... you can fastboot unlock the Verizon model???
Help please.
Hello,
Could you provide complete stock firmware for the Moto Z2 play (Indian unit), while flashing the TWRP 3.1.10 , it is stuck on boot logo, I again go back to your verizon recovery image flash but now it is looping on the boot phase . Please help me , If you find any useful link please provide me. my region is India.
If I do complete flash of your Verizon's model Z2 on my Indian Z2 unit , whether it will work for me ??? If you have any idea for the Z2 play (General Global unit) , please share us, we will be very thankful to you. Main thing is this it is the new phone so very difficult to find and remedy so far. Thanks
niteshpant said:
Hello,
Could you provide complete stock firmware for the Moto Z2 play (Indian unit), while flashing the TWRP 3.1.10 , it is stuck on boot logo, I again go back to your verizon recovery image flash but now it is looping on the boot phase . Please help me , If you find any useful link please provide me. my region is India.
If I do complete flash of your Verizon's model Z2 on my Indian Z2 unit , whether it will work for me ??? If you have any idea for the Z2 play (General Global unit) , please share us, we will be very thankful to you. Main thing is this it is the new phone so very difficult to find and remedy so far. Thanks
Click to expand...
Click to collapse
Verizon operates in US and you flashed that for Indian version.Why?There is no official ROM out yet.
Most importantly you did not backup the ROM.
My advice would be try clearing the cache,factory reset.
Moto by Lenovo doesn't provide regular updates.
It is better to wait until Lineage OS pays a visit.
Cheers
wait how did you unlock the verizon version？
Update
New firmware BUILD NPSS26.118-19-4 for RETAIL models is added to the downloads.
https://www.androidfilehost.com/?fid=889964283620756684
Hi, do you know if is possible to flash the retail firmware to single sim version? (Vodafone, unlocked)
Hello,
I've accidentally did the oem lock...
What can I do to reverse this?
Do I have to send the smartphone back to Motorola?
Says boot image not signed, it does flash the firmware however it does not have fastboot flash system system.img_sparsechunk.7 in the zip folder so it doesn't actually flash it. However it does boot up and work like normal.
any word on this working on the canadian version?
it reads as XT1710-01 in fastboot
in the OS my current build number reads as NPSS26.118-19-11 ... i assume thats just a slightly newer version
and so, installing this would return the phone to pure stock - allow OTA and all that fun stuff?
unerds said:
any word on this working on the canadian version?
it reads as XT1710-01 in fastboot
in the OS my current build number reads as NPSS26.118-19-11 ... i assume thats just a slightly newer version
and so, installing this would return the phone to pure stock - allow OTA and all that fun stuff?
Click to expand...
Click to collapse
FYI, XT 1701-01 is the US unlocked for any carrier version.
Does this work for the xt1710-09 reteu version?
Can't flash this on xt1710-09 reteu. Says boot.img is not signed. I SO DESPERATELY want to relock my bootloader.. but it doesn't seem to work Any ideas?
I can confirm XT1710-01 works for Freedom Mobile in Canada.
I was rooted and the Motorola got into a Recovery bootloop after a security update. Makes me miss the peace of mind of Cyanogen. Hopefully LinageOS will come here soon.
cal800 said:
I can confirm XT1710-01 works for Freedom Mobile in Canada.
I was rooted and the Motorola got into a Recovery bootloop after a security update. Makes me miss the peace of mind of Cyanogen. Hopefully LinageOS will come here soon.
Click to expand...
Click to collapse
I use Titanium Backup to freeze the Motorola Update App. No more update notifications.
Help! First time trying to flash a ROM and it doesn't go well So far
I got my hand on a chinese Model of the phone. It says XT1710-11. From the first day I was fed up with their safecenter telling me everything on my phone was a virus. Then I realised I could not remove it because it was part of the "Firmware". Things got really bad when I could not use Pinterest or Twitter on the phone. I still dont know why.
So I remembered there was this thing called root that might be helpful. I started experimenting on it and I was finally able to root and installed magisk. But I still didnt know what to do so I decided it will be better to just flash a new ROM and found this trhread....
As I am writing this my phone doesnt have a OS, Back up was wiped at a point I even had to reflash TWRP and remount Data to be able to do anything with it.
I have an old iphone5 lying around that I will go back to in the mean time. But guys please help a poor lost soul. Is there a solution to my trouble?
tywinlannister7 said:
Retail Variant
BUILD: NPSS26.118-19-4
https://www.androidfilehost.com/?fid=889964283620756684
Click to expand...
Click to collapse
Add new Retail version.
https://androidfilehost.com/?fid=889964283620776139
NPSS26.118-19-1-2
Patch - December 1, 2017
Junior Passos said:
Add new Retail version.
https://androidfilehost.com/?fid=889964283620776139
NPSS26.118-19-1-2
Patch - December 1, 2017
Click to expand...
Click to collapse
Hello its compatibilty in Reteu 1710-09 ? Very thanks
Regards
Enviado desde mi Moto Z2 Play mediante Tapatalk
iron maiden said:
Hello its compatibilty in Reteu 1710-09 ? Very thanks
Regards
Enviado desde mi Moto Z2 Play mediante Tapatalk
Click to expand...
Click to collapse
Probably. I believe so, because it's a Retail version.
Junior Passos said:
Probably. I believe so, because it's a Retail version.
Click to expand...
Click to collapse
hello the ota that you climbed December gives me error in my reteu with November patch then I do not know if it is compatible with the firmware that you uploaded thanks
regards
Download the stock ROM HERE
and unzip it along with the abd fastboot archives (inside it's folder)
put your phone on fastboot mode: volume down + power
open abd + fastboot HERE (shift + right mouse button - open command window)
it will open a command window
write: fastboot devices and hit enter - make sure it shows numbers like serial numbers
past this comand:
Code:
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem lock
fastboot reboot
hit enter and wait, you are done!
PS:
1. doing this fixed "Your device has failed verification and may not work properly" showing on my brand new phone
2. it is just flashing stock room it is not rooting or unlocking boothloder so it will not make you lose your warranty
3. as for me (I'm from brazil) its working perfectly
CREDITS FOR THE ROOM: stockrom.net
Force close
I'm facing force closes from apps like file manager Moto apps and more. Did you face these?
Are you sure this is the stock rom for the XT1710-07? The stock rom you posted is exactly the same as
https://mirrors.lolinet.com/firmware/moto/albus/official/RETAIL/
But good to know that it worked for you. Who knows, maybe now there is only one RETAIL stock rom which works for all variants (except VZW and CN)?
@lexie90
1- Room = quarto, sala. The correct name is "ROM"
2- Original credits to ROM is for Adriana Pignata (Google+) and mirrors.lollinet.
This site stckrom.net simply copying.
Since the origin of this code is unknown and the OP is not a developer, members are advised to exercise due caution - in other words, you take the risk entirely.
I credited the site I got It from, How could I know where they got It from?
Junior Passos said:
@lexie90
1- Room = quarto, sala. The correct name is "ROM"
2- Original credits to ROM is for Adriana Pignata (Google+) and mirrors.lollinet.
This site stckrom.net simply copying.
Click to expand...
Click to collapse
Thanks for the Very important correction
LenAsh said:
Since the origin of this code is unknown and the OP is not a developer, members are advised to exercise due caution - in other words, you take the risk entirely.
Click to expand...
Click to collapse
Yep this note was in the post until the ADM edited and apparently took It off
If my Moto don't have unlock bootloader, I can flash it?
lexie90 said:
I credited the site I got It from, How could I know where they got It from?
Click to expand...
Click to collapse
That's exactly the point I made. Other members NEED to understand the risks this brings.
LenAsh said:
That's exactly the point I made. Other members NEED to understand the risks this brings.
Click to expand...
Click to collapse
Yep I agree! I dont understand why the ADM took the advertising out
this rom stock work with other variants of XT1710, in Mexico we have XT 1710-06, please you can tell me?
XT1710-06 Variant
Does anyone has the XT1710-06 variant? it's the Latin American Retail version.
I'm still on APRIL 1st Security Patch, and I'm really starting to wonder if this version is ever going to upgrade to 8.0 or whatever.
Is there a way to go back to full stock rom in case I mess up in the process of installing a different official rom?
Thanks!
Not exactly the best at all with phone development, and this may be the dumbest question ever, but can I flash this onto a Samsung phone somehow? I am just wondering. Like I said, sorry if it is a dumb question I am not good at all with phone stuff haha
@Junior Passos Were you able to install OTAs after installing this stock retail rom?
gngshpor said:
Not exactly the best at all with phone development, and this may be the dumbest question ever, but can I flash this onto a Samsung phone somehow? I am just wondering. Like I said, sorry if it is a dumb question I am not good at all with phone stuff haha
Click to expand...
Click to collapse
You can't put it on a samsung. You needa put that Samsung's roms on that samsung.
Hi to all. Have a question. I bought Moto z2 play xt 1710-11 with ZUI!!! where can I get working global stock rom?
Yevgeniy1985 said:
Hi to all. Have a question. I bought Moto z2 play xt 1710-11 with ZUI!!! where can I get working global stock rom?
Click to expand...
Click to collapse
Hi, nowhere.
I used 2 stock ROMs to get a clean Nougat with working modems.
KirMit said:
Hi, nowhere.
I used 2 stock ROMs to get a clean Nougat with working modems.
Click to expand...
Click to collapse
Maybe custom? Something with working gapps and Moto mods
Yevgeniy1985 said:
Maybe custom? Something with working gapps and Moto mods
Click to expand...
Click to collapse
Year, just replace with correct modem images.
KirMit said:
Year, just replace with correct modem images.
Click to expand...
Click to collapse
If it possible, could you give me a link to read materials how to do that?
Hi, it's there any chance to re-lock bootloader on Moto Z with 7.1.1 and last security patch?
yes, there is a change.... only if you have a full image from 7.1.1 last security patch.... what patch do you have?
x-geo said:
yes, there is a change.... only if you have a full image from 7.1.1 last security patch.... what patch do you have?
Click to expand...
Click to collapse
NPLS26.118-20-1 (August 2017) XT1650-03 reteu with unlocked second SIM
x-geo said:
yes, there is a change.... only if you have a full image from 7.1.1 last security patch.... what patch do you have?
Click to expand...
Click to collapse
NPLS26.118-20-5 (1. september security patch)
Do you mean full image via TWRP recovery?I bought it already unlocked - I need re-lock bootloader due to use Android Pay (and warranty ofc) in my country.
apocalypse_bg said:
NPLS26.118-20-1 (August 2017) XT1650-03 reteu with unlocked second SIM
Click to expand...
Click to collapse
with this firmware, you can relock bootloader
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
with this commands via fastboot or mfastboot (reeplace fastboot with mfastboot)
Code:
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash system system.img_sparsechunk.8
mfastboot flash system system.img_sparsechunk.9
mfastboot flash system system.img_sparsechunk.10
mfastboot flash system system.img_sparsechunk.11
mfastboot flash system system.img_sparsechunk.12
mfastboot flash system system.img_sparsechunk.13
mfastboot flash system system.img_sparsechunk.14
mfastboot flash system system.img_sparsechunk.15
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
fastboot reboot
shiffty_dnb said:
NPLS26.118-20-5 (1. september security patch)
Do you mean full image via TWRP recovery?I bought it already unlocked - I need re-lock bootloader due to use Android Pay (and warranty ofc) in my country.
Click to expand...
Click to collapse
No, only via fastboot, this procedure remove twrp and leave the phone totally stock with lock bootloader
Ok, it's same codes as for apocalypse_bg right? When i extract XT1650-03_GRIFFIN_RETUS_7.0_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml they are in the folder only system.img 1-12, so that will not be a problem?
shiffty_dnb said:
Ok, it's same codes as for apocalypse_bg right? When i extract XT1650-03_GRIFFIN_RETUS_7.0_NPLS25.86-30-12_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml they are in the folder only system.img 1-12, so that will not be a problem?
Click to expand...
Click to collapse
no, only depends of the ammount of system.img_sparsechunk in the file
Thank you for the info! Any mirror on the image, I'm getting an access denied
For me its still not possible to lock the bootloader.
While flashing it this message appears while flashing: "Image signed with key bad key".
On boot the message of the open bootloader appears but as key there is only "n/a" shown, can this be the problem?
apocalypse_bg said:
Thank you for the info! Any mirror on the image, I'm getting an access denied
Click to expand...
Click to collapse
yes,
https://androidfilehost.com/?fid=745425885120763874
Dëmön said:
For me its still not possible to lock the bootloader.
While flashing it this message appears while flashing: "Image signed with key bad key".
On boot the message of the open bootloader appears but as key there is only "n/a" shown, can this be the problem?
Click to expand...
Click to collapse
hello.... what security patch do you have?
x-geo said:
hello.... what security patch do you have?
Click to expand...
Click to collapse
Its 1st september.
Dëmön said:
Its 1st september.
Click to expand...
Click to collapse
that's the problem...... we have to wait to the september full image to be available...
x-geo said:
that's the problem...... we have to wait to the september full image to be available...
Click to expand...
Click to collapse
After I have answered I tried something out and I think I had August yesterday.
Because the error with the bad key doesnt appear anymore while flashing - now it says its security downgrade.
Im not sure if I had the newest update installed.
Dëmön said:
After I have answered I tried something out and I think I had August yesterday.
Because the error with the bad key doesnt appear anymore while flashing - now it says its security downgrade.
Im not sure if I had the newest update installed.
Click to expand...
Click to collapse
can you post a "about phone" screenshot?
x-geo said:
can you post a "about phone" screenshot?
Click to expand...
Click to collapse
Sure.
Now I have the newest update installed, thats for sure.
I beginning to think that I maybe did something wrong long time ago that I have now this problems.
The good thing is it is my 2nd phone and I am using it only at the moment to test things out.
Dëmön said:
Sure.
Now I have the newest update installed, thats for sure.
I beginning to think that I maybe did something wrong long time ago that I have now this problems.
The good thing is it is my 2nd phone and I am using it only at the moment to test things out.
Click to expand...
Click to collapse
don't worry, when the update comes out, i'll post it here... in the morning mine get the update... only have to wait the full image
Dëmön said:
Sure.
Now I have the newest update installed, thats for sure.
I beginning to think that I maybe did something wrong long time ago that I have now this problems.
The good thing is it is my 2nd phone and I am using it only at the moment to test things out.
Click to expand...
Click to collapse
ok mate, here is the update... go on and lock that bootloader... jejejeje... and post the result
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
x-geo said:
ok mate, here is the update... go on and lock that bootloader... jejejeje... and post the result
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
Thanks but the link isnt working for me.
Dëmön said:
Thanks but the link isnt working for me.
Click to expand...
Click to collapse
try again... doesnt work yesterday, but today it was
x-geo said:
try again... doesnt work yesterday, but today it was
Click to expand...
Click to collapse
Managed to relock bootloader. Thank you so much for sharing.
DISCLAIMER
I am not to be held responsible for any of the damage that occurs to your device during this process. You are yourself responsible for any damage done (if) to your device during this process.
REQUIREMENTS
Make sure your device is charged above 80%.
We recommend creating a backup of all your important files before beginning with this process.
HOW TO INSTALL STOCK ROM IN MOTO G6 Plus
Download Moto G6 plus Stock Firmware from below (in download section).
Install Motorola Driver and ADB Fastboot Driver on your PC.
Now extract stock firmware in ADB Fastboot folder.
Now, turn off your device and boot into bootloader by pressing volume down button +power button simultaneously.
Now, connect your device to your PC via a USB Cable.
Open a command prompt window and type the following commands:
Moto G6Plus: AFH
EVERT_OPW27.113-45_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
NEW FIRMWARE - EVERT_OPW27.113-45-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
mirror link mega
https://mega.nz/#!boNAQChB!a6HZUtjWqWYmvA1C0aUZ4g60b8fj3aQbllIVXqfWxik
adb fastboot
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
Click to expand...
Click to collapse
lohanbarth said:
Moto G6: AFH
ALI_OPS27.82-19-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Moto G6Plus: AFH
EVERT_OPW27.113-27_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
tread in progress
Click to expand...
Click to collapse
Firmware Complete April Patch
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Sent from my Moto G5 Plus using XDA Labs
Firmware Complete April Patch Evert - AFH
EVERT_OPW27.113-45_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
lohanbarth said:
Firmware Complete April Patch Evert - AFH
EVERT_OPW27.113-45_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
Thanks! Unfortunately AFH won't let me download the whole file. It keeps stopping every time at the end of the download
smitharro said:
Thanks! Unfortunately AFH won't let me download the whole file. It keeps stopping every time at the end of the download
Click to expand...
Click to collapse
I just tried and I'm not problem, retried and said me it works, otherwise I upload it on mega
https://mega.nz/#!boNAQChB!a6HZUtjWqWYmvA1C0aUZ4g60b8fj3aQbllIVXqfWxik
lohanbarth said:
I just tried and I'm not problem, retried and said me it works, otherwise I upload it on mega
https://mega.nz/#!boNAQChB!a6HZUtjWqWYmvA1C0aUZ4g60b8fj3aQbllIVXqfWxik
Click to expand...
Click to collapse
Thanks! Mega did the trick. Always good to have the original stock rom as a backup!
One more question @lohanbarth: the last rom has the same build number as the one that my Moto G6 Plus was delivered with. But are you sure it's suitable for the standard G6 also? Because they are completely different devices?
smitharro said:
Thanks! Mega did the trick. Always good to have the original stock rom as a backup!
One more question @lohanbarth: the last rom has the same build number as the one that my Moto G6 Plus was delivered with. But are you sure it's suitable for the standard G6 also? Because they are completely different devices?
Click to expand...
Click to collapse
Actually, I think I will create another thread for the standard G6 motorola, so no one is wrong.
Hello!!!
I have a dummy question: I buyed my Moto G6 Plus from a brazilian operator (Vivo) and the firmware is "cutomized" (aka a lot of vivo bloatware)... Can I install this stock firmware without unlock the bootloader? Only follow the instructions?
Thank you!!!
Regasds,
Jansen Arruda
z1984z said:
Hello!!!
I have a dummy question: I buyed my Moto G6 Plus from a brazilian operator (Vivo) and the firmware is "cutomized" (aka a lot of vivo bloatware)... Can I install this stock firmware without unlock the bootloader? Only follow the instructions?
Thank you!!!
Regasds,
Jansen Arruda
Click to expand...
Click to collapse
No, you can't. You need to unlock the bootloader if you want modify your system
jekyll86 said:
No, you can't. You need to unlock the bootloader if you want modify your system
Click to expand...
Click to collapse
Thank you Jekyll!!!
Best regards!
REQUIREMENTS
Make sure your device is charged above 80%.
HOW TO INSTALL STOCK ROM IN MOTO G6 Plus
Download Moto G6 plus Stock Firmware from below (in download section).
Install Motorola Driver and ADB Fastboot Driver on your PC.
Now extract stock firmware in ADB Fastboot folder.
Now, turn off your device and boot into bootloader by pressing volume down button +power button simultaneously.
Now, connect your device to your PC via a USB Cable.
Open a command prompt window and type the following commands:
Click to expand...
Click to collapse
I got this when running the command :
c:\mfastboot-v2>fastboot erase DDR
erasing 'DDR'... INFOInvalid partition name DDR
FAILED (remote failure)
finished. total time: 0.001s
What is DDR and is this important?
Thanks in advance!
TJ
Does anyone know if this stock ROM is safe to flash on top on an EVERT_LATAMDSSD with build number OPW27.113-25?
AndroidDevices said:
I got this when running the command :
c:\mfastboot-v2>fastboot erase DDR
erasing 'DDR'... INFOInvalid partition name DDR
FAILED (remote failure)
finished. total time: 0.001s
What is DDR and is this important?
Thanks in advance!
TJ
Click to expand...
Click to collapse
Try using a different fastboot file. You can get adb universal installer and you can run fastboot from the cmd prompt regardless of what directory you are in. Not sure the importance of this command.
jorge_moran_jams said:
Does anyone know if this stock ROM is safe to flash on top on an EVERT_LATAMDSSD with build number OPW27.113-25?
Click to expand...
Click to collapse
What's the model number? Should be XT-xxxx
Sent from my moto g(6) plus using Tapatalk
Xplorer4x4 said:
Try using a different fastboot file. You can get adb universal installer and you can run fastboot from the cmd prompt regardless of what directory you are in. Not sure the importance of this command. What's the model number? Should be XT-xxxx
Sent from my moto g(6) plus using Tapatalk
Click to expand...
Click to collapse
Hey, where did you go on Telegram?
AndroidDevices said:
Hey, where did you go on Telegram?
Click to expand...
Click to collapse
No where! Just been a really hectic few days plus not to much going on until we get sources from Moto. Looked like you did do some testing but the missing functionality(fingerprint, GPS, etc) is to many broken functions for dd status for now.
Sent from my moto g(6) plus using Tapatalk
Xplorer4x4 said:
No where! Just been a really hectic few days plus not to much going on until we get sources from Moto. Looked like you did do some testing but the missing functionality(fingerprint, GPS, etc) is to many broken functions for dd status for now.
Sent from my moto g(6) plus using Tapatalk
Click to expand...
Click to collapse
I booted Phh-Project Treble last night...
Xplorer4x4 said:
What's the model number? Should be XT-xxxx
Click to expand...
Click to collapse
My model number is: XT1926-7, the one available on Amazon.
Xplorer4x4 said:
Try using a different fastboot file. You can get adb universal installer and you can run fastboot from the cmd prompt regardless of what directory you are in. Not sure the importance of this command. What's the model number? Should be XT-xxxx
Sent from my moto g(6) plus using Tapatalk
Click to expand...
Click to collapse
I attempt adb and fastboot, mfastboot, and platform-tools and they all give me the same error that i posted....
AndroidDevices said:
I attempt adb and fastboot, mfastboot, and platform-tools and they all give me the same error that i posted....
Click to expand...
Click to collapse
We're they from the same download? If so the zip might have got corrupt. I am also wondering if this could be related to something you flashed that may have altered something possibly in the partitions. Hard to say for sure as I have no experience with a/b slot devices. You might try the telegram channel.
Sent from my moto g(6) plus using Tapatalk
Hello everyone, where I can download the factory images for this model, and how can I know which one I have to download, I'm from Mexico and my company is TELCEL, thanks in advance
Your bootloader must be unlocked.
You can't lock the bootloader, to do this you will need a signed firmware from Motorola (and no one found yet). Instead you can use Magisk to hide the unlocked bootloader, bypass SafetyNet and be able to use Google Pay, for example.
You will not get OTA updates from Motorola even if you somehow lock the bootloader because your phone is registered forever to the "retcn" software update channel, instead of "retail" or "retbr".
Recommended: set your Platform Tools (adb and fastboot) system wide using this guide
https://forum.xda-developers.com/android/software/guide-how-to-set-fastboot-adb-to-wide-t3591240
Tested for updating from Oreo stock without wipe.
Steps for clean flashing or update
- Place the suitable script attached on the extracted ROM folder and flash (these scripts are only for XT1710-08 variant to prevent lost modem signal)
- After all the commands succeeded, wait for a full reboot (because of encryption)
- Flash TWRP
- Flash Magisk normally through TWRP
- Be happy
Firmware (you can use this on other XT1710 variants)
Version: PPS29.133-30 (Android 9.0 Pie)
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Other versions:
https://mirrors.lolinet.com/firmware/moto/albus/official/RETAIL/
TWRP
https://forum.xda-developers.com/z2-play/development/-t3715660
Magisk
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Motorola drivers https://motorola-global-en-aus.custhelp.com/app/answers/prod_detail/a_id/86934/p/154,153
Google SDK Platform Tools https://developer.android.com/studio/releases/platform-tools
Commands for flashing and wipe
PS: the difference from the official `flashfile.xml` commands is that it doesn't contains `fastboot erase modemst1` and `fastboot erase modemst2`
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Commands for flashing without wipe (update)
PS: the only difference from the previous one is that it doesn't contains `fastboot erase userdata`
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase cache
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Thanks to
@eqbirvin
@Junior Passos
@HTCDevil
Hello. If I use your script is unzipped the rom with update to August 2018 is the same? They are currently on custom rom Firehound! I would like to go back to the Motorola Blur retail. Do I have to give all the commands from fastboot?
cuciu70 said:
Hello. If I use your script is unzipped the rom with update to August 2018 is the same? They are currently on custom rom Firehound! I would like to go back to the Motorola Blur retail. Do I have to give all the commands from fastboot?
Click to expand...
Click to collapse
Yes! To go back to Motorola stock ROM you must follow this tutorial to make a clean flash, using the flash-wipe script.
my post was wrong, Moderators please delete my post.
Did'nt know i can't delete my own post.
felipecassiors said:
Yes! To go back to Motorola stock ROM you must follow this tutorial to make a clean flash, using the flash-wipe script.
Click to expand...
Click to collapse
the password does not work.
I tried to open the file with 7zip and zip extractor pro. I enter the password!
wrong password.
cuciu70 said:
the password does not work.
I tried to open the file with 7zip and zip extractor pro. I enter the password!
wrong password.
Click to expand...
Click to collapse
Firmware:
https://drive.google.com/open?id=1rcgUvLG5c7l9jH8AzuTg3WPJnORQ6VlY
The password is
Code:
MotorolaFirmwaresLB
I use WinRAR, but 7-Zip should work. Try again please, here is working.
Would it be easy to update the system with the latest patch? I have magisk installed with system from April patch. If so what how would be the procedure?
Followed all the steps and got it working. Thanks so much, the original software on this version of the phone is terrible!
One thing, like a few others, my fingerprint sensor isn't working. Is it as simple as a wipe after install?
pjcons said:
Followed all the steps and got it working. Thanks so much, the original software on this version of the phone is terrible!
One thing, like a few others, my fingerprint sensor isn't working. Is it as simple as a wipe after install?
Click to expand...
Click to collapse
Take a look at this post friend:
https://forum.xda-developers.com/z2...reo-retail-via-fastboot-t3786153/post76486376
Try to flash again but evading this 4 commands.
felipecassiors said:
Take a look at this post friend:
https://forum.xda-developers.com/z2...reo-retail-via-fastboot-t3786153/post76486376
Try to flash again but evading this 4 commands.
Click to expand...
Click to collapse
Yes I took those out when flashed and still no fp sensor. Thanks for sending on though. I read everything b4 flash but still no fp sensor.
But I didn't wipe 1st so might flash again and wipe 1st?
Everything else working 100% :good:
pjcons said:
Yes I took those out when flashed and still no fp sensor. Thanks for sending on though. I read everything b4 flash but still no fp sensor.
But I didn't wipe 1st so might flash again and wipe 1st?
Everything else working 100% :good:
Click to expand...
Click to collapse
If you can, please try wiping in first. If still doesn't work, the procedure to solve this is:
- Flash the original ROM (that ugly ZUI one) to get it working again
- Flash the ROM on this thread, wiping, evading that 4 commands
I can help you to find the ZUI ROM if you need.
felipecassiors said:
If you can, please try wiping in first. If still doesn't work, the procedure to solve this is:
- Flash the original ROM (that ugly ZUI one) to get it working again
- Flash the ROM on this thread, wiping, evading that 4 commands
I can help you to find the ZUI ROM if you need.
Click to expand...
Click to collapse
Cheers mate. If u can send me a link to the very ugly Zui rom just in case would be great.
pjcons said:
Cheers mate. If u can send me a link to the very ugly Zui rom just in case would be great.
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=1322778262903986742
Just make sure your device is XT1710-08
Tested on a XT1710-06 full wipe and it works great, because i wanted to do and update and i goot bootloop.
Just in case someone find this, im from México, I flashed this fastboot rom and installed Magisk to get root, used the Canary build to make it work with my fav games that are Fate go and Pokemon go (spoof) and it works like a charm, thanks.
felipecassiors said:
https://androidfilehost.com/?fid=1322778262903986742
Just make sure your device is XT1710-08
Click to expand...
Click to collapse
Yep, it's an XT1710-08 for sure! Thanks again...
pjcons said:
Yep, it's an XT1710-08 for sure! Thanks again...
Click to expand...
Click to collapse
Friend, use the tutorial of this thread, but instead of that script, use this attached to flash the ZUI stock ROM.
8bitcode said:
Tested on a XT1710-06 full wipe and it works great, because i wanted to do and update and i goot bootloop.
Just in case someone find this, im from México, I flashed this fastboot rom and installed Magisk to get root, used the Canary build to make it work with my fav games that are Fate go and Pokemon go (spoof) and it works like a charm, thanks.
Click to expand...
Click to collapse
Friend, for models other than XT1710-08 (outside China), you can use this script attached. It is more recommended.
Thank you for the feedback!
felipecassiors said:
Friend, for models other than XT1710-08 (outside China), you can use this script attached. It is more recommended.
Thank you for the feedback!
Click to expand...
Click to collapse
Hey I got back to ZUI - the Chinese ROM came up. Fingerprint working. So rebooted into BL and flashed the firmware as per OP. Again, no FP sensor.
I'm gonna try again and wipe after install ZUI, BEFORE flash and wipe Oreo.
[2nd try no better??]
It flashes ok but FP sensor just won't work. Everything else working. When you say "Flash the ROM on this thread, wiping, evading that 4 commands" I use the flash and wipe script and remove the 4 commands (the erase modem seem to have been removed already from the script). Any ideas, I'm so close! Have flashed back and forth a few times tonight. It's fun though! Cheers!
pjcons said:
Hey I got back to ZUI - the Chinese ROM came up. Fingerprint working. So rebooted into BL and flashed the firmware as per OP. Again, no FP sensor.
I'm gonna try again and wipe after install ZUI, BEFORE flash and wipe Oreo.
[2nd try no better??]
It flashes ok but FP sensor just won't work. Everything else working. When you say "Flash the ROM on this thread, wiping, evading that 4 commands" I use the flash and wipe script and remove the 4 commands (the erase modem seem to have been removed already from the script). Any ideas, I'm so close! Have flashed back and forth a few times tonight. It's fun though! Cheers!
Click to expand...
Click to collapse
Mine XT1710-08 fingerprint sensor works without removing the 4 commands, I just remove the 2 erase modem (already removed in the flash scripts). Anyway, try to install the ROM of this thread (https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153) and see if it work for you. Please post here if you have news about it.
Rooting
I did all the steps and completely reinstalled android 8.0 on my moto z2 play, I then got twrp and tried flashing magisk 17.1, I got stuck in a bootloop but managed to flash the whole thing again, which solved the problem. To make sure this doesn't happen again, could you please state the steps for rooting. I cant remember if it was because I did not input the code into the terminal. When I input the code am I supposed to get a response or message, because it just stays bank?
Thank you