Hi Guys
I have an LG G Stylo (ms631) that i bricked trying to downgrade from android 6.0 back to 5.1. Last thing i did was use LG Flash tool on my PC to flash the 5.1 kdz, not sure what i did wrong. The device now will not boot at all. Ive rooted, flashed roms, customized the stock rom, etc many times before without any problems, just my first time downgrading.
**NOTA: When connecting it to my pc, only this appears in the Device Manager "Qualcomm HS-USB QDLoader 9008"
Any solution?
Related
I recently rooted & flashed custom rom (CM 9) on my Optimus L3.Then i wanted to flash it back to stock after i got bored of the ICS rom, and followed a KDZ Updater guide, and now my device is bricked. If i try to turn it on, it will boot loop forever.The KDZ proccess was perfect, i had no errors (atleast i think i dont).I really need help to save my phone.
Used Windows7, had LG PC Suite IV Installed, i disabled LG Modem, I was in Emergency mode, .kdz used *V10H_00*.
no1thedark said:
I recently rooted & flashed custom rom (CM 9) on my Optimus L3.Then i wanted to flash it back to stock after i got bored of the ICS rom, and followed a KDZ Updater guide, and now my device is bricked. If i try to turn it on, it will boot loop forever.The KDZ proccess was perfect, i had no errors (atleast i think i dont).I really need help to save my phone.
Used Windows7, had LG PC Suite IV Installed, i disabled LG Modem, I was in Emergency mode, .kdz used *V10H_00*.
Click to expand...
Click to collapse
I also tried LGMDP, but it doesn't recognize my phone, since i somehow can't manage to install the drivers correctly since it can't boot..
Hello all.
I have serious problem with my LG g2 mini d620r.i think I hard bricked it by mistake.
I have try to flash one stock rom about 20 times,with windows 8.1 X64bit also with win7 x64bit but no positive result.
I used LG B2C with LG r&d tool that I read here on XDA about LG g2 flashing method (offline and online).
I want some help here what can I do
the device is shown on PC only as HQUSB QUALLCOM 9008.
no download mode nothing at all.
Same happened to me but with an HTC One S, I tried everything I could find on the net but in the end I had to send it in for repair
I was trying to downgrade my Tribute 2 to stock firmware by following this guide:
"LG Tribute 2 LS665 Unbrick with Stock ROM"
(you can Google it, sorry I can't post links yet)
The LG flash tool "FAILED" at 99%, and now the phone is in a really bad state. I can tell that it powers on, because it shows up in Windows 10 Device Manager as a Qualcomm 9008 Gobi Modem. However, nothing appears on the screen even if I try to boot into recovery mode. So, we can assume that whatever is on the eMMC is completely hosed.
Is there any way to resurrect this phone?
Hi,
I tried to update my lg v10 h901 tmobile version with LG G bridg after updating 100% my phone is not even showing anything.
If I connect with computer it only detect it as (Qualcomm HS-USB QDLoader 9008 ) and nothing else
can you please please help me ??
h901 with f600l brick
zeeshan18 said:
Hi,
I tried to update my lg v10 h901 tmobile version with LG G bridg after updating 100% my phone is not even showing anything.
If I connect with computer it only detect it as (Qualcomm HS-USB QDLoader 9008 ) and nothing else
can you please please help me ??
Click to expand...
Click to collapse
Yes help please ...
@zeeshan18 Follow this guide, make sure you find an image of the firmware that your phone was on.
@serdarkx Follow this guide, also find the corresponding firmware image.
Sorry my english is not good ;/
Sooo...
Yesterday i tried upgrade my lg v10 h901 android 5.1.1
I used the file H90120e_00_0316 and uploaded by LGUP. The program load file in 100% but they stopped on ===rebooting 150sec===
when the instalation was complete telefon not rebooting ;/
USB port detected it as Qualcomm hs-usb 9008
I tried this method
https://forum.xda-developers.com/tmobile-lg-v10/development/debrick-phone-h901-qualcomm-9008-t3440359-------------> but i used kingston microSD card..... it's a mistake?
I will be very grateful for help