Hey, guys.
I come to bring you the file logo.bin for those who want to unlock the bootloader of your bike G6/G6 Plus and do not want to stick with that message from "unlocked bootloader ".
Requeriments:
Unlocked Bootloader
ADB Fastboot files
Istructions for flash the file:
After you unlock the bootloader, open the ADB fastboot folder and run the following command via CMD:
fastboot flash logo logo.bin
And that's it. Your bootlogo back to normal and the unlocked bootloader message is gone.
Created by me and tested on my moto G6 Plus XT1926-7.
http://www.mediafire.com/file/883eazfoje0e252/Bootlogo_Moto_G6.zip
@luiz_neto since you've unlocked your bootloader, want to test out TWRP?
https://build.lolinet.com/file/twrp-3.2.1-0-evert.img
Just do: fastboot boot twrp-3.2.1-0-evert.img
ahmed.al said:
@luiz_neto since you've unlocked your bootloader, want to test out TWRP?
https://build.lolinet.com/file/twrp-3.2.1-0-evert.img
Just do: fastboot boot twrp-3.2.1-0-evert.img
Click to expand...
Click to collapse
Thanks Man. You're Awesome!!!
Does it fully work? Send screenshots @luiz_neto
ahmed.al said:
@luiz_neto since you've unlocked your bootloader, want to test out TWRP?
https://build.lolinet.com/file/twrp-3.2.1-0-evert.img
Just do: fastboot boot twrp-3.2.1-0-evert.img
Click to expand...
Click to collapse
Didn't work, it's still in the original recovery. Still appearing the screenshot "no commands".
ahmed.al said:
@luiz_neto since you've unlocked your bootloader, want to test out TWRP?
https://build.lolinet.com/file/twrp-3.2.1-0-evert.img
Just do: fastboot boot twrp-3.2.1-0-evert.img
Click to expand...
Click to collapse
Didn't work.
Please send me the original stock recovery file so i can make a porta for the device.
luiz_neto said:
Didn't work, it's still in the original recovery. Still appearing the screenshot "no commands".
Click to expand...
Click to collapse
Can you tell me which exact error you get when you run "fastboot boot twrp-3.2.1-0-evert.img"? This command is not supposed to flash the recovery btw, it's just supposed to make you boot into it.
ahmed.al said:
@luiz_neto since you've unlocked your bootloader, want to test out TWRP?
https://build.lolinet.com/file/twrp-3.2.1-0-evert.img
Just do: fastboot boot twrp-3.2.1-0-evert.img
Click to expand...
Click to collapse
It worked with your exact command. How do I leave permanent using the command "fastboot flash twrp-3.2.1-0-evert.img"?
luiz_neto said:
It worked with your exact command. How do I leave permanent using the command "fastboot flash twrp-3.2.1-0-evert.img"?
Click to expand...
Click to collapse
Which error do you get when doing fastboot boot?
luiz_neto said:
It worked with your exact command. How do I leave permanent using the command "fastboot flash twrp-3.2.1-0-evert.img"?
Click to expand...
Click to collapse
When I enter the recovery that you sent, in my device does not appear the usual folders like: "android " or "Download ", but several folders with crazy names like "AZ9WLLrc4T1IEVw2xQ + ofA " or "BoGzY997Zjul, TowV0NBwA " and in Windows the device is listed on USB devices such as "Moto X4"
ahmed.al said:
Which error do you get when doing fastboot flash instead of boot?
Click to expand...
Click to collapse
Dude, my device is dead!!! I'm desperate, nothing happens when I hold the power button anymore. Probably corrupted the bootloader here, because nothing, NOTHING EVEN happens.
:crying::crying::crying::crying::crying::crying::crying:
luiz_neto said:
Dude, my device is dead!!! I'm desperate, nothing happens when I hold the power button anymore. Probably corrupted the bootloader here, because nothing, NOTHING EVEN happens.
:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
You need to find a blankflash. The device is A/B partitioned, you switched to the B slot that's why it got bricked.
luiz_neto said:
Dude, my device is dead!!! I'm desperate, nothing happens when I hold the power button anymore. Probably corrupted the bootloader here, because nothing, NOTHING EVEN happens.
:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Good luck...Hope you get it unbricked
Did it happen after 'fastboot flash recovery twrp*.img'?
luiz_neto said:
Dude, my device is dead!!! I'm desperate, nothing happens when I hold the power button anymore. Probably corrupted the bootloader here, because nothing, NOTHING EVEN happens.
:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
hello sorry if you bricked your phone
we forgot to tell you not to switch slots
but here is blankflash thanks to vache http://cloud.vache-android.com/Moto/evert/blankflash/blankflash.zip
don't worry no need to panic blankflash can fix it
tell me if you had any errors while using this
BTW thanks for testing twrp i'll fix bugs soon and release installer zip
erfanoabdi said:
hello sorry if you bricked your phone
we forgot to tell you not to switch slots
but here is blankflash thanks to vache http://cloud.vache-android.com/Moto/evert/blankflash/blankflash.zip
don't worry no need to panic blankflash can fix it
tell me if you had any errors while using this
BTW thanks for testing twrp i'll fix bugs soon and release installer zip
Click to expand...
Click to collapse
Man, thank you so much, really. Thanks to you for the help and thanks to Vache for the Blankflash file.
erfanoabdi said:
hello sorry if you bricked your phone
we forgot to tell you not to switch slots
but here is blankflash thanks to vache http://cloud.vache-android.com/Moto/evert/blankflash/blankflash.zip
don't worry no need to panic blankflash can fix it
tell me if you had any errors while using this
BTW thanks for testing twrp i'll fix bugs soon and release installer zip
Click to expand...
Click to collapse
Dude, you want a tip? For now, in TWRP Remove the options to select Partitions A and B, or make a tutorial making it clear that this exchange will brick the device. From now on, thank you very much for the support.
luiz_neto said:
Dude, you want a tip? For now, in TWRP Remove the options to select Partitions A and B, or make a tutorial making it clear that this exchange will brick the device. From now on, thank you very much for the support.
Click to expand...
Click to collapse
no thanks, i'll take care of it, so happy you fixed your phone
Hello,
I tried the previously mentioned TWRP on my moto g6, having previously unlocked the bootloader using the motorola site.
I did "fastboot boot twrp-3.2.1-0-evert.img".
It returned:
"downloading 'boot.img'...
OKAY [ 0.567s]
booting...
OKAY [ 0.938s]"
Then on the phone I had the following page:
On imgur -> XciH6ds (I don't have enough posts to make it a link) imgur.com/XciH6ds
I would be willing to try other things to help with making this work I would prefer not to have a bricked phone but I got this phone to play around with, so it's not critically important
Thanks
There is still no stable twrp for the Motorola g 6 ??
Enviado desde mi moto g(6) mediante Tapatalk
Well the most up to date things I could find were in this thread honestly
Related
Hello,
1.Ive rooted my phone emui 4.1 with kingroot
2. I've flashed Official twrp 3.0.2
3. After booting in twrp I tried to clear cache but it unable to clear cache.
4. Then I've force rebooted to recovery then all partitions got unmounted (shocked)
5. So I flashed mm kang ROM then phone bricked so I thought that stock recovery may mount all partitions so I flashed stock recovery (back up)
6. Finally I'm unable to boot in stock recovery and ROM
7. What do u think guys? How to solve this issue ??
Any one faced same problem?
***Main thing is what ever I try to push a file from adb to phone in fastboot mode (ex- recovery,boot.IMG) it says "writing recovery failed:command not allowed". why I'm getting this error ?? I've unlocked bootloader too ***
Thank you!
.
Martin213 said:
Restore backup of stock rom if you able to boot in twrp.Did you try flash with huawei multitool?
Sent from Paris with love ?
Click to expand...
Click to collapse
I tried but partitions are unmounted so its not booting up,struck at Honor logo
How to solve this???
Pranav Kumar said:
How to solve this???
Click to expand...
Click to collapse
if bootloader works: download official image, use fastboot flash commands to flash all parts
otherwise
download official image from huawai, (update.app) copy to sd, boot phone with all 3 buttons pressed. it shold boot into some recovery.
endrancer said:
if bootloader works: download official image, use adb flash commands to flash all parts
otherwise
download official image from huawai, (update.app) copy to sd, boot phone with all 3 buttons pressed. it shold boot into some recovery.
Click to expand...
Click to collapse
I tired pushing recovery image to device but command says "writing recovery,failed (command not allowed)"
And I tried update.app in SD card in a folder dload tried 3button method also, but it is not booting in recovery right how it can take update?
Pranav Kumar said:
I tired pushing recovery image to device but command says "writing recovery,failed (command not allowed)"
And I tried update.app in SD card in a folder dload tried 3button method also, but it is not booting in recovery right how it can take update?
Click to expand...
Click to collapse
are you able to boot into bootloader? is "fastboot devices" command showing anything?
eddor1614 said:
are you able to boot into bootloader? is "fastboot devices" command showing anything?
Click to expand...
Click to collapse
Yes its showing
Pranav Kumar said:
Yes its showing
Click to expand...
Click to collapse
have you extracted BOOT, RECOVERY, SYSTEM and CUSTOM from huawei package?
eddor1614 said:
have you extracted BOOT, RECOVERY, SYSTEM and CUSTOM from huawei package?
Click to expand...
Click to collapse
Yes I tried but when file is being pushed to phone it says failed (command not allowed) repeats
Can you see "phone unlocked" on screen?
Yeah, sounds like locked bootloader.
Gsavas said:
Yeah, sounds like locked bootloader.
Click to expand...
Click to collapse
No bro I've unlocked bootloader
And I can see *phone unlocked" in fastboot mode
Gsavas said:
Yeah, sounds like locked bootloader.
Click to expand...
Click to collapse
have you tried flashing BOOT or SYSTEM partitions?
Pranav Kumar said:
No bro I've unlocked bootloader
And I can see *phone unlocked" in fastboot mode
Click to expand...
Click to collapse
You could try to reinstall drivers then or try a different pc.
Gsavas said:
You could try to reinstall drivers then or try a different pc.
Click to expand...
Click to collapse
Tried and I got same error(failed(command not allowed))
Do you have hisuite? If not try uninstalling drivers then install hisuite and try flashing with fastboot then. By the way does your device get recognised when you type "fastboot devices" command?
that's strange.
have you tried booting into second recovery?
eddor1614 said:
that's strange.
have you tried booting into second recovery?
Click to expand...
Click to collapse
Yes in eRecovery I can see "update recovery" after connecting to wifi it says "failed to get device info"
I ran out of options.
You might want to try all the same, using different UPDATE.APP version, like B180 or B200, using a different cable, different computer, etc.
Then next step will be Huawei support, it might be a memory/hardware problem.
Sorry man.
Hi, I used fastboot to boot TWRP without flashing it (using fastboot boot twrp.img). Foolishly of me when exit TWRP I was asked to disabled Stock Recovery wich I swiped yes. Now my stock recovery is gone. How do I enable it via TWRP again without having to flash it? or what are my options? phone functionlity was not afected, just the stock recovery.
thanks.
imho you either use twrp OR stock recovery. so in my opinion youve done all right.
Download fastboot image.. extract boot.img from it. Boot in TWRP using fastboot .. then install->install image->boot.img(file you extracted)->flash->choose recovery, not boot when where to flash->done.
If it doesn't work then flash the whole fastboot image with mitool.
h0LLe said:
imho you either use twrp OR stock recovery. so in my opinion youve done all right.
Click to expand...
Click to collapse
dragneelfps said:
Download fastboot image.. extract boot.img from it. Boot in TWRP using fastboot .. then install->install image->boot.img(file you extracted)->flash->choose recovery, not boot when where to flash->done.
If it doesn't work then flash the whole fastboot image with mitool.
Click to expand...
Click to collapse
I ended up flashing the whole image beacuse it bricked when using the command "fastboot oem lock".
any idea why it bricked? i did flash a stock recovery before in order to lock it again.
After rooting it im interested in locking the bootloader again. Maybe I skipped a procedure in order to lock the bootloader again??
Right now im rooted, phone working, stock recovery (since I flashed a fastboot image with SP tools) and unlocked bootloader but I want to lock it without bricking it again.
thanks.
pach33 said:
I ended up flashing the whole image beacuse it bricked when using the command "fastboot oem lock".
any idea why it bricked? i did flash a stock recovery before in order to lock it again.
After rooting it im interested in locking the bootloader again. Maybe I skipped a procedure in order to lock the bootloader again??
Right now im rooted, phone working, stock recovery (since I flashed a fastboot image with SP tools) and unlocked bootloader but I want to lock it without bricking it again. (i lock bootloader for my friend which has redmi 3s)
thanks.
Click to expand...
Click to collapse
To lock bootloader again you must flash stock image via fastboot with "lock bootloader" bat file (it is in stock image flashtool zip). But why U need to lock bootloader? i dont see sense to do it.
dromaczek said:
To lock bootloader again you must flash stock image via fastboot with "lock bootloader" bat file (it is in stock image flashtool zip). But why U need to lock bootloader? i dont see sense to do it.
Click to expand...
Click to collapse
Hi, thanks for the answer, I want to lock it because some features got disabled when unlocking the bootloader, like xiaomis "Find mi Device". I also read that having the bootloader unlocked may compromise your data security.
pach33 said:
Hi, thanks for the answer, I want to lock it because some features got disabled when unlocking the bootloader, like xiaomis "Find mi Device". I also read that having the bootloader unlocked may compromise your data security.
Click to expand...
Click to collapse
:laugh::laugh::laugh::laugh: funniest thing i read on the internet today
chandradeepdey01 said:
:laugh::laugh::laugh::laugh: funniest thing i read on the internet today
Click to expand...
Click to collapse
He write only true! He could "read that having the bootloader unlocked may compromise your data security" :laugh::laugh::laugh::laugh::laugh:
chandradeepdey01 said:
:laugh::laugh::laugh::laugh: funniest thing i read on the internet today
Click to expand...
Click to collapse
dromaczek said:
He write only true! He could "read that having the bootloader unlocked may compromise your data security" :laugh::laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
Glad I made you guys laugh. :good: Next time I will better use the noob friendly Q&A.
pach33 said:
Glad I made you guys laugh. :good: Next time I will better use the noob friendly Q&A.
Click to expand...
Click to collapse
Woah, didn't mean to offend you bro. It was sarcasm.
It is replaced not disabled...
Hi All,
I've been crawling the web the past few days to find a solution to my problem and unfortunately I didn't...
I have a Asus Zenfone 3 Max ZC520TL MT6737M, I never did a custom OS installation before and didn't know anything about how phone works except the Linux kernel
After 2 or 3 weeks playing with custom rom and recovery, softbrick, fastboot and adb I finally successfully intalled a custom OS, I wanted lineageOS but only found an Himax image working properly (with bluetooth., etc) for my phone and TWRP as custom recovery.
I setted my parameters for all my applications and after inserting my SIM card the network was not working, I tried a factory reset from the phone and then I got stuck in twrp however the way I booted, I tried flashing the os again, the recovery again wiping/formatting data, I was still stuck in TWRP
Then I executed :
fastboot format:ext4 cache
fastboot format:ext4 boot
And now I can't boot nor in twrp nor in fastboot, I can't access the bootloader using power and volume up, and my phone bootloop
Is there a way to get to fastboot to reinstall the recovery and then from here the os or is my phone hardbricked with no future, ready for trash?
Thank you
rominail said:
then I executed :
fastboot format:ext4 boot
Click to expand...
Click to collapse
You completely destroyed phone's boot-loader, what is comparable to a computer's BIOS.
What do you expect? IMO phone is case for the e-waste.
rominail said:
Hi All,
I've been crawling the web the past few days to find a solution to my problem and unfortunately I didn't...
I have a Asus Zenfone 3 Max ZC520TL MT6737M, I never did a custom OS installation before and didn't know anything about how phone works except the Linux kernel
After 2 or 3 weeks playing with custom rom and recovery, softbrick, fastboot and adb I finally successfully intalled a custom OS, I wanted lineageOS but only found an Himax image working properly (with bluetooth., etc) for my phone and TWRP as custom recovery.
I setted my parameters for all my applications and after inserting my SIM card the network was not working, I tried a factory reset from the phone and then I got stuck in twrp however the way I booted, I tried flashing the os again, the recovery again wiping/formatting data, I was still stuck in TWRP
Then I executed :
fastboot format:ext4 cache
fastboot format:ext4 boot
And now I can't boot nor in twrp nor in fastboot, I can't access the bootloader using power and volume up, and my phone bootloop
Is there a way to get to fastboot to reinstall the recovery and then from here the os or is my phone hardbricked with no future, ready for trash?
Thank you
Click to expand...
Click to collapse
You NEVER format your boot partition as ext4 it's a raw boot.img which holds the kernel and ramdisk. You should really do research and follow instructions alittle better than that.. unfortunately I don't think your device can be saved and if you flashed aboot or sbl1/2/3 then your SOL
Thanks
Thank you for your answers!
I don't know why I did that (sometimes I have crazy bad ideas), I didn't see that on internet
rominail said:
Thank you for your answers!
I don't know why I did that (sometimes I have crazy bad ideas), I didn't see that on internet
Click to expand...
Click to collapse
That's okay! Please so make sure you do some research if your new to the custom OS scene.. it's always good to learn new things
maybe you can flash again like from the factory by using the default flashing and ROM tools.
BryanHafidz said:
maybe you can flash again like from the factory by using the default flashing and ROM tools.
Click to expand...
Click to collapse
If your in a Qualcomm chipset and you have an EDL programmer that works for your device I have custom tools in my cloud storage to create an EDL firmware if you don't ready have one. If your on MTK then there is Sugar MTK or SP flash tool that can work. If your an another one you may be out of luck as it seems nobody has been able to restore those chipsets
EDIT: I do have a whole zip file of programmers and one that I use for my LG Zone 2 (msm8x10.mbn)
TheExploitedOne said:
You NEVER format your boot partition as ext4 it's a raw boot.img which holds the kernel and ramdisk. You should really do research and follow instructions alittle better than that.. unfortunately I don't think your device can be saved and if you flashed aboot or sbl1/2/3 then your SOL
Click to expand...
Click to collapse
we have the same problem but I didn't do like you.
I entered these commands
*fastboot flash recovery boot.img (I'm stupid lol)
*fastboot flash boot boot.img
*fastboot reboot*
mahirab23 said:
we have the same problem but I didn't do like you.
I entered these commands
*fastboot flash recovery boot.img (I'm stupid lol)
*fastboot flash boot boot.img
*fastboot reboot*
Click to expand...
Click to collapse
What seems to be going on after the flash?
TheExploitedOne said:
What seems to be going on after the flash?
Click to expand...
Click to collapse
the biggest problem is i have reset the phone and i am stuck with this message: "to start android enter your password". I entered the correct password but another message appears with a reset phone option.
Since the recovery.img file is no longer in the system, the phone keeps making this loop.
mahirab23 said:
the biggest problem is i have reset the phone and i am stuck with this message: "to start android enter your password". I entered the correct password but another message appears with a reset phone option.
Since the recovery.img file is no longer in the system, the phone keeps making this loop.
Click to expand...
Click to collapse
If you can get into fastboot run the following:
fastboot erase recovery
fastboot erase userdata
fastboot format:ext4 userdata
Then reflash your recovery
TheExploitedOne said:
If you can get into fastboot run the following:
fastboot erase recovery
fastboot erase userdata
fastboot format:ext4 userdata
Then reflash your recovery
Click to expand...
Click to collapse
I can't get into fastboot.
another solution?????
mahirab23 said:
I can't get into fastboot.
another solution?????
Click to expand...
Click to collapse
Can you access EDL mode?
TheExploitedOne said:
Can you access EDL mode?
Click to expand...
Click to collapse
thank you for your attention and suggestions.
I haven't tried this method yet.
I'm not good with EDL mode
Can SP tools and MiracleBox help me?
mahirab23 said:
thank you for your attention and suggestions.
I haven't tried this method yet.
I'm not good with EDL mode
Can SP tools and MiracleBox help me?
Click to expand...
Click to collapse
MiracleBox and QPST yes
TheExploitedOne said:
MiracleBox and QPST yes
Click to expand...
Click to collapse
good !!!: o: o
can you develop the method with Miracle Box and QPST ? please!!!
mahirab23 said:
good !!!: o: o
can you develop the method with Miracle Box and QPST ? please!!!
Click to expand...
Click to collapse
I have the tools needed in my cloud I can make into a zip file. You'll need to also do some research on your part but I can also write a readme file too so you have a basic understanding. Just give me a few to get the link
EDIT:
Here you go this has all you'll need for flashing your device in EDL as well as create the firmware if needed
https://mega.nz/file/rc8CVIiB#qnM3_ZzrvCJtp_M7Y9ZftZqDtGgWeN0tqFrLlT30pws
TheExploitedOne said:
MiracleBox and QPST yes
Click to expand...
Click to collapse
thank you
I finally managed to reset the phone thanks to SoftwareDownload
thank you really. you are really kind and available:bien::bien::bien:
mahirab23 said:
thank you
I finally managed to reset the phone thanks to SoftwareDownload
thank you really. you are really kind and available:bien::bien::bien:
Click to expand...
Click to collapse
Absolutely good sir! I'm glad that I can help
TheExploitedOne said:
If your in a Qualcomm chipset and you have an EDL programmer that works for your device I have custom tools in my cloud storage to create an EDL firmware if you don't ready have one. If your on MTK then there is Sugar MTK or SP flash tool that can work. If your an another one you may be out of luck as it seems nobody has been able to restore those chipsets
EDIT: I do have a whole zip file of programmers and one that I use for my LG Zone 2 (msm8x10.mbn)
Click to expand...
Click to collapse
Thank you for your help, unfortunately it's a mediatek
Hi all,
I'm starting to lose hope to get that thing working, despite following many tutorial, so I'm seeking a little help.
I got a Huawei P20 Lite because of battery issue that I fixed because it's a good training for me.
I fixed the battery and I also took the opportunity to Unlock it with the 2 pins and the PotatoNV tool. That part worked great and I'm now Phone and FRP Unlocked but them it went a little downhill and I may have soft-bricked it.
I'm used to Xiaomi phone where it's easy: unlock the bootloader, flash TWRP or OrangeFox, flash ROM, wipe thing and enjoy.
But here, I had to learn to flash a recovery_ramdisk and boot into it. The issue I had with TWRP is I can't seem to "format" Data, the partition is in F2FS and it stay stuck at "Done". So I tried multi tutorial, multi recovery version (TWRP and "stock") and multiple ROM with always issue to the point that now, it stay stuck at the TWRP logo or stuck at the warning when using the stock e-recovery.
I'm trying to understand the exact process to get it to work because following the Lineage tutorial, I get stuck at the wiping of Data and trying to find the right recovery and ROM so I not only can get the phone working but also be able to do update if it's possible on this phone.
I try to reuse the phone instead of putting it in recycle.
Thank for your help!
Hockpold said:
I'm trying to understand the exact process
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543
-Alf- said:
https://forum.xda-developers.com/t/losq-lir-lineageos-17-1-18-1-unofficial-gsi.4219291/post-84305543
Click to expand...
Click to collapse
It stay stuck at the warning when using the eRecovery, so while I can send it, I can't Wipe Data/Factory Reset and through TWRP it also get stuck.
Hockpold said:
It stay stuck at the warning when using the eRecovery, so while I can send it, I can't Wipe Data/Factory Reset and through TWRP it also get stuck.
Click to expand...
Click to collapse
I don't know what the problem is, it works for me and you are the first one to have this problem.
Btw, it's not an eRecovery, it's Recovery .
Follow instructions in OP and use stock Recovery EMUI 9.1.
-Alf- said:
I don't know what the problem is, it works for me and you are the first one to have this problem.
Btw, it's not an eRecovery, it's Recovery .
Follow instructions in OP and use stock Recovery EMUI 9.1.
Click to expand...
Click to collapse
Where can I find the stock recovery? The other post it's either TWRP or the eRecovery.
Hockpold said:
Where can I find the stock recovery? The other post it's either TWRP or the eRecovery.
Click to expand...
Click to collapse
Are you sure?
-Alf- said:
To remove Magisk reinstall stock recovery_ramdisk via TWRP or fastboot , download Here
Click to expand...
Click to collapse
-Alf- said:
Are you sure?
Click to expand...
Click to collapse
Yeah, this one stay stuck at the yellow warning. I still have access to fastboot without issue.
Hockpold said:
Yeah, this one stay stuck at the yellow warning. I still have access to fastboot without issue.
Click to expand...
Click to collapse
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results .
-Alf- said:
In fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results .
Click to expand...
Click to collapse
Alright, here:
* get-build-number:
ANE-LX1 9.1.0.373(C109E7R1P3)
* get-product-model
ANE-LX1
* vendorcountry
orange/all
*oeminforead-CUSTOM_VERSION
ANE-LX1-CUST 9.1.0.7(C109)
*oeminforead-SYSTEM_VERSION
ANE-LX1 8.0.0.155(C109)
You might wanna take a look at my guide.
[GUIDE] [EMUI9] P20 Lite Basics
Special key combos: Power + Vol+ = Recovery Mode While USB connected, Power + Vol+ = Erecovery Mode While USB connected, Vol- = Fastboot Plug USB while holding down Vol+ + Vol- = Download Mode Power + Vol+ + Vol- = Force Dload Flashing Any GSI...
forum.xda-developers.com
Alright, seem like it worked.
I still have the issue that made me into this mess where I can't connect to a password protected Wi-Fi network (and the option to force to stay connected doesn't seem on CAOS unlike Lineage) but at least the rest is working, thank you.
Hockpold said:
I can't connect to a password protected Wi-Fi network
Click to expand...
Click to collapse
It should work with stock Kernel...
-Alf- said:
It should work with stock Kernel...
Click to expand...
Click to collapse
Does https://forum.xda-developers.com/t/kernel-emui-9-p20-lite-phenix-kernel.4241503/ should also work or only the stock one?
Hockpold said:
Does https://forum.xda-developers.com/t/kernel-emui-9-p20-lite-phenix-kernel.4241503/ should also work or only the stock one?
Click to expand...
Click to collapse
Yes, if you started from
TureX said:
Emui version < 9.1.0.300
Click to expand...
Click to collapse
-Alf- said:
Yes, if you started from
Click to expand...
Click to collapse
Alright, so just a fastboot flash kernel phenix.img or should I also do a factory reset (or reflash something else after)?
-Alf- said:
Yes, if you started from
Click to expand...
Click to collapse
HI!
This wifi problem has been fixed, I will release an img as soon as possible.
Cheers
Hockpold said:
Alright, so just a fastboot flash kernel phenix.img or should I also do a factory reset (or reflash something else after)?
Click to expand...
Click to collapse
if you have TWRP installed select Wipe > Advanced wipe > Dalvik/ART Cache, nothing else.
TureX said:
HI!
This wifi problem has been fixed, I will release an img as soon as possible.
Cheers
Click to expand...
Click to collapse
Oh!
That's very nice to hear, I'll be finally able to give a new life to this phone.
Hi guys,
i unlocked the bootloader of my p20lite with PotatoNV and i installed TWRP recovery.
Then i wiped alla data including internal storage. I tried to flashing some ROM (with zip file and with img file), but they don't work(it seems they aren't installed), at every reboot system smartphone shows me TWRP recovery.
I don't know what to do. Do you have any tips please?
Thank you
After attached image i show only TWRP
freddie993 said:
Hi guys,
i unlocked the bootloader of my p20lite with PotatoNV and i installed TWRP recovery.
Then i wiped alla data including internal storage. I tried to flashing some ROM (with zip file and with img file), but they don't work(it seems they aren't installed), at every reboot system smartphone shows me TWRP recovery.
I don't know what to do. Do you have any tips please?
Thank you
After attached image i show only TWRP
Click to expand...
Click to collapse
Look here
https://forum.xda-developers.com/t/i-bricked-my-p20-lite.4449545/#post-86936013
Hi tried to follow those instructions . When i hold both volume button i receive attached screen. i tried to install ROM with sideload method but nothing to do.
freddie993 said:
Hi tried to follow those instructions . When i hold both volume button i receive attached screen. i tried to install ROM with sideload method but nothing to do.
Click to expand...
Click to collapse
Hi,
in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
i can't access in fastboot mode neither from TWRP
i did it @-Alf-
freddie993 said:
i did it @-Alf-
Click to expand...
Click to collapse
does this mean problem solved?
-Alf- said:
does this mean problem solved?
Click to expand...
Click to collapse
unfortunately no , i tried to install system via fastboot but at the reboot i show TWRP....
freddie993 said:
unfortunately no , i tried to install system via fastboot but at the reboot i show TWRP....
Click to expand...
Click to collapse
In fastboot mode flash stock recovery_ramdisk, download Here
Use command fastboot flash recovery_ramdisk RECOVERY_RAMDISK-9.1.img, then run command
fastboot erase userdata, and reboot.
-Alf- said:
In fastboot mode flash stock recovery_ramdisk, download Here
Use command fastboot flash recovery_ramdisk RECOVERY_RAMDISK-9.1.img, then run command
fastboot erase userdata, and reboot.
Click to expand...
Click to collapse
with this command i resolved, the ROM has been installed Thank you , but now i must install again twrp?
freddie993 said:
now i must install again twrp?
Click to expand...
Click to collapse
if you need it ...
My little advice - install TWRP instead of eRecovery, it makes things easier... And please use RECOMMENDED TWRP , not this sh... 3.5.2 and above.
-Alf- said:
if you need it ...
My little advice - install TWRP instead of eRecovery, it makes things easier... And please use RECOMMENDED TWRP , not this sh... 3.5.2 and above.
Click to expand...
Click to collapse
i'd installed
twrp-3.6.1_9-0-anne is this wrong for you??
freddie993 said:
i'd installed
twrp-3.6.1_9-0-anne is this wrong for you??
Click to expand...
Click to collapse
this TWRP has caused you problems, but I will not force my opinion on you.
Happy flashing!
-Alf- said:
this TWRP has caused you problems, but I will not force my opinion on you.
Happy flashing!
Click to expand...
Click to collapse
don't worry. thank you very much for your tips
freddie993 said:
don't worry. thank you very much for your tips
Click to expand...
Click to collapse
hey hi id like to know which version of twrp you ended up installing? if any.
had the same issue as you and solved it the same way but id like to keep twrp as my main recovery
James1807 said:
hey hi id like to know which version of twrp you ended up installing? if any.
had the same issue as you and solved it the same way but id like to keep twrp as my main recovery
Click to expand...
Click to collapse
hi, sorry for waiting, i have 3.5.1 version
freddie993 said:
hi, sorry for waiting, i have 3.5.1 version
Click to expand...
Click to collapse
ok and uh any special procedure to keep twrp as your main? or you just flashed it to the recovery like that and thats it?
James1807 said:
ok and uh any special procedure to keep twrp as your main? or you just flashed it to the recovery like that and thats it?
Click to expand...
Click to collapse
just flashed to the main recovery, but they both remained and for enter in the twrp i must push vol up+down togheter.