So I bought the pace model.
Did an interval workout on the treadmill, after I checked the app it measured 195 heartbeats/second. Which was nice and well becase i know thats where I end up at the end of those 4 minutes.
However, after that I did some strength training, and then finished off with some uphill walk on the treadmill where the treadmill measued 150 BPS, and my watch... 88 BPS. I know 150 is more accurate because my breath was around there.
After that, it hasnt been able to register anything over 110 BPS. Tried it for several workout sessions, still doesnt measure above 110. I tried factory reset.. doesnt change anything.
Someone else seen this?
I'm testing one amazfit and comparing with one garmin 630.
Amazfit measures correct just after 10 minutes of workout and then, after some minutes it measures wrong about a minute or two, and back to measure correct again.
Very bad algorithm.
Has nothing to do with bad algorithm.
Why do you guys think that there is no gym workout on the watch?
Because there is no known wrist hr sensor that is working correct for that.
Doing workouts means bending and flexing the wrist, which means that the sensor looses contact, which means inaccuracy .
And 90% of people that complain, have the sensor on a spot that is not really working.
Have seen very hairy guys complaining or people that have the watch "between the hand and the bone".
And make sure it is tight.
jhenrikb said:
I checked the app it measured 195 heartbeats/second.
Click to expand...
Click to collapse
Holy crap, 195 beats PER SECOND!!?!! How are you still alive? Are you The Flash? Or possibly some kind of super smart hummingbird with an xda account (that would be cool).
Jokes aside, I also find the HRM on the Pace problematic.
It seems to work ok when you do "check now" as long as you stay still and its on tight. But whenever I use continuous HRM or do an activity like biking the reading seems to be about 20+ bps too high.
For example, I did "check now" just before a bike ride and got 65bpm, then again right after the ride and got 104bpm, but the bike activity recorded a starting heart rate of 84bpm and an ending rate of 134bpm.
yeah, sometimes my watch seems to measure my heart rate correctly, but other times it shows quite strange results.
I just finished indoor cycling workout. I used together Suunto Ambit watch with HR strap and Amazfit Pace. Amazfit HR data is useless. Here is merged image with both graphs.
Amazfit was tight, and my hand didn't moved to much. I tried several times to move hand on different positions to check is there any improvement, but without change.
Here is paralel graph (top is Suunto, bottom is Amazfit)
sometimes when physical exertion increases (when I go up a slope, for example) the heart beats are reduced.
The HR sensor in the pace seems about as accurate as someone guessing your heart rate from across the room.
Yes the bip is the same.
Absolute ****.
I've compared it with Polar watch + chest strap. There were differencies in the meassured pulse, however the average pulse for the trainings was very close on both devices. What is important for Peace, it has to be fastened very tightly on the wrist.
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
I have compared Amazit Pace (1.3.6d) with Garmin Chest Strap HR monitor and FR235 doing Interval training running, and to FR235 optical HR monitior doing indoor biking.
In both activities Amazit Pace worked inestable the first 10 min then worked showing nearly same HR thank Strap HR and optical HR monitors.
Amazfit Pace showed a sudden decrease in HR reading about the middle of activities (about 1 hour each) and then back to proper reading.
In summary, Amazfit Pace uses about 10 min to have proper HR values, and sometimes during the activity has sudden decreases in HR reading.
For the rest of activity it performs quite well.
but you know that you can pair amazfit with a heart rate monitor strap, for example Polar H7?
This is about the Pace, and that can't be paired with a strap.
fzelle said:
This is about the Pace, and that can't be paired with a strap.
Click to expand...
Click to collapse
oh, ok, i was talking about Stratos
heart rate sensor go crazy
I have the pace model too
sometimes (recently with more frequency) the heart rate sensor go crazy
yesterday, when i did an Indoor Run, he show the alert: "heart rate too low: 75", seconds after this, he show: "heart rate too high: 185", seconds after: "heart rate too low: 81", "heart rate too high: 172", etc etc.
Someone else seen this?
Someone know how to fix it?
ahander said:
I have the pace model too
sometimes (recently with more frequency) the heart rate sensor go crazy
yesterday, when i did an Indoor Run, he show the alert: "heart rate too low: 75", seconds after this, he show: "heart rate too high: 185", seconds after: "heart rate too low: 81", "heart rate too high: 172", etc etc.
Someone else seen this?
Someone know how to fix it?
Click to expand...
Click to collapse
Is the watch brand new? Do you sweat a lot? Check the cover of the HR sensor, some people that had used the watch while bathing/showering had problem with the cover getting loose.
lfom said:
Is the watch brand new? Do you sweat a lot? Check the cover of the HR sensor, some people that had used the watch while bathing/showering had problem with the cover getting loose.
Click to expand...
Click to collapse
I bought my pace in Feb/18 (3 months ago)
my sweat is near to zero
never bath/shower using it
the pace work well until one week ago, when i need to do a factory reset because something was draining the battery too fast (one charge in one night)
after the reset, the battery issue has gone, and the watch work well until yesterday (when the HR sensor issue start)
thinking about do one more factory reset... :fingers-crossed:
just to illustrate: HR (red) x Cadence (blue)
alexhan said:
I have the pace model too
sometimes (recently with more frequency) the heart rate sensor go crazy
Someone know how to fix it?
Click to expand...
Click to collapse
Same issue here, with every Rom update HR accuracy gets worse in Sports activities. Continuous HR monitor seems accurate when compared to my chest strap, but goes haywire and at least 50% off true when in Run Indoor and Cycle indoor. Elliptical seems to be accurate at least some of the time. Have factory reset many times but nothing seems to help.
Yesterday I realized that with new ROM update, Peace have option to connect to other Bluetooth sensor(s).
I tested it and it with cheap 20$ Bluetooth sensor and works nice.
So how's other people experience with the BIP's HR monitor.
I was expecting it to be not as good as chest straps.
but today i tried for the first time while doing intense exercise(squash).
So before i started when my HR was still low i started the indoor run activity, with the watch quite tight around my wrist.
During the sport sesj i looked at the screen many times and it never showed above ~105ish
so at some point i stopped an measured manually, and found a rate of >150
and this was continuous for 40 minutes.
I understand slight deviation but this is basically not even close.
I also tried to untighten it a bit and also tried it on the bottom of the hand. nothing really helped, i never saw it go above 110.
Any other's have better experience with high HR exercise?
Sadly I have same experience as you. It tends to show significantly lower HR rates during workouts. Only few times I was able to measure something above 150. Mostly when I am about 160bpm it shows only maximally 110 and sometimes even bellow 90! So my experience is that's it's good only to track sleep HR. Only those rates makes sense on BIP
My Bip’s heart rate monitor seems to be working fine when I am resting. I have detection frequency set for every 5 minutes. However, when I am working out, I am not getting anywhere close to an actual reading. The detection is updating frequently, which it is supposed to do when you’re increasing your intensity. However, the reading stays low even when it’s clear my heartbeat is well over 100. When I say low, I’m not exaggerating. Last night, the reading dipped into the 40s while I was working out. I couldn’t even come close to that while resting.
Additionally, once my workout was done, it actually gave me an accurate reading of a heart rate over 100. Just not during the workout. The app is also not showing that I was in an intensive state. Its very confusing.
Does anyone know how to troubleshoot the Bip to get an accurate HR reading while working out? This is one of the main reasons I bought the watch in the first place.
Thank you.
Same issue here..
To me It seems like the watch only gives more accurate values when my actual heartbeat is under 90-100..
Hi guys,
I just got my new Amazfit GTR and noticed strange behavior of heart rate monitor. It shows values even if the device is not on my wrist. I left the device on the table for more than hour and any time I looked on main screen there was heart rate value and it was also changing the values. So it wasn't just last value stuck. I tried to run exercise activity while leaving device on the table and it was showing heart rate as well. Not all the time but sometimes there was value and sometimes not. So is the device faking heart rate values? Is it normal behavior?
It is how PPG sensors work, they use the reflected light to estimate the number of beats. Search the internet for more info.
Well, I have another watch with PPG sensor but they don't show nothing when they are not on wrist.
So it will probably not be about sensor type. In this case they for example report my rest heart rate during the night even if they lay next to me on the table so the values will be completely faked.
The sensor works that way, but other devices may use *other* sensors to disable the reading when they detect the watch isn't being used, the accelerometer for instance.
HR
lfom said:
The sensor works that way, but other devices may use *other* sensors to disable the reading when they detect the watch isn't being used, the accelerometer for instance.
Click to expand...
Click to collapse
HEyy,
- Also got 2 other product with the same comportment `` Fitbit Charge Hr ´´ and `` Fitbit Blaze ´´ , both detect when they are not in the wrist. Why doen's GTR do the same?
- Also both got more accuracy in Heart rate measurments...Because they are doing it consistently. With Amazfit GTR i only can program it to do it 1min in 1min. Already change it with Notify & Fitness. nothing seems to change....
- Another outburst from my side : heart rate scale doen't save scores higher than 180 BTM !
Are some of them just software issues ?
Regards to all
The heart beat sensor on the GTR is utter garbage. It does indeed fake heart beat results. Also the sleep analysis functionality is totally broken.
Just got my GTR and the heart rate monitoring is way off. Always some 20 to 35 Beats above the real one. As I have some hair I tried it in my finger and in my belly with the same wrong results. The firmware version is 1.3.4.19 which was updated immediately after first turn on. In contrast the free Android app I use is pretty accurate. I will still test the GPS.
Kaka0 said:
Just got my GTR and the heart rate monitoring is way off. Always some 20 to 35 Beats above the real one. As I have some hair I tried it in my finger and in my belly with the same wrong results. The firmware version is 1.3.4.19 which was updated immediately after first turn on. In contrast the free Android app I use is pretty accurate. I will still test the GPS.
Click to expand...
Click to collapse
I returned the GTR and got another one from another vendor and it has the same problem. I can now say that the heart rate monitoring in the GTR is useless, just a boring toy.
Amazfit admits that the heart rate monitor is "prone to inaccuracies" in its faq: https://support.amazfit.com/us/faq/839
As the heart rate sensor is basically a pulse oximeter which monitors the perfusion of blood to the dermis, it’s prone to inaccuracies.That’s because skin perfusion — a measure of how much blood flows through your skin-varies significantly from person to another. Especially the ones who have dark skin, hairy wrists, tattoo, and scar.
Click to expand...
Click to collapse
Kaka0 said:
Amazfit admits that the heart rate monitor is "prone to inaccuracies" in its faq: https://support.amazfit.com/us/faq/839
Click to expand...
Click to collapse
Oddly enough I have found the heart rate monitor to be remakably accurate if worn correctly and over the range 60-110. A few moments ago I confirmed previous results and while the watch showed 91 bpm a simultaneous ECG showed 90 bpm. The problem I have with the HR monitor is that it seems, when the cpu is stressed, to produce crazy results. To get around this I run exercise from the phone and get sensible results from the HR monitor. I might add that I was cooling down after exercise!
Well seems I am testing today. Had the watch about 2 days. I am guessing the watch does NOT show the current temperature? Like that matters. The GPS took about 45-60 seconds to connect, as others had. Seem to do faster NOT on wrist. Now my heart-rate monitor works really good. Tested it and I when I got 86 the watch got 85. did it again I got 84 thee watch got 85. Now I did take it off put it on the rubber mat and it kept going up to about 96 lol Put on my keyboard( light on top of keys) it went down to 40. Yet on my wrist works really good.
I am currently on day 8 since last full charge.
AOD off.
Lift wrist to display off.
Total 5 days' gym workout comprises 43 sessions (with total 614 mins/5864 calories/60km run & walk).
Watch faces synced at least 30~40 times.
HR at 1-minute interval. Sleep assistant only enabled after day 5.
My GTR-2e is currently showing 54%. By calculation, I would expect it to last 17 days per single charge. It is much better than I earlier expected. Amazfit has not exaggerated on its claim that the watch can last for 24 days on typical use.
Hi, I wanted to ask if you know as I'm interested also to get it but searching online i couldn't find anything.
Does the GTR2e has rowing workout ?
I saw that it received an updated that increased the total supported workouts to 90 but i can't find anywhere a list with the supported workouts.
Thanks
I just checked. There is no rowing workout. My watch is updated.
Both indoor or outdoor rowing not available.
You can see also this post:
https://www.reddit.com/r/amazfit/comments/ljciuz
oh, thats a bummer.
Thank you for checking it.
Can you confirm that GTR2e can show AOD if lift to wake is active?