I am not responsible for bricked devices and dead SD cards. YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
ZS570KL/ZS570KL PRO: MOD EDIT: PAY-PER-CLICK LINKS REMOVED
Guide is in the folder
Saktis_STi said:
I am not responsible for bricked devices and dead SD cards. YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
ZS570KL/ZS570KL PRO: MOD EDIT: PAY-PER-CLICK LINKS REMOVED
Guide is in the folder
Click to expand...
Click to collapse
are these raw files sir? my cp still bricked. i'm having an error on that contexts.xml.
geezazkrays said:
are these raw files sir? my cp still bricked. i'm having an error on that contexts.xml.
Click to expand...
Click to collapse
This is QFIL files (used to unbrick the phone)
Saktis_STi said:
This is QFIL files (used to unbrick the phone)
Click to expand...
Click to collapse
ok gonna try it. cuz mine was on an old HS-USB 9008. i'll let you know later. gonna try to install a windows 7 virtualbox first. thank you.
geezazkrays said:
ok gonna try it. cuz mine was on an old HS-USB 9008. i'll let you know later. gonna try to install a windows 7 virtualbox first. thank you.
Click to expand...
Click to collapse
USB 9008/EDL/QCOMM 9008 is the same thing
Saktis_STi said:
USB 9008/EDL/QCOMM 9008 is the same thing
Click to expand...
Click to collapse
https://forum.xda-developers.com/yu...oad-mode-k-t3068040/post59777685#post59777685
yeah but they said here theres 2 kinds of HS-9008. the new one that you will still be able to access your sd-card, led light and vibrate. mine is just dead, i can only see that hs-9008 if i plug it to my computer.
Saktis_STi said:
I am not responsible for bricked devices and dead SD cards. YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
ZS570KL/ZS570KL PRO:
Guide is in the folder
Click to expand...
Click to collapse
for the first ime in a year alms that qfil program sucessfully flashed my phone its still wont boot but all the files flashed completly in qfil any reccomendations
---------- Post added at 01:35 PM ---------- Previous post was at 01:19 PM ----------
dcraffam said:
for the first ime in a year alms that qfil program sucessfully flashed my phone its still wont boot but all the files flashed completly in qfil any reccomendations
Click to expand...
Click to collapse
update finaly i fixxed my zenfone 3 after 7 months of trying thanks truley dude your a genuis
dcraffam said:
for the first ime in a year alms that qfil program sucessfully flashed my phone its still wont boot but all the files flashed completly in qfil any reccomendations
---------- Post added at 01:35 PM ---------- Previous post was at 01:19 PM ----------
update finaly i fixxed my zenfone 3 after 7 months of trying thanks truley dude your a genuis
Click to expand...
Click to collapse
No problem. If possible, write detailed steps below so that you could help other users :good:
How to unbrick Zenfone 3 zs570kl
Download the zs570kl_test.rar from Google drive above
Download qfil package install qfil
Download all files in tools folder replace update_edl_image and provision files with the ones in the folder
Run
bcdedit /set loadoptions DISABLE_INTEGRITY_CHECKS
bcedit /set testsigning ON
In a administrative CMD prompt .
Open qfil at the top in configuration change emmc to ufs and check skip write .
Load in the firehouse.programmer at the bottom in the
dialogue u may have to change from .mbn to .elf
Next load in the raw programs highlight and select them all same for the patch files
Last part is a little tricky plug in device make Shure it's shows the com number click download then hold the power button until it restarts then immediately press download again and it will send the firehouse program hopefully you see a bunch of okay and success.
Next navigate to the zs570kl_test.rar folder you downloaded and run update_image_edl phone will reboot on success
dcraffam said:
How to unbrick Zenfone 3 zs570kl
Click to expand...
Click to collapse
Thanks man!
Saktis_STi said:
Thanks man!
Click to expand...
Click to collapse
hey Saktis_STi thanks man but I didnt able to use your qfil. I was just keep pressing the volume +/- then pressing the power for about 10secs. i didnt let go of that volume for about 15mins or less lol til i felt that vibrate. i was about to reformat my laptop. anyway thanks man!
geezazkrays said:
hey Saktis_STi thanks man but I didnt able to use your qfil. I was just keep pressing the volume +/- then pressing the power for about 10secs. i didnt let go of that volume for about 15mins or less lol til i felt that vibrate. i was about to reformat my laptop. anyway thanks man!
Click to expand...
Click to collapse
Since it's on FASTBOOT Mode, try flashing RAW firmware.
Follow this: https://forum.xda-developers.com/zenfone-3-deluxe/how-to/downgrade-t3796133
Saktis_STi said:
Thanks man!
Click to expand...
Click to collapse
Saktis_STi said:
Since it's on FASTBOOT Mode, try flashing RAW firmware.
Follow this: https://forum.xda-developers.com/zenfone-3-deluxe/how-to/downgrade-t3796133
Click to expand...
Click to collapse
yeah I did it already using that asus flashtool but the tool told me to run the script that. I did successfully flashed everything, but i got 1 problem. touchscreen aint working lol
---------- Post added at 06:08 PM ---------- Previous post was at 05:57 PM ----------
Saktis_STi said:
Since it's on FASTBOOT Mode, try flashing RAW firmware.
Follow this: https://forum.xda-developers.com/zenfone-3-deluxe/how-to/downgrade-t3796133
Click to expand...
Click to collapse
its okay now Saktis. I just reflashed everything again. thank you so much!
geezazkrays said:
hey Saktis_STi thanks man but I didnt able to use your qfil. I was just keep pressing the volume +/- then pressing the power for about 10secs. i didnt let go of that volume for about 15mins or less lol til i felt that vibrate. i was about to reformat my laptop. anyway thanks man!
Click to expand...
Click to collapse
that doesn't look like the version. He provided many that's the reason on fail I use 2.005 to update mine
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
Saktis_STi said:
Since it's on FASTBOOT Mode, try flashing RAW firmware.
Follow this: https://forum.xda-developers.com/zenfone-3-deluxe/how-to/downgrade-t3796133
Click to expand...
Click to collapse
where did you find these files
oppsss wrong post.
dcraffam said:
that doesn't look like the version. He provided many that's the reason on fail I use 2.005 to update mine
---------- Post added at 06:55 PM ---------- Previous post was at 06:54 PM ----------
where did you find these files
Click to expand...
Click to collapse
I have a friend who is working in ASUS Service Centre
dcraffam said:
How to unbrick Zenfone 3 zs570kl
Download the zs570kl_test.rar from Google drive above
Download qfil package install qfil
Download all files in tools folder replace update_edl_image and provision files with the ones in the folder
Run
bcdedit /set loadoptions DISABLE_INTEGRITY_CHECKS
bcedit /set testsigning ON
In a administrative CMD prompt .
Open qfil at the top in configuration change emmc to ufs and check skip write .
Load in the firehouse.programmer at the bottom in the
dialogue u may have to change from .mbn to .elf
Next load in the raw programs highlight and select them all same for the patch files
Last part is a little tricky plug in device make Shure it's shows the com number click download then hold the power button until it restarts then immediately press download again and it will send the firehouse program hopefully you see a bunch of okay and success.
Next navigate to the zs570kl_test.rar folder you downloaded and run update_image_edl phone will reboot on success
Click to expand...
Click to collapse
Thanks for the instruction!
However I have problem at some points.
1) bcedit /set testsigning ON
I cannot finish due to it is protected by secure boot policy
2) with the cmd command above, we continue to qfil command and the result is ok. I think I could finish downloading until the end of process.
3) I do not know how to run update_image_del.bat file. I ran as administrator, but it says it cannot find some files. such test1.txt
We appreciate your advice if I made some mistake during the steps.
Thanks!
eric2122 said:
Thanks for the instruction!
However I have problem at some points.
1) bcedit /set testsigning ON
I cannot finish due to it is protected by secure boot policy
2) with the cmd command above, we continue to qfil command and the result is ok. I think I could finish downloading until the end of process.
3) I do not know how to run update_image_del.bat file. I ran as administrator, but it says it cannot find some files. such test1.txt
We appreciate your advice if I made some mistake during the steps.
Thanks!
Click to expand...
Click to collapse
To run the edl_update_image you have to hold the power button and run the program at the same time as soon as you hear the computer make noise start the program
Thanks for your instruction. I now used the other PC with windows 7 64bit OS. and everything goes well until the step of download on qfil. but I still have problem to execute "update_image_edl.bat".....I run cmd as administrator, but cmd says start ufs flat download. cannot find the file test1.txt... I pressed power bottom on the device and I hear reconnected sound on PC and run the command at different timing, but still failed. off course the phone did not reboot.. I hope you can help me out of the situation. Thanks!
eric2122 said:
Thanks for the instruction!
However I have problem at some points.
1) bcedit /set testsigning ON
I cannot finish due to it is protected by secure boot policy
2) with the cmd command above, we continue to qfil command and the result is ok. I think I could finish downloading until the end of process.
3) I do not know how to run update_image_del.bat file. I ran as administrator, but it says it cannot find some files. such test1.txt
We appreciate your advice if I made some mistake during the steps.
Thanks!
Click to expand...
Click to collapse
GEEPOP said:
Thanks for your instruction. I now used the other PC with windows 7 64bit OS. and everything goes well until the step of download on qfil. but I still have problem to execute "update_image_edl.bat".....I run cmd as administrator, but cmd says start ufs flat download. cannot find the file test1.txt... I pressed power bottom on the device and I hear reconnected sound on PC and run the command at different timing, but still failed. off course the phone did not reboot.. I hope you can help me out of the situation. Thanks!
Click to expand...
Click to collapse
Did you replace the update_edl and provision_samsung with the ones you downloaded I can upload that test1 and many it will work for you
---------- Post added at 09:35 PM ---------- Previous post was at 09:25 PM ----------
dcraffam said:
Did you replace the update_edl and provision_samsung with the ones you downloaded I can upload that test1 and many it will work for you
Click to expand...
Click to collapse
this test file comes from the completion of qfil as its just my log from when i ran it but you can still try really we have to get qfil going for you
Related
Already posted this 5 times on 3 sites and just not getting a lot of help. If it's bricked, fine, tell me. If it can be fixed, give me ideas.
I can't flash the bootloader or boot in any possible way. not through adb, not through tool kit, not through nexus 7 restore, nothing.
I can access fastboot mode (power+vol down) but nothing else. Standard power on gets stuck on google screen. It is unlocked. I have tried 3 different USB ports and 6 cables with no change.
No BS please, either Yes it's bricked sorry or No, it's not bricked, here are some ideas.
now i see that i'm not alone
same problem here, nobody ? It's a powerfull tablet, maybe now is going to be a powerfull paperweight, big paperweight, so sad.
can you boot into download mode if u can then
1.put your device into download mod 2.download the official firmware for your device on your computer
3.connect yor phone into your computer and flash it
if you can't boot into download mod then sorry I think it's bricked try to bring it to a service center
Sent from my SM-N7505 using XDA Free mobile app
pls answer me so I can help you
I couldn't help myself... I love my Nexus 7.
mrdownboy said:
I couldn't help myself... I love my Nexus 7.
Click to expand...
Click to collapse
LOL
and
zidozido22, i can boot just in fastboot mode
j4k0 said:
LOL
and
zidozido22, i can boot just in fastboot mode
Click to expand...
Click to collapse
Does the PC recognize? If you run the "fastboot devices" does it return a serial number? These things are pretty difficult to hard brick and if you can still get to the bootloader, then chances are it is recoverable. It helps to mention what you did for it to get to this state as well.
es0tericcha0s said:
Does the PC recognize? If you run the "fastboot devices" does it return a serial number? These things are pretty difficult to hard brick and if you can still get to the bootloader, then chances are it is recoverable. It helps to mention what you did for it to get to this state as well.
Click to expand...
Click to collapse
yes, it sends the serial number but when I had tried to flash it then it returns an error.
.***now im trying again with SkipSoft Android Toolkit, but it is stuck waiting for adb mode
before that state, it was charging, just that.
The tablet got Android 5 from OTA, and then android 5.1, i was using it as normal, but one day, while it was charging, it just show the google logo (name) and the lock down.
My 2012 wifi did that exactly. I downloaded wugfresh Nexus Root Toolkit yours can be d/loaded from here http://forum.xda-developers.com/showthread.php?t=2389107
All i did was put my 7 in fastboot mode then ran the tool kit. I then launched the advanced utilities and then fastboot format. Then i flashed stock rom.
Worked a treat. Thought mine was toast as well good luck.
snod33 said:
My 2012 wifi did that exactly. I downloaded wugfresh Nexus Root Toolkit yours can be d/loaded from here http://forum.xda-developers.com/showthread.php?t=2389107
All i did was put my 7 in fastboot mode then ran the tool kit. I then launched the advanced utilities and then fastboot format. Then i flashed stock rom.
Worked a treat. Thought mine was toast as well good luck.
Click to expand...
Click to collapse
I tried once, but i will try it again, thank you
---------- Post added at 12:25 AM ---------- Previous post was at 12:09 AM ----------
doing that you said:
Advanced tools--> fastboot format
now it is stuck in "Fastboot Formating CACHE..."
=(
i think the main problem (one o f them) is that i cannot use adb, when i use the command
Code:
fastboot devices
i get the serial number but when i use
Code:
adb devices
the results is nothing.
j4k0 said:
I tried once, but i will try it again, thank you
---------- Post added at 12:25 AM ---------- Previous post was at 12:09 AM ----------
doing that you said:
Advanced tools--> fastboot format
now it is stuck in "Fastboot Formating CACHE..."
=(
Click to expand...
Click to collapse
I hate to be the bearer of bad news, but that's not a good sign. I haven't found anyone reporting success when it's having that issue. If you have exhausted the external possibilities such as drivers, USB cords, the PC, trying Windows and Linux, etc and still getting the same thing then that means the eMMC is probably messed up. Examples here:
http://forum.xda-developers.com/showthread.php?t=2602638
can you boot into bootloader if you can then navigate by using volume up volume down till you find the recovery and press lock button and factory reset
zidozido22 said:
can you boot into bootloader if you can then navigate by using volume up volume down till you find the recovery and press lock button and factory reset
Click to expand...
Click to collapse
They're way past the point that a factory reset would help or even work as wiping cache is not working and that is part of a factory reset. If it isn't wiping through fastboot commands, it definitely won't work through recovery.
sorry, then you should bring it to a service center
very hard and sad to hear that, thank you anyway guys...
about RMA i saw that will be expensive bcz the warranty time expired
OK So... I decided to root my TF103c (K010) so I remove some of the stupid crapware that asus has installed and I gained root fine and went ahead and started removing stuff. But apparently I removed something I shouldn't have and now I'm constantly getting Asus Services has stopped messages and I can't actually do anything with the damn thing. Because it has such a crap locked down recovery and bootloader etc. I can't seem to find any easy way around this. As in I can't just load all the things I uninstalled from the backups because I can't use ADB with the device. (Yes it WAS turned on in the settings until I formatted cache and data in case that might fix it... it didn't)
Does anybody have any advice?? Coz I'm stumped...
fastboot
RaVe-N said:
OK So... I decided to root my TF103c (K010) so I remove some of the stupid crapware that asus has installed and I gained root fine and went ahead and started removing stuff. But apparently I removed something I shouldn't have and now I'm constantly getting Asus Services has stopped messages and I can't actually do anything with the damn thing. Because it has such a crap locked down recovery and bootloader etc. I can't seem to find any easy way around this. As in I can't just load all the things I uninstalled from the backups because I can't use ADB with the device. (Yes it WAS turned on in the settings until I formatted cache and data in case that might fix it... it didn't)
Does anybody have any advice?? Coz I'm stumped...
Click to expand...
Click to collapse
are you still having problems? do you have a pc with adb installed and or fastboot?
---------- Post added at 12:19 PM ---------- Previous post was at 12:09 PM ----------
majored said:
are you still having problems? do you have a pc with adb installed and or fastboot?
Click to expand...
Click to collapse
ok well open a command window or if you have windows you can use powershell type adb devices enter anything? If that got you nothing while the device is powered on then power off device . With the device off press and hold vol up and power btton when device powers on release power button but continue holding vol up. if its charging the battery icon can mess this process up so unhook your device if your having problems you should boot to droidboot (aka FASTBOOT) where your adb commands will simply start Ex. fastboot devices it should read your device.
---------- Post added at 12:26 PM ---------- Previous post was at 12:19 PM ----------
majored said:
are you still having problems? do you have a pc with adb installed and or fastboot?
---------- Post added at 12:19 PM ---------- Previous post was at 12:09 PM ----------
ok well open a command window or if you have windows you can use powershell type adb devices enter anything? If that got you nothing while the device is powered on then power off device . With the device off press and hold vol up and power btton when device powers on release power button but continue holding vol up. if its charging the battery icon can mess this process up so unhook your device if your having problems you should boot to droidboot (aka FASTBOOT) where your adb commands will simply start Ex. fastboot devices it should read your device.
Click to expand...
Click to collapse
Well what i did was flash a recovery not compatible with my k010 but this did not stop me from booting to droidboot however my stock recovery for now is gone . my device was doing this too had about minute or so once powered on till it crashed. MY BLUETOOTH Went out and in my settings the on off would slide back and forth till it crashed but best buy sold me a 40$ one year warranty SUCKERS and asus installed a new one
majored said:
are you still having problems? do you have a pc with adb installed and or fastboot?
---------- Post added at 12:19 PM ---------- Previous post was at 12:09 PM ----------
ok well open a command window or if you have windows you can use powershell type adb devices enter anything? If that got you nothing while the device is powered on then power off device . With the device off press and hold vol up and power btton when device powers on release power button but continue holding vol up. if its charging the battery icon can mess this process up so unhook your device if your having problems you should boot to droidboot (aka FASTBOOT) where your adb commands will simply start Ex. fastboot devices it should read your device.
---------- Post added at 12:26 PM ---------- Previous post was at 12:19 PM ----------
Well what i did was flash a recovery not compatible with my k010 but this did not stop me from booting to droidboot however my stock recovery for now is gone . my device was doing this too had about minute or so once powered on till it crashed. MY BLUETOOTH Went out and in my settings the on off would slide back and forth till it crashed but best buy sold me a 40$ one year warranty SUCKERS and asus installed a new one
Click to expand...
Click to collapse
Thanks for the reply.
I have a adb and fastboot but most of the commands just don't work. I tried to remotely install apks but that fails. I tried to side load the latest FW downloaded from ASUS but it fails the certificate check. Basically I'm just waiting for the next system update to come OTA and I'll try flashing that... No idea when that will be of course...
Thanks for trying to help though.
Flashing Firmware using DROIDBOOT:
Instructions: https://drive.google.com/file/d/0B_JkvfrnO7pXMzVaZEM5OFF2ZGM/view
Download: https://yadi.sk/d/fduOPFuhes3dC or https://drive.google.com/file/d/0B_JkvfrnO7pXSHc1RGhzak1DN2c/view
(Fastboot incudled, partitions images in .img format, adb incudled, but not needed)
i dont have runned update_image.bat. i needed only recovery and system.
fastboot flash recovery recovery.img
fastboot erase system
fastboot flash recovery recovery.img
fastboot flash system system.img
but you need to find some fastboot drivers for tablet.
i have used intel soc. drivers. but yet i dont have download link.
just google search to TF103C fastboot/driodboot drivers.
where's firmware
RaVe-N said:
Thanks for the reply.
I have a adb and fastboot but most of the commands just don't work. I tried to remotely install apks but that fails. I tried to side load the latest FW downloaded from ASUS but it fails the certificate check. Basically I'm just waiting for the next system update to come OTA and I'll try flashing that... No idea when that will be of course...
Thanks for trying to help though.
Click to expand...
Click to collapse
whare did you find firmware on asus site. i go to support and all i see is Kernel Code and manuals.
---------- Post added at 03:00 PM ---------- Previous post was at 02:55 PM ----------
Ok I fastboot flash 2.2.33.138. with no help from asus. but jacky_cao <[email protected]> got this reply i suggest you to contact the RMA center again . they will help you to update the firmware to (FW_WW_TF103C-2.2.33.144-release-user-20150827-signed.zip ) manually. But can't tell me how to contact anybody to help do that. does anybody here have the files needed to ota up to 144?
Guys, I followed the instructions from gouster3, but my Asus still hangs up during the boot. I just see the logo ASUS In search of incredible and that is it.
I too had a problem having foolishly erased an apparently needed system app after rooting. After many hours off and on of trying to sideload the latest firmware from ASUS i finally found this thread and success.
1) Of course put device in DROIDboot (fastboot). From power off, reboot tablet holding power + vol up for 2-3 seconds.
Per Post #4
[Cannot post url due to restrictions, get links from post #4. use the 2nd link in post, first link is dead]
(Fastboot included, partitions images in .img format, adb included, but not needed)
unpack zip and launch adb. (i already had an install of minimal adb and fastboot so I only moved boot, recovery, system, droidboot, flash, partition.tbl and AS-TF103C-v67.43-capsule.bin to that folder and launched from there. In hindsight I only probably needed system, flash, partition and capsule and might not have needed anything but system...)
fastboot erase system
fastboot flash system system.img
This takes a few minutes in which it appears nothing is happening... and then system is sent in 3 chunks.
Upon launch process.google.apps or something kept crashing and I could not log into google, but a reset from within the OS fixed that and I was back in business. I probably should have loaded recovery and cleared the cache and such and then rebooted, but i got hasty.
Anyway I know this is an old problem and people have probably moved onto other things, but for someone like me who has had this once wonderful device sitting around waiting for a new breathe of life and the energy to take another stab at it out, don't give up. And thanks to all the gurus here for all the help over the years...
gouster3 said:
Flashing Firmware using DROIDBOOT:
Instructions: https://drive.google.com/file/d/0B_JkvfrnO7pXMzVaZEM5OFF2ZGM/view
Download: https://yadi.sk/d/fduOPFuhes3dC or https://drive.google.com/file/d/0B_JkvfrnO7pXSHc1RGhzak1DN2c/view
(Fastboot incudled, partitions images in .img format, adb incudled, but not needed)
i dont have runned update_image.bat. i needed only recovery and system.
fastboot flash recovery recovery.img
fastboot erase system
fastboot flash recovery recovery.img
fastboot flash system system.img
but you need to find some fastboot drivers for tablet.
i have used intel soc. drivers. but yet i dont have download link.
just google search to TF103C fastboot/driodboot drivers.
Click to expand...
Click to collapse
THANKS I bricked my tf103c and this fixed it and got it working again
Do you have any easy guide on installing a custom rom to this device in this way?
I use Zenfonerootkit_20150528 to root the device and it works fine
I just can never find a rom or such or guide on this :/ ( i found this old device and thought i would have a mess with it)
I
Hello everyone
I hope you all are around I really need your help at it again, I have got an asus tf 103c i tried to root it and now I get a bootloop i tried everything but failed. Please I know you will be angry because you already explained everything but I am a verry beginner and also many links are dead I need your help.
Thank you from advance
Please! If someone can help me. I did step by step correctly and my le max 2 still with original recovery. All cmd messages are successful, but when I turn on recovery mode, this is the original EUI version. I wanted to use some rom of you but without the TWRP I can not. Some help?
lucasnoman said:
Please! If someone can help me. I did step by step correctly and my le max 2 still with original recovery. All cmd messages are successful, but when I turn on recovery mode, this is the original EUI version. I wanted to use some rom of you but without the TWRP I can not. Some help?
Click to expand...
Click to collapse
If you have your device rooted you can download rashr from the play store and flash the recovery.img from there
moto999999 said:
If you have your device rooted you can download rashr from the play store and flash the recovery.img from there
Click to expand...
Click to collapse
Unfortunately he is not. I solve the problem with unrecognized device, but it always come back. In this post: https://forum.xda-developers.com/le-max-2/development/recovery-twrp-3-0-2-0-unofficial-t3443611
The author says: "OTG is working for some people but not for others also some readers and flash drives are not being seen. Will look into fixing it."
This is kinda my problem. For now i'm using 19s indian stock
Do you immediatly reboot into recovery after flashing TWRP? If not, the Stock Recovery will be restored and twrp is getting deleted again.
if you type "fastboot reboot" just hold the "volume up" key at this moment until you're in twrp...
Antisound said:
Do you immediatly reboot into recovery after flashing TWRP? If not, the Stock Recovery will be restored and twrp is getting deleted again.
if you type "fastboot reboot" just hold the "volume up" key at this moment until you're in twrp...
Click to expand...
Click to collapse
Yes, I did it. But a blue screen appear fast and my smartphone turns off. It does not go into recovery at all, only after I start the phone normally. Funny that I only get message of success since the release of the bootloader until the installation of twrp.
Have you tried "fastboot boot <recovery.img>"?
sudloa said:
Have you tried "fastboot boot <recovery.img>"?
Click to expand...
Click to collapse
I forget to mention. After the "successful" twrp install, the device is not recognized. What I mean: "List of devices attached" is blank. So I can't use this command.
lucasnoman said:
I forget to mention. After the "successful" twrp install, the device is not recognized. What I mean: "List of devices attached" is blank. So I can't use this command.
Click to expand...
Click to collapse
fastboot could use in fastboot mode (shutdown then vol down + power) only and windows sohuld recognize this.
But I think your adb usb driver got conflict somehow.
You can try "usbdeview" to uninstall all adb usb drivers then use some knid of universal adb usb driver installer.
Antisound said:
Do you immediatly reboot into recovery after flashing TWRP? If not, the Stock Recovery will be restored and twrp is getting deleted again.
if you type "fastboot reboot" just hold the "volume up" key at this moment until you're in twrp...
Click to expand...
Click to collapse
This is the key part I have missed as well !!!!!!!!!!!!!!!!!!!!!!!!!!!!
Along with the AT USB unlock code (Dial *#*#76937#*#*) to allow ADB
Thank you :laugh:
---------- Post added at 11:45 PM ---------- Previous post was at 11:40 PM ----------
lucasnoman said:
Unfortunately he is not. I solve the problem with unrecognized device, but it always come back. In this post: https://forum.xda-developers.com/le-max-2/development/recovery-twrp-3-0-2-0-unofficial-t3443611
The author says: "OTG is working for some people but not for others also some readers and flash drives are not being seen. Will look into fixing it."
This is kinda my problem. For now i'm using 19s indian stock
Click to expand...
Click to collapse
Hi, You should TITLE your post Why does TWRP not stay resident ?
paulsnz2 said:
This is the key part I have missed as well !!!!!!!!!!!!!!!!!!!!!!!!!!!!
Along with the AT USB unlock code (Dial *#*#76937#*#*) to allow ADB
Thank you :laugh:
---------- Post added at 11:45 PM ---------- Previous post was at 11:40 PM ----------
Hi, You should TITLE your post Why does TWRP not stay resident ?
Click to expand...
Click to collapse
You're Welcome
Antisound said:
You're Welcome
Click to expand...
Click to collapse
I have the 820. Could NOT get windows to see this phone on stock rom. Don't recall exact steps I took, but I do remember the ADB feature within TWRP saved my day. Windows would see the phone in TWRP recovery adb mode, but could never get windows to adb connect with stock rom.
Hey people, sry I'm coming back now. Lightning struck my street and burned my pc. But I come back with another problem, when I connect my phone to the pc nothing happens. I mean, I can't transfer cause MTP doesn't work. I tried install unninstall and install again adb, and all the drivers but it did not work. So I'll need to fix this to try to install twrp again
Guys! I was being too stupid! I found my mistake... I was using another smartphone twrp... So, for who are having same issue, pay attention to this. But, thanks everybody and sry for this hahaha
SOME USERS CAN'T MAKE THIS GUIDE. PLEASE READ ALL POST BEFORE DO THIS GUIDE.
bibiii79 said:
Thanks a lot, worked perfectly !!!
:good:
Cheers!
Click to expand...
Click to collapse
muzzz33 said:
Many thanks , worked a charm , installed latest TWRP AND Magisk once unlocked . I thought this would be a night mare but no issues so far. I was on 7.1.1 2017G 1.20B08
Click to expand...
Click to collapse
bibiii79 said:
Thanks a lot, worked perfectly !!!
:good:
Cheers!
Click to expand...
Click to collapse
muzzz33 said:
Many thanks , worked a charm , installed latest TWRP AND Magisk once unlocked . I thought this would be a night mare but no issues so far. I was on 7.1.1 2017G 1.20B08
Click to expand...
Click to collapse
emanulian said:
How?
I can´t do it (anything).
---------- Post added at 01:24 PM ---------- Previous post was at 01:17 PM ----------
This help me:
"10- You'll boot in TWRP once there do the following :
Code:
* tap CANCEL
* tap WIPE
* tap FORMAT DATA and Follow the Instructions"
Thank you.
Click to expand...
Click to collapse
atakan33 said:
i try on nougat B08 also B09 works too
Click to expand...
Click to collapse
bersek71 said:
thanks! It's OK with nougat!
Click to expand...
Click to collapse
Martinius79 said:
Thanks!
This method worked for me on a A2017G running stock B08 (Nougat) with locked bootloader.
Build number: ZTE A2017GV1.2.0B08
Only difference was between step 10 and 11. The device was encrypted so I ended up in the "enter password" dialog after flashing, reset and reboot from edl (because of verity break I guess).
I had to force the device manually into the bootloader (switch off and then hold Volume-Up and Power button to get into the recovery and then to the bootloader).
BTW: Flashed TWRP 3.2.1.0 directly after first boot with axon7tool and then installed Magisk 15.3. Magisk seems to work pretty well for me with this device, root/SU support is working and SafetyNet Patch is also fine.
Thanks for the guide and the links again!
Bye
Martinius
Click to expand...
Click to collapse
[GUIDE]Unlock Bootloader Easily
Hi all. I will present new and easier method to unlock bootloader. This guide works on all models.
Before begin;
- Be sure backed up your stuffs on internal storage.
- Be sure that using x64 Windows.
- Be sure that your battery is over 50%
- Be sure that Disable Driver Signature Verification
Download:
MiFlash 20160401 https://drive.google.com/file/d/0B065LdNGqJLGM2xfSkZMbVYwc3M/view
15 second ADB Installer https://forum.xda-developers.com/showthread.php?t=2588979
ZTE Axon 7 USB Drivers https://androidfilehost.com/?fid=889964283620763004
ZTE Axon 7 Bootloader Unlock Images by TurkDevs https://androidfilehost.com/?fid=817906626617943545
Unlock Bootloader:
1. Install MiFlash. Driver installation will be done automatically.
2. Install ADB Installer. Press Y for all steps on installation.
3. Install Axon 7 Driver.
4. Turn on from developer options "USB Debugging" and "Unlock OEM".
5. Enter; "adb reboot edl"
6. Go Device Manager of Windows and be sure you see your device as "Quallcomm HS-USB QDLoader 9008".
7. Extract ZTE_AXON_7_BOOTLOADER_UNLOCK_IMAGES_BY_TURKDEVS.zip
8. Go MiFlash and Refresh. Your device will be there. Select from top Unlock Images folder which you've extracted.
9. Flash and wait until it is done.
10. Long press power button and let your device is on.
11. Enter "adb reboot bootloader" after your device is on.
12. Enter "fastboot oem unlock-go" when you are on bootloader interface.
13. Your data will be erased on this step and device will boot with unlock bootloader.
This tool is from forum.turkdevs.com
Orginal thread: https://forum.turkdevs.com/konu/zte-axon-7-bootloader-acma-root-ve-twrp-yukleme.12225
Hit thanks button if I help you.
Isn't this the same exact method just with a different file?
is this method working 7.1.1 stock ?
atakan33 said:
is this method working 7.1.1 stock ?
Click to expand...
Click to collapse
Yes it works
and how to flash twrp easily?
Is there a zip to relock the device on an Easy way like this?
Lycidias said:
Is there a zip to relock the device on an Easy way like this?
Click to expand...
Click to collapse
actually to relock you should flash a FULL_EDL package through MiFlash, then flash fastboot, maybe with the package on this thread, and then relock. But check if I'm right cause I've never done that
Lycidias said:
Is there a zip to relock the device on an Easy way like this?
Click to expand...
Click to collapse
Yes there is. Check first message https://forum.turkdevs.com/konu/zte-axon-7-bootloader-acma-root-ve-twrp-yukleme.12225/
what about twrp ?
is this working on my A2017G unlocked bootloader ?
atakan33 said:
is this working on my A2017G unlocked bootloader ?
Click to expand...
Click to collapse
it should.
I follow yours steps, All was donde fine, but now, to start it ask me for password!!! What is it?!?!
emanulian said:
I follow yours steps, All was donde fine, but now, to start it ask me for password!!! What is it?!?!
Click to expand...
Click to collapse
You should format data
How?
I can´t do it (anything).
---------- Post added at 01:24 PM ---------- Previous post was at 01:17 PM ----------
This help me:
"10- You'll boot in TWRP once there do the following :
Code:
* tap CANCEL
* tap WIPE
* tap FORMAT DATA and Follow the Instructions"
Thank you.
When I put "adb reboot edl" in the Commend Prompt, it came up the device cannot found. Where did I do wrong? Thanks.
jjremax said:
When I put "adb reboot edl" in the Commend Prompt, it came up the device cannot found. Where did I do wrong? Thanks.
Click to expand...
Click to collapse
Like, on the start? Look you need to enable USB debugging and keep the phone on and unlocked. Issue 'adb devices' and a pop-up should appear on the phone. Allow the connection and then try 'adb reboot edl'
The phone will seem like it's completely off but it will be in EDL mode
Choose an username... said:
Like, on the start? Look you need to enable USB debugging and keep the phone on and unlocked. Issue 'adb devices' and a pop-up should appear on the phone. Allow the connection and then try 'adb reboot edl'
The phone will seem like it's completely off but it will be in EDL mode
Click to expand...
Click to collapse
Actually, I enabled USB debugging and kept the phone on. I don't understand the meaning of keeping it unlocked, which I thought that was what I am trying to do.
Another question is whether I should download those files into my computer or into the phone. I downloaded them into my PC.
Unlock Bootloader Easily
jjremax said:
Actually, I enabled USB debugging and kept the phone on. I don't understand the meaning of keeping it unlocked, which I thought that was what I am trying to do.
Another question is whether I should download those files into my computer or into the phone. I downloaded them into my PC.
Click to expand...
Click to collapse
I re-did the whole process and finished the step 9 (Flash and wait until it is done). However, the device won't be on after long press the power button as indicated in Step 10. What should I do now?
jjremax said:
I re-did the whole process and finished the step 9 (Flash and wait until it is done). However, the device won't be on after long press the power button as indicated in Step 10. What should I do now?
Click to expand...
Click to collapse
Make it a really long press. Like a couple of minutes long. After that release it and hold it again, it should boot up
What I meant with 'keep it unlocked' was that you had to leave it with the screen on, not locked.
Unlock Bootloader Easily
Choose an username... said:
Make it a really long press. Like a couple of minutes long. After that release it and hold it again, it should boot up
What I meant with 'keep it unlocked' was that you had to leave it with the screen on, not locked.
Click to expand...
Click to collapse
Thanks for the info. I have long pressed the power button more than 4 minutes, but it still won't power up. I saw the LED light up very shortly and felt the phone motor vibrated little bit (You normal can feel the vibration very strong before I did such unlock bootloader thing when the phone powers on). Also, it would repeate such LED and little motor vibration if I hold the power button long enough. How should I do? Thanks again.
Hi !
I've attempted to deal with the devil by trying to root my Pioneer XDP-300R resulting in a bootloop problem (device is stuck on "Powered by Android" screen).
I attempted to flash a boot.img for a Onkyo DX-P1 (which is the same firmware), and still I haven't progressed.
No firmware, update or imgs are provided on Pioneer's website.
I still have access to fastboot (OEM is LOCKED, so I can't boot TWRP and such) in bootloader mode and adb push (no shell) in recovery mode.
Do you guys have any idea how to sort it out ?
Edit :
I managed to make my device go into Qualcomm's emergency download mode.
Here's how to :
1 - Make sure the device is completely off and unplugged from USB.
2 - Install QPST V2.7.474 (not enough posts to share url, but I can PM it).
3 - Install QDLoader Drivers (same as #2).
4 - Simply press and hold the "Play" button while connecting it to your computer, the device manager should see a "Qualcomm 9008 port" listed in Ports while the player's screen stays black.
5 - Do the Carlton (important step !)
Now, if anyone possessing a FUNCTIONAL AND ROOTED Pioneer XDP-300r is reading this and willing to help, can you get in touch with me ?
Together, we could manage to save all the other devices from soft-bricking.
All I would need from you is some time, hard disk space and patience to sort it out.
Please <insert_your_name_here>, you're my only hope !
Edit #2 :
Thanks to minotauri's great help, we managed to get a FULL rom backup, split the partitions to files and generate all the files needed for QFIL.
ErrOzz has been given access to this, hoping that he'll try it out soon.
If that works, I'll link you the files and write the walkthrough to bring you DAP back to life.
minotauri's contributions are not in rest tho, he managed to also successfuly patch TWRP for the device, so anyone can securely flash things from there now.
For anyone reading this thread : you're not the only one who screwed things up, we did too but we might have the cure. Hang in there !
grogcw said:
Hi !
I've attempted to deal with the devil by trying to root my Pioneer XDP-300R resulting in a bootloop problem (device is stuck on "Powered by Android" screen).
I attempted to flash a boot.img for a Onkyo DX-P1 (which is the same firmware), and still I haven't progressed.
No firmware, update or imgs are provided on Pioneer's website.
I still have access to fastboot (OEM is LOCKED, so I can't boot TWRP and such) in bootloader mode and adb push (no shell) in recovery mode.
Do you guys have any idea how to sort it out ?
Edit :
I managed to make my device go into Qualcomm's emergency download mode.
Here's how to :
1 - Make sure the device is completely off and unplugged from USB.
2 - Install QPST V2.7.474 (not enough posts to share url, but I can PM it).
3 - Install QDLoader Drivers (same as #2).
4 - Simply press and hold the "Play" button while connecting it to your computer, the device manager should see a "Qualcomm 9008 port" listed in Ports while the player's screen stays black.
5 - Do the Carlton (important step !)
Now, if anyone possessing a FUNCTIONAL AND ROOTED Pioneer XDP-300r is reading this and willing to help, can you get in touch with me ?
Together, we could manage to save all the other devices from soft-bricking.
All I would need from you is some time, hard disk space and patience to sort it out.
Please <insert_your_name_here>, you're my only hope !
Click to expand...
Click to collapse
Hi - I saw your post on Head-Fi (antdroid over there). Let me look into this!
Here is a bunch of system dump images and qcn files: https://drive.google.com/drive/folders/1diqQ8LE-yG4b-WZFB_OPcQp2rDUp9BbV?usp=drive_open
Hello.
How can I write boot from qdload 9008 state?
Hi !
From the edl / qdload 9008 state, you can't afaik.
Here's how I think you can :
1 - Unplug your device from USB and power it off from whatever state it is.
2 - Power it on pressing Power + Previous button (keep holding, you should be "stuck" on the penguin logo).
3 - Connect your USB.
4 - Check that you have a Android ADB Device in your device manager (install drivers manually if you have an Unknown device).
5 - Grab any fastboot from the internet if you don't already have it (I'll PM you my gdrive, it's there for exemple).
6 - From CMD, go to fastboot directory. (cd <my_folder_with_fastboot>).
7 - Type in : fastboot devices
If fastboot sees your device, you're on the good path, else, check your driver / connection / reboot to fastboot "penguin" state.
8 - Type in : fastboot oem device-info
If it replies
(bootloader) Device unlocked: true
among others, you're in a good, good way, else, you're screwed by now, but we are working on it.
9 - If all the precedent are fulfilled type :
fastboot flash boot <my_boot_image.img>
10 - Mandatory Carlton.
I hope you'll be in the right path all the way, if you're stuck somewhere or if your bootloader is locked, please let me know.
Cheers !
ErrOzz said:
Hello.
How can I write boot from qdload 9008 state?
Click to expand...
Click to collapse
I was successful in creating a recovery (twrp) for this device.
https://www.antdroid.net/2019/02/pioneer-xdp-300r-root-twrp-recovery.html?m=1
also created a XDA thread here: https://forum.xda-developers.com/android/development/pioneer-xdp-300r-digital-audio-player-t3902949
Feel free to PM me if you have questions or we can work it through here
Hi,
I have the same problem. I am able to get qdload 9008 state from here now. However, after unplug and followed grogcw's hints, the device is not recognized again. Also, the device hasn't ennobled debug mode before too. All the adb and fastboot commands return no device.
Hopefully can get more help here.
---------- Post added 28th February 2019 at 12:16 AM ---------- Previous post was 27th February 2019 at 11:58 PM ----------
minotauri said:
I was successful in creating a recovery (twrp) for this device.
https://www.antdroid.net/2019/02/pioneer-xdp-300r-root-twrp-recovery.html?m=1
also created a XDA thread here: https://forum.xda-developers.com/android/development/pioneer-xdp-300r-digital-audio-player-t3902949
Feel free to PM me if you have questions or we can work it through here
Click to expand...
Click to collapse
Is there anyway to flash TWRP and so with QDLoader?
I believe he is on vacation for another week and half. If you haven't enabled the bootloader unlock option within Android, then my recovery method may not work since it may not let you flash the recovery.
You can try to fastboot boot recovery.img though
Hi ! I'm back from vacation, but I still haven't my device around.
Any user willing to test are welcome to reply or PM me !
Let's have all the bricked units working, shall we
grogcw said:
Hi ! I'm back from vacation, but I still haven't my device around.
Any user willing to test are welcome to reply or PM me !
Let's have all the bricked units working, shall we
Click to expand...
Click to collapse
How can we get started?
We actually did start probing stuff around, and we are missing something in the "full restoration process", so we're stuck for now.
Sahara protocol still is a mystery for us, and we can't get pass an error.
I think we don't actually have the right programmer_firehose.mbn for our device, but if it's not this, I'm basically out of ideas. (we might need an "QFIL expert" on this)
I still don't have my device around and feeling dumb about this.
Anyway, all the files and tools required to try probing around are in my gdrive and I can PM the link (as I still can't post it right away) if anyone is interested.
Thanks for trying to help or actually help everyone !
Cheers !
Hello,
I try to root my xdp-300r,after reboot have bootloop result.
I don't know how to reflash systme.img.
can suggest any repair plan,thank you~
Was able to unbrick device. Here are the steps TO DO IT
grogcw said:
hi !
I've attempted to deal with the devil by trying to root my pioneer xdp-300r resulting in a bootloop problem (device is stuck on "powered by android" screen).
I attempted to flash a boot.img for a onkyo dx-p1 (which is the same firmware), and still i haven't progressed.
No firmware, update or imgs are provided on pioneer's website.
I still have access to fastboot (oem is locked, so i can't boot twrp and such) in bootloader mode and adb push (no shell) in recovery mode.
Do you guys have any idea how to sort it out ?
edit :
i managed to make my device go into qualcomm's emergency download mode.
Here's how to :
1 - make sure the device is completely off and unplugged from usb.
2 - install qpst v2.7.474 (not enough posts to share url, but i can pm it).
3 - install qdloader drivers (same as #2).
4 - simply press and hold the "play" button while connecting it to your computer, the device manager should see a "qualcomm 9008 port" listed in ports while the player's screen stays black.
5 - do the carlton (important step !)
now, if anyone possessing a functional and rooted pioneer xdp-300r is reading this and willing to help, can you get in touch with me ?
Together, we could manage to save all the other devices from soft-bricking.
All i would need from you is some time, hard disk space and patience to sort it out.
please <insert_your_name_here>, you're my only hope !
edit #2 :
thanks to minotauri's great help, we managed to get a full rom backup, split the partitions to files and generate all the files needed for qfil.
Errozz has been given access to this, hoping that he'll try it out soon.
If that works, i'll link you the files and write the walkthrough to bring you dap back to life.
Minotauri's contributions are not in rest tho, he managed to also successfuly patch twrp for the device, so anyone can securely flash things from there now.
For anyone reading this thread : You're not the only one who screwed things up, we did too but we might have the cure. Hang in there !
Click to expand...
Click to collapse
i was able to unbrick my device
dantuko said:
all credits go to anthony nguyen aka minotauri. Thank you!
requirements:
samsung drivers installed
windows 10 (i have the windows 10 pro installed)
oem unlock
usb debbuging selected prior to brick
install the latest samsung drivers
install fastboot/adb drivers
stock-boot.img provided by minotauri
the steps are as follows:
the device must be in recovery mode an plugged to the computer. I was on stock recovery
open device manager in windows, look for anything android and delete it and choose to delete the drivers
refresh device manager for new devices (keep only the xdp-300 android connected)
right click on the android device and click on update drivers
select browse my computer for driver software
click on let me pick from a list of available drivers
unselect show compatible drivers (if you see a samsumg driver here, select it. If not try generic windows adb drivers)
seletct google adb drivers (this is the one that worked and it's under samsung drivers)
i performed the steps 1 through 8 a few times until the computer categorized the device as adb
open a command prompt, navigate to the directory where fastboot is installed and type: Fastboot devices (you should have a device listed here)
type: Fastboot oem unlock (this unlocks the bootloader)
after copying stock-boot.img to the root of the your fastboot directory, type: Fastboot flash boot stock-boot.img (reboot)
after the reboot you should see normal boot
if you want twrp and root follow the instructions here: https://forum.xda-developers.com/android/development/pioneer-xdp-300r-digital-audio-player-t3902949 all credits go to anthony nguyen.
i installed twrp the latest supersu pro, viper4android, root browser, busy box pro and everything works perfectly.
:fingers-crossed::fingers-crossed::fingers-crossed:good luck to you e n j o y ! ! !:fingers-crossed::fingers-crossed::fingers-crossed:
i am not an android programmer so i won't be able to help you from that perspective, but i a software engineer so i maybe able to answer some questions.
There is no guarantee this method will work for you but it did work for me
I can provide a TWRP backup file for you to restore your device
Click to expand...
Click to collapse
I have a rooted xdp300r rooted
ralf05 said:
Hello,
I try to root my xdp-300r,after reboot have bootloop result.
I don't know how to reflash systme.img.
can suggest any repair plan,thank you~
Click to expand...
Click to collapse
It was bricked and I was able to fix it and root it
Help !!!
Hello
Gentlemen, help me! I've broken my device
I hit the whole system on my xdp300r. What can I do in this case ??? Only I can turn on TWRP and nothing more.
[email protected]
---------- Post added at 05:55 PM ---------- Previous post was at 05:51 PM ----------
dantuko said:
i was able to unbrick my device
Click to expand...
Click to collapse
Help !!!
dantuko said:
i was able to unbrick my device
Click to expand...
Click to collapse
Hello
Could I ask you for a backup file? Unfortunately, I lost the systemThank you very much.
Greetings.
[email protected]
stefan999 said:
Hello
Could I ask you for a backup file? Unfortunately, I lost the systemThank you very much.
Greetings.
[email protected]
Click to expand...
Click to collapse
I UPLOADED THE BACKUP FILE TO MY GOOGLE DRIVE
https://drive.google.com/drive/folders/1vM7Z12w3CsbutSr54lY4tTdzyN1jurpp?usp=sharing
dantuko said:
I UPLOADED THE BACKUP FILE TO MY GOOGLE DRIVE
https://drive.google.com/drive/folders/1vM7Z12w3CsbutSr54lY4tTdzyN1jurpp?usp=sharing
Click to expand...
Click to collapse
Here is a few items to note about the image:
You must have twrp installed and accessible in order to restore this image.
First time booting after the restore will take a long time, so have a cup of coffee and let it do it's thing.
Every time you boot the OS will perform application optimization, it doesn't bother me so I have not even looked into it.
After you boot connect to your WIFI and open Google Play to set up your account
If you want to use Viper4Android, download and install busybox, then open settings, go to apps and disable Musicfx, then reboot and turn Viper4Android on.
Good luck
dantuko said:
Here is a few items to note about the image:
You must have twrp installed and accessible in order to restore this image.
First time booting after the restore will take a long time, so have a cup of coffee and let it do it's thing.
Every time you boot the OS will perform application optimization, it doesn't bother me so I have not even looked into it.
After you boot connect to your WIFI and open Google Play to set up your account
If you want to use Viper4Android, download and install busybox, then open settings, go to apps and disable Musicfx, then reboot and turn Viper4Android on.
Good luck
Click to expand...
Click to collapse
Thanks for answer and sharing your files. Unfortunately, there is some error when trying to restore in TWRP.
I packed all the items from your disk in ZIP and downloaded to the SD card .
I'm getting an error about the content: no MD5 file found Failed to map file'/external_sdxxxxxx-Full BACKUP.zip'
Error instaling zip file
. Do you have an idea why this is happening?
twrp settings
stefan999 said:
Thanks for answer and sharing your files. Unfortunately, there is some error when trying to restore in TWRP.
I packed all the items from your disk in ZIP and downloaded to the SD card .
I'm getting an error about the content: no MD5 file found Failed to map file'/external_sdxxxxxx-Full BACKUP.zip'
Error instaling zip file
. Do you have an idea why this is happening?
Click to expand...
Click to collapse
You need to change settings in twrp not to check md5 checksum, if it doesn't work then i'll create one with checksum.