Hi guys, I bricked my RN3 (Snapdragon) today after flashing an incompatible file (probably), now it doesn't switch on nor go to the bootloader. Just the LED blinks red on connecting USB which means it is on EDL mode (right?) So, I've searched and found similar problems with recommendations of the tespoint method and the deep flash cable. But the problem is everyone sees that PC detects as a Qualcomm device either in Diagnostics mode or the other but mine shows up "Unknown USB device". What can I do from here? Please help
PS: I'm on Windows and driver signature is disabled only.
Reinstall drivers, try different pc
Related
Hi everyone,
I tried flashing a new rom on my Goophone N3+ (i think it's a MTK6592), but something went terribly wrong and now the phone doesn't boot.
I can't even access the recovery mode or the download mode: the phone just won't turn on.
I tried connecting it to different computers with different cables, but it's always recognized as an "unknown device".
Is there a way to unbrick it, or at least make my pc recognize it?
Thank you in advance and sorry for my poor english.
Remove battery, plug phone on USB and check for COM port in device manager.
If there is a COM port for only 2 seconds, there is unbrick possible.
Hey guys. I have kenzo on the latest stable rom and USB doesnt seem to be working. When I connect to my pc (WINDOWS 10 32-BIT) the phone charges but nothing else happens. There is no option to change to mtp mode on phone AND nothing shows up on my PC and nothing on device manager
How do I fix this because I want to unlock my bootloader in the future and if the PC cant detect my phone then I'm screwed. Thanks so much in advance
and yes, the mi flash tool, adb drivers, you call it, all is installed
Is your problem solved???
Is yes please tell me what you did.
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
muki22 said:
Hey, I got wiko ridge 4g that was bricked, it won't turn on but the light is blinking when battery is not full when i connect him on charger. I have connected the phone with PC via USB and he recognized him as 'qhsusb_bulk', i tried to unbricked it with SRK Tool 2.0, but i can't turn on usb debbuging and i don't know if the phone is rooted or not, but i did it anyway. So i managed to delete partitions with that program, but later the phone was recognized as Unknown USB Device. So my question is : is there any other way to brick the phone back, without phone being turned on, via PC ?
Thank you very much.
Click to expand...
Click to collapse
Hm, nobody answered to this ,so i keep digging out on internet,and after some searching i use the qfil app, also i downloaded original stock rom for my wiko ridge 4g, through qfil i installed that rom , the pc in one point recognized my device as 4g ridge, but then just started to showing quallcomm hs-usb diagnostic mode 9092 when it connected to PC via USB. My phone show some signs ,screen was black but it vibrating, and a assume it's turned on when i press touch screen or volume changer button he reproducing sound, but on pc he is readed like quallcomm hs-usb diagnostic mode 9092! If somebody know how to fix that problem, please answer me!
My vivo Y55L was stuck in a boot loop and did not go ahead of the vivo screen.
I tried flashing the stock ROM through QFIL but it gave me a EDL Firehouse error and the flash was unsuccessful. I disconnected the phone to reconnect but to my misery the phone does not connect to QFIL anymore. When i press the power up and down button and connect the USB the computer gave me an error USB device not recognised and may have malfunctioned. if I power up the phone now it doesn't start and goes back into the bootloop for 2-3 times before switching off. I have tried reconnecting the USB and reinstalling ADB drivers and Qualcomm drivers. But still the same error, Device receptor not recognized and USB device not recognized may have malfunctioned. Any solutions will be appreciated
Hello,
I am left with a OPX with no ROM, and no bootloader (after trying to upgrade TWRP). It shows the Oneplus icon, and Fastboot mode works.
I'm trying to access the device through adb or fastboot, but my computers can't detect nothing.
I installed Qualcomm drivers, ADB & Fastboot, Oneplus USB drivers. I tried to connect my OPX with Fastboot, and with "volume up" plugging (as shown in the mega unbrick guide), nothing shows up in the device manager.
What can I do ?
Thank you very much.
NOTE : I was not in developer mode on the last ROM installed ...
Since fastboot works it seems that your PC or maybe the conection might be the problem here.
Have you tried different cables, USB ports, different computers or different Operating Systems?
Could your MicroUSB Port be broken?
( You could give Ubuntu a shot. It might take a little time to install, but it's free and if you can save your phone with it it could be worth the time. You can also unbrick your device under Linux once you successfully connect it in EDL mode. )