Related
hello last week I installed this rom http://forum.xda-developers.com/showthread.php?t=1444858 and it was fine...then I want to get back to stock rom and I instaled fw .58...then update notification comes up to fw .62...I accepted that update and my device should reebot...but it didn't...I think that he is bricked...then I try to flash that custom rom via flashtool and phone connect automatic in flash mode without pressing volume down+power button...when I try to turn on the phone green led blink...when I put phone on charger green led light still blink...any ideas how to unbrick?
sorry for my bad english
You had unlocked bootloader.
Check my tutorial, link in signature.
Also, flashmode is turn off phone, hold down volume down button and connect USB cable.
Sent from my Xperia Live using xda premium
I don't have unlocked bootloader
I took this picture before installing a custom rom in a case of failrue
ur bootloader unlock is not allowed !! ? ... try this remove ur battery once .. and then enter into flashmode......
believe me I tried everything...yesterday I took the cell phone warranty and I hope that they will fix it...
today my phone come back from service and they didn't fix him...it's over
live with walkman was my first android phone
Domac5 said:
today my phone come back from service and they didn't fix him...it's over
live with walkman was my first android phone
Click to expand...
Click to collapse
Still no access to flashmode? Make sure phone is turned off, hold down Volume DOWN button and then connect USB cable. Nothing more, nothing less.
it works
i flashed Xperia 2011 Range_FreeXperia_ALL.ftf and my phone works...thank god
Domac5 said:
it works
i flashed Xperia 2011 Range_FreeXperia_ALL.ftf and my phone works...thank god
Click to expand...
Click to collapse
oh, good.
it's disappointing to know the service center didn't fix your phone. i guess warranty is just good for factory defects.
exactly ...if its a software fault we are better off solving it on our own from xda than service center...... they r only good for hardware faults..... and most of them are not covered in warranty i think
but they took my warranty papers and cancel guarantee...what a bastards
i am using now this rom http://forum.xda-developers.com/showthread.php?t=1444858
it's hard to find rom which requires no unlocked bootloader and custom kernel
Domac5 said:
hello last week I installed this rom http://forum.xda-developers.com/showthread.php?t=1444858 and it was fine...then I want to get back to stock rom and I instaled fw .58...then update notification comes up to fw .62...I accepted that update and my device should reebot...but it didn't...I think that he is bricked...then I try to flash that custom rom via flashtool and phone connect automatic in flash mode without pressing volume down+power button...when I try to turn on the phone green led blink...when I put phone on charger green led light still blink...any ideas how to unbrick?
sorry for my bad english
Click to expand...
Click to collapse
if guys still on issues one and only best idea to overcome the problem is to relock the bootloader. it can be flashed using flashtool like we do for .tft files or sin files. try it out it really worked for those regreting OTA updates.
Sorry u are stuck
Domac5 said:
hello last week I installed this rom http://forum.xda-developers.com/showthread.php?t=1444858 and it was fine...then I want to get back to stock rom and I instaled fw .58...then update notification comes up to fw .62...I accepted that update and my device should reebot...but it didn't...I think that he is bricked...then I try to flash that custom rom via flashtool and phone connect automatic in flash mode without pressing volume down+power button...when I try to turn on the phone green led blink...when I put phone on charger green led light still blink...any ideas how to unbrick?
sorry for my bad english
Click to expand...
Click to collapse
Ur phone cannot be used with custom roms.
just install The default .58 firmware root if u need and update to .62 (do as intructed on this post linked below)
link - http://forum.xda-developers.com/showthread.php?t=1559685
Say thank if i helped u
LIVE with walkman
Domac5 said:
it works
i flashed Xperia 2011 Range_FreeXperia_ALL.ftf and my phone works...thank god
Click to expand...
Click to collapse
hi
i am facing the same problem like yours, i flashed my mobile with a LWW FTF file using a flash tool.
now , if i switch ON the mobile green notification light will blink slightly and there is no response, i tried CWM using coconut, SEUS, different LWW kernels, given to service centers etc but still have the same problem.i unlocked the phone officially while the phone with this problem.
pls reply me how you rectified your problem.
Domac5 said:
but they took my warranty papers and cancel guarantee...what a bastards
Click to expand...
Click to collapse
WTF really ... Now that cruel they cannot cancel your warranty mahn..
I got the same problem
Domac5 said:
it works
i flashed Xperia 2011 Range_FreeXperia_ALL.ftf and my phone works...thank god
Click to expand...
Click to collapse
hello,
hi i got the same issue. when connected my phone to PC green led is keeping on (not blinking). and when i connected to charger or pressing the power button green led is blinking and the device is totally turned off. so i have reed this post. so can you please tell me what tool you have used to flash the Xperia 2011 Range_FreeXperia_ALL.ftf firmware and how did u installed that can you please send me a tutorial about it. i am really eager to see it working...please help me bro.....
Thank you,
Naga
I bought a couple of faulty phones off eBay with the hope of fixing them.
I have an Xperia Ray st18a that gets stuck on the Sony boot screen.
I can go into flash mode and tried updating. it appeared to go ok, no errors, but still stuck on boot logo.
I can't get into fastboot. The LED turns green and a battery icon appears on the screen for a moment. The only device that shows up in device manager at this point is a drive. I tried updating the driver to the one provided on the various fastboot threads here, but it says it's not for this device.
I suspect it's not getting into fastboot mode.
I've tried flashing stock roms using flashtool and they seem to flash ok, but still get stuck on boot logo.
Any ideas of what I can try?
the_scotsman said:
I bought a couple of faulty phones off eBay with the hope of fixing them.
I have an Xperia Ray st18a that gets stuck on the Sony boot screen.
I can go into flash mode and tried updating. it appeared to go ok, no errors, but still stuck on boot logo.
I can't get into fastboot. The LED turns green and a battery icon appears on the screen for a moment. The only device that shows up in device manager at this point is a drive. I tried updating the driver to the one provided on the various fastboot threads here, but it says it's not for this device.
I suspect it's not getting into fastboot mode.
I've tried flashing stock roms using flashtool and they seem to flash ok, but still get stuck on boot logo.
Any ideas of what I can try?
Click to expand...
Click to collapse
But you are sure you installed drivers from flashtool folder -> drivers ? Cause normally it should work. Or the bootloader is locked and it's another problem...
To get fastboot working you must have sdk tools and here is the modified android_winusb file, that xperia devices are supported by fastboot. Maybe look there
Yea, done all that. It looks like this one has a locked bootloader and is SIM locked, so fastboot is disabled. So there's no way for me to get to fastboot as I can't get past the boot screen
the_scotsman said:
Yea, done all that. It looks like this one has a locked bootloader and is SIM locked, so fastboot is disabled. So there's no way for me to get to fastboot as I can't get past the boot screen
Click to expand...
Click to collapse
Maybe you could try here Turning the brick into a smartphone.
But if it boots up until the screen appears it shouldn't b bricked...
Yea thanks. I can get into flash mode and I am able to successfully flash different firmware, but no matter which one I try, it just stops on the boot screen
the_scotsman said:
Yea thanks. I can get into flash mode and I am able to successfully flash different firmware, but no matter which one I try, it just stops on the boot screen
Click to expand...
Click to collapse
What about repairing using sony ericsson update service? Maybe you can repair it like this. Or it could brick 50/50
Tried the SE update tool too. It installs firmware ok, but then still gets stuck on boot screen....
the_scotsman said:
Tried the SE update tool too. It installs firmware ok, but then still gets stuck on boot screen....
Click to expand...
Click to collapse
And PC Companion repair options don't work, too?
mihahn said:
And PC Companion repair options don't work, too?
Click to expand...
Click to collapse
Hmmm....don't think I've tried that. isn't it the same as the SE update tool?
If not, I'll give it a try.
the_scotsman said:
Hmmm....don't think I've tried that. isn't it the same as the SE update tool?
If not, I'll give it a try.
Click to expand...
Click to collapse
I don't know excactly, but pc companion -> support zone -> I don't know. There is an option for repairing, don't know what it does, maybe give it a shot
But I think it'll just reinstall the stock rom again, cause you start with your phone plugged off and then you have to plug it in in flashmode, so I think it's like flashtool...
Just tried PC Companion. It updated the firmware no problem, but still getting stuck on boot screen
scotsman, are you able to boot? are still stuck at boot screen??? im having same issue too... tried flash kernel, rom... non works... (
clustered said:
scotsman, are you able to boot? are still stuck at boot screen??? im having same issue too... tried flash kernel, rom... non works... (
Click to expand...
Click to collapse
Sorry, I ended up selling the phone as it was bricked and unable to be revived.
I have the same problem. I'm a noob, so please bear with me =). I was able to root the st18. It came with a gingerbread. I wanted to try and upgrade it so I flashed ST18i_4.0.4_T.ftf, got stuck on the start screen. It showed the new Sony logo then the sony ericsson logo then loops. I can go to recovery, however I'm stuck (yes, noob me). I have another st18 - can I use it to fix the other? If any can direct me how to fix it, I will be eternally grateful. =)
Bowie0_o said:
I have the same problem. I'm a noob, so please bear with me =). I was able to root the st18. It came with a gingerbread. I wanted to try and upgrade it so I flashed ST18i_4.0.4_T.ftf, got stuck on the start screen. It showed the new Sony logo then the sony ericsson logo then loops. I can go to recovery, however I'm stuck (yes, noob me). I have another st18 - can I use it to fix the other? If any can direct me how to fix it, I will be eternally grateful. =)
Click to expand...
Click to collapse
Have you tried to flash the gingerbread ftf for your phone?
mihahn said:
Have you tried to flash the gingerbread ftf for your phone?
Click to expand...
Click to collapse
I'm downloading it now. I'll post if it works. It took some time to find a gingerbread ftf, some I found can't be recognized by the flashtool. Hopefully, this one works. Thanks for the tip!
Bowie0_o said:
I'm downloading it now. I'll post if it works. It took some time to find a gingerbread ftf, some I found can't be recognized by the flashtool. Hopefully, this one works. Thanks for the tip!
Click to expand...
Click to collapse
It worked! I also found this thread http://forum.xda-developers.com/showthread.php?t=1492805 hope it helps. Cheers!
I got mine to boot in the end with..
boot_miui_rel3.img <-- kernel
then i pressed the volume button down on booting got into the recovery
then on my sd i had put. EmoTR_MIUI_PERT.zip
then wiped data with the recovery and installed the .zip file from sd card it all boots but now the screen does not work lol
one problem after another with this phone.
My xperia ray is not booting.
Its stucked on the sony ericsson logo.
Sent from my Micromax A110 using xda app-developers app
the_scotsman said:
Sorry, I ended up selling the phone as it was bricked and unable to be revived.
Click to expand...
Click to collapse
I have exactly the same problem with my once perfectly working st18i. it was uk orange branded, sim locked with a unlockable bootloader. I did a seus update as recommended by sony and it messed the phone up. I should have done it over the air only.
Any help or advice would be appreciated as the phone is mint and Id love to use it again.
HI i have installed the 2.3.5 ginger bread version in my x10 mini
i have booted it first time and little slow after it was struck
i have tried with restart by pressing top key after this
i am getting only sony erricson logo and it was automatically switched off and restarts it self
so i think it may struck some where, guys please help me
this is the url which i have tried to install
http://forum.xda-developers.com/showthread.php?t=1027224
sunilchalla said:
HI i have installed the 2.3.5 ginger bread version in my x10 mini
i have booted it first time and little slow after it was struck
i have tried with restart by pressing top key after this
i am getting only sony erricson logo and it was automatically switched off and restarts it self
so i think it may struck some where, guys please help me
this is the url which i have tried to install
http://forum.xda-developers.com/showthread.php?t=1027224
Click to expand...
Click to collapse
Do you get a red led before it restarts itself?
its ,probably problem with rom try reinstall it or install different one and check if problem still exist
SmG67 said:
Do you get a red led before it restarts itself?
Click to expand...
Click to collapse
no lights
SmG67 said:
Do you get a red led before it restarts itself?
Click to expand...
Click to collapse
Reply please my phone was dead since a day
sunilchalla said:
Reply please my phone was dead since a day
Click to expand...
Click to collapse
Try a repair with SEUS or PC Companion first to get you back on stock. If the phone works like that, it may have been a problem with the ROM. Maybe a corrupted download or something like that.
SmG67 said:
Do you get a red led before it restarts itself?
Click to expand...
Click to collapse
SmG67 said:
Try a repair with SEUS or PC Companion first to get you back on stock. If the phone works like that, it may have been a problem with the ROM. Maybe a corrupted download or something like that.
Click to expand...
Click to collapse
Thank you man really
i have used sony erricson update service tool it works for me.
i lost the data but i got my phone working back
thankyou 100 times
:victory:
sunilchalla said:
Thank you man really
i have used sony erricson update service tool it works for me.
i lost the data but i got my phone working back
thankyou 100 times
:victory:
Click to expand...
Click to collapse
If you made a backup before you flashed the custom ROM you can install xRecovery or CWM again and do an advanced restore and choose data to get your data back Making backups is always recommended ofcourse.
Hello guys,
Here is my problem : youtube.com/watch?v=lGRq5dkg4Ow
I tried several rom (aosp, official, hermes, french rom ...) it change nothing, I really believe that It don't come from a rom but from hardware or bios (?).
It's 65€ to send it back to China so I'll not do it (they are going to refund me 26€).
What should I do ? Someone had this problems ? Can I contact a phone repairer or can I fix it myself ?
Should I try to sell it ?
I need your help guys
Nobody with info or help/link/having the same issue ?
Attempt to calibrate the proximity sensor and light sensor ... maybe help...
Hello !
I tried to access the proximity sensor test from the "CIT(?)" by pressing multiple time on "Kernel version "(about phone->kernel) but nothing opened (it's telling me "Launching cit" but nothing happened) ... the menu opened on the phone of my brother tho.
( en.miui.com/thread-110628-1-1.html instruction from here)
Uhmi said:
Hello guys,
Here is my problem : youtube.com/watch?v=lGRq5dkg4Ow
I tried several rom (aosp, official, hermes, french rom ...) it change nothing, I really believe that It don't come from a rom but from hardware or bios (?).
It's 65€ to send it back to China so I'll not do it (they are going to refund me 26€).
What should I do ? Someone had this problems ? Can I contact a phone repairer or can I fix it myself ?
Should I try to sell it ?
I need your help guys
Click to expand...
Click to collapse
Why there's no lockscreen when you wake up? Does the screen light up when shows black(try to verify in dark room)?
When you reboot the device does the MI logo appear after the vibration or it delays like when waking up from standby?
i have this prob too, but only in miui 7 beta (5.9.xx)..
its gone when im using fasboot installation for installing miui 7 stable..
nasko_spasko said:
Why there's no lockscreen when you wake up?
Click to expand...
Click to collapse
I disabled the lockscreen because it was a nightmare to unlock it with the lockscreen on (going to sleep before i could use the phone...)
nasko_spasko said:
Does the screen light up when shows black(try to verify in dark room)?
Click to expand...
Click to collapse
The luminosity change if i'm in the dark or in the light, look like the sensor is working.
nasko_spasko said:
When you reboot the device does the MI logo appear after the vibration or it delays like when waking up from standby?
Click to expand...
Click to collapse
Yeah it appear as fast as any other redmi note 2 (i just tried now)
i have this prob too, but only in miui 7 beta (5.9.xx)..
its gone when im using fasboot installation for installing miui 7 stable..
Click to expand...
Click to collapse
Are you sure it was the same ? I tried already a stable version... hum
I tried with my girlfriend if she could call me and if I could answer it.
I tried with a bluetooth headphone (there is a button on it to answer call so I don't need to push the button on the screen).
As soon as I hear ring, I push the button, for me it stop ringing but my girlfriend have to wait for my screen to show up for the call to work properly. (If my screen si black, it's still ringing for her)
Uhmi said:
I disabled the lockscreen because it was a nightmare to unlock it with the lockscreen on (going to sleep before i could use the phone...)
The luminosity change if i'm in the dark or in the light, look like the sensor is working.
Yeah it appear as fast as any other redmi note 2 (i just tried now)
Are you sure it was the same ? I tried already a stable version... hum
I tried with my girlfriend if she could call me and if I could answer it.
I tried with a bluetooth headphone (there is a button on it to answer call so I don't need to push the button on the screen).
As soon as I hear ring, I push the button, for me it stop ringing but my girlfriend have to wait for my screen to show up for the call to work properly. (If my screen si black, it's still ringing for her)
Click to expand...
Click to collapse
Try flashing firmware with sp flashtool. This will update not only kernel and system, but preloader and bootloader too. Good luck!
CAUTION!! DO NOT USE FORMAT OPTION!! YOU WILL ERASE NVRAM AND YOUR IMEI WILL BE PERMANENTLY LOST!!
nasko_spasko said:
Try flashing firmware with sp flashtool. This will update not only kernel and system, but preloader and bootloader too. Good luck!
CAUTION!! DO NOT USE FORMAT OPTION!! YOU WILL ERASE NVRAM AND YOUR IMEI WILL BE PERMANENTLY LOST!!
Click to expand...
Click to collapse
I followed these instruction from the seller (more than 2 weeks ago) :
Hi friend,
Please would you have a try to flash firmware to check?
Xiaomi_Redmi_Note_2_MIUI_7_PC_Lang_1009.zip
699.0 MB
mega.nz/#!yM9CnDqK!ntcKry0LliM_vfNFZmy3rXt3spbkT1Ueg8_eAyagdS4
Steps:
1. download the phone driver from this link:
androidxda.com/download-xiaomi-usb-drivers
2.install the driver to your PC.
3.turn off your phone,press volume down and power button at the same time until you enter fastboot mode.
4.double click "Redmi_Note_2_Flash_click_me.cmd" to run the flashing tool.
5.connect your phone to PC,the flashing will be processing automatic.
6.after flashing success,reboot your phone.
=====================
Redmi Note 2 Flashing Guide Video.mp4 280.6 MB
mega.nz/#!aJ1BxT7Z!cSE7FDvFk0snSni0R-TR7oQfh06KRyC0nwPOFe9E-Zc
Jenny
Click to expand...
Click to collapse
Is is the same ?
Edit : When the phone is Off and I check the battery level (when it'is plugged on my computer) it's doing a similar problem, when I push the power button it show the % of battery but if I don't wait (like 15 seconds) between 2 "request" it's going to delay my "request".
Uhmi said:
I followed these instruction from the seller (more than 2 weeks ago) :
Is is the same ?
Edit : When the phone is Off and I check the battery level (when it'is plugged on my computer) it's doing a similar problem, when I push the power button it show the % of battery but if I don't wait (like 15 seconds) between 2 "request" it's going to delay my "request".
Click to expand...
Click to collapse
this is fastboot method, not SP Flash Tool Download method.
I'll try to explain fast.
Download latest version of SP flash tool > Google search It
Install mediatek VCOM drivers to your Windows PC, if on Linux there's no need of driver. See this tutorial. For the redmi note 2 on step 4 you have to do it without the battery. The whole flash procedure is performed with removed battery.
After a successful driver installation proceed with loading the firmware in SP Flash Tool. Download the latest global stable rom, fastboot format -arround 1GB. Extract the folder that contains The MT6795-Android-scatter file, boot.img, recovery.img, system.img, etc.
Disconnect your device and remove It's battery.
In SPFT Browse for mt6795androidscatter and all the partition should load automatically in the listbox bellow. On combo box download mode choose Firmware upgrade and hit the big Download button.
Now connect your device with battery removed. and all should go smooth.
I did It on Linux, because I don't really use Windows.
Feel free to ask further questions, will answer asap.
Choosing to do this is dangerous but this is the only method that flashes preloader and dsp and uboot parts. Take your own responsibility on this!
Bye!
nasko_spasko said:
The MT6795-Android-scatter file, boot.img, recovery.img, system.img, etc.
Click to expand...
Click to collapse
I can't find firmware with mt6795_Android_Scatter.txt and everything on it...I only find recovery with it :/ Do you have a link ?
Edit : Okay I just did it with the firmware from the seller, it didn't worked. It's still as before.
Uhmi said:
I can't find firmware with mt6795_Android_Scatter.txt and everything on it...I only find recovery with it :/ Do you have a link ?
Edit : Okay I just did it with the firmware from the seller, it didn't worked. It's still as before.
Click to expand...
Click to collapse
Well, in this case It's either from the LCD or the PCB of the device not sure how to verify right now.. Do You have another one, i mean device or at least spare LCD screen?
Best option here is to return for service.
I have Touchscreen issue on my hermes and I won't send it back because I don't want to wait another 2 months, I'll fix it on my own. The screen costs me ~28USD, so I'll go with It.
What I fear is that in Your case might be a faulty PCB. That means even if you replace the LCD the problem may remain.
Yeah I don't know...
Juste noticed the flash/light don't work either...
mmmh.
Here. Link for 7.0.8.0 global ROM for SPFT, just in case.
Hi,
I tried to download this ROM, if I need someday.
But it asking for the key to encrypt.
Can you give me the key?
Thanks
darko150 said:
Hi,
I tried to download this ROM, if I need someday.
But it asking for the key to encrypt.
Can you give me the key?
Thanks
Click to expand...
Click to collapse
Sorry! Link updated.
I have been using my Xperia Z2 for over 2 years with no major issue. Today it suddenly started freezing, even on start up. After restarting the phone for 20+ times for the entire day, I have decided to run a factory reset, but after the reset my Xperia Z2 only load pass the start up Sony logo and Android logo screen and stuck in the blue wavy screen for like 5-10 min then reboot itself again until the blue wavy screen and restart again in an endless loop.
I did not flash any rom or recovery on my Xperia Z2, it is purely stock rom from Sony, with no root. Any one can please give me a hint on how to revive my Xperia Z2 again?
mowilfred said:
I have been using my Xperia Z2 for over 2 years with no major issue. Today it suddenly started freezing, even on start up. After restarting the phone for 20+ times for the entire day, I have decided to run a factory reset, but after the reset my Xperia Z2 only load pass the start up Sony logo and Android logo screen and stuck in the blue wavy screen for like 5-10 min then reboot itself again until the blue wavy screen and restart again in an endless loop.
I did not flash any rom or recovery on my Xperia Z2, it is purely stock rom from Sony, with no root. Any one can please give me a hint on how to revive my Xperia Z2 again?
Click to expand...
Click to collapse
Use flashtool by androxyde and flash the latest .FTF of your region onto your Z2, afterwards it should be good to go.
iXaidyiu said:
Use flashtool by androxyde and flash the latest .FTF of your region onto your Z2, afterwards it should be good to go.
Click to expand...
Click to collapse
Thanks, but where can I find the latest .FTF of my region?
mowilfred said:
Thanks, but where can I find the latest .FTF of my region?
Click to expand...
Click to collapse
Inside flashtool > XperiFirm
Sent from my Sony D6503 via Tapatalk
iXaidyiu said:
Inside flashtool > XperiFirm
Sent from my Sony D6503 via Tapatalk
Click to expand...
Click to collapse
I am new to this, but do I need to unlock my bootloader before I can flash the stock rom?
No, it should work right away. Be sure to install the right drivers, that's all.
mowilfred said:
I have been using my Xperia Z2 for over 2 years with no major issue. Today it suddenly started freezing, even on start up. After restarting the phone for 20+ times for the entire day, I have decided to run a factory reset, but after the reset my Xperia Z2 only load pass the start up Sony logo and Android logo screen and stuck in the blue wavy screen for like 5-10 min then reboot itself again until the blue wavy screen and restart again in an endless loop.
I did not flash any rom or recovery on my Xperia Z2, it is purely stock rom from Sony, with no root. Any one can please give me a hint on how to revive my Xperia Z2 again?
Click to expand...
Click to collapse
Did you got any progress?
i had same issue and since year i didnt gave up on this phone currently its just an expensive peace of brick let me know i guess snapdragon 801 in phone gets bricked in most cases
airbornic said:
Did you got any progress?
i had same issue and since year i didnt gave up on this phone currently its just an expensive peace of brick let me know i guess snapdragon 801 in phone gets bricked in most cases
Click to expand...
Click to collapse
Yes I simply flash the lastest firmware of my Z2 in my region and the phone us back to life once again! It took me a while since it's my first time flashing with a Sony phone but it's a pretty simple process.
mowilfred said:
Yes I simply flash the lastest firmware of my Z2 in my region and the phone us back to life once again! It took me a while since it's my first time flashing with a Sony phone but it's a pretty simple process.
Click to expand...
Click to collapse
Please check PM
I came back my old z2, I'm changig same parts of an old z2, and it's simply the battery, it was broken....I'm feeling very stupid
mowilfred said:
I have been using my Xperia Z2 for over 2 years with no major issue. Today it suddenly started freezing, even on start up. After restarting the phone for 20+ times for the entire day, I have decided to run a factory reset, but after the reset my Xperia Z2 only load pass the start up Sony logo and Android logo screen and stuck in the blue wavy screen for like 5-10 min then reboot itself again until the blue wavy screen and restart again in an endless loop.
I did not flash any rom or recovery on my Xperia Z2, it is purely stock rom from Sony, with no root. Any one can please give me a hint on how to revive my Xperia Z2 again?
Click to expand...
Click to collapse
Hi guys, I've the same problem.
Cyanogenmod 12.1 ,the phone was dead, I tried to charge the battery but it's in bootloop.
I tried to flash with 2 software but nothing, I tried with Xperia but it said the phone is rooted.
Can someone help me please
An68 said:
Hi guys, I've the same problem.
Cyanogenmod 12.1 ,the phone was dead, I tried to charge the battery but it's in bootloop.
I tried to flash with 2 software but nothing, I tried with Xperia but it said the phone is rooted.
Can someone help me please
Click to expand...
Click to collapse
Did you try flashtools???
And if you didn't check all boxes of wipe section when you want to flash the phone
raminta said:
Did you try flashtools???
And if you didn't check all boxes of wipe section when you want to flash the phone
Click to expand...
Click to collapse
Hi Raminta,
I used Flasher by Androxyde 0.9.23.2, and Emma; I tried don't check wipe boxes
but nothing change
An68 said:
Hi Raminta,
I used Flasher by Androxyde 0.9.23.2, and Emma; I tried don't check wipe boxes
but nothing change
Click to expand...
Click to collapse
Oh sorry my bad i mean select all boxes of wipe section
And use flashtools V0.9.18 it is
raminta said:
Oh sorry my bad i mean select all boxes of wipe section
And use flashtools V0.9.18 it is
Click to expand...
Click to collapse
Ok I'll try. Thanks
An68 said:
Ok I'll try. Thanks
Click to expand...
Click to collapse
I installed 9.18.1 version; it detects that my phone is rooted. I flashed the xperia downloaded ftf file after bundled and other ftf from web, but nothing.
What's wrong?
An68 said:
I installed 9.18.1 version; it detects that my phone is rooted. I flashed the xperia downloaded ftf file after bundled and other ftf from web, but nothing.
What's wrong?
Click to expand...
Click to collapse
What is the log of flashtools???
Did it shows error???
(That red line on picture is not important)
raminta said:
What is the log of flashtools???
Did it shows error???
(That red line on picture is not important)
Click to expand...
Click to collapse
Hi Raminta
Here is the log with the ftf file I created.
I don't know why, but for flash I disconnet the cable battery
An68 said:
Hi Raminta
Here is the log with the ftf file I created.
I don't know why, but for flash I disconnet the cable battery
Click to expand...
Click to collapse
Here's what happens
An68 said:
Here's what happens
Click to expand...
Click to collapse
Disconnect the phone, prepare the bundle for flashing on pc, press Vol- when prompt to reconnect your phone.
Or use v0.9.18.6
Sent from my sirius using XDA Labs
iXaidyiu said:
Disconnect the phone, prepare the bundle for flashing on pc, press Vol- when prompt to reconnect your phone.
Or use v0.9.18.6
Sent from my sirius using XDA Labs
Click to expand...
Click to collapse
Hi iXaidyiu thanks,
I attach the logs of the test done,unfortunately nothing has changed.