Fastest ROM
Credits:Nova Launcher - TeslaCoil Software Personalization
Samsung Galaxy Tab 4 - Samsung Electronics
Android 4.4.4 - Google Inc.
Requirements:TWRP 3.1.1
Download:https://www.androidfilehost.com/?w=files&flid=276969
- Secretwolf98
Hi Secretwolf98
Is there any option to install this Rom in a SM-T230 (not NU) just like in your other releases?
Thaur250 said:
Hi Secretwolf98
Is there any option to install this Rom in a SM-T230 (not NU) just like in your other releases?
Click to expand...
Click to collapse
After reading many feedbacks from others on my past ROMs that it won't boot on SM-T230. So, it won't work. Sorry, tho.
It's not going past the boot animation screen on my Samsung T-231.
ramesh_ndyd said:
It's not going past the boot animation screen on my Samsung T-231.
Click to expand...
Click to collapse
Try this build, https://www.androidfilehost.com/?fid=890278863836295905
secretwolf98 said:
Try this build,
Click to expand...
Click to collapse
just sits at boot animation forever. t230nu
Robbhimself said:
just sits at boot animation forever. t230nu
Click to expand...
Click to collapse
Ok, I'll build up a V3.
Robbhimself said:
just sits at boot animation forever. t230nu
Click to expand...
Click to collapse
Try this new build. https://www.androidfilehost.com/?fid=746163614322275462
My SMT231 won't start either ??? What to do? Just hanging on the logo
ALIKS82 said:
My SMT231 won't start either ??? What to do? Just hanging on the logo
Click to expand...
Click to collapse
Did you try V3?
Yes version 3 and version 2 will not start
---------- Post added at 10:50 AM ---------- Previous post was at 10:49 AM ----------
Logo hangs and no longer stratified
ALIKS82 said:
Yes version 3 and version 2 will not start
---------- Post added at 10:50 AM ---------- Previous post was at 10:49 AM ----------
Logo hangs and no longer stratified
Click to expand...
Click to collapse
ok, V4 might come if I can find a solution.
OK I will wait at once I will put
secretwolf98 said:
ok, V4 might come if I can find a solution.
Click to expand...
Click to collapse
so eta on one of your roms that work lol?
seems like none of the roms you post work. no offense,
---------- Post added at 04:24 PM ---------- Previous post was at 04:19 PM ----------
this rom doesnt work
your "android p lite" rom doesnt work
cm unofficial is abandoned
what do? lol
Google Lite P v9.2 we set up this ROM . If your finish 4.4.4 will put your
Robbhimself said:
so eta on one of your roms that work lol?
seems like none of the roms you post work. no offense,
---------- Post added at 04:24 PM ---------- Previous post was at 04:19 PM ----------
this rom doesnt work
your "android p lite" rom doesnt work
cm unofficial is abandoned
what do? lol
Click to expand...
Click to collapse
use cm 11 until then.
secretwolf98 said:
use cm 11 until then.
Click to expand...
Click to collapse
cm-11-20180312-UNOFFICIAL-degaswifi doesnt work either on my t230nu.
can you link me one of your roms that actually work? thanks
Robbhimself said:
cm-11-20180312-UNOFFICIAL-degaswifi doesnt work either on my t230nu.
can you link me one of your roms that actually work? thanks
Click to expand...
Click to collapse
That's very strange, cm-11-20180312-UNOFFICIAL-degaswifi.zip works fine for me. What TWRP version are you using? What steps did you do in TWRP to install, "cm-11-20180312-UNOFFICIAL-degaswifi.zip"?
secretwolf98 said:
That's very strange, cm-11-20180312-UNOFFICIAL-degaswifi.zip works fine for me. What TWRP version are you using? What steps did you do in TWRP to install, "cm-11-20180312-UNOFFICIAL-degaswifi.zip"?
Click to expand...
Click to collapse
i think when i was trying to flash your non working android p lite and fastest rom and they didnt boot i tried formatting all partition etc and starting over and something broke. i had cm11 on it at one point and it worked but whatever happened when i tried to get your other roms working broke something
i get unable to mount /data etc in twrp ill edit my post with a screenshot or pic later as mtp isnt working and adb doesnt detect it anymore.
anyway im trying to flash the stock firmware with odin at the moment...write failure
im guessing i need to flash the pit and repartition to fix this.trying that now
edit:
added pit file under pit tab in odin (https://www.sammobile.com/forum/threads/30314-Galaxy-Tab-4-7-0-PIT-files)
checked repartition,
added stock firmware to ap box (https://updato.com/firmware-archive-select-model?record=DF66CC1020C911E6949E0CC47A44B7B2)
currently sitting on this for about an hour
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
edit 2: rebooted a bunch of times and odin flash finally went succeeded. lets see if it actually boots to the stock rom. seems to just be hanging on the stock samsung boot animation :crying:
ok after a factory reset from stock recovery it finally booted into stock rom
Robbhimself said:
i think when i was trying to flash your non working android p lite and fastest rom and they didnt boot i tried formatting all partition etc and starting over and something broke. i had cm11 on it at one point and it worked but whatever happened when i tried to get your other roms working broke something
i get unable to mount /data etc in twrp ill edit my post with a screenshot or pic later as mtp isnt working and adb doesnt detect it anymore.
anyway im trying to flash the stock firmware with odin at the moment...write failure
im guessing i need to flash the pit and repartition to fix this.trying that now
edit:
added pit file under pit tab in odin (https://www.sammobile.com/forum/threads/30314-Galaxy-Tab-4-7-0-PIT-files)
checked repartition,
added stock firmware to ap box (https://updato.com/firmware-archive-select-model?record=DF66CC1020C911E6949E0CC47A44B7B2)
currently sitting on this for about an hour
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
edit 2: rebooted a bunch of times and odin flash finally went succeeded. lets see if it actually boots to the stock rom. seems to just be hanging on the stock samsung boot animation :crying:
ok after a factory reset from stock recovery it finally booted into stock rom
Click to expand...
Click to collapse
Well your lucky. Repartition bricks the tablet.
Related
EDIT: SOLVED. ANSWER IS ON PAGE TWO. REMOVE BATTERY BEFORE ODIN REBOOT YOUR PHONE, AND THEN BOOT IN RECOVERY AND FLASH SUPERUSER. THANKS TO KINGHORSEY FOR THE FIND.
Hi guys,
I'm using a Rogers Galaxy Note on ICS 4.0.4. I'm trying to root it at the moment. I downloaded Odin version 3v 1.85 with CMW found at this link: http://forum.xda-developers.com/showthread.php?t=1584576
So, installed the driver, the phone is recognized in device manager as Samsung Mobile USB CDC Composite Device, and when I plug it into Odin it gives me com 4 ok.
Clicked PDA, added the CMW tar.md5 and pressed start. Odin tells me it has installed the image properly. My flash counter went up one notch, but when I reboot into recovery I still get to Android's stock recovery (which does not allow me to flash Superuser from my SD card).
I'm probably missing something here. What am I doing wrong?
Thank you
Technically....nothing
I'd run it again.....g
I'm at round number 7 haha and still no CWM.
theinvisiblehand said:
I'm at round number 7 haha and still no CWM.
Click to expand...
Click to collapse
Holy cow !!...LOL
Fort Knox note.......:laugh:
Can you list your step sequence ??
Wasn't there a script installed on the Rogers ics OTA that restores original recovery on boot? That script needs to be deleted after root is achieved and then cwm flashed again for it to stick.
Gubment Cheeze
---------- Post added at 01:59 PM ---------- Previous post was at 01:54 PM ----------
Try flashing cwm but don't tick reboot phone on Odin. Once flash is succesful , use 3 button combo to get into recovery. Flash su zip and reboot. Use file explorer of your choice to remove recovery script. Once that's done flash cwm again and hopefully it will stick.
Gubment Cheeze
Froid said:
Wasn't there a script installed on the Rogers ice OTA that restores original recovery on boot? That script needs to be deleted after root is achieved and then cwm flashed again for it to stick.
Gubment Cheeze
Click to expand...
Click to collapse
just reviewed the Rogers ICS 4.0.4 root from braway's thread, and didnt see it, but still looking..
this is the 3rd user root issue in 24 hours....
something is going on....g
gregsarg said:
Holy cow !!...LOL
Fort Knox note.......:laugh:
Can you list your step sequence ??
Click to expand...
Click to collapse
There you go. I'm running all of this on Windows 8 preview 32 bits. The samsung driver I use is the version 1_3_2200. I think its the most recent.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cwm-touch-i717-120414.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Froid said:
Wasn't there a script installed on the Rogers ics OTA that restores original recovery on boot? That script needs to be deleted after root is achieved and then cwm flashed again for it to stick.
Gubment Cheeze
---------- Post added at 01:59 PM ---------- Previous post was at 01:54 PM ----------
Try flashing cwm but don't tick reboot phone on Odin. Once flash is succesful , use 3 button combo to get into recovery. Flash su zip and reboot. Use file explorer of your choice to remove recovery script. Once that's done flash cwm again and hopefully it will stick.
Gubment Cheeze
Click to expand...
Click to collapse
Might as well try that. Where will I find said recovery script? Thank you
Try mount/system/etc folder. It would start with install.recovery or something similar. It won't let you delete it until you're rooted using es file explorer or root explorer type of app.
Gubment Cheeze
---------- Post added at 02:12 PM ---------- Previous post was at 02:09 PM ----------
I'm going from memory here so you might wanna search for more info and if this is even your issue..
Gubment Cheeze
theinvisiblehand said:
There you go. I'm running all of this on Windows 8 preview 32 bits. The samsung driver I use is the version 1_3_2200. I think its the most recent.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> cwm-touch-i717-120414.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
yep...root is good,....
still looking for this script issue....g
If you pull the battery after flashing cwm but before it reboots then going into recovery and flashing superuser you'll bypass the install script.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
gregsarg said:
yep...root is good,....
still looking for this script issue....g
Click to expand...
Click to collapse
thanks a lot
Kinghorsey got it.......g
All right it worked! I pulled the batterie before it rebooted and it worked. Thanks a lot everyone. I'm backing up my system as we speak before I reboot.
Thanks!
Probably should put a " solved" into the thread title...so other users can find this..
King ?
Is this info in the root thread ??
Edit:
He's gone I guess....thanks King.....Great find....g
I don't recall if its in the root thread or not. It seemed to be an issue specific to Canadian Notes and their OTA ICS updates. I'm not sure if it also applies to the AT&T version.
There was a thread about it a while back.
Surest way to bypass the script completely is to flash a copy from samfirmware. The script isn't in that copy and you don't get all the bugginess associated with an OTA update.
I highly recommend that method.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
kinghorsey said:
I don't recall if its in the root thread or not. It seemed to be an issue specific to Canadian Notes and their OTA ICS updates. I'm not sure if it also applies to the AT&T version.
There was a thread about it a while back.
Surest way to bypass the script completely is to flash a copy from samfirmware. The script isn't in that copy and you don't get all the bugginess associated with an OTA update.
I highly recommend that method.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the reply....
Bigjoe has added your "trick " into the super thread, and I think it's a great addition to users here ...(credit given )
I searched the thread completely, and found no mention of that trick .....but it's in the thread header now.
Again ...THANK YOU !!!!...g
Just a heads up to anyone who needs to go this route....pulling the battery will get you into cwm recovery the 1st time. Once the phone is booted up the user will lose their custom recovery and will be replaced by stock 3e recovery.
Gubment Cheeze
I'd love to take credit for this fix but I can't - I only read about it here and didn't discover it on my own. In fact, I never had this problem since I used Odin + samfirmware.com as opposed to OTA updating.
The moral of the story is that even stock.upgrades are better when you are in control.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
---------- Post added at 09:19 PM ---------- Previous post was at 09:17 PM ----------
Froid said:
Just a heads up to anyone who needs to go this route....pulling the battery will get you into cwm recovery the 1st time. Once the phone is booted up the user will lose their custom recovery and will be replaced by stock 3e recovery.
Gubment Cheeze
Click to expand...
Click to collapse
From what I understood this only happened if you didn't pull the battery.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
The script is still in place. Pulling the battery just gets you into recovery to root. Once you're rooted you can delete the script. Then you need to flash cwm again and you should be good to go.
Gubment Cheeze
HI,
I was trying to flash back to original ROM , and i downloaded the ROM from samfirmware.com.
Seeing the pdf provided by them i ticked re-partition, auto reboot, and f.reset time, clicked on PIT and put the .pit file, also in the PDA option i selected the .md5 file
after clicking on START, odin got stuck on zimage.
Now no matter what i do, odin is not goin forward,
my phone is going to download mode but nothing happens when i flash
Please help
anikethpopup said:
HI,
I was trying to flash back to original ROM , and i downloaded the ROM from samfirmware.com.
Seeing the pdf provided by them i ticked re-partition, auto reboot, and f.reset time, clicked on PIT and put the .pit file, also in the PDA option i selected the .md5 file
after clicking on START, odin got stuck on zimage.
Now no matter what i do, odin is not goin forward,
my phone is going to download mode but nothing happens when i flash
Please help
Click to expand...
Click to collapse
I thought firmwares from sammobile do not have .pit files? I flash quite a lot from their website. No pit files. The only boxes you need to tick is auto reboot. That's it. Why did you tick the others?
Sent from my potato.
preseodymium said:
I thought firmwares from sammobile do not have .pit files? I flash quite a lot from their website. No pit files. The only boxes you need to tick is auto reboot. That's it. Why did you tick the others?
Sent from my potato.
Click to expand...
Click to collapse
I had no idea, the pdf file provided by them clearly mentioned that you have to tick re-partition and the .pit file i found from the rar file which also contained ODIN
anikethpopup said:
I had no idea, the pdf file provided by them clearly mentioned that you have to tick re-partition and the .pit file i found from the rar file which also contained ODIN
Click to expand...
Click to collapse
Isn't it in zip file? Hmm. That's kinda weird.
Sent from my potato.
preseodymium said:
Isn't it in zip file? Hmm. That's kinda weird.
Sent from my potato.
Click to expand...
Click to collapse
ya sorry , it was in a zip file
how do i make it alright now
anikethpopup said:
ya sorry , it was in a zip file
how do i make it alright now
Click to expand...
Click to collapse
Can it still go into download mode?
Sent from my potato.
preseodymium said:
Can it still go into download mode?
Sent from my potato.
Click to expand...
Click to collapse
Yes, it can still go to download mode.
anikethpopup said:
Yes, it can still go to download mode.
Click to expand...
Click to collapse
What's your region? I'll help you get the website since I'm free.
Sent from my potato.
---------- Post added at 05:39 PM ---------- Previous post was at 05:38 PM ----------
BTW your firmware is i9100 not i9100G right? I don't wanna get you into trouble lol
Sent from my potato.
preseodymium said:
What's your region? I'll help you get the website since I'm free.
Sent from my potato.
---------- Post added at 05:39 PM ---------- Previous post was at 05:38 PM ----------
BTW your firmware is i9100 not i9100G right? I don't wanna get you into trouble lol
Sent from my potato.
Click to expand...
Click to collapse
I am from India, and i have the gt-i9100 .
http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=INU&os=1&type=1#firmware
Here, download the version you want. Don't download anything else. Hope it helps.
Sent from my potato.
Flash recovery and install custom rom.
preseodymium said:
http://www.sammobile.com/firmware/?page=3&model=GT-I9100&pcode=INU&os=1&type=1#firmware
Here, download the version you want. Don't download anything else. Hope it helps.
Sent from my potato.
Click to expand...
Click to collapse
I have already downloaded the version 4.0.4, and when i try to flash it back, this is what i get
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> zImage
It gets stuck here, and doesn't go forward at all
Please find the screenshot of ODIN.
anikethpopup said:
I have already downloaded the version 4.0.4, and when i try to flash it back, this is what i get
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> zImage
It gets stuck here, and doesn't go forward at all
Please find the screenshot of ODIN.
Click to expand...
Click to collapse
Could be Odin version. I used 1.85 you can try that.
Sent from my potato.
desirech4cker said:
Flash recovery and install custom rom.
Click to expand...
Click to collapse
How do i flash recovery ????
anikethpopup said:
How do i flash recovery ????
Click to expand...
Click to collapse
You are going to stock firmware you don't have to do it. he's talking about custom ROMs.
Sent from my potato.
preseodymium said:
Could be Odin version. I used 1.85 you can try that.
Sent from my potato.
Click to expand...
Click to collapse
Just downloaded ODIN 1.85, Its the same..
Please see the screenshot
anikethpopup said:
Just downloaded ODIN 1.85, Its the same..
Please see the screenshot
Click to expand...
Click to collapse
If it still doesn't work, untick F.reset time. Also make sure kies isn't running in the background
Sent from my potato.
preseodymium said:
If it still doesn't work, untick F.reset time. Also make sure kies isn't running in the background
Sent from my potato.
Click to expand...
Click to collapse
Nope, still the same, KIES is not running, double checked in task manager.
anikethpopup said:
Nope, still the same, KIES is not running, double checked in task manager.
Click to expand...
Click to collapse
Hmmm. Then I don't really understand what your problem is. Unless you want to try uninstalling kies and installing again to have the correct drivers but I think it shouldn't be...
Sent from my potato.
---------- Post added at 06:34 PM ---------- Previous post was at 06:20 PM ----------
I think you can use another USB cable because sometimes its the cause of problems.
Sent from my potato.
v1.85 shows it started the NAND write as compared to the prev version which you say stopped at the zimage step. Did you give it sufficient time? A few minutes at the very least.
Try a different cable. Also ensure you're using a USB port on the computer itself and not via a hub or a port on your keyboard or something. Odin is an incredibly finnicky s/w. If possible, use the USB port at the back of the CPU..the ones at the front are usually connected to the motherboard via extension cables and have been known to give trouble with Odin as well.
If none of this works, try another computer
good luck mate.
Sent from my GT-I9100 using xda app-developers app
Hello everybody from XDA!
I'm having a MAJOR problem.
I recently bought an S3 one week ago. I rooted it and deleted some of the system apps.
So I was playing around with Swap files and such, and I deleted "Swapper2" which then suddenly my phone powered off and it got stuck in a bootloop.
Now I've flashed before and sometimes with flashing some thing went wrong, but it never got me as nervous as this.
I did a factory reset and it didn't help.
Would it help if I flashed a stock jellybean rom again? I REALLY need it working again ASAP. I have a wedding coming up from a family member in the morning and I need to plan A LOT of stuff. I don't have a second device either.
It's 02:40 at night here in the Netherlands, so I don't have a lot of time too. Not to mention, because of this lack of sleep too.
Samsung Galaxy S3 GT I9300
Stock JB 4.1.2
Siyah kernel
With kind regards (and hands in my hair and stressing)
Try to go to download mode and flash a stock firmware via Odin.
sachilleas said:
Try to go to download mode and flash a stock firmware via Odin.
Click to expand...
Click to collapse
At the moment I am in download mode. I'm waiting 50 minutes for the stock rom to download. (Seriously, hotfile is slow as %&@#). About 5 minutes is left. Odin recognizes my phone too.
Any confirmation that this would actually work?
AndroidFan2 said:
At the moment I am in download mode. I'm waiting 50 minutes for the stock rom to download. (Seriously, hotfile is slow as %&@#). About 5 minutes is left. Odin recognizes my phone too.
Any confirmation that this would actually work?
Click to expand...
Click to collapse
Don't panic. It will. It will write all the Rom files again (including the ones you deleted ).
sachilleas said:
Don't panic. It will. It will write all the Rom files again (including the ones you deleted ).
Click to expand...
Click to collapse
Thank you!
I'm in the process of flashing it now. I hope it will work
AndroidFan2 said:
Thank you!
I'm in the process of flashing it now. I hope it will work
Click to expand...
Click to collapse
I hope it too. Confirm the outcome after the flashing is over!
sachilleas said:
I hope it too. Confirm the outcome after the flashing is over!
Click to expand...
Click to collapse
I flashed it and the Samsung logo appeared with the sound (which was like heaven to me.) Untill I realized it came into a black screen and rebooted again....
AndroidFan2 said:
I flashed it and the Samsung logo appeared with the sound (which was like heaven to me.) Untill I realized it came into a black screen and rebooted again....
Click to expand...
Click to collapse
This is very odd. Odin should write all the system files you deleted. There must be a solution but I really can't help you any further unfortunately.
sachilleas said:
This is very odd. Odin should write all the system files you deleted. There must be a solution but I really can't help you any further unfortunately.
Click to expand...
Click to collapse
I used Swapper2 which uses a swap file from SD and uses it as RAM. Maybe if I took out the SD card and flashed it again?
I REALLY need it working...
You used the PDA slot in Odin?
JRJ442 said:
You used the PDA slot in Odin?
Click to expand...
Click to collapse
Yes I did. It was the only file I got from extracting it.
AndroidFan2 said:
I used Swapper2 which uses a swap file from SD and uses it as RAM. Maybe if I took out the SD card and flashed it again?
I REALLY need it working...
Click to expand...
Click to collapse
Swap is kernel related and the stock Rom's kernel you just flashed does not even support swap so it should totally disregard the whole swap thing. Anyway , Try to flash the stock rom once again without the sdcard in case something went wrong the first time.
Also check that the Rom's file you downloaded is not corrupted via md5 checksum.
sachilleas said:
Swap is kernel related and the stock Rom's kernel you just flashed does not even support swap so it should totally disregard the whole swap thing. Anyway , Try to flash the stock rom once again without the sdcard in case something went wrong the first time.
Also check that the Rom's file you downloaded is not corrupted via md5 checksum.
Click to expand...
Click to collapse
I flashed stock again without my SD card inserted. It did not help..
Would it maybe help if I rooted it with a custom kernel and flashed a custom rom? I myself was thinking about CM10.1
Also; does this mean the end of my new S3? I'm guessing a JIG wouldn't help me much either, as I can normally enter download mode..
Here is what Odin says:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMC3_I9300NEEEMC1_I9300XXEMB6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Everything seems fine, I wonder why it does not boot. I really don't know if a custom Rom could save the day, but if you install a custim recovery, run megawipe to eliminate everything before installing your Rom : http://forum.xda-developers.com/showthread.php?t=1832326
sachilleas said:
Everything seems fine, I wonder why it does not boot. I really don't know if a custom Rom could save the day, but if you install a custim recovery, run megawipe to eliminate everything before installing your Rom : http://forum.xda-developers.com/showthread.php?t=1832326
Click to expand...
Click to collapse
I've never used tools like that, so I don't have much experience with it. How will I put this .zip on my phone? I don't have a card reader on my PC.
Also, reading the topic I need to have a ROM on my ext. SD to flash after. Can't I just plug it into my PC and run stock again? Or would my PC not recognize the phone? I preffer stock and not custom..
*edit* I just realized booting into recovery gives me the: "E: failed to mount /efs (Invalid argument)" Error. Is this my ext. sd card?
Also, I do NOT have a backup of my IMEI, or my efs. I read on some other forums that this is a pretty serious error, and most of them go to Samsung to repair the phone. I've avoided my warranty already, so I don't know if I can go to a Samsung center (we don't have one in my city, so I have to travel by train about 15 km) (Sigh)
Desperately waiting for an answer, and still with hands in my hair.
Ca you now grt into Recovery?
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 04:44 PM ---------- Previous post was at 04:41 PM ----------
Grrr. Hit wrong key. If you can get to recovery you shojld be able yo flashthings - do you have backups or downloads on card etc?
Sent from my GT-I9300 using xda app-developers app
Journyman16 said:
Ca you now grt into Recovery?
Sent from my GT-I9300 using xda app-developers app
---------- Post added at 04:44 PM ---------- Previous post was at 04:41 PM ----------
Grrr. Hit wrong key. If you can get to recovery you shojld be able yo flashthings - do you have backups or downloads on card etc?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes, I can get into recovery. I don't have a nandroid backup, or a backup of my /efs folder. I didn't came to that process yet.
AndroidFan2 said:
Yes, I can get into recovery.
Click to expand...
Click to collapse
When you can get in recovery mode, try wipe data en wipe cache. and restart again
nawesi07 said:
When you can get in recovery mode, try wipe data en wipe cache. and restart again
Click to expand...
Click to collapse
I tried this already. It still gives me the error to mount /efs file. Wiping data & cache didn't help.
Try restoring your backed up EFS folder .
jje
So I was given a softbricked s6 edge from work to play with. Needs a bit of detective work as I have no idea about history of phone, only face values. Heres what i know;
boots in to odin mode
does not boot rom
does not boot recovery
when i try to flash stock roms through odin it gets stuck at initialisation
warranty void/binary samsung: official/sys status: official
What i want to know is what you would recommend trying in order to get the phone to boot stock rom, given the information i have. for example is there any way to narrow down or diagnose the issue? Anything goes and it doesn't matter if i hard brick the thing its just a mini project.
I will try methods and post results, hopefully they will help others in similar situations
MoxieProxy said:
So I was given a softbricked s6 edge from work to play with. Needs a bit of detective work as I have no idea about history of phone, only face values. Heres what i know;
boots in to odin mode
does not boot rom
does not boot recovery
when i try to flash stock roms through odin it gets stuck at initialisation
warranty void/binary samsung: official/sys status: official
What i want to know is what you would recommend trying in order to get the phone to boot stock rom, given the information i have. for example is there any way to narrow down or diagnose the issue? Anything goes and it doesn't matter if i hard brick the thing its just a mini project.
I will try methods and post results, hopefully they will help others in similar situations
Click to expand...
Click to collapse
Chances are OEM Unlock and USB debugging was not enabled in developer options if this was a work phone.
Try to flash a stock firmware, I would start with a MM firmware first. What model of s6 edge is it? G925F/T/I/V/A? It will show you in download mode.
callumbr1 said:
Chances are OEM Unlock and USB debugging was not enabled in developer options if this was a work phone.
Try to flash a stock firmware, I would start with a MM firmware first. What model of s6 edge is it? G925F/T/I/V/A? It will show you in download mode.
Click to expand...
Click to collapse
odin mode
product name: sm-g925f
current binary: samsung official
system status: official
reactivation lock: off
secure download: enabled
Knox warranty void: 1 (0x0500
rp swrev: B:5 K:2 S:2
^ everything in odin mode. Which firmware should i flash? could you possibly link me to it?
MoxieProxy said:
^ In odin mode. Which firmware should i flash? could you possibly link me to it?
Click to expand...
Click to collapse
Depends what model? Tell me what model you have and I can link firmware
callumbr1 said:
Depends what model? Tell me what model you have and I can link firmware
Click to expand...
Click to collapse
I thought "sm-g925f" was the model?
MoxieProxy said:
I thought "sm-g925f" was the model?
Click to expand...
Click to collapse
They come in different models. You need to make sure you have the correct model. Post a screenshot of Odin mode?
EDIT: I MISSED THAT POST WITH THE INFO.
http://updato.com/firmware-archive-select-model?record=254B8532AE1511E6B04AFA163EE8F90B
Download and flash this one.
callumbr1 said:
They come in different models. You need to make sure you have the correct model. Post a screenshot of Odin mode?
Click to expand...
Click to collapse
currently cant post links or images but the information i replied to you was EVERYTHING it says in odin mode.
MoxieProxy said:
currently cant post links or images but the information i replied to you was EVERYTHING it says in odin mode.
Click to expand...
Click to collapse
Check my edited post
callumbr1 said:
They come in different models. You need to make sure you have the correct model. Post a screenshot of Odin mode?
EDIT: I MISSED THAT POST WITH THE INFO.
http://updato.com/firmware-archive-select-model?record=254B8532AE1511E6B04AFA163EE8F90B
Download and flash this one.
Click to expand...
Click to collapse
Thanks! i believe i have tried this one though, but ill give it another go.
MoxieProxy said:
Thanks! i believe i have tried this one though, but ill give it another go.
Click to expand...
Click to collapse
Try an updated firmware then. Maybe try a 7.0 firmware. When you flash it post the Odin log here.
callumbr1 said:
Try an updated firmware then. Maybe try a 7.0 firmware. When you flash it post the Odin log here.
Click to expand...
Click to collapse
So its possible that the firmware version would be preventing it from progressing past initialisation
callumbr1 said:
Try an updated firmware then. Maybe try a 7.0 firmware. When you flash it post the Odin log here.
Click to expand...
Click to collapse
Is it also possible the carrier version could be the reason?
MoxieProxy said:
Is it also possible the carrier version could be the reason?
Click to expand...
Click to collapse
None of them would be the reason. It's usually because USB debugging is disabled in developer options or USB port/cable
Download the firmware and insert it to odin and we will take it from there. Make sure you use the csc file and not home_csc.
Try with Odin v3.10.7 first.
callumbr1 said:
None of them would be the reason. It's usually because USB debugging is disabled in developer options or USB port/cable
Download the firmware and insert it to odin and we will take it from there. Make sure you use the csc file and not home_csc.
Try with Odin v3.10.7 first.
Click to expand...
Click to collapse
Will be able to do tonight, thanks for help so far
MoxieProxy said:
Will be able to do tonight, thanks for help so far
Click to expand...
Click to collapse
Keep me updated :good:
callumbr1 said:
Keep me updated :good:
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
same story, gets here and nothing
MoxieProxy said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
same story, gets here and nothing
Click to expand...
Click to collapse
Try with odin v3.12.3......
callumbr1 said:
Try with odin v3.12.3......
Click to expand...
Click to collapse
same thing again. also when its charging i have realised there is no animation, just the static empty battery with a lighting bolt in it. idk if thats just cause of the rom or whatever just trying to compile info
shall i try flash the bl/ap/cp/csc separately?
MoxieProxy said:
shall i try flash the bl/ap/cp/csc separately?
Click to expand...
Click to collapse
Does the pc recognise it when it's plugged in? Try a different cable and port. Then flash the files separate. Use csc file not home_csc
UNOFFICIAL RELEASE - TWRP Recovery for Galaxy Tab S3 - SM-T825
TWRP 3.3.1-1 Released
May 22, 2019
TWRP 3.3.1-1 is out now for most currently supported devices.
What's new in 3.3.1-1:
* Fix selinux issues during formatting - dianlujitao
* Various fixes for toybox and toolbox builds - CaptainThrowback and bigbiff
* Flash both A and B partitions when installing a recovery ramdisk - Dees_Troy
* Add option to uninstall TWRP app from /system - Dees_Troy
* Create digest for subpartitions - bigbiff
Latest Build: 3.3.1-1
Current status: Testing
IMPORTANT:
BEFORE FLASHING TWRP, PLEASE READ THE INSTRUCTIONS FROM HERE: https://forum.xda-developers.com/gal...alaxy-t3581359
Downloads (MEGA):
Because of a problem, download links are temporarily removed.
SM-T825:
IMG: not available
TAR: not available
SM-T820:
IMG: not available
TAR: not available
Contributors:
@ashyx
@Mentalmuso
TWRP team
This post is friendly, and your feedback is appreciated A LOT.
Let's get started!
Build for T820 (Wifi) coming soon.
Reserved 1.
I use tweaked firmware android 9 on t-825. Version from 25.5.20 does not work. That is, I put it on top of 3.2.1 and twrp ceases to start at all.
vegych said:
I use tweaked firmware android 9 on t-825. Version from 25.5.20 does not work. That is, I put it on top of 3.2.1 and twrp ceases to start at all.
Click to expand...
Click to collapse
Hi and thanks for your feedback!.
If flashing over the old version doesn't work, try to flash it manually via Odin.
Tell me please if it works.
JordanBleu said:
Hi and thanks for your feedback!.
If flashing over the old version doesn't work, try to flash it manually via Odin.
Tell me please if it works.
Click to expand...
Click to collapse
Firmware through one does not help. There generally is a file analysis. Does this version work for you? Maybe I already forgot how it's all done?)
vegych said:
Firmware through one does not help. There generally is a file analysis. Does this version work for you? Maybe I already forgot how it's all done?)
Click to expand...
Click to collapse
Hi! Your image does not show in the website you sent me.
vegych said:
Firmware through one does not help. There generally is a file analysis. Does this version work for you? Maybe I already forgot how it's all done?)
Click to expand...
Click to collapse
Hello and sorry for replying late.
I tested my recovery today (since I had no time the other days) and it works fine on my Tab S3 LTE.
What variant do you have? Because for the moment it's only available for the SM-T825 (the cellular variant). If all goes well the version for the SM-T820 (the wifi variant) will be available tomorrow.
JordanBleu said:
Hello and sorry for replying late.
I tested my recovery today (since I had no time the other days) and it works fine on my Tab S3 LTE.
What variant do you have? Because for the moment it's only available for the SM-T825 (the cellular variant). If all goes well the version for the SM-T820 (the wifi variant) will be available tomorrow.
Click to expand...
Click to collapse
Just updated the version of twrp to 3.2.3.0 and requested 3.3.1.1 through twrp and anyway it is overwritten
Build for SM-T820 (Wifi) is now available; you can download it in the download section.
Enjoy!.
(BEFORE FLASHING TWRP, PLEASE READ THE INSTRUCTIONS FROM HERE) The link seems to be broken.
Pretty sure it should be pointing here:
https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359
I just installed the system completely through one 3.14.4 and tried to install this twrp version and still met with an error the file is analysis.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
Nothing happens next
Does anyone else have this version of recovery working?
vegych said:
I just installed the system completely through one 3.14.4 and tried to install this twrp version and still met with an error the file is analysis.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
Nothing happens next
Does anyone else have this version of recovery working?
Click to expand...
Click to collapse
I'm going to give it a go here in a sec. I'll report back
---------- Post added at 08:24 AM ---------- Previous post was at 08:06 AM ----------
greeg32 said:
I'm going to give it a go here in a sec. I'll report back
Click to expand...
Click to collapse
Still working on it. My wife is using our main laptop so I'm using the old one which has.....issues LOL. The joys of working from home together!
---------- Post added at 08:48 AM ---------- Previous post was at 08:24 AM ----------
greeg32 said:
I'm going to give it a go here in a sec. I'll report back
---------- Post added at 08:24 AM ---------- Previous post was at 08:06 AM ----------
Still working on it. My wife is using our main laptop so I'm using the old one which has.....issues LOL. The joys of working from home together!
Click to expand...
Click to collapse
Update: Did not work, same issue you had (stuck on "file analysis"). Tried downloading the IMG file and making a TAR, that didn't work either.
greeg32 said:
Update: Did not work, same issue you had (stuck on "file analysis"). Tried downloading the IMG file and making a TAR, that didn't work either.
Click to expand...
Click to collapse
That's what happened
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 25 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> twrp_3.3.1-1_T825_25520.img
<ID:0/004> Unassigned file
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
t825
hi @JordanBleu thank you so much for these. i bought this tab when we weren't sanctioned and now i can't afford anything else. i use it mostly as a annotation tool for textbooks and courses cause i can't carry books and notebooks around. is there anyway you can help me with compiling a permissive Bootable kernel for the stock rom? i tried to do it but it won't boot and when i used any kernel, it booted but wifi was out and the old method for fixing it doesn't work. plus as soon as i flash magisk it bootloops and overheats.
id really really appreciate some help on this. thanks
cheers
ps:couldn't use this on my tablet. it can't be flashed via odin and flashing the image with the old twrp breaks the recovery altogether.
JordanBleu said:
Build for SM-T820 (Wifi) is now available; you can download it in the download section.
Enjoy!.
Click to expand...
Click to collapse
Hi, where is the link to the file?
Neo3D said:
Hi, where is the link to the file?
Click to expand...
Click to collapse
Actually I removed every link of the recovery since it had problems and never even booted up, I'm sorry.
I will ask the moderator(s) to remove this thread and the other one of Evolution X of mine since they never worked and may confuse/mislead new users and get them into problems.
This is the thread of the semi official TWRP that works for your tablet: https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359
Again, I'm really sorry if I frustrated you with this noob experiment I made a few months ago.