Hello guys,
so I had installed RROS 8.1 on my Honor 9 STF-L09, but capacitive buttons and flashlight didn't work, so i decided to roll back to B120 via HWOTA in recovery, I think I chose a wrong stock recovery image so there went something wrong and the phone won't boot up..
It was stuck at the Bootloader unlocked - Your device is booting now... screen, I only can access fastboot mode.
I've already tried every unbrickng method I know. First I tried to unbrick it via Multitool and stock firmware and recovery but this didn't help, I did just get another screen where I was stuck(Error mode: func11: recovery , load failed or sth like that). I also tried flashing TWRP but it doesn't work, it says it was successfully installed, just like with multitool, but i am still stuck. Also tried flashing Stock recovery image and then using dload sd card method but it won't even go to Emui restoring screen.. I actually just tried to flash all the important image files from update.APP (which I know how to flash via fastboot), but it didn't do anything. After trying again via Multitool I am again stuck at the 'unlocked screen'.
If somebody could help i would be so thankful, I don't know what to do now.. THANK YOU
Sorry for my bad english I am a student from germany
Lord Juggelmann said:
Hello guys,
so I had installed RROS 8.1 on my Honor 9 STF-L09,
Click to expand...
Click to collapse
Which region ? C432 ?
Which version B36x ?
Lord Juggelmann said:
but capacitive buttons and flashlight didn't work, so i decided to roll back to B120 via HWOTA in recovery,
Click to expand...
Click to collapse
With which HWOTA ? 'HWOTA 8 to 7 rollback' ?
Lord Juggelmann said:
I think I chose a wrong stock recovery image
Click to expand...
Click to collapse
Which one ?
oslo83 said:
Which region ? C432 ?
Which version B36x ?
With which HWOTA ? 'HWOTA 8 to 7 rollback' ?
Which one ?
Click to expand...
Click to collapse
Yes, C432, i installed it on B363 bur don't know if it was the same at RROS.
Now that you ask I'm not that sure it could also have been the mistake that I maybe used HWOTA7 which I used to upgrade to Oreo B363. I tried to rollback to B130.
It was a STF_RECOVERY_NoCheck.img Recovery I think it actually was the Nougat version but could have also been oreo...
Thanks for replying btw
Try to install TWRP from this thread:
https://forum.xda-developers.com/showpost.php?p=75680308
Dpesnit install successfully ? Can you boot twrp now ?
oslo83 said:
Try to install TWRP from this thread:
https://forum.xda-developers.com/showpost.php?p=75680308
Dpesnit install successfully ? Can you boot twrp now ?
Click to expand...
Click to collapse
Installed successfully but still same result, can't boot into recovery..
You are trying with usb unplugged and with vol+ button ?
oslo83 said:
You are trying with usb unplugged and with vol+ button ?
Click to expand...
Click to collapse
Everytime I try to do without usb plugged I will get a red sign with a lightning that tells me battery is empty, this won't change if I charge it, could be an error but also could have to do something that it always stays on this booting now screen when plugged in and not in fastboot mode. Actually this Battery sign pops up everytime I shut it down when I try to boot(just not with fastboot), even if plugged in but then it works after a few seconds. I asked Multitool for Battery voltage in fastboot and got this answer: ...
(bootloader) 5298mv
OKAY [ 0.012s]
finished. total time: 0.020s
Btw I just noticed that in stuck screen red led lights up like every 2-3sec
Thank you for the fast answer
Leave the phone overnight (around 12 hours) to be charged with the original charger then try again on the computer
to restore it.
It happens to myself with a Motorola phone years ago.
mihaidenis said:
Leave the phone overnight (around 12 hours) to be charged with the original charger then try again on the computer
to restore it.
It happens to myself with a Motorola phone years ago.
Click to expand...
Click to collapse
I will try, what type of restoring do you mean?
Edit: Didn't work for me.. Still tells me battery is empty. I think it has to be a software issue or so:crying:
You can restore it using a paying software called DC-Phoenix.
I own a license, PM me if you need further help.
Related
Today morning i tried to update MCU with kld5 v2.97. Previously i had kld6 v2.91.
Afte that unit never booted again. All i get is a quick flash of malaysk boot logo for one second and then black screen with devices button lighting from blue to pink all the time.
I tried to flash firmware again with rkbatch tool and after finishing with success the same problem again.
Is there any way to flash old MCU again? Is there any tool to flash MCU from pc?
Billkaza said:
Today morning i tried to update MCU with kld5 v2.97. Previously i had kld6 v2.91.
Afte that unit never booted again. All i get is a quick flash of malaysk boot logo for one second and then black screen with devices button lighting from blue to pink all the time.
I tried to flash firmware again with rkbatch tool and after finishing with success the same problem again.
Is there any way to flash old MCU again? Is there any tool to flash MCU from pc?
Click to expand...
Click to collapse
try to flash MCU kld6 v2.91 from recovery
but i cant get into recovery
Billkaza said:
but i cant get into recovery
Click to expand...
Click to collapse
it's an img file so you could flash it in same way of firmware
Billkaza said:
I tried to flash firmware again with rkbatch tool and after finishing with success the same problem again.
Click to expand...
Click to collapse
rockchp batch tool doesnt leave me is there any other tool i could try?
I get loading firmware failed error.
sorry I cant help you more...
Case closed
Really dont know how but after several firmware flashes it came to life again.
Holding down reset whilst pressing power, releasing rest then releasing power does not work ? Do you ahve a power button ?
I have a power i tried booting to recovery but this didnt seem to fix my problem. Anyway as it is fixed i will never now what went wrong
Thanks guys for help
Billkaza said:
Today morning i tried to update MCU with kld5 v2.97. Previously i had kld6 v2.91.
Afte that unit never booted again. All i get is a quick flash of malaysk boot logo for one second and then black screen with devices button lighting from blue to pink all the time.
I tried to flash firmware again with rkbatch tool and after finishing with success the same problem again.
Is there any way to flash old MCU again? Is there any tool to flash MCU from pc?
Click to expand...
Click to collapse
Could you post your steps getting your computer to read the radio without recovery. Thanks!!
I'm very happy that your unit works again.
Just un-bricked my device with these steps!
http://forum.xda-developers.com/and...d-kgl-unit-t3457538/post68656680#post68656680
Hi,
i woke up this morning and the CM updater offered me to update for CM 14.1, i thougt welll, why not. mistake :crying:
Now the phone is stuck on the flashing CM logo,
if i try to go to fastboot, than i see the fastboot screen and than black screen and the phone goes back to the flashing CM logo.
Any thoughts?
guytsur7 said:
Hi,
i woke up this morning and the CM updater offered me to update for CM 14.1, i thougt welll, why not. mistake :crying:
Now the phone is stuck on the flashing CM logo,
if i try to go to fastboot, than i see the fastboot screen and than black screen and the phone goes back to the flashing CM logo.
Any thoughts?
Click to expand...
Click to collapse
do u have access to recovery?? if u have, then u can just flash previous build without wiping data..
Think if you press vol+ vol- and power and then use the button combo to boot into TWRP you will be fine, takes abit of messing to get it right.
http://en.miui.com/thread-277276-1-1.html
TRY THIS
saikatmitra71 said:
do u have access to recovery?? if u have, then u can just flash previous build without wiping data..
Click to expand...
Click to collapse
Did you try this solution? Did it work? Did you lose your apps/data?
Solved
Eventually managed to get onto twrp using adb (it was a bit of a statistical process... Didn't always work)
From there I just flashed cm 14.1 again, and it looks OK now
Thanks you all for the help!
Like I said earlier failed flash by CMxx doesn't overwrite TWRP, you can boot back into recovery just have to try a few times. Happened to me pressing both volume buttons and power switched phone off then I used button combo and it booted into TWRP.
Might have to grab a usb cable and use ADB to boot into fastboot. It happened to me and that was the only way for me.
seos83 said:
Might have to grab a usb cable and use ADB to boot into fastboot. It happened to me and that was the only way for me.
Click to expand...
Click to collapse
Don't worry Follow This one No fastboot, no edl, no test point, best way to Recover Xiaomi Device, prepare by me and 100% working {tested}
Hello Everybody! First of all sorry for my bad englisch.... I have a Honor 7 with TWRP 2.8.7.0 5.0-6.0 EN. It had the factory Firmware with EMUI 3.1 Now I ´ve searched in my Honor 7 update Program for new firmware and it found the PLK-L01_C432B380. After downloading it I´ve clicked on install. The phone has shut down and the TWRP has opened. Than it installed a couple of files and without any success Message the Phone turns off. Now I can´t turn it on. Not in Fastboot mode and not in Recovery Mode. I´ve i try to connect it to the PC or try to charge it the charging LED don´t work. Only if I press the Power Button for more than 10 seconds a short vibration comes but nothing happens. I have any changes to get the phone on? The Battery is fully loaded.
Thanks Guys
gremlin1987306 said:
Hello Everybody! First of all sorry for my bad englisch.... I have a Honor 7 with TWRP 2.8.7.0 5.0-6.0 EN. It had the factory Firmware with EMUI 3.1 Now I ´ve searched in my Honor 7 update Program for new firmware and it found the PLK-L01_C432B380. After downloading it I´ve clicked on install. The phone has shut down and the TWRP has opened. Than it installed a couple of files and without any success Message the Phone turns off. Now I can´t turn it on. Not in Fastboot mode and not in Recovery Mode. I´ve i try to connect it to the PC or try to charge it the charging LED don´t work. Only if I press the Power Button for more than 10 seconds a short vibration comes but nothing happens. I have any changes to get the phone on? The Battery is fully loaded.
Thanks Guys
Click to expand...
Click to collapse
Im in the same boat, and as far as i can get is to Hope for servicecenter replacement... Og did u get it to Work again?
HonorCasper said:
Im in the same boat, and as far as i can get is to Hope for servicecenter replacement... Og did u get it to Work again?
Click to expand...
Click to collapse
Hello Casper! Unfortunately I found no way to run the Phone. I´ve send it to Honor and got it back after only two days!! They changed the main board. Now everything works.
gremlin1987306 said:
Hello Everybody! First of all sorry for my bad englisch.... I have a Honor 7 with TWRP 2.8.7.0 5.0-6.0 EN. It had the factory Firmware with EMUI 3.1 Now I ´ve searched in my Honor 7 update Program for new firmware and it found the PLK-L01_C432B380. After downloading it I´ve clicked on install. The phone has shut down and the TWRP has opened. Than it installed a couple of files and without any success Message the Phone turns off. Now I can´t turn it on. Not in Fastboot mode and not in Recovery Mode. I´ve i try to connect it to the PC or try to charge it the charging LED don´t work. Only if I press the Power Button for more than 10 seconds a short vibration comes but nothing happens. I have any changes to get the phone on? The Battery is fully loaded.
Thanks Guys
Click to expand...
Click to collapse
just remember DO NOT install emui updates in twrp , never do that.. emui updates should be installed when you are not using twrp..
I endes Up sending mine to the store where i bought it and they changed the Main curciuit board..
Hello everyone !
I have a rooted, unlocked mi A3 with magisk and twrp everything worked fine but when i wanted to restart it, it goes to fastboot mode automatically...
I tried to fastboot reboot recovery, it boot in fastboot
If i type fastboot reboot, it goes to fastboot mode
If i press the power off button for 15 second it reboot to fastboot...
Do you have an idea how to repair this ? I don't car about loosing what is on my phone if necessary
EDIT: got some news if I set fastboot --setactive=a the phone boot correctly i can use it normally with no bug even reboot it without any problem
EDIT 2 : I solved the problem, i uninstalled magisk and everything was solved, I can get to recovery etc... Somehow magisk did something that my phone did not like
if I write fastboot setactive=b it bootloop
Thank you
it says unknown --setactive=a command
I also tried this method but system is says unknown --setactive=a command
I can't boot my mi a3.
Please help, me service center says motherboard is damaged.
It's cost 5600 Rs.
Help me please please..?????
Can you boot into twrp recovery? Turning off phone and doing power + volume up button. If yes you can try doing a factory reset.
vinod gupta said:
I also tried this method but system is says unknown --setactive=a command
I can't boot my mi a3.
Please help, me service center says motherboard is damaged.
It's cost 5600 Rs.
Help me please please..
Click to expand...
Click to collapse
Update your fastboot on the PC https://developer.android.com/studio/releases/platform-tools
I have this problem some days ago, i just change the active partition and every works as usual.
--Sorry for my bad English
vinod gupta said:
I also tried this method but system is says unknown --setactive=a command
I can't boot my mi a3.
Please help, me service center says motherboard is damaged.
It's cost 5600 Rs.
Help me please please..
Click to expand...
Click to collapse
Please read carefully: https://forum.xda-developers.com/mi-a3/how-to/rom-xiaomi-mi-a3-laurelsprout-t3962489
stuck on fastboot screen
I got a notification saying update to android 10 then I clicked ok it started to download and later installed after i cliked reboot i got a screen of fast boot and i cant do anything for it, i cant even reboot with volume up and power if i do anything i get same screen of fast boot
Kindly assist.
Mohsin
tikuff said:
Hello everyone !
I have a rooted, unlocked mi A3 with magisk and twrp everything worked fine but when i wanted to restart it, it goes to fastboot mode automatically...
I tried to fastboot reboot recovery, it boot in fastboot
If i type fastboot reboot, it goes to fastboot mode
If i press the power off button for 15 second it reboot to fastboot...
Do you have an idea how to repair this ? I don't car about loosing what is on my phone if necessary
EDIT: got some news if I set fastboot --setactive=a the phone boot correctly i can use it normally with no bug even reboot it without any problem
EDIT 2 : I solved the problem, i uninstalled magisk and everything was solved, I can get to recovery etc... Somehow magisk did something that my phone did not like
if I write fastboot setactive=b it bootloop
Thank you
Click to expand...
Click to collapse
mohsin.saboowala said:
I got a notification saying update to android 10 then I clicked ok it started to download and later installed after i cliked reboot i got a screen of fast boot and i cant do anything for it, i cant even reboot with volume up and power if i do anything i get same screen of fast boot
Kindly assist.
Mohsin
Click to expand...
Click to collapse
Are you bootloader unlocked?
stuck on fastboot screen
Sir to be honest i am not a software person and possibly wont understand what you said, but ill explain in detail what exactly happened.
First I had purchased Mi a3 with android 9 and later i got an update saying android 10 the phone was working absolutely fine.
Today i received another update which mentioned android 10 and as usual i updated it and when i restarted the phone i directly got that fast boot screen.
I went thru so many websites regarding this issue but did not find any solution and almost everywhere it said to flash the phone.
So i tried to flash the phone, I downloaded firmware, miflash tool, abd drivers, after doing all this my phone is not being detected on my pc, i checked device manager and even i got links from XDA as well i followed that as well but still no luck on detection.
Upon finding the query on detection issue i found solutions to debug from my device but my device is not starting up so i even cant do debugging as well.
Please help.
fabio_faria_23 said:
Are you bootloader unlocked?
Click to expand...
Click to collapse
mohsin.saboowala said:
Sir to be honest i am not a software person and possibly wont understand what you said, but ill explain in detail what exactly happened.
First I had purchased Mi a3 with android 9 and later i got an update saying android 10 the phone was working absolutely fine.
Today i received another update which mentioned android 10 and as usual i updated it and when i restarted the phone i directly got that fast boot screen.
I went thru so many websites regarding this issue but did not find any solution and almost everywhere it said to flash the phone.
So i tried to flash the phone, I downloaded firmware, miflash tool, abd drivers, after doing all this my phone is not being detected on my pc, i checked device manager and even i got links from XDA as well i followed that as well but still no luck on detection.
Upon finding the query on detection issue i found solutions to debug from my device but my device is not starting up so i even cant do debugging as well.
Please help.
Click to expand...
Click to collapse
Did you try to reset the phone using the recovery mode?
From switch off, press simultaneously for a few moments the Volume Up and Power Button.
you should enter in recovery mode and apply a factory reset.
this works for me
stuck on fastboot screen
I cannot enter the recovery mode when i press the buttons you said it again comes at fast boot screen and i tried to flash with mi flash tool but that flash process continuesly goes on and no changes in phone.
posy said:
Did you try to reset the phone using the recovery mode?
From switch off, press simultaneously for a few moments the Volume Up and Power Button.
you should enter in recovery mode and apply a factory reset.
this works for me
Click to expand...
Click to collapse
fastboot stuck
posy said:
Did you try to reset the phone using the recovery mode?
From switch off, press simultaneously for a few moments the Volume Up and Power Button.
you should enter in recovery mode and apply a factory reset.
hellow sir,
I have a rooted, unlocked mi A3 with magisk and twrp everything worked fine but when i wanted to restart it, it goes to fastboot mode automatically...
I tried to fastboot reboot recovery, it boot in fastboot
If i type fastboot reboot, it goes to fastboot mode
If i press the power off button for 15 second it reboot to fastboot...
Do you have an idea how to repair this ?
Click to expand...
Click to collapse
my mi a3 is stuck in the fastboot in the slot a, what should i do ?
swaraj123123 said:
my mi a3 is stuck in the fastboot in the slot a, what should i do ?
Click to expand...
Click to collapse
Unstuck it..?
But seriously, what kind of help do you expect? You haven't provided a single piece of information.
(this all happend 3 years ago and im asking now as i need a backup phone )
i flashed twrp and pixel experience well dum me clicked reset in pixel experience settings then it bootlooped into twrp for eternity now dum 2019 me thought that wiping twrp from fastboot would force it to boot into the system well it didnt work and even now whatever i try it does not boot (it just vibrates but will not boot i tried all combinations possible and also tried the miraclebox guide which didnt work)
Zainullahk1234 said:
(this all happend 3 years ago and im asking now as i need a backup phone )
i flashed twrp and pixel experience well dum me clicked reset in pixel experience settings then it bootlooped into twrp for eternity now dum 2019 me thought that wiping twrp from fastboot would force it to boot into the system well it didnt work and even now whatever i try it does not boot (it just vibrates but will not boot i tried all combinations possible and also tried the miraclebox guide which didnt work)
Click to expand...
Click to collapse
Try first charging the battery and installing the stock ROM (the latest) through SP Flash tool.
SubwayChamp said:
Try first charging the battery and installing the stock ROM (the latest) through SP Flash tool.
Click to expand...
Click to collapse
ill try that but i dont expect it to work due to it not booting
Zainullahk1234 said:
ill try that but i dont expect it to work due to it not booting
Click to expand...
Click to collapse
Well, this is the whole idea to flash a stock ROM, if it is an issue at software level it has to solve it. Check carefully some things that could help to diagnose the brick level, like device is vibrating, device can boot till bootanimation, logo is showing some letters and so on.
SubwayChamp said:
Well, this is the whole idea to flash a stock ROM, if it is an issue at software level it has to solve it. Check carefully some things that could help to diagnose the brick level, like device is vibrating, device can boot till bootanimation, logo is showing some letters and so on.
Click to expand...
Click to collapse
it wont do anything but vibrate when i hit the power button
Zainullahk1234 said:
it wont do anything but vibrate when i hit the power button
Click to expand...
Click to collapse
Try flashing the firmware and see what happens, and if, which modes are available for you, fastboot, recovery.