I only get custom firmware updates on my p20 lite.
I haven't updated my phone yet.
Current version: ANE-LX1 8.0.0.112 (C432)
New custom version: POLKOMTEL.PL 8.0.0.2 (CT)
Is there a way I can update my phone to normal firmware updates?
Is root required for this?
Will I need to backup my phone before I update to a normal firmware?
If so what is the best way to back up the phone, preferably where I don't sync to Google or another provider who likes to collect data like the contact list?
I am not using an SD card. My phone is a dual sim version
fruithat said:
I only get custom firmware updates on my p20 lite.
I haven't updated my phone yet.
Current version: ANE-LX1 8.0.0.112 (C432)
New custom version: POLKOMTEL.PL 8.0.0.2 (CT)
Is there a way I can update my phone to normal firmware updates?
Is root required for this?
Will I need to backup my phone before I update to a normal firmware?
If so what is the best way to back up the phone, preferably where I don't sync to Google or another provider who likes to collect data like the contact list?
I am not using an SD card. My phone is a dual sim version
Click to expand...
Click to collapse
Not a complete answer…
You can check with carful, without root, if you have Huawei firmware instead of firmware customized for your provider, read this thread (at your own risk).
What is the reason that I only get "new custom version" firmware updates?
Should I maybe unlock the bootloader and root the phone? Will this stop these "custom versions"?
fruithat said:
What is the reason that I only get "new custom version" firmware updates?
Should I maybe unlock the bootloader and root the phone? Will this stop these "custom versions"?
Click to expand...
Click to collapse
Your device is free or locked to mobile network operator?
kilroystyx said:
Your device is free or locked to mobile network operator?
Click to expand...
Click to collapse
At the moment it is not sim locked to one provider. I am using two sim cards from two different providers and both sim cards work.
I am afraid if I make the update it will either be sim locked, have some features disabled like WiFi Hotspot or it will get a lot of bloatware from POLKOMTEL.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fruithat said:
At the moment it is not sim locked to one provider. I am using two sim cards from two different providers and both sim cards work.
I am afraid if I make the update it will either be sim locked, have some features disabled like WiFi Hotspot or it will get a lot of bloatware from POLKOMTEL.
Click to expand...
Click to collapse
First this update is at least strange, if your device is SIMLOCK_DEACTIVE and Vendor Country is hw/eu like mine, the regular update expected should be B126 or B136.
This updated can fail, if not bloatware will be present as always but lock your SIM is hard to believe to me. If you are in the hw/eu with link from my last post you can try update to B136. Or you can try capture the link for POLKOMTEL firmware and share here and then I install in mine.
Edit, check in your if the feature Automatic system updates is enable.
When I first started using this phone I used it with a different sim card. As soon as I put the plus.pl simcard into the phone the custom update appeared.
It looks like this
The update did download and I got asked to restart the phone to install it. I never restarted the phone so it was never installed.
OEM unlock is off and automatic system updates are on
SIMLOCK Info: SIMLOCK_DEACTIVE
Vendor Country Info: hw eu
Fuse Info: Error
If you are interested in this custom firmware I can try capturing the link if you tell me how to.
fruithat said:
When I first started using this phone I used it with a different sim card. As soon as I put the plus.pl simcard into the phone the custom update appeared.
It looks like this
The update did download and I got asked to restart the phone to install it. I never restarted the phone so it was never installed.
OEM unlock is off and automatic system updates are on
SIMLOCK Info: SIMLOCK_DEACTIVE
Vendor Country Info: hw eu
Fuse Info: Error
If you are interested in this custom firmware I can try capturing the link if you tell me how to.
Click to expand...
Click to collapse
Your SIMLOCK is with same status as mine and Vendor Country too.
Yes, this update seems to be related to plus.pl sim card and maybe it appear because of automatic system updates are on.
If download already happened I'm not sure that you can capture, but you can try.
Generate a logcat file:
Code:
adb logcat > logcat.txt
logcat.txt file will be generated in the current directory, then search for a link that starts with:
Code:
http://update.hicloud.com:8180
I finally managed to get a normal firmware update.
The firmware finder app for Huawei didn't work. This was because the mobile provider firmware was higher than any real firmware. (8.0.0.200).
I couldn't find this custom firmware in logcat.
I disabled automatic system updates in developer options.
After that I went to - >settings - > APPS & notifications - > APPS - > system update
Here I pressed force stop
After that I went to Storage - > Clear Data
After this I went to the system update and the "custom firmware" was no longer there. Instead I received an official Huawei update!!!!
Also my mobile data was switched of while I was doing that. I only used WiFi. I don't know if that makes a difference.
Unfortunatelly Your measure steps are not working for me. In developer options i have automatic updates setting disabled and it only protects me that EMUI system update is nagging me with notification to make an update and not doing it behind my back.
Any official non branded updates are no longer appearing (ANE-LX1), only branded from my local operator. It seems any local custom operator update has higher priority over official ones (or operators have found an exploit to make their updates more important than official ones).
Clearing data of update apps is making things worse because the second step in protection from unwanted update is app privilege named phone (at least on my device) which has to be disabled and which is enabled by default. So each time i clear data of update app, this privilege returns to on state and allows app to start downloading update.
Finally, the only way to get official update is (on my end) to pull out sim card and restart phone.
I didn't point to this but my device is non branded one, bought in ordinary shop, not related to any operator or SIM card.
Related
Hi guys,
I’m currently facing issue with this phone where I can’t figure out how to turn off the auto answer on this device, please help!
Specs:
Phone Model: Blu g8, running in sc9863a
Rom: stock rom version - blu_G0170_V9.0.04.09_Generic 12-10-2019
Android pie (9)
Kernel version: 4.4.147
Non rooted device with locked bootloader
Here is my 3 month life story on this: I recently bought (in oct) this device from best buy (blu g8) deceived under the brand name blu v9, and brought this back with me to India to use it with local carriers. I have currently Jio and Airtel sims in this as it supports dual sim. The first thing i realize is this device isn’t supported by Jio network as it doesn’t turns on volte by default by the carrier and doesn’t registers this device as a 4g lte supported device. This was my 2 month project to try to figure out to make it work. Eventually after a lot of trial and errors, I found out through shortcut manager lite, there is a setting in gcf (for spreadtrum devices) under the name “gcf volte” upon clicking it, it forces the volte to turn on and then the network started to work for me.
This is where the problem lies, I tinkered soo much with this device beyond engineering mode (as the above setting isn’t visible in the EM app) that for some reason it turned on the auto answer feature via the gcf setting under the name “GCF RF” where all it shows is auto answer is: success.
Possible solutions: after all of this, I realized there was no other way to turn this off as the EM app always shows auto answer as off, turning it on and then off also doesn’t helps as still the phone gets picked up automatically in just one short ring (no bluetooth, no android auto, no special apps to stop or turn it on). I was left with no choice but to factory reset it. I did that, still the same issue. Even after FR on a stock rom, no google updates or even with updated google apps, this problem hasn’t gone till date.
I have also tried to root this device, take backups, tried to restore to another blu stock rom, but was never able to get it to working with any current solutions I researched for. Possibly its the spreadtrum version which none of these android softwares like spd, miracle thunder etc. supports. It always shows me the device drivers as connected but when ai invoke the spd or MT flash tools, it fails to detect the phone when it tries to connect to download the rom. Yes, the phone has authorization for the pc I’m trying to connect with and its a direct usb cable connection as I’m able to access the phone drive and sd card through my window pc. As you can see, I’m not the kind of person who doesn’t do their research and begs online for spoon feeding but in this case I’m leveled to do so. Please help experts, I’m new to Android Dev world.
My Ask: if you’re aware on how to stop the auto answer with above not included as your suggestion, please share. I also didn’t find the stock rom or the supported usb drivers with this current spreadtrum device and the pc software to work with it. I’ll need help with those too, if flashing is your option.
Thanks!
I also tried the “adb shell setprop persist.sys.tel.autoanswer.ms 0” command to set the auto answer off but no luck again
no as conseguido la solucion para el root
MOD Edit:
you have not got the solution for the root
Yes that is correct. I haven't been able to root this phone or unlock the bootloader still. (yes this is still me trying to work this phone).
How ever the auto answer has been resolved. I rest the phone to factory settings and used the Shortcut lite app to go to secrets codes for GCF Activity and turned on LTE setting (ONLY). This helped me turn on VOLTE function on this phone for my local JIO Provider.
HELP WANTED!: Still looking for ways to unlock the boot loader. The below is what I get when trying to use Fastboot commands:
F:\Android\platform-tools>fastboot devices
1070308019001034 fastboot
F:\Android\platform-tools>fastboot oem unlock
FAILED (remote: 'unknown cmd.')
fastboot: error: Command failed
F:\Android\platform-tools>fastboot flashing unlock
FAILED (remote: 'Not implemet.')
fastboot: error: Command failed
Click to expand...
Click to collapse
thydabiz said:
Yes that is correct. I haven't been able to root this phone or unlock the bootloader still. (yes this is still me trying to work this phone).
How ever the auto answer has been resolved. I rest the phone to factory settings and used the Shortcut lite app to go to secrets codes for GCF Activity and turned on LTE setting (ONLY). This helped me turn on VOLTE function on this phone for my local JIO Provider.
HELP WANTED!: Still looking for ways to unlock the boot loader. The below is what I get when trying to use Fastboot commands:
Click to expand...
Click to collapse
Hello friend. I recently got my phone into a similar situation with auto answer on, and it is really annoying. The auto answer function in Engineering Mode is disabled yet the problem persists. Apparently, I have tracked down the function that enabled the auto answer through the GCF ACTIVITY function, but it doesn't offer any way to disable it. Please help me with what you did to clears the problem in your case.
NOTE: my phone doesn't have the LTE capability so I can't turn it on like you said you did on yours.
Also, I have included two screenshots to give you an idea of the options that enable the problematic auto answer feature.
The first screenshot below outlines the initial gcf.gcfactivity,
The second screenshot shows the resulting menu from the first step above,
The third screenshot shows the aftermath of clicking the GCF RF option from the second screenshot above, which shows a dialog box outlining the features enabled by that final step with auto answer as one of them.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bravo N Justin said:
Hello friend. I recently got my phone into a similar situation with auto answer on, and it is really annoying. The auto answer function in Engineering Mode is disabled yet the problem persists. Apparently, I have tracked down the function that enabled the auto answer through the GCF ACTIVITY function, but it doesn't offer any way to disable it. Please help me with what you did to clears the problem in your case.
NOTE: my phone doesn't have the LTE capability so I can't turn it on like you said you did on yours.
Also, I have included two screenshots to give you an idea of the options that enable the problematic auto answer feature.
The first screenshot below outlines the initial gcf.gcfactivity,
The second screenshot shows the resulting menu from the first step above,
The third screenshot shows the aftermath of clicking the GCF RF option from the second screenshot above, which shows a dialog box outlining the features enabled by that final step with auto answer as one of them.View attachment 5938515View attachment 5938517View attachment 5938519
Click to expand...
Click to collapse
Hi My Friend. Welcome to the painful world of A BLU Phone owner . From all of my lessons learned with this one, the best answer is reset your device and this would go away or if you have a latest version available to install, upgrade the phone. Also, in your 3rd screenshot, the last option enables the volte function and this is what I do always. Goodluck!
thydabiz said:
Hi My Friend. Welcome to the painful world of A BLU Phone owner . From all of my lessons learned with this one, the best answer is reset your device and this would go away or if you have a latest version available to install, upgrade the phone. Also, in your 3rd screenshot, the last option enables the volte function and this is what I do always. Goodluck!
Click to expand...
Click to collapse
Thank you for the prompt reply, buddy. I think I will just reset the damn thing; I hope that is gonna help.
Regards,
BRAVO
Hi,
I managed to get the Android 11 update with a bit of stuffing around and thought I would share for everyone else, I did this on a unlocked Australian variant bought from Optus, you're mileage may vary.
This will activate dual sim mode on the phone with a single IMEI, I left my location set to Europe so it is upto you if you follow the last step to remove Dual Sim Mode.
You will need to backup anything you don't wish to lose as a full factory reset is required.
Requirements:
OPPO A72 - My bootloader is locked, My simlock is off
CPH2067_11_A.54 Latest European ROM for the device - Download Here: https://support.oppo.com/nl/software-update/software-download/?m=A72
Oppo Free Unlock Tool - https://forum.xda-developers.com/t/...de-to-coloros-11-and-enable-dual-sim.4191787/
A Google account to download ExpressVPN (This is the second last step so leave for now)
A Windows PC with a internet connection
WIFI or Mobile data on phone.
Latest ADB Drivers - https://adb.clockworkmod.com/
Instructions:
1) Backup all settings and user data.
2) Remove all accounts and screen lock security settings on phone.
3) Format all data, factory reset phone.
4) Download Oppo Free Unlock Tool from the link provided to PC.
5) Follow these instructions to install Microsoft Loopback Adaptor -
6) Open Device Manager and expand the Network Adapters category.
7) Find your Loopback Adaptor and double click it to open its properties.
8) Go to the Advanced tab and find the Network Address option in the Property pane.
9) Under the Value pane, select the radio button next to the text box and paste in the following: 704D7B61ABCD.
10) Install ADB Drivers.
11) Extract OPPO Free Unlock Tool, You're antivirus may give a false positive so you will have to manually add an exception for the tool.
12) Go to where you extracted the unlock tools. Open Sec5.exe.
13) Plug in phone via USB and select "Transfer Files".
14) Enable developer options on phone and activate USB Debugging.
15) Press Allow when prompted to give PC ADB access.
16) Open Sec5 window.
17) After about a second, a string of numbers and letters should show up in the left pane, Press Start Unlocking and few seconds later, "OK" should start flashing in the right pane.
18) Press stop unlocking and disconnect phone.
19) Open the phone app on your device and dial *#3954391#. Then dial *#391#. A screen should come up with a whole bunch of regions listed. (Take note of the one highlighted in green as you will need this in the final step).
20) Choose this one: "Europe EUEX" and click Ok you're phone will restart.
21) Download the rom from provided link to the phone and install through recovery mode.
22) Add your google account and download ExpressVPN from Play Store.
23) Open ExpressVPN and start 7 day trial then set to Netherlands server.
24) Goto Settings then Software Update and you will see Android 11 available to download.
25) Click Download then when complete Click Install
26) Remove Google Account from phone and factory data reset again.
27) Use instructions 12-20 to set your phones location back to your original setting.
That's All Folks
Hi! I'm from Germany.
I use Orbot and set the language to Dutch (Netherland). Then I went to Settings » Software Update. The new Android version 11 is now available. The version displayed is: CPH2067NV44_11_C.71
I have to consider installing this version as I don't know if it will lead to complications. Can I simply set the language to German in the settings? I don't have Windows at the moment and can only use Android tools. It is explicitly NV (Netherland Version) in the firmware version.
Whether that is EU or EUEX... no plan.
So far I haven't loaded the update either because I'm afraid that I will never get the "thing" to root.
Without root it's only half a smartphone, although I'm pretty happy with the A72.
Friendly greetings to everyone!
<-- དτ-νίરƲȘཌ --> ヾ(･ω･*)ﾉ
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
tvirushive3 said:
Hi! I'm from Germany.
I use Orbot and set the language to Dutch (Netherland). Then I went to Settings » Software Update. The new Android version 11 is now available. The version displayed is: CPH2067NV44_11_C.71
I have to consider installing this version as I don't know if it will lead to complications. Can I simply set the language to German in the settings? I don't have Windows at the moment and can only use Android tools. It is explicitly NV (Netherland Version) in the firmware version.
Whether that is EU or EUEX... no plan.
So far I haven't loaded the update either because I'm afraid that I will never get the "thing" to root.
Without root it's only half a smartphone, although I'm pretty happy with the A72.
Friendly greetings to everyone!
<-- དτ-νίરƲȘཌ --> ヾ(･ω･*)ﾉ
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Click to expand...
Click to collapse
Hi you can install the update and set your language on the initial setup screen for new rom. As for root i have been unable to root android 10 or 11 for this device. If you know of a way to root it would be great to learn from you
tvirushive3 said:
Hi! I'm from Germany.
I use Orbot and set the language to Dutch (Netherland). Then I went to Settings » Software Update. The new Android version 11 is now available. The version displayed is: CPH2067NV44_11_C.71
I have to consider installing this version as I don't know if it will lead to complications. Can I simply set the language to German in the settings? I don't have Windows at the moment and can only use Android tools. It is explicitly NV (Netherland Version) in the firmware version.
Whether that is EU or EUEX... no plan.
So far I haven't loaded the update either because I'm afraid that I will never get the "thing" to root.
Without root it's only half a smartphone, although I'm pretty happy with the A72.
Friendly greetings to everyone!
<-- དτ-νίરƲȘཌ --> ヾ(･ω･*)ﾉ
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
Click to expand...
Click to collapse
Wow..you are the best maaan..omg..updated to 11 right now with Tor..and all its fine thank you...and yes.. with Tor its x10 faster to update than how that guy uper wrote a big legend and to use pc and a lot of steps and software to download..... with Tor it very fast
Skerleton said:
Wow..you are the best maaan..omg..updated to 11 right now with Tor..and all its fine thank you...and yes.. with Tor its x10 faster to update than how that guy uper wrote a big legend and to use pc and a lot of steps and software to download..... with Tor it very fast
Click to expand...
Click to collapse
you can explain the procedure to me. I tried with orbit but it does not work. maybe because of the latest firmware 58 right?
No need for VPN anymore, just for Europe version.
Just got a system update tonight. Without needing to wipe the device.
'ColorOS 11.1 ~ Android 11' for the OPPO A72 ~ CPH2067_11_C.71
corkiejp said:
No need for VPN anymore, just for Europe version.
Just got a system update tonight. Without needing to wipe the device.
'ColorOS 11.1 ~ Android 11' for the OPPO A72 ~ CPH2067_11_C.71
Click to expand...
Click to collapse
Although the version I got from changing to Kazakhstan is 11_C.74
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
^^^ Also been offered that version as well now. 697mb update. Earlier version was updating from Android 10 & COS 7.
If we can Download the update and put it on the SD, Is it posible to upgrade in another regions?
CarnageHimura said:
If we can Download the update and put it on the SD, Is it posible to upgrade in another regions?
Click to expand...
Click to collapse
As yet im unable to get a rom file, will let you know if i can find one
today without vpn from France
Thank you for sharing
Thankyou for sharing this useful info
I am using pure safest and free vpn from https://vpnprofy.com/purevpn-alternatives/ for my mobile.. highly recommended
In the Xperia user group in
cafe.naver.com/x1smart
I'm HTCMAGE.
Last year, Xperia 1II.
How to activate VoLTE.
After the guide version,
VOLTE Success, Activation without Firmware Replacement (Sony Mobile withdrawal area)
Hello Xperia users! In the meantime, I finally solved the VOLTE problem! I approached Qualcomm's diagnostic port-active-efsExplorer and solved the problem by inserting a VOLTE profile from my carrier :) Sorry, this is Korea and I am Korean...
forum.xda-developers.com
5II and...
Xperia's 1III/5III products.
Activating VoLTE and...
"Root".
I'll share how to turn it off.
I am not good at English.
I use the translator.
Please understand.
https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader
Later, to unlock.
Maejiseukeu manager app.
Patch. magiskFiles img
While connected to your computer with a usb
You can use the instructions below at least adb.
adb reboot bootloader && fastboot flash boot "magisk.img" && fastboot reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then, you can install it.
It's going to rebooted.
This is the restart screen. It's connected to USB.
Always allow debugging when enabled.
Connect to Wi-Fi and do not log in.
Please move on quickly.
Turn off the internet quickly (Mobile data X)
Save the magisk manager app on your computer.
Then go to Xperia and install it.
github.com/topjohnwu/Magisk/releases/tag/v23.0
Please make sure the Internet is turned off.
I'll carry it out. Magisk Manager in the upper right corner.
Cogwheel - Setting page - Middle.
Activate "Hide".
When it's done, we'll start the VoLTE patch.
At least ADB.
Adb shell.
Enter and enter.
su
If you type it in,
In the same window as the picture below,
If you allow it,
The shape of the dollar...
It changes to #.
setprop persist.usb.eng 1
Enter and enter.
It's from My Computer Properties Device Manager.
There are several floating yellow exclamation marks.
Drive manually.
Please hold it.
Among the yellow exclamation points,
We don't know which part is connected.
Please select a few targets and update them manually.
Update Driver - Browse to My Computer
Directly select the list available on your computer.
Port-QUALCOM 9081 choice.
Starting with the ELS Explorer selection LAHA (based on 1 III).
This is something that can go in. If you connect...
Please copy and paste the EBS file.
(Use the mouse to pull it in and put it in twice.)
I'll make a folder that doesn't exist.
Put it in twice.
Policyman folder delete the existing one.
You can put it in and the NV at the top...
Likewise, place it at the top.
Close the window when done.
adb shell su -c setprop persist.dbg.volte_avail_ovr 1
adb shell su -c setprop persist.dbg.vt_avail_ovr 1
And then "adb reboot".
If you type Enter, we'll reboot you.
On the basic Soonjung phone app,
Check IMS status in *#*#4636#*
If it's available, it's good.
Wi-Fi or data on.
Log in various ways. Google, Sony accounts,
Update the Play Store and...
Various basic apps (Netflix)
Update everything.
And information on the bottom of the Play Store,
It should say play protection certification.
If you run the magisk manager app,
If you check out the following,
I reboot on my own.
Reboot and run the manager app again.
Please press "Remove the Magisk".
Completely removed.
Then I'll start deleting and reboot on my own.
Delete completed.
Finished.
It's easy to use.
Netflix is also on PlayStore.
It'll be updated normally.
root
If you maintain the route,
I change my font or record on the phone.
When you do the whole gesture, remove the bottom white stick.
That's one of the advantages.
You can choose Xperia.
The users can choose.
https://forum.xda-developers.com/t/...-mobile-withdrawal-area.4144701/post-83277123
In the old guide version,
My English skills that I'm not good at...
This person translated it.
Please keep in mind.
The EBS file (VoLTE file) is...
It's in Sony firmware.
In the country you're using,
All the mobile carrier files are in here.
You can use that.
It's in the policy man folder.
You must modify the XML file!
In the area that was withdrawn,
I don't have a mobile carrier band code.
Make sure to change it to a notepad.
If you change the XML file,
VoLTE, of course.
5G works normally, too.
My poor English skills...
Someone wise.
Please deliver it.
We wish.
Be happy always.
How can I get the efs file？
/system/vendor/firmware_mnt/image/modem_pr/mcfg/configs/mcfg_sw/generic
It's in the firmware or on the device
So you can either unlock BL & root to have VoLTE, VoWiFi, etc; or keep everything untouched to have Widewine DRM (Netflix HD etc), full camera filter support, etc?
There is just no middle ground, is there :-/
GOOD JOP
How about WiFi calling?
Hazzay88 said:
How about WiFi calling?
Click to expand...
Click to collapse
disabled by Sony
malikin said:
disabled by Sony
Click to expand...
Click to collapse
That's annoying that WiFi calling is disabled.
I hope Sony fix volte issues globally for the upcoming Xperia 1 IV. All other manufacturers such as Xiaomi don't have this issue even if it's a grey import. I don't see why Sony can't fix the problem
Hazzay88 said:
That's annoying that WiFi calling is disabled.
I hope Sony fix volte issues globally for the upcoming Xperia 1 IV. All other manufacturers such as Xiaomi don't have this issue even if it's a grey import. I don't see why Sony can't fix the problem
Click to expand...
Click to collapse
I think nothing will change.
Bofahad said:
I think nothing will change.
Click to expand...
Click to collapse
I will basically stop buying a Sony phone as simple as that.
Hazzay88 said:
I will basically stop buying a Sony phone as simple as that.
Click to expand...
Click to collapse
U can do like what i did (5G)
Bofahad said:
U can do like what i did (5G)
Click to expand...
Click to collapse
Battery consumption is higher with 5G.
What benefits do you get with 5G besides speed?
Hazzay88 said:
Battery consumption is higher with 5G.
What benefits do you get with 5G besides speed?
Click to expand...
Click to collapse
I am happy with 4G as it is more than enough for my general usage.
What I want Sony to basically fix is volte and WiFi calling as that is a deal breaker considering 3G network will be phased out.
If Sony don't fix volte issue then certain countries will not be able to buy the upcoming Xperia phones as it will no longer be able to make calls.
Hazzay88 said:
I am happy with 4G as it is more than enough for my general usage.
What I want Sony to basically fix is volte and WiFi calling as that is a deal breaker considering 3G network will be phased out.
If Sony don't fix volte issue then certain countries will not be able to buy the upcoming Xperia phones as it will no longer be able to make calls.
Click to expand...
Click to collapse
You can enable VoLTE by flashing SEA firmware without unlocking bootloader.
Bofahad said:
You can enable VoLTE by flashing SEA firmware without unlocking bootloader.
Click to expand...
Click to collapse
Yes I have volte working by flashing SEA firmware. Working in Australia on Vodafone only for the Xperia 1 II.
However I haven't heard anyone getting it to work on the current generation Xperia 1 III so that puts further Doubt on the upcoming Xperia 1 IV which would be enough to keep me away and look elsewhere instead. It's not possible to make calls it volte doesn't work and 3G network is shut down
Hazzay88 said:
Yes I have volte working by flashing SEA firmware. Working in Australia on Vodafone only for the Xperia 1 II.
However I haven't heard anyone getting it to work on the current generation Xperia 1 III so that puts further Doubt on the upcoming Xperia 1 IV which would be enough to keep me away and look elsewhere instead. It's not possible to make calls it volte doesn't work and 3G network is shut down
Click to expand...
Click to collapse
It's working with me.
Bofahad said:
It's working with me.
Click to expand...
Click to collapse
That's good to hear.
Which country and carrier are you with?
Also did you get it to work after flashing it with SEA firmware to get it to work
SIM Number SetterSIM Number Setter is a small Xposed module that invokes normally unused Android System code to set the "subscriber number" on the device's SIM card. This is the number displayed in the system settings, and used in apps such as Google Messages, as well as being available to third party apps with sufficient permissions.
The number is not always set by carriers (leaving "Unknown"), or can be lost or invalid after porting a number to a different SIM.
This small app allows you to fix it, permanently, using a rooted device with Xposed.
If you don't have a rooted device, or don't want to root your main device, you may wish to consider rooting an old device, and temporarily putting your SIM into that device, using this app, and then putting it back in your main device - the fixed number will travel with it
There are some older Xposed modules that do similar things to this, but they are all abandoned and use methods that will no longer work with changes to the platform since then. This module should keep working regardless as it does not store the number locally at all, instead immediately invoking the change - allowing the app to be uninstalled after use too.
Important NoticeChanging the SIM number is semi-permanent: the number change will survive reboots, uninstalling this app, even switching the SIM to a different device, but can be changed again at any time using this app.
SIM Number Setter does NOT:
Change your actual phone number, no matter what you enter. You must contact your carrier if you wish to port your number or switch network.
Unblock a network blocked SIM.
Give you free data or calls.
Change your IMEI.
SIM Number Setter uses the built-in Android methods to write data to the SIM. The app nor the developer are not responsible for issues with the process, including any damage to the SIM or network issues.
Screenshots
DownloadDownload from the GitHub releases page
Source Code
GitHub
It works perfectly fine with LSposed too!!
Thanks a lot!
Ohh, FFS! If you have dual SIM, just switch them, change its number and switch them back! Not a big deal!
@Quinny899 Thanks for this! Is there a defined format in which the phone number should be entered? For example, +[Country Code][10 Digit Mobile Number], or 00[Country Code][10 Digit Mobile Number], something like that?
shadowstep said:
@Quinny899 Thanks for this! Is there a defined format in which the phone number should be entered? For example, +[Country Code][10 Digit Mobile Number], or 00[Country Code][10 Digit Mobile Number], something like that?
Click to expand...
Click to collapse
Anything should work, so long as it's 20 chars or less and uses only numbers or +
works perfectly as described, in case of dual SIM just temporarily change the position to SIM1
brenosnt said:
works perfectly as described, in case of dual SIM just temporarily change the position to SIM1
Click to expand...
Click to collapse
I concur! working wonderfully on Android 12 Beyond Rom (Note 20 Ultra)!!
Quinny899 said:
Anything should work, so long as it's 20 chars or less and uses only numbers or +
Click to expand...
Click to collapse
Doesn't work for me, unfortunately. Could be because of OxygenOS (read all the issues, open and closed, in your GitHub repository and checked everything) but I'm not sure. Thanks nonetheless!
rgavioli said:
It works perfectly fine with LSposed too!!
Click to expand...
Click to collapse
Can u help me, I'm getting failed to connect to the Xposed service.
Already have LSposed zygisk installed and I enabled module.
Running android 12
fardeenah said:
Can u help me, I'm getting failed to connect to the Xposed service.
Already have LSposed zygisk installed and I enabled module.
Running android 12
Click to expand...
Click to collapse
Which Android 12 firmware on what device?
Quinny899 said:
Which Android 12 firmware on what device?
Click to expand...
Click to collapse
Running AEX aospextended on redmi note 5 pro
fardeenah said:
Running AEX aospextended on redmi note 5 pro
Click to expand...
Click to collapse
There's a report on GitHub of someone with a phone that came with MIUI doing the same thing, I suspect there's something different on those devices. Not a lot I can do without having the device to debug, as the logs don't show anything.
F
Quinny899 said:
There's a report on GitHub of someone with a phone that came with MIUI doing the same thing, I suspect there's something different on those devices. Not a lot I can do without having the device to debug, as the logs don't show anything
Click to expand...
Click to collapse
I really wish I could change that sim number. Man....
Such a bummer.
Make sure the module is enabled on LSposed.
Also, make sure Phone services is selected at the module.
Reboot your device and try again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rgavioli said:
Make sure the module is enabled on LSposed.
Also, make sure Phone services is selected at the module.
Reboot your device and try again.
View attachment 5543693
Click to expand...
Click to collapse
I did but it's not working for me.. What device are you running btw? Are u using the latest version of LSposed
fardeenah said:
I did but it's not working for me.. What device are you running btw? Are u using the latest version of LSposed
Click to expand...
Click to collapse
I've tested on Samsung S20, Xiaomi Mi11i and it works fine.
LSposed 1.7.2 (6379)
You could try cleaning the data from this app.
Thank you for this. I just ported my Mobile Number to another network and got a unknown number on about phone.
Just a question. Is the write procedure single use?
Can you re-write the field if you transfer numbers, or misstype, or, or or?
AndStuff said:
Just a question. Is the write procedure single use?
Can you re-write the field if you transfer numbers, or misstype, or, or or?
Click to expand...
Click to collapse
You can rewrite it as many times as you like, though I'd recommend trying to keep usage low as I doubt SIMs are designed for this data to be rewritten often. If you make a typo you can fix it though.
Hi everyone! This is my first topic.
I just got a Xiaomi MI 10, and after a feel sucessfull updates I'm having troubles with this one... V12.2.6.0.RJBMIXM
The notification about the updated appears from time to time, and, after I click to download the file, I try to install it and keep receiving the error: "Couldn't update Verification problem". I keep clicking "Try Again" but it failes every single time and it's annoying that phone is reminding me to update every time.
Googling about it, I found this forum and saw that this update that my phone is trying to get, is a rolled back one.
So, what and how can I do it to get an recent update for my phone if I keep only getting this one that's rolled back? I never have updated an android phone manually, just used the official ROM's that's been sended to me by "official channels".
Download: MIUI 12 stable update rolling out to several Xiaomi, Redmi and POCO devices
MIUI 12 stable builds have begun rolling out to several Xiaomi, Redmi, and POCO devices. Head on over for Recovery ROM and Fastboot ROM download links!
www.xda-developers.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The error (It's in portuguese):
I founded a translated version from someone on google's forum with the same problem in 2022
Try:
Cannot manual update
Hi all, I do not seem to have the three dots in the upper right corner when going to Settings / About phone / MIUI Version. I wonder why is that?
forum.xda-developers.com
NOSS8 said:
Try:
Cannot manual update
Hi all, I do not seem to have the three dots in the upper right corner when going to Settings / About phone / MIUI Version. I wonder why is that?
forum.xda-developers.com
Click to expand...
Click to collapse
Didn't work , hours later the notification reappeared...
But thanks for your help!
Try to install it manually:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
If you want to try manually your bootloader should be unlocked
You need pc with adb drivers
"Mi unlock" for unlocking bootloader
"Mi flash" to flash any rom of your choice
mong786 said:
If you want to try manually your bootloader should be unlocked
You need pc with adb drivers
"Mi unlock" for unlocking bootloader
"Mi flash" to flash any rom of your choice
Click to expand...
Click to collapse
Nope, you can use the updater provided you respect the order of the versions.
What is not possible to downgrade.
NOSS8 said:
Nope, you can use the updater provided you respect the order of the versions.
What is not possible to downgrade.
Click to expand...
Click to collapse
He is getting error with updater in device
& If your bootloader is unlocked, you can also downgrade with little trick of editing mi flash script
I did that many times on my mi 10 (umi)
mong786 said:
He is getting error with updater in device
& If your bootloader is unlocked, you can also downgrade with little trick of editing mi flash script
I did that many times on my mi 10 (umi)
Click to expand...
Click to collapse
I know, I was talking about downgrading with the updater.
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
WinterJr said:
Didn't work , hours later the notification reappeared...
But thanks for your help!
Click to expand...
Click to collapse
You can try to do a factory reset (your data will be erased), it sometimes works.
Thank you all for helping me! I'll try this procedures later on and come back with the results.
Doing the manual installation of one of those rom's, my data will be erased? There's a way to do it without erasing all? Should I download and install only the version thats with error? (V12.2.6.0.RJBMIXM) Or should I download and install the latest version available for my device?
[MIUI Updates Tracker] Mi 10 (umi)
MIUI Updates Tracker (Mi 10) What is MIUI Updates Tracker? An open-source project that automatically tracks Xiaomi MIUI ROM releases! MIUI Updates Tracker is a sibling project of Xiaomi Firmware Updater. Actually, XFU depends on it for getting...
forum.xda-developers.com
Chose INCREMENTAL UPDATE
Package Name: miui_UMIGlobal_V12.2.6.0.RJBMIXM_2bd819937d_11.0.zip
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Updater: 3 dots at the top right / select file
(will not erase your data).
NOSS8 said:
Chose INCREMENTAL UPDATE
Package Name: miui_UMIGlobal_V12.2.6.0.RJBMIXM_2bd819937d_11.0.zip
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Updater: 3 dots at the top right / select file
(will not erase your data).
Click to expand...
Click to collapse
I've downloaded the version you pointed, but I didn't find the option to select the file on the updater... Do you have any tips?
I screen recorded to show the options available for me.
New video by Antonio Winter (Junior)
photos.app.goo.gl
WinterJr said:
I've downloaded the version you pointed, but I didn't find the option to select the file on the updater... Do you have any tips?
Click to expand...
Click to collapse
Tap on the Miu12 logo several times.
Have you tried download latest package(3 points)?
Thanks! The option appeared after clicking the logo several times . I'll try to update using the INCREMENTAL UPDATE file later this day.
Have you tried download latest package(3 points)?Yes, several times... Its shows the error: "Can't download update Wait a minute or two and try again". On the video that I posted on my last reply I did tried again, returned the same error .
Before I came to this forum, I exchanged some emails with the official xiaomi support ([email protected]) and did some testing with this option several times, on different days and different time periods... After these tests (and some others) failed to resolve my issue, the support from Xiaomi suggested that I should bring my device to my local service center for further assistance. But my country doesn't have any official service centers, and I would have to return my device to my dealer to try to use my warranty...
So here we are
Thanks! The option appeared after clicking the logo several times . I'll try to update using the INCREMENTAL UPDATE file later this day.
If the same, perform a factory reset.
NOSS8 said:
Thanks! The option appeared after clicking the logo several times . I'll try to update using the INCREMENTAL UPDATE file later this day.
If the same, perform a factory reset.
Click to expand...
Click to collapse
Tried to install the incremental update through the downloaded file and ended up with this error: