[ROM][8.1.0][SM-G360H/HU] LineageOS 15.1 for Samsung Galaxy Core Prime - Samsung Galaxy Core Prime ROMs, Kernels, Recoverie

LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. Lineage does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
RIL [partially]
WiFi
Bluetooth
HW video codecs
Almost any other hardware stuffs are working properly
BUGS/Not working :
Offline charging doesn't work
Camera [nearly unusable at all]
RIL [crashes while choosing network provider on 3G signal]
[Using STK makes RIL crash also]
WiFi Direct/hotspot doesn't work
First time installing LineageOS 15.1 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery MUST USE VERSION 3.2.1-0 OR ASSERT ERROR OCCURS
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
NOTE: First boot might take long time, due to deodexed build, so don't consider bootloop!!
Upgrading from an older build of this ROM
Wipe system partition, wipe dalvik-cache but not data partition
Optionally install Google Apps (GAPPS) (link above)
[NOTE]:
If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
This is Android Go build, which is "optimized" for devices with lower than 1GB RAM, so don't expect full features like older Android versions [should we need ordinary build also?]
DOWNLOADS:
Click to expand...
Click to collapse
ALPHA-2: Drive link
Want some screenshots? Get them in Screenshot tab above
XDA:DevDB Information
LineageOS 15.1, ROM for the Samsung Galaxy Core Prime
Contributors
remilia15
Source Code: https://github.com/remilia15?tab=repositories
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.4
Based On: LineageOS
Version Information
Status: Alpha
Created 2018-06-30
Last Updated 2018-07-08

Reserved

Reserved

Pro

Thug

Pro rom sir when android P for sprd ?

Awesome. what a pleasant surprise!

dev_harsh1998 said:
Pro rom sir when android P for sprd ?
Click to expand...
Click to collapse
Already here, but we found it bugless so remilia had to add some bugs to make it fun

thanks for this hard work.....the rom is awsome but the major bug is making calls .....will be any fix soon ??

vahmed2090 said:
thanks for this hard work.....the rom is awsome but the major bug is making calls .....will be any fix soon ??
Click to expand...
Click to collapse
Yeah it will be this is just first alpha

good job the rom is awsome ........ but will be any fix for the calls soon??

Ooohhh weeeee! Oreo is on! Thanks remilia!

vahmed2090 said:
good job the rom is awsome ........ but will be any fix for the calls soon??
Click to expand...
Click to collapse
Remember: asking doesn't make things possible
There will be fixes, but not soon. Probably 69 years later then
Sent from my Xperia Z1 using XDA Labs

remilia15 said:
Remember: asking doesn't make things possible
There will be fixes, but not soon. Probably 69 years later then
Sent from my Xperia Z1 using XDA Labs
Click to expand...
Click to collapse
What is 69 years ? "Bựa quá nha"

tnkhai said:
What is 69 years ? "Bựa quá nha"
Click to expand...
Click to collapse
hi bro

Hi. I tried aosp rild and libril. But rild will crash later. Do you got that?

ngoquang2708 said:
Hi. I tried aosp rild and libril. But rild will crash later. Do you got that?
Click to expand...
Click to collapse
Can I have log?
Sent from my Xperia Z1 using XDA Labs

Wow. Nice ROM, wait update. Thanks!

Cherifiali said:
Already here, but we found it bugless so remilia had to add some bugs to make it fun
Click to expand...
Click to collapse
When will the Oreo rom be available for sm-g361h

ALPHA-2 is up! Changes:
Fixed calls, mobile data switch (thanks to @ngoquang2708)
Updated security patch to 5th July
Fixed video codecs/screen recording
YouTube videos now playable
Download link is updated in OP! Please don't quote this post, as it'll be changed when needed
Buglist is also updated in OP. Please check before you download!

Related

[ROM][I9100][5.1.1][OFFICIAL] CyanogenMod 12.1 Nightly Builds

CyanogenMod 13 nightlies started, checkout its thread!​
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 Lollipop, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review.
IMPORTANT INFORMATIONS
- Root is now disabled by default on CM12.1. To enable it go to Settings>Developer Options>Root access and set to Apps only or Apps and ADB.
- CyanogenMod 12.1 comes with Cyanogen Recovery by default, if you don't like it you can flash alternative recoveries using IsoRec
I'll not support users and answer questions from users which:
- Are running a custom kernel
- Have flashed mods
- Modified system files
- Didn't follow my instructions
- Are unfriendly
Official CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/I9100_Info
Known Issues: http://wiki.cyanogenmod.org/w/Known_Issues_page_for_i9100
Changelog: http://www.cmxlog.com/12.1/i9100
First time installation instructions:
Download CM-12.1-XXXXXXXX-NIGHTLY-i9100.zip to your sdcard
Make sure you're using a Kitkat Compatible Recovery
Boot into Recovery
Wipe all your data
Flash CM-12.1-XXXXXXXX-NIGHTLY-i9100.zip from sdcard
(Optional)Flash Google Apps.zip from sdcard
Reboot
CM12.1 official nightly builds:
http://download.cyanogenmod.org/?device=i9100
Recommended Google Apps:
http://forum.xda-developers.com/android/software/tk-gapps-t3116347
Choose Pico version to fit in the /system partition.
If you like my work, consider making a small donation ​
​
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy S II
Contributors
Lysergic Acid
Source Code: https://github.com/CyanogenMod
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Kitkat Compatible Recovery
Based On: AOSP
Version Information
Status: Nightly
Created 2015-07-01
Last Updated 2016-02-04
Reserved
Thank you for the hard work Lysergic and congratulations for the success so far.
...
Update from latest Unofficial to first Official through OTA was unsuccessful. Now flashing from CM Recovery and will flash GAPPS as the Google services are not working after the OTA update.
edit: gapps still not working after flashing official build + gapps from recovery. Any chance to fix it without factory reset?
Solution: "you can clear the play services data to fix that"
---
update: I got better performance with the first official build compared to the latest unofficial.
Reserved
Congratulations LA.
Hope users will provide useful feedbacks and logcats in this thread to help you make this rom even better.
Cheers !
Congratulations
Finally your Hard Work Paid it off.
Congratulations Lysergic Acid!
there is a way to fix the crashing gapps but it will take mashing the screen to get there just wipe the gapps services data and that fixed it for me.
abdulhkeem said:
there is a way to fix the crashing gapps but it will take mashing the screen to get there just wipe the gapps services data and that fixed it for me.
Click to expand...
Click to collapse
Thanks a lot @abdulhkeem, it worked and this saved me a lot of time. :good:
My phone seems very hot under the camera, expecially when leaved attached to AC power... much more than on KK...
I made all the possible wipes/formats and checked with betterbatterystats but I cant find anything strange...
Thanks so much for this @Lysergic Acid!
I have been following since November last year and all I can say is what an amazing achievement!
Congrats to you and all the great devs that helped you get to where you are now.
Can't wait to see what is to come with the official tag on the ROM now.
Regards,
Jleoz.
lost root
Looks like I lost root with the official build. Yes, the root access is enabled in dev options. Tried rebooting, disable-enable, re-flash, still does not have root.
essenov said:
Thank you for the hard work Lysergic and congratulations for the success so far.
...
Update from latest Unofficial to first Official through OTA was unsuccessful. Now flashing from CM Recovery and will flash GAPPS as the Google services are not working after the OTA update.
edit: gapps still not working after flashing official build + gapps from through recovery.
Any chance to fix it without factory reset?
Click to expand...
Click to collapse
As already said, you can clear the play services data to fix that, but I'm working on a fix for the backup tool.
Can't wipe data
I'm unable to wipe data/factory reset from the new cyano recovery. Same thing if i try wiping from settings, is someone having same issue?
@Hazard- Me too, but also I can`t install any *.zip package.
it says unable to open efs/metadata (more or less). I thought efs folder is untouched on wipe, isn't it?
No APN data available so mobile data can't also be enabled.
Nice!
Great work @lysergicacid !! REALLY THANKS!!!
Now I can only hope, that my S3 will also get Official.
I have just written to @JustArchi , would you tell him what you have done to get official? Thanks!
kostelo said:
No APN data available so mobile data can't also be enabled.
Click to expand...
Click to collapse
Same here, but just search for carrier configuration and create an APN yourself, it's easy!
Dr.Fix said:
Same here, but just search for carrier configuration and create an APN yourself, it's easy!
Click to expand...
Click to collapse
I know my man. I already have. I 'm just reporting the bug in case it was missed.

[ROM][Official][Nightly]CyanogenMod 13.0 for Huawei G620S, Honor 4/4x

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Official CyanogenMod Wiki:http://wiki.cyanogenmod.org/w/Main_Page
https://wiki.cyanogenmod.org/w/Cherry_Info
Important information:
This thread is for official CyanogenMod 13.0 builds for Huawei C8817D, C8817E, G620S, G621, Che1_CL10, Che1_CL20, Che1_L04. The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Supported device:
C8817D
C8817E
G620S-UL00
G620S-L01/L02/L03
G621-TL00
Che1_CL10
Che1_CL20
Che1_L04
Baseband requirement:
If you can't hang up, install this baseband via TWRP and it should be solved.
Known bugs:
No NFC support
Other minor bugs
TODO:
Calibrate battery capaticy display(currently not precise)
[*]Add blink support to notificiation light--->done
Stability related development
Enable doze mode(currently it's buggy, will freeze your phone, Google, when will you fix it?)
Add NFC support(as long as Qualcomm released source code for QCA1990)
Installation:
First time flashing CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery, e.g., my TWRP: http://forum.xda-developers.com/android/development/recovery-twrp-3-0-0-0-touch-recovery-t3309504
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Optional: Install the Google Apps addon package
Reboot
Source code:
https://github.com/cyanogenmod
Credits:
CyanogenMod Team
Code Aurora Forum
@surdu_petru Started M hacking, fixed lots of bugs
@desalesouche Did lots of sensors related hacking&experiment
@Blefish Started kernel development, code reference
@paranoia_gu Add Honor 4x support
......
Download:
http://get.cm/?device=cherry
XDA:DevDB Information
CyanogenMod, ROM for all devices (see above for details)
Contributors
dianlujitao, surdu_petru, desalesouche, paranoia_gu
Source Code: https://github.com/cyanogenmod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Nightly
Created 2016-02-10
Last Updated 2016-03-19
Changelog:
16/2/10:
First release
16/2/11:
Support led blink mode
16/2/12:
Fix for FM reinitialisation
Optimize power for FM
16/2/22:
Disable dexpreopt (for better compatibility with xposed)
Fix "####" operator name
16/3/5:
Fix blue screen flashing on video playback
16/3/6:
Remove Qualcomm location stack
@dianlujitao,wait for the honor 4x (che1-cl1) version.
@dianlujitao
great job ! many thank,a greeting !
Does the gyroscope? Since some time ago was discovered that the G620s has.
Sorry my english.
Can this be installed on Honor 4x - Che1-L04?
I received notification in cm updater on che1-L04 about cm13 update. But on this thread as posted it seems it is not yet ready for Honor 4x - Che1-04. Please @dianlujitao put some light on this. And do let us know when you plan to release cm13 for Che1-L04. Thank You. You are Awesome.
rajattrt said:
I received notification in cm updater on che1-L04 about cm13 update. But on this thread as posted it seems it is not yet ready for Honor 4x - Che1-04. Please @dianlujitao put some light on this. And do let us know when you plan to release cm13 for Che1-L04. Thank You. You are Awesome.
Click to expand...
Click to collapse
Never. I don't own that device and can't gurantee the reworked kernel working well on that device. If someone can maintain your device, I'm glad to merge his code.
The TWRP 3.0.0.0 fails (error code 70) to install gapps, installed ROM and gapps (open / pico) with TWRP 2.8.7.0 and installed smoothly.
edit : the end I could install the Gapps with TWRP 3.0.0.0 !!! Fixed !!!
Nice one! Hope browser works flawless. Can you please provide us kernel that allows higher CPU and GPU frequiencies?
custon3 said:
The TWRP 3.0.0.0 fails (error code 70) to install gapps, installed ROM and gapps (open / pico) with TWRP 2.8.7.0 and installed smoothly.
edit : the end I could install the Gapps with TWRP 3.0.0.0 !!! Fixed !!!
Click to expand...
Click to collapse
Did you use Open gapps? What date of release?
Sent from my SM-N9005 using Tapatalk
I have problem, when i lock and unlock mobile, i can't use to touchscreen.. In device G620S-L01
Btw. I replacement digitizer.
ReDuXX528 said:
Nice one! Hope browser works flawless. Can you please provide us kernel that allows higher CPU and GPU frequiencies?
Click to expand...
Click to collapse
overclocks aren't allowed
Hello,
Yesterday I flashed nightly 12/02. Battery drains 5% per hour during night with no usage. I had the same experience with cherry 06/02 Rom. With Surdu's Rom 07/02 battery lasted for almost 4 days normal usage. I use TWRP 2.8.7.0 from surdu.
Thank you for your work.
Sent from my SM-N9005 using Tapatalk
@dianlujitao, is there any plan to port the rom to Huawei honor 4x che1- cl10?
When will this update be available for cherry device like honr 4x che1-L04
romanticky said:
Hello,
Yesterday I flashed nightly 12/02. Battery drains 5% per hour during night with no usage. I had the same experience with cherry 06/02 Rom. With Surdu's Rom 07/02 battery lasted for almost 4 days normal usage. I use TWRP 2.8.7.0 from surdu.
Thank you for your work.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
In nightly 3 or 4 cores are always active. In surdu's Rom only 1 core.
Sent from my SM-N9005 using Tapatalk
romanticky said:
In nightly 3 or 4 cores are always active. In surdu's Rom only 1 core.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
No.
juandercito said:
No.
Click to expand...
Click to collapse
After I flashed the latest nightly with full wipes including internal SD, only 1 core is working. But if I have Location/Mode/High accuracy then again 3 or 4 cores are working. Switching to Only device corrects it.
Support for Honor 4x - Che-L04
dianlujitao said:
Never. I don't own that device and can't gurantee the reworked kernel working well on that device. If someone can maintain your device, I'm glad to merge his code.
Click to expand...
Click to collapse
I am trying to build cm-13 for honor 4x but it gives me build errors. Can you help me with it?
rajattrt said:
I am trying to build cm-13 for honor 4x but it gives me build errors. Can you help me with it?
Click to expand...
Click to collapse
I don't think you're able to port a functional kernel for your device, because you can't even deal with build errors.

[ROM][5.1.1][SM-G531H/BT]CyanogenMod 12.1 for Samsung Galaxy Grand Prime VE

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working?
Wifi (connection, tethering, etc)
Bluetooth
RIL (SMS, Mobile data, Calls) [dual-SIM]
Camera
Video codecs
Storage (both internal and external)
MTP storage (both internal and external)
zRAM (compressed-RAM swap)
GAPPS
USB OTG
Tethering (USB, Wifi, Bluetooth)
Sound recording
Torch (flashlight)
BUGS/Not working:
Weird sound when using loud speaker while calling
GPS doesn't work
Recorded videos through camera produces wrong color
Offline charging doesn't work
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy Grand Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
MULTITASKING TEST:
DOWNLOADS:
Click to expand...
Click to collapse
ALPHA-1: Link
ALPHA-2: Link
ALPHA-3: Link
BETA-1: Link
Want some screenies? Get them from Screenshot tab
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy Grand Prime
Contributors
doesntexits
Source Code: https://github.com/koquantam/android_device_samsung_grandprimeve3g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2016-10-10
Created 2016-09-28
Last Updated 2016-10-11
F.A.Q
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G531BT
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can i use your ROM as a base for portings?
A: Yes, you could, but give proper credits
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
CHANGELOG
ALPHA-1: Initial release
ALPHA-2: Post #21
ALPHA-3: Post #62
BETA-1: Post #145
I test it and repoet
Sent from my SM-G531H using Tapatalk
@doesntexits I test it
worked perfectly
please fix wifi bug please please
Sent from my SM-G531H using Tapatalk
tanks
Already it has much time with bugs such those of the first generation and has two stable cm 13 and up wing cm 14 (even with bugs) nosotro any and cm 12.1 faulty even: / good play wait thanks for keep working on it
mamadrahimi8 said:
@doesntexits I test it
worked perfectly
please fix wifi bug please please
Click to expand...
Click to collapse
Does mobile data work ?
ciel phantomhive said:
Does mobile data work ?
Click to expand...
Click to collapse
yes
Sent from my SM-G531H using Tapatalk
@doesntexits please build a wifi fixer.zip and upload it or build a kernel with wifi working
Sent from my SM-G531H using Tapatalk
Installed, it worked but is not receiving calls, making only, GPS is working, these bugs were that I realized ... porfavor send an update corigindo them ... You did an excellent job.
It all worked eagerly await the fix. We here at Brazil like almost all the group settled and quite bothered the bug wifi. beautiful work
Thank you!
I would like that this model don't forget, I think that is so injust that "all" roms will be designed for grand prime g530h. I think that this comunity is for all, and would like that more roms will be avaliable for this terminal. Sorry, I don't speak english very well.
Wow finally a rom for SM-G531H..... Gonna test it on my device. Good work bro :victory:
It seems that I cant receive call. Auto rotate also won't work.
naimrlet said:
It seems that I cant receive call. Auto rotate also won't work.
Click to expand...
Click to collapse
Yes, and they're all mentioned in OP buglist
doesntexits said:
Yes, and they're all mentioned in OP buglist
Click to expand...
Click to collapse
Opps I didnt read the post correctly. Sorry :silly:
Work or Not ?
Someone sent me this
plz fix bootloop on restartng issue soon
@doesntexits please fix wifi bug
Sent from my SM-G531H using Tapatalk
mamadrahimi8 said:
@doesntexits please fix wifi bug
Click to expand...
Click to collapse
Don't rush him :highfive:
Hardwork requires time :good:

[ROM][5.1.1] CyanogenMod 12.1 for Samsung Galaxy Core Prime VE

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
What's working
Everything except some bugs .
What's not working
Recorded videos through camera produces wrong color
Installation Instructions
Download and put the ROM zip in your phone.
Go to recovery, wipe data/cache.
Flash ROM.
(Optional) Flash gapps.
Reboot.
Enjoy.
Download:
CyanogenMod 12.1 Alpha 1
CyanogenMod 12.1 Beta 1
CyanogenMod 12.1 Beta 2
Gapps
Source:
https://github.com/DreamStar001
XDA:DevDB Information
CyanogenMod , ROM for the Samsung Galaxy Core Prime
Contributors
Dreamstar
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2017-01-03
Reserved
I have a question. I read on phonearena.com that the phone I own (sm-s820l), is the same model as the core prime value edition. That being the case, would it be possible that this cyanogenmod would work with it? Sorry if this is a dumb question, I was just curious.
Maybe that's why I couldn't find your phone model in sammobile.com.
Take a moment thanks the OP for his hard work. We had no developer to develop for our device and OP made it possible.
Soon you'll get everything fixed!
hydroman202 said:
I have a question. I read on phonearena.com that the phone I own (sm-s820l), is the same model as the core prime value edition. That being the case, would it be possible that this cyanogenmod would work with it? Sorry if this is a dumb question, I was just curious.
Click to expand...
Click to collapse
Not sure
A new build is up. Follow the download link in OP to get it.
Changelog
Working :
Audio is working now (microphone, speaker)
Multimedia playback working
System detects SIM card properly. ( Dual sim , mobile data, calling, etc )
Storage is now working ( both internal and external )
Camera is now working ( Both front and rear camera work as expected now )
MTP it maybe fixed ( need confirmation )
Fixed issue with WiFi and bluetooth MAC addresses
Wifi is stable now
Various other fixes ( file access permissions, kernel tweaks )
Not Working:
Currently the system does not show the mobile connection as active, but it still run
Calls not receiving & also calls not hanging up
Little lag in animations for 2 seconds after clearing recents
Beta 2 is up. Follow the download link in OP to get it.
Changelog
Working :
Completely fixed RIL using our own RIL class. Now you can receive Calls/incoming calls and hang up.
[*]Fixed USB OTG ( thanks to @doesnexits )
Fixed GPS ( Still need confirmation )
Not Working:
Offline charging doesn't work
[*]Recorded videos through camera produces wrong color
Awesome ROM but i only have one problem , i can't change the app drawer style , i don't really like the list style :/ , other than that it's really awesome
EDIT: also screenshot shortcut isn't working :/ or am i missing something?
ETheHedgehog said:
Awesome ROM but i only have one problem , i can't change the app drawer style , i don't really like the list style :/ , other than that it's really awesome
EDIT: also screenshot shortcut isn't working :/ or am i missing something?
Click to expand...
Click to collapse
If you want to change the drawer style then I recommend you to use Nova Launcher and if you want to take screenshots long press on power key + volume down button.
I thought that changing the app drawer style was a feature in CM :/ , well nvm it's OK I can live with it?
ETheHedgehog said:
I thought that changing the app drawer style was a feature in CM :/ , well nvm it's OK I can live with it��
Click to expand...
Click to collapse
If you want to change the drawer style,try using Nova launcher.
Hi can you please tell me what guide did you use to make cyanogenmpd because I want to make for sm g361f
MikeAlmonte said:
Hi can you please tell me what guide did you use to make cyanogenmpd because I want to make for sm g361f
Click to expand...
Click to collapse
I found a guide on YouTube to make cm Roms https://youtu.be/GAyxypK7_K8
Dreamstar said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
What's working
Everything except some bugs .
What's not working
Recorded videos through camera produces wrong color
Installation Instructions
Download and put the ROM zip in your phone.
Go to recovery, wipe data/cache.
Flash ROM.
(Optional) Flash gapps.
Reboot.
Enjoy.
Download:
CyanogenMod 12.1 Alpha 1
CyanogenMod 12.1 Beta 1
CyanogenMod 12.1 Beta 2
Gapps
Source:
https://github.com/DreamStar001
Credits:
CyanogenMod
Google
doesntexits
Special Thanks to @redShaman @Gamersab @Mr,bluwe for testing and their support
XDA:DevDB Information
CyanogenMod , ROM for the Samsung Galaxy Core Prime
Contributors
Dreamstar
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2016-10-13
Click to expand...
Click to collapse
Hey @Dreamstar did you stop developing the ROM? There were no updates since 2016-10-13.
Hey @Dreamstar,
I love the ROM!
Are you still working on it?
I have swapped to it to use it full time. I haven't had any issues, besides a bootloop from attempting to install Xposed and an attempt at the patch to android from Lucky Patcher.
I would love to see updates to this rom and on bugs like the video recording (I got past it by using a third party camera app)
Kind regards
James
Hey @Dreamstar we need you to fix all bugs of this rom so we could use it for our everyday life. I've found some connection issues, video recording produces the wrong colour, the camera app fails to open when launching it directly from the lock screen and sometimes doesn't even open when launching it from the app drawer. If you need the logs, contact me. Please kindly accept my request, thanks and keep it up. :good:
Hey @Dreamstar,
I noticed that my device boot loops whenever I reboot it.
Not sure why.
DJames23 said:
Hey @Dreamstar,
I noticed that my device boot loops whenever I reboot it.
Not sure why.
Click to expand...
Click to collapse
Did you do a factory reset after flashing the ROM or did you flashed mods?
FardeenTGO said:
Did you do a factory reset after flashing the ROM or did you flashed mods?
Click to expand...
Click to collapse
Hey @FardeenTGO,
I had to factory wipe to get the ROM to boot. Everything works fine, and the camera only gives trouble with recording and front facing on some flashes.
The device only goes into boot loop when I apply a theme. I thought it might have been from changing the DPI, but I eliminated it by reflashing a few times and changing the DPI and theme on separate flashes.
I am now using the ROM full time, but I can't set a theme.
Regards
James
@Dreamstar

[ROM][SM-P605][9.0] Unofficial LineageOS 16.0 for lt03lte (04.06.2019)

This is only for SM-P605 (lt03lte)! Even loading an custom recovery will irreversible trigger Knox to 0x1!
Here some warm pie for our Note 10.1 2014 LTE.
LineageOS (former CyanogenMod) is a free, community built, aftermarket firmware distribution of Android 9 (Pie) , which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (GApps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
How to flash:
-Be sure you are on 5.1.1 Bootloader and Modem (Flash 5.1.1 firmware via Odin) !
-Flash TWRP (version 3.2.1-0 or newer needed)
-Make Nandroid backup (optional)
-Wipe > Advanced Wipe > select data, system, ART/Dalvik Cache, Cache, Internal Storage > Swipe
-Install > select Lineage 16.0 Zip > Swipe
-Reboot
Please read full OP before posting or flashing anything. Please don't report any bugs, if you use Xposed, any mod or modified the system.​
What is working
Wifi
Sound
Bluetooth
S-Pen
Off Charging
ADB/MTP
RIL
...
What is not working
Camera
Wifi Hotspot
...
Untested
GPS
IR
...
Bugs/ other things
SELinux Permissive
...
Download
​
Notes:
- TWRP 3.2.1-0 or newer necessary
Changelog:
--Lineage--
20190604: fixed mobile data, many changes and cleanup, added spen pointer...
20181006: fixed RIL, fixed USB MTP, disabled USB host mode, small things
20180825: first test build
Screenshots
Credit: LineageOS Team, Maintainer and Valera1978
Kernel Source
XDA:DevDB Information
[ROM][SM-P605][9.0] Unofficial LineageOS 16.0 for lt03lte (25.08.2018) [TEST], ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
davidmueller13
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 5.1.1 Bootloader/Modem and TWRP 3.2.1-0 or newer
Based On: LineageOS
Version Information
Status: Alpha
Created 2018-08-25
Last Updated 2019-06-04
I saw the new branch on Github and was waiting for this. Huge thank you to you for the continued support of our device!
Edit:
Oh yeah, will try tomorrow!
Hi davidmueller13,
Thank you so much for your passion and keep working for our dying tablet.
I'm sure it will revive this tablet quite useful again.
Looking forward to seeing a wonderfully baked PIE!
Hooray!!!
Thanks a lot for your support to let our loved tablet remain alive !!!!!
Yes!! Thank you so much David!
Yes!! Thank you so much David, greatness for the support and giving new life.
Cool, bummer we don't see love for our P600's as well.
BA_Flash_GOD said:
Cool, bummer we don't see love for our P600's as well.
Click to expand...
Click to collapse
Because it has an Exynos processor.
Thanks Davidmueller for continuing support to our
Note 10.1 2014 LTE.
Mine is a T-Mobile US P-607T and so far has been compatible with all P605 builds.
Would this work on the 2012 edition?
Would this work on the 2012 edition?
No!!
is this usable on p605k?
i have problem getting into twrp in my 605
enriqueyang said:
i have problem getting into twrp in my 605
Click to expand...
Click to collapse
Could you explain which kind of problem you are facing ?
Tilagoon said:
Could you explain which kind of problem you are facing ?
Click to expand...
Click to collapse
i manage to install twrp with odin, however, i can access menu of twrp,
is there other way to flash the firmware without twrp?
enriqueyang said:
i manage to install twrp with odin, however, i can access menu of twrp,
is there other way to flash the firmware without twrp?
Click to expand...
Click to collapse
Have a look here: https://twrp.me/samsung/samsunggalaxynote1012014qcom.html
you will see some alternative ways of installing TWRP
Tilagoon said:
Have a look here: https://twrp.me/samsung/samsunggalaxynote1012014qcom.html
you will see some alternative ways of installing TWRP
Click to expand...
Click to collapse
thank u, will try
Install on my 607, installed ok, gapps installed ok, but there seems to be an issue with the wifi.
I'm unable to see my AP. Other devices connect just fine. I don't use the 4g/LTE sim slot.
*UPDATE 1*
The SSID is not broadcasting, it can see other networks/connect that ARE broadcasting the SSID
*UPDATE 2*
Google is being dumb. I found an additional setting for when adding a hidden wifi network.
Their response (and how to get it to work) is here:
https://productforums.google.com/forum/#!topic/phone-by-google/TAaxC5VPL8A
secretwolf98 said:
Would this work on the 2012 edition?
Click to expand...
Click to collapse
No chance... Can you put a 2014 edition rom on your 2012 edition and have it run?
New build
Changelog:
- fixed RIL
- fixed USB MTP
- disabled USB host mode
- small things
Download

Categories

Resources