[How-to][Recovery]How to change language in TWRP recovery - Xiaomi Mi 8 Guides, News, & Discussion

Forgive My Poor English
I already post the recovery to develop section at HERE
RECOVERY FOR MI 8 SE
DOWNLOAD
drive.google.com/open?id=1X39kp3oBz-SYD-fNK-uEgD6VlUUG-WMq
HOW TO FLASH
Power off your phone and press volume down key and press power key to boot to Fastboot Mode
Download Fastboot tools...(Sorry I can't provide this tool)
open a command line(cmd or powershell in windows) and change directory to the directory where fastboot tool locate(cd PATH/TO/FASTBOOT/TOOL), then you can use fastboot simplely
use
Code:
fastboot flash recovery [PATH TO THE IMAGE FILE YOU DOWNLOADED]
to flash
then use
Code:
fastboot reboot recovery
to boot the recovery
IF YOUR BOOTLOADER IS LOCKED,but you wanna try it
You can use
Code:
fastboot boot [PATH TO THE IMAGE FILE YOU DOWNLOADED]
to boot the recovery(not flash recovery)
(not sure 100% success)
Do anything on YOUR OWN RISK
Pictures(and How to set language to English )

Pictures:
And How to set language to English(almost TWRP recovery can use this way)
Decrypt data partition (input your password or you cant mount data partition)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Next screen is 'Keep system partition read-only'
Left bottom is keep system RO,Right Buttom is change Language(no pic )
this is the Main screen and you can follow these steps to change Language to ENGLISH

Finally, something to start with

bao lu your QQ number

i dont understand why the board name is sirius... there is one allready , some Sony xperia z2
I hope you will post a little more detailed installation ...
Xiaomi devices:
Install TWRP via Fastboot mode, then install our ROM
Code:
fastboot flash recovery twrp.img
fastboot boot twrp.img
This will be all?
I presume i have to rename the recovery-TWRP-3.2.1-0629-XIAOMI8SE-CN-wzsx150.img to twrp.img ?

marcel112 said:
I presume i have to rename the recovery-TWRP-3.2.1-0629-XIAOMI8SE-CN-wzsx150.img to twrp.img ?
Click to expand...
Click to collapse
You don't need to rename any file to flash. For simplicity yes if you like.

_katho_ said:
You don't need to rename any file to flash. For simplicity yes if you like.
Click to expand...
Click to collapse
ok, let me refrace:
If i like to flash this recovery for the SE, for it to work, i have to follow the two comments, after renaming the .img to twrp.img
fastboot flash recovery twrp.img
fastboot boot twrp.img

After format data - reboot to recovery - wipe dalvik/etc... Install xiaomi.eu rom.
Stuck by bootloop

marcel112 said:
ok, let me refrace:
If i like to flash this recovery for the SE, for it to work, i have to follow the two comments, after renaming the .img to twrp.img
fastboot flash recovery twrp.img
fastboot boot twrp.img
Click to expand...
Click to collapse
Yes, that should work, it's the usual way to flash twrp.

i tried today to flash twrp, unsuccessfully
I installed fastboot and adb drivers ( flashed miui 10 beat using mi flash tool allready )
I enter fastboot on device
i open cmd prompt
i first enter: fastboot devices, then i get respons with devices number
When i enter command: fastboot flash recovery recovery.img
i get :
target reported max download size of 536870912 bytes
sending 'recovery' (29856 KB)...
but thats it........ nothing happens anymore!!
I tried and waited long time
Who can tell me what is going wrong
---------- Post added 6th July 2018 at 12:40 AM ---------- Previous post was 5th July 2018 at 11:46 PM ----------
I can put the phone in fastboot mode....
As soon as i connect phone to laptop, it takes 1 sec , then phone goes out off fastboot and in de left top corner are very very small letters.
I believe it says, press key to reboot, but like i say, very hard to read.
Phone reboots , then it gives battery in center off screen.
When i pess power again.
All goes normall and i can use phone as it should.
When i use updater app, and choose: reboot to recovery, it does like it should.
I can chooose reboot, wipe data and use mi assistent i believe.
Any idea would be awesome

skolarek said:
After format data - reboot to recovery - wipe dalvik/etc... Install xiaomi.eu rom.
Stuck by bootloop
Click to expand...
Click to collapse
You can try 'Disable DM-verify in 'Advance'...
maybe it work

marcel112 said:
i tried today to flash twrp, unsuccessfully
I installed fastboot and adb drivers ( flashed miui 10 beat using mi flash tool allready )
I enter fastboot on device
i open cmd prompt
i first enter: fastboot devices, then i get respons with devices number
When i enter command: fastboot flash recovery recovery.img
i get :
target reported max download size of 536870912 bytes
sending 'recovery' (29856 KB)...
but thats it........ nothing happens anymore!!
I tried and waited long time
Who can tell me what is going wrong
---------- Post added 6th July 2018 at 12:40 AM ---------- Previous post was 5th July 2018 at 11:46 PM ----------
I can put the phone in fastboot mode....
As soon as i connect phone to laptop, it takes 1 sec , then phone goes out off fastboot and in de left top corner are very very small letters.
I believe it says, press key to reboot, but like i say, very hard to read.
Phone reboots , then it gives battery in center off screen.
When i pess power again.
All goes normall and i can use phone as it should.
When i use updater app, and choose: reboot to recovery, it does like it should.
I can chooose reboot, wipe data and use mi assistent i believe.
Any idea would be awesome
Click to expand...
Click to collapse
ehhh,
you can try run this
fastboot boot [RECOVERY IMAGE YOU DOWNLOADED]
and the phone will boot to the recovery(but it still not flash into your phone)
and use the recovery to flash recovery
if you still get a stuck at
sending boot ......
trying change a computer or change a cable and retry it

q792602257 said:
ehhh,
you can try run this
fastboot boot [RECOVERY IMAGE YOU DOWNLOADED]
and the phone will boot to the recovery(but it still not flash into your phone)
and use the recovery to flash recovery
if you still get a stuck at
sending boot ......
trying change a computer or change a cable and retry it
Click to expand...
Click to collapse
Well i upgraded to succesfull flash twrp
after that i used fastboot boot twrp.img
I booted in twrp, changed the lang to english.
Choose keep system read only
Can use it, but when i tried to backup i get backup failed.
I also cant seem to find the internal storage... i can use the fiel manager, but i dont find the folders like in normal working mode
So i cant backup, flash magisk, so i dont dare to wipe and flash , lets say eu.rom

marcel112 said:
Well i upgraded to succesfull flash twrp
after that i used fastboot boot twrp.img
I booted in twrp, changed the lang to english.
Choose keep system read only
Can use it, but when i tried to backup i get backup failed.
I also cant seem to find the internal storage... i can use the fiel manager, but i dont find the folders like in normal working mode
So i cant backup, flash magisk, so i dont dare to wipe and flash , lets say eu.rom
Click to expand...
Click to collapse
the first screen is use to deecrypt data partition ,if you select cancel or input wrong password,you can't modify data partition
if you dont know the password,you can simply format data partition,but you will loose all data(include internal storage)

q792602257 said:
the first screen is use to deecrypt data partition ,if you select cancel or input wrong password,you can't modify data partition
if you dont know the password,you can simply format data partition,but you will loose all data(include internal storage)
Click to expand...
Click to collapse
whats should be the pasword?
Is that my pin how i unlock my device?
Edit:
And if i choose format data, then my internal partition will be wiped.
How can i flash a new zip file, like magisk or eu.miui rom.
Or after format data i can backup current china beta 10 8.7.5.
Then reboot in system, copy this eu miui rom zip to internal and reboot to twrp again.
Wipe device and flash the eu miui zip file?
What if i wipe and can flash eu miui file.
Can i flash using fastboot a rom?
I mean, can i go back to china beta rom?
I have a ch image 8.6.28

marcel112 said:
whats should be the pasword?
Is that my pin how i unlock my device?
Edit:
And if i choose format data, then my internal partition will be wiped.
How can i flash a new zip file, like magisk or eu.miui rom.
Or after format data i can backup current china beta 10 8.7.5.
Then reboot in system, copy this eu miui rom zip to internal and reboot to twrp again.
Wipe device and flash the eu miui zip file?
What if i wipe and can flash eu miui file.
Can i flash using fastboot a rom?
I mean, can i go back to china beta rom?
I have a ch image 8.6.28
Click to expand...
Click to collapse
The password is your pin code to unlock your phone,and you can mount data partition success
if you can't successfully mount data partition , you can
In the Recovery : Click Advance-> ADB SIDELOAD
and connect your phone to PC
use
Code:
adb sideload [PATH TO ROM ZIP FILE]
to flash without copy that zip file to your phone
also since you can mount data partition successfully,you can connect to PC, copy that zip file to Internal storage to flash
If you change your ROM,you can easily flash that 'fastboot rom' back via fastboot(WARNING : Do not flash wrong ROM,it may replace the bootloader)
and you can go back to china beta rom anytime you want(Just need flash the phone again)
maybe a little hard to understand , sorry for my poor English

Guys problem..
I made backup off miui 10 beta chinese
I wiped system/cache/data/dalvik..
Flashed new eu.miui 8.6.28 rom... install is all good.
When i boot, it is stuck in bootloop
(tried to look for : Disable DM-verify in 'Advance
I can see it not in advance..
Now i am stuck with non working phone..
Who can help me ( fast ?

marcel112 said:
Guys problem..
I made backup off miui 10 beta chinese
I wiped system/cache/data/dalvik..
Flashed new eu.miui 8.6.28 rom... install is all good.
When i boot, it is stuck in bootloop
(tried to look for : Disable DM-verify in 'Advance
I can see it not in advance..
Now i am stuck with non working phone..
Who can help me ( fast ?
Click to expand...
Click to collapse
You have to format Data!!

Superwitschi said:
You have to format Data!!
Click to expand...
Click to collapse
ok, i did format data
Now all is empty.
I rebooted into TWRP again.
I used USB-OTG to install the rom again.
All going well in install, no error
When i choose reboot, no message: No OS installed...
But still in bootloop!!

marcel112 said:
ok, i did format data
Now all is empty.
I rebooted into TWRP again.
I used USB-OTG to install the rom again.
All going well in install, no error
When i choose reboot, no message: No OS installed...
But still in bootloop!!
Click to expand...
Click to collapse
You can try 'install root' in Advance
maybe the bootloop is cause by the dm-verify in the bootloader

Related

Bricked Honor 7. What can I do now

I just installed TWRP and after flashing SuperSU I couldn't get out of recovery anymore. On every restart the phone booted in recovery.
I decided to flash the stock recovery again. After I did that I got into rescue mode. I can not do anything anymore in there. No fastboot, no adb.
It just points to zh.ui.vmall.com/emotiondownload.php?mod=restore but in this list there is no download for the Honor 7.
Error messages are:
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What can I do?
try to reboot on bootloader mode with volumes button combination
Doesn't work. I keep getting to this screen.
It looks like the bootloader but I guess it can not load the recovery.
Also fastboot does not work there.
I think i found the way
Hi-Suite installed on the PC. Phone off, connected to PC, press and hold Vol + and Power until the appearance of recovery.
Options available:
Reboot
Download the package
Switch off
Bootloader Mode (aka Fastboot):
Phone off, connected to the PC, press and hold Vol - Power up and appearance of the screen with the droid.
Or
Phone off, disconnected from the PC, press and hold Vol - and while holding down, connect to the PC.
Thanks for the help.
I can't get into recovery that way. When i press vol up + power I get into this screen again because recovery could not be loaded.
Unfortunately i don't think if there is a another way,,, contact with huawei
Try rumrunner on pc to get into fast boot mode.
Immediately close rum runner screen when it starts rebooting
sent with Huggzzz from my modded, non-OC'ed, very fast running S-Off ADR6425LVM on CyanogenMod 11 20150805 Rom with Tapatalk
etticat said:
I just installed TWRP and after flashing SuperSU I couldn't get out of recovery anymore. On every restart the phone booted in recovery.
I decided to flash the stock recovery again. After I did that I got into rescue mode. I can not do anything anymore in there. No fastboot, no adb.
It just points to zh.ui.vmall.com/emotiondownload.php?mod=restore but in this list there is no download for the Honor 7.
Error messages are:
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
What can I do?
Click to expand...
Click to collapse
Assuming that you have bootloader unlocked and adb debugging enabled. Otherwise, I guess, you're out of luck.
Extract RECOVERY.img of respective ROM you have installed using this method: http://forum.xda-developers.com/showthread.php?t=2433454. Copy dload of the same ROM to the root of sd card and insert it. Now turn off the phone and boot into fastbboot (bootloader): conect it turned off with usb to the pc, where you have drivers and platform tools installed. Then press and hold volume down and power on simultaneously as long as needed to boot to fastboot.
After that install previously extracted RECOVERY.img ([Guide]How to root Honor 7). Boot the system, enable adb debugging, go to settings-Updater-Local update and flash the ROM from dload.
Then you may flash custom recovery, replace the ROM, but never again without making nandroid first.
ǀcey said:
Try rumrunner on pc to get into fast boot mode.
Immediately close rum runner screen when it starts rebooting
sent with Huggzzz from my modded, non-OC'ed, very fast running S-Off ADR6425LVM on CyanogenMod 11 20150805 Rom with Tapatalk
Click to expand...
Click to collapse
Isn't rumrunner just for HTC?
Yea it probably is just for the resound. Idk.
I'm noob at all this.
What I do know is although my PC could see the phone perfectly before I tried to s-off. That once phone entered into never-ending boots the PC couldn't see the phone anymore. Hence I couldn't use abd or fastboot on the PC nor would the phone enter hboot, fastboot, + recovery on its own.
Somehow re-running rumrunner it was able to force the PC to see it enough to allow the phone to be forced into fastboot mode and that saved my poor phone.
At this point I think u [email protected] nuthin more to lose with trying it out. I hate to say that i'm sry.
In the least go read my post there maybe it's enough to help u to figure out how to undo what happened to yours.
If you do try to use rumrunner
Have phone powered on while hooked to PC
Say Yes twice in rumrunner
Rumrunner will try to selfupdate
Then it will try to force the phone to reboot
Watch phone screen..if it goes black
Immediately close rumrunner window on PC at that point.
We don't want rumrunner trying to s-off ur honor lol no and it will try soon as phone goes in fastbootmode. Keep phone plugged in PC.
If successful now load adb or whatever u need on pc
---------- Post added at 12:58 AM ---------- Previous post was at 12:57 AM ----------
http://forum.xda-developers.com/showpost.php?p=63595063&postcount=193
ooooo
فرستاده شده از HUAWEI Y330-U11ِ من با Tapatalk
hello.
i have a plk-l01 with stock 5.0.2 and stock recovery.
with multi-tool twrp and root flashed, than i would like to flash modaco rom v4.1 (MM)
now i have by booting "honor" logo and under powered by android.
i have flashed another custom rom (yoda 7.0) but is the same.
with stock recovery can´t flash any rom, while by 5% come error.
what methode will work to flash any rom or stock rom back to phone?
thanks
helpppp
Lefteris Fragiadakis (Frago) said:
try to reboot on bootloader mode with volumes button combination
Click to expand...
Click to collapse
i have same problem but i can access fastboot . i have downloaded stock rom in my pc is there anyway to flash stock rom from adb?
kosmoo said:
hello.
i have a plk-l01 with stock 5.0.2 and stock recovery.
with multi-tool twrp and root flashed, than i would like to flash modaco rom v4.1 (MM)
now i have by booting "honor" logo and under powered by android.
i have flashed another custom rom (yoda 7.0) but is the same.
with stock recovery can´t flash any rom, while by 5% come error.
what methode will work to flash any rom or stock rom back to phone?
thanks
Click to expand...
Click to collapse
You must flash the rom with twrp after wipe system, cache, data.
To install MM the basic version was to be the B330.
Now you have to reinstall the stock recovery and flash the rom complete B330 through the three button.
Inviato dal mio PLK-L01 utilizzando Tapatalk
AleAndroid96 said:
You must flash the rom with twrp after wipe system, cache, data.
To install MM the basic version was to be the B330.
Now you have to reinstall the stock recovery and flash the rom complete B330 through the three button.
Inviato dal mio PLK-L01 utilizzando Tapatalk
Click to expand...
Click to collapse
this method was good, thanks!
now have a stock recovery with stock b330 rom.
thanks
You can root it with twrp-3.0.2-0-plank.img and SuperSU 2.62
YOUTUBE /watch?v=eDyxj6C8eW8
etticat said:
I just installed TWRP and after flashing SuperSU I couldn't get out of recovery anymore. On every restart the phone booted in recovery.
I decided to flash the stock recovery again. After I did that I got into rescue mode. I can not do anything anymore in there. No fastboot, no adb.
It just points to zh.ui.vmall.com/emotiondownload.php?mod=restore but in this list there is no download for the Honor 7.
Error messages are:
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
What can I do?
Click to expand...
Click to collapse
dude, i hope you fixed you issue... i had the same problem just now... all normal until i installed a new version of supersu (2.7.4 i think) and i wiped the cache and dalvic cache (caused problems everytime) after that i couldnt boot the system, error 10 and 2 i think (boot and system).
Then, after the whole day was over and i didnt find a fix for my problem (my twrp worked) i backed up everything and then installed the original recovery i got some time ago from huawaiextractor, but it got worser. did the same like you, every damned step xD now i understood what you were talking about, before i didnt understand what you said...
so when i boot, it says error 10 ans 2 and when i want to start recovery it says 11 and 2 (recovery and boot).
i dont know why usb debugging didnt worked and why i coulnt use fastboot and adb like everytime. i once fixed a similar issue with the honor multitool and adb and fastboot.
Only thing i can do is connect it to my pc and hisuite, then a new menu shows where u can download a package or update, but it says failed everytime when i use it.
So what did you do with your bricked phone?
I had the same problems (errors) I managed to find a solution. Just extract boot.img cust.img repair.img system.img with huawei extractor. Than just make a full cache wipe. Flash this four .img and love your fully working, totally wiped, almost brand new phone!
PS you should find a way to use fastboot!! There is no other way!
ǀcey said:
Try rumrunner on pc to get into fast boot mode.
Immediately close rum runner screen when it starts rebooting
sent with Huggzzz from my modded, non-OC'ed, very fast running S-Off ADR6425LVM on CyanogenMod 11 20150805 Rom with Tapatalk
Click to expand...
Click to collapse
How did you do please ? i can't enter to fastboot mode too
can you help me please ?
etticat said:
I just installed TWRP and after flashing SuperSU I couldn't get out of recovery anymore. On every restart the phone booted in recovery.
What can I do?
Click to expand...
Click to collapse
With a stock boot.img sometimes you'll end up in bootloop like yourself. If you are still having issues follow below steps.
Boot into bootloader mode, if its looping very fast, then press and hold Vol DOWN button once the screen gets blank after a loop and simultaneously connect to PC, you'll land in bootloader mode.
Once in bootloader mode, flash system.img of your respective previous firmware, in your case just flashing system.img will do.
After doing that you can enter into system again. If you want you also can flash the whole UPDATE.APP package by three button combo
I hope this helps someone.

[email protected] mode

hello I have a problem
I made update form 130 to 140 it was ok no errors. After reboot was honor logo and stop. After reboot to stock recovery a was done wipe format data factory reset and was error after 15 % data and cache format failed. Now phone start only in fastboot mode. Help me what i can do more?
Are u using L21/22/24 ?
l21
stock only fastboot . When i turn on phone with volume+and down update from sdcard is failed and only fastboot starts. I made fastboot system system.img and boot.img all ok but the same sytuation sorry for english
deamon started
error device not found
only fastboot comand work
fasboot reboot reboot to fasboot
a can connect phone to ubuntu 15.04 what a have to install on ubuntu?
the problem is that when i go to stock recovery and enter factory format about 15 % there is error and only shut down is active
boot.img and system.img i have from 130 on my laptop extracted from update.app on my fastboot i have phone unlocked and fru unlock
I made uprage to 140 and it was good but after reboot its no good
what do you mean? honor logo? yes only 0,5 sec and fastboot screen
i thing the problem is with cache partition i can't erase format this partition
yes i have dload folder with the update.app full b130
adb reboot recovery deamon started error device not found
1,6 gb huawei update extractor open this file and i can extract
3 Gb ? where is the file with that size? when i made fastboot flash recovery recovery.img from update.app when i can,t go to recovery not working
when i did "fastboot flash recovery recovery.img", i have no error but i can go to recovery not work
I,m looking for 3 gb file but every file is about 1.5 Gb
but always is update.zip no full
yes thank you i,m desperate to repair my phone
yes
can i install twrp now i have backup my soft in twrp
Robix74 said:
can i install twrp now i have backup my soft in twrp
Click to expand...
Click to collapse
yeah did you download the rom I posted in the other thread
Sent from my KIW-L24 using Tapatalk
not yet but can i install twrp now?

Can't flash rom because of default encryption on stock 19S Indian

Hello everybody,
I want to flash the madsurfer 20s. But I'm stock because of encryption in de stock 19S Indian rom. .
No zip file from the rom is visible in Twrp but it is in root of the device. Can somebody suggest me how to work around and install the new rom?
boot into twrp, and format the device and delete all data (this will of course delete everything that is on the device)
deactivate lock screen security may help, otherwise like greenManGaming said and push or sideload rom by ADB
Hi. Do this:
1. Make a Backup of all your data, when your phone is on connect to a PC and copy all your music and photos..
2. Boot your phone into fastboot (power button + vol up)
3. Open de CMD window in your folder where ASB was installed.
4. Type fastboot format userdata
5. Reboot the phone. Now, you can place the files you want into the phone and the TWRP will be able to see them.
Luck!
How to install twrp for le max 2 Indian version
Enable oem unlocking
In fastboot mode
Fastboot boot recovery twrp.img
Backup everything on Twrp,before flashing anything
RISHI RAJ said:
Enable oem unlocking
In fastboot mode
Fastboot boot recovery twrp.img
Backup everything on Twrp,before flashing anything
Click to expand...
Click to collapse
Seems to Install you need to use flash command instead boot. Boot command runs the recovery only once.
Sent from my Le X820 using Tapatalk
Filozof71 said:
Seems to Install you need to use flash command instead boot. Boot command runs the recovery only once.
Sent from my Le X820 using Tapatalk
Click to expand...
Click to collapse
right! with boot the phone will only boot once in the chosen image (of course you can repeat that method as often as you want to), but if you want to boot into twrp repeatedly and there is no reason not to flash it you should flash the image, that will save time
greenManGaming said:
boot into twrp, and format the device and delete all data (this will of course delete everything that is on the device)
Click to expand...
Click to collapse
I did this, then booted into stock and connected to MTP, transferred the zip again, and rebooted back into recovery to flash. It was an extra step, but it worked.

Fix Current Image (Boot/Recovery) Destroyed!

I want to install a custom rom but some how boot image break please help me guys. I am so worried
ok here are steps !
djdreamerr said:
I want to install a custom rom but some how boot image break please help me guys. I am so worried
Click to expand...
Click to collapse
-Connect phone in fastboot mode with usb cable
-by long pressing volume down with power button together
-enter these commands
- fastboot erase userdata
-fastboot format userdata
download stock rom system.img file (will be around 2-4 gb in size) by googling on realme xt system image.
and also download boot.img and twrp recovery images like this from googling.
-fastboot flash system system.img
-fastboot flash boot boot.img
-fastboot flash recovery recovery.img
after this go to recovery mode by changing modes with volume buttons in fastboot mode.
now u can install stock rom by downloading the stock rom of the version system.img u flashed now.
I ran into the same problem last night, I restored my phone back to stock rom today. I've uploaded the extracted C03 firmware for anyone whose run into the same problem. Just flash using fastboot and you'll able to restore your phone too
Code:
https://mega.nz/file/BQIRgQqS#SvwoR1D7gtaJZlDzCu_ezXdcH_ZtRfgcqnobCTNiGaU
sepzo said:
-Connect phone in fastboot mode with usb cable
-by long pressing volume down with power button together
-enter these commands
- fastboot erase userdata
-fastboot format userdata
download stock rom system.img file (will be around 2-4 gb in size) by googling on realme xt system image.
and also download boot.img and twrp recovery images like this from googling.
-fastboot flash system system.img
-fastboot flash boot boot.img
-fastboot flash recovery recovery.img
after this go to recovery mode by changing modes with volume buttons in fastboot mode.
now u can install stock rom by downloading the stock rom of the version system.img u flashed now.
Click to expand...
Click to collapse
THANKS DUDE YOU SAVE MY LIFE :good:
I AM GLAD YOU POST THIS
djdreamerr said:
THANKS DUDE YOU SAVE MY LIFE :good:
I AM GLAD YOU POST THIS
Click to expand...
Click to collapse
You welcome bro, Now using Samsung S10 Lite
(Boycottchina Movement )
I finally decided to root my phone today and unlocked the bootloader with all the excitement, but ran into this "boot/recovery destroyed" problem. All I did was flashing Orangefox image and installed magisk. I did some digging on google and found out, two things fixes it. 1) flashing the stock recovery, and then 2) flashing vbmeta.img with the commad "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img". It actually solved the problem for me and now I'm back to orangefox and magisk works real good. There's no need to download an entire os for this fix. Nearly wasted 2gb of data on downloading the stock firmware, while I found this fix
Works Like a charm
salaigeethan666 said:
I finally decided to root my phone today and unlocked the bootloader with all the excitement, but ran into this "boot/recovery destroyed" problem. All I did was flashing Orangefox image and installed magisk. I did some digging on google and found out, two things fixes it. 1) flashing the stock recovery, and then 2) flashing vbmeta.img with the commad "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img". It actually solved the problem for me and now I'm back to orangefox and magisk works real good. There's no need to download an entire os for this fix. Nearly wasted 2gb of data on downloading the stock firmware, while I found this fix
Click to expand...
Click to collapse
This works like a charm. Just flash TWRP again and vbmeta with above command and reboot.
get required files from here.
https://forum.xda-developers.com/realme-xt/how-to/rooting-stock-rom-realme-xt-color-os-t3998271
lost recovery
[email protected] said:
This works like a charm. Just flash TWRP again and vbmeta with above command and reboot.
get required files from here.
https://forum.xda-developers.com/realme-xt/how-to/rooting-stock-rom-realme-xt-color-os-t3998271
Click to expand...
Click to collapse
my realme xt also got breaked. then as u said i flashed latest twrp and then vbmeta with given cmd, tried to boot to recovery. nothing happened. then tried to power off and on, got into working realme rom. fastboot is working but unable to boot to recovery. in fastboot bootloader status shows unlocked. tried to flash twrp img again but yet no recovery.
surajak said:
my realme xt also got breaked. then as u said i flashed latest twrp and then vbmeta with given cmd, tried to boot to recovery. nothing happened. then tried to power off and on, got into working realme rom. fastboot is working but unable to boot to recovery. in fastboot bootloader status shows unlocked. tried to flash twrp img again but yet no recovery.
Click to expand...
Click to collapse
Hey there,
It would be great if you could attached any error messages. Or what you exactly encountered after flashing vbmeta. For easy comm. you can contact on t.me/tempKChannel
Bricked my phone today and found this thread, thanks for everyone for providing solution!
My bootloader locked realme xt is displaying only the logo. No way to go to recovery, system or fastboot mode. Is is possible to still do something about it? I live in a region where there is no service center.
I've got a 8-9 month old XT with this exact issue. Phone is mint amd has always had a case and glass screen protector on it. No PC to flash files with fastboot so I ordered a POCO X3 NFC. Looking to sell it for $150 to somebody for an easy fix. Is that allowed on XDA?
I had to hire someone online to have it remotely serviced (on my PC).
Had boot/recovery destroyed message after attempting to flash a gsi. I followed the unbrick guide. I can access fastboot & boot into recovery, however touch input is not working so I'm unable to do anything. Phone sticks on the realme screen when attempting to let it boot. Any ideas? I live in the US so a service center isn't possible.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When to use?
-> If first time custom recovery installation is messed up because forgot to intall vbmeta_disabler in Recovery.
-> If you messed up and now stuck on fastboot mode and cannot go to recovery or system.
-> When your device is automatically rebooting to fastboot every 10-15 seconds.
-> Can also be used if you get a boot destroyed screen on trying to reboot to system and recovery.
How to use?
-> Download your vbmeta.img file of your device and put it inside your ADB or Platform Tools folder
-> Open CMD in ADB (You know it)
ADB commands :
Type "fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img" (Don't press enter yet)
->Connect Usb to PC and long press device's volume down and power button to go to fastboot mode ( In some cases Fastboot mode remains only for few seconds)
->When you see fastboot mode in your Smartphone then you press ENTER in your PC
->If you see "success" in cmd then you can reboot to your custom recovery
dalda123 said:
View attachment 5444009
When to use?
-> If first time custom recovery installation is messed up because forgot to intall vbmeta_disabler in Recovery.
-> If you messed up and now stuck on fastboot mode and cannot go to recovery or system.
-> When your device is automatically rebooting to fastboot every 10-15 seconds.
-> Can also be used if you get a boot destroyed screen on trying to reboot to system and recovery.
How to use?
-> Download your vbmeta.img file of your device and put it inside your ADB or Platform Tools folder
-> Open CMD in ADB (You know it)
ADB commands :
Type "fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img" (Don't press enter yet)
->Connect Usb to PC and long press device's volume down and power button to go to fastboot mode ( In some cases Fastboot mode remains only for few seconds)
->When you see fastboot mode in your Smartphone then you press ENTER in your PC
->If you see "success" in cmd then you can reboot to your custom recovery
Click to expand...
Click to collapse
i can't enter recovery and fastboot mode what should i do
He
Nightmareverified said:
i can't enter recovery and fastboot mode what should i
Click to expand...
Click to collapse
Nightmareverified said:
i can't enter recovery and fastboot mode what should I do
Click to expand...
Click to collapse
Hey bro did you the find the way to go to fast boot mode
dalda123 said:
View attachment 5444009
When to use?
-> If first time custom recovery installation is messed up because forgot to intall vbmeta_disabler in Recovery.
-> If you messed up and now stuck on fastboot mode and cannot go to recovery or system.
-> When your device is automatically rebooting to fastboot every 10-15 seconds.
-> Can also be used if you get a boot destroyed screen on trying to reboot to system and recovery.
How to use?
-> Download your vbmeta.img file of your device and put it inside your ADB or Platform Tools folder
-> Open CMD in ADB (You know it)
ADB commands :
Type "fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img" (Don't press enter yet)
->Connect Usb to PC and long press device's volume down and power button to go to fastboot mode ( In some cases Fastboot mode remains only for few seconds)
->When you see fastboot mode in your Smartphone then you press ENTER in your PC
->If you see "success" in cmd then you can reboot to your custom recovery
Click to expand...
Click to collapse
bro you were god to me for a period of time you have some real og skills i dont know how many peoples problem you have solved but you solved mine my phone was dead from one week now its alive once again thank you pixel expirience im good with stock rom
sepzo said:
ok here are steps !
-Connect phone in fastboot mode with usb cable
-by long pressing volume down with power button together
-enter these commands
- fastboot erase userdata
-fastboot format userdata
download stock rom system.img file (will be around 2-4 gb in size) by googling on realme xt system image.
and also download boot.img and twrp recovery images like this from googling.
-fastboot flash system system.img
-fastboot flash boot boot.img
-fastboot flash recovery recovery.img
after this go to recovery mode by changing modes with volume buttons in fastboot mode.
now u can install stock rom by downloading the stock rom of the version system.img u flashed now.
Click to expand...
Click to collapse
Simple flash vbmeta fastboot flash vbmeta.img 100% fix your destroy problem
Does anybody have solution of the current imgae (bootlrecovery) have been destroyed and can not boot of one plus 8 i m ready to pay i just need the flash rom and stock rom of one plus 8

How To Guide [Mojito/Sunny] Install any recovery ADB fastboot | TWRP,..etc

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm glad to introduce you the first Guide for Redmi note 10 on XDA community , how to flash custom recovery over stock mi recovery. It's easy and quick detailed guide, Let's start.
Pre-requisites:
1- Unlocked bootloader. ( Check-out )
2- Recovery IMG. (Check links section end-thread)
3- USB debugging enabled:
- Go to settings -> My device -> All specs -> hit build number 7 times till you see message ( you are developer now..)
- Then go to settings -> Additional settings -> Developers options -> Toggle on "USB debugging".
4- Download Minimal ADB Fastboot & install it.
Steps for PE, Lineage, OrangeFox Recoveries:
1- Download the custom recovery IMG and save it on your PC.
2- re-name the IMG file to easy name such as: flash_me.img
3- copy the IMG file to the "Minimal ADB Fastboot" installation Dictionary.
4- Run "cmd-here.exe" as Administrator.
5- turn off your device and hold the "volume down + power" to enter fastboot mode.
6- once you booted in fastboot plug-in your device with usb cable to PC.
7- type in cmd (Don't use it for TWRP RECOVERY) :
Code:
fastboot flash boot flash_me.img
This will keep you in fastboot after install done .
Type in cmd:
Code:
fastboot reboot
when you hit enter press and hold the volume-UP button till you boot to the recovery otherwise if booted to system you need to repeat steps.
Spoiler: This command for TWRP recovery (IMPORTANT)
Or you can use this command but not recommend for pe recovery or lineage
Code:
fastboot boot flash_me.img
this will boot auto to recovery
Note 1: We don't have Recovery partition so we used boot command!
Spoiler: Installation of TWRP recovery (Important)
• If you installed TWRP recovery you need to follow this step to keep your custom recovery alive and to just such as booted recovery for once then:
A- once you booted to twrp connect the usb to pc and copy the same ".img" file from PC to your device.
B- Go to "Advance -> Install Recovery Ramdisk".
C- select the image you copied. wait to be done.
Note 2: You can re-install (flash) stock Mi recovery at anytime with same steps (You can find it in zip file of stock rom as "boot.img". Or by flash stock rom
Links for Available Recoveries:
• TWRP recovery: [RECOVERY] [ALPHA] TeamWin Recovery Project
• OrangeFox Recovery:[OFFICIAL][RECOVERY] OrangeFox Recovery Project [R11.1][mojito][sunny]
• Pe recovery:
https://sourceforge.net/projects/mojito-sunny/files/Recovery/PE_Aosp_Recovery.img/download
• Lineage Recovery download link:
https://drive.google.com/file/d/1Q9TZFtyOSBezOVc3DXBGQXQCi0hEr6gq/view?usp=sharing
✓ All of them tested by me
Abdullah.Csit said:
View attachment 5268247​
I'm glad to introduce you the first Guide for Redmi note 10 on XDA community , how to flash custom recovery over stock mi recovery. It's easy and quick detailed guide, Let's start.
Pre-requisites:
1- Unlocked bootloader. ( Check-out )
2- Recovery IMG.
3- USB debugging enabled:
- Go to settings -> My device -> All specs -> hit build number 7 times till you see message ( you are developer now..)
- Then go to settings -> Additional settings -> Developers options -> Toggle on "USB debugging".
4- Download Minimal ADB Fastboot & install it.
Steps:
1- Download the custom recovery IMG and save it on your PC.
2- re-name the IMG file to easy name such as: flash_me.img
3- copy the IMG file to the "Minimal ADB Fastboot" installation Dictionary.
4- Run "cmd-here.exe" as Administrator.
5- turn off your device and hold the "volume down + power" to enter fastboot mode.
6- once you booted in fastboot plug-in your device with usb cable to PC.
7- type in cmd :
View attachment 5268249
8- When it finished type this command, When the screen goes off, Immediately Press "Volume Up + Power buttons" to boot into Recovery mode. or you will reset all the steps of flashing
Code:
fastboot reboot
9- Done
Note : You can re-install (flash) stock Mi recovery at anytime with same steps.
Click to expand...
Click to collapse
Where do we download custom recovery IMG for Redmi Note 10? thanks
Abdullah.Csit said:
View attachment 5268247​
I'm glad to introduce you the first Guide for Redmi note 10 on XDA community , how to flash custom recovery over stock mi recovery. It's easy and quick detailed guide, Let's start.
Pre-requisites:
1- Unlocked bootloader. ( Check-out )
2- Recovery IMG.
3- USB debugging enabled:
- Go to settings -> My device -> All specs -> hit build number 7 times till you see message ( you are developer now..)
- Then go to settings -> Additional settings -> Developers options -> Toggle on "USB debugging".
4- Download Minimal ADB Fastboot & install it.
Steps:
1- Download the custom recovery IMG and save it on your PC.
2- re-name the IMG file to easy name such as: flash_me.img
3- copy the IMG file to the "Minimal ADB Fastboot" installation Dictionary.
4- Run "cmd-here.exe" as Administrator.
5- turn off your device and hold the "volume down + power" to enter fastboot mode.
6- once you booted in fastboot plug-in your device with usb cable to PC.
7- type in cmd :
View attachment 5268249
8- When it finished type this command, When the screen goes off, Immediately Press "Volume Up + Power buttons" to boot into Recovery mode. or you will reset all the steps of flashing
Code:
fastboot reboot
9- Done
Note : You can re-install (flash) stock Mi recovery at anytime with same steps.
Click to expand...
Click to collapse
Actuallly there is no recovery partition in Redmi note 10....
And that partition system is the main issue why we are stuck with only initial pe recovery.....
Guide Updated:
- Introduce flash recovery as boot recovery guide.
- Added Clarification for flashing recoveries as boot for now.
- Added link to pe recovery.
zengin said:
Where do we download custom recovery IMG for Redmi Note 10? thanks
Click to expand...
Click to collapse
The developer will open thread on XDA soon.
but you can download it here:
https://sourceforge.net/projects/mojito-sunny/files/Recovery/PE_Aosp_Recovery.img/download
Subhan. said:
Actuallly there is no recovery partition in Redmi note 10....
And that partition system is the main issue why we are stuck with only initial pe recovery.....
Click to expand...
Click to collapse
So we will never see TWRP recovery??
bomberb17 said:
So we will never see TWRP recovery??
Click to expand...
Click to collapse
No well that means it will be really hard....
because boot and recovery are in same partition and mistakes can cause problems in boot.img too...
Like PE Recovery is based and meant for 12.0.4
and if you flash in any other version wifi stops working
And also twrp and ofox dont support virtual a/b for now...
So devs will get it working...
But with time...
I see... So I have a few more questions:
1. What's the practical difference between stock recovery and PE AOSP recovery? Is it limited in some features somehow? (e.g. wiping cache/dalvik, directly installing roms without fastboot et.)
2. Can we root (i.e. flash Magisk) with PE recovery?
bomberb17 said:
I see... So I have a few more questions:
1. What's the practical difference between stock recovery and PE AOSP recovery? Is it limited in some features somehow? (e.g. wiping cache/dalvik, directly installing roms without fastboot et.)
2. Can we root (i.e. flash Magisk) with PE recovery?
Click to expand...
Click to collapse
i also have same questions
with twrp vs asop recovery
Abdullah.Csit said:
Note 1: Until now there is only one recovery and it's has issues to access recovery partitions, The developer had to use boot partitions as recovery partitions, So if you downloaded Pixel experience recovery or any recovery for Redmi Note 10.
Click to expand...
Click to collapse
I also don't understand this note. Specifically there is an "if" in the last sentence, but there is no "then"..
bomberb17 said:
I also don't understand this note. Specifically there is an "if" in the last sentence, but there is no "then"..
Click to expand...
Click to collapse
It's an explanation for why we use "boot" command on cmd not the "recovery" command.
anyway, it's temporary method.
-Note edited.
thanks for you understanding
princesupernoah said:
i also have same questions
with twrp vs asop recovery
Click to expand...
Click to collapse
Google it, a lot of information
Developers working hard. we should see it soon be patience.
bomberb17 said:
I see... So I have a few more questions:
1. What's the practical difference between stock recovery and PE AOSP recovery? Is it limited in some features somehow? (e.g. wiping cache/dalvik, directly installing roms without fastboot et.)
2. Can we root (i.e. flash Magisk) with PE recovery?
Click to expand...
Click to collapse
1- Stock let you just wiping the data. custom recoveries give a lot of space to manage your device, such as: flashing, format specific partitions, removing password, backups, restoring,...etc
2- No, it's temporary solution for now you can root your device through fastboot.
Abdullah.Csit said:
1- Stock let you just wiping the data. custom recoveries give a lot of space to manage your device, such as: flashing, format specific partitions, removing password, backups, restoring,...etc
2- No, it's temporary solution for now you can root your device through fastboot.
Click to expand...
Click to collapse
Thanks! - following up:
1. Can we flash .zip roms with PE recovery? Or do we have to do it through fastboot as well?
2. For root, is the process as this one here? https://c.mi.com/thread-1843805-1-0.html
3. When updated ROM comes out (e.g. MIUI 12.5?) do we have to flash recovery from scratch again?
bomberb17 said:
Thanks! - following up:
1. Can we flash .zip roms with PE recovery? Or do we have to do it through fastboot as well?
2. For root, is the process as this one here? https://c.mi.com/thread-1843805-1-0.html
3. When updated ROM comes out (e.g. MIUI 12.5?) do we have to flash recovery from scratch again?
Click to expand...
Click to collapse
1- it's should be able for that's.
2- Yes, use the Fastboot method.
3- I didn't understand this point. But it seems you asking if everything will done by just flash the recovery rom then yes. It's will be done just hit reboot to system after flashing finished. Then you ready to go
bomberb17 said:
Thanks! - following up:
1. Can we flash .zip roms with PE recovery? Or do we have to do it through fastboot as well?
2. For root, is the process as this one here? https://c.mi.com/thread-1843805-1-0.html
3. When updated ROM comes out (e.g. MIUI 12.5?) do we have to flash recovery from scratch again?
Click to expand...
Click to collapse
Until I know with the PE recovery you need to use sideload method to flash.
Abdullah.Csit said:
It's an explanation for why we use "boot" command on cmd not the "recovery" command.
anyway, it's temporary method.
-Note edited.
thanks for you understanding
Click to expand...
Click to collapse
Welll umm there is no recovery partition...(Our dev said the same and checked the fastboot roms too no recovery partition exists and boot partition is handling boot and recovery images)
And flashing recovery in boot partition permanently replaces stock recovery
So its not a temporary method its permanent for us....
My 7-day wait for Mi Unlock ends tomorrow (my phone is sunny). So I suppose no TWRP recovery? Will try the PE recovery.. Fingers crossed!
bomberb17 said:
My 7-day wait for Mi Unlock ends tomorrow (my phone is sunny). So I suppose no TWRP recovery? Will try the PE recovery.. Fingers crossed!
Click to expand...
Click to collapse
Only try pe recovery on 12.0.4
On other versions something things will break like wifi etc
And if you want to root on other versions
Use the boot image patching
Ok so I installed PE recovery under 12.0.4. It showed as "Active slot b", not sure what this means or if this makes any difference.
I must say its not useful compared to stock recovery.
Here are all the options it had:
Reboot system now
Apply update -> Apply from ADB
Factory reset
Advanced -> Enter fastboot, Reboot to bootloader, Reboot to recovery, View recovery logs, Power off.
So no wipe cache/dalvik (most important), no install .zip, no backup/restore. Also was getting some random system error messages which didn't look good.
The phone then updated itself to 12.0.5. The rom was replaced with stock rom by itself. No point in doing the whole process from scratch, given the reported glitches.

Categories

Resources