Cannot Unlock Bootloader: Unlock Data unavailable - Android Q&A, Help & Troubleshooting

I am trying to unlock bootloader of my MotoG5s plus (XT1804) but had no luck
Everytime I use command: fastboot oem get_unlock_data,
I get following error message: (bootloader)Unlock Data Unavailable.
I have checked OEM unlocking and USB Debugging but problem still persists.
Also, I have been gone through Motorola forms and google but got no solution.
When I use fastboot getvar all I get, (bootloader) cid: 0x0000
Please Help:crying:
Any Help would be appreciated:angel:
P.S.: I still posted my problem at Motorola page
Here for more details:
Message Number: 4549
https://forums.lenovo.com/t5/MOTOROLA-Android-Developer/Bootloader-Unlock-Problems/m-p/4131133/highlight/true#M9174

SuperSaket said:
I am trying to unlock bootloader of my MotoG5s plus (XT1804) but had no luck
Everytime I use command: fastboot oem get_unlock_data,
I get following error message: (bootloader)Unlock Data Unavailable.
I have checked OEM unlocking and USB Debugging but problem still persists.
Also, I have been gone through Motorola forms and google but got no solution.
When I use fastboot getvar all I get, (bootloader) cid: 0x0000
Please Help:crying:
Any Help would be appreciated:angel:
P.S.: I still posted my problem at Motorola page
Here for more details:
Message Number: 4549
https://forums.lenovo.com/t5/MOTOROLA-Android-Developer/Bootloader-Unlock-Problems/m-p/4131133/highlight/true#M9174
Click to expand...
Click to collapse
yaaa mee tooo

Related

Honor 4a unlock bootloader very hard

Hello guys, first thank you for a job you do, then here I purchased an Honor 4A I know a smartphone by rooter against my bootloader Honor my phone makes me sick, I managed to have on my mobile in fastboot UNLOCK, and the DC-unlocker software
Found Phone: SCL-AL00
Model: Huawei phone in Fastboot Mode
Serial NR. : 76P4C15B17037722
Firmware: SCL-AL00C00B220
Boot info:
*******************************************
Bootloader Lock State: UNLOCKED
Root State: ROOT
Check System: PASS
Bootloader WidevineKey: WidevineKey_VALID
System State: UNLOCKED state in Bootloader
but I found a problem when I type the command fastboot oem device-info
I get tampered Device: false
Device unlock: false
Unable shot rooter my mobile even after the trial of 10 of the best known applications.
It like the unblocking half done
Thank you a lot to help me
PS: i have the ROM stocks from HUAWEI CHINA and i tape fastboot oem unlock XXXXXXXXXXXXXXXX for uncloking my phone and it tell me OKAY
soulaymane26 said:
Hello guys, first thank you for a job you do, then here I purchased an Honor 4A I know a smartphone by rooter against my bootloader Honor my phone makes me sick, I managed to have on my mobile in fastboot UNLOCK, and the DC-unlocker software
Found Phone: SCL-AL00
Model: Huawei phone in Fastboot Mode
Serial NR. : 76P4C15B17037722
Firmware: SCL-AL00C00B220
Boot info:
*******************************************
Bootloader Lock State: UNLOCKED
Root State: ROOT
Check System: PASS
Bootloader WidevineKey: WidevineKey_VALID
System State: UNLOCKED state in Bootloader
but I found a problem when I type the command fastboot oem device-info
I get tampered Device: false
Device unlock: false
Unable shot rooter my mobile even after the trial of 10 of the best known applications.
It like the unblocking half done
Thank you a lot to help me
PS: i have the ROM stocks from HUAWEI CHINA and i tape fastboot oem unlock XXXXXXXXXXXXXXXX for uncloking my phone and it tell me OKAY
Click to expand...
Click to collapse
How did u unlock ur HUAWEI HONOR?
Which model is my HUAWEI please reply!
EMUI 3.1
Model number: SCL-TL00
Android version 5.1.1
Kernel version: 3.10.49-g60d039f
[email protected] #1
I saw 4glite when phone start
Hello guys, is there any way to install gapps on my huawei honor 4a (4g lte)?? Please any help including rooting is appreciated

Does anyone has alternative way to unlock bootloader?

My phone's bootloader is locked. My phone has a replaced motherboard which isn't unlocking. The motorola website is showing that it is not qualified for bootloader unlock. Guys help me if anyone get any solution my code is
3A55640206602954#5A58314233323439384200585431303232000000#7CB38EF02F495B40ED4A135B509807FC5E701F99#D5E1E701120000000000000000000000
Having the same issue. I checked with previously unlocked devices and it also states that is does not qualify for bootloader unlocking. I think something is wrong with the website.
3A55640206602954#5A5831423332343938420058543130323 2000000#7CB38EF02F495B40ED4A135B509807FC5E701F99#D 5E1E701120000000000000000000000
As you've posted it, there's space between characters (red marked)
Make sure there's no space in between while submitting it to motorola.
I have the same problem. The sited seems to be bugged. First of all the "request unlock key" button does not show, so i disabled the "noShow" css class but the form just returns a 404.
My Id is: 3A35130836952835#5A58314232334636485300585431303231000000#7562C1A6784903BB7AD8E04369B8FAB9B2BCBC73#29AE1904120000000000000000000000
Isn0gud93 said:
I have the same problem. The sited seems to be bugged. First of all the "request unlock key" button does not show, so i disabled the "noShow" css class but the form just returns a 404.
My Id is: 3A35130836952835#5A58314232334636485300585431303231000000#7562C1A6784903BB7AD8E04369B8FAB9B2BCBC73#29AE1904120000000000000000000000
Click to expand...
Click to collapse
Site is up and running fine.
The "request unlock key" won't show until you enter a valid id.
Edit : Just tried your id and it worked fine I got your unlock code.
-z3r0- said:
3A55640206602954#5A5831423332343938420058543130323 2000000#7CB38EF02F495B40ED4A135B509807FC5E701F99#D 5E1E701120000000000000000000000
As you've posted it, there's space between characters (red marked)
Make sure there's no space in between while submitting it to motorola.
Click to expand...
Click to collapse
Still didn't work...Suggest some means of unlocking please or if you are getting key then send it plz..
Proble to Unlock Bootloader moto G 3nd xt1548 republic wireless
friend. in advance, I appreciate who can help.
following the steps of unlocking the bootloader of my phone request by unlocking console:
F: \ TOOLS> fastboot oem get_unlock_data
...
(bootloader) 9900057518377830 # 5A59323232374D
(bootloader) 334346004D6F746F4733000000 # 6CDB
(bootloader) 59D8507BF3906AC2EA22DD640BE1209
(bootloader) 4656B # 9A90BB0A00000000000000000
(bootloader) 0000000
Then edit it leaving this way:
9900057518377830#5A59323232374D334346004D6F746F4733000000#6CDB59D8507BF3906AC2EA22DD640BE12094656B#9A90BB0A00000000000000000000000000
I enter those commands in the Motorola page and it tells me that my device is not a candidate for unlocking bootloader.
try to update it with the rom of the same model éro from another company and now it does not leave the fastboot
Rahul Bagga said:
My phone's bootloader is locked. My phone has a replaced motherboard which isn't unlocking. The motorola website is showing that it is not qualified for bootloader unlock. Guys help me if anyone get any solution my code is
3A55640206602954#5A58314233323439384200585431303232000000#7CB38EF02F495B40ED4A135B509807FC5E701F99#D5E1E701120000000000000000000000
Click to expand...
Click to collapse
I'v had similar problems in the past try a different internet browser
Unable to unlock bootloader facing the problem of not qualify to unlock bootloader

After hardbricked ..

My Moto Z XT1650-03 was hardbricked, finally after several days I found a blankfiles that worked with my version, however as soon as the phone started in fastboot I verified that the bootloader was blocked, hence I am not able to install recovery or any ROM, I have already tried several ROMS, I tried to install by RSD but with the bootloader blocked there is always the same error, when I try to unlock the bootloader the following error appears: (bootloader) Check 'Allow OEM Unlock' in Android Settings> Developer)
Any solution?
*My bootloader is in version 91.08, but the newest ROM I found is with version 91.07, may be why I can not update with adb?
https://imgur.com/a/Qwpz5

"The System has been Destroyed" after re-lock the bootloader

Dear all,
I bought Mi Pad 4 and it was running well, and I want to update the ROM. The device is comes with Locked bootloader.
I unlocked my Mi Pad 4 using MI Unlock. And when I try to relock it using "fastboot oem lock" command, it become suddenly comes with black screen with written: "The system has been destroyed. Press power button to shutdown".
So I entered the fastboot mode and try some command/solutions:
- My device status is locked:
E:\Minimal ADB and Fastboot>fastboot oem device-info
...
(bootloader) Verity mode: true
(bootloader) Device unlocked: false
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: true
OKAY [ 0.006s]
finished. total time: 0.006s
- I can't unlock it using Mi Unlock:
- Flashing using MiFlashalso not allowed since it is still locked:
- I tried to unlock using fastboot, also failed:
E:\adb>fastboot oem unlock
...
FAILED (remote: Token Verify Failed, Reboot the device
)
finished. total time: 0.003s
- The faastboot screen in my mi pad is only for around 10 Second. After that it goes to "The System has been Destroyed" stage...
Any help is appreciated, because I cant use it anymore...
Why did you even want to close the BL again?!? I dont understand anyone who does that.
And AFAIK you can flash an original Image from Xiaomi even with locked BL. But I have never done it and the guide shows a working phone..
http://en.miui.com/thread-835254-1-1.html
You need the Mi-Flash Tool. And these damn Indian people with their fake titles on youtube.. The title is english and the freaking video is hindi or whatever.. SO ANNOYING!!!
Hi, the tutorial you gave is for 'normal' xiaomi phone, where it boot normally (even its BL is locked).
In my case, I cant load the BL (It said: Destroyed). The only thing I can do is restart to fastboot state, and after 20 seconds it goes again to Destroyed state.
Ok, so I have read some other threads and what seems the "only" solution is to unlock the bootloader again.. But the other people had no problem running "oem unlock".. And you get an error, what is kinda strange.
What happens in MiUnlock? Error?
Hi, I think the main problem is current status is "The System has been Destroyed", therefore it cannot load the BL.
Meanwhile, the BL is in Locked status. So it need to be un-locked first, so I can load the new ROM.
MIUnlock is error, it said: "Current account is not bound to this device", which is strange, because previously I unlocked using it before.
I assume MIUnlock said this because the status of "System destroyed"...
Never lock if there is not 100% Xiaomi official rom inside, and better use MiFlash with "clean all and lock" option for locking.
Thanks for your suggestion. Will do that after I fix this problem..
I think you have a bricked device.. Some devices have this "test-pins", where you can enable some debug-bridge and there you could flash it (mi5 or redmi5 was that in that thread). I dont know if the Pad4 has such Pins and you would have to open the whole device.. (its not something you can access from the outside).
But I dont know if the Pad has these test-pins, just because another Xiaomi device had it..
Noted on that, but too risky for me to open the case..
Any other solution would be really appreciated.
thE_29 said:
But I dont know if the Pad has these test-pins, just because another Xiaomi device had it..
Click to expand...
Click to collapse
On some devices you have to login your Mi Account with MiFlash when flashing in EDL mode and account needs special permissions.
P.Kosunen said:
On some devices you have to login your Mi Account with MiFlash when flashing in EDL mode and account needs special permissions.
Click to expand...
Click to collapse
Yup, and I cant do that since cannot load the BL, because it's "Destroyed" right now..
Up.
Does anyone have the solution on this?
Thanks.
Seemed "bricked" to me, welcome to the bricked world dude, I have had 2 beautiful paper holder on my desk.
mac_erot said:
Up.
Does anyone have the solution on this?
Thanks.
Click to expand...
Click to collapse
The only solution was already posted several times -> open device, find test-pins, use them and flash ROM. And yet, you still ignore it everytime. THERE is no other solution for bricked devices.
And: NEVER close the bootloader again on NON official ROMs.
2 ways to try out...
1st run
"fastboot flashing unlock"
2nd
"fastboot oem reboot EDL"
Or this link if the command doesn't work
https://www.google.com/amp/s/forum....e-how-to-reboot-to-edl-fastboot-t3394292/amp/
go to service centre they will be able to restore the device using edl i hope
I tried also all solutions, but nothing helped. EDL, fastboot, etc.
If there is a way to unlock the BL again I can go on. Otherwise there will be no chance for me to get it running.
Has anyone got a solution how I can unlock the BL again? Or flash with locked BL?
Thanks!
maluc said:
I tried also all solutions, but nothing helped. EDL, fastboot, etc.
If there is a way to unlock the BL again I can go on. Otherwise there will be no chance for me to get it running.
Has anyone got a solution how I can unlock the BL again? Or flash with locked BL?
Thanks!
Click to expand...
Click to collapse
Looks like it is straightforward to remove the back cover. Perhaps you can find the EDL test points on the motherboard?
https://www.youtube.com/watch?v=RZpj0k9HKTQ
Is there no possibility to enable USB Debugging without entering the miui surface?
maluc said:
I tried also all solutions, but nothing helped. EDL, fastboot, etc.
If there is a way to unlock the BL again I can go on. Otherwise there will be no chance for me to get it running.
Has anyone got a solution how I can unlock the BL again? Or flash with locked BL?
Thanks!
Click to expand...
Click to collapse
Edl with test points should work, try some different ones, maybe the ones you are trying are wrong
---------- Post added at 06:47 AM ---------- Previous post was at 06:47 AM ----------
Also, try to run fastboot erase vbmeta

[Yu Yutopia (5050)] No OEM Unlock Option in Developer Options

Hey All!
I recently(2 days back) purchased a Yu Yutopia running android 5.1.1. I enabled developer options, but it didn't have the OEM unlock option. And whenever i go into fastboot, and type
Code:
fastboot -i 0x2A96 oem unlock
it says
FAILED (remote: unknown command)
finished. total time: 0.008s
Click to expand...
Click to collapse
.. Any help would be appreciated. I went through tons of documentation. the only thing missing for now is the Yutopia Drivers. Is that the problem? If so, can someone share the driver packs? This thread had it, but the link is broken, and is old.
If in Android -> Settings -> Developer options -> OEM unlock option isn't present then unlocking phone's bootloader is denied, you can't unlock it by means of Fastboot.
May be you can obtain from OEM/Carrier an unlock-key. Contact them.
BTW: You always can check Android's system file named build.prop for device's bootloader-unlock capability
Code:
adb devices
adb shell "getprop ro.oem.unlock_supported"
If the device supports "fastboot flashing unlock", then the returned value is 1
Soham41 said:
Hey All!
I recently(2 days back) purchased a Yu Yutopia running android 5.1.1. I enabled developer options, but it didn't have the OEM unlock option. And whenever i go into fastboot, and type
Code:
fastboot -i 0x2A96 oem unlock
it says .. Any help would be appreciated. I went through tons of documentation. the only thing missing for now is the Yutopia Drivers. Is that the problem? If so, can someone share the driver packs? This thread had it, but the link is broken, and is ol
Click to expand...
Click to collapse
Same here tried everything from flashing in EDL mode to downloading Yuware and trying to unlock bootloader. The adb commands
Code:
getprop sys.oem_unlock_allowed
getprop ro.oem_unlock_supported
both return blank. Using Miracle box software to check device info returns Bootloader : unknown. Trying to root via Miracle Box, Kingroot and other methods fails. The original Signed Android 5.1.1 based CM signed zips also won't flash via Recovery and the links are also almost non existent for those. Any hope of finding a original CM firmware to flash via QFIL is very slim. There has to be some way to get it working, there was a YouTube video showcasing the YU Yutopia on Stock Android 5.1.1 Engineering build that now doesn't have the OEM Unlock option only if someone would help. Getting it rooted somehow god knows how is the only option to get started.
Don't waste more time with trying to unlock phone's bootloader: it's NOT supported.
if anyone interested, I made some modifation in stock rom, so it is rooted, without unlocking bootloader, here is the link of my thread
Yu Yutopia (Yu5050) (Sambar) Stock engineering rom, rooted (Android 5.1)
For those interested, this is exactly engineering rom, with added modified patched boot, so it is rooted with magisk. v23 This is the detailed install procedure: You need to download the following: 1. YU_Yutopia_YU5050_V1_24.12.15 rom, link give...
forum.xda-developers.com

Categories

Resources