[OREO 8.0] [Stock, Deodex] Xperia X F512x ROMs - Sony Xperia X ROMs, Kernels, Recoveries, & Other D

Hi! I Want to Share with you official Stock Clean Deodex Zipalign ROMs kernel pathed, DRM-fix included
It's a base for development and is ready for modifications like eXposed etc. or for patch ROMs (like an eXistenZ O ROM etc.)
Download:
Now I have deodexed .50 FW (for eXistenZ O v6.0.0):
F5121 download (MEGA)
F5122 download (MEGA)
Deodex .85 FW
F5121 download (MEGA)
F5122 download (MEGA)
Latest Stock Deodex .118 FW (for eXistenZ O v7.0.0):
F5121 download (MEGA)
F5122 download (MEGA)
folder with ROMs
ROMs tested on both devices F5121 and F5122 so enjoy.
before installing:
make shure you have unlocked bootloader and backup DRM-keys with Dirty Caw exploit
Have allready installed latest SONY FW with Flashtool or Emma for latest bootloader
Backup all your Data before wipe
Installation:
1) Copy Deodexed ROM zip into a memory card or internal phone storage
2) Install TWRP 3.x.x
3) Go to TWRP and make wipe (data, system, cache, dalvik cache)
4) Go to Install section of TWRP and navigate to zip location
5) install zip with Full Deodex ROM
6) restart the phone with TWRP
7) wait while bootable
8) enjoy
if you need root or other addons make shure you have boot ROM first. Don't flash all zips mods after ROM installation it cause a bootloop and you will wipe and install the ROM again

Have good battery? What hours on display? Is interesing

Raulxperrx said:
Have good battery? What hours on display? Is interesing
Click to expand...
Click to collapse
Like on Stock FW, the ROMs have not any modification, so battery life is the same as on stock. You can mod it by yourself.

can u make one for f5122 from. 266 7.0

why is it not installing on my F5122? I am trying to install .85 FW but while flashing its showing Error 7, this zip is for SUZU DSDS device but this is a SUZU device.
I am using TWRP 3.2.2

kloroform said:
why is it not installing on my F5122? I am trying to install .85 FW but while flashing its showing Error 7, this zip is for SUZU DSDS device but this is a SUZU device.
I am using TWRP 3.2.2
Click to expand...
Click to collapse
Fixed, try download again and install.

lubik1 said:
Fixed, try download again and install.
Click to expand...
Click to collapse
Now flashing is fixed but ROM is not working, there is just a black screen after the Bootloader unlocked warning screen.

Can you make a deodex of the latest .97 stock?

Could you do a download mirrors in GDrive?

updated. add latest .118 FW

lubik1 said:
updated. add latest .118 FW
Click to expand...
Click to collapse
Will it work with F5122?

twain55 said:
Will it work with F5122?
Click to expand...
Click to collapse
Added ROM for F5122

Question - why whole rom? Are there other things modified besides /system/ (app, priv-app, framework, vendor)? I'm asking because of my problems with deodexing XC, as I mentioned to you. What files or folders are changed besides /system? Thanks

levone1 said:
Question - why whole rom? Are there other things modified besides /system/ (app, priv-app, framework, vendor)? I'm asking because of my problems with deodexing XC, as I mentioned to you. What files or folders are changed besides /system? Thanks
Click to expand...
Click to collapse
That's a Full ROM Deodex, for who, who want flash once ROM with Full Wipe from recovery and don't want search a reasons - why his phone does not boot properly... If you wanna Patch a Stock Odex System from recovery - This thread for you.
there are many kitchens on XDA (free and not) what Deodex fully and partially (make patch) for Odexed ROM, so just search it.

lubik1 said:
That's a Full ROM Deodex, for who, who want flash once ROM with Full Wipe from recovery and don't want search a reasons - why his phone does not boot properly... If you wanna Patch a Stock Odex System from recovery - This thread for you.
there are many kitchens on XDA (free and not) what Deodex fully and partially (make patch) for Odexed ROM, so just search it.
Click to expand...
Click to collapse
Thanks
I have not had any problems deodexing or making patches or zips. I've been doing it since LP, and haven't had any problems. TOAD worked fine to deodex the whole 118 system (/app, /priv-app, /framework, and /vendor/framework), and flash it, but there's some problem. I flash clean stock rom, flash deodex with wipe, and no other mods, and it boots fine and all apps work, but it's slow and laggy (sticky, stuttering). That's why I wondered if maybe something else in / might need to be modified. The error in locating is 'can't create image space from image file system/framework/boot.art... Only Zygote can create global boot image'.

levone1 said:
Thanks
That's why I wondered if maybe something else in / might need to be modified. The error in locating is 'can't create image space from image file system/framework/boot.art... Only Zygote can create global boot image'.
Click to expand...
Click to collapse
Try Deodex with Superr's Kitchen (i think your problem was in Deodexer)

lubik1 said:
Try Deodex with Superr's Kitchen (i think your problem was in Deodexer)
Click to expand...
Click to collapse
You were right - SuperR did it. I posted your xposed fix in xc thread. Let me know if OK.

levone1 said:
You were right - SuperR did it. I posted your xposed fix in xc thread. Let me know if OK.
Click to expand...
Click to collapse
no problem! good job!

This is my daily ROM. Its perfect for daily use.
Stock Oreo + Debloated + Magisk + Xposed <3

F5122,
Am getting boot loop .I was using AOSP P.Please help.I am not able to enter recovery too,

Related

[ROM][4.3][C5306][STOCK][.201] C5306 Stock ROM rooted and recoverys [Updated .205].

This is an stock rom of xperia SP C5306 (AMERICAS-LTE and TELCEL-LTE) , is rooted and have three recovery's (Philz, TWRP and CWM Touch). It's original without modifications (except added su and recoverys).
Requeriments:
Any rooted C5306 with recovery.
Locked bootloader (unlocked can flash any rom and kernel via fastboot or flashtool).
Flashtool
Click to expand...
Click to collapse
Features:
Stock ROM of C5306 - AMERICAS_LTE 4.3 (12.1.A.1.201)
Stock ROM of C5306 - TELCEL-LTE (12.1.A.1.201)
SU (Rooted)
Recoverys (PhilZ Touch, TWRP and CWM Touch)
ZipAligned.
Click to expand...
Click to collapse
Install:
Download C5306_12.1.A.1.201_1272-4529_su_recoverys.zip and C5306_12.1.A.1.201_AMERICAS-LTE_WS.ftf.
Copy the C5306_12.1.A.1.201_1272-4529_su_recoverys.zip in your microSD
Reboot into recovery.
Wipe data, cache and dalvik cache.
Install the C5306_12.1.A.1.201_1272-4529_su_recoverys.zip.
Reboot the phone and wait some minutes for first boot (this version have kernel included, you not need flash C5306_12.1.A.1.201_AMERICAS-LTE_WS.ftf but you can flash it if you need update the baseband).
Click to expand...
Click to collapse
The rom are rooted but i don't add supersu or supersuser app, if you need superuser app, you can download too and flash it in recovery (in recovery you have super user permitions).
For enter in recoverys:
at blue led or vibrate press:
Volume Up for Philz Touch
Volume Down for TWRP
Camera button for CWM Touch.
Click to expand...
Click to collapse
The ftf file have all of original rom (kernel, fota, baseband, userdata, cache, lta label) except system and partition (this is flashed in recovery). i only Zipalign the apps for memory optimization.
added TELCEL-LTE version too, if you like install this version only replace C5306_12.1.A.1.201_AMERICAS-LTE_su_recoverys.zip with Telcel Zip.
Enjoy :good:
Downloads:
AMERICAS-LTE 12.1.A.1.205:
C5306_12.1.A.1.205_ROOT_1272-4529_AMERICAS-LTE_signed.zip 801.8 MB UPDATED
AMERICAS-LTE Baseband:
C5306_12.1.A.1.205_AMERICAS-LTE_WS.ftf 16.6 MB UPDATED
TELCEL-LTE 12.1.A.1.205:
C5306_12.1.A.1.205_ROOT_1271-7717_TELCEL-LTE_signed.zip 743.9 MB UPDATED
TELCEL-LTE Baseband:
C5306_12.1.A.1.205_TELCEL-LTE_WS.ftf 16.6 MB UPDATED
old's
AMERICAS LTE:
C5306_12.1.A.1.201_1272-4529_su_recoverys.zip 801.9 MB
TELCEL:
C5306_12.1.A.1.201_TELCEL-LTE_su_recoverys.zip 743.9 MB
FTF (optional for baseband update, flash it after install the zip):
AMERICAS-LTE:
C5306_12.1.A.1.201_AMERICAS-LTE_WS.ftf 16.6 MB
TELCEL:
C5306_12.1.A.1.201_TELCEL-LTE_WS.ftf 16.6 MB
SuperSU (optional):
UPDATE-SuperSU-v1.93.zip 1.2 MB
Click to expand...
Click to collapse
Credits:
@DooMLoRD for updater script
@Phil3759 for Philz Touch
@teamwin for TWRP
@FXP for CWM Touch.
@Chainfire for SuperSU
Sony for ROM.
dssmex said:
This is an stock rom of xperia SP C5306 (AMERICAS_LTE), is rooted and have three recovery's (Philz, TWRP and CWM Touch). It's original without modifications (except added su and recoverys).
Requeriments:
Features:
Install:
The rom are rooted but i don't add supersu or supersuser app, if you need superuser app, you can download too and flash viar recovery (in recovery you have super user permitions).
For enter in recoverys:
The ftf file have all of original rom (kernel, fota, baseband, userdata, cache, lta label) except system and partition (this is flashed in recovery). i only Zipalign the apps for memory optimization.
Enjoy :good:
Downloads:
Credits:
@DooMLoRD for updater script
@Phil3759 for Philz Touch
@teamwin for TWRP
@FXP for CWM Touch.
@Chainfire for SuperSU
Sony for ROM.
Click to expand...
Click to collapse
Can you make a flashable zip of the recoveries?
So that it cn be integrated with roms
Thanks
dipesh1502 said:
Can you make a flashable zip of the recoveries?
So that it cn be integrated with roms
Thanks
Click to expand...
Click to collapse
pease don't quote the OP, i do a flashable ZIP but i don't test it.
download from here:
recoverys_signed_031814_112330.zip - 9.32 MB
Click to expand...
Click to collapse
warning: maybe only work in stock roms or roms without recoverys preinstalled.
Please post if work or not.
dssmex said:
pease don't quote the OP, i do a flashable ZIP but i don't test it.
download from here:
warning: maybe only work in stock roms or roms without recoverys preinstalled.
Please post if work or not.
Click to expand...
Click to collapse
Will try and report
Are You ok if I integrate it in my rom ??credits to u
thanks
dipesh1502 said:
Will try and report
Are You ok if I integrate it in my rom ??credits to u
thanks
Click to expand...
Click to collapse
no problem, you can use my work if add credits.
Got the same question. As you may have seen I am providing some pre rooted stock ROMS. Is it okay if I provided the zip in my thread so that users can flash this after flashing pre rooted stock rom
mrjraider said:
Got the same question. As you may have seen I am providing some pre rooted stock ROMS. Is it okay if I provided the zip in my thread so that users can flash this after flashing pre rooted stock rom
Click to expand...
Click to collapse
everyone can use my work, only add credits. :highfive:
I tested the zip on my phone and it worked fine, but I already had installed recoverys.
I use the file recoverys_signed_031814_112330.zip
Thanks! Didn't know you updated it with Philz - re-installed your latest.
Great work its work perfect
added updated version of 12.1.A.1.201 and added TELCEL-LTE version (of mexico).
enjoy :good:. All version rooted and with recoverys.
the link of AMERICA-LTE KERNEL is encrypted.... What's the key????
MrChicken148 said:
the link of AMERICA-LTE KERNEL is encrypted.... What's the key????
Click to expand...
Click to collapse
sorry, link repaired.
https://mega.co.nz/#!GN0GSBgK!CcqjwbkNjC8q9-TlHCMcO_i9CBfgJV72KkulWRMUGJI
update
update to .205 please
fer45 said:
update to .205 please
Click to expand...
Click to collapse
+1
Sent from my C5303 using XDA Premium 4 mobile app
fer45 said:
update to .205 please
Click to expand...
Click to collapse
Roms updated. The baseband for americas-lte is missing, i will post it tonight.
chikrron said:
+1
Sent from my C5303 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
already updated
Hey valedor xD!!!
I'm in your .201 telcel version, to install the .205 version I need to wipe something??
Thanks
Gracias amigo
DanyBerumen said:
Hey valedor xD!!!
I'm in your .201 telcel version, to install the .205 version I need to wipe something??
Thanks
Gracias amigo
Click to expand...
Click to collapse
You need clean cache and dalvik cache, all system partition Will be erased
Enviado desde mi C5306 mediante Tapatalk
thanks

[ROM] Stock Android L 5.0.0 r2 LRX21M ZIP & IMG

Hi guys!
I have just compiled Android AOSP Lollipop 5.0.0_r2 from Google latest sources and want to share with you.
No changes from me, super clean build. Keep in mind it's built with older preview binaries like all other ROMs.
Download flashable ZIP:
http://bit.ly/LRX21M
Instruction:
1.Boot into recovery
2.Flash attached zip
3.Flash GAPPS
4.Reboot and ejnoy!
Download IMG files:
http://bit.ly/LRX21M-IMG
Instruction:
1.Unpack files in android developer tools/platform-tools (where is your fastboot.exe placed)
2.Boot into bootloader
3.Run flash-all.bat file
4.Done! Enjoy!
For GAPPS flash TWRP recovery and correct zip file
Suggested GAPPS: https://drive.google.com/file/d/0B0LnTbgUOuxYTk5VS0tmbENqQzA/view
If you want to support student and his work:
First!! I flash this now
Thanks for rom, but what is correct gapps?
Racpu_ said:
Thanks for rom, but what is correct gapps?
Click to expand...
Click to collapse
Added in OP
Cannot get the the gapps seems its been downloaded to many times. Thanks for this though any links to other gapps ?
Sent from my Nexus 5 using XDA Premium HD app
sorry, this is the ultimate rude question but, how's this different from the other roms built from source with Lollipop 5.0.0_r2
katsumeiyo said:
sorry, this is the ultimate rude question but, how's this different from the other roms built from source with Lollipop 5.0.0_r2
Click to expand...
Click to collapse
It's built a bit later, didn't check it really, maybe it cointains more changes. But even now there are few new commits in AOSP, not included yet in any ROM.
mastero9017 said:
It's built a bit later, didn't check it really, maybe it cointains more changes. But even now there are few new commits in AOSP, not included yet in any ROM.
Click to expand...
Click to collapse
any changes to the illusionL gapps? https://www.androidfilehost.com/?fid=95784891001606650
katsumeiyo said:
any changes to the illusionL gapps? https://www.androidfilehost.com/?fid=95784891001606650
Click to expand...
Click to collapse
It's their own mirror of gapps.
IMG files added in OP!
Niiiiice
Woops! wrong thread
What is the difference between the lollipop binaries and offical binaries? Like functionaily wise
Does this contain SuperSU, or do I need to flash after install?
Whenever I try to flash, it tells me that there is no OS installed when I try to reboot.
NO OS install like another L thread.
Deleted
Sorry op for posting link
Worked for me. I flashed a factory image of kitkat, then factory reset, then flashed twrp recovery, and then flashed this zip with the gapps for lollipop hosted by cyanogen.
Got root by flashing supersu's modded kernel and then supersu update zip.
All apps were automatically backed up after boot, but there is one strange thing:
Google play keeps telling me Google plus is incompatible. Is this something wrong with the Rom? Or lollipop? Or something else??
ps000000 said:
NO OS install like another L thread.
Click to expand...
Click to collapse
Just reboot.
Merckle said:
What is the difference between the lollipop binaries and offical binaries? Like functionaily wise
Click to expand...
Click to collapse
Just updated drivers really. There currently aren't any lollipop binaries that are available. Unless you can pull them from the current preview. However, you can use the preview binaries or the 4.4.4 ones until the new ones drop. I used the preview ones, but haven't been able to flash it yet.
Jnn1 said:
Worked for me. I flashed a factory image of kitkat, then factory reset, then flashed twrp recovery, and then flashed this zip with the gapps for lollipop hosted by cyanogen.
Got root by flashing supersu's modded kernel and then supersu update zip.
All apps were automatically backed up after boot, but there is one strange thing:
Google play keeps telling me Google plus is incompatible. Is this something wrong with the Rom? Or lollipop? Or something else??
Click to expand...
Click to collapse
Where are there cm gapps you speak of??
Edited : found them here https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141106-signed.zip
Thanks for the rom!

[GUIDE] Helper zips to switch between OOS 3.0 and OOS 2.2.1 firmware

At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
We are waiting for AD release. At least a beta?
mido25 said:
We are waiting for AD release. At least a beta?
Click to expand...
Click to collapse
Don't you know how to use the JustArchi's github?
Wow, really helps. I wish I have my OnePlus2 now.
Guihardrock said:
Don't you know how to use the JustArchi's github?
Click to expand...
Click to collapse
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
mido25 said:
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
Click to expand...
Click to collapse
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Guihardrock said:
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Click to expand...
Click to collapse
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
mido25 said:
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Lost recovery
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
JustArchi said:
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
Click to expand...
Click to collapse
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
eswa1068 said:
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
Click to expand...
Click to collapse
Use fastboot to flash the recovery
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
Thank you Sir
Tierri said:
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
Click to expand...
Click to collapse
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
amit_sen said:
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Yes. See the images to help you.
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
It's around 900 mb zip..?
And did anyone try that build..?
Mohit31 said:
It's around 900 mb zip..?
And did anyone try that build..?
Click to expand...
Click to collapse
Its because of the aroma you can choose the gapps of your choice...
Guihardrock said:
Its because of the aroma you can choose the gapps of your choice...
Click to expand...
Click to collapse
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
This thing should be STICKY
Finally was able to install CM13 properly using this recovery without Google Services crashing.
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
Now i am in oos3 but when justarchi release archidroid i wont use any other rom, i had so great experience with this on my s3
Edit: i am gonna try it :3 yo made me do it
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
rom is smooth as h*ll and battery is better than in normal cm13 but as i said the backed dont work yet :3 and aroma is not fully functional with the bootanimation and root (but the rom has the cm superuser)

Galaxy J727P New updated Deodexed ROM J727PVPU4ARG2 AN FIRMWARE files

New updated Deodexed Rom An firmware files J727PVPU4ARG2 !
install rom with twrp factory reset wipe system install rom zip then wipe casha an dikvik casha an boot ! Builds 1 an 2 use twrp 3.2.1_1 if you use 3.2.3_0 you will get error 7 for now !
#1 https://mega.nz/#!vR1Wmaaa!KVIYprMOKtkm7ipCyV172Vm3MpyCtaO61YlUOof2N6c
This Rom was built using ASSAYYED Kitchen !
It has build prop tweaks an int.d tweaks from the Kitchen !
It also has bin an xbin Tweaks from TomeGJ7p wifi build !
more Tweaks may be added but we will see what works as fare as adding more tweaks I will let ever one know an I will be building a cut down build soon enjoy !
NEW build added in xposed framework an app !
Build #2 8/4/2018 Added Xposed framework an app !
https://mega.nz/#!HAcTiK4A!mCRuGSdf_KKrOAJ090XdOpUDW17IYT_PjszDI864pUM
New build this is my Final build for this firmware update it is my personal build hope you like it ! build #3
https://mega.nz/#!PBcQ2IgD!ujN1Z9r0txt1KVdNY7lcgSr2I8LZpoqM_ykdIF6GqsU
this is the firmware file zip install using odin 3.12.5 or newer an a big thanks goes out to spaceminer for this firmware file !!
https://mega.nz/#!vYs0ma5Q!mxOKpZEmOztR29zYkVoT2dXSuALdRyhnYOi1ZP5mbQs
Firmware files are now up on SAMMOBILE web site !
Here are links for xposed for the people that want them
https://mega.nz/#!7QVWRBqC!_uoZbkLSLbJawNd3P7aJRNlCeNzKVlklgKE9uRGhi6w
An the apk
https://mega.nz/#!TEcxmAgQ!bCkqQBVxahScyk_jdWDirL9eRPOmBna787td3pOQClc
Updated root method?
I attempted root via https://forum.xda-developers.com/galaxy-j7/development/root-sm-j727p-galaxy-j7-perx-td-lte-t3611202
And although saying it succeeded in odin my J727PVPU4ARG2
Did not root. Not looking for custom recovery because I have no ad card and do not plan on flashing anything else anytime soon. Anyone have an updated tar or what I need to root. J727PVPU4ARG2
Is the newest update.
J727P root update
SHAD0WUSER said:
I attempted root via https://forum.xda-developers.com/galaxy-j7/development/root-sm-j727p-galaxy-j7-perx-td-lte-t3611202
And although saying it succeeded in odin my J727PVPU4ARG2
Did not root. Not looking for custom recovery because I have no ad card and do not plan on flashing anything else anytime soon. Anyone have an updated tar or what I need to root. J727PVPU4ARG2
Is the newest update.
Click to expand...
Click to collapse
Read this link an download twrp !
https://forum.xda-developers.com/galaxy-j7/development/recovery-twrp-3-1-1-x-galaxy-j727p-t3692663
In short install twrp flash superSu 2.8.2 zip using twrp !
#1 factory reset phone in stock recovery pull an place battery boot download mod in Odin uncheck auto restart an flash twrp pull an replace battery boot into twrp flash superSu zip !
peter couniaz said:
Read this link an download twrp !
https://forum.xda-developers.com/galaxy-j7/development/recovery-twrp-3-1-1-x-galaxy-j727p-t3692663
In short install twrp flash superSu 2.8.2 zip using twrp !
#1 factory reset phone in stock recovery pull an place battery boot download mod in Odin uncheck auto restart an flash twrp pull an replace battery boot into twrp flash superSu zip !
Click to expand...
Click to collapse
Will do soon as I can get an sd card lol, thank you!
SHAD0WUSER said:
Will do soon as I can get an sd card lol, thank you!
Click to expand...
Click to collapse
If you have twrp use magisk, put it on internal sd, flash in recovery but only on stock boot image, if you are on custom Rom magisk will not install.
Sent from my SM-J727P using Tapatalk
Bee101 said:
If you have twrp use magisk, put it on internal sd, flash in recovery but only on stock boot image, if you are on custom Rom magisk will not install.
Sent from my SM-J727P using Tapatalk
Click to expand...
Click to collapse
The guide for installing twrp on my J727PVPU4ARG2 says you have to format data before flashing anything because it is encrypted.
SHAD0WUSER said:
The guide for installing twrp on my J727PVPU4ARG2 says you have to format data before flashing anything because it is encrypted.
Click to expand...
Click to collapse
That is correct, to format data just type yes and swipe, then flash magisk.
Sent from my SM-J727P using Tapatalk
Bee101 said:
That is correct, to format data just type yes and swipe, then flash magisk.
Sent from my SM-J727P using Tapatalk
Click to expand...
Click to collapse
And wiping data would erase anything saved on the internal sd... You are wrong. You need an sd card.
I borrowed one and rooted btw.
Added new build !
peter couniaz said:
New updated Deodexed Rom An firmware files J727PVPU4ARG2 !
install rom with twrp factory reset wipe system install rom zip then wipe casha an dikvik casha an boot !
#1 https://mega.nz/#!vR1Wmaaa!KVIYprMOKtkm7ipCyV172Vm3MpyCtaO61YlUOof2N6c
This Rom was built using ASSAYYED Kitchen !
It has build prop tweaks an int.d tweaks from the Kitchen !
It also has bin an xbin Tweaks from TomeGJ7p wifi build !
more Tweaks may be added but we will see what works as fare as adding more tweaks I will let ever one know an I will be building a cut down build soon enjoy !
NEW build added in xposed framework an app !
Build #2
https://mega.nz/#!HAcTiK4A!mCRuGSdf_KKrOAJ090XdOpUDW17IYT_PjszDI864pUM
this is the firmware file zip install using odin 3.12.5 or newer an a big thanks goes out to spaceminer for this firmware file !!
https://mega.nz/#!vYs0ma5Q!mxOKpZEmOztR29zYkVoT2dXSuALdRyhnYOi1ZP5mbQs
Here are links for xposed for the people that want them
https://mega.nz/#!7QVWRBqC!_uoZbkLSLbJawNd3P7aJRNlCeNzKVlklgKE9uRGhi6w
An the apk
https://mega.nz/#!TEcxmAgQ!bCkqQBVxahScyk_jdWDirL9eRPOmBna787td3pOQClc
Click to expand...
Click to collapse
Added new Build today 8/4/2018
Added Final build today 8/11/2018
peter couniaz said:
New updated Deodexed Rom An firmware files J727PVPU4ARG2 !
install rom with twrp factory reset wipe system install rom zip then wipe casha an dikvik casha an boot !
#1 https://mega.nz/#!vR1Wmaaa!KVIYprMOKtkm7ipCyV172Vm3MpyCtaO61YlUOof2N6c
This Rom was built using ASSAYYED Kitchen !
It has build prop tweaks an int.d tweaks from the Kitchen !
It also has bin an xbin Tweaks from TomeGJ7p wifi build !
more Tweaks may be added but we will see what works as fare as adding more tweaks I will let ever one know an I will be building a cut down build soon enjoy !
NEW build added in xposed framework an app !
Build #2 8/4/2018 Added Xposed framework an app !
https://mega.nz/#!HAcTiK4A!mCRuGSdf_KKrOAJ090XdOpUDW17IYT_PjszDI864pUM
New build this is my Final build for this firmware update it is my personal build hope you like it ! build #3
https://mega.nz/#!PBcQ2IgD!ujN1Z9r0txt1KVdNY7lcgSr2I8LZpoqM_ykdIF6GqsU
this is the firmware file zip install using odin 3.12.5 or newer an a big thanks goes out to spaceminer for this firmware file !!
https://mega.nz/#!vYs0ma5Q!mxOKpZEmOztR29zYkVoT2dXSuALdRyhnYOi1ZP5mbQs
Firmware files are now up on SAMMOBILE web site !
Here are links for xposed for the people that want them
https://mega.nz/#!7QVWRBqC!_uoZbkLSLbJawNd3P7aJRNlCeNzKVlklgKE9uRGhi6w
An the apk
https://mega.nz/#!TEcxmAgQ!bCkqQBVxahScyk_jdWDirL9eRPOmBna787td3pOQClc
Click to expand...
Click to collapse
just Adding a New build build 8/11/2018
Anyone having trouble with Instagram running this?It says device not compatible the playstore?Not sure what's going on thought I did something wrong but flash 4 different time's still the same.
J727P
TJj33p3rz said:
Anyone having trouble with Instagram running this?It says device not compatible the playstore?Not sure what's going on thought I did something wrong but flash 4 different time's still the same.
Click to expand...
Click to collapse
Sorry I toke out everything that you need to make Instagram work I can build one that will have it working it needs all the Facebook apps an Facebook installer app put back in an then it should work !
J727P
peter couniaz said:
Sorry I toke out everything that you need to make Instagram work I can build one that will have it working it needs all the Facebook apps an Facebook installer app put back in an then it should work !
Click to expand...
Click to collapse
Try build #3 That's the one I'm running Instagram installed just fine !!
peter couniaz said:
Try build #3 That's the one I'm running Instagram installed just fine !!
Click to expand...
Click to collapse
I can't download from mega now says I'm at my quota grrr lol
J727P
TJj33p3rz said:
I can't download from mega now says I'm at my quota grrr lol
Click to expand...
Click to collapse
I guess can you try again tomorrow ! I don't know what other clod I can use for free to get it to you I do these builds with donations !
peter couniaz said:
I guess can you try again tomorrow ! I don't know what other clod I can use for free to get it to you I do these builds with donations !
Click to expand...
Click to collapse
Its all good bro I'll try tomorrow thanks for your hard work.
J727P
TJj33p3rz said:
Its all good bro I'll try tomorrow thanks for your hard work.
Click to expand...
Click to collapse
For now use twrp 3.2.1_1 to install zips 1 an 2 if you use 3.2.3_0 You will get error 7 !

Xposed on Xperia X Oreo 8.0

Is there a way to install the Xposed Framework on the Xperia X with 34.4.A.2.118?
I have UB, root with Magisk with TWRP.
I need help please.
Not for the time being. There's a conflict with security patch which makes the phone go into bootloop. I started with match security patch.
https://forum.xda-developers.com/xperia-x/themes/oreo-xposed-framework-fix-t3861292
Try this
XGEN rom
bootloop on this rom
https://forum.xda-developers.com/xp...m-1-0-5-xperia-x-t3778738/page13#post78164516
wangkeing said:
bootloop on this rom
https://forum.xda-developers.com/xp...m-1-0-5-xperia-x-t3778738/page13#post78164516
Click to expand...
Click to collapse
I try for this rom and it boots successfully.
First you factory reset your device, flash this rom with magisk and selinux permissive. Wait for first boot, then you can flash fix xposed and after that flash xposed.
Good luck!
Flash the official version and works fine
RenkaHinkaru said:
I try for this rom and it boots successfully.
First you factory reset your device, flash this rom with magisk and selinux permissive. Wait for first boot, then you can flash fix xposed and after that flash xposed.
Good luck!
Click to expand...
Click to collapse
I failed again.
1. wipe data/system/cache
2. flash XGEN ROM with magisk and selinux permissive
3. Wait for first boot, and do nothing,then reboot to Recovery
4. flash fix xposed
5. flash xposed-v90-sdk26-arm64-beta3.zip
6. reboot! but the phone bootloop
Maybe I should install the latest .118 firmware through FlashTool again, or xposed version is wrong?
wangkeing said:
I failed again.
1. wipe data/system/cache
2. flash XGEN ROM with magisk and selinux permissive
3. Wait for first boot, and do nothing,then reboot to Recovery
4. flash fix xposed
5. flash xposed-v90-sdk26-arm64-beta3.zip
6. reboot! but the phone bootloop
Maybe I should install the latest .118 firmware through FlashTool again, or xposed version is wrong?
Click to expand...
Click to collapse
My Xposed Fix is only for Stock .118 Deodexed FW and on eXistenZ v7.0.0 includes by default.
You cant use it on every ROM you want becouse it's a system files (framework,jar and services,jar)
all developers makes modifications on this files to make a "mods", so if a custom ROM have difference from stock fw.118 it cause a bootloop.
I can make a fix for you, if you give me a framework.jar and services,jar from this ROM
lubik1 said:
My Xposed Fix is only for Stock .118 Deodexed FW and on eXistenZ v7.0.0 includes by default.
You cant use it on every ROM you want becouse it's a system files (framework,jar and services,jar)
all developers makes modifications on this files to make a "mods", so if a custom ROM have difference from stock fw.118 it cause a bootloop.
I can make a fix for you, if you give me a framework.jar and services,jar from this ROM
Click to expand...
Click to collapse
Thank you very much.
https://drive.google.com/file/d/1lnl6T2Q1zpjaRdelNMvVc56uKIWTWs4Z/view?usp=sharing
wangkeing said:
Thank you very much.
https://drive.google.com/file/d/1lnl6T2Q1zpjaRdelNMvVc56uKIWTWs4Z/view?usp=sharing
Click to expand...
Click to collapse
View attachment 4650477
RenkaHinkaru said:
I try for this rom and it boots successfully.
First you factory reset your device, flash this rom with magisk and selinux permissive. Wait for first boot, then you can flash fix xposed and after that flash xposed.
Good luck!
Click to expand...
Click to collapse
Do you have probleme with fingerprint sensor ? I update Version 1.1-0 (20181017, final) and got this issue.
and are you still on this ROM? Could you please backup you system with xposed fix from twrp and send to me?
I
wangkeing said:
Do you have probleme with fingerprint sensor ? I update Version 1.1-0 (20181017, final) and got this issue.
and are you still on this ROM? Could you please backup you system with xposed fix from twrp and send to me?
I
Click to expand...
Click to collapse
Im using stock rom bro, i dont know.
You can post it in the xgen rom thread
RenkaHinkaru said:
Im using stock rom bro, i dont know.
You can post it in the xgen rom thread
Click to expand...
Click to collapse
Is that stock rom path 6.0 base on stock 34.4.A.2.118 firmware?

Categories

Resources