I have recently changed the huawei y6 compact dice layer on my mobile phone, everything went wrong but I have the old glue and the touch layer sticks over the edge of my cellphone. Every single use of a cell phone has fallen on a zen and since I click (press) the touchpad on the cell so the cellphone turns off and after a while the heat starts to peel away What can it be? touch cord is not damaged even cable.
Related
Hello,
Recently my phone dropped and half of my touch screen stopped working. I have disassembled my phone just to try if the old lcd will work when I plug the connector out and in again. I discovered that no so I have ordered the new LCD. During the reparation I accidentally broke coaxial cable between the antenna and motherboard so I ordered the new one. Now phone worked, but there was no phone signal but display and everything else worked just fine. I have disassembled the phone again when the new coaxial cable arrived but I have discovered, that I have bought bad one because it did not work. So I left the phone disassembled and wait for another one.
After I assembled the phone with the second coaxial cable my phone does not show nothing on the screen, even on the old LCD. When I connect phone to the pc I got instantly to the fastboot and I can get out of it. After fastboot reboot I get again to the fastboot.
Sometimes the LCD powers up but does not show nothing, and when the phone is in the charger the diode is red.
Does anybody have any idea how can I fix this problem?
I have tried to boot the phone without camera, speaker, antena, but nothing worked.
Hey there. I really need someone's help here. See, my Samsung Galaxy S3 has survived a lot of throws, drops, scuffs and scratches and it works great. However I hit the final blow last night when my phone broke into a few pieces. Now it's all back together the only damage done is ;
The Case is deformed
The Front Glass is cracked
And the touch screen no longer lights up nor does it respond to any touch input.
I'm trying to find a way to project my phone's screen onto my laptop without the use of apps or extra cables. Only cable I have is the standard USB Charging Cable. Is there any way I can use this alone and a WIFI Connection to display my phones screen onto my laptop?
The power button on a samsung note 2 that I inherited fails to work. The phone was left outside and rained on so when I first got it the screen did not work and I thought it was going to be trash however after drying it out and properly cleaning it the device screen works now and it will turn on when plugged in. I have one of the dongles that forces the phone into recovery but the power button just plain does not work. I don't know what to do but I would like to be able to use this phone.
I've dismantled a few of these phones and once I ruined a power button while sliding the the tool past it to pop the case apart. The power button is part of another assembly but can be replaced. Any version of the phone (Sprint/ATT/etc) will use the same subassembly for the power button. If that is the problem, you can swap it out.
Otherwise, you may have corrosion issues. I have brought older "dumb" phones back by spraying the circuit boards w/electrowash cleaner, scrubbing w/a toothbrush, and blowing off with an air compressor. Be sure to remove all ribbon connectors and scrub both sides of the connector. Also: DON'T JUST SPRAY THE PHONE WITH THE BACK OFF! the electrowash will stay visible the display, so do this in a controlled manner.
I would like to ask if someone else experience crazy touchscreen behavior while your m4 aqua usb is in use, be it charging or data transfer. Its impossible to type, as it type at random or close/open almost every app or menu. But once I remove the usb cable it works proporly. I have a glass screen protector, but I really don't see how it would be connected with this misbehavior.
OS: 26.1.B.3.109, locked bootloader , unrooted.
touchscreens work by closing a circuit between screen and your finger..when electricity passes through cables it creates a magnetic field..what type of glass screen protector are you using..link to it?i have one too but i haven't got any problems like these
GerasxD said:
touchscreens work by closing a circuit between screen and your finger..when electricity passes through cables it creates a magnetic field..what type of glass screen protector are you using..link to it?i have one too but i haven't got any problems like these
Click to expand...
Click to collapse
Sorry, I had to put a generic one [cheap chinese], as I couldn't found any branded in my local market. Though I just tried and it was working just fine with 100% battery, maybe its related to the a low battery state. Will try later.
Thanks for the repy.
Hello, I use my N9 almost daily, mainly for reading and watch Netflix.
The other day the touchscreen stopped working, maybe for a fall from the bed....
Everything Is perfect, even the lcd. What can It be?
I tried to open it and detach and reattach some of the cables but not sure which is the touchscreen cable...
Do i have ti buy a whole new screen?