Weird lockscreen bug on newer Oreo roms - Xiaomi Redmi Note 3 Questions & Answers

I face this weird bug in newer Oreo ROMs where sometimes after rebooting the phone and when I enter my password on the lockscreen, the screen goes black and returns to the lockscreen. I faced this on latest Nos,ABC,arrow ROM, mokee ROM etc. If I want to enter into the phone then I have to remove the password from recovery. Anyone facing this issue

I faced it too on dotos

,
smatm said:
I faced it too on dotos
Click to expand...
Click to collapse
Did u face it any other roms, also which recovery

tom jp said:
,
Did u face it any other roms, also which recovery
Click to expand...
Click to collapse
no, I was on gsi rom for a while,then came back to dotos kenzo , faced that bug
recovery is twrp by atg-droid

smatm said:
no, I was on gsi rom for a while,then came back to dotos kenzo , faced that bug
recovery is twrp by atg-droid
Click to expand...
Click to collapse
Ok

tom jp said:
Ok
Click to expand...
Click to collapse
what happens after flashing lockscreen fixer ?
can I readd password ?

tom jp said:
I face this weird bug in newer Oreo ROMs where sometimes after rebooting the phone and when I enter my password on the lockscreen, the screen goes black and returns to the lockscreen. I faced this on latest Nos,ABC,arrow ROM, mokee ROM etc. If I want to enter into the phone then I have to remove the password from recovery. Anyone facing this issue
Click to expand...
Click to collapse
kindly refer to this thread its permanent solution is https://forum.xda-developers.com/re...x-wierd-lockscreen-bug-treble-treble-t3827445

Ishaan Kaushal said:
kindly refer to this thread its permanent solution is https://forum.xda-developers.com/re...x-wierd-lockscreen-bug-treble-treble-t3827445
Click to expand...
Click to collapse
Any easier fix, thanks for the help

tom jp said:
Any easier fix, thanks for the help
Click to expand...
Click to collapse
if there would be an easier fix then why have written this tough fix?
only way to fix this issue is too follow full procedure
if u dont believe on it whether try yourself because 3 friends tried and they also solved it by this method

It was probably magisk issue
nathanchance said:
also @D-m-x (and everyone else), please try this Magisk build (it can be installed in the modules tab in Magisk Manager)
https://transfer.sh/YVFdi/Magisk-v16.7-1674-.zip
It includes a commit that should fix all of the weird issues with Magisk like the PIN not being accepted after a reboot or the phone getting stuck at the Google logo with the progress bar. The root cause is services crashing during the boot chain and either causing deadlock or lack of functionality. It's entirely possible that a service crashed during boot and started causing issues.
Click to expand...
Click to collapse
Please refer to this post, thanks to @nathanchance

Dims_Camper said:
Please refer to this post, thanks to @nathanchance
Click to expand...
Click to collapse
can you re upload it ?

smatm said:
can you re upload it ?
Click to expand...
Click to collapse
Always first flash twrp official in fastboot when u come from miui. Dont flash any other recovery.
And format data using only with twrp official. Other twrp have problems decrypting miui encrypted data.
Coz It throw error when u use format data command to decrypt miui using redwolf and fox recovery.
And if u used treble twrp and cardinal treble and any other treble rom then wipe cust, vendor before u flash non treble rom.

smatm said:
can you re upload it ?
Click to expand...
Click to collapse
Latest magisk merged it already, that old magisk is no longer usable

Ishaan Kaushal said:
if there would be an easier fix then why have written this tough fix?
only way to fix this issue is too follow full procedure
if u dont believe on it whether try yourself because 3 friends tried and they also solved it by this method
Click to expand...
Click to collapse
Well, he might have written the tough fix because maybe he doesn't know about the easier fix. God, stop being arrogant.

Instagram : rishabh.rajbhar
Text me i will guide you

Related

[ROM]cm 12 20141204 build cancro unofficial

Note: Whoever is able to boot into the rom without system ui fc pls post
1. The ROM which u were running before
2. CWM recovery version/link to that.
3. And step wise info of flashing.
4. And if installed gapps then link to that
This can help other users. Thanx
While everyone was searching for an ANDROID L AOSP by Ivan I found this on miui forum.
A bootable CM12 .
The screenshots i have posted.
The bug we are facing in this is unlimited system ui fc's. But the rom is booting and some what working too. if we can give our contribution we might have everything working.
Found from:
http://www.miui.com/thread-2152863-1-1.html
Credits also to him.
download link:
https://www.androidfilehost.com/?fid=95832962473396938
PS I know there are many posts on this but people might not know about this release so creating a new one
And yeah this isn't my work
yes tried it too same FCs problem. hope the guy who made that could say few words about it!
Did you try flash gapps for android 5.0 ?
hiphopboy said:
Did you try flash gapps for android 5.0 ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=57254997&postcount=77
I mean flash cm gapps ! He flash gapps mini i think from another source
i tried with normal gapps found here in the forum, not cm gapps. do you have a link for the cm gapps? so I may try with them too when I have got some spare time
I think here : http://www.naldotech.com/download-and-install-gapps-for-android-5-0-lollipop/
But is it really gapps related issue ?
Archmag3 said:
But is it really gapps related issue ?
Click to expand...
Click to collapse
don't think so, because even without flashing gapps, you continuosly get the system UI FCs since first boot
Testing
Used this rom for few minutes and found the following bugs :- wifi,bluetoots,brightness,sensors,Reboot as soon as screen is locked lol
No fc's for me
Can make and receive calls
maybe if we work together to fix the bugs this rom might become stable
Method of install :- Wipe data flash rom and reboot....
moly82 said:
don't think so, because even without flashing gapps, you continuosly get the system UI FCs since first boot
Click to expand...
Click to collapse
seems more like framework related issue...expert opinion needed. btw is someone keeping check on that thread in miui forum ?
gau20 said:
Used this rom for few minutes and found the following bugs :- wifi,bluetoots,brightness,sensors,Reboot as soon as screen is locked lol
No fc's for me
Can make and receive calls
maybe if we work together to fix the bugs this rom might become stable
Method of install :- Wipe data flash rom and reboot....
Click to expand...
Click to collapse
did the same, didn't work here.
just curious, maybe a language problem? Actually here it automatically selected Italian language during wizard. What language are you using?
Most of us are not even successful in making up with the fcs. But still happy about the fact that there is some progress in the development. But we all must be eagerly waiting for Ivan's lollipop
moly82 said:
did the same, didn't work here.
just curious, maybe a language problem? Actually here it automatically selected Italian language during wizard. What language are you using?
Click to expand...
Click to collapse
I just flashed the rom, wiped data and rebooted
no setup wizard direct home screen without any force close.
maybe try flashing these gapps.... http://fitsnugly.euroskank.com/dl.php?file=banks/gapps/gapps-L-minimal-signed-11-23-14.zip
Does someone know if the dev published the device tree used to compile the rom?
I guess he used github.com/keyur2maru/android_device_xiaomi_cancro since it's his and seems updated to L.
gau20 said:
I just flashed the rom, wiped data and rebooted
no setup wizard direct home screen without any force close.
maybe try flashing these gapps.... http://fitsnugly.euroskank.com/dl.php?file=banks/gapps/gapps-L-minimal-signed-11-23-14.zip
Click to expand...
Click to collapse
getting the FCs even without the gapps, so it is not a gapps problem for me. what language are you on after flashing the rom and correctly getting to the homescreen?
NisseCool said:
I guess he used github.com/keyur2maru/android_device_xiaomi_cancro since it's his and seems updated to L.
Click to expand...
Click to collapse
Yes you are right. This is what i also came to know.
gau20 said:
Used this rom for few minutes and found the following bugs :- wifi,bluetoots,brightness,sensors,Reboot as soon as screen is locked lol
No fc's for me
Can make and receive calls
maybe if we work together to fix the bugs this rom might become stable
Method of install :- Wipe data flash rom and reboot....
Click to expand...
Click to collapse
What was your;
CWM version and link?
ROM before flash?
And any settings related to how your phone boots?
Thanks.
PS: Going to try flashing it, just going to make a backup real fast.
gau20 said:
Used this rom for few minutes and found the following bugs :- wifi,bluetoots,brightness,sensors,Reboot as soon as screen is locked lol
No fc's for me
Can make and receive calls
maybe if we work together to fix the bugs this rom might become stable
Method of install :- Wipe data flash rom and reboot....
Click to expand...
Click to collapse
Did you install gapps?

Are these functions broken or is it only me having problems?

As you can see in the screenshot, the /cache partition is not being used at all. Changing partition format to f2fs also doesn't help. What a wasted amount of storage...
My second problem is the automatic time settings. They are not working at all, don't sync. I'm facing this problem since late December builds of 2017 across all oreo roms.
Anyone facing the same problems?
Have you tried official twrp,if official still don't work then flash miui fastboot rom
[email protected] said:
Have you tried official twrp,if official still don't work then flash miui fastboot rom
Click to expand...
Click to collapse
It's not the recovery's fault, I read somewhere that since Android O, the cache partition won't be used anymore so it makes sense, but I had such problem on nougat roms too, since Guyver kernel days...
Actually, that automatic time detection is more important to me, do you have such problem?
Try flashing miui fastboot rom
mehrshad.shafaghi said:
It's not the recovery's fault, I read somewhere that since Android O, the cache partition won't be used anymore so it makes sense
Click to expand...
Click to collapse
?
onliner said:
?
Click to expand...
Click to collapse
Oreo? Weird
mehrshad.shafaghi said:
Oreo? Weird
Click to expand...
Click to collapse
Dont panic. Twrp shows wrong info. Use disk info app from playstore.

Sim not detected on some pie rom

Hi,
On some pie ROM, my sim is not detected at boot, need to do Soft reboot, or sometimes, nothing work, need change ROM .
I already try to change my sim card and same issue ...
Anyone have same issue ?
Find solution?
Need u, please help me ! ?
Thanks
Oreo is perfect .
for some little issues pie is not suit for daily use
https://forum.xda-developers.com/redmi-note-4/xiaomi-redmi-note-4-snapdragon-roms-kernels-recoveries--other-development/rom-syberia-project-t3846212
This pie I had used,SIM feature is OK
Ok but I'm testers (official, no flasholic)
So need to know why I have issue on some pie ROM and not on other pie ROM... And need to know if it's only me (my phone) or lot of peeps...
Thanks
billouetaudrey said:
Ok but I'm testers (official, no flasholic)
So need to know why I have issue on some pie ROM and not on other pie ROM... And need to know if it's only me (my phone) or lot of peeps...
Thanks[/QUOTE
I had faced the same issue while flashing unofficial lineage OS 16 and also while flashing AEX Pie but that was because of corruption in my firmware so I changed my firmware by flashing the firmware first then my ROM and this solve my problem hope it helps you
Click to expand...
Click to collapse
Bhanu_p_mishra said:
billouetaudrey said:
Ok but I'm testers (official, no flasholic)
So need to know why I have issue on some pie ROM and not on other pie ROM... And need to know if it's only me (my phone) or lot of peeps...
Thanks[/QUOTE
I had faced the same issue while flashing unofficial lineage OS 16 and also while flashing AEX Pie but that was because of corruption in my firmware so I changed my firmware by flashing the firmware first then my ROM and this solve my problem hope it helps you
Click to expand...
Click to collapse
Hey, I already try to change FW a lot of time ? (stable and beta)
Which FW do u flash ?
Click to expand...
Click to collapse
billouetaudrey said:
Bhanu_p_mishra said:
Hey, I already try to change FW a lot of time ? (stable and beta)
Which FW do u flash ?
Click to expand...
Click to collapse
This one, order of flashing matters in my case
Wiped all partition(except internal storage, USB otg) - >flash firmware - >rom
https://mega.nz/#!jEkRHJJa!XrlsHz3P8_px5f7WAgo_MdEttRA0O8OJZ0w1jgM0Cyw
Click to expand...
Click to collapse
Bhanu_p_mishra said:
billouetaudrey said:
This one, order of flashing matters in my case
Wiped all partition(except internal storage, USB otg) - >flash firmware - >rom
https://mega.nz/#!jEkRHJJa!XrlsHz3P8_px5f7WAgo_MdEttRA0O8OJZ0w1jgM0Cyw
Click to expand...
Click to collapse
Seem to be OK ! Let me try lot of other rom , And I will conclude this !!!
Thanks very much
Click to expand...
Click to collapse
Finally don't help me
I flash Havoc, seem to be ok
I flash LOS, OK
I flash Havoc and restore data partition, not ok... Need to hot reboot for have simd detection
Had the same problem. Found a fix, just rename the simcard that does not get detected (name doesent matter). As soon as you click on ok, you are asked to type in your simcard pin and then it works fine.
I have this issue on ArrowOS for mido. Its an easy fix (at least for me).
Original: Link

Fingerprint is not working on any custom rom mido

I have an unlocked bootloader. The fingerprint is not working on any custom rom when I tap on fingerprint nothing happens, it don't even show any messege.
It is working correct on stock rom.
I tried pixel experience, lineage os, aosp extended and all other roms.
I have tried flashing stock rom then other custom rom but it's still not working.
Any suggestion is appreciated.
Thanks
krishna.rag said:
I have an unlocked bootloader. The fingerprint is not working on any custom rom when I tap on fingerprint nothing happens, it don't even show any messege.
It is working correct on stock rom.
I tried pixel experience, lineage os, aosp extended and all other roms.
I have tried flashing stock rom then other custom rom but it's still not working.
Any suggestion is appreciated.
Thanks
Click to expand...
Click to collapse
I am able to add one but same problem for another finger.
if I added second user than fingerprint didn't work.
i also tried in most of ROMs but same problem.
1. Clean fingerprint scanner
2. Change firmware
3. Delete fingerprints from android folder, reboot
I think that firmware has a problem too. I recently experience some clean flash on any pie rom that has a problem with FP at times
kamalder said:
I am able to add one but same problem for another finger.
if I added second user than fingerprint didn't work.
i also tried in most of ROMs but same problem.
Click to expand...
Click to collapse
Yeah, I am just using a single user still not able to add even a single fingerprint.
amnher said:
I think that firmware has a problem too. I recently experience some clean flash on any pie rom that has a problem with FP at times
Click to expand...
Click to collapse
I tried latest global beta and latest stable but still facing the same.
If you tell me which one worked for you then I'll be very thankful. ?
mindblower01 said:
1. Clean fingerprint scanner
2. Change firmware
3. Delete fingerprints from android folder, reboot
Click to expand...
Click to collapse
Tried not working.
But one thing that I have observed is whenever I add another user it works for the other user and in guest mode as well but only not working for admin user.
I had the same issue. I downloaded older version of the gapps and I fix the issue.
flash this file from twrp i think your problem will be solved
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks buddy, it worked
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
REALLY GOOD JOB. THANKS A LOT! I spend more than a week looking for a solution.
It's working. Thank you very much. My was working partially, now this perfect, rom AOSP Extended Pie.
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thank you sir! It is working again (Arrow-v9.0-mido-OFFICIAL-20190327)
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
really thanks dude. It works. thanks again!
Thank you so much
Thank you so much, fingerprint scanner now works
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks a ton
Worked for me . Iam using the CAF version of pixel experience (15/06)
mindblower01 said:
1. Clean fingerprint scanner
2. Change firmware
3. Delete fingerprints from android folder, reboot
Click to expand...
Click to collapse
I'm sorry I'm new to this, may I know how to change the firmware
Update,, I found the answer, I can flash it after the Rom
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks a lot working perfectly.:laugh::laugh:
ismail.ahmed84 said:
flash this file from twrp i think your problem will be solved
Click to expand...
Click to collapse
Thanks alot brother
was searching for this for the last 3 days
thank you soo much
i tested many ways , many Roms and kernels , with encryption and without!
just with flashing this , it solved

Pixel Experience Poco F1 Touch/Stuck Issue

I installed pixel experience (not caf) rom today on my poco F1 and the look and feel is great..but when I'm using it the touch isnt working sometimes it stucks. Only fix is to lock and unlock phone again ..then after couple minutes the issue will appear again need help
I have the same issue
If anyone knows how to fix this please help me!! Much appreciated
What version of the vendor did you flash?
It needs to be higher than 9.2.15
riseofsand said:
What version of the vendor did you flash?
It needs to be higher than 9.2.15
Click to expand...
Click to collapse
beryllium-9.4.1-9.0
I am using pixel experience CAF version and vendor 9.4.1... there is no touch issues .. try CAF version and clean flash it
This happens for me too whenever I have TWRP recovery installed, with any ROM (both stock *and* custom ones). I only get this behaviour when entering my SIM cards PIN code or when booting TWRP (I can't swipe so I must turn the screen off, wait for about 5 seconds, then turn it in again)
On PE aosp u can flash miui kernel and fix it! Idk about caf.
What touch panel do you have? check out my thread https://forum.xda-developers.com/poco-f1/help/damn-screen-freezes-t3912069
vamshikailasa said:
I am using pixel experience CAF version and vendor 9.4.1... there is no touch issues .. try CAF version and clean flash it
Click to expand...
Click to collapse
Did u use aosp version? What is the most stable ? Most battery efficient? More smooth? Can u tell me answers for each questions? Thanks alot
Mooatreides said:
On PE aosp u can flash miui kernel and fix it! Idk about caf.
What touch panel do you have? check out my thread https://forum.xda-developers.com/poco-f1/help/damn-screen-freezes-t3912069
Click to expand...
Click to collapse
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
Is it correct?
u wont face any touch issues if u use 9.3.28 kernel, only stock kernel has no issues with touch, idk if pe will boot with it or not... try it yourself, bt i am sure that 9.3.28 has the best touch drivers.
gigishan said:
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
Is it correct?
Click to expand...
Click to collapse
Well try man and see, go for aosp
U can just take the boot.img from miui also only. On PE
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Mooatreides said:
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Click to expand...
Click to collapse
Hahaha yeah man thank u so much for the help
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
I already have PE aosp installed with 9.5.8-9.0 vendor-firmware on my Poco F1. Is it alright to flash just the MIUI kernel (kernel-beryllium_global_9.4.8-ak2.zip) and nothing else?
Or do I need to repeat the whole flashing firmware / installing PE OS thing?
Mariorio said:
I already have PE aosp installed with 9.5.8-9.0 vendor-firmware on my Poco F1. Is it alright to flash just the MIUI kernel (kernel-beryllium_global_9.4.8-ak2.zip) and nothing else?
Or do I need to repeat the whole flashing firmware / installing PE OS thing?
Click to expand...
Click to collapse
Just flash the kernal alone you will be fine
Will just leave it here. Hope someone finds it useful.
I fixed the screen freeze issue using the vendor-firmware and kernel fix on the links below:
Files:
beryllium-9.4.12-9.0-vendor-firmware.zip
kernel-beryllium_global_9.4.12-ak2.zip​
Links here.
Also, I am on Lineage OS, latest build.
Thank you for this thread!
gigishan said:
FINALLY!!!!
I flashed these :
beryllium-9.4.8-9.0-vendor-firmware.zip
kernal-beryllium_global_9.4.8-ak2.zip
ITS WORKING NOW - YET I'LL LET KNOW IF THE ISSUE STILL EXISTS SOMEHOW THANK YOU EVERYONE WHO HELPED ME
Click to expand...
Click to collapse
Same problem here since couple of weeks. Flashed these using lastest build of Nitrogen OS and everything is working fine so far! Thank you
Mooatreides said:
MAZAL TOV man! enjoy the good life with no freezes lol. Its like having a tooth hurt forever and you forgot what normal was, then all of a sudden no freezing screen pain hahah!
Click to expand...
Click to collapse
Edu Lezcano said:
Same problem here since couple of weeks. Flashed these using lastest build of Nitrogen OS and everything is working fine so far! Thank you
Click to expand...
Click to collapse
Will these vendor and kernel combo work for the latest Pixel Experience update(05082019)?

Categories

Resources