*DISCLAIMER : I am not responsible for any damage to your device*
After a lot of troubleshooting I got the stereo speaker mod to work on this device, all thanks to such a helpful community.
Download [Stereo Speaker Mod] : DRIVE
darkwader18701 said:
Guys im using latest havoc rom this mod works my steps:
Magisk have to be installed, if you using xperia music app delete it before you continue!!!
1.freeze musicfx.apk with titanium backup
2.flash in twrp this viper mod https://androidfilehost.com/?fid=11410932744536985061
follow the instructions in twrp when it starts to install viper mod, select always volume up button
reboot
3.freeze Audio settings 1.0.apk in titanium backup
4.flash acervenky's dual speaker mod
5.enjoy
I don't promiss that will work in miui or other roms, as i wrote im using latest havoc rom.
Both of them isn't my work everybody should know that. Im just figured out how to works on my device.
Gesendet von meinem MI 8 mit Tapatalk
Click to expand...
Click to collapse
Requirements :
Magisk
How To Install :
Simply add the mod in Magisk or Flash via TWRP.
How To Uninstall :
Just uninstall the module from Magisk.
Changelog :
Code:
v1 - Initial Release
Special Thanks To @xdamami for providing the mixer file& initial testing.
I had to go through several threads in order to port this mod.
Credits :
magura320
SpasilliumNexus
DorianX
chdloc
Dante63
Regards,
acervenky
Awesome Mode! Who think low volume just try this mod. Hope u will update this thread with dual speaker mod.))
Works fine on Mi Mix 2s with V8.8.9 EU Rom. Many thanks.
Gesendet von meinem MIX 2S mit Tapatalk
acervenky said:
*DISCLAIMER : I am not responsible for any damage to your device*
This mod will boost the volume of speaker & headphones.
The boost is safe to use as I've not increased gain above the safety thresholds.
DOWNLOAD : DRIVE
Requirements :
Magisk
How To Install :
Simply add the mod in Magisk or Flash via TWRP.
How To Uninstall :
Just uninstall the module from Magisk.
Special Thanks To @xdamami for providing the mixer file& initial testing.
Regards,
acervenky
Click to expand...
Click to collapse
Hello and thank you for this
Could you please tell us the numbers that you increased the volume. Thank you again
It doesn't work for me. I can't see any difference.
Sent from my MI 8 using Tapatalk
Work for mi 8 se?
Great work, thanks you!!!!!
not work, better use dolby to boost speaker.
acervenky said:
*DISCLAIMER : I am not responsible for any damage to your device*
This mod will boost the volume of speaker & headphones.
The boost is safe to use as I've not increased gain above the safety thresholds.
DOWNLOAD : DRIVE
Requirements :
Magisk
How To Install :
Simply add the mod in Magisk or Flash via TWRP.
How To Uninstall :
Just uninstall the module from Magisk.
Special Thanks To @xdamami for providing the mixer file& initial testing.
Regards,
acervenky
Click to expand...
Click to collapse
dude could you make dual speaker mod? i would test it, it doesn't care mixer files or magisk module.
greetings
Gesendet von meinem MI 8 mit Tapatalk
Suryadixl92 said:
not work, better use dolby to boost speaker.
Click to expand...
Click to collapse
Do you have working Dolby Atmos ?
Sent from my Redmi Note 3 using Tapatalk
Great module.great work.now waiting for dual speaker
Dexer125 said:
Do you have working Dolby Atmos ?
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
im using viper android with razor surround +50 bass convolver, here's the link for the convolver:
https://www106.zippyshare.com/v/bWqN7YT0/file.html
you have to copy this to root/ViPER4Android/Kernel
Gesendet von meinem MI 8 mit Tapatalk
Dexer125 said:
Do you have working Dolby Atmos ?
Click to expand...
Click to collapse
yes i have....
Suryadixl92 said:
yes i have....
Click to expand...
Click to collapse
could you share with us?
Gesendet von meinem MI 8 mit Tapatalk
this module works for Mi 8SE???
Can someone confrim that it really works? I'm interested in buying the phone but the low speaker volume is bothering me.
Thanks!
installed, but not sure if it does actally work, the difference is not noticeable.
darkwader18701 said:
im using viper android with razor surround +50 bass convolver, here's the link for the convolver:
https://www106.zippyshare.com/v/bWqN7YT0/file.html
you have to copy this to root/ViPER4Android/Kernel
Gesendet von meinem MI 8 mit Tapatalk
Click to expand...
Click to collapse
Thanks man, now better
M73_ said:
Thanks man, now better
Click to expand...
Click to collapse
you're welcome dude [emoji1]
Gesendet von meinem MI 8 mit Tapatalk
---------- Post added at 10:25 AM ---------- Previous post was at 10:23 AM ----------
edenk said:
Can someone confrim that it really works? I'm interested in buying the phone but the low speaker volume is bothering me.
Thanks!
Click to expand...
Click to collapse
Dude the speaker volume isn't low it's good and loud enough. Our speaker is a mono speaker that means no stereo but you can install dolby surround or viper4android and so on. I hope i could help you a bit.
Gesendet von meinem MI 8 mit Tapatalk
darkwader18701 said:
you're welcome dude [emoji1]
Gesendet von meinem MI 8 mit Tapatalk
---------- Post added at 10:25 AM ---------- Previous post was at 10:23 AM ----------
Dude the speaker volume isn't low it's good and loud enough. Our speaker is a mono speaker that means no stereo but you can install dolby surround or viper4android and so on. I hope i could help you a bit.
Gesendet von meinem MI 8 mit Tapatalk
Click to expand...
Click to collapse
Do you use this version viper4android?
FX version: v2.5.0.5
Related
Hey peeps,
to get some load from the omni development thread I thought i make a q&a thread.
The related development threads can be found here (4.3) and here (4.4).
If you got any questions or feature requests, please place them here.
Documentation
OmniROM general forums are available there (generic feature request,...) - http://forum.xda-developers.com/forumdisplay.php?f=2601
Docs (still WIP) are available there - http://docs.omnirom.org/
Prerequesits
4.4
CWM Touch 6.0.4.4 (if you have a metadata error when flashing, you're using a wrong recovery!)
Knowledge about Android installation
How to flash
If coming from a different rom or different android version
download Rom and place it on your sd
download gapps (4.3 / 4.4) and place it on your sd
reboot to recovery
wipe data/factory reset
flash Rom
flash gapps
reboot and have fun
Updating omni (except from 4.3 to 4.4)
download rom and place it on your sd
reboot ro recovery
if stated wipe data/factory reset
flash rom
reboot and have fun
Known bugs
4.4
Video playback is messy
Camera (pictures) is a bit broken
4.3
FM radio doesn't work by stock (needs external application and hacks)
Compass doesn't work properly
2D acceleration is laggy
Download
4.4
Nightlies
http://dl.omnirom.org/i9300
4.3
"Official" test builds (the "" are, because they aren't build by the official build server)
http://goo.im/devs/Rebellos/i9300/omni
Mirror:
http://d-h.st/C3w
Reporting Bugs
Please keep in mind, omni is still work in progress, so some glitches are expected, if you face any bug, please add a log or at least step by step information to reproduce it and report it at gerrit.omnirom.org (unmerged changes), jira.omnirom.org (merged changes) or at the bug tracker. If you can't provide the needed information to reproduce it or a log, post it here.
Please keep in mind, if you use your own mods, kernel or any other modification which isn't shipped with the rom, try first if it's working without the modifications before reporting or asking about it.
FAQ
4.4
Q: My singal indicator shows only one bar, why so weak?
The signal itself isn't that weak, it's just a graphical glitch showing it as weak.
Q: I got an error within recovery, what to do?
See, prerequesits
Q: My camera doesn't work, how to get it fixed?
At first opening the camera the system will crash, but when it booted up afterwards the camera works.
4.3
Q: Mobile data doesn't work, how to fix it?
Search for the apn settings for your provider and add them manually
Q: Active display kills my battery, what to do?
Active Display uses much juice if the pocket mode is enbaled, because the proximity sensor is used, if it drains too fast, turn pocket mode off and let the notification redisplay instead (half an hour or hour isn't a bad interval and won't use that much juice).
Q: Where to find the Multi-Window feature?
Go to the recent activity list (long press home), long press the activity you like to have in Multi-Window and choose add to splitview from the contextmenu.
Reserved
Can I ask? if I wanna ask? Where do I ask? Ha ha ha
Sorry for the O. T.. Just can't keep it to myself
Gewd work @Tectas :good:
Sent from my GT-I9300 using Tapatalk
We're can I find multi window features? What build is that on. I'm on 20/10 build.
andrewwright said:
We're can I find multi window features? What build is that on. I'm on 20/10 build.
Click to expand...
Click to collapse
All builds, at recents list, longpress the window you like to add to split view.
Gesendet von meinem GT-I9300 mit Tapatalk
Thanks button is not working :thumbdown: thank you for the info :thumbup: also on 20/10 build there is no data. Restore APN not working for data. Calls and Tex's working ok
andrewwright said:
Thanks button is not working :thumbdown: thank you for the info :thumbup: also on 20/10 build there is no data. Restore APN not working for data. Calls and Tex's working ok
Click to expand...
Click to collapse
What you mean by restore, if you talk about restoring with titanium or similar, doesn't work most of the time, just search for them and type them in manually under settings - > more - > mobile networks and it should work fine (at least for everyone else, where mobile data didn't work out of the box it worked).
Gesendet von meinem GT-I9300 mit Tapatalk
Got it. Many thanks :thumbup:
Why there are two dev host mirrors? You're both working on the same?
tapatalked with Galaxy S3
Hey tectas!
Nice Job so far!
Is it possible to ad halo?
Greetz
Fireworkerfp
Gesendet von meinem GT-I9300 mit Tapatalk 2
romskii said:
Why there are two dev host mirrors? You're both working on the same?
tapatalked with Galaxy S3
Click to expand...
Click to collapse
The dev host links are user builds from me and hackworks, both as well so only include source from omni repositories, my last includes more cherry picks, like active display and device settings, hackworks less, but is built more recent.
Fireworkerfp said:
Hey tectas!
Nice Job so far!
Is it possible to ad halo?
Greetz
Fireworkerfp
Gesendet von meinem GT-I9300 mit Tapatalk 2
Click to expand...
Click to collapse
It has been pushed to gerrit and reviewed, but it won't be included (at least not soon), because multi window and halo have a conflict, because of an identical flag.
Gesendet von meinem GT-I9300 mit Tapatalk
Hi Tectas you make a 4.4 build or waiting of the officeal reales
Gesendet von meinem GT-I9300 mit Tapatalk
SweetCupcake said:
Hi Tectas you make a 4.4 build or waiting of the officeal reales
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
Will check it in the evening, did a quick peak yesterday, but came across some errors, today evening I got time to look closer and probably fix them.
Gesendet von meinem GT-I9300 mit Tapatalk
Cool then I wish you much success... :good: :fingers-crossed:
Will that 4.4 build contain fixes from 4.3 builds ?
d1rekt0r said:
Will that 4.4 build contain fixes from 4.3 builds ?
Click to expand...
Click to collapse
Basically yes, but it will also introduce new bugs.
Gesendet von meinem GT-I9300 mit Tapatalk
Tectas said:
Basically yes, but it will also introduce new bugs.
Gesendet von meinem GT-I9300 mit Tapatalk
Click to expand...
Click to collapse
Hmm , I guess that's good, same goes on for the next CM ?
d1rekt0r said:
Hmm , I guess that's good, same goes on for the next CM ?
Click to expand...
Click to collapse
Same goes for every aosp Rom.
Gesendet von meinem GT-I9300 mit Tapatalk
Since Omni is currently mostly an AOSP rom with a few goodies and tweaks, I found the following Xposed mod works perfectly and brings with it a few very nice, yet sorely missed features to this rom. Till these are implemented, we can it them instead
Gravity Box - Screenshot on Power Menu, QuickSettings Tile Management, Navigation Bar Tweaks and a whole bunch of others.
XuiMod - BatteryBar as found on SlimBean
Tinted Status Bar - As the titles says, changes the status bar colour to match the currently running app
I only tested these so far and they work very well and there is no battery drain or perceptible performance decrease.
Hi there,
I have my S4 Rom adapted for the Nexus 5. This, of course, you are allowed to test.
Objective:
The goal is to create a suitable for everyday use Rom, without compromise. The Rom it is created the current AOKP source code. As this source code from me in the near future for other devices (HTC one, Nexus 4, ...) is used, I am creating an app where just upload here the additional functions via OTA.
Rom Features:
AOKP code from 02/02/2014
Myhub Support
Busybox Installer (system / app)
Ex-Themer (system / app)
Gravitybox (system / app)
Kernel Tweaker (system / app)
Notification Toogle (system / app)
Xposed Installer (system / app)
ZIPme (system / app)
ro.sf.lcd_density set to 460 (default 480)
Lockring Icon exchanged
Hacker Kernel for Nexus 5 (Alpha Test)
Rom Control of AOKP team
Fast and Stable
More Follows
First Rom flash:
Your Nexus 5 must be unlocked, rooted and have a custom recovery.
Invites you down the Rom and Gapps.
Boot into recovery and make a backup.
After the backup, please make a Fullwipe!
Flash the Rom and Gapps.
Wipe Dalvik and Wipe Cache.
Reboot.
Update:
Invites you down the Rom and Gapps.
Boot into recovery and make a backup.
Flash the Rom and Gapps.
Wipe Dalvik and Wipe Cache.
Reboot
Tip: The hacker kernel consists of the current Cm kernel code. This is modded by me and somewhat improved. Since this CM code currently gets a few major changes, I recommend you here to the Franco kernel after reflashing!
Disclaimer:
For any damage that may result from flashing the ROM or the kernel is not stuck!
Download:
http://d-h.st/users/thehacker911
Thanks to:
Google
AOKP Team for the Base source
franciscofranco for the best Kernel
rovo89 for Xposed Framework
Maddes1402
mikrosmile
C3C076 for Gravitybox
SArnab©® for Ex-Themer
All Xposed Developers
All Xposed Modul Developers
Themes, Screenshot and Wallpaper:
Find here: https://www.dropbox.com/sh/qini2lau5pjgulk/1m0DxBkRwd
Gesendet von meinem Nexus 5 mit Tapatalk
Meant for me
Gesendet von meinem Nexus 5 mit Tapatalk
Good luck !
Hi,
Just one thing, since you have integrated some Xposed stuff, you should mention that your rom is not compatible with ART runtime.
Something like this, from the Xposed Framework thread:
After installing Xposed, the runtime gets reset from ART to Dalvik. Can you stop it please?
You can be glad that I implemented this, otherwise you would be in a bootloop know. Xposed isn't compatible with ART (yet). It's a completely different architecture with pretty much no documentation. Rewriting Xposed for the ART runtime requires understanding the concept, the code structure and many details to know how it works. I have already spent dozens of hours on that and some things are working. But still it's a long way ahead. Don't expect even a test version in the near future. So please don't ask when it will be available - you will surely know when it is ready. I have nothing else to say about that.
Click to expand...
Click to collapse
Because for sure you'll have some people asking for ART compatibility or why when they switch to ART it remains back to Dalvik, etc...
agrees're right. thank you. I will consider it in the next nightly.
Gesendet von meinem Nexus 5 mit Tapatalk
new nightly is uploading ...
code update
Xposed is not compatible with ART (yet).
Does this ROM have Lockscreen Notifications?
Sent from my Nexus 5 using XDA Premium 4 mobile app
No sorry
Gesendet von meinem Nexus 5 mit Tapatalk
thehacker911 said:
No sorry
Gesendet von meinem Nexus 5 mit Tapatalk
Click to expand...
Click to collapse
Nice dich wieder zu sehen
hello my friend. If you have time, and we need to have a little talk about a recovery in German
Gesendet von meinem Nexus 5 mit Tapatalk
I can't get this ROM to boot, I've tried multiple gapps.
https://www.dropbox.com/s/9fiuucitm7alawm/gapps-kk-20140116-signed.zip
Just try this. Can you give me please upload your Gapps or give the link? So that I can pursue it?
Gesendet von meinem Nexus 5 mit Tapatalk
thehacker911 said:
https://www.dropbox.com/s/9fiuucitm7alawm/gapps-kk-20140116-signed.zip
Just try this. Can you give me please upload your Gapps or give the link? So that I can pursue it?
Gesendet von meinem Nexus 5 mit Tapatalk
Click to expand...
Click to collapse
I think I figured it out, its most likely Multirom related. I'm going to retry it tomorrow with a different kernel. I got another AOKP build that wouldn't boot to work by flashing a different kernel on a clean install.
Let me know if it worked. Thank you
Gesendet von meinem Nexus 5 mit Tapatalk
New Nightly online!
911 is one of the most offensive numbers around today. By this I mean it's use other than to refer to a date in history. It's not hip. To use it as an ID is sick, IMO. No excuses. I'm not being petty. Just showing respect to the dead and relatives of the dead.
#64268gkyJL#8653%dhjGUKVS357.
howard bamber said:
911 is one of the most offensive numbers around today. By this I mean it's use other than to refer to a date in history. It's not hip. To use it as an ID is sick, IMO. No excuses. I'm not being petty. Just showing respect to the dead and relatives of the dead.
#64268gkyJL#8653%dhjGUKVS357.
Click to expand...
Click to collapse
I don't think it's intent that way...
So you're absolutely right. The nickname I had even before the September 11 Furthermore, what is so expressed quite different. In German, it would be 09.11. (DD/MM) Date of Death form my brother.
All thanks to @chirantantab :highfive: now you can have great sound on AOSP and CM based ROMs (without wasting your time on MIUI anymore). He deserves all the credit for this mod, I have just prepared this flashable zip so that installing becomes easy.
As per members of XDA, it is working great on Official CM12.1. I have personally tested it on AICP and SlimLP ROM by bitti09. My Mi3 sounds fabulous now
Just download and flash it using your favorite recovery (I used TWRP). No need to wipe anything after flashing the zip.
I am not providing any uninstaller at the moment and may or may not provide one in future (all depends on my mood).
I really don't think that you would want to go back to those tiny-winy sound after using this mod. But in case you want to just backup the /system/etc/mixer_paths.xml file before flashing this mod.
Enjoy
Disclaimer: 1. If you brick your device while trying to flash this harmless zip then congratulations!!! 2. If you become deaf after using the mod then please don't complain here, nor me or @chirantantab can do anything about it (we can only laugh at you). Please visit any nearby doctor and get your ears checked.
Ha ha Disclaimer: section well said:laugh::laugh:
Does it work on Mi4?
Sent from my MI 4 using Tapatalk
diongdyh said:
Does it work on Mi4?
Sent from my MI 4 using Tapatalk
Click to expand...
Click to collapse
Not sure bro, it might though. Don't have a Mi4 to test.
May be you can test it on Mi4 and let us know
As it is not tested for Mi4, you can just take a backup of the file (mentioned in OP), flash it and test.
Cheers
No difference flashed it on EOS :/
Sent from my MI 3W using Tapatalk
diongdyh said:
Does it work on Mi4?
Sent from my MI 4 using Tapatalk
Click to expand...
Click to collapse
u can send the mixer_path ..... so can compare both files
Cant flash on Cyanogenmod Recovery
Gesendet von meinem MI 4 mit Tapatalk
Will this work with dolby atmos mod?
Howieson29 said:
Cant flash on Cyanogenmod Recovery
Gesendet von meinem MI 4 mit Tapatalk
Click to expand...
Click to collapse
Who the hell uses the rusty recovery? Use TWRP!
Sent from my MI 4 using Tapatalk
diongdyh said:
Who the hell uses the rusty recovery? Use TWRP!
Sent from my MI 4 using Tapatalk
Click to expand...
Click to collapse
The Ota from Cyanogenmod works perfect with this. And no heat Problems and no GPS Problems. Only Think I miss from MIUI is FM Radio
Gesendet von meinem MI 4 mit Tapatalk
chirantantab said:
u can send the mixer_path ..... so can compare both files
Click to expand...
Click to collapse
Here it is.....
https://drive.google.com/file/d/0B9iLbkiyFtrASERfdkppYk1mMFU/view?usp=docslist_api
mdfarazb2 said:
Here it is.....
https://drive.google.com/file/d/0B9iLbkiyFtrASERfdkppYk1mMFU/view?usp=docslist_api
Click to expand...
Click to collapse
0.1% changes in PA Gains
Use the flashable zip or paste the modded file
Howieson29 said:
The Ota from Cyanogenmod works perfect with this. And no heat Problems and no GPS Problems. Only Think I miss from MIUI is FM Radio
Gesendet von meinem MI 4 mit Tapatalk
Click to expand...
Click to collapse
For FM Radio you can use the FM Fix in the General section of Mi3. Just follow the procedure in OP to flash the zip and enjoy FM Radio.
Cheers
chirantantab said:
0.1% changes in PA Gains
Use the flashable zip or paste the modded file
Click to expand...
Click to collapse
Bro, do you want me to create a separate zip for Mi4 using the file you have attached for convenience of others? It will take just few minutes for me.
rajib4 said:
Bro, do you want me to create a separate zip for Mi4 using the file you have attached for convenience of others? It will take just few minutes for me.
Click to expand...
Click to collapse
nope .... there are several mi phones and several HPS .... next day someone asked is it work on mi note/audio technica ,how many u made, ??? u'll be tired :laugh:
This zip is standard one ...just 0.1% change .... It'll be fine
May use the Enhancer zip or paste the mixer_path
Maybe the title is a little misleading, i compare the mod file with the none-moded one, just some volume values are increased, but the sound quality is still worse than miui or ivan's aosp. I'm using CM12.1 Official, notification sound latency or broken still exists.
TevicTT said:
Maybe the title is a little misleading, i compare the mod file with the none-moded one, just some volume values are increased, but the sound quality is still worse than miui or ivan's aosp. I'm using CM12.1 Official, notification sound latency or broken still exists.
Click to expand...
Click to collapse
Check ur Phone speaker/HP ,i think its already damage before,,,,
"just some volume values are increased"---yes! I know properly what to change exactly, ..... thats how proper gain and control works here !!! Changes everything ...ur sound will be dead...
I've 7 mi Phones ...........I tested each one with standard values ............ everything working fine here
Can anyone upload stock mixer of cm 12.1? I feel this mod broke my speaker and Bluetooth. Sound is more distorted and just brakes my speaker....
3n3rg1c said:
Can anyone upload stock mixer of cm 12.1? I feel this mod broke my speaker and Bluetooth. Sound is more distorted and just brakes my speaker....
Click to expand...
Click to collapse
Just dirty flash the ROM what you are using, it will revert the mixer to stock.
rajib4 said:
Just dirty flash the ROM what you are using, it will revert the mixer to stock.
Click to expand...
Click to collapse
Does this mod make the sound like on Ivan's ROM or MIUI?
I'm currently on AOSPA 5.1 by SynnyG
Thanks
Hello,
i have some Problems with Small EUI,
I flashed 7.1 clear and updated to 7.2.
HD Voice call or VoLTE didnt work. LTE work ! B20 (Germany)
When I install Viper4Android Latest then the app doesnt recognize and driver cant be installed.
But when i flash Viper4Atmos the App will work and i can use all functions but phone calls didnt work I cant hear nothing and the other side cant hear me.
Anyone knows what i Can do
Gesendet von meinem Le X820 mit Tapatalk
funboomer2005 said:
Anyone knows what i Can do
Gesendet von meinem Le X820 mit Tapatalk
Click to expand...
Click to collapse
For Viper issue, install Viper4divine from AOKP or RR versions and86rus posted, works fine and calls work too.
Just flash using Magisk 20+ working and tested on android 10 PE rom
DOWNLOAD ---> Android Q stereo mod dipper <--- DOWNLOAD
Stereo Mod Probably working Miui 11 you need follow thread or test by yourself Go to Thread :good:
:angel::angel:
here is Viper4Android and Magisk tutorial for andorid 10
version: v1.0
name: [DIPPER] Stereo Mod
magisk: 20+
Not working on latest P3R Android 10.
However some users report it works for them.
Would logs be useful to troubleshoot the problem?
Tested with P3R and it works like a charm.
Quick question, wont this damaged the earpiece?
Thanks.
desvariando said:
Not working on latest P3R Android 10.
However some users report it works for them.
Would logs be useful to troubleshoot the problem?
Click to expand...
Click to collapse
yes if you can
akupp said:
Tested with P3R and it works like a charm.
Quick question, wont this damaged the earpiece?
Thanks.
Click to expand...
Click to collapse
the sound is properly optimized, so it's good not to use any additional sound enhancers
i tried mod on miui 11/Q and ... speakers on top sounds good but main ... main dont play anythink , i will fix this in next update
mmvxky said:
yes if you can
Click to expand...
Click to collapse
How can I?
I mean, which logs? (to avoid to be too long)
- While using any audio app?
- The boot logs.
- Other?
mmvxky said:
i tried mod on miui 11/Q and ... speakers on top sounds good but main ... main dont play anythink , i will fix this in next update
Click to expand...
Click to collapse
We waiting you bro to fix the issue in miui 11/Q. Thanks for all
More are expected than you think for miui 11 thx
mmvxky said:
just flash using magisk 20+ working and tested on android 10 pe rom
download ---> android q stereo mod dipper <--- download
stereo mod probably working miui 11 you need follow thread or test by yourself go to thread :good:
:angel::angel:
here is viper4android and magisk tutorial for andorid 10
version: v1.0
name: [dipper] stereo mod
magisk: 20+
Click to expand...
Click to collapse
thread update !!!
New update??
Its disturb the front speaker in max volume wen watching youtube.
@mmvxky you are a genius! I'm was dreaming about this mod for month's.
Maybe you can share your viper options also?
IURII G said:
@mmvxky you are a genius! I'm was dreaming about this mod for month's.
Maybe you can share your viper options also?
Click to expand...
Click to collapse
thanks ^^ you wants mod or my audio settings ?
Ι want also your audio settings please
Στάλθηκε από το MI 8 μου χρησιμοποιώντας Tapatalk
Not Working, on Xiaomi EU 9.10.17 magisk 20.0. only sound from the top earspeaker.
mmvxky said:
thanks ^^ you wants mod or my audio settings ?
Click to expand...
Click to collapse
Yes!
Is that real stereo, or just same sound from earpiece?
Hi if any wanna test a work version with the last Xiaomi.EU beta go here:
https://forum.xda-developers.com/showpost.php?p=80657937&postcount=122
galeip said:
Is that real stereo, or just same sound from earpiece?
Click to expand...
Click to collapse
Same. But in result of different upper speaker specs it adds height freqs and capacity.