Related
Hi,
I try to installiert the newest beta, I install cofface twrp and alka twrp. I get an error if I want to install a Miui with one of this Twrp's.
I read much threads Form Here but I cant find any reason for this. I'm now on Cm13.
best regards
Try to format each of your partition like system, data, cache & dalvik/art cache. I do this yesterday and sucsess to flash miui eu rom from cm.
Good luck.
The reason is recent marshmallow roms are encrypted
Unless you patch your boot.img or rollback to android 5.1.1 base again, you cant flash via TWRP
I do that every time when I flash anything with TWRP, which TWRP have you used?
How can I patch the boot.img? If I rollback to global miui, I have to reboot to edl mode via adb and use miflash?
If you are not using Cofface Twrp, then flash patched boot image, i recommend use official TWRP, just flash the recovery rom and then flash "lazyflasher.zip" google it.
I am on latest global with 5.1 base. If I'll flash the beta (6.0.1 base) and then the lazyflasher, I think I would not be encrypted but in a locked bootloader. Am I rt?
Hello Friends,
After a lot of search and read I am confused. What is complete set of steps required to flash MM rom (non Miui)? What precautions I should take since I unlocked unofficially?
My needs for daily driver is
Good battery life
Working GPS
Working Camera
Root (for titanium backup and adblock)
Current status
Unlocked - UNOFFICIALLY
Recover - ALKA
Rom - Miui LP Global stable
Security - Fingerprint + Pin
Steps I have collated so far
* Remove pin and delete fingerprints
* Do I need to do something about encryption ?
* Goto recovery
** Should I flash another recovery ??
** Nandroid backup
** Wipe cache/dalvik/data/system
** Flash
**** CM13 Firmware
**** Rom (Example RR 5.7.4)
**** Kernel (Example Radon)
**** Gapps
** Clear Dalvik
** Reboot
If fingerprint issue
* Goto recovery
** Flash
**** Goodix Fp8 ( First check if Goodix)
**** Kernel
** Wipe Dalvik
** Reboot
Thanks for your inputs on above. Please also suggest MM rom suitable for my needs.
I'd suggedlst you use Cyanogenmod 13 by TheStrix.
All are stable, I haven't encountered any issues.
What you need to do
-Phone's bootloader needs to be unlocked
-Flash CM13 Firmware (if you're coming from MIUI8, no need to flash this)
-Flash CM13 ROM (Snapshot)
-Flash GAPPS
-Flash Radon Kernel latest version. (I recommend you to usre Radon Kernel because the stock kernel has battery reading issues, it decreases by 2%)
exce1ia said:
-Flash CM13 Firmware (if you're coming from MIUI8, no need to flash this)
Click to expand...
Click to collapse
Thanks.
* I'm at MIUI 8 but Lollypop .. so if I get you correctly, I need not flash CM13 firmware.
* Another query - is there no extra precaution required for Unofficial unlock and no need to use any other TWRP?
hyperorb said:
Thanks.
* I'm at MIUI 8 but Lollypop .. so if I get you correctly, I need not flash CM13 firmware.
* Another query - is there no extra precaution required for Unofficial unlock and no need to use any other TWRP?
Click to expand...
Click to collapse
I had a problem with unofficially unlocking maybe because the unofficial unlock requires to flash Lollipop Global ROM and I was running MM. What I did is find a way that requires to flash MM Dev ROM to unlock. Maybe you won't have a problem if you're gonna flash it using Dev ROM.
exce1ia said:
I had a problem with unofficially unlocking maybe because the unofficial unlock requires to flash Lollipop Global ROM and I was running MM. What I did is find a way that requires to flash MM Dev ROM to unlock. Maybe you won't have a problem if you're gonna flash it using Dev ROM.
Click to expand...
Click to collapse
I'm not on dev rom but on Global Stable MIUI8 Lollipop
kenzo_global_images_V8.0.6.0.LHOMIDG_20161025.0000_5.1_global_e45dc39209
hyperorb said:
I'm not on dev rom but on Global Stable MIUI8 Lollipop
kenzo_global_images_V8.0.6.0.LHOMIDG_20161025.0000_5.1_global_e45dc39209
Click to expand...
Click to collapse
Try and see if you'll get no problem.
i currently on RR 5.7.4 work smooth and stable thanks to developer
i preffer use zcx recovery, because never tried other haha
but dont forget to mount every single time boot to recovery
1. Full Wipe System, Data, Cache, Dalvik, (Internal Storage (optional))
2. Reboot Recovery
3. Flash 8.1.1 Global Stable Rom Marshmallow Based ( Recovery Rom )
4. let the rom boot first till home screen but dont login miui account
5. Turn off and boot to recovery
6. Do Wipe System, Data, Chache, Dalvik again
7. Reboot to recovery again
8. Flash Rom that you want
9. Flash GAPPS
10. Wipe dalvik chache
11. Done reboot system ( i use fpc but if u have goodix should patch the goodix first)
my device was unlocked officialy
ozan6661 said:
i currently on RR 5.7.4 work smooth and stable thanks to developer
i preffer use zcx recovery, because never tried other haha
but dont forget to mount every single time boot to recovery
1. Full Wipe System, Data, Cache, Dalvik, (Internal Storage (optional))
2. Reboot Recovery
3. Flash 8.1.1 Global Stable Rom Marshmallow Based ( Recovery Rom )
4. let the rom boot first till home screen but dont login miui account
5. Turn off and boot to recovery
6. Do Wipe System, Data, Chache, Dalvik again
7. Reboot to recovery again
8. Flash Rom that you want
9. Flash GAPPS
10. Wipe dalvik chache
11. Done reboot system ( i use fpc but if u have goodix should patch the goodix first)
my device was unlocked officialy
Click to expand...
Click to collapse
Thanks.
I think since mine is unofficial then Step 3 requires removal of emmc_appsboot.mbn before flashing. Also I will need to remove recovery.img from the miui rom to avoid TWRP being overwritten
I get the idea that we need to flash miui mm rom first so that partitions are created. But doesn't that can be taken care by flashing CM13 firmware?
hyperorb said:
Thanks.
I think since mine is unofficial then Step 3 requires removal of emmc_appsboot.mbn before flashing. Also I will need to remove recovery.img from the miui rom to avoid TWRP being overwritten
I get the idea that we need to flash miui mm rom first so that partitions are created. But doesn't that can be taken care by flashing CM13 firmware?
Click to expand...
Click to collapse
did u know how to remove emmc_appsboot or replace that ? is the recovery rom will replace the TWRP if flash the rom recovery ?
yup is better to flash miui mm first and unlocked bootloader, CM13 is to old and didnt get update firmware today, so i didnt flashed CM13 Firmware.
why didnt unlock officialy ?
*sorry my english is not really good*
ozan6661 said:
did u know how to remove emmc_appsboot or replace that ? is the recovery rom will replace the TWRP if flash the rom recovery ?
yup is better to flash miui mm first and unlocked bootloader, CM13 is to old and didnt get update firmware today, so i didnt flashed CM13 Firmware.
why didnt unlock officialy ?
*sorry my english is not really good*
Click to expand...
Click to collapse
For emmc .. there are guides
https://forum.xda-developers.com/re...nlock-twrp-t3494833/post69484805#post69484805
https://forum.xda-developers.com/redmi-note-3/help/confused-how-to-root-rn3-india-sd-650-t3512484
I think recovery rom will update both bootloader and recovery, if those files are not removed
Hi everyone,
a quick question.
I am running a:
RN3 Pro SD Kenzo
8.0.6.0 Global Stable firmware ( Lollipop ), unofficial unlock
ZCX TWRP
... yeah, I am still on Lollipop. Reason is that this firmware, at the time of flashing, proved to be the most stable, so I kept it. It still is the best Xiaomi firmware I tested, out all of them, but now, I would like to test out Lineage OS
What would be the fastest way for me to flash the latest Lineage OS on this phone, while keeping the bootloader unlocked?
Can I just wipe the phone, add Lineage and GApps and flash it through recovery?
make sure you have downloaded latest firmware, LOS rom & gapps....next steps is backup your current rom & go flashing.
twrp > wipe > wipe dalvik, system, data & cache > install latest firmware > install LOS rom > install gapps > reboot > done
here is firmware you have needed
Thank you for taking the time to assist me.
Firmware link is not working, sadly.
... so, basically, if I get this right:
1. boot into my TWRP
2. wipe dalvik/system/data/cache
3. after wiping is done, flash/install the latest CM 14.1 firmware without rebooting, select wipe
4. after firmware finishes flashing/installing, flash/install LOS ( without rebooting ), select wipe
5. after that, flash/install GApps, select wipe
6. reboot, and that's it?
Any special steps I should take to keep my unofficial bootloader unlock, or that does not matter with LOS?
EDITED POST FOR CLARITY AND FUTURE REFERENCE.
Tomo123 said:
Thank you for taking the time to assist me.
Firmware link is not working, sadly.
... so, basically, if I get this right:
1. boot into my TWRP
2. wipe dalvik/system/data/cache
3. after wiping is done, flash/install the latest MIUI firmware without rebooting
4. after MIUI finishes flashing/installing, flash/install LOS ( without rebooting )
5. after that, flash/install GApps
6. reboot, and that's it?
Do I flash latest stable or developer firmware in step 3?
Any special steps I should take to keep my unofficial bootloader unlock, or that does not matter with LOS?
Click to expand...
Click to collapse
sorry...find it here
https://forum.xda-developers.com/redmi-note-3/how-to/cm14-14-1-aosp-n-firmware-kenzo-kate-t3507789
that is right...follow my instructions & no need to worrie about bootloader
Thank you for the link. But, the firmware you provided the link for is only around 46MB. Is that right?
Thank you for the asistance. Everything is flashed, and working.
Additional step I had to do was to flash the camera fix from here:
https://forum.xda-developers.com/re...niversal-camera-binary-patch-kenzo-n-t3572779
... and done.
Now, as for the root access, only option I have available through Developer options is root through ADB. Do I download the root package from here:
https://download.lineageos.org/extras
... or is there another method for RN3Pro SD LineageOS?
Downloaded LOS root package. I am set
Hello. I have an unlocked G8342, and I'm trying installing phh's GSI. But after I flashed the system image, I cannot boot my phone. It just shows "SONY" and then rebooted automatically.
I tried flashing the SW_binaries_for_Xperia_Android_9.0_2.3.2_v5_yoshino.img or SW_binaries_for_Xperia_Android_8.1.6.4_r1_v16_yoshino.img.
Before I unlock my phone, I've upgraded to the official Pie release. But what I'm installing is Oreo. Does this matter? Or what should I do in order to make it work?
Balthild said:
Hello. I have an unlocked G8342, and I'm trying installing phh's GSI. But after I flashed the system image, I cannot boot my phone. It just shows "SONY" and then rebooted automatically.
Before I unlock my phone, I've upgraded to the official Pie release. But what I'm installing is Oreo. Does this matter? Or what should I do in order to make it work?
Click to expand...
Click to collapse
if u dont backup ur TA partition before unlocking your bootloader, camera will not work on oreo gsi roms. I recommend u can try pie gsi roms, but it has worse camera quality and stability issues..
arslancn said:
if u dont backup ur TA partition before unlocking your bootloader, camera will not work on oreo gsi roms. I recommend u can try pie gsi roms, but it has worse camera quality and stability issues..
Click to expand...
Click to collapse
I just cannot even boot the GSI ROM. The camera might have issues, but it's not important right now...
Balthild said:
I just cannot even boot the GSI ROM. The camera might have issues, but it's not important right now...
Click to expand...
Click to collapse
I am having the same issue as you, I can't boot every gsi, even the 9.0 ones
yuezhengbaizhi said:
I am having the same issue as you, I can't boot every gsi, even the 9.0 ones
Click to expand...
Click to collapse
what gsi rom are you trying to flash? Do you have TWRP installed? I have a SOV36 (Japan AU version) and it boots with most of all gsi's. Currently using omni rom.
Here is my steps for flashing.
1. boot into twrp
2. goto wipe and factory reset (don't wipe data, system or cache just factory reset)
3. flash img
3a. optional: goto wipe; repair and resize system (if you want gapps)
4. flash gapps
5. flash magisk if you want root
6. reboot
Hope this helps
sinkoo1979 said:
what gsi rom are you trying to flash? Do you have TWRP installed? I have a SOV36 (Japan AU version) and it boots with most of all gsi's. Currently using omni rom.
Here is my steps for flashing.
1. boot into twrp
2. goto wipe and factory reset (don't wipe data, system or cache just factory reset)
3. flash img
3a. optional: goto wipe; repair and resize system (if you want gapps)
4. flash gapps
5. flash magisk if you want root
6. reboot
Hope this helps
Click to expand...
Click to collapse
I have tried the Phh's latest 9.0 GSI and RR's GSI and ERFAN's Q GSI and the official q GSI from Google.
None of them work, all stuck on the Sony boot logo
yuezhengbaizhi said:
I have tried the Phh's latest 9.0 GSI and RR's GSI and ERFAN's Q GSI and the official q GSI from Google.
None of them work, all stuck on the Sony boot logo
Click to expand...
Click to collapse
latest RR gsi did not work for me either but roms like omni, bootleggers, lineage 16 all booted on my SOV 36
Flash the lastest pie ftf, then follow sinkoo1979, instructions, also be sure you only flash ARM64-A versions.. I know Omni, Bliss and bootleggers work with imo bootleggers was the nicest but the unofficial one here has ceased development.. Use open camera for your pics...
The Roms are a hit or miss...make and keep a twrp backup handy...
Hi !
My Mi note 10 Lite is running on DotOS 5.1.1 (Official) and I want to update to 5.1.3. The updated has been released on the official servers but the internal updater don't work. It says that my phone is incompatible with this version, but on the website, the rom is avaliable.
My question is : Is it possible to flash the rom without losing any data ? If yes, is it "safe" ? Which version should I flash for the update ? The vanilla or Gapple one ?
Thanks !
I think you can dirty flash like it is explained on the rom's thread :
DIRTY FLASH
1. Download the latest dotOS for toco
2. Reboot to Android 11 Vendor TWRP or OrangeFox recovery
3. Flash Rom
4. Wipe Cache & Dalvik Cache
5. Reboot
Backup your data in any case to be safe