This project is now "End-of-Life" (EOL). Thanks to all of you for the kind support...
/* Introduction */
Proudly presenting my work, SmartPack-Kernel for OnePlus 5/5T (cheeseburger/dumpling) running stock (both Stable & Open Beta) Oxygen OS.
Please note: This is a close-to-stock kernel with very few yet useful features developed by various developers within this community (They deserve all the credits, please see the Acknowledgements). If you are looking for a more feature rich kernel with several tweaks and mods and also supports other custom ROMs, you might be disappointed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
/* DISCLAIMER */
Code:
I am not responsible for any damage to your device. Everything you are doing on your device is at your own risk.
My kernels are only tested on OnePlus 5/5T (cheeseburger/dumpling) running the latest Oxygen OS ([B]Stable [/B]& [B]Open Beta[/B]).
Please note that flashing any custom Kernel including mine will void your warranty.
/* Compatibility */
This kernel is only meant to work on stock Oxygen OS (Stable & Open Beta) and nothing else. However, it may work on other OOS based Oreo ROMs as well (Please try at your own risk).
/* How-to-install */
Auto-flash from SmartPack-Kernel Manager or download from my webpage &
i. Go to recovery (TWRP recommend)
ii. Flash Kernel
iii. Reboot and enjoy/* How-to Auto-flash */
YouTube Video
/* Features */
Build from stock Oxygen OS source code
Latest Linux 4.4 subversion's and CAF tags fully merged
Built using latest (GCC 9.x) toolchain
Anykernel base for the best compatibility
Kernel tweaking app recommend: SmartPack-Kernel Manager (please note: official Kernel Adiutor is NOT fully compatible with this kernel)
Wireguard support
CPU Input Boost, Devfreq boost, and Simple_LMK from Sultan's Pixel Kernel
CPU Freq Gov: Blu_active, Alucard, and Impulse
Adreno Boost for msm-adreno-tz (disabled by default)
IO schedulers: Maple, Fiops, Zen, Sio & SIOPlus
Enabled a bunch of advanced TCP congestion algorithms (default: Westwood)
Real-time charging status in SmartPack-Kernel Manager
Boeffla Sound to control Headphone, Earpiece (calls) and Microphone (calls)
Boeffla Generic Wakelock Blocker
USB charging rate bumped up to 900 mA (optional, disabled by default)
LED blink/fade control
Display Back-light (Min & Max) Control
K-Lapse, a kernel level live-display module to control screen color, brightness and more
KCAL v2 advanced color control interface
Vibration Strength Control
SELinux "Enforcing" by default (but can be switched to "Permissive" in SmartPack-Kernel Manager)
FSync on/off support
CRC on/off support (disabled by default)
a lot more, please visit my GitHub page for more details...
/* Downloads */
https://smartpack.github.io/op5t/
/* Special note to ROM developers */
You are allowed to include my kernel in any ROMs. Giving proper credits to the original developers (including me, if you considered me as one among them) are, however, highly appreciated. Feel free to contact me, if you need any assistance from my side.
/* Donations */
If you like to appreciate my work, please consider donating to me (by either via PayPal, or by purchasing the donation app from playstore) as it is helpful to continue my projects more active, although it is not at all necessary.
Telegram Group
/* Acknowledgements */
@Lord Boeffla
@Sultanxda
@eng.stk
@flar2
@franciscofranco
@arter97
@tanish2k09 for K-Lapse, a kernel level live-display module.
@nathanchance
@ZaneZam
@osm0sis for AnyKernel project
@Grarak for Kernel Adiutor.
Feel free to raise your finger towards me, if I missed your name from this list...
XDA:DevDB Information
SmartPack-Kernel, Kernel for the OnePlus 5T
Contributors
sunilpaulmathew
Source Code: https://github.com/SmartPack/
Kernel Special Features:
Version Information
Status: Stable
Created 2018-08-22
Last Updated 2019-10-26
SmartPack-Kernel Manager
/* Introduction */
SmartPack-Kernel Manager is a modified version of official Kernel Adiutor, which is originally developed by Willi Ye aka Grarak. All the credits goes to the original developer.
/* Added features over official KA */
This app is significantly modified to meet the needs of SmartPack-Kernel and contains a bunch of useful features (specifically for this device) over official KA, and are
CPU Input Boost & Devfreq Boost (Sultanxda)
Boeffla Sound
Boeffla Wakelock Blocker Driver
Adreno Boost
K-Lapse support
Real-time Charging Status
LED Blink/Fade support
Display Back-light Control (Min & Max)
SELinux Switch
Auto app-updates (in About page)
SmartPack-Kernel auto-updates (in SmartPack page)
And much more, please check Change-logs for more info…
/* How-to */
Download and manually install the latest version of app from the below link.
/* Download */
! Latest Version ! All Versions !
/* Useful links */
! Home Page ! XDA ! Documentation ! Source code ! Change-logs !
YouTube Video
Change-logs
Oxygen OS (Pie)
Oxygen OS (Oreo)
this kernel support "Fix TTL " function?
Will you update it for the new 5.1.5 that's treble now, so I don't know if your current version would work properly (wifi modules... on it or on the Open beta 14 as it's also a treble version.
Vovalldemar said:
this kernel support "Fix TTL " function?
Click to expand...
Click to collapse
Sorry, I'm really new to oneplus devices and I'm not even aware of the mentioned issue. Can you give me little more details.
bihariel said:
Will you update it for the new 5.1.5 that's treble now, so I don't know if your current version would work properly (wifi modules... on it or on the Open beta 14 as it's also a treble version.
Click to expand...
Click to collapse
Sure. I just saw some updates in the oneplus kernel source regarding the treble support. I'll surely update the kernel once I got the 5.1.5 in my hand. Regarding the open beta, I will try to provide a separate kernel when next open beta available (not the current versions).
Edit: Just received new oos update (5.1.5) and running new Kernel version (beta-v2). Will update after some testing...
SmartPack-Kernel beta-v2 for OOS 5.1.5
Hi all,
A new version of SmartPack-Kernel (beta-v2) to work best with the latest OOS release (5.1.5) is now available.
Please note: This version of the kernel is only for OOS 5.1.5 (due to the implementation of project treble by the OnePlus team)
For detailed change-logs, please visit here.
Download link can be found at the below links as well as in SmartpPack-Kernel Manager. Enjoy...
https://sunilpaulmathew.github.io/op5t/
sunilpaulmathew said:
Hi all,
A new version of SmartPack-Kernel (beta-v2) to work best with the latest OOS release (5.1.5) is now available.
Please note: This version of the kernel is only for OOS 5.1.5 (due to the implementation of project treble by the OnePlus team)
For detailed change-logs, please visit here.
Download link can be found at the below links as well as in SmartpPack-Kernel Manager. Enjoy...
https://sunilpaulmathew.github.io/op5t/
Click to expand...
Click to collapse
Thank you for the update.
Thanks! Will try this soon!
SmartPack-Kernel beta-v3
Hi all,
A new version of SmartPack-Kernel (beta-v3) for stable OOS release (5.1.5) is now available.
Changes:
Update Linux Kernel version to 4.4.153 (credits: nathanchance).
Added Zen, Fiops, SIO & SIOPlus IO schedulers.
Implemented vibration strength control (credits: Lord Boeffla).
Misc changes.For detailed change-logs, please visit here.
Download link can be found at the below link. You may also download and flash the new Kernel version within few clicks from SmartpPack-Kernel Manager as well. Enjoy...
https://sunilpaulmathew.github.io/op5t/
@bihariel @cowboysgz or anyone else, I'l really appreciate you if you guys tested and give feedbacks.
Please note: New Kernel for the latest OOS Open Beta will come soon (hopefully).
SmartPack-Kernel v3-OB
Hi all,
Here is the new kernel (beta-v3-OB) for the latest Open Beta (15)
(OB stands for Open Beta. That means this version is only for the latest (15) Open Beta.)
For detailed change-logs, please visit here.
Download link can be found at the below link. Please note: You can NOT download Open Beta Kernels directly from SmartpPack-Kernel Manager at this moment (please use the weblink instead). Enjoy...
https://sunilpaulmathew.github.io/op5t/
sunilpaulmathew said:
Hi all,
Here is the new kernel (beta-v3-OB) for the latest Open Beta (15)
(OB stands for Open Beta. That means this version is only for the latest (15) Open Beta.)
For detailed change-logs, please visit here.
Download link can be found at the below link. Please note: You can NOT download Open Beta Kernels directly from SmartpPack-Kernel Manager at this moment (please use the weblink instead). Enjoy...
https://sunilpaulmathew.github.io/op5t/
Click to expand...
Click to collapse
Thanks. Was waiting for the beta version.
sunilpaulmathew said:
Hi all,
A new version of SmartPack-Kernel (beta-v3) for stable OOS release (5.1.5) is now available.
Changes:
Update Linux Kernel version to 4.4.153 (credits: nathanchance).
Added Zen, Fiops, SIO & SIOPlus IO schedulers.
Implemented vibration strength control (credits: Lord Boeffla).
Misc changes.For detailed change-logs, please visit here.
Download link can be found at the below link. You may also download and flash the new Kernel version within few clicks from SmartpPack-Kernel Manager as well. Enjoy...
https://sunilpaulmathew.github.io/op5t/
@bihariel @cowboysgz or anyone else, I'l really appreciate you if you guys tested and give feedbacks.
Please note: New Kernel for the latest OOS Open Beta will come soon (hopefully).
Click to expand...
Click to collapse
Thanks for the updates.
Well, everything works as it should, i like all the features included.
only one thing: I feel the UI a bit laggy compared to stock or other kernels like Render. But just a tiny bit.
Also, is there any chance for adding an EAS version like in renderkernel?
JackSparrow17 said:
Thanks. Was waiting for the beta version.
Click to expand...
Click to collapse
Great, will wait for your feedback...
bihariel said:
Thanks for the updates.
Well, everything works as it should, i like all the features included.
only one thing: I feel the UI a bit laggy compared to stock or other kernels like Render. But just a tiny bit.
Also, is there any chance for adding an EAS version like in renderkernel?
Click to expand...
Click to collapse
Hi, Thanks for the feedback and nice to know that you like it. If you use SMartPack-Kernel Manager (my own modified version of KA), you will get an option to select performance profile (default is balanced). It will significantly increase the cpu input boost duration and hopefully remove the lag.
Regarding the EAS, I'm not sure at this moment. I have to check the Render Kernel source to know the possibilities.
SmartPack-Kernel Manager/Looking for a tester...
Hi guys,
I'm looking for a tester (who should be on latest Open Beta) to check a new version of Smartpack-Kernel Manager. Which basically allow you to directly download and flash proper kernels for stable (tested by myself)/Open Beta (need more testing) respectively. If anybody willing, please pm me or contact me on Telegram.
Thanks in advance...
Have a nice day...
SmartPack-Kernel beta-v4/v4-OB
Hi all,
New versions of SmartPack-Kernel for stable OOS 5.1.5 (beta-v4) & latest Open Beta 15 (beta-v4-OB) are now available.
Changes
Update Linux Kernel version to 4.4.154 (credits: @nathanchance).
Switch toolchain into latest (GCC-8.2.1).
Add control over Min Display Backlight (control available in SmartPack-Kernel Manager).
Merged several patches from CAF & Upstream (for cpufreq, iosched etc).
Add OS check to anykernel script so that it won't be installed in non-treble and other un-supported android versions.
Download links (separate builds for Stable & Open Beta) can be found at the below link. You may also specifically download and flash the new Kernel version within few clicks from the SmartpPack-Kernel Manager as well (it will download the correct version depends on your OS, that is stable or Open Beta). Enjoy...
https://sunilpaulmathew.github.io/op5t/
Although I do not flash this kernel,thank u for your active updating.waiting for your stable version
directorli said:
Although I do not flash this kernel,thank u for your active updating.waiting for your stable version
Click to expand...
Click to collapse
Although I haven't add a "stable" tag, it should be stable as that of the stock kernel. So, feel free to try it. It doesn't harm you as long as you have a working backup.
So, the main difference between this and the original kernel?
Inviato dal mio ONEPLUS A5010 utilizzando Tapatalk
dead90 said:
So, the main difference between this and the original kernel?
Inviato dal mio ONEPLUS A5010 utilizzando Tapatalk
Click to expand...
Click to collapse
Everything is listed in the OP in details but copied here for you...
/* Features */
Build from Oxygen OS source code maintained by @nathanchance
Built using latest (GCC 8.2.1) toolchain
Anykernel base for the best compatibility
Kernel tweaking app recommend: SmartPack-Kernel Manager (please note: official Kernel Adiutor is NOT fully compatible with this kernel)
Wireguard support
CPU Input Boost (enabled by default)
CPU Freq Gov: Blu_active and Impulse
Adreno Boost for msm-adreno-tz (disabled by default)
IO schedulers: Maple, SIO, SIOPlus, Fios & Zen
Advanced TCP congestion algorithms (default: Westwood)
Performance Tweaks (Spectrum based) within SmartPack-Kernel Manager (3 different profiles; Balanced, Performance & Battery)
Real-time charging status in SmartPack-Kernel Manager
Boeffla Sound to control Headphone, Earpiece (calls) and Microphone (calls)
Boeffla Generic Wakelock Blocker
USB charging rate bumped up to 900 mA
LED blink/fade control
Display Backlight (Min & Max) Control
KCAL v2 advanced color control interface
Vibration Strength Control
SELinux "Enforcing" by default (but can be switched to "Permissive" in SmartPack-Kernel Manager)
FSync on/off support
CRC on/off support (disabled by default)
a lot more...
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING :
This kernel is for Oneplus 5T (dumpling)
Code:
You will NOT void your warranty after flashing this kernel.
Be sure to make all necessary backups first before processing to installation.
I'am not responsible of any damage caused to your device or data lost after flashing this kernel.
Of course, these are only basic warnings ! but generally you'll not get any problem :)[/COLOR][/FONT]
Some reading..
Welcome to SimpleGX kernel ! a kernel that aims for simplicity, stability, better performance, smoothness and battery life over a pure stock kernel.
This kernel is designed for people who are (like me) bored to flash kernels which integrate tons of unneeded things.
Main goals of it is to stay MUCH closer to stock than every kernels shared here and almost not to be a “custom kernel” on its own. So beware, no exotic stuffs here !
No need for any third app or whatever to control this kernel. Just "flash-n-joy" ! this is how I always liked thing.
Keep in mind that this kernel has been designed for my daily use first.
As always, I'm enjoying sharing my contribution here on XDA for free, which taking me a lot of (my free) time to test before releasing. So, if you can offer me a little beer, it will be really appreciated!
This kernel must be only flashed over an official Oneplus 5T OxygenOS (OOS) ROM !
Feel free to include my kernel to your ROMs / threads but please don't forget to inform/ask first via PM and credit me properly in your original thread. It's always appreciated.
★ WHAT TO EXPECT ★ :
(over a pure stock kernel) :
Slightly better battery life
Slightly better performance
Include only efficient (but definitely not experimental) tweaks
Stay as close as possible from pure stock source
★ FEATURES (up-to-date) ★ :
Base :
Always directly based from latest available "android_kernel_oneplus_msm8998" Android Nougat/Oreo/Pie source from Oneplus5T OxygenOS (for clean work)
Compiled with stock Google (4.9.x / aarch64-linux-android) toolchain (for best stability)
Featuring AnyKernel3 (for all ramdisk compatibility)
Stock Linux
Main :
Kernel logger disabled
Very few fixes/optimizations patches for stock interactive governor
Completely optimized stock 'cfq' I/O scheduler
All TCP congestion control modules activated with Westwood currently as default
mmc/core: disabled CRC check
Disabled CC_OPTIMIZE_FOR_SIZE
tcp_output: set initial TCP window size to 64K
fs: default to noatime
Decrease BCL low battery threshold to 5%
WireGuard support (thanks to @zx2c4)
Xbox controller (and other USB pads) support
Dash Charge support
Removed verify and forced encryption + patched SafetyNet flags to pass CTS
Disabled suspicious OnePlus services and logging
Some miscellaneous tweaks, fixes, patches and security patches
Various tweaks :
Full changes to be discovered directly in my Github source below
Features that will NEVER be included in this kernel :
adding any other governor/IO schedulers than those stock
root/busybox auto-installation
CPU/GPU overclocking/undervolting
KCAL
adreno idler
state_notifier
any upstream of Linux kernel
dual-boot
etc
★ PREREQUISITE ★ :
An unlocked Bootloader
An Android Nougat/Oreo/Pie firmware (based on OxygenOS)
A custom recovery (TWRP recommanded), to flash the kernel
Optional : to control some kernel tweaks, you can install Kernel Adiutor)
★ SOURCE (up-to-date) ★ :
SimpleGX (normal version)
SimpleGX (ALS version)
★ INSTALLATION PROCEDURE ★ :
Backup everything you need (internal & external)
Unlock your bootloader
Flash your favorite TWRP recovery
Reboot to TWRP
Wipe both cache & dalvik partitions
Flash your full usual ROM/firmware (optional if you did not flashed any other custom kernel)
Flash SimpleGX kernel
Flash root (Magisk recommended but should work with SuperSU also)
Reboot and enjoy !
★ Frequently Asked Questions (FAQ) ★ :
How can I update my SimpleGX kernel version ?
- Nougat: Just make a dirty flash over it. If there is a special thing to do, then it will be precised directly into the announce.
- Oreo/Pie: flash kernel and root right after (otherwise your device won't boot).
How can I go back to stock kernel ?
Just flash back your full usual rom/firmware back (flashing stock kernel is not enough since it does not brings stock modules back to the rom/firmware).
Is there a LineageOS (LOS) version of you kernel ?
No, and there won’t be any this time on OP5T.
Is your Oreo/Pie version compatible with custom ROM's (8.1.x) ?
No, only official OOS Oreo/Pie.
My battery is draining like hell, what's wrong ?
As @nathanchance perfectly said for his kernel: "The kernel doesn't drain any battery, use an app like BetterBatteryStats to figure out what app is screwing with your phone".
Also, generally, I remarked that wiping cache+dalvik between updates may drain a lot for the percentage left and the first cycle. Anyway, be sure to make at least two full cycles (from 100% to 0%) before judging battery life for any kernel.
How to recover excellent battery life ?
Check my personal tips HERE.
★ for OnePlus 5T ★
/!\ PLEASE DO NOT MIRROR MY DOWNLOADS /!\
Need supports ? all kind of questions must be posted on this thread directly. Be sure to read at least completely this first post before asking any question.
If you enjoy this kernel, don't forget to rate this thread
stars, and clicking the 'thanks' button (right below). It's always appreciated to keep this thread maintained
LIKE MY WORK ?
OFFER ME A
:good::highfive::good:
CHANGELOG
★ CHANGELOG ★ :
13.08.2019 : v6.4 released.
Synchronize codes for OxygenOS 9.0.8 (Android Pie / 9)
26.07.2019 : v6.3 released.
Synchronize codes for OxygenOS 9.0.7 (Android Pie / 9)
Updated Anykernel3 to latest version
Updated WireGuard to latest version (20190702)
11.06.2019 : v6.2 released.
Synchronize codes for OxygenOS 9.0.6 (Android Pie / 9)
Upgrade from AnyKernel2 to AnyKernel3
Updated WireGuard to latest version (20190601)
22.05.2019 : v6.1 released.
Synchronize codes for OxygenOS 9.0.5 (Android Pie / 9)
Updated Anykernel2 to latest version
Updated WireGuard to latest version (20190406)
(slightly ) updated Google GCC 4.9 toolchain
06.01.2019 : v6.0 released.
Synchronize codes for OxygenOS 9.0.1 (Android Pie / 9)
Updated Google GCC 4.9 toolchain
Updated Anykernel2 to latest version
Updated WireGuard to latest version (20181218)
Reverted to built-in proprietary wifi module instead of opensource OOS drivers (not shared to public for now)
All modules are now internal (instead of external) (smaller kernel size)
Kernel logger is now disabled forever
25.10.2018 : v5.6 released.
Synchronize codes for OxygenOS 5.1.6
Updated WireGuard to latest version (20181018)
Updated Anykernel2 to latest version
Compiled with latest updated Google GCC 4.9 toolchain
23.08.2018 : v5.5 released.
Synchronize codes for OxygenOS 5.1.5
Updated WireGuard to latest version (20180809)
Updated Anykernel2 to latest version
28.07.2018 : v5.4 released.
Synchronize codes for OxygenOS 5.1.4
Updated WireGuard to latest version (20180718)
Updated Anykernel2 to latest version
ak2: add a warning to not forget to flash Magisk right after flashing kernel (in order to boot)
27.05.2018 : v5.3 released.
Synchronize codes for OxygenOS 5.1.2
Updated WireGuard to latest version (20180524)
Updated Anykernel2 to latest version
17.05.2018 : v5.2 released.
WiFi: migrated from OOS proprietary module to OOS opensource
Fixed (again) delayed notifications issue
Updated WireGuard to latest version (20180514)
Updated Anykernel2 to latest version
Compiled with latest updated Google GCC 4.9 toolchain
26.04.2018 : v5.1 released.
Synchronize codes for OxygenOS 5.1.1
Updated WiFi proprietary module from OOS 5.1.1
Updated WireGuard to latest version (20180420)
Important note: due to added wifi proprietary module, it is highly recommanded to be flashed only on OOS 5.1.1 (please do not complain if wifi is not working if you are on any another OOS version from this). It is also recommanded to flash full stock OOS firmware before flashing kernel and finish by Magisk (otherwise you may face infinite boot at oneplus logo).
19.04.2018 : v5.0 released.
Directly based from latest available 5.1.0 Oreo (8.1) OOS kernel source from OnePlus
Updated WiFi proprietary module from OOS 5.1.0
Updated simplegx_defconfig to match latest 5.1.0 OOS needs
Updated WireGuard to latest version (20180413)
Removed fixed notifications delay tips from joshuous (useless on 8.1)
Important note: due to added wifi proprietary module, it is highly recommanded to be flashed only on OOS 5.1.0 (please do not complain if wifi is not working if you are on any another OOS version from this). It is also recommanded to flash full stock OOS firmware before flashing kernel and finish by Magisk (otherwise you may face infinite boot at oneplus logo).
Previous releases changelog...
08.04.2018 : v4.2 (ALS) updated.
Linux-stable updated to 4.4.127
Updated Anykernel2 to latest version
Compiled with latest updated Google GCC 4.9 toolchain
04.03.2018 : v4.2 (ALS) updated.
Linux-stable updated to 4.4.120
02.03.2018 : v4.2 (ALS) released.
Introducing ALS (Android Linux Stable) version (same as original v4.2 with linux-stable merged in) - big thanks to @nathanchance
Linux-stable updated to 4.4.119
28.02.2018 : v4.2 released.
Synchronize codes for OxygenOS 5.0.4
Update WiFi proprietary module from OOS 5.0.4
Updated WireGuard to latest version (20180218)
Updated Anykernel2 to latest version
13.02.2018 : v4.1 released.
Fixed notifications delay (credits @joshuous)
Disabled suspicious OnePlus services and logging (credits @joshuous)
07.02.2018 : v4.0 released.
Directly based from latest available 5.0.3 Oreo OOS kernel source from OnePlus.
Compiled with latest updated Google GCC 4.9 toolchain
Updated Anykernel2 to match latest version available
Exact same features from Nougat version excepted the following:
- Updated WiFi proprietary module from OOS 5.0.3
- Stock Oreo defconfig merged with SimpleGX needs
My github will now feat 2 branchs for both respective Nougat and Oreo versions.
Nougat versions will always now be 3.xx and Oreo 4.xx.
Important note: due to added wifi proprietary module, it is highly recommanded to be flashed only on OOS 5.0.3 (please do not complain if wifi is not working if you are on any another OOS version from this). It is also recommanded to flash full stock OOS firmware before flashing kernel and finish by Magisk (otherwise you may face infinite boot at oneplus logo).
19.01.2018 : v3.2 released.
Fixed a little mistake from myself from v3.1 about trying to update WireGuard (thanks to @nathanchance & @zx2c4 for their precious helps)
Updated Anykernel2 to match latest version available
18.01.2018 : v3.1 released.
Updated WireGuard to match latest version available
Updated Anykernel2 to match latest version available
Update build script
16.01.2018 : v3.0 released.
Updated Anykernel2 to match latest version available
Kernel completely rebuilded from zero (again)
Removed all added arm64, cpuidle, etc commits. This version is now even more close from stock than ever (check github for changes or first post for actual features)
Also removed the following:
- Wakelocks control support
- MAPLE I/O scheduler added (and set as default)
- Very few compilation optimizations
10.01.2018 : v2.4 released.
Added some new arm64 patches
Updated Anykernel2 to match latest version available
04.01.2018 : v2.3 released.
Enable back stock Adaptive LowMemoryKiller
03.01.2018 : v2.2 released.
Add some new optimizations/fixes interesting commits (check github for changes)
01.01.2018 : v2.1 released.
Add WireGuard support
31.12.2017 : v2.0 released.
Kernel completely rebuilded from scratch (cleaner github separate commits also)
Completely thinked and reworked from zero (many commits removed, to keep only efficient ones and be more close to stock than ever)
Add some new optimizations/fixes interesting commits (arm64, cpuidle, etc)
Synchronize codes for OxygenOS 4.7.6
Updated Anykernel2 to match latest version available
Removed franciscofranco wakelocks implementation to move up to Boeffla one (only safe wakelocks are now blocked by default)
Removed old github wifi OP5 OOS implementation to now include stock proprietary OOS OP5T wifi module, and load it correctly
Switch back to stock 'O2' optimizations (instead of 'Ofast')
13.12.2017 : v1.7 released.
Revert "sched: Disable gentle fair sleepers"
DTS: Decrease BCL low battery threshold to 5%
11.12.2017 : v1.6 released.
Makefile: enable 'Ofast' optimizations
sched: Disable gentle fair sleepers
Updated Anykernel2 to match latest version available
Compiled with latest updated Google GCC 4.9 toolchain
08.12.2017 : v1.5 released.
Synchronize codes for OxygenOS 4.7.4
01.12.2017 : v1.4 released.
defconfig: Disable SEEMP support
Revert "Correctly unregister usb_psy"
Revert "kgsl: convert some workqueues to use kthreads"
Revert "kgsl: Increase priority of RT thread"
29.11.2017 : v1.3 released.
Correctly unregister usb_psy
Updated Anykernel2 to match latest version available
Revert "cpufreq: interactive: fix to come out of hysteresis mode"
Remove (broken) USB Fast Charge implenetation, for now
27.11.2017 : v1.2 released.
kgsl: Increase priority of RT thread
kgsl: convert some workqueues to use kthreads
cpufreq: interactive: fix to come out of hysteresis mode (ported from OP5 to OP5T by me)
power: qpnp-fg-gen3: queue work on system_power_efficient_wq (ported from OP5 to OP5T by me)
kernel version: add android codename version (as a future Oreo build will be made, it will be easier to discern kernel versions in infos)
25.11.2017 : v1.1 released.
Fixed brightness problem which wasn't really going to 100% (but was stuck at 30% approx).
Removed backlight dimmer useless option
25.11.2017 : v1.0 released.
Initial release (check actual features)
Thanks & greetings
★ THANKS & GREETINGS ★ :
(by alphabetic order)
Lord Boeffla
osm0sis
. . . and of course to all talented devs credited in my commits!
DONATIONS
★ DONATIONS ★ :
Many thanks @morback :good:
Many thanks Henry P. :good:
Many thanks @marko94 :good:
Many thanks @kgs1992 :good:
Many thanks @MrPepperino :good:
Many thanks @xrelic7 :good:
Many thanks @Robustuck :good:
Thank you to support my work ! :highfive:
RESERVED
Reserved.
Thanks will try it once the phone arrives. Love to see development starting
Thanks for this, I always prefer the near-stock experience with some much-needed tweaks. Flashed it on 4.7.2, boots fine, looks very smooth for now!
Keep up the good work!
Welcome to the party sir..! Look forward to your subtle and simple kernels builds..!
Welcome :highfive: i am happy to say that the most stable kernel was yours (op5) and great battery life thanx
Nice to see a new Kernel.
Thanks for your hard work!
Did you include any additional wake-up gestures?
Bug so far: Wifi disabled
Fixed
Not sure if I'm the only one or not, but it seems that I'm no longer able to adjust the brightness after installing your kernel. Other then that, everything else looks to be running pretty good.
xocomaox said:
Did you include any additional wake-up gestures?
Click to expand...
Click to collapse
Nope, sorry. I would like to stay as stock as possible, I prefer to let this kind of functions to real custom kernels
DocRambone said:
Bug so far: Wifi disabled
Click to expand...
Click to collapse
Strange, no problem of WiFi here, just tried to turn ON and connect to my home wifi and connected with success, internet test = OK :good:
Do you directly comes from another kernel ? (I would say blu_spark since we are only 2 for now on OP5T). I recommand you to revert back to stock kernel before flashing mine, and then re-test.
thephoenixvampire said:
Not sure if I'm the only one or not, but it seems that I'm no longer able to adjust the brightness after installing your kernel. Other then that, everything else looks to be running pretty good.
Click to expand...
Click to collapse
No problem also, just tried to slide from min to max and all is fine (progressive), tried with automatic brightness ON and OFF. Same as above, can you try to flash stock kernel/firmware back and then flash my kernel ? :highfive:
AndroidGX said:
Strange, no problem of WiFi here, just tried to turn ON and connect to my home wifi and connected with success, internet test = OK :good:
Do you directly comes from another kernel ? (I would say blu_spark since we are only 2 for now on OP5T). I recommand you to revert back to stock kernel before flashing mine, and then re-test.
Click to expand...
Click to collapse
Yes, restored stock kernel and installed yours after an reboot fixed the bug
Tried to flash this kernel over oos and freedom room and keep getting error 1. What am I doing wrong?
NickMidd91 said:
Tried to flash this kernel over oos and freedom room and keep getting error 1. What am I doing wrong?
Click to expand...
Click to collapse
Probably a bad download, check MD5 to be sure that it corresponds before flashing :good:
AndroidGX said:
Nope, sorry. I would like to stay as stock as possible, I prefer to let this kind of functions to real custom kernels
Strange, no problem of WiFi here, just tried to turn ON and connect to my home wifi and connected with success, internet test = OK :good:
Do you directly comes from another kernel ? (I would say blu_spark since we are only 2 for now on OP5T). I recommand you to revert back to stock kernel before flashing mine, and then re-test.
No problem also, just tried to slide from min to max and all is fine (progressive), tried with automatic brightness ON and OFF. Same as above, can you try to flash stock kernel/firmware back and then flash my kernel ? :highfive:
Click to expand...
Click to collapse
Your kernel was installed within 20 minutes of pulling my op5t out of the box, unlocking, and installing TWRP. I'll go ahead and do another full wipe/data format, see how that goes.
AndroidGX said:
Probably a bad download, check MD5 to be sure that it corresponds before flashing :good:
Click to expand...
Click to collapse
I tried it twice man and I'm flashing it on twrp like I would have on the op5 but only on the op5t. I even downloaded it twice.
Up and running smoothly. Great work!
Edit: No Wifi issues, but I have noticed that the brightness is the same from 25-100% and does not change.
This project is now "End-of-Life" (EOL). Thanks to all of you for the kind support...
Proudly presenting, Boeffla-Kernel (unofficial) for Lineage OS-15.1/16.
/* Introduction */
This is an unofficial port of the well-known Boeffla-Kernel which is developed by the recognized developer @Lord Boeffla. Since the original developer decided to end his support with Nougat, I decided to port his awesome work to Oreo. With the permission of the original developer, here I'm sharing my builds for anyone interested.
/* Warning */
This kernel is no way supported by Lord Boeffla. Please do not bother him with anything related to this Kernel.
/* DISCLAIMER! */
Code:
I am not responsible for any damage to your device. Everything you are doing on your device is at your own risk.
I only own kltelgt (Korean variant). Hence, kernels under the category 'kltekor' are only tested by myself.
Please note that flashing any custom Kernel including mine will void your warranty.
/* Supported devices */
klte: SM-G900F, SM-G900V, SM-S902L
kltekor: SM-G900K/L/S
kltedv: SM-G900P/I
klteduos: SM-G900FD, SM-G900MD
kltekdi: SCL23
/* Compatibility */
This kernel is only meant to work on Lineage-OS 15.1/16 and nothing else. However, it may work on other LOS 15.1/16 based Oreo/Pie ROMs (Please try at your own risk).
This kernel will NOT work in Samsung Stock and other TW ROMs.
/* How-to-Install */
i. Download Kernel
ii. Go to recovery (TWRP recommend)
iii. Flash Kernel
iv. Reboot and enjoy
/* Features */
Built from Boeffla-Kernel 14.1 source code.
Merged with latest LineageOS 15.1 source code.
Built using Bleeding edge toolchain (GCC 8.2).
Added blu_active CPU governer.
All the standard features of Lineage-OS 14.1 Boeffla-Kernel
Support of anykernel concept - flash stock kernel before flashing Boeffla
Additional governors: zzmoove (Note: not considered stable at the moment, you might face reboots!!!), intelliactive, intellidemand, wheatley, smartmax, slim, intellimm, nightmare, lionheart, pegasusq Zzmoove supporting native hotplugging profiles
Additional schedulers: fiops, bfq, sio, tripndroid, zen
Many Hotplug tweak profiles (Default, Optimized, 1 core max, 2 cores max, 3 cores max, 2 cores min, 3 cores min, 4 cores min, 2 cores exact, 3 cores exact)
Wake up gestures implemented (double-tap-to-wake, swipe to wake) Removed from beta-v4 onwards.
Boeffla-Sound engine (Headphones and speaker volume configurable)
Configurable vnswap
True dynamic FSync (activated if screen on, deactived if screen off), configurable
Touch boost frequency configurable, touch boost switch
CPU Overclocking up to 2.84 GHz
CPU Voltages interface for undervolting/overvolting
GPU idle frequency 27 Mhz added
GPU governor selection support
Show GPU frequency usage per frequency in Boeffla-Config
Color control to adjust RGB color space + inverted mode
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
System Tweaks predefined supported (default is off)
Android logger (logcat) configurable
Kernel logger (dmesg) configurable
Charge rates for AC charger, USB and wireless charging separately configurable (set charge rate to 0 to have stock charge logic back)
Charge information display support via Boeffla-Config V2 app
CIFS support
NFS support (module) Removed from beta-v9 onwards.
NTFS support
XBox support
OTG-Ethernet support
TCP Congestion changed to Westwood
Swap supported (but not recommended, use zRam instead)
init.d support (in /system/etc/init.d - set correct permissions!)
Default entropies increased
Insecure kernel (adb has root privileges)
Automatic EFS backup
Kernel survival mode by Boeffla-Config app to survive CM rom flashes
Full support for mpdecision for best compatibility and smoothness
(Important: use Boeffla-Config to configure min/max CPU frequencies + governors + schedulers only - or explicitely allow other apps/processes to overwrite this in Boeffla-Config settings, but expect weird side effects)
Integrated full busybox 1.23.1 (own compilation)
Auto-Root by kernel possible by request, not recommended for CM however (latest su included)
Kernel initialization log file (with the history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Presets supported in Boeffla-Config by kernel (Extreme power, power, normal, battery friendly and battery saving)
Always using latest Initramfs
Always based on latest Galaxy S5 sm-g900f kernel sources by CM
Kernel runs with SELinux enforcing by default, just as CM12 stock kernel for S5 - but can be configured to work in permissive mode in Boeffla-Config settings
/* Downloads */
https://smartpack.github.io/downloads/
Mirror
/* Special note to ROM developers */
You are allowed to include my kernel in any ROMs. Giving proper credits to the original developers (including me, if you considered me as one among them) are, however, highly appreciated. Feel free to contact me, if you need any assistance from my side.
/* Donations */
For those who wish to donate to the original developer (Lord Boeffla), here I'm copying his own words.
Code:
If you like my work, feel free to donate: [URL="http://www.boeffla.de/index.php/donation"]Donation-Link[/URL]
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
If you like to appreciate my (sunilpaulmathew) work, please consider a donation as it is helpful to continue my projects more active, although it is not at all necessary.
/* Acknowledgements */
@haggertk for LineageOS 15.X for Galaxy S5
@Lord Boeffla for Boeffla-kernel for LOS-14.x
@franciscofranco
@Sultanxda
@arter97
@faux123
@Saber
@nathanchance
@ZaneZam
@osm0sis for AnyKernel project
Many other XDA developers
XDA:DevDB Information
Boeffla-Kernel (unofficial), Kernel for the Samsung Galaxy S5
Contributors
sunilpaulmathew, Lord Boeffla
Source Code: https://github.com/SmartPack
Kernel Special Features:
Version Information
Status: Stable
Created 2018-03-17
Last Updated 2019-01-10
Change-logs
Oreo
Pie
Reserved
So we are in the house
Kernel works fine so far... No probs with undervolting either. But never used this feature for daily use. Because it's not recommended.
Lg msprenger
Yass! Boeffla the legend, the only custom kernel which performance is faster than any other custom kernels and stock kernels combine.
All the best for you @sunilpaulmathew
You`ll wearing great shoes to continue Lord Boeffla`s legacy
Checked first beta ... fine fine
Cool! Let's check it out!
msprenger said:
So we are in the house
Kernel works fine so far... No probs with undervolting either. But never used this feature for daily use. Because it's not recommended.
Lg msprenger
Click to expand...
Click to collapse
Welcome
The_Voice_70 said:
All the best for you @sunilpaulmathew
You`ll wearing great shoes to continue Lord Boeffla`s legacy
Checked first beta ... fine fine
Click to expand...
Click to collapse
Thanks friend....
kvsjxd said:
Cool! Let's check it out!
Click to expand...
Click to collapse
All good?
Hello, my device is kltekor but after I flashed your kernel the second sim signal appears on the status bar, is that a feature or a bug?
Blackburn119 said:
Hello, my device is kltekor but after I flashed your kernel the second sim signal appears on the status bar, is that a feature or a bug?
Click to expand...
Click to collapse
its a bug. unless your device is a dual-sim variant .
KazuDante said:
its a bug. unless your device is a dual-sim variant .
Click to expand...
Click to collapse
I'm sure Kltekor is a Korean device with single sim
Blackburn119 said:
I'm sure Kltekor is a Korean device with single sim
Click to expand...
Click to collapse
so yeah its def a bug and not a feature.
No such issues in my kltekor (SM-G900L):Lineage-OS 15.1 latest build. See screenshot attached. Maybe some other issues on the ROM side?
Blackburn119 said:
I'm sure Kltekor is a Korean device with single sim
Click to expand...
Click to collapse
for @all,
I'm now testing a new version of Kernel, which is built using UBERTC-8.x (latest toolchain). If anyone wants to test for me, plz pm me or contact me at Telegram.
sunilpaulmathew said:
No such issues in my kltekor (SM-G900L):Lineage-OS 15.1 latest build. See screenshot attached. Maybe some other issues on the ROM side?
for @all,
I'm now testing a new version of Kernel, which is built using UBERTC-8.x (latest toolchain). If anyone wants to test for me, plz pm me or contact me at Telegram.
Click to expand...
Click to collapse
what's the difference between ubertc and old boeffla?
sunilpaulmathew said:
Welcome
Thanks friend....
All good?
Click to expand...
Click to collapse
Yeah works fine as expected. Keep up the good work.
sunilpaulmathew said:
No such issues in my kltekor (SM-G900L):Lineage-OS 15.1 latest build. See screenshot attached. Maybe some other issues on the ROM side?
for @all,
I'm now testing a new version of Kernel, which is built using UBERTC-8.x (latest toolchain). If anyone wants to test for me, plz pm me or contact me at Telegram.
Click to expand...
Click to collapse
Runs well, undervolting works in this kernel now, thank you! Havent noticed anything else thus far exept undervolt is working which is really nice!
Edit: Seems like GPU underclock (27mhz) is also added, great job, thanks!
Boeffla-Kernel (unofficial) v2
New kernel version (v2), which is built using UBERTC-8.x (latest) toolchain, is now available to download.
Detailed change-logs are always available here.
Download links can be found here.
Enjoy...
Thank you very much for the New build.. Works perfectly with the boeffla App. The change to the New Toolchain goes without any probs
No malfunctions since Installation
Great job
Lg msprenger
Sorry friends, I made some accidental mistakes while preparing the last build and it makes the modules unaccessible (do anyone noticed?). The download links are now updated with proper builds. If you are not worried about modules, just avoid this message. Otherwise, update to the newly uploaded builds (Please note: there is absolutely no change in the file name).
Sorry for the inconvenience...
Downloads
https://sunilpaulmathew.github.io/downloads/
Did not notice any inaccassebility to any Module. Which Mods do you mean??
KERNEL❯ LLVM 7 ❯ TREBLE ❯❯ AceKernel • v2.01 • Sept 15
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS KERNEL IS FORTREBLE & NO-TREBLE
Introduction
Hello everyone, I'm Martin and I've been working on Potter for 1 year right now.
I'm constantly trying to improve this device with some change that some developers don't like.
For me EAS is the future of android kernel, that's why I'm already bringing it to you!
I will always follow these three rules:
Follow upstream Linux always
Features will be added only as needed
Security and stability are paramount
I hope you'll all agree with these three rules
Thread Rules
I refuse to acknowledge/respond to bug reports that do not include clear steps to reproduce, a logcat or a dmesg. (Follow this guide)
Stay classy, I won't tolerate flaming of any kind, ever.
OT is allowed.
Features
Here are the major features of the kernel (feel free to explore Github)
Up to date with the latest stable Linux version (3.18.119)
Patches from Code Aurora Forum targeting GPU, touchscreen/video, storage, and sound
Mainline Linux patches for CFQ and media memory allocation
F2FS driver updated
VDSO32 built in
Latest energy aware scheduling patches ported to 3.18 (check EAS)
Converted some workqueues to use power efficient workqueues
Wake up improvements and other optimization from Sultanxda
Rewrited the fingerprint sensor driver (fpc1020_tee)
The following user features:
Faux Sound Control with high-performance audio
Westwood (default)
Maple I/O scheduler
Wakelock control
Lastest WireGuard snapshot
Build with official Clang toolchains 7.0 (clang-4679922).
Hides bootloader unlock from SafetyNet (can still fail through other means)
Flashed with AnyKernel2 (thanks to @osm0sis)
Downloads
Lastest version is the v2.01 (AceKernel-Potter-v2.01_eas_unified.zip)
Eas-Unifiedhttps://download.martichou.me/Potter/
Only small issue is fingerprint gestures broken on Treble rom with this version. I'm working on how to solve this issue.
Old versions: https://download.martichou.me/Potter/Old/
Do not mirror my kernels and don't share the direct link!
Installation
If you are on a custom ROM:
Either dirty flash your ROM or flash the stock boot image. (not mandatory)
Install or temporarily boot into TWRP (follow their instructions)
Reboot to TWRP
Flash the zip.
Reboot and profit!
If you are on a GSI/Treble ROM:
Either dirty flash your GSI image or flash the stock boot image. (not mandatory)
Install or temporarily boot into TWRP (follow their instructions)
Reboot to TWRP
Flash the zip.
Reboot and profit!
Upgrading from one Flash version to the other:
Boot into TWRP
Flash the zip.
Reboot and profit!
Changelog
Complet changelog here:
https://github.com/Martichou/potter/
Thanks to:
@vache for his incredible work on Potter
@joshuous for his work on EAS
@osm0sis for AnyKernel2
The various other developers for their patches (@flar2, @franciscofranco, @frap129, @nathanchance, ..)
All of you guys for viewing the thread
DONATION:
If you want to buy me a beer :good:
Yeah, I'm Belgian, and I love that! http://paypal.me/martichou
TELEGRAM:
There is also an Official Telegram group, for support and to speak directly with me.
https://t.me/joinchat/EWMwLkNn0rKRA-jPluo85w
Website
I've made my personal website. (Hosted at OVH, should be fast for everyone)
It means, I'm gonna upload all zip on it and it also mean that you can take a look at the website
Website: https://martichou.me
DISCLAIMER:
I openly welcome off topic in my threads. Mods, please do not clean off-topic discussion and users, do not complain about off-topic discussion here. I may direct you to another thread if it is so suited but I won't have the discussion cleaned. Thank you.
XDA:DevDB Information
AceKernel, Kernel for the Moto G5 Plus
Contributors
Martichou
Source Code: https://github.com/Martichou/potter
Kernel Special Features:
Version Information
Status: Stable
Created 2018-06-08
Last Updated 2018-09-15
Reserved
Thank you señor
Best kernel overall! (for me). Thanks Martichou!
which non treble rom can I use??
https://potterroms.me/du-mod/
can I use this??
I tried it on cr-droid 01/06, camera stops, so which roms have the latest commits??
Can u please suggest one? Or is it in development??
rishivg said:
which non treble rom can I use??
https://potterroms.me/du-mod/
can I use this??
I tried it on cr-droid 01/06, camera stops, so which roms have the latest commits??
Can u please suggest one? Or is it in development??
Click to expand...
Click to collapse
Basically, all ROM built after the 7th June.
Check on potterroms which were built after this date.
I can't say at 100% that all ROM built after the 7 June is compatible cause it's up to the ROM maintainer to either update his tree or not. So it's better to ask directly to the one who maintains the ROM you gonna use.
Martichou said:
Basically, all ROM built after the 7th June.
Check on potterroms which were built after this date.
I can't say at 100% that all ROM built after the 7 June is compatible cause it's up to the ROM maintainer to either update his tree or not. So it's better to ask directly to the one who maintains the ROM you gonna use.
Click to expand...
Click to collapse
Tried all of them after 7th June... none of them supported this...
rishivg said:
Tried all of them after 7th June... none of them supported this...
Click to expand...
Click to collapse
Try the 8 June Pixelexperience build.
There is also the lastest LOS15.1 from Vache.
As I said, maintainer will have to update their own tree.
Basically it's just a 2-3 days gaps.
As of now, supported roms are PE, LOS, and Firehound
This Kernel works great. The UI runs smooth and my batteries life got up to ~15%.
I want to change the GPU Governor, because I do not need the performance from msm_adreno_tz. This info about adreno I was able to find on xda, but for the other GPU Governors in this kernel I couldn't. Can somebody recommend a GPU Governor for batterie life or balance?
Also, what are the effects of "audio high performance mode"?
ichmyselfandi said:
This Kernel works great. The UI runs smooth and my batteries life got up to ~15%.
I want to change the GPU Governor, because I do not need the performance from msm_adreno_tz. This info about adreno I was able to find on xda, but for the other GPU Governors in this kernel I couldn't. Can somebody recommend a GPU Governor for batterie life or balance?
Also, what are the effects of "audio high performance mode"?
Click to expand...
Click to collapse
I don't recommend you to change the GPU governor. GPU don't take that much battery, and adreno_tz is already pretty great.
On GPU side, you can however change the GPU initial frequency to 133MHz if you want.
If you really want to change GPU governor (even if I don't recommend that at all), you can use simple_ondemand.
And about the Audio High performance mode:
Every phone powered by a Qualcomm processor has a built-in WCD9xx Audio DAC,
but it's rarely configured to be used to its full potential by OEMs.
This might not seem like a problem to some people, but if you're a music lover,
or you simply enjoy high-quality sound, it's an issue you'll definitely want to fix.
By enabling High-Performance Mode, the audio quality of Qualcomm-powered devices
will not only receive a boost in volume but will sound more clear and crisp as well.
- from android.gadgethacks.com
Click to expand...
Click to collapse
Is this kernel compatible with LiquidRemix?
jesus693 said:
Is this kernel compatible with LiquidRemix?
Click to expand...
Click to collapse
If the rom has been merged with june updates, then yes. Otherwise camera won't work.
.... i feel like people are going to yell at me but what is treble? i thought it was all about that bass
Ae3NerdGod said:
.... i feel like people are going to yell at me but what is treble? i thought it was all about that bass
Click to expand...
Click to collapse
No worries. Treble is an initiative by Google that forces OEMs to separate their devices' driver code from the code that powers Android itself. There's a more detailed Android Authority piece that explains it in detail here.
Martichou said:
THIS KERNEL IS FORTREBLE & NO-TREBLE
Introduction
Hello everyone, I'm Martin and I've been working on Potter for 1 year right now.
I'm constantly trying to improve this device with some change that some developers don't like.
For me EAS is the future of android kernel, that's why I'm already bringing it to you!
I will always follow these three rules:
Follow upstream Linux always
Features will be added only as needed
Security and stability are paramount
I hope you'll all agree with these three rules
Thread Rules
I refuse to acknowledge/respond to bug reports that do not include clear steps to reproduce, a logcat or a dmesg. (Follow this guide)
Stay classy, I won't tolerate flaming of any kind, ever.
OT is allowed.
Features
Here are the major features of the kernel (feel free to explore Github)
Up to date with the latest stable Linux version (3.18.112)
Patches from Code Aurora Forum targeting GPU, touchscreen/video, storage, and sound
Mainline Linux patches for CFQ and media memory allocation
Latest energy aware scheduling patches ported to 3.18 (check EAS)
Converted some workqueues to use power efficient workqueues
Wake up improvements and other optimization from Sultanxda
Rewrited the fingerprint sensor driver (fpc1020_tee)
The following user features:
Faux Sound Control with high-performance audio
Westwood (default)
Maple I/O scheduler
Wakelock control
Lastest WireGuard snapshot
Build with official Clang toolchains 7.0 (clang-4679922).
Hides bootloader unlock from SafetyNet (can still fail through other means)
Flashed with AnyKernel2 (thanks to @osm0sis)
Downloads
Treble : AceKernel-Potter-v1.10_eas_treble
No-Treble : AceKernel-Potter-v1.10_eas_no-treble
For no-treble, the ROM need to be updated with lastest blobs from boulzordev GitHub organization.
Do not mirror my kernels and don't share the direct link!
Installation
If you are on a custom ROM:
Either dirty flash your ROM or flash the stock boot image. (not mandatory)
Install or temporarily boot into TWRP (follow their instructions)
Reboot to TWRP
Flash the zip.
Reboot and profit!
If you are on a GSI/Treble ROM:
Either dirty flash your GSI image or flash the stock boot image. (not mandatory)
Install or temporarily boot into TWRP (follow their instructions)
Reboot to TWRP
Flash the zip.
Reboot and profit!
Upgrading from one Flash version to the other:
Boot into TWRP
Flash the zip.
Reboot and profit!
Changelog
Complet changelog here:
For TREBLE variant use the eas_treble branch.
For NO-TREBLE variant, use the eas_no-treble branch.
https://github.com/Martichou/potter/commits/eas_treble
Thanks to:
@vache for his incredible work on Potter
@joshuous for his work on EAS
@osm0sis for AnyKernel2
The various other developers for their patches (@flar2, @franciscofranco, @frap129, @nathanchance, ..)
All of you guys for viewing the thread
DONATION:
If you want to buy me a beer :good:
Yeah, I'm Belgian, and I love that! http://paypal.me/martichou
TELEGRAM:
There is also an Official Telegram group, for support and to speak directly with me.
https://t.me/joinchat/EWMwLkNn0rKRA-jPluo85w
FOR DEVELOPER:
If you want to inline this kernel into your rom, you'll need a change in init.qcom.rc.
I also made this commit to make your life easier. Feel free to pick it [Treble & No-treble branch (depends on what you're building)]
https://github.com/Martichou/android_device_motorola_potter/commit/654854f3bc695a7cfbcc5ff11d7d3943b67869af
DISCLAIMER:
I openly welcome off topic in my threads. Mods, please do not clean off-topic discussion and users, do not complain about off-topic discussion here. I may direct you to another thread if it is so suited but I won't have the discussion cleaned. Thank you.
XDA:DevDB Information
AceKernel, Kernel for the Moto G5 Plus
Contributors
Martichou
Source Code: https://github.com/Martichou/potter
Kernel Special Features:
Version Information
Status: Stable
Created 2018-06-08
Last Updated 2018-06-11
Click to expand...
Click to collapse
Great kernel ??? thank you
monster1612 said:
No worries. Treble is an initiative by Google that forces OEMs to separate their devices' driver code from the code that powers Android itself. There's a more detailed Android Authority piece that explains it in detail here.
Click to expand...
Click to collapse
That is brilliant.
Does this mean our phones compass works on Oreo now? I read somewhere it was because of an issue with not having the 64bit drivers for it. Makes gps apps unusable for me and is basically while I'm still on nougat
hello I want to install the ROM but there is 2 treble version and no treble and I do not know which one to install. I have the latest version of RR-O-v6.0-20180608-potter-official
I already installed it I tried with the non-treble everything works fine even the camera, I'm realizing that I do not have much RAM available less than 400mb in the stock ROM of RR I had always more than 600 now the games are closed only after 5 minutes of opening them by little ram: '(
jesus693 said:
I already installed it I tried with the non-treble everything works fine even the camera, I'm realizing that I do not have much RAM available less than 400mb in the stock ROM of RR I had always more than 600 now the games are closed only after 5 minutes of opening them by little ram: '(
Click to expand...
Click to collapse
You can enable Zram in Kernel Auditor or Exkm or any kernel tweakers.
Enabling Zram should fix your issue.
By the way, I want to say that free ram is wasted ram. The ram need to be full the most of the time. (As far as I know and what others dev said).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
Oxygen Kernel is based on stock Samsung source code taken from Samsung Opensource Release Center with sole aim to provide better performance, stablity and battery backup than stock kernel. A kernel tells the hardware in your Android device how to behave, kind of like your mommy tells you how to behave. You can modify how fast your processor runs by over or under clocking it or optimize your system for battery life.
Oxygen Kernel is always up-to-date with latest patches from kernel.org
Known for maximum stability and smooth performance
All the Source Code is available on github
Kernel Info
LINUX: 3.18.131
SAFETYNET: Green
SELINUX: Permissive
TOOLCHAIN: Google's GCC 4.9
Compatible ROMS
All Touchwiz 8.0+ ROMs
Features
Here are the major features of the kernel (feel free to explore Github)
Up to date with the latest stable Linux version
Full -Ofast build with graphite optimisations
Removed a lot of useless debug and logging options
Disabled TIMA, KNOX, DM-VERITY,etc
Awesome battery life and smooth performance
ARM enhanced performance patches
Overclock CPU up-to 1.7GHz and GPU up-to 1146MHz
GPU Voltage Control
CPU Governors: conservative, interactive, ondemand, performance, powersave, userspace (default: interactive)
I/O Schedulers: bfq, cfq, deadline, maple, noop (default: maple)
Powersuspend and State Notifier drivers
Dynamic FSync, FS fsync toggle on/off
Frandom driver for 10-50x faster random number generation
Spectrum Support (a simple, profile based kernel manager || now integrated into Oxygen Control)
Disabled CRCs by default for 30% performance boost
CDROM emulation on mass_storage (compatible with DriveDroid)
Wireguard support
Boeffla Wakelock Blocker
Oxygen Control App Features
Full CPU and GPU Control
Boeffla Wakelock Blocker
Spectrum Support
Samsung Hotplug
CRC Control
And many more!
These features are only available through Oxygen Control App
Download Oxygen Control from Github Releases
Warning: If you come from some other custom kernel or have any issues, you should dirty flash your ROM before flashing Oxygen Kernel to avoid problems.
Reflash ROM -> Flash Oxygen Kernel --> Flash Magisk if you want to root
If you are upgrading between Oxygen Kernel versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
Going back to stock: You can backup your boot.img with TWRP before flashing Oxygen Kernel and restore the backup whenever you want to revert.
This kernel removes forced encryption, if you face "encryption process failed" error upon reboot then you need to format /data. This is generally needed if you are installing this kernel on stock tw rom
Downloads
Kernel
Download
Oxygen Control
Download
Telegram Group
Join Oxygen Kernel Community group on Telegram here
Join Oxygen Kernel Channel on Telegram here
If you like my work donations are always welcome
Google Pay UPI ID: [email protected]
Paypal: https://paypal.me/SiddhantNaik
Don't forget to hit the thanks button, it's free.
Credits
Samsung Open Source Center for the Source code
@SolarX_dev for numerous help and support
@osm0sis for AnyKernel2
@jesec for Fingerprint Fix
@morogoku for MTweaks
Everyone others from whom i have picked commits (credited on Github)
All those who test my builds before release
XDA:DevDB Information
Oxygen Kernel A6, Kernel for the Samsung Galaxy A6
Contributors
DarkLord1731
Source Code: https://github.com/DarkLord1731/a6lte
Kernel Special Features:
Version Information
Status: No Longer Updated
Current Stable Version: 1.0.131
Stable Release Date: 2019-01-13
Created 2019-01-13
Last Updated 2019-08-11
Changelogs:
Oxygen Kernel v1.0.131
Initial Build
Reserved
Nice Buddy
Can I use it on Samsung Galaxy A6 plus?
francuz1988 said:
Can I use it on Samsung Galaxy A6 plus?
Click to expand...
Click to collapse
No only exynos7870 based A6 models are supported
DarkLord1731 said:
Introduction
Oxygen Kernel is based on stock Samsung source code taken from Samsung Opensource Release Center with sole aim to provide better performance, stablity and battery backup than stock kernel. A kernel tells the hardware in your Android device how to behave, kind of like your mommy tells you how to behave. You can modify how fast your processor runs by over or under clocking it or optimize your system for battery life.
Oxygen Kernel is always up-to-date with latest patches from kernel.org
All the Source Code is available on github
Kernel Info
LINUX:3.18.131
SELINUXermissive
All Touchwiz 8.0+ ROMs
Features
Here are the major features of the kernel (feel free to explore Github)
Up to date with the latest stable Linux version
Removed a lot of useless debug and logging options
Awesome battery life and smooth performance
Overclock CPU up-to 1.7GHz and GPU up-to 1146MHz
CPU Governors: conservative, interactive, ondemand, performance, powersave, userspace (default: interactive)
Powersuspend and State Notifier drivers
Frandom driver for 10-50x faster random number generation
Disabled CRCs by default for 30% performance boost
Wireguard support
Full CPU and GPU Control
Spectrum Support
CRC Control
And many more!
These features are only available through Oxygen Control App
Download Oxygen Control fromGithub Releases
Warning: If you come from some other custom kernel or have any issues, you should dirty flash your ROM before flashing Oxygen Kernel to avoid problems.
Reflash ROM -> Flash Oxygen Kernel --> Flash Magisk if you want to root
If you are upgrading between Oxygen Kernel versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
Going back to stock: You can backup your boot.img with TWRP before flashing Oxygen Kernel and restore the backup whenever you want to revert.
This kernel removes forced encryption, if you face "encryption process failed" error upon reboot then you need to format /data. This is generally needed if you are installing this kernel on stock tw rom
Downloads
Kernel
Download
Oxygen Control
Download
Telegram Group
Join Oxygen Kernel Community group on Telegram here
Join Oxygen Kernel Channel on Telegram here
If you like my work donations are always welcome
Google Pay UPI ID: [email protected]
Paypal:https://paypal.me/SiddhantNaik
Don't forget to hit the thanks button, it's free.
Credits
Samsung Open Source Center for the Source code
@osm0sis for AnyKernel2
@morogoku for MTweaks
All those who test my builds before release
XDA:DevDB Information
Oxygen Kernel A6, Kernel for the Samsung Galaxy A6
Contributors
DarkLord1731
Source Code:https://github.com/DarkLord1731/a6lte
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0.131
Stable Release Date: 2019-01-13
Created 2019-01-13
Last Updated 2019-01-13
Click to expand...
Click to collapse
good job:good:
Thamk you for this sir! ? From my J7 Prime to my A6 ?????
Has anyone tried this already? I would love to try this but my RMM is still prenormal though. I need feedback from other users too. ?
Hi, this can work on a Sm-A605gn? Im lookong something for having SeLinux Permissive, and also, something to compile a Kernel that supports HiD Interface for using Kali. But this kernel's things its always a mess when you try Kali on a Samsung
Shonenbeat said:
Hi, this can work on a Sm-A605gn? Im lookong something for having SeLinux Permissive, and also, something to compile a Kernel that supports HiD Interface for using Kali. But this kernel's things its always a mess when you try Kali on a Samsung
Click to expand...
Click to collapse
This kernel is only for A6 (exynos7870)
Rom for Galaxy A6
Do you have a Rom I can use with the Kernel you created? I've been having trouble finding a capatible Rom for my GALAXY A600
Download zip
Hello,
Excuse me, i don't understand how to download the zip of the kernel
Somebody can tell me how to do?
Thanks
Did someone try this already?
BiHanCummings said:
Do you have a Rom I can use with the Kernel you created? I've been having trouble finding a capatible Rom for my GALAXY A600
Click to expand...
Click to collapse
It should work on any TW oreo ROMs.
marcdu30 said:
Hello,
Excuse me, i don't understand how to download the zip of the kernel
Somebody can tell me how to do?
Thanks
Click to expand...
Click to collapse
Open the download link, select TW or AOSP builds, select the latest version and download. (If downloading from mobile phone u need to click on "download anyways" option when sohrceforge page says "Software downloads are incompatible on this device"
:good:
Hello, I would like to get Ethernet support of the phone. Is it supported on your ROM ?
---------- Post added at 07:59 AM ---------- Previous post was at 07:44 AM ----------
I have another question for you. I'm looking for a ROM that will support voice call over ethernet. In short, VoWi-Fi and VoLTE are IPSEC tunnels to the provider. It should work on Ethernet but all dialer are checking first if Wi-Fi or LTE is enabled before making the call. What I don't know: Is it simply related to the dialer (calling app) replacement or to the ROM itself.
Thank you for helping.
Any plans to do a kernel with Pie (9.0) support?
henok.gk said:
Any plans to do a kernel with Pie (9.0) support?
Click to expand...
Click to collapse
Yes once Samsung releases the updated pie kernel source
Shonenbeat said:
Hi, this can work on a Sm-A605gn? Im lookong something for having SeLinux Permissive, and also, something to compile a Kernel that supports HiD Interface for using Kali. But this kernel's things its always a mess when you try Kali on a Samsung
Click to expand...
Click to collapse
I have a Selinux Permissive for SM-A605G but I am not sure that NFC will work and this kernel work with Pie
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, friend.
Inspired by @wrongway213's original custom kernel for Pixel 4/XL, I decided to make my own project starting with the PIxel 4a 4G, and then wanted to expand the support to the Pixel 4a 5G. The naming is a tribute to both his ideas and Mr. Robot. fsociety tribute's goal is to give the device a set of useful features while ensuring its stability for a daily life usage. Those features and changes are pulled from different places like Sultan kernel, Arter97 kernel, Kirisakura and many more.
Features
General features
Built with Google Clang version 14.0.2 + LLD linker
Full -O3 build with chipset's flags included (thanks to @eng.stk and @Sultanxda)
AnyKernel3 powered installation to stay OTA and flashers (EXKM, FKM...) friendly
ARM64 architecture optimization and performance patches
Merged security and code fixes from Google and Qualcomm - CAF
Filesystem (ext4/f2fs) optimizations
Scheduler code improvements for better CPU tasks assigning
Disabled several debugging cruft
Memory related features
Merge zRAM and zRAM's compression algorithm code updates
Increase zRAM's disksize to 4GB (from the stock 2GB). Apps can be easily memory intensive nowadays...
Swap 1 page at a time instead of the default's 8, so that it may help in case "the device is under extreme memory pressure"
(source: https://source.android.com/devices/tech/perf/low-ram)
Reduce memory and CPU time usage by avoiding dynamic memory allocations in different kernel components (thanks to @arter97 and @Sultanxda)
Network related features
Set BBR as the default TCP network congestion control and switch to fq_codel queue discipline
(this combination improves network speed and reliability - thanks to @kdrag0n)
Enable support for TTL spoofing
Update Wireguard to its latest release
Power-saving related features
Some of the main kernel parts (such as the audio drivers and the WLAN driver's delayed work/tasks) now use power-efficient workqueues (thanks to @Freak07)
Display "power-saving tweaks" merged-in (from Proton kernel)
Reduce the GPU idle timeout set to 64 ms and implement GPU power-saving changes from Sultan kernel
battery: Tweak QG SOC to be more linear/monotonic (from Proton kernel)
That fixes the stock kernel's unlinear battery level curve, especially between 100% and 90%. The device will need a few charge-discharge cycles to take it into consideration
Performance related features
Faster system call filtering using BPF JIT (from Proton kernel)
Implement LRNG and enable it as default for better performance (more info at: https://www.phoronix.com/scan.php?page=news_item&px=LRNG-Random-2021-v41)
fuse: give wakeup hints to scheduler to speed up compress/decompress in internal storage (from Qualcomm,
found in P6's Kirisakura kernel)
Disable the GPU memory usage tracing (which was enabled for debugging purposes)
Return before thermal trip evaluates (it is a workaround for the lag occurring when the device is low on battery and automatically switches to battery saving mode)
Other under the hood changes
Extra features
KCAL Color Control support (from ElementalX/Cleanslate - thanks to @savoca, @tbalden, and @flar2)
Haptic Feedback level Control with Fingerprint Haptic Feedback Control support from blu_spark kernel (thanks to @eng.stk)
Boeffla Wakelock Blocker (to use with caution, and only if it is necessary)
Download & Links
#1.57 ZIP download: https://sourceforge.net/projects/fsociety-tribute/files/pixel4a-5g/fsociety-tribute-stable%231.57.zip/download
Android 12/L Franco Kernel Manager custom json: https://github.com/fsociety-tribute/redbull/raw/a12-rebase/fkm/bramble/fkm.json
Support: Telegram group
Donations: PayPal
Credits go to
LineageOS and GrapheneOS for providing their initial source drops
@wrongway213 for inspiring me to achieve this project and his contributions (especially this thread template)
@eng.stk for blu_spark kernel, for his contributions and his personal pieces of advice
@tbalden for Cleanslate kernel, KCAL support, providing the building script and his contributions
@Freak07 for his guidance in solving my first kernel compiling issues and for his amazing contributions
@kdrag0n for Proton kernel and his innovative contributions
@Sultanxda for Sultan kernel and his outstanding contributions
@arter97 for Arter97 kernel and his efficient contributions
@osm0sis for AnyKernel3 and his contributions
@flar2 for ElementalX, KCAL support and his contributions
@nathanchance for his compilation guides and repos
Thanks to
@Anonshe, @redsmith, @badaas and all my Telegram's group members for being the awesome testers they are
@lacia-chan and @JoshuaDoes for their technical support and the discussions we had together
Every person that submitted a donation, including Shane that gave me his financial contribution which pushed me to work on redbull
XDA:DevDB Information
fsociety tribute for Pixel 4a 5G, Kernel for the Google Pixel 4a 5G
Contributors
momojuro
Source code: Github repository
Kernel Special Features: KCAL, Vibration Control, Wireguard
Version Information
Status: Stable
Current Stable Version: 1.57
Stable Release Date: 2022-06-12
Created 2022-02-22
Last Updated 2022-06-12
Reserved #1
Hey nice kernel! I'm planning on using this in a custom rom(lighthouse sailboat) i plan on building and maintaining for the 4a5G. Is this ready to be built with roms or does it need any modifications? If unsure, i'll just test and see myself.
xxseva44 said:
Hey nice kernel! I'm planning on using this in a custom rom(lighthouse sailboat) i plan on building and maintaining for the 4a5G. Is this ready to be built with roms or does it need any modifications? If unsure, i'll just test and see myself.
Click to expand...
Click to collapse
Hi,
I appreciate your support! It is indeed ready to use, but feel free to contact me if you want to have the build script. I suggest you to fork the repository after the upcoming March build release (as I often force push during my testing phases)!
momojuro said:
Hi,
I appreciate your support! It is indeed ready to use, but feel free to contact me if you want to have the build script. I suggest you to fork the repository after the upcoming March build release (as I often force push during my testing phases)!
Click to expand...
Click to collapse
Ahaha no worries, the rom will be in testing for a while anyways. As for the build script, yea sure send it over!
xxseva44 said:
Ahaha no worries, the rom will be in testing for a while anyways. As for the build script, yea sure send it over!
Click to expand...
Click to collapse
You can contact me on Telegram! (username same as here)
Might be a stupid question, but can this be flashed without rooting?
Edikuun said:
Might be a stupid question, but can this be flashed without rooting?
Click to expand...
Click to collapse
Unfortunately, no.
I also want to mention that the next build is currently being tested on the Telegram group. It shall be released on XDA very soon!
Hello friends,
Here we are for a new update!
The project which started with the Pixel 4a 4G, then extended its support to the Pixel 4a 5G, Pixel 5 and Pixel 5a, has reached 2000+ downloads over 60+ countries, and it is a milestone I wouldn't have reached without your support! Thank you.
You're kindly asked to make sure you're using the stable v24.3 of Magisk before flashing fsociety tribute!
Changelog
fsociety tribute stable#1.43
- Full code rebase for better stability and address the previous reported issues on #1.00
- Android 12L - March 2022 security patch ready (thanks to @lacia-chan for providing the complementary merges)
- Merge the fix for the dirty pipe exploit (more info at: https://dirtypipe.cm4all.com/)
- Reduce the GPU idle timeout from 64ms to 58ms (stock is 80ms)
- Reset zRAM's disksize to stock's default
- Update the compiler from Clang 14.0.1 to Google's latest Clang 14.0.2
- Implement LRNG and enable it as default for better performance (more info at: https://www.phoronix.com/scan.php?page=news_item&px=LRNG-Random-2021-v41)
- Misc. under-the-hood changes
Download & Links
Android 12/L ZIP download: https://sourceforge.net/projects/fsociety-tribute/files/pixel4a-5g/fsociety-tribute-stable%231.43.zip/download
Android 12/L Franco Kernel Manager custom json: https://github.com/fsociety-tribute/redbull/raw/a12-rebase/fkm/bramble/fkm.json
Telegram group: https://t.me/fsociety_tribute_redbull
Donations: https://paypal.me/momojuro
Thank you for making this. Eager to give it a try.
You accidentally posted the 1.43 update file for the pixel 5. We can't flash the update as it says wrong device.
I also manually edited the script to allow it to install on bramble instead of redfin and of course when I booted my device I could not control the touchscreen (aka a pixel 5 kernel installed on pixel 4a 5g).
I checked the files on Sourceforge and I cannot actually locate the real pixel 4a 5g 1.43 update. Those are mislabeled for the wrong device.
I'm surprised no one has said anything since you released this update.....
kratosjohn said:
You accidentally posted the 1.43 update file for the pixel 5. We can't flash the update as it says wrong device.
I also manually edited the script to allow it to install on bramble instead of redfin and of course when I booted my device I could not control the touchscreen (aka a pixel 5 kernel installed on pixel 4a 5g).
I checked the files on Sourceforge and I cannot actually locate the real pixel 4a 5g 1.43 update. Those are mislabeled for the wrong device.
I'm surprised no one has said anything since you released this update.....
Click to expand...
Click to collapse
well someone did mention in the telegram group. But yes, it is as you wrote.
Hello everyone!
I hope you're all doing well. First of all, thank you for your support as always. I would also like to apologize for the sudden communication silence which wasn't planned. Sometimes life gets in the way, and you've got to make choices.
I fortunately found a part-time job and the first weeks were mentally and physically draining. If everything goes well, I will be able to buy a Pixel 5a soon in June, so that I may work again on the redbull/barbet kernel builds while also keeping my 4a 4G as my second device to maintain the original fsociety tribute project!
Excited to come back and exchange with the lots of you, but also address the reported issues.
Hello friends,
Let's finally get back to business! I would like to thank each one of you for your patience, and all my Telegram testers for their feedback and support throughout the past weeks testing phase.
Note: Even though the kernel works with Android 13, I will not provide any support until it is officially released.
Changelog
fsociety tribute stable#1.57
Full code rebase to make the updating process easier and address the reported issues from the previous releases (such as the momentary display rendering lags)
Android 12L - June 2022 security patch ready with Android 13 security and code fixes merged-in
Merged-in Qualcomm's 4.19 repo latest code and scheduler improvements
Updated Wireguard to its latest version's changes
Removed the support of the following features for stability purposes:
Haptic Feedback level Control with Fingerprint Haptic Feedback Control (Vibration control is still supported however)
Boeffla Wakelock Blocker
Download & Links
Android 12/L ZIP download: https://sourceforge.net/projects/fsociety-tribute/files/pixel4a-5g/fsociety-tribute-stable#1.57.zip/download
Android 12/L Franco Kernel Manager custom json: https://github.com/fsociety-tribute/redbull/raw/a12-rebase/fkm/bramble/fkm.json
Telegram group: https://t.me/fsociety_tribute_redbull
Donations: https://paypal.me/momojuro
momojuro said:
Hello friends,
Let's finally get back to business! I would like to thank each one of you for your patience, and all my Telegram testers for their feedback and support throughout the past weeks testing phase.
Note: Even though the kernel works with Android 13, I will not provide any support until it is officially released.
Changelog
fsociety tribute stable#1.57
Full code rebase to make the updating process easier and address the reported issues from the previous releases (such as the momentary display rendering lags)
Android 12L - June 2022 security patch ready with Android 13 security and code fixes merged-in
Merged-in Qualcomm's 4.19 repo latest code and scheduler improvements
Updated Wireguard to its latest version's changes
Removed the support of the following features for stability purposes:
Haptic Feedback level Control with Fingerprint Haptic Feedback Control (Vibration control is still supported however)
Boeffla Wakelock Blocker
Download & Links
Android 12/L ZIP download: https://sourceforge.net/projects/fsociety-tribute/files/pixel4a-5g/fsociety-tribute-stable#1.57.zip/download
Android 12/L Franco Kernel Manager custom json: https://github.com/fsociety-tribute/redbull/raw/a12-rebase/fkm/bramble/fkm.json
Telegram group: https://t.me/fsociety_tribute_redbull
Donations: https://paypal.me/momojuro
Click to expand...
Click to collapse
Thank you Momojuro, happy to have you back, and really appreciate your efforts.
I just flashed this and am excited to see how it works. The stock kernel leaves a lot to be desired.
Hi ! How install it on root devices ? And the adaptative charging work with kernel custom ?
Thanks
Could someone please advise if this Kernel will work with Lineage OS 19.1?
If so, do I need to flash it in Fastboot mode: Fastboot boot 'Kernel Image' or from Recovery > Apply Update > ADB Push.
Thank you!
brickwall99 said:
Could someone please advise if this Kernel will work with Lineage OS 19.1?
If so, do I need to flash it in Fastboot mode: Fastboot boot 'Kernel Image' or from Recovery > Apply Update > ADB Push.
Thank you!
Click to expand...
Click to collapse
Why don't you just ask someone to read the OP to you?
Try starting there before asking questions answered in the OP.