This is clearly @facuarmo source project thanks to him
Work by me
*Fixed not installing issues
*Removed Aroma installer, Shrinked the size of zip file {You can directly install it now}
Works only for Nougat stock and custom ROMS
* Include <std_disclaimer.h> * Your warranty is now void. * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. *
Features:
CPU Overclocked to maximum 1.6 Ghz
GPU Overclocked to maximum 650 Mhz
Moderately undervolted
Updated to Linux 3.10.104
Synced with latest CodeAurora changes
Improved memory management
Improved memory caching backported from Linux 3.15
Improved storage performance
Optimized ARM crypto routines
Updated f2fs and WiFi drivers
FIOPS and BFQ I/O schedulers
Lionfish CPU governor
IntelliPlug CPU hotplug (by faux123)
KCAL MDP5 colour control (by savoca)
Improved zRAM backported from Linux 4.9
Vibration intensity control
Compiled with Linaro GCC 6.2 and optimized for Cortex A53
Stripped down and optimized configuration
Governors: impulse and elementalX, yankactive, zzmoove, darkness and bioshock.
Double tap to wake (DT2W).
Permanently fixed screen flickering: SELinux works fine in permissive or enforcing mode.
Enabled advanced TCP congestion managers: veno, westwood, vegas, illinois, and more.
Drastically improved CPU thermal control: should react approximately from 40°C and end if lower than 35°C are reached. Otherwise it'll keep trying to cool the device, protecting, mainly, the battery.
Automatic thermal throttling and CPU cooling driver added and enabled.
Enabled CPU current throttling driver.
Use the hidden LED as a notification light.
Enabled forced consistency checks for F2FS (/data).
Multi-Cluster Power Management (less CPU battery drain).
KSM (Kernel Samepage Merging).
Advanced Power Management (emulated).
SMT (Simultaneous Multi-Threading).
Fixed temperature handling.
Installation:
Flash it via TWRP clear cache and dalvix cache and you are good to Go.
Bugs:
*Camera doesnt work on this kernel if you're not a selfie expert or a profeesional photographer than this is for you.
Advanced Power Management might let the device reach higher temperatures sometimes.
If you want to thanks for this kernel just go here- https://forum.xda-developers.com/member.php?u=5817781
Download link- https://drive.google.com/file/d/1BFkgQAaJZHMtwQmIxPNVmXEjG2DTArxw/view?usp=drivesdk
Let me know if you have any other issues if you can.
Source
https://github.com/FacuM/android_kernel_motorola_msm8916
I don't know what the heck is this but I hope you enjoy this spaghetti source xD.
facuarmo said:
I don't know what the heck is this but I hope you enjoy this spaghetti source xD.
Click to expand...
Click to collapse
Hey brother why you discontinued your somefeak project, for some annoying reason i didn't find a way to install it but after some work i'd installed it and it was awesome.sorry for my bad english
Waiting for your reply...
No way to fix the câmera?? Its a shame this marvelous kernel have this bug....
Castaldelli said:
No way to fix the câmera?? Its a shame this marvelous kernel have this bug....
Click to expand...
Click to collapse
Yeah that bug is still there and irritates me... But afterall it has many features and governors than any kernels in harpia.
facuarmo said:
I don't know what the heck is this but I hope you enjoy this spaghetti source xD.
Click to expand...
Click to collapse
Otherwise I've installed it then after 1 week of testing I'd uploaded it. Because i thinks that someone found this issue also.
Wiffi not fount in the VIPERos... ROM or the stock fount?
Enviado desde mi Moto G Play mediante Tapatalk
pluma321 said:
Wiffi not fount in the VIPERos... ROM or the stock fount?
Enviado desde mi Moto G Play mediante Tapatalk
Click to expand...
Click to collapse
And stock ROM fort the june, not fount wiffi!!!
Enviado desde mi Moto G Play mediante Tapatalk
pluma321 said:
And stock ROM fort the june, not fount wiffi!!!
Enviado desde mi Moto G Play mediante Tapatalk
Click to expand...
Click to collapse
Bro i dont understand. Please try to speak in english.
Sorry, friend! I wanted to tell you that when installing the kernel in the rom viperos I ran out of wiffi and also in a stock rom
Enviado desde mi Moto G Play mediante Tapatalk
pluma321 said:
Sorry, friend! I wanted to tell you that when installing the kernel in the rom viperos I ran out of wiffi and also in a stock rom
Enviado desde mi Moto G Play mediante Tapatalk
Click to expand...
Click to collapse
Same here..
Other issue: if u enable dt2w at boot with Kernel Adiutor if the screen is off (when the dt2w was enabled by K.A) the screen don't respond anymore when you turn on
srfarias said:
Same here..
Other issue: if u enable dt2w at boot with Kernel Adiutor if the screen is off (when the dt2w was enabled by K.A) the screen don't respond anymore when you turn on
Click to expand...
Click to collapse
yes. I remember that in all the nuclei. The problem is that without wifi, the kernel loses all the benefits....
Enviado desde mi Moto G Play mediante Tapatalk
pluma321 said:
Sorry, friend! I wanted to tell you that when installing the kernel in the rom viperos I ran out of wiffi and also in a stock rom
Enviado desde mi Moto G Play mediante Tapatalk
Click to expand...
Click to collapse
Try to use it on any other Rom, like crdroid,lineage
I am on crdroid and their is no wifi issue.
If you still find the issue, let me know with the logcat.
@AgentVoid
https://forum.xda-developers.com/g4-play/development/kernel-somefeak-reborn-kernel-harpia-t3845362
srfarias said:
@AgentVoid
https://forum.xda-developers.com/g4-play/development/kernel-somefeak-reborn-kernel-harpia-t3845362
Click to expand...
Click to collapse
Which version are you using?
AgentVoid said:
Which version are you using?
Click to expand...
Click to collapse
7.05
the download link isn't working. does anyone have a new download link?
Hi, good night I wanted to make a request to the dev of this kernel, pls fix the camera bug this by far is one of the best kernels or even the best harpia, I need the camera and would like to use it
Related
RADIOACTIVE KERNEL
for CAF Based Roms!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
hi XDA community, i'm here to share with you my little project,i'm a noob just willing to learn all about android world and at this point i'm building from source just using custom toolchains and making few changes like changing optimizations flags,adding or deleting hotplugs and governors ,nothing more till now but i'm enjoying my builds and want to contribute to this community, well let's start.
THIS IS BY NO MEANS COMPLETELY MY WORK,this is 90% @ak kernel source modified to suit my needs
Current Features
General List:
Compiled with Linaro 4.9 Toolchain optimized for cortex-a15
New Synaptic drivers from CM12.1 - per-panel firmware loading
Universal Kernel Control Support (Integrated into Kernel ZIP)
Synapse Enabled
Anykernel Ramdisk Format (Compatible with all ROMS)
Bricked hotplug driver (Enabled by default)
Msm hotplug driver
Zen decision hotplug driver
Voltage Control
Sound Control
Kexec Hardboot - Multirom
Lots of governors and i/o schedulerd
disabled debuging
custom splash image
[ RADIOACTIVE KERNEL INSTALL ]
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip( if you already have a custom kernel is recommended to dirty flash your rom before flash this kernel)
* Reboot
*Install " Synapse " app from Market
CHANGELOG
HERE
DOWNLOADS
HERE
THANKS!!!!
Special thanks to my mentor and friend @moludo for his patience guiding me @ak for his awesome source
Nuclear Team, and all android community
XDA:DevDB Information
RADIOACTIVE_KERNEL_MARSHMALLOW_CAF, Kernel for the OnePlus One
Contributors
acuicultor
Kernel Special Features:
Version Information
Status: Stable
Current Beta Version: V1.34
Beta Release Date: 2015-11-12
Created 2015-11-12
Last Updated 2016-09-26
Tnx mate ?
Amazing Kernel
second? this is the highest up I've ever been on a thread haha
looking forward to trying this out, thanks!
Will test it!
Good work my friend
Overclock?
Added to OnePlus One index thread:
[INDEX] OnePlus One
molonad said:
Overclock?
Click to expand...
Click to collapse
Just Stock frequency table 300/2457
Enviado desde mi A0001 mediante Tapatalk
You managed to install omni rom as secondary on multirom?
acuicultor said:
Just Stock frequency table 300/2457
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
And will you add overclock? Noone maked overclock on marshmallow yet? I asked for this to some devs, noone did it.. It is unpossible or what?
molonad said:
And will you add overclock? Noone maked overclock on marshmallow yet? I asked for this to some devs, noone did it.. It is unpossible or what?
Click to expand...
Click to collapse
Actually with the termal throttling mecanism to oc is useless so no i don't add oc to this kernel unless it lags and need more power thing that its not the case here.
Enviado desde mi A0001 mediante Tapatalk
acuicultor said:
Actually with the termal throttling mecanism to oc is useless so no i don't add oc to this kernel unless it lags and need more power thing that its not the case here.
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
ok so caf roms totally declined overlocking for oneplus ... great.. such a shame i will have to wait for cm rom with boeffla kernel.. these roms as nuclearslim has so big potential, but caf cant beat cm.. if you all dont believe me, i will make video with opening speed with caf and non caf (cm) rom with same kernel settings
molonad said:
ok so caf roms totally declined overlocking for oneplus ... great.. such a shame i will have to wait for cm rom with boeffla kernel.. these roms as nuclearslim has so big potential, but caf cant beat cm.. if you all dont believe me, i will make video with opening speed with caf and non caf (cm) rom with same kernel settings
Click to expand...
Click to collapse
You make your choices and flash what suits your needs that is the beauty of the freedom.
Enviado desde mi A0001 mediante Tapatalk
Try putting 200 min, a lot of people looking for energy saving and it can give a different in your kernel. It's just an idea.
Amazing Kernel mate
Congrats
KenjiHannya said:
Try putting 200 min, a lot of people looking for energy saving and it can give a different in your kernel. It's just an idea.
Amazing Kernel mate
Congrats
Click to expand...
Click to collapse
200 MHz CPU frequency ?
DerRomtester said:
200 MHz CPU frequency ?
Click to expand...
Click to collapse
Yes
KenjiHannya said:
Yes
Click to expand...
Click to collapse
Sry not possible. We can only go down to 268mhz.
DerRomtester said:
Sry not possible. We can only go down to 268mhz.
Click to expand...
Click to collapse
268 is good mate ?
Anyone is trying Zen hotplug? How it works? I've read that it mantain online all 4 cores at dame time... It's good??
Inviato dal mio A0001 utilizzando Tapatalk
cerealguy said:
Anyone is trying Zen hotplug? How it works? I've read that it mantain online all 4 cores at dame time... It's good??
Inviato dal mio A0001 utilizzando Tapatalk
Click to expand...
Click to collapse
from what I have read, it basically determines how many cores should be on based on heat.
RADIOACTIVE KERNEL
for CM13 Based Roms!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
hi,i'm here to present my new little project, this time i go for awesome boeffla-kernel thanks to @lordboeffla for letting me use his sources as base
This is my vision of Boeffla-kernel tweaked in order to gain some cool features and smoothness without loosing stability i hope lol
Current Features
General List:
Same of boeffla kernel except for boeffla sound replaced with Franco sound in order to use other tweaker apps
Compiled with UBERTC 5.3.1
-Ofast optimized
Graphite flags
GPU optimization flags
Disabled lot of debbuging in order to gain speed
Adreno idler
Added some cool governors
Msm mpdecision aka Bricked hotplug (enabled by default)
Zen decision hotplug driver
Alucard hotplug driver ( disabled temporally)
NOTE: ZZmoove native hotplug can be used with ZZmoove governor selected as governor and changing the tunable (disable_hotplug to 0) or via terminal using (stop/start mpdecision to activate or desactivate)
[ RADIOACTIVE KERNEL INSTALL ]
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip( if you already have a custom kernel is recommended to dirty flash your rom before flash this kernel)
* Reboot
*Install your preffered kernel tweaker app and profit
CHANGELOG
HERE
DOWNLOADS
HERE
Thanks and Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
*LordBoeffla
* ZaneZam
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
* moludo
* Lozo2010
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
XDA:DevDB Information
RADIOACTIVE KERNEL CM13, Kernel for the OnePlus One
Contributors
acuicultor
Source Code: https://github.com/acuicultor/boeffla-kernel-cm-bacon
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: V3.18
Beta Release Date: 2015-12-03
Created 2015-12-01
Last Updated 2015-12-18
Yeah, marshmallow is now complete..
Oh yeah, finally. Thanks @acuicultor
This kernel seems awesome !
Boeffla +zzmoove (+native hotplug) are one of the best combo !!
Just one question:
can we expect omni/slim support in the future ?
Thanks a lot
MBurns2 said:
This kernel seems awesome !
Boeffla +zzmoove (+native hotplug) are one of the best combo !!
Just one question:
can we expect omni/slim support in the future ?
Thanks a lot
Click to expand...
Click to collapse
There's already omni/aosp support by this kernel in another thread. I believe you can't find a marshmallow rom that can't become radioactive..
Setting.Out said:
There's already omni/aosp support by this kernel in another thread. I believe you can't find a marshmallow rom that can't become radioactive..
Click to expand...
Click to collapse
This is a great news !! can't wait to try zzmoove on omni
MBurns2 said:
This kernel seems awesome !
Boeffla +zzmoove (+native hotplug) are one of the best combo !!
Just one question:
can we expect omni/slim support in the future ?
Thanks a lot
Click to expand...
Click to collapse
Setting.Out said:
There's already omni/aosp support by this kernel in another thread. I believe you can't find a marshmallow rom that can't become radioactive..
Click to expand...
Click to collapse
MBurns2 said:
This is a great news !! can't wait to try zzmoove on omni
Click to expand...
Click to collapse
Radioactive aosp kernel boots on omni but unfortunately camera don't work properly, pics are shown upside down beside that everything is working flawesly.
Enviado desde mi A0001 mediante Tapatalk
New build up!!!! Changelog and download link on op.
Enjoy!!!
Enviado desde mi A0001 mediante Tapatalk
Amazing ???
New build up!!!
disabled alucard hotplug till i find a way to make it work properly and compiled with latest ubertc 5.2.1 from 15/11/30.
enjoy!!!
acuicultor said:
New build up!!!
disabled alucard hotplug till i find a way to make it work properly and compiled with latest ubertc 5.2.1 from 15/11/30.
enjoy!!!
Click to expand...
Click to collapse
Sorry but your latest build doesn't seem to boot..
fabio.pagliuca said:
Sorry but your latest build doesn't seem to boot..
Click to expand...
Click to collapse
Sorry, download it again it seems i made a mistake uploading the file. Now is good. Sorry again for any inconvenience.
Enviado desde mi A0001 mediante Tapatalk
acuicultor said:
Sorry, download it again it seems i made a mistake uploading the file. Now is good. Sorry again for any inconvenience.
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
No problem, thank you
any recommended kernel tweaking for best battery life without sacrificing performance? Also I receive horrible connection during school, and thats one of my biggest factors of battery drain, is their any tweak/mod fix for this?
Synapse keeps crashing if I try to restore any profile , has anybody experienced this? If
Sent from my A0001 using Tapatalk
joshiameya said:
Synapse keeps crashing if I try to restore any profile , has anybody experienced this? If
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I guess you want to restore a profile made for another kernel, then its normal what happens to you.
Enviado desde mi A0001 mediante Tapatalk
acuicultor said:
I guess you want to restore a profile made for another kernel, then its normal what happens to you.
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
Well its AK kernel profile, and this kernel is similar, so I thought it might apply this profile
Sent from my A0001 using Tapatalk
Added to OnePlus One index thread:
[INDEX] OnePlus One
New build up!!!
Enabled Alucard hotplug again by popular demand its wip but its usable although not all tunables working, added Elementalx governor, compiled with optimized toolchain and removed some confictive compilation flags.
Download link and detailed changelog on op.
Enjoy!!!!!
Enviado desde mi A0001 mediante Tapatalk
acuicultor said:
New build up!!!
Enabled Alucard hotplug again by popular demand its wip but its usable although not all tunables working, added Elementalx governor, compiled with optimized toolchain and removed some confictive compilation flags.
Download link and detailed changelog on op.
Enjoy!!!!!
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
Thanks sir!
Just reporting, for some reason when I try zzmoove profiles I get random reboots.. Maybe was my fault because of something I did but idk..
Thanks for your kernel!
Edit: I didn't try with the last release yet
Sent from my A0001 using Tapatalk
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at yo
*/
This is my 2nd kernel for our thomas device. based on latest kumajaya kernel source with some modification added. Compatible only for CM12 roms. if you flashing this to another roms based on cm12 you'll faced audio and camera bug. unless, you ask the developer to update they rom with latest source from kumajaya :fingers-crossed:
Features:
OC cpu to 1.4MHz
UC & OC GPU
18 Cpu govs
Intelliplug, msm hotplug, mpdecision hotplug, alucard hotplug, Thunderplug
Intelli thermal & Custom thermal
Adreno idler
KCAL
USB fastcharge
10 i/o scheduler
qpnp vibration
Fsync & Dynamic fsync
Powersuspend
Advance TCP congestion
State notifier
LCD notifier
More more....
Instalation:
Download the file kernel
Go to your recovery (TWRP recommended)
Backup your boot partition
Install file kernel without wipe
Reboot
Done
Thank to:
Ketut Kumajaya
Tarun93
haikalizz
sultanqasim
Ashish94
Khusika Dhamar Gusti
Mr-AW
XDA:DevDB Information
Octopus Kernel, Kernel for the Xiaomi Redmi 2
Contributors
ocoot
Source Code: https://github.com/ocoot/octopus_kernel_msm8916
Kernel Special Features:
Version Information
Status: Stable
Created 2016-03-28
Last Updated 2016-04-14
Updates section
DOWNLOAD
DEV-HOST
CHANGELOG
14-04-2016:
*new: UKSM added
*new: Add DanceDance Govs
Reserved
Issue/bug
1. Touchscreen not responsive in charging mode
2. Blue flickering in camera
billbuds said:
Issue/bug
1. Touchscreen not responsive in charging mode
2. Blue flickering in camera
Click to expand...
Click to collapse
1. it's not happend here. waiting another respons
2. IMHO. like cm13 before, it's bcz device tree problem. also ask kumajaya to confirmed it
1.4 ghz not mhz correct it bro..!
-Sourav_8434
Thanks for your Kernel for cm12.1. I tested during a normal day of my use (twitter, whatsapp and a few games). Not warmed up and the battery lasted all day. I could not see if the touch hangs during charging because left overnight in charge. In Kernel Auditor that there are several hotplugs connected, is this normal?
My configuration:
HM2014819
Build 20160318 kumajaya
1400~200MHz
Elementalx
sio
Westwood
Revert this bro !
https://github.com/kumajaya/android...mmit/25d12669b4ebaf3213397c9f992ba158e97dc0a2
This is touchscreen problem in CM13 kumajaya Old build
Sourav_8434 said:
1.4 ghz not mhz correct it bro..!
-Sourav_8434
Click to expand...
Click to collapse
thankyou!
bruxef said:
Thanks for your Kernel for cm12.1. I tested during a normal day of my use (twitter, whatsapp and a few games). Not warmed up and the battery lasted all day. I could not see if the touch hangs during charging because left overnight in charge. In Kernel Auditor that there are several hotplugs connected, is this normal?
My configuration:
HM2014819
Build 20160318 kumajaya
1400~200MHz
Elementalx
sio
Westwood
Click to expand...
Click to collapse
it's normal. just switch off the others hotplug
billbuds said:
Revert this bro !
https://github.com/kumajaya/android...mmit/25d12669b4ebaf3213397c9f992ba158e97dc0a2
This is touchscreen problem in CM13 kumajaya Old build
Click to expand...
Click to collapse
as your wish https://github.com/ocoot/octopus_kernel_msm8916/commit/370dca9d236452ec6ef94c2dd1098c0cff3c4bca
Work flawlessly with cm12.1 build 0312 . Thank you ?
Sent from my 2014817 using Tapatalk
asterix14 said:
Work flawlessly with cm12.1 build 0312 . Thank you
Sent from my 2014817 using Tapatalk
Click to expand...
Click to collapse
thankyou. waiting for the review
Waiting new build and testing new commit in your github.
I'm getting a message after restart saying that ( unfortunately com.process. phone) stopped working.
After resetting also the message appears
Rom-Cm12
Help me out
this kernel is by far the best custom kernel for cm 12.1
job executed flawlessly .. nice one bro!
@ocoot maybe you could add DT2W from @pirej to this kernel?
Many thanks!
Riyanx55tu said:
I'm getting a message after restart saying that ( unfortunately com.process. phone) stopped working.
After resetting also the message appears
Rom-Cm12
Help me out
Click to expand...
Click to collapse
What version of your rom you using?
inpamcoxie said:
this kernel is by far the best custom kernel for cm 12.1
job executed flawlessly .. nice one bro!
Click to expand...
Click to collapse
thankyou
proudh0n said:
@ocoot maybe you could add DT2W from @pirej to this kernel?
Many thanks!
Click to expand...
Click to collapse
dt2w still unstable. maybe no for the future until it's stable
in resurrection remix last LP update 5.9.9,the kernel is smooth but am getting error in camera.any solution?
superstar007 said:
in resurrection remix last LP update 5.9.9,the kernel is smooth but am getting error in camera.any solution?
Click to expand...
Click to collapse
you need to ask the developer for update the RR upstream for lolipop
Touchscreen in charging mode is fix ???
Sent from my 2014817 using XDA-Developers mobile app
billbuds said:
Touchscreen in charging mode is fix ???
Sent from my 2014817 using XDA-Developers mobile app
Click to expand...
Click to collapse
i don't know. try it
RADIOACTIVE KERNEL
for NOUGAT Roms!
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
hi XDA community, i'm here to share with you my little project,i'm a noob just willing to learn all about android world and at this point i'm building from source just using custom toolchains and making few changes like changing optimizations flags,adding or deleting hotplugs and governors ,nothing more till now but i'm enjoying my builds and want to contribute to this community, well let's start.
THIS IS BY NO MEANS COMPLETELY MY WORK,this is 50% @ak kernel source modified to suit my needs
Current Features
General List:
Compiled with Uber-naro 4.9 Toolchain
New Synaptic drivers from CM12.1 - per-panel firmware loading
Linux 3.4.112
Latest CM14 Bacon patches
Latest Common Branch patches
Latest Linux 3.4.x patches
Universal Kernel Control Support (Integrated into Kernel ZIP)
Synapse Enabled
Anykernel Ramdisk Format (Compatible with all ROMS)
Bricked hotplug driver (Enabled by default)
Intellihotplug hotplug driver
Alucard hotplug driver
Zen decision hotplug driver
Zzmoove native hotplug canbe activated setting disable hotplug to 0 in his tunables
CPU Freqs Table: 268Mhz 2880Mhz
GPU Freqs Table: 200Mhz 587Mhz
CPU Freqs Limiter Drivers
Intellithermal full Control
XZ Kernel Compression
LZ4 Support
ZRAM Support
Option to enable/disable Fsync
Deadline, Row, Cfq, Bfqv7r5, Noop, Fiops, Sio, SioPlus, VR, Zen, Tripndroid
Disabled IO Stats
Smartmax, Interactive, Conservative, Impulse, ZZmoove, Performance,Smartmax_eps,Elementalx,Yankactive,Opt imax,Bioshock,Alucard,Dancedance,Darkness,Intellim m,Hyper,Barry Allen,Bluactive,Adaptive,Wave,Wheatley,Lionheart,P egasusq
Kcal Control: Colors, Saturation, Huge, Contrast and more
Kcal Profiles Supports
Voltage Control
Sound Control
Charge Control
Kexec Hardboot - Multirom
Ntfs Support
Gentle Fair Sleepers (Disabled by default)
CIFS Enabled
NFS v3 & v4.1 Enabled
Optimized RWSEM Algorithm
Auto FS Laptop Mode
Arch Power
Power efficient workqueues
Ksm
Sdcardfs enabled
custom splash image
[ RADIOACTIVE KERNEL INSTALL ]
Instructions:
* Boot into Recovery
* (Recommended) Make a complete backup of entire rom
* Flash Zip( if you already have a custom kernel is recommended to dirty flash your rom before flash this kernel)
* Reboot
*Install " Synapse " app from Market
CHANGELOG
× Here
DOWNLOADS
× Here
THANKS!!!!
Thanks and Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
*LordBoeffla
* ZaneZam
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
*nikhill
* FranciscoFranco
* Ak
* moludo
* Lozo2010
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work
XDA:DevDB Information
RADIOACTIVE NOUGAT KERNEL, Kernel for the OnePlus One
Contributors
acuicultor
Source Code: https://github.com/acuicultor/android_kernel_oneplus_msm8974
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: V1.5
Beta Release Date: 2016-08-28
Created 2016-08-28
Last Updated 2016-12-15
Can i flash this on updateings ROM?
SaneQ said:
Can i flash this on updateings ROM?
Click to expand...
Click to collapse
sure
cool
You're fast...
Can confirm working on @updateing 's N Build.
The only problem for me, is slow charge.
Good kernel
Working fine on updating's Build. Great work mate. BTW Phone is very hot to the touch with both stock kernel and this one. Can any good soul suggest me a workaround/ tweaks to fix this? Thanks in advance.
aukdrck said:
Working fine on updating's Build. Great work mate. BTW Phone is very hot to the touch with both stock kernel and this one. Can any good soul suggest me a workaround/ tweaks to fix this? Thanks in advance.
Click to expand...
Click to collapse
Make sure this process is killed:
com.qti.dpmserviceapp
Some people just blocked it's notification and it continues to run in the background.
Better yet, update to the 8/28 build of the 7.0 ROM
Hi Acuicultor!
You could put fast charge in your kernel?
To appers and change ma on Synapse
Please ^^
Tnx and amazing kernel
KenjiHannya said:
Hi Acuicultor!
You could put fast charge in your kernel?
To appers and change ma on Synapse
Please ^^
Tnx and amazing kernel
Click to expand...
Click to collapse
Already there
Enviado desde mi A0001 mediante Tapatalk
How can I make this work with Chainfire's systemless root?
dev_freak said:
How can I make this work with Chainfire's systemless root?
Click to expand...
Click to collapse
There's any problems with supersu systemless, just flash latest supersu zip.
Enviado desde mi Z1 mediante Tapatalk
Great work, running so smooth.
Thanks for the job!
Enviado desde mi OnePlus One.
Good Kernel.
I did something in the first test was not the same.
But clean flash give me this sot
No lags
Good SOT
Good performance and I will keep trying to create a better profile
https://plus.google.com/+JPKenji/posts/SbQoTpRCMFC
Tnx for the Kernel
Good work!
crisis_trustee said:
Good work!
Click to expand...
Click to collapse
Yeah, the answer was pretty obvious, wasn't it? I'd be facepalming myself to unconsciousness if you thought flashing this kernel on any Marshmallow rom would be a good idea.
Camera fix ??
Sent from my A0001 using XDA-Developers mobile app
billbuds said:
Camera fix ??
Sent from my A0001 using XDA-Developers mobile app
Click to expand...
Click to collapse
Depends what it is this fix.
In N all Kernel i testes dont record video
Is it supports f2fs on data and cache
Code:
[FONT="Times New Roman"][COLOR="Blue"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and no point
* in pointing the finger at me for messing up your device
*/[/COLOR][/FONT]
This kernel is compiled from official xiaomi source for redmi 2 (ido-l-oss) and much thanks to @premaca for fixing the source code to our device.
Features:
Built using Google 4.8 toolchains
OC CPU 200-1.4Ghz
OC GPU 100-465Mhz
I/O Schedulers: cfq, deadline, fiops, noop, row, sio, sioplus, tripndroid, zen
CPU Governors: barry_allen, bioshock, blu_active, darkness, despair, hyper, impulse, intelliactive, intellidemand, interactive, lionfish, ondemand, pegasusq, performance, powersave
CPU Hotplug: Zen Decision, MPDecision, IntelliPlug, MSM Hotplug, Mako Hotplug, Bricked Hotplug, Alucard Hotplug, Auto SMP, MSM Sleeper
Double Tap2Wake
KCAL
fsync on-off
Advance TCP Congestion
Qualcomm thermal replaced with Intelli Thermal
LZ4-compressed kernel
Frandom Drivers
Kernel Power Suspend
Disabled updating idle time if cpu offline
Included More ZRAM Devices
More more more...
Instalation steps:
Download the link
Place on your storage
Going to your recovery
Backup you current kernel first
Then, Install the file zip (without wiping anything)
Reboot
You're done
Update changelog L and MM kernel:
F2FS now support
Removed Intelli Thermal
Removed Intellidemand
Download Link:
Kernel Folder: https://www.androidfilehost.com/?w=files&flid=109722
[12-09-2016] For CM12.1 Based Roms: https://www.androidfilehost.com/?fid=24588232905725142
[12-09-2016] For CM13 Based Roms: https://www.androidfilehost.com/?fid=24686680535467946
Dev note:
Bug like music crash on CM13 still on progress to fix. maybe will take a longer time for this and i hope i can solved this one
If you take CM12 Based kernel, you faced camera bug and probably audio bug if you using this kernel. You can use CM12 based rom with uptodate source to solved this problem quickly.
Credits:
Xiaomi
premaca
ketut kumajaya
DoomLoRd
Santhosh
savoca
AudioGod
NeoBuddy
Fransisco Franco
XDA:DevDB Information
Octopus Kernel, Kernel for the Xiaomi Redmi 2
Contributors
ocoot
Source Code: https://github.com/ocoot/octopus-kernel
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2016-09-10
Created 2016-09-10
Last Updated 2016-09-11
Superb finally we can enjoy many hot plug
Thank you so much Dev
xda-x-man said:
Superb finally we can enjoy many hot plug
Thank you so much Dev
Click to expand...
Click to collapse
need a review from user who already using this kernel
ocoot said:
need a review from user who already using this kernel
Click to expand...
Click to collapse
Okay, I flashed this kernel on mokee latest stable version
I must say kernel has lots of tweaks and features.
In term of performance wise it's great and fluent animations.
Well we have so many governors and hotplugs.
Mokee with stock was lagging but with octopus kernel working without a single lag.
Multitasking also smooth.
One word for this kernel it's ...mind blowing
Thank you dev
@ocoot I've flashed it over CM13 nightly and it works very nice. It has many things that can be tweaked and it performs great. I simply love it.
The only issue I've found is that the headset controls are not working. This seems to be a common issue to all the kernels based on official source. Jerrica and Berserk-Jerrica also have this issue. Maybe someone can look into it? CM based kernels have headset controls working fine BTW.
Many thanks for this kernel!
proudh0n said:
[MENTION=4618394]
The only issue I've found is that the headset controls are not working
Click to expand...
Click to collapse
I have apple earpods and all working
WestFring said:
I have apple earpods and all working
Click to expand...
Click to collapse
I have the Xiaomi Piston 3 and with this kernel the volume controls do not work. With stock CM13 kernel they do. Also, the music cannot be played with any music player or file manager. This issue is also present on Jerrica. My model is 2014811 1GB, if that helps.
I'll provide logs as soon as possible
@ocoot Here is the logcat about the music playback and volume controls issue. I think i'll tag also @premaca because as I said this happens also on Jerrica for me. I hope i didn't bother you by tagging both of you on this response.
For more details:
ROM: CM 13.0-20160908-NIGHTLY-wt88047
Kernel: 3.10.49-octopus-g6a3da7c
SELinux: permissive
I didn't touch any kernel configurations and I don't use any audio mod. I've tried playing music with stock CM13 player, Shuttle+ and the file manager Solid Explorer. All of them try to play the song and it gives an error.
Many thanks for your contribution!
so far so good, this kernel should be available when cn14 released for our device
thermal control is not working properly,errors in the records hotplagov-1 core at the maximum frequency, the rest sleep
What about F2FS suport?
Nice to see more and more kernels.
Will try and report for sure, Greetz.
Music crashed
ocoot said:
need a review from user who already using this kernel
Click to expand...
Click to collapse
Have tried a few kernel before this , all of them crashed my music app .. Mybe its my phone , but i dont think so .. Using cyanogenmod official nightlies ..
DenHafiz69 said:
Have tried a few kernel before this , all of them crashed my music app .. Mybe its my phone , but i dont think so .. Using cyanogenmod official nightlies ..
Click to expand...
Click to collapse
It's the kernel based on official sources, the kernels based on kumajaya's source have no issue with music playback on CM13. I have the same problem
proudh0n said:
@ocoot Here is the logcat about the music playback and volume controls issue. I think i'll tag also @premaca because as I said this happens also on Jerrica for me. I hope i didn't bother you by tagging both of you on this response.
For more details:
ROM: CM 13.0-20160908-NIGHTLY-wt88047
Kernel: 3.10.49-octopus-g6a3da7c
SELinux: permissive
I didn't touch any kernel configurations and I don't use any audio mod. I've tried playing music with stock CM13 player, Shuttle+ and the file manager Solid Explorer. All of them try to play the song and it gives an error.
Many thanks for your contribution!
Click to expand...
Click to collapse
i'll check it later. thankyou
zieruchan said:
so far so good, this kernel should be available when cn14 released for our device
Click to expand...
Click to collapse
thankyou :good:
olegst said:
thermal control is not working properly,errors in the records hotplagov-1 core at the maximum frequency, the rest sleep
Click to expand...
Click to collapse
i would to revert the intelli thermal later. this is may cause the problem
boris_k said:
What about F2FS suport?
Click to expand...
Click to collapse
will added soon!
DenHafiz69 said:
Have tried a few kernel before this , all of them crashed my music app .. Mybe its my phone , but i dont think so .. Using cyanogenmod official nightlies ..
Click to expand...
Click to collapse
proudh0n said:
It's the kernel based on official sources, the kernels based on kumajaya's source have no issue with music playback on CM13. I have the same problem
Click to expand...
Click to collapse
thankyou, i'll check it later. i hope can find the problem of this
ocoot said:
will added soon!
thankyou, i'll check it later. i hope can find the problem of this
Click to expand...
Click to collapse
Plss Increase the incall volume it is two low when compared to CM Stock kernel.
Sometimes when the device reboot, CPU stuck at lowest frequency and need to reboot again to fix.
when exiting sleep all the nuclei fixed at the maximum frequency.any hotplage.
This happens with any change frequency settings, or govornona hotplaga
P.S. after switching off locations all earned.very good core
you plan to update security patches?