G955F/FD Dr.Ketan ROM DeKnoxed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM Features (Pie)
- Based on latest Official Pie SBA
- Included stock enforcing kernel
- Tested EdXposed and working
- DEX supported (Not tested)
- PowerMenu Option (Long press Power) for Reboot to Recovery (This Option varies for Tweaks Pro users)
- SPay with Gear wearable (Only supported models) - Provided you have installed required packages and hidden 'pay' stuff with magisk hide.
- Reduced call disconnect delay.
- High Volume warning disabled
- Screenshot in Secure Tab
- Denoxed with minimally debloated (tried to preserve most functions though)
- 3minit battery (ROM Tool)
- Dolby can be used on Phone speaker too (Try only after applying Essential fix from Tool)
- Camera record 60 fps (not tested)
- Dual Messenger for all app mod (Aroma selectable)
- Dual SIM + SD card fix as aroma selection so ROM can be flashed without removing second SIM (Recommended to select same from ROM Tool later)
- Added some important samsung stuff
Calculator
Music
S Health
- Titanium Backup (aroma selectable)
- Internet browser Secret mode
- S Health patched for using with rooted device.
- Able to web login with biometrics on samsung browser
- ROM Tool with following options
Ad-Free Quick Panel Toggles
PowerMenu Quick Panel Toggles (Power Off/Reboot/Recovery)
Auto detect Busybox and auto flash if requires.
NavigationBar heights on the fly (Smaller/Stock)
Long Press Home customization : Select Device assistance as LP Home from settings, then select if you want to use it to assign to any available app/service), You can reset choice from ROM control
Scloud - As this is major battery killer, You ca enable/disable anytime from ROM control
Fbind Helper : Small tool to use Fbind magisk module (Need to install separately from Magisk - Download - Magic Folder Binder. It is same like folder mount. You can mount Int SD folder to Ext SD
Viper sound mode - Single click enable/disable Viper sound mode
ROM Control - See below for more details
Battery icon - stock/3minit battery on the fly.
Clock Position - Left/Center/Right on the fly.
Mods & Fix
Enable Dual SIM + SD support
Netflix/Optus sport fix
BT Pair fix - N960F ROM shouldn't have issue out of box but can trigger with flashing xyz, Use only if you are having issue
Auto Call Record (Without CSC features)
Biometrics on Reboot. If you want to login bank app/Paypal with fingerprint, you need to disable this.
Update & Fix section
ROM Control Fetures
PowerMenu with Long Press Power
Battery Bar with thickness and color option
Network meter with Toggle (Lt/Rt/Quick Panel/None) with color option
Virtual Key with Toggle (Lt side - Menu, Rt side - Power, Centre - Home)
Double tap statusbar to sleep
Navigation Bar color
PS : There may be few more options will be there but won't work if those are not mentioned here.
Oreo
ROM Features (Oreo)
- Based on official oreo G955FXXU4CRGH
- S9+ Features - Very limited port. Better can say features port. Some S9+ features ported like
Live Wallpaper
Video play on LockScreen
Dolby
- Device status set to Official
- Included wide range of CSC (Total 213)
- Decrypted CSC features
- DEX ready (Not tested)
- OMC flash have now three option
G955F omc
G955N omc
skip (NO omc)
- Aroma includes option to root(magisk)/No root (For SuperSu - read below add on at end of post)
- Good LOck 2018
Edge lighting plus (aroma selectable)
Side Key (One hand Operation) - Aroma selectable
QS Color - ROM Tool (No CSC restriction)
Lock Star - ROM Tool (No CSC restriction)
Task Changer (Recents) - ROM Tool (No CSC restriction)
Routines - ROM Tool (No CSC restriction)
- Clock Face for AOD and LockScreen
- Included stock enforcing kernel
- Reduced call disconnect delay.
- High Volume warning disabled
- Hign brightness strain warning disabled
- Screenshot in Secure Tab
- Camera flashlight up to 1% battery
- Denoxed with minimally debloated (tried to preserve most functions though)
- Ad-Free preactivated Toggle in ROM Tool
- Enabled Launcher Rotation Toggle in launcher settings.
- Reboot to recovery (If not available, apply essential fix from ROM Tool)
- 3minit battery and 3minit clock (you will get option to choose just after finishing setup, also you can change anytime from ROM Tool)
- Added some important samsung stuff
Calculator
Email
Music
Samsung Gear
S Internet
- Titanium Backup aroma selected
- SystemUI mods
No secure login (After reboot no need to compulsory use PIN, it can be unlocked with fingerprint)
Battery Bar with thickness and color option
Network meter with Toggle (Lt/Rt/Quick Panel/None) with color option
Virtual Key with Toggle (Lt side - Menu, Rt side - Power, Centre - Home)
Double tap statusbar to sleep
- Internet browser Secret mode
- S Health patched for using with rooted device.
- Able to web login with biometrics on samsung browser
- ROM Control (ROM Tool - ROM control) with following option
Toggles for System UI as mentioned above
Sound modes (Untested)
There are few more options will be there but won't work if those are not mentioned here.
- ROM Tool with following options
Auto detect Busybox and auto flash if using magisk, Manual option to install for SuperSU users)
NavigationBar heights on the fly (Smaller/Stock)
Long Press Home customization : Select Device assistance as LP Home from settings, then select if you want to use it to assign to any available app/service), You can reset choice from ROM control
Scloud - As this is major battery killer, You ca enable/disable anytime from ROM control
Fbind Helper : Small tool to use Fbind magisk module (Need to install separately from Magisk - Download - Magic Folder Binder. It is same like folder mount. You can mount Int SD folder to Ext SD
Battery and Clock selection - Select stock/3minit battery/clock on the fly.
EFS Backup. Single click EFS Backup (Storage location - Int Storage/MyEFS)
Viper sound mode - Single click enable/disable Viper sound mode (should work with both magisk/supersu) & option to choose old/New viper, You can switch between anytime (just reboot needed in between)
If you want to use any other version of Viper, first enable one(Old/New) and then you can install other version as regular apk to work.
Also to note that, viper will work after 15-20 sec of rebooting device (you will see a toast msg Viper activated' after every boot if you have enabled it).
Some additional toggles (will auto apply on first boot or you can force apply by - ROM Tool - Apply essential fix)
NavigationBar custom color
Update & Fix section
Important instruction for ROM Tool - After clean install ROM Tool should ask supersu permission on first boot, if you don't see call then manually check magisk/supersu log
- Multi CSC. It contains many CSC inside (All included under 'OXM') and will auto installed. If you have other CSC installed (Other than Original One), you may get message to RESET after first boot. In that case, you will lose root and have to flash magisk again to retain root access.
- Xposed Installer Pre installed without framework
If you don't using xposed - simply uninstall it as regular user app and it won't change anything
If you want to use xposed - Open Xposed installer from app drawer - Click on cloud symbol below - Install/Update - Select 'Install' - Grant SU access -
Reboot when script run and ask to reboot. First time it may take longer to boot.
After boot, you will have Xposed ready to use.
Click to expand...
Click to collapse
* Some fetures may vary depend on ROM version. Read changelog post for latest update and features of current version.
Credit and Thanks :
@Chainfire - Respected elite developer for supersu and his unbelievable contribution to XDA/Android community. @wanam - Respected elite developer for his awesome contribution and references to his works.
@topjohnwu for Magisk
@xperiacle the amazing developer for reference to his work and tools. @gharrington for 3minit battery and QuickLaunch.
ROM Control source and all credit and thanks goes to @daxgirl and @Wuby986 for their open source project for RomControl.
@Tkkg1994 for his permissive kernel @AbrahamGC for some ideas @frap129 for Spectrum app. samsungvn htcmania for tips and some stock apps
XDA:DevDB Information
Dr.Ketan ROM S8, ROM for the Samsung Galaxy S8
Contributors
dr.ketan
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2018-09-12
Last Updated 2019-03-07
Installation and Download
For S8+ (G955) users
Important :
- This will void warranty.
- As of now you will lose Samsung Pay and Secure folder forever if you root once, even unrooting won't help. (hope in future we can get it working on tripped knox device)
- OTA likely won't work once you root device.
Installation :
If you are on stock ROM/Recovery, follow below said steps
1.Enable Developer Option (settings - about phone - Software information - Tap 7 times on build number to activate developer option in settings menu)
2.Enable OEM Unlock from developer option (If you don't have this option then read this you can't flash ROM before this option available.)
3.Download and copy ROM File to Ext SD card, Use ES file/Root explorer or any similar to check MD5, it should be match with provided in download section.
4.Download official TWRP
5.Switch Off device
6.Press Vol down + Bixby + Power to reboot to download mode, press volume up when asked to continue to download mode
7.Download Odin and open it, Disable 'Auto reboot' from option menu of Odin
8.Select TWRP (tar image) with AP tab of Odin and Start
9.Once Successfully flashed, you will see 'Passed' in Odin tab
10.Disconnect device and hold Vol down + power till screen goes off, Now immediately press Vol Up + Bixby + Power to reboot to TWRP
11.Select to allow modification
12.From TWRP, Select WIPE menu - Then FORMAT DATA - You need to type 'yes' to perform wipe. WARNING : This will erase all data including Int SD storage from device
13.Once format device completes, go back and select REBOOT' Menu and then - 'RECOVERY', This will reboot to TWRP again
14.Now select Install and navigate path to Ext SD card - ROM zip file, you have copied earlier
15.Let device boot, and read ROM specific Instructions below.
If you are on CWM recovery and custom ROM already, Follow below said steps.
1.Download ROM zip and place on Int Storage/Ext SD and check MD5
2.Reboot to recovery and select factory reset and flash ROM zip you have copied in step 1.
3.Let device boot,Read ROM specific instructions below.
Click to expand...
Click to collapse
Some ROM specific instructions
1. On boot, you may not able to use ROM tool or some few features for first few minutes. This issue explained in MustRead.txt file in download area.
3.Since Pie version, OEM is pre-fixed with kernel patch and after flashing ROM, you may find OEM option in developer settings but it will be disable, it is actually because of hack/fix applied. In real case if it is disabled then you may not able to boot rom with TWRP. Simply ignore it.
Read ChangeLog of ROM you are going to flash for any specific instructions. Link to changelog is available in next post below.
Can I dirty flash (without factory reset) ROM? No, We don't recommend it. If you are able to handle consequences with dirty flash then proceed, but don't post bugs in forum without clean installing ROM.
PS : Who can handle consequences of dirty flashing, they never need to ask this question in forum.
Download : http://www.drketanrom.com/s8plus.html
Instructions provided above are for latest version of ROM only, on previous versions of ROM it may or may not be same, we recommend to flash latest ROM only.
ChangeLog
Oreo
O1 - 12.09.2018 - Initial Release
Pie
P01 - 07.03.2019
Bootloader and Model
And last -
This ROM is ditto of my Note 8 ROM except changed Base to S8+ to make it stable for this device. Indeed spend only few hrs to made this.
I may not regular update this ROM as I don't have S8+ access always, I have made this for my daughter so sharing it here if any users want to use it. I will look into it if there is major bug there. In future I may update ROM if get chance but NO promise.
G950f supported?
Dome12 said:
G950f supported?
Click to expand...
Click to collapse
Not tested on S8 but it should work. Keep S8 kernel on device if requires. Let me know if any issue then I will check it.
S8 950F booted fine with Nox 16... testing rom right now, everything seems to work great and lots of customization. TNX alot!
pajaSRB said:
S8 950F booted fine with Nox 16... testing rom right now, everything seems to work great and lots of customization. TNX alot!
Click to expand...
Click to collapse
Thanks for testing and reporting
Does included kernel failed or you have not tried it and straightway flashed nox?
dr.ketan said:
Thanks for testing and reporting
Does included kernel failed or you have not tried it and straightway flashed nox?
Click to expand...
Click to collapse
Included didn even try, i flashed nox 16 straight after your super rom.
pajaSRB said:
Included didn even try, i flashed nox 16 straight after your super rom.
Click to expand...
Click to collapse
Thanks
Let me know if any bug found on S8
dr.ketan said:
Thanks
Let me know if any bug found on S8
Click to expand...
Click to collapse
flashed on s8 950f no problem thanks for the rom
Two battery icons.(one is default samsung theme and other is black themed )
This two are not working.
destan4503 said:
flashed on s8 950f no problem thanks for the rom
Click to expand...
Click to collapse
Thanks for reporting
pajaSRB said:
Two battery icons.(one is default samsung theme and other is black themed )
This two are not working.
Click to expand...
Click to collapse
ROM tool have option to hide one battery, if you have double icons even after selecting stock icon in rom tool then might be theme causing it
As workaround try this
Select 3minit, this will disable Samsung stock icon, and disable 3minit icon from 3minit app
Those two features are likely csc related and may needed some modification in system.
dr.ketan said:
Thanks for reporting
ROM tool have option to hide one battery, if you have double icons even after selecting stock icon in rom tool then might be theme causing it
As workaround try this
Select 3minit, this will disable Samsung stock icon, and disable 3minit icon from 3minit app
Those two features are likely csc related and may needed some modification in system.
Click to expand...
Click to collapse
No luck...still have two battery. In status bar all is perfect but in setting two battery options.
pajaSRB said:
No luck...still have two battery. In status bar all is perfect but in setting two battery options.
Click to expand...
Click to collapse
Try removing theme and see if that causing issue
dr.ketan said:
Try removing theme and see if that causing issue
Click to expand...
Click to collapse
Funny thing is that I have only stock theme no other installed.
Also this happens when i change navbar hight.
pajaSRB said:
Funny thing is that I have only stock theme no other installed.
Also this happens when i change navbar hight.
Click to expand...
Click to collapse
Stock?
Can you link me that? Navbar height can be bcoz of different size of display, can be fixed.
Can you show me clear image of statusbar? I can see single icon only. Possibly blank space both the side is bcoz of different size of s8 s8+, also easy to fix probably
dr.ketan said:
Stock?
Can you link me that? Navbar height can be bcoz of different size of display, can be fixed.
Click to expand...
Click to collapse
View attachment 4594531
Link?
Anyway man everything is soooo smooth and fluid not a single hick up.
Related
Dr.Ketan custom ROM based on N910F NK4 (DBT)
There is already a ROM from me for N910G but after some request here releasing a ROM that based on N910F (Germany)
All features of my ROM for N910G is here too but in addition to that some more features added. Here below is description of features.
ROM Base : N910FXXU1ANK4_N910FOXA1ANK4_N910FXXU1ANK4_Germany
Pre rooted, Zip aligned Busybox Odexed
ROM Additional Features.
-All Languages enabled
-300 Fonts included
-System default Stock battery. 3minit battery Mod available in AddOn (post #3)
-4 Way Reboot Mod
-Two PullUp mods (You can set desired app for gesture settings)
Side Pull up
Long Press Menu
-System default MenuKey reassigned for Menu. You can toggle it from ROM control
-My Sfinder - To choose SFinder from pullUp
-SecLauncher Mod for Hide App and PullUp
-Briefing App - To select dom pullup for Original animation of stock briefing on Lt side launcher.
-Camera Mods - Use camera with Flash at low battery + Shutter sound option in settings) + some addition tweaks for Quality and Duration
-Torch(FlashLight)
Long Pressing Vol up
Quick panel Toggle
-360 degree Rotation
-Ink effect Lockscreen
-Three times pressing Home - ScreenShot
-Buil-In Debloating tool to remove nearly 50 safer bloatware (Dr.Ketan Utility-ROM extra)
-Screen Mirror - PreFixed
-Private Mod -PreFixed
-S Health - PreFixed (No needs to use xposed)
-Ext SD write issue - Fixed
-Fixed Titanium backup restore issue (sometimes after restoring app+data with titanium causing FC)
-App Op Native feature in Settings
-All Application in Pen window and Multi window + Multi instance (May not work for all Apps)
-SnapBizCard - Scan visiting card and add information to contacts with OCR)
-25 Quick Panel Toggle (added Torch,Quick connect,PowerSaving and SFinder)
-Extra Call/SMS Blocking mode (Native) with phrase block option in messaging.
-Dual Setting mod. Note4 style and Note3 Style (Tab view). You can hide unwanted from Launcher.
-Extra utilities with Toggles - You can enable/Disable from Settings-Display
Network meter with 6 speed with Toggle
8Extra Toggle in Notification
Virtual Lock button on status bar
Virtual Recent panel on status bar
Menu long press kill App
CPU usage in Expanded notification
Clean memory option in expanded Notification panel
RomControl - Find in Application drawer
- DPI select (640/600/560/520/480 DPI) Note that some app requires to set 640 DPI with app setting xposed module.
- FullScreen Caller ID
- Menu key assign to Menu/Recents
- AOSP Tpggles (SystemUI) mods
- Enable Native Call record
-Sound Mod
Mild boost
High boost
Restore stock
Viper mod
Dr.Ketan Utilities (setting-Device-Dr.Ketan ROM Extra-Utilities) OR you can access from App drawer too. - here is latest features of Utility
This utilities have 4 Sections
1.Utilities -Toggles
Auto record Incoming call (make Sounds folder on IntSD if not already)
Auto Record Outgoing call (make Sounds folder on IntSD if not already)
Auto GPS (GPS will auto ON with some common app needs GPS)
Auto Wifi (Wifi will be turn off if remains disconnected for 10min)
Auto Blutooth (will be turn off if remains unpaired for 10min)
Smart Network (Mob data will be switched off after 30 sec of screen off)
Media scanner Enable/Disable
Torch light on shaking device (not working right now)
Login security - captures image with wrong password login with multi attempts.
2.Utilities -Tasks
EFS Backup (For N910G Only)
Data restore Fix
Flash recovery/Kernel from intSD
Auto Scan (If you turn On - Media scanner will run only device conected to charger AC/USB) This will override setting of Media scanner Enable/Disable in Toggle section.
3.Rom Extra settings
PullUp chooser for all pull mod 1.Launcher Lt pull 2.Long Press menu
Debloating Tool
Extra setting 1.Horizontal caliberation 2. Air Guesture (Not tested all may be few are working. I have just enabled hidden settings) 3. Network Restriction)
Meet Here (Find Car)
4.Help and version info.
Advanced function SecMMs
Group messeging
Schedule msg
Backup/Restore SMS to SD card
Recipient limit 999
Original time stamps
Disable SMS-MMS
Raise SMS/hr limit
Split view toggle in setting menu
Increased MMS max size
Increased size of image
No SMS to MMS with Emoji
-CSC features - There is separate App in drawer Samsung CSC feature to add/remove CSC features
CSC features with Backup/Restore option (some features not tested)
Enable camera during call
Enable Popup Notification
Shutter sound Menu
Enable Sub Menu Symbol KB
Raise name lenth limit
Max speed dial 100
Enable call button
Enable export to SD
Message
Raise recepient limit 999
SMS to MMS threshold 999
Enable folder view
Enable font features
Enable schedule msg
Disable phone nu formatting
Phonebook digit matching
Launcher Rotation
Web exit option
Wifi client 10 for MobAP
MultiWindow addOn App
Calender export
Email White BG
Clock enable Auto on off menu
Voice call waitingtone 60
National Roaming Icon enable
Web default desktop site
XDA:DevDB Information
Dr.Ketan Custom ROM, ROM for the Samsung Galaxy Note 4
Contributors
dr.ketan
ROM OS Version: 4.4.x KitKat
ROM Firmware Required: N910F
Version Information
Status: Stable
Created 2014-11-15
Last Updated 2014-12-08
ChangeLog
ChangeLog V2
Installation Instruction (MUST READ before flashing ROM)
1.Download ROM from link shown below in download.
2.You must check MD5 of downloaded ROM and it must be match with provided in download section. Always recommended to check MD5 on device itself as sometimes file can be corrupted while transferring from PC to device.
3.You must have CWM/TWRP recovery on device.
4.To flash ROM root is not required but if you have never backup your EFS then I strongly recommend to root your device first (If not already) then make EFS backup before flashing ROM. Though it's not required to make EFS backup every time you flash ROM but follow developer instruction and if it is recommended with particular version then you must backup again.
You can use this tool OR can get from Play store to backup EFS.
5.ROM flashing
Copy your downloaded file to device then reboot device to recovery (must be CWM/TWRP)
Select wipe data (Factory reset)
Select to Install file and navigate to your ROM file
Flash
6.It may take 5-7 min to boot keep patience.
7.READ Post #3 for Bug / Fix discussion.
Download N910F Dr.Ketan Custom ROM V2
Before flashing ROM you must read Installation Instruction above and Post #3 for Important instructions and known bugs/Fix
N910F NK4 Dr.Ketan Custom ROM V2
.
Important Instructions.
When ROM Installation finish you will get flash message on screen when Dr.Ketan utility about to start some fixing for critical bugs which can't be prefixed. So while you setting up your phone you will get request from Dr.Ketan utility for SuperSU permission. When you grant su permission utility will fix bug and immediately your device will reboot. So just after finishing setup Don't do anything before Utility fix the bugs. Also to note that any FIX/Add On available here only advised to flash only after utility finish the fixing.
MenuKey :
System default Menukey is replaced for menu option and recent panel is assign to status bar Rt side corner with virtual button. This vertual button can be disable from settings- Display - Recent button on statusbar. Long pressing Menu key you will get pullup choice (for your desired application) If you want to use Long pressing Menu key to kill application you have to enable it from settings-Dispaly-Kill Applicaion.
If you want stock Note4 setup for MenuKey - Recent panel there is option in ROm Control app from drawer for MenuKey reassign. You requires to reboot device to apply changes. If you assign MenuKey for recent application, you WON'T be able to use Long Pressing menu pullup/Kill app option.
S-Finder and Quick connect
Is occupying too much space in extended notification panel so I have moved it to quick panel Toggles. Though AddOn will have option to restore it.
Tab Settings (drawer) and Extra Settings (in utility)
are just hidden features brought to surface and don't expect to work completely also to make sure that if any of feature in these two manu are not working have little chance to fix. Simply use if any of it you like and working or just ignore.
Bug ans Fix
Launcher Fix - Flash from recovery
Details - This will Fix missing uninstall icon to drag and drop when you long press user app from drawer.
Add On
- 3Minit battery mod. Thanks and credit @gharrington
- Stock battery mod. - System default is stock battery. This requires only if you flashed 3minit mod and want to revert to stock.
Transparent Theme
Click to expand...
Click to collapse
Shorter Call end delay
This mods reduce call end screen timeout. Call end screen is screen that comes after ending call (In Call screen).
A.Short delay mod - Reduce call end screen time
B.No Call end screen - There won't be call end screen, call will be disconnected right from Incall screen without showing End call screen.
Click to expand...
Click to collapse
- Restore S-Finder & Q-connect in extended notification.
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.
reserved6
Bootloader and modem from N910F NK4 Germany ROM (Read instructions carefully)
1.Download http://d-h.st/tYp
2.Extract downloaded file, you will get two files
a.N910F_NK4_Bootloader_DBT.tar.md5
and
b.N910F_NK4_modem_DBT.tar.md5
3.Flash a.N910F_NK4_Bootloader_DBT.tar.md5 with Odin for PDA tab (This is bootloader)
4.Flash b.N910F_NK4_modem_DBT.tar.md5 with Odin for MODEM tab (THis is Modem)
PS : THIS IS FROM N10F Germany ROM and NOT RECOMENDED TO FLASH ON OTHER VARIANT
Newer version of Odin will have AP and CP option instead of PDA and Modem
Click to expand...
Click to collapse
...
deleted as patience isn't my strong suit lol
utopiate said:
Gingerbread?
Click to expand...
Click to collapse
corrected
Lol !
BTW first time I have created thread with DEVDB project otherwise regularly using thread only so missed.
Congrats!!!! Will try asap! Thank you AGAIN!
I have been using this rom for about 12 hours now and there hasn't been any issues. Quick dpi settings and the aosp toggles look fantastic.
Great work Dr.Ketan
I installed over v1.1 for anyone using that on the n910F. Stock kernel included works perfectly.
Thor said:
I have been using this rom for about 12 hours now and there hasn't been any issues. Quick dpi settings and the aosp toggles look fantastic.
Great work Dr.Ketan
I installed over v1.1 for anyone using that on the n910F. Stock kernel included works perfectly.
Click to expand...
Click to collapse
Over Echo 1.1 you mean? Is a dirty flash over that actually possible..?
Rom has some unique features, wow!
(long time Nexus user here..)
Vangelis13 said:
Over Echo 1.1 you mean? Is a dirty flash over that actually possible..?
Rom has some unique features, wow!
(long time Nexus user here..)
Click to expand...
Click to collapse
I think 1.1 means he might be on my V1.1 for N910G
Apologies. Indeed I do mean v1.1 for the n910g by Dr. Ketan. I think it's safe to say it doesn't need a wide if your on a n910F coming from v1.1 rom that was made for N910g.
I hope that makes sense.
Thanks Dr Ketan , will try it tonight .
Tricky for me because I am more a stock look kind of person , BUT if I can change things to stock with some tweaks and settings I will go and use this ROM as my daily!
Thanks again!
FrankyT-5R said:
Thanks Dr Ketan , will try it tonight .
Tricky for me because I am more a stock look kind of person , BUT if I can change things to stock with some tweaks and settings I will go and use this ROM as my daily!
Thanks again!
Click to expand...
Click to collapse
This ROM is pure stock looks and all theming options like AOSP toggles, 8 Extra toggle, full scree ID are all optional. some options you can enable from ROM control from app drawer and some have Toggle On/Off options in Setting-Display
dr.ketan said:
This ROM is pure stock looks and all theming options like AOSP toggles, 8 Extra toggle, full scree ID are all optional. some options you can enable from ROM control from app drawer and some have Toggle On/Off options in Setting-Display
Click to expand...
Click to collapse
Then this is definitly my kind of ROM , Superb , dr Ketan u rock !
FrankyT-5R said:
Then this is definitly my kind of ROM , Superb , dr Ketan u rock !
Click to expand...
Click to collapse
I second that! Amazing ROM. Dr. Ketan, in case we need call recording on demand (not automatic, for all calls), can we install the Wanam Xposed module? Should we expect any conflicts with the mods already present in your ROM if we activate some of the mods by Wanam?
ernani said:
I second that! Amazing ROM. Dr. Ketan, in case we need call recording on demand (not automatic, for all calls), can we install the Wanam Xposed module? Should we expect any conflicts with the mods already present in your ROM if we activate some of the mods by Wanam?
Click to expand...
Click to collapse
It's already there and no needs to use Wanam module
Open rom control from drawer - select enable native call record.
This will replace add call button with Record button
Sent from my SM-N910G using xda premium
Is this rom odex?
/CK
[N910F] [BOD2] Dr.Ketan Custom ROM L4 I Deodexed I Multi DPI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM Features
Based on N910FXXU1BOD2_N910FFTM1BOD1_N910FXXU1BOC3
Inbuilt features
300 fonts enabled
All Language enabled
Ad Free (you can disable from Dr.Ketan Utility)
Call Recording - Auto call record included On/Off from Dr.Ketan utility
4 Way Reboot mod (stand alone Power Menu app to save power button)
5 Way Reboot mod _ Built in power menu
Launcher theme including 6 themes
Torch option in settings-Device
Torch option in quick panel toggle
ScreenShot and Torch option on power menu
S5 ToolBox
Glance View
Mute option in Sound mode.
30 Quick Panel Toggles
CSC features - Separate app for CSC features
2 PullUp mod : User can select own selectable application instead of stock. 1.Launcher swipe 2.Long Press menu (long press menu option available only if you are using Note3 styme Menu)
MultiWindow Quad view (right now max 3 window is working) + Multi Instance
Sec Launcher MOD (Hide application option + choice to select app for guesture)
Camera Hack - Use camera with Flash at low battery + Camera shutter sound toggle
Extra Lockscreen Pattern - classic/halftone/morphig/multicolor
Grey Scale power saving
App Opp Manager
Call/SMS block
Multi User
Toolbox- Preactivated Toggle and added 10 app support
Floating message
360 Rotation fixed. By default it is enabled, you can enable/disable from ROM control
No call delay option (ROM Control)
No Increasing ring tone.
Option to remove Brightness control (settings-Notification Panel)
Toolbox menu (Settings-Notification Panel)
Multiwindow tray position Lt/Rt (Settings-Multiwindow)
Memory Clean option on expanded notification with switch (Extra setting-Memory Clean view) Also Color can be set. (Extra setting-Other
Mods-color-Memory color
Mute/Vibrate/Sound option in power menu.
Smart manager from S6 PreInstalled
Advanced Messaging features
Save/Restore
1K receipent limit
Disable SMS to MMS auto conversion
Split view toggle
Increase SMS/hr
Increase Image size for MMS
Screen On on MSG Toggle
No log for SMS/Email
Priority sender
Delay sending option
Dr.Ketan Utilities
1.Toggle
Auto record Incoming call
Auto Record Outgoing call
Auto GPS (GPS will auto ON with some common app needs GPS)
Auto Wifi (Wifi will be turn off if remains disconnected for 10min)
Auto Blutooth (will be turn off if remains unpaired for 10min)
Smart Network (Mob data will be switched off after 30 sec of screen off)
Media scanner Enable/Disable
Login security - captures image with wrong password login with multi attempts.
Ad-free
2.Tasks
EFS Backup (Link only)
Data restore Fix
IntSd FIX (fix for unable to save on intSD)
Flash recovery/Kernel/Modem from intSD
AutoScan - Enable media scan only while connected to power/USB
3.ROM
Pull Chooser - Select pullup app for bottom pull and menu long press
AirWakeup
Menu Key styler : Option to select Menu key style N3 OR Note4
Toolbox app select
Teaks
Meet here - Car finder
4.Help
general info
ROM Control
360 degree rotation
Recent Panel Quick Launch (Keep App desired App shortcut on recent App)
Toggle 2G/3G
FullScreen Caller ID Enable/Disable
No Call Delay
Menu key assign Menu/Recent
Native Call record enable/disable
Custom Wallpaper for S-View
Enable LTE option (In case missing on N910C)
Enable All App in Multiwindow
Optional Features AddOn
[*]3minit battery mod.
CSC features(some features not tested)
Enable camera during call
Enable Popup Notification
Shutter sound Menu
Enable Sub Menu Symbol KB
Raise name lenth limit
Max speed dial 100
Enable call button
Enable export to SD
Message
Raise recepient limit 999
SMS to MMS threshold 999
Enable folder view
Enable font features
Enable schedule msg
Disable phone nu formatting
Phonebook digit matching
Launcher Rotation
Web exit option
Wifi client 10 for MobAP
MultiWindow addOn App
Calender export
Email White BG
Clock enable Auto on off menu
Voice call waitingtone 60
National Roaming Icon enable
Web default desktop site
Extra Settings
- Introducing ROM settings (Extra settings) which having following features. [Extra settings have Menu-Reset option. You can use it anytime if you find functions under extra settings not working. This will reset all option to default. When you open Extra settings first time, it may take little time to open to get call from SuperSU]
Toggles (switch on the fly)
Internet meter
sFinder and qConnect layout
Recent virtual Key on Lt corner statusbar
Power virtual Key Rt cornet statubar
LockScreen rotation
Long press Menu kill
Heads up Notification
List view (ONLY FOR NOTE3)
Other Mods
Signal position (Lt/Rt)
Clock stle (Rt/Center/Hide)
Week of the day (Show/Hide)
Wifi reconnect fix (set to home if disconnect repeatedly)
UPSM Fix (ONLY FOR Note3)
Color Options
Change colors for
Clock
Wifi
Data
Internet meter
Battery
Mobile signal
Airplane
Memory Cleaner
- Unlock Pattern Type
Classic
HalfTone
Morphing
MultiCoulor
- Unlock Effects
None
Abstract tiles
Geometric mosaic
Brillian cut
Stone skipping
Particle
Watercolor
Ripple
Seasonal
Spring
Summer
Autumn
Winter
- Charging effects
No effect (text only)
Seasonal
Spring
Summer
Autum
Wnter
- Dr.Ketan Sound Mod (ROM Control) with following options.
Backup
Restore
Stock
Mild boost
High boost
Custom level.- User can select custom level from 77dB to 100dB (stock level is 84dB). You needs to set (scroll) desired level from sound mod and press Apply.
Credits and Thanks :Huge Thanks and credit goes to @Phil3759 for his awesome SeLinux permissive kernel. Also a big thanks for is outstanding work for Note community.
@Chainfire - Respected elite developer for supersu and his unbelievable contribution to XDA/Android community. @wanam - Respected elite developer for his awesome contribution and references to his works. @xperiacle the amazing developer for reference to his work and tools. @gharrington for 3minit battery and QuickLaunch. @Chenglu @Phil3759 @bigbiff and all other team members for custom recoveries. @ficeto for awesome custom settings. @BSDgeek_Jake for his Ad free host.
XDA:DevDB Information
Dr.Ketan ROM, ROM for the Samsung Galaxy Note 4
Contributors
dr.ketan
ROM OS Version: 5.0.x Lollipop
ROM Firmware Required: N910F
Version Information
Status: Testing
Created 2015-05-09
Last Updated 2016-02-24
Reserved
ChangeLog L1
ChangeLog L2
ChangeLog L3
ChangeLog L3.1
ChangeLog L4
ChangeLog L5
ChangeLog L6
ChangeLog L7 - Read for 7_1
ChageLog L7_1
ChangeLog L8
Installation Instructions and Download L8 (N5 Port + S6 Edge features)
http://forum.xda-developers.com/showpost.php?p=63375826&postcount=2414
.
N910F Bootloader and Modem (Lollipop only)
N910F Bootloader and Modem (Lollipop only)
Here is Bootloader and modem from different base of N910F
First extradt to get .tar.md5 file
Flash extracted file with Odin PDA/AP tab
N910F BOC3 Bootloader Modem
N910F BOD2 Bootloader Modem
N910F POF2 Bootloader Modem
Reserved 4
Reserved 5
Reserved 6
Reserved 7
Reserved 8
Reserved 9
Last one
Sent from my SM-N910F using xda premium
yeay! will update later on today, but is there also a changelog?
Waiting for upload
ChangeLog L2
N910F BOD2 Dr.Ketan Custom ROM L2
All the features of L1 reamin same.
ChangeLog
-Based on latest built N910FXXU1BOD2_N910FFTM1BOD1_N910FXXU1BOC3
-No more required to set superSU default access to grant. Updated with lattest SuperSU 2.49 (Thanks @Chainfire )
-Memory meter/cleaner with On/Off Switch (Extra settings) It will show uses RAM percentage near brightness control bar. You can change color of background with Extra setting - Other mods - color - Memory color
-Pre modded for Multi DPI S-View cover but still you needs to use Multi DPI Installer and DPI changer from here.
Battery Saving Tips :
What I manage to save battery is to prevent wastage rather than restrict some services. Here what I do suggest is
-As soon as you enter google account Click on google account again and select cancel Sync. Now select only option which you really need to sync. In my case I don't use gmail and backup by contacts with schedule titanium backup so other than Calendar I keep sync off for all except calendar. So do it according your needs.
-Use Dr.Ketan utilityfor Auto wifi and Auto Blutooth. Which auto disable wifi and BT if it remains disconnected for certain period of time, which is very battery hungry.
-Open wifi settings - advanced - uncheck 'Always scanning'
-If not require (usually we do need high accuracy while navigation only) turn location access to Power Saving. (long press location in Quick panel to access it)
-Open Settings - Permission manager - Location - Now look for applications mentioned under this tab and think really you needs to give location permission to all these app? If you find no location permission requires for any application just open and turn off location permission.
-Again Settings-Permission manager - Device
Now look each application and turn off Auto Run option if you think that application needs not to run at every boot. Here be careful and leave it as it if you are not sure what that app/service for what.
- Use debloating tool (carefully) from AddOn section below.
Installation Instruction
Installation Instruction (MUST READ before flashing ROM)
If you are already on lollipop ROM (by OTA/Flashing LP same base ROM with Odin) you need not to flash Bootloader and Modem and straightway follow instruction below
1.Download ROM from link shown below in download.
2.You must check MD5 of downloaded ROM and it must be match with provided in download section. Always recommended to check MD5 on device itself as sometimes file can be corrupted while transferring from PC to device.
3.You must have custom recovery on device.
4.To flash ROM root is not required but if you have never backup your EFS then I strongly recommend to root your device first (If not already) then make EFS backup before flashing ROM. Though it's not required to make EFS backup every time you flash ROM but follow developer instruction and if it is recommended with particular version then you must backup again.
You can use this tool OR can get from Play store to backup EFS.
5.ROM flashing
Copy your downloaded file to device then reboot device to recovery
Select wipe data (Factory reset)
Select to Install file and navigate to your ROM file
Flash
6.It may take 8-9 min to boot keep patience.
7.READ Post #3 for Bug / Fix discussion.
If you are on Kitkat ROM and never flashed same based Lollipop ROM (Bootloader and Modem)follow Instructions below. below
Steps 1-5 remain same as above.
Now when at end of step 5 Flashing of ROM finish, Don't reboot device as it may not boot because of lacking lollipop BL and modem. Here you have to remove battery to switch off device
Now put device to download mode with Volume down+home+power (Important : don't reboot to download mode with option in recovery)
Download bootloader and modem and extract it to get tar.md5 file.
Flash extracted file with Odin PDA/AP tab.
Now Reboot device
Goodluck !
Download
DON'T FORGET TO READ ADDON & BUG FIX SECTION (AT END OF THIS POST) BEFORE FLASHING ROM.
DrKetanROM.com MUST READ SHEALTH SPO2 FIX AT END OF THIS POST.
MD5 :2967CE5E512E8B1D2C11B9622579B8D6
AddOn and Bug Fix - Download required files and flash from recovery (You must be on Dr.Ketan ROM)
- Lite version of L2
Goggle Map FC can be solved by updating from Play store and reboot.
- 3minit Battery mod - Flash using CWM - Here is FIX for 3minit battery setting expiration message.
- AOSP Style Toggles - Flash using CWM
- Debloating Tool
-Launcher Home grid 5x5 with hotseat 6 - Flash using CWM
- Viper Audio Mode To use this mode you must have custom kernel (SELinux Permissive)
Multi DPI Mode REMEMBER Multi DPI for S-View Included in ROM and you need not to Install it.
-Air View (PEN only)
-Stock boot animation
- SHealth SPo2 bug FIX
L2 screenshots
This mod makes me amazed doc.. Would u mind creating for N910H??
Welly_11 said:
This mod makes me amazed doc.. Would u mind creating for N910H??
Click to expand...
Click to collapse
Same ROM available for N910C/H except minimal changes.
http://forum.xda-developers.com/note-4/development/n901c-dr-ketan-custom-rom-t2944354
.
N910F BOD2 Dr.Ketan ROM L2 is Online now
http://DrKetanRom.com
.
I'm on BOC4 Modem and BOC5 Build, do i have to flash a diffarent Modem or Bootloader?
MultiCulti said:
I'm on BOC4 Modem and BOC5 Build, do i have to flash a diffarent Modem or Bootloader?
Click to expand...
Click to collapse
If device doesn't boot after flashing rom then you need it. On n910g bod2 there is must to flash same base bootloader and modem. Usually device just go to bootloop with vibration that highly suggest you needs to update bootloader.
Sent from my SM-N910G using xda premium
N9208 Dr.Ketan ROM Deodexed I DeKnoxed I MultiDPI*
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS ROM IS MERGED WITH N920I INTERNATIONAL ROM and you will find guide in next post about how to use my other internation ROM on N9208.
.
XDA:DevDB Information
Dr.Ketan ROM, ROM for the Samsung Galaxy Note 5
Contributors
dr.ketan
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Stable
Created 2015-11-05
Last Updated 2016-01-11
How to use International N920I ROM on N9208
1.Download Dr.Ketan N920I International ROM
2. Download Conversion Tool by @ravian29
3.Download N9208_SystemUI
4.Download custom kernel for N9208. (If you already have it then skip this)
5.Flash the N920I ROM as per instruction on that thread. (Skip selecting kernel from aroma)
6.Don't reboot device and Flash conversion tool (said in step 2)
7.Flash N9208 System UI (said in step 3)
Reboot device now.
.
Reserved 2
Reserved 3
Reserved 4
Reserved 5
Reserved 6
reserved 7
Earlier discontinued version
ChangeLog L1 - Initial version
Installation Guide & Download N9208 Dr.Ketan ROM L1
http://forum.xda-developers.com/showpost.php?p=63666400&postcount=14
Click to expand...
Click to collapse
.
Last.
Thanks for your support doc.
Thanks Doc, has this new rom been applied audio fixed for Note 5 korean version? cant wait to flash on my Note now
winbytrick said:
Thanks Doc, has this new rom been applied audio fixed for Note 5 korean version? cant wait to flash on my Note now
Click to expand...
Click to collapse
This is based on N9208 so there shouldn't be any issue on N9208. Regarding other variant you can try and report here.
ROM Features Installation and download L1
Based on N9208XXU2AOJ5_N9208OLB2AOJ3_N9208XXU2AOJ2
ROM Features
Inbuilt features
- 300 fonts enabled
- All Language enabled
- Multi DPI. (No S-view support) - Right now not all app moded as well this mod is in beta stage and some glitches expected. Launcher is moded for no DPI and camera not fully.
- Ad Free (you can disable from Dr.Ketan Utility)
- Auto Call Recording - Auto call record included On/Off from Dr.Ketan utility
- Manual Call Record - ROM Control - Native call record
- Power Menu -5 Way Reboot mod with sound mode
- 22 Quick Panel Toggles (Floating Msg won't work)
- CSC features - Separate app for CSC features
- All App Multi Window (optional in ROM Control)
- Camera Hack - Use camera with Flash at low battery + Camera shutter sound toggle
- Call/SMS block
- Floating Msg
- Safe media volume warning disabled
- No Increasing ring tone. (Extra Settings- Other mods)
- Memory Clean option on expanded notification with switch (Extra setting-Memory Clean view) Also Color can be set. (Extra setting-Other Mods-color-Memory color
- Mute/Vibrate/Sound option in power menu.
- NFC hack with screen off (ROM Control)
-.Appoops (permission manager) Settings-LockScreen and security - Application permission
- No call delay mode (preactivated)
- Center clock option (Aroma)
- Sound boost (separate app in ROM)
- 3minit battery (Aroma)
- Advanced Messaging features
Split view toggle
Priority sender
Delay sending option
No SMS to MMS conversion
Backup/Restore option
Scheduled message
-New lock screen unlock effects (Dr.Ketan Utility)
Circle
Stone keeping
- Dr.Ketan Utilities
1.Toggle
Auto record Incoming call
Auto Record Outgoing call
Auto GPS (GPS will auto ON with some common app needs GPS)
Auto Wifi (Wifi will be turn off if remains disconnected for 10min)
Auto Blutooth (will be turn off if remains unpaired for 10min)
Smart Network (Mob data will be switched off after 30 sec of screen off)
Media scanner Enable/Disable
Login security - captures image with wrong password login with multi attempts.
Ad-free
2.Tasks
EFS Backup (will be available in next version)
IntSd FIX (fix for unable to save on intSD)
Flash recovery/Kernel/Modem from intSD
AutoScan - Enable media scan only while connected to power/USB
3.ROM
LockScreen unlock effect Particle/Stone keeping/Circle)
Meet here - Car finder
4.Help
general info
- ROM Control
NFC hack
Recent Panel Quick Launch (Keep App desired App shortcut on recent App)
Menu key assign Menu/Recent (If you select this option then you may use Virtual key for Multiwindow & Recents)
Native Call record enable/disable
Enable LTE option (In case missing on N910C)
Enable All App in Multiwindow
PlayService Fix - If you find battery consumption or too much wakelock with google play services then you can apply Fix from ROM Control N5 - PlayService Fix (Tap on it to turm ON) Once you turn it On, it will apply fix on every boot. You can turn Off fix anytime from ROM control. (Long press to turn Off)
Secret Code dialer - Read below
- Extra Settings
Toggle bluetooth icon on statusbar. You can decide to keep persistent BT icon on SB or not.
Heads up Notification
Fast Charging
Popup blocker (Not sure exactly what popup blocks but should block some miscelaaneuous popup related to location,Battery etc)
TotchLight with Long pressing volume while screen off
Toggles (switch on the fly) - 1.Increasing Ring tone 2. Network Meter 3. Memory View
Color Option - 1.Internet meter 2.Memory view
- Virtual key
How to use virtual key :
Open Virtual key - Tap on Right/Left/Center button to enable corresponding virtual keys. (long press to disable)
To assign keys- scroll selected action from tab and tap on selected item to set (message will be displayed on successful assign)
Now long press bottom corner of screen to perform selected (assigned) action.
Each key have following options to assign
None
Browser
Calendar
Contact
Home
Menu
OK Google
Power (Long Press power action)
Recent
Search
Sleep (Power button to turn off screen)
Screenshot
S-Voice
Sattelite view
Multiwindow
Battery
- CSC features(some features not tested)
Enable camera during call
Enable Popup Notification
Shutter sound Menu
Enable Sub Menu Symbol KB
Raise name lenth limit
Max speed dial 100
Enable call button
Enable export to SD
Message
Raise recepient limit 999
SMS to MMS threshold 999
Enable folder view
Enable font features
Enable schedule msg
Disable phone nu formatting
Phonebook digit matching
Launcher Rotation
Web exit option
Wifi client 10 for MobAP
MultiWindow addOn App
Calender export
Email White BG
Clock enable Auto on off menu
Voice call waitingtone 60
National Roaming Icon enable
Web default desktop site
- S6 edge plus features People edge and App edge fully ported.
Alert on pickup if missed notification, Doze screen notification, Cocktail notification of edge people.
- 30 QS Toggles - ROM default will have 22 Toggles but there is option in Extra Setting to enable all 30 Toggles.
- Srollable Toggles - Stock allowing to add maximum 10 toggles to scroll. There is option in Extra settings to make 10-30 Toggles scrollable. (requires reboot)
- Email Security hack
- SideKey - N4 side key panel working (No option to edit)
- Toolbox - S5 Toolbox with ability to edit upto 12 application.
There are multiple ways to enable Toolbox and SideKey
1.You can enable 30 toggles which have both toggles
2.There is separate application available 'Toolbox Sidekey' in ROM which have option to enable both application separately as well you can edit Toolbox app.
3.One more facility included in Toolbox Sidekey application is shake to enable/Disable Toolbox/Sidekey/Both
Once you enable this option you can just shake device Lt to Rt while display is ON to toggle Toolbox/SideKey/Both depending on your selection.
- Swipe Up mode - Instead of opening Briefing you will have choice to open your desired app with Rt swipe launcher. Still you can select briefing app from swipe up mod to keep stock settings. There is Swipe reset available in app drawer to reset your choice. Thank and credit to @daxgirl for swipeup chooser.
- Double Tap home customization added to ROM Control. You can have now lot choice to select with double tapping home instead of camera only. Option added to ROM control. There is option available to activate custom action for double tapping home (reboot requires once when you change this option Camera/Custom). Indeed now double tap will open up @xperiacle 's SwipeUp chooser.
Once you activate custom selection there is option to define custom action. You can change anytime this action without requiring reboot.
- SecretCode Dialer - As it is common issue of broken MMI code. So in case secret code is not working with regular dialer here option added to ROM Control.
You have to select 'Type code here' this will open popup box and you have to enter code there which you want to dial but without prefix *# OR Suffix #
For example you want to dial *#06# then you need to simple input 06 same way if you want to dial *#0*# then you need to input 0* only.after than check and apply. Also there is 62 examples available for different codes (Not tested all)
- Three kernels included in ROM zip are N9208 OJ5, N920C OJ5 and N920G OJ5.BUT you have to use only N9208 if you want stock enforcing kernel. By default it won't install any kernel unless you choose one. All kernels are stock SeLinux Enforcing. To keep your existing kernel just don't select anything in kernel section.
Installation Instructions.
[ ROM have stock kernel reported working fine on N9208, you need to just select from aroma if you want to flash it]
ROM reported working fine with N920C Dual SIM using this kernel
Important : All users requested to make EFS backup if you are already rooted device. Otherwise make backup as soon as you root device.
1.You must be having custom recovery to flash this ROM. You can use TWRP/Philz CWM according your choice.
How to flash custom recovery?
First go to setting-about device-software info and tap 7 times on build number
now look to setting and you will find developer option just above about device.
Enable OEM unlock
Switch off device
Reboot to download mode (Vol up+power+home)
Select downloaded above said Philz recovery with AP tab of Odin and flash.
Reboot to recovery and now you should have custom recovery.
In case still you have stock recovery then follow this
Again reboot to download mode
Select recovery file with AP tab of Odin
Now uncheck Auto reboot option
Flash selected file
Once flashing complete, disconnect device and long press Vol down+Power
Once screen turns off, immediately press vol up+power+home to reboot to recovery manually.
Now you have custom recovery and proceed to flash RO)M.
2. ROM Aroma have stock SeLinux Enforcing kernel and may not work on Other than N920I variant. Aroma will flash stock kernel only if you select it from aroma. If you don't select kernel option then it will keep your existing kernel.There are some custom kernel available in development formu simply find which suits you best. If you want to flash custom kernel,download custom kernel and copy to device.
3 Download N920I Dr.Ketan ROM L* (Link below) and copy zip file to Device.
5.Installation :
-Reboot device to Recovery
-Select Wipe option - Factory reset
-Select N920I Dr.Ketan ROM zip
-This will start calculating md5, wait till it finish and match MD5 with download page of ROM. Once it match - select 'yes' to flash ROM.
-Now this will start AROMA wizard and you have to select stuff you requires.
-If you have selected Stock Kernel OR If you want to keep existing cusatom kernel then just reboot device and skip steps a and b said below.
-a.Once ROM flashing finish - DON'T REBOOT Device but again select to Install file
-b. Select Kernel file you have copied (If you are already on custom kernel, this step can be skipped)
VERY IMPORTANT : AT THE END OF AROMA WHEN ROM FLASHING FINISH, SELECT FINISH WITHOUT CHECK MARK REBOOT NOW OPTION. (BY DEFAULT IT IS DISABLED) ONCE YOU BACK TO CWM RECOVERY - SELECT REBOOT OPTION FROM THERE.
In case device stuck to first screen (samsung logo + Red notice text on Rt corner) - Force reboot to recovery and re run aroma, skip everything except select Flash stock kernel. OR In case you are using custom kernel then instead of aroma, simply flash your kernel
Bootloader and Modem OJ5 for N9208 L1 :
Flashing OJ5 bootlkoader and modem is optional. If you want to flash - Download N9208_OJ5_Bootloader_modem - Extract to get tar.md5 file. Flash extracted file with AP/PDA tab of Odin.
Now reboot device and keep patience for 5-6 minute to boot device.
Download
DrKetanROM.com
Posting/Redistributing/Including any part/mode/file(s) of this ROM in other ROM /Mods/Projects is strictly prohibited.
Bug & Fix
Add On
-Encryption Fix - There is known issue to use encryption on rooted device. Use this fix to encrypt Dr.Ketan ROM.
- Enable Multiuser
- How to use Viper Audio mode with stock enforcing kernel
How to use Xposed module - updating soon
1.Download XposedInstaller_3.0_alpha4.apk. Thank and credit @rovo89
2.Install above downloaded application as regular apk.
3.Download xposed-v***-sdk22-tw-arm64-custom-build-by-wanam-20151026.zip by @wanam from original Thread here
PS : There will be two version, you have to select with one having arm 64 in file name.
4.Reboot to recovery and flash above downloaded zip from recovery.
N9208 Dr.Ketan ROM L1 in online now.
.
Hi, Dr.ketan,
From Note 3 to Note 4, I flashed Dr.Keten ROM every version.
I am very glad to hear Dr.Ketan ROM support N9208. Thank you very much.
During installation of rom (no kernel, no recovery, no add-ons), after 30% of install I get message 'some symlinks failed' and then 'Installer status : 7'
No rom was installed.
Any ideas?
(N9208 with TWRP 2.8.7.0)
daffie said:
During installation of rom (no kernel, no recovery, no add-ons), after 30% of install I get message 'some symlinks failed' and then 'Installer status : 7'
No rom was installed.
Any ideas?
(N9208 with TWRP 2.8.7.0)
Click to expand...
Click to collapse
1.may be corrupt Download - check md5
2.recovery issue. - Try changing recovery
dr.ketan said:
1.may be corrupt Download - check md5
2.recovery issue. - Try changing recovery
Click to expand...
Click to collapse
Apologies, apparently Mount was set to 'only mount system read-only'. After disabling this option, the rom installed just fine
Thanks.
thanks doc. 1 quest. does this rom debloated btw?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey guys! You may ask yourself what this rom is about and what you can expect from it, so it's basically something similar to the SuperMan-Rom on the Galaxy S7/S7 edge! It has many custom featuers, but you will find it below in the feature list :thumbup:
As you maybe know I'm a little fanboy from samsung, means I really love the stock look of the UI and the rom will always be based on most recent version from samsung, current base used is G955FXXU1CRC7 (compatible with S8 and S8+)
I wish you much fun reading through the features and while using this rom! Enjoy
So this rom should be installed by anyone loving to use a rom close to stock BUT with many mods inside aroma/rom control.
Also I'd like to make the already fast galaxy s8 even more faster as it already is! Let's see if we can reach this goal
Nobody is allowed to take stuff from my rom without asking me! Thank you.
IF YOU FOLLOW MY STEPS BELOW, YOU WILL MAY LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
Rom features of V2.0.0 Oreo:
- Based on latest G955FXXU1CRC7 Nougat base
- Prerooted with SuperSU V2.82 SR5 or MagiskSU (choose in aroma)
- Magisk V16.3 (aroma selectable)
- Latest Busybox installed (aroma selectable)
- Aroma installer! with support up to 4GB zip files
- CSC features can be choosen and installed in aroma (such as Applock, Floating Message, Call recording and more!)
- Adblocker enabled or disabled (choose in aroma)
- Full rom control!! App name is BatMan Settings Free
- Fully deodexed (framework can be chosen odex/deodex in aroma)
- Rom informations and logo inside settings
- LED indicator settings
- choose IOS or stock emojis in aroma
- DM-Verity disabled
- Force encrypt disabled
- ADB fully working
- Modded SystemUI with many tweaks in the BatControl app (like header colors, qs colors and notification colors)
- 3Minit Clock/battery in romcontrol
- Custom clock positions and customizations in romcontrol
- USB Plug/Unplug disable wake up
- Remove high volume warning for headphones
- Torch on lockscreen
- Knox stuff can be choosen in aroma
- Stock CRC7 Kernel or BatStock-Kernel(choose in aroma)
- Based off from latest touchwiz source available at this moment
- Many apps are selectable in aroma debloat menu
- Selinux permissive on custom kernel
- Ram bar in recents
- Matrix animation in recents
- Sound Mod with lot improvements! (choose in aroma)
- Latest March Security Patch
- Many other features, can't list them all, please read changelog to see what changed over the time
How to install the rom:
For advanced users:
0. Make sure to have a backup somewhere on external storage
1. Make sure to be on most recent TWRP, bootloader and modem
2. Flash the rom
3. If you need VoLTE or Wifi Calling, flash your correct carrier CSC
4. Done
For normal users:
0. Boot your phone, enable OEM unlock in developer settings
1. Flash TWRP with Odin (if you don't have odin, download it here), following this thread S8/S8+ TWRP until it works correctly (to access download mode, press bixby+volume down+power on while phone is turned off) (YOU HAVE TO BE ON 3.1.1-2 TWRP OR HIGHER TO SUPPOR THIS ROM)
2. Make sure you are using most recent bootloader and modem, latest one available here on Android File Host (You should have at least an Oreo bootloader/modem installed)
3. Now boot into TWRP by pressing bixby+volume up+power on while phone is turned off
4. If TWRP asks you about allowing system to be edited, swipe yes to confirm
5. In TWRP, go to wipe, format data (a keyboard will pop up now), type "yes" (this will wipe all your data, make sure to have a backup!)
6. After this, reboot recovery and start the rom installer
7. Select your preferences in my aroma installer
8. If you selected to auto update bootloader in aroma, the installer will reboot automatically
9. You can still install my CSC selection if you are customer of a carrier which is not supported by default CSC inside the rom
10. Wait till the rom boots up
11. After setting up, open BatMan Settings Free and let the app apply my default settings!
12. Enjoy the rom!
Downloads for SM-G95XF/FD/N:
V2.0.0 Final on Android File Host
Download via our Server (you need to be signed in)
Bootloader/Modems SM-G95XF/FD/N
CSC Selection V1.2.5
Useful Links:
Our new Grifo Development website
Telegram BatMan News Channel
Telegram BatMan-Rom Chat
Telegram Dark Knight Theme
Known Bugs:
- Knox related features such as secure folder, samsung pay or samsung pass may not work any longer after rooting your phone
Credits:
- Samsung for the base
- SuperR for his awesome Kitchen
- Chainfire for his SuperSU
- topjohnwu for systemless Magisk V12
- amarullz for aroma and nkk71 to make it compatible with bigger zip files
- wubydax and daxgirl for basic RomControl
- myellow for all the great animations!
- TheFreak for his work as designer and his help with the website
- mwilky for his fingerprint after reboot mod, the colors control and other mods
- Asc1977 for a few mods I already used on SuperMan
Support:
If you enjoy this I would be really lucky if you would hit thanks :victory:
And if you really really like it, here is a donation link
:good:
PayPal
BM Settings App on PlayStore
XDA:DevDB Information
BatMan-Rom SM-G95XF, ROM for the Samsung Galaxy S8
Contributors
Tkkg1994
Source Code: https://gitlab.com/Tkkg1994/BatMan-Rom
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Custom TWRP Recovery
Based On: Stock Based
Version Information
Status: Stable
Current Stable Version: V2.0.0
Stable Release Date: 2018-05-04
Created 2017-07-14
Last Updated 2018-05-25
Changelog:
BatMan-Rom V1.0.0
- Initial Release on XDA
BatMan-Rom V1.1.1
- Rebased on latest AQF7 release
- June security patch
- Fixed the gap in pulldown menu
- readded private mode(thanks to @mwilky for finding the right mount points for private mode! )
- added a switch in RC for immersive mode
- updated csc to AQF7
- added a switch for wake the device with the volume buttons
- fake system status to official
- removed camera mod, it didn't work anyway
- updated magisk to latest v13.1
- updated all kernels with AQF7 base
- updated supersu to v2.82 sr1
- made the rom compatible with s7/s7e edge devices
- added an option to control icon colors/progress bars etc
- added a custom music apk to be colored (thanks to @Therassaad)
- many more things, check out the rom
BatMan-Rom V1.2.0
- Rebased on latest AQGB release (I know AQH3 is out, but until samsung releases a new kernel source it normally takes a few weeks that's why this base is used for now)
- July security patch
- Added navbar icon colors @mwilky
- Added navbar to get colors from statusbar (as long as the app doesn't set a default color) @mwilky
- Added in "misc" batman settings to disable touchkey light (s7 only of course)
- Readded custom color selection for navbar in stock settings
- Removed a few camera mods which weren't working
- Updated CSC to AQGB, also added all CSC in OMX (including BTU)
- Updated all Kernels to latest source and ramdisk
- Updated SuperSU to 2.82 SR3
- Added a the S Power Planning feature (forward ported from galaxy j7 prime), choosable in aroma as a csc mod
- Updated OperaMax apk to not show as chinese apk, many people meant it's a trojan lol
- Updated adblocker host file
- Updated all included modems and bootloaders
- Added a stock kernel even for the s7, so you can choose stock there as well!
- Updated Magisk to latest V13.5 beta version
- Added modded camera into aroma @zeroprobe
- Added 100+ fonts apk into aroma
- Updated busybox to most recent version
- Updated dual speaker mod to most recent version
- Added VoLTE and wificalling into pulldown menu
- Reduced download size to 3GB only (hahahaha only 3GB )
BatMan-Rom V1.3.0
- Rebased on most recent AQH3 firmware update
- August security patch
- Added navbar height tweak @mwilky
- Added force expand notifications @thereassaad
- Updated all kernels to most recent source drop and linux version
- Updated magisk to V13.6
- Updated SuperSU to V2.82 SR3
- Added batman gif animations
- Fixed gif overlapping device informations
- Readded autostart manager in modded settings
- To disable the volume warning, there is now a switch in notification panel options to enable/disable it
- Fixed long press back not bringing up menu @mwilky )
- Removed OTA Updater. This services is outdated and not working anymore.
- Readded touchwiz double tab features! Double tap anywhere on launcher to do custom actions (the only thing which does not work yet is starting the torch light)
- Updated samsung music to most recent version with all the custom mods thanks to @thereassaad
- Fixed next alarm on lockscreen showing the wifi icon
- Fixed heads up display not working when switching in RC
- Added a new custom signal icon
- Edge lightning can now be customized! Choose a custom color OR if it should take the color from the app itself!
- Added alarm volume control to sound
- Fixed adaway app not being installed even if you selected adblocker
- Removed viper mods, since they can easy be outdated it's better to keep them outside. I hope people will go and visit the threads of the sound mods
- Updated included bootloader and modem to most recent version
- Updated csc to AQH3
- Added many new CSC mods, BUT BE AWARE, 5 SIGNAL in statusbar kills Wifi-Calling/VoLTE!
- Removed the last not working camera mod: video collage!
- Maybe some more things I already forgot, have fun!
BatMan-Rom V1.4.0
- Rebased on most recent AQI7 firmware update
- August security patch (there is no single september security patch released by samsung)
- This base fixes blueborne problems (which was samsungs main goal)
- Updated all kernels to most recent source drop and linux version (AQI7 for S8 and DQIC for S7)
- Updated magisk to V14.2
- Updated SuperSU to V2.82 SR5
- Added memory cleaner next to brightness slider
- Added listview animations thanks to @asc1977!
- Added a new telephony icon to romcontrol
- Added quickunlock thanks to @mwilky and @Grouxho
- Added Xposed V88.1 for magisk, why only magisk? Stock xposed can't be installed via an aroma script to-date, hoping rovo will change this in the future
- Updated all busybox to latest 1.27.1
- Updated adblocker
- Fixed lags in notification panel, for custom edge lightning you simply need to update the edge lightning service with samsung store!
- Fixed USB wakeup switch not working
- Updated launcher to support gestures even with latest update
- Updated included bootloader/modems for F/FD models
- Maybe some more things I already forgot again
BatMan-Rom V1.5.0
- Rebased on most recent AQK7 firmware update
- November Security patch included
- This base fixes krack problems (krack explained: Krack)
- Updated all kernels (AQK7)
- Updated Magisk to V14.5
- Updated Xposed to 88.2 (magisk version, aroma choosable)
- Updated Xposed Installer to 3.4
- Updated adblocker host file
- Updated bootloader/modem to AQK7
- Updated zeroprobes camera mod
- Stock camera does now only feature stock camera mods, for advanced camera mods please use the modded app (which includes almost all modes)
- Fix notification background image not sticking after a reboot
- Fix carrier label on pulldown overlapping with navbar
- Fix lag on pulldown, introduced by force expand notifications. THIS MOD HAS BEEN COMPLETELY KILLED
- Add qs panel number counts to romcontrol
- Removed most google apps from debloater, why: the zip file increases all the time, you can download the apps easily via playstore, also you have them installed as user apps then
- Add modded youtube to play background videos and watch videos without ads
- Add modded GBWhatsApp and GBInstagram thanks to the GB team!
- Moved some more bloatware related to Gear VR into Gear folder
- Added "edge panel" to debloat menu
- Update update-binary
- Added googles web view by default, so we don't need google chrome
- Busybox installer updated
BatMan-Rom V2.0.0 Final:
- Updated to CRC7 base (March update). I'm aware that CRD7 is out, but I already finished this base update while the other one rolled out...
- Reworked most mods from Nougat to Oreo, some are new, some I had to leave behind. You'll find out when visiting the romcontrol app
- Included an aroma choice to flash with odex or deodex framework (this is the ONLY change compared to the beta release). If you don't know anything about the odex/deodex issue, I suggest you to read up on that a bit! I talked a lot about it in here
- Updated magisk to latest 16.3 (16.4 magisk is causing issues sometimes)
- Updated included BL/CP to CRC7
- Updated modded camera
- Updated dual speaker sound mod
- Updated busybox
- Updated GBinstagram/GBwhatsapp
- Updated modded youtube
- Updated xposed to latest Oreo beta
- Updated modded samsung music app (thanks to @thereassaad )
- Updated all included kernels to CRC7 base
- Many thanks to @asc1977 and @mwilky who have helped me so much to get this update done! Without them this wouldn't have been possible with all those mods!
Useful posts and links
App on PlayStore:
Find my own BatMan app on PlayStore: BM Settings App
Odin:
Find all latest odin and samsung tools on this link: Samsung-Tools
TWRP links:
TWRP S8+ Thread
Official TWRP website for S8+
Bootloader and Modems:
SM-G955F/FD/N BL and CP (all models in one folder!)
SM-G955F/FD BL and CP
SM-G955N BL and CP
Magisk related Threads:
Magisk V13.2
Magisk Discussion
How-To create a Magisk module
Phh magiks superuser
Magisk module collection
Root related Threads:
Phh's superuser
Phh's hidesu
Phh's official apk
Phh's material APK
Stable SuperSU releases
Beta SuperSU releases
Chainfires suhide
Kernels Threads:
BatStock-Kernel
Notorious Kernel
Roms made by me:
BatMan-Rom which you are currently on its thread
BatStock-Rom which is as close to stock as possible with some nice additions.
Samsung Links:
Sammobile Website
Latest samsung apks
Samsung Opensource Center
Live samsung updates
Fast firmware downloads
Thread about CSC:
Download latest CSC from CSC Selection V1.0
All CSC's ever released
How to donate:
Donate via PayPal.me
Donation via normal PayPal
Questions and Answers
Basic Questions:
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: My Phone is stuck at boot and doesn't start, what to do??
A: Update your bootloader, modem and TWRP recovery. Also make sure you have made a fresh install of the rom. Bootloader and Modem can be found in the OP. Another problem can be that you are didn't decrypt your phone. To fix this read below how to disable encryption.
Q: Do I need to update bootloader and modem after every update?
A: It's recommend to update your bootloader and modem everytime there is a new base yes. The developer will tell you if necessary on every rom changelog.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get verification FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G95XF/FD/N. Snapdragons are NOT supported
Q: Is this rom working on Snapdragon 835 variants?
A: No, sadly not.
Q: I want to change something in my rom setup, how can I do that?
A: Simply reflash the same rom version without any wipe and than choose the correct things you want.
Q: Some features are not present in this rom, but they are on stock rom, so where are they?
A: In aroma installer you have the option to select bloat you want to install or not, you probably didn't select all package, this is why it's missing now.
Q: After a clean install my phone is overblated with many custom settings. What to do?
A: Open my romcontrol, grant it root permissions and then my default settings will be applied.
Q: Will you add X or Y feature?
A: You can kindly ask in the thread for that, if I like your suggestion I will think about adding it to the rom.
Q: You said you fixed SD card RW but Titanium Backup can't write to external SD card, why???
A: This is because of googles changes concerning SD card, to fix this open Titanium Backup, Menu, Preferences, Backup Folder Location, Storage provider and than hit DocumentProvider Storage and select your SD card. Problem solved
Q: I can't find X and Y mod. Please help
A: I've added many links and useful stuff to this post here. Hope that's what you have been looking for!
Q: I want to have my external storage like an internal as well. Google introduced it with android Marshmallow, but I can't see this option?
A: Just follow this Guide here and you can setup your SD card as normal storage
Q: I got a new strange icon (like a cloud) appearing after nougat update. What's that?
A: This is a new advanced calling feature introduced in android nougat. Should make your call quality better or something like this. To hide it please visit following forum: Get rid of RCS icon
Q: I installed Viper or other sound mods, but they won't work, why?
A: You most likely missed to freeze sound alive, if you did this and it's still not working you it's due to the kernel. Stock kernel doesn't support these mods since we need a permissive kernel!
Questions concerning rom updates:
Q: Do I have to do a full wipe for the new version?
A: It is always the best option to make a clean install, otherwise please don't come and report bugs!
Q: But I don't want to make a full wipe when only small stuff changed!
A: For updates using the same bases you can install the rom with a dirty flash. BUT with a new base a clean install is highly recommend!
Q: What steps should I do to update to a new version with a full wipe but keep all data?
A: There are some different ways. One way is to make a backup with Titanium Backup, you can backup all Apps and Preferences there. Make sure to store this backup on external SD card (if you have one). Second way would be to save your data onto a google account or samsung cloud and restore it after a clean install.
Q: I miss an apk after rom update, how can I get it back?
A: Simply reflash rom and select "dirty flash" in aroma + select the app this time in aroma.
Q: My battery life is so bad and performance is very poor after an update!?!?
A: This comes actually not form the rom itself, dirty flash can cause problems even if only some small things have been changed. So simply install it clean again and it will solve your problem.
Questions about log and logcats:
Q: I got FC's and other Problems with the rom, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grabed with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening. Same can be done if you have a terminal installed on your phone. Simply type adb logcat > log.txt and you will have the same output as on the PC.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
You can also send me a log created by your phones terminal with the exact same commands!
Questions about RomControl:
Q: None of my romcontrol changes do anything, why are you such a bad dev!?!?
A: The problem is not on my end, you installed stock systemUI (which is STOCK and does not support one single mod). Use another one in aroma instead. The same thing can happen with good lock!
Q: Romcontrol gives FC's to me. HELP!
A: Very simple answer here: wipe data and cache from batman control application. Also make sure storage permissions are given to the romcontrol.
Q: Romcontrol still FC after cleaning data and cache!
A: Make sure you allow storage permission in main settings.
Q: I try to backup my current RomControl setup, but it won't work?
A: It works. Just make sure to enable storage permission in main samsung applicatoin settings. You will find it in internal sdcard under RomControl folder.
Q: I can't restore BatMan control settings after a clean base update, why?
A: Backup for BatMan control only works as long as you use the same version of the app, I mostly change very much things in new releases that's why it won't work there.
Q: SystemUI reboot doesn't work in BatMan settings app, why?
A: Since Nougat update, you need to install busybox in order to get this button working. Without busybox the button will just do nothing.
How to go back to stock:
Q: I like to go back to stock rom, how is this possible?
A: I can provide you here all steps which are needed to go back to a full stock rom.
0. Make a backup and than wipe all partitions in TWRP
1. Go to Sammobile and choose your country
2. Download the file and the attached Odin on sammobile
3. After downloading, put your phone into download mode
4. Make sure drivers are installed and your pc can detect your phone in odin
5. If the box in odin turns blue, add the AP file to AP tab, BL file to BL tab, CP file to CP tab and CSC_HOME to CSC tab
6. Hit start and wait until it is finished.
7. Reboot and you have a stock rom again
Questions about Encryption:
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the steps below to get rid of your encryption.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 of my rom instructions it tells you to be sure you're not. So, what do you need to to in case you are still encrypted.
A: HOW TO DISABLE ENCRYPTION:
1. Boot into TWRP
2. Select Wipe
3. Select format data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: And if I want to use this rom with encryption?
A: Encryption does not work anymore on Nougat roms with TWRP installed, sorry to tell...
Questions about CSC/Signal:
Q: Where has the CSC selection gone?
A: To include all csc files, the rom get way to big, so it got it's own thread now, take a look here: CSC installer
Q: I have a weak cellular signal, what can I do against it?
A: Two things: first, install your providers CSC using CSC installer and flash in TWRP or flashing stock CSC with Odin. Second Thing: You can install the modem from your provider, also find your modem on Sammobile and install it with Odin in CP tab.
Q: I don't have all sHealth features, how come?
A: Not all CSCs include this feature. I recommend to use AUT or DBT as it has the best compatibility!
Q: Can I flash MM CSC on N and vis a verse?
A: No, this is clearly not recommend! You can and will face call fc's!
Questions about Xposed:
Q: Does Xposed work yet on Android N 7.0?
A: There are some test version of Xposed on N, I don't recomend to install it!
Questions about Magisk:
Q: How can I pass safetynet?
A: 1. Make sure to fully uninstall SuperSU by chainfire
2. Flash most recent BatStock Kernel
3. Flash Magisk V13.3
4. Open Magiks Manager, go to settings
5. Enable MagiskHide, systemless hosts and systemless busybox
6. Reboot the phone and check safetynet!
Q: Where can I configure the root settings in Magisk?
A: Since Magisk V11.1 Magisk uses MagiskSU, you can find it in latest Magisk Manager V4.1
Questions about Snapchat:
Q: What to do when I can't login to snapchat?
A: Clean install the rom without root and login to your snapchat, save the app with titanium backup, flash back root. For the next update of the rom just restore snapchat backup in TB.
Q: Any other possibility?
A: You could enable MagiskHide and check Snapchat inside it so root will be hidden from Snapchat. You will be able to perfectly login without any issues.
Questions about Kernels:
Q: I want to switch kernel, how?
A: We have systemless we have patches in ramdisk of boot.img. This means you have to reflash Magisk and supersu (or any other zip that changes some stuff in ramdisk partition) after every change of kernel!
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Hey guys, this isn't anything new, I just moved the BatMan thread into the criss cross development section as it's way more active in here :fingers-crossed: :good:
How can i delete these green android icons? Delete not make them invisible
Gesendet von meinem SM-G950F mit Tapatalk
Hi
Animated scale for french langage is possible To 0,25 ?
Thanks
what about s8 forum i find here only s8+
Sent from my SM-G950F using XDA-Developers Legacy app
spackeddie01 said:
How can i delete these green android icons? Delete not make them invisible
Gesendet von meinem SM-G950F mit Tapatalk
Click to expand...
Click to collapse
Are you using a custom launcher? I assume it's due to this one!
ounerkouks said:
Hi
Animated scale for french langage is possible To 0,25 ?
Thanks
Click to expand...
Click to collapse
English, spanish, german, french and dutch should it be if I'm correct
sielhadi said:
what about s8 forum i find here only s8+
Sent from my SM-G950F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Look at the thread title, it says G95XF, which means G950F and G955F. I moved all my threads into s8/s8+ combined ones
i bought the super setting pro does it adequate with bat setting pro when it will be released
Sent from my SM-G950F using XDA-Developers Legacy app
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
---------- Post added at 02:30 AM ---------- Previous post was at 02:30 AM ----------
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
Hi,
Its my first root experience with the s8.
I love the rom.
However, I am unable to control the bixby button. I try to modify it behavior with bxActions or similar but nothing happens.
Is it depend on some of the Samsung apps? If so, which one (or is it possible to just have it working)
Sent from my SM-G950F using Tapatalk
Hi folks, i flashed Dolby atmos in aroma, but if i try to open the app, the process stop working. Viper works fine. Is there a fix?
Sent from my SM-G950F using XDA-Developers Legacy app
tiesto14 said:
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
---------- Post added at 02:30 AM ---------- Previous post was at 02:30 AM ----------
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
Click to expand...
Click to collapse
you can find it in advanced settings
Palm Swipe to Capture not working!
Hi there!
I am currently running BatMan-ROM V1.1.1 and kernel version (4.4.13), I'm not sure if that's your kernel or the stock one because I don't remember the aroma choice I made.
I have tried disabling and re-enabling all the advanced features but palm swipe to capture screen still won't work. Any idea as to why that is happening? It's not a big deal but I find that feature useful sometimes, however if it's a hassle I can certainly live without it.
Thanks a lot, Tkkg!
hi, This icon from statusbar would be nice changed with AOSP style.
So recently did a clean install for V1.1.1 since I first did a dirty flash and I noticed my battery draining quicker then it did before. But even with the clean install it does the same.
In both causes AOD is on and I turn the phone screen downwards so it isn't always on and it seems that Android OS and Device idle are always staying awake. Where it went from using 3% battery at night (screen downwards) it went to 10% (screen downwards).
Currently I am on 62% over 15 hours of not using my phone and screen downwards. Where before I only reached that point when I would play PoGo a hour at the end of the day.
Anyone else having those issues?
tiesto14 said:
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
---------- Post added at 02:30 AM ---------- Previous post was at 02:30 AM ----------
Hello !
Any way to install App Lock manually ? I reflashed your Rom and selected App Lock in CSC but can't find it...
Click to expand...
Click to collapse
If you selected it in aroma and didn't install any other csc after the rom flash it is in advanced featurs
eranyanay said:
Hi,
Its my first root experience with the s8.
I love the rom.
However, I am unable to control the bixby button. I try to modify it behavior with bxActions or similar but nothing happens.
Is it depend on some of the Samsung apps? If so, which one (or is it possible to just have it working)
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
If you removed the bixby apks you can't control it anymore
Koehlix said:
Hi folks, i flashed Dolby atmos in aroma, but if i try to open the app, the process stop working. Viper works fine. Is there a fix?
Sent from my SM-G950F using XDA-Developers Legacy app
Click to expand...
Click to collapse
I suggest you to post your issues at the dolby atmos thread, as I'm not the author of that mod
TarekElsakka said:
Hi there!
I am currently running BatMan-ROM V1.1.1 and kernel version (4.4.13), I'm not sure if that's your kernel or the stock one because I don't remember the aroma choice I made.
I have tried disabling and re-enabling all the advanced features but palm swipe to capture screen still won't work. Any idea as to why that is happening? It's not a big deal but I find that feature useful sometimes, however if it's a hassle I can certainly live without it.
Thanks a lot, Tkkg!
Click to expand...
Click to collapse
That kernel version you mention is the stock kernel.
That feature definitly works. Tested just now. But you really need to start at the edge of the screen. If you just swipe over it it won't do anything.
I had to start swiping at the very beginning of the edge screen
Borfas said:
hi, This icon from statusbar would be nice changed with AOSP style.
View attachment 4212340
Click to expand...
Click to collapse
I see, don't know if that's so easy doable
RDDraco said:
So recently did a clean install for V1.1.1 since I first did a dirty flash and I noticed my battery draining quicker then it did before. But even with the clean install it does the same.
In both causes AOD is on and I turn the phone screen downwards so it isn't always on and it seems that Android OS and Device idle are always staying awake. Where it went from using 3% battery at night (screen downwards) it went to 10% (screen downwards).
Currently I am on 62% over 15 hours of not using my phone and screen downwards. Where before I only reached that point when I would play PoGo a hour at the end of the day.
Anyone else having those issues?
Click to expand...
Click to collapse
If you just made a clean install, simply wait for a few days. Your phone is currently analyzing your usage and indexing the data and files you got on the sd and internal storage.
Also it you don't use the phone during the night, enable flight mode in order to get better battery (as it doesn't need to be connected all the time, maybe with bad receiption)
Sent from my BatMan powered SM-G955F
I suggest for clear sound and high volume: am3d (Download and install from magiks) and the original player in the app samsung store, now
enjoy with soundalive.... end edgelightning effect.
Installed it, everything is pretty much fine.
Only thing is V4A is not working i did a clean install, did the magisk update that works with it in the aroma installer, but when i turn it on nothing happens on my headset. Aswell on speaker.
Btw, the ''better camera quality'' mod is that zero's mod or should i still patch zeros mod on it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
# 1 - Introduction
# 2 - ROM features
# 3 - Kernel features
# 4 - ROM / Kernel links
# 5 - Sources and thanks
# 6 - FAQ and Telegram support
# 1 - Introduction
Hi! Welcome to Android Pie DeluxeROM® for exynos8895!
This ROM is compatible with N950F/FD/N, G955F/FD/N and G950F/FD/N.
At this point you should already know this, but just in case... Installing a custom ROM requires TWRP, and installing a modified binary such as TWRP, will increase our knox timer to 0x1, restricting us to use most of the knox features and without a way to reset it. With this custom ROM, we'll get most of the features back, keep reading
WARNING : WE DON'T TAKE RESPONSABILITES WITH WHAT HAPPENS ON YOUR DEVICE.
# 2 - ROM features
- Based on latest N950FXXSFDUG6
- Security patch 1 aug 2021
- AROMA installer to customize what we need
- Odex (Modded files has ben reodexed to get a better performance)
- Debloat
- Deknox
- Build.prop tweaks
- Secure folder patch
- RMM patched
- OEM toggle always enabled
- Decrypted CSCs and tweaked (Call recording, LTE only...)
- Safetynet/Netflix/S-Health fixes
- Official status on settings
- Signature checks disabled
- Native WebView without Chrome dependency
- Flash available till 1%
- Endless trials on theme store
- Modded TouchWiz with custom grid sizes (up to 8x8)
- Magisk root (optional)
- Chinese smartmanager (optional)
- AppLock (optional)
- Dual speaker (optional)
- ROM/Kernel/BLCP/DRC auto-updated
- Ton of mods under DRC (DeluxeROMControl) such as dual bar, remap for all keys, toggle styles, panel colors, advanced reboot menu, wifi/signal/alarm/sound styles, led settings, kernel settings... and much more
# 3 - Kernel features
- Based on latest N950FXXSDDTJ1 sources
- Compiled with stock google gcc 4.9
- Removed knox/tima/defex and all security restrictions
- Removed forced /data encryption and dm-verity
- Added props to help with S-Health, SmartView, Secure Folder, etc...
- Added all stock governors and schedulers
- Added WireGuard
- Added NTFS (R/W) support
- Added fake knox (0x0) and other small hacks
- Added DriveDroid support
- Added gestures (DT2W,S2W,S2S)
- Added led fading
- Removed forced selinux enforcing
- SELinux permissive by default (Switchable on DRC)
- CRC disabled by default (Switchable on DRC)
- Low memory killer profiles (Switchable on DRC)
- Patched sepolicy to avoid lags
# 4 - ROM / Kernel links
- First we need TWRP with working /data partition. If you don't know how to, please go to THIS thread.
- Download the ROM from here :
DRIVE - DRIVE2 - DRIVE3 - MEGA - MEGA2 - AFH
- Push to the phone
- Wipe system/data/cache/dalvik
- Install the ROM and after the auto-reboot wait about 10mins.
- Done
Kernel is built-in the ROM, but in case you need to reflash it, here are all the releases :
GITHUB KERNEL RELEASES
# 5 - Sources and thanks
DRC CODE SOURCE
KERNEL CODE SOURCE
List of developers/testers who contributed to this :
- @a.raul for all his extensive help on this project (mods, icons, fixs...)
- @DeluxeTeam®
- @ISS81
- @skywalkerr
- @jotajotavader
- @Jhonny_The_Raven
- @pablostriker19
- @Logel
- @ANDROIDXFOREVER
- @BudHorn
- @FD2R_K20A
- @msubhani
- @corsicanu
- @SuperRs
- @Grouxho
- @thereassadd
- @khongloi
- @yash92duster
- @daxgirl
- @topjohnwu
- @amarullz
That's all! Don't forget to press the thanks button
If you want to make a contribution, press Donate button or click HERE
Enjoy
FAQ
DO NOT REPORT BUGS OR TRY TO GET ASSISTANCE WHILE USING MODDED VERSIONS USUALLY MADE BY KANGERS LIKE @mpal AND OTHER 4PDA MEMBERS.
- What's dual statusbar (DSB) ?
+ The mod consists on duplicate the statusbar size and unlock more "positions" on "Statusbar views position" on DRC. This will give us more space to place our views like carrier, network speedmeter, batteries, icons, etc ...
- How can I activate dual statusbar ?
+ Once you flashed the ROM, you have a zip on the internal memory called DUAL_SB. This zip will detect which statusbar you have and change it. So it's valid too to revert dual to single.
- Why the statusbar custom background takes some time to be shown after a reboot ?
+ This happens only with images (not colors nor gradient), and it have a reason, when the device is booting, the UI can't access to your internal memory (for security reasons), so, when the mod tries to load the image, it fails. On the past this give us a headache with force-closes and not showing images. Now it simply will load it when the system sends the flag BOOT_COMPLETED. How much time it takes ? Not much really, from 10 seconds up to 1:30min.
- Where I can find backgrounds that fits with dual statusbar ?
+ We added a folder on your internal memory called DLX_BGS with more than 50 designs. If is not enough, you can always use any other image...
- Why I can't enter to the sub-screens on DRC ?
+ The statusbar views have a "master" preference called "Icons hidden", ALL the icons picked here won't be visible on the statusbar and the sub-screens will be disabled (why would we edit preferences without show the view ?). Don't forget to un-hide before edit them.
- DRC needs root and busybox to work ?
+ No. ONLY the kernel configurations needs root and busybox (both).
- I need mTweaks to configure DeluxeKernel ?
+ NO. You have a screen on DRC to configure it, so, don't use other apps while you're on this kernel.
- I switched to permissive but it doesn't change.
+ First of all check root and busybox, if they are ok wait few minutes. Sometimes magisk is slow to grant the root. This applies to all kernel configurations.
- I rebooted and I'm again on enforcing SELinux.
+ The boot is always with the default values, and as the statusbar, when the flag BOOT_COMPLETED is sent, kernel configurations are applied.
- If I flash another kernel, will DRC override kernel configurations ?
+ No, if is not the kernel provided, DRC won't show you the preferences related and won't apply them, so you can still using the app provided (usually) with the kernel.
- Double tap to wake doesn't works as expected with AOD.
+ Known issue, but no solution for now. (AOD have already a double tap to wake with the home button without press it, maybe is enough with it )
- What's the "Fingerprint wake-on" exactly ?
+ I made it thinking on the S7 where the user needs to press the button to wake-up the screen, but is good for us if we don't want to wast battery with the sensor. If it's disabled, fingerprint stills working, but won't wake up the device.
More questions when I get free...
Telegram support
English group HERE
Spanish group HERE
Reserved 2
Sounds nice! Will give it a try. I'd love RomControl Roms
Nice job!! Congrats master!!!
Feature Request in rc; 3minit clock
Bug; ram bar recents - height wrong?!
Bushido1992 said:
Feature Request in rc; 3minit clock
Bug; ram bar recents - height wrong?!
Click to expand...
Click to collapse
3minitclock? Did u see what u have in RC for clock? 3minit is not needed...
And what bug of ram bar? Any problem with that
thanks bro finally a serious rom for the note 8 a few things but done well congratulations
Sounds good. Trying asap. Thanks
AbrahamGC said:
3minitclock? Did u see what u have in RC for clock? 3minit is not needed...
And what bug of ram bar? Any problem with that
Click to expand...
Click to collapse
I like 3minit clock because there a tons of settings and customizations(also a little bit more than RC - i miss german date settings^^) . Yeah i look'd up to all RC settings.
To rambar - 4 me i think it's too far down (i only know it on top) . Look at my attachment
Good work so far. All runs fine at the moment
how can I decrease aod light?
Bushido1992 said:
I like 3minit clock because there a tons of settings and customizations(also a little bit more than RC - i miss german date settings^^) . Yeah i look'd up to all RC settings.
To rambar - 4 me i think it's too far down (i only know it on top) . Look at my attachment
Good work so far. All runs fine at the moment
Click to expand...
Click to collapse
If you want in German I can send you an strings.xml and you can translate it, then all mods will be in German too. Just PM me.
RAM bar you r right it's little down, I will fix it on next release, don't worry.
arshia.sunboy said:
how can I decrease aod light?
Click to expand...
Click to collapse
There isn't any mod added for that, mate
Thanks for your ROM and Rom control.
After installation on my S8-fd, I have to play with Magisk manager and enable permission, after that can start Rom control. Then, no root, and installed Magisk 16.4, enable System ui permision for Superuser. After that, reboot menu worked.
But, still can not enable OEM unlock. What to do?
Gear vr and Dex working? What about people with OEM issues?
miloshp said:
Thanks for your ROM and Rom control.
After installation on my S8-fd, I have to play with Magisk manager and enable permission, after that can start Rom control. Then, no root, and installed Magisk 16.4, enable System ui permision for Superuser. After that, reboot menu worked.
But, still can not enable OEM unlock. What to do?
Click to expand...
Click to collapse
The Magisk "fight" are explained on the FAQ, but well, u made it working.
OEM unlock, the ROM contains RMM patch so u shouldn't have that problem. All my testers never faced problems with that so.... i'm not sure what happened.
Motawa88 said:
Gear vr and Dex working? What about people with OEM issues?
Click to expand...
Click to collapse
Gear VR are tested, DEX I don't have, but I don't removed anything related, so it will work.
OEM as I said, have RMM patch so it shouldn't have any problem.
I can't find the link to download the Rom... ?
Or someone point it plz....
firasusman said:
I can't find the link to download the Rom...
Or someone point it plz....
Click to expand...
Click to collapse
Links are on installation steps buddy...
How to install :
1- Make a backup!
2- Wipe data/system/dalvik-cache/cache
3- Install the ROM. AFH - MEGA
4- Let it boot and enjoy
AbrahamGC said:
Links are on installation steps buddy...
How to install :
1- Make a backup!
2- Wipe data/system/dalvik-cache/cache
3- Install the ROM. AFH - MEGA
4- Let it boot and enjoy
Click to expand...
Click to collapse
Thanks bro... ?
Hello Deluxe Team
I have flashed this Rom right now to test it and what should i say? Wow. It feels really fast! I have seen the animations in developer options are set to 0.5 but also with default settings 1.0 it feels still really fast. Amazing.
Only 1question. You also have debloat the setup wizard (or something was going wrong on my end)? After first boot i can't set up my phone with wifi, Google account, Samsung account, Google assistant etc. to restore all my apps and settings. It's a bit awkward to restore all that stuff later manually.
Flashed on my note 8, clean installation with DBT CSC (Germany) and SuperSU.
Greetings Logel
Gesendet von meinem SM-N950F mit Tapatalk
Looks good, will it work on N950N? Thanks.
Sent from my SM-G965F using Tapatalk