DISCLAIMER
I am not to be held responsible for any of the damage that occurs to your device during this process. You are yourself responsible for any damage done (if) to your device during this process.
REQUIREMENTS
Make sure your device is charged above 80%.
We recommend creating a backup of all your important files before beginning with this process.
HOW TO INSTALL STOCK ROM IN MOTO G5S:
Download Moto G5s Stock Firmware from below (in download section).
Install Motorola Driver and ADB Fastboot Driver on your PC.
Now extract stock firmware in ADB Fastboot folder.
Now, turn off your device and boot into bootloader by pressing volume down button +power button simultaneously.
Now, connect your device to your PC via a USB Cable.
Open a command prompt window and type the following commands:
Code:
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot flash dsp adspso.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash system system.img_sparsechunk.8
mfastboot flash system system.img_sparsechunk.9
mfastboot flash oem oem.img
mfastboot erase cache
mfastboot erase userdata
mfastboot erase DDR
mfastboot oem fb_mode_clear
mfastboot reboot
Downloads:
All firmware MONTANA_OPP28.65-37 : 1.5GB
MONTANA_OPP28.65-37-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
MONTANA_OPPS28.65-37-2-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Minimal ADB Fastboot Drivers size: 628.5KB
it´s worked ! thanks
Retbr or retus? Thanks
Sent from my Moto G5s using XDA Labs
Montana XT1792 ?
Android official oreo?
Do you have petch security preference?
Touch Screen not Working!
Retbr here, no bugs or others problems
worked, thank you
Someone has tried in the XT1790?
Will this change the software channel from retin to retla? @lohanbarth
wesmat95 said:
Will this change the software channel from retin to retla? @lohanbarth
Click to expand...
Click to collapse
yes it will change your software channel so that it does not flash flasher zip kaminari.
Works on reteu?
Hi the process to unlock bootloader Is the same as android 7?, And if is the same, the twrp also Is the same forma Android oreo ?
I have a doubt. I installed the kaminari zip. Can I flash this without problems? I wanted to clean the phone and take advantage.
Adi5 said:
Works on reteu?
Click to expand...
Click to collapse
Yes
Cesarcami53 said:
Hi the process to unlock bootloader Is the same as android 7?, And if is the same, the twrp also Is the same forma Android oreo ?
Click to expand...
Click to collapse
Yes
LucasUruguay said:
I have a doubt. I installed the kaminari zip. Can I flash this without problems? I wanted to clean the phone and take advantage.
Click to expand...
Click to collapse
it's the same ROM, but yes you can flash it
Software channel not changed
Hi @lohanbarth, I flashed the ROM and works great. But you mentioned that software channel will change to retla. But in about phone it is still showing retin. I used regular fastboot( not mfastboot) on Ubuntu 18
Will this work on a retgb device running NPPS26.102-49-11? Thanks
Works on reteu,channel ofc its still reteu
I dirty flashed in my dad's phone works fine till now,if any problems will happen I will clean flash?
Just omited fastboot erase userdata
siarp said:
Will this work on a retgb device running NPPS26.102-49-11? Thanks
Click to expand...
Click to collapse
Yes
Adi5 said:
Works on reteu,channel ofc its still reteu
I dirty flashed in my dad's phone works fine till now,if any problems will happen I will clean flash
Just omited fastboot erase userdata
Click to expand...
Click to collapse
By dirty flashing you just skipped erase userdata command, yes?
Daniel936 said:
By dirty flashing you just skipped erase userdata command, yes?
Click to expand...
Click to collapse
Yes
Related
Hello folks,
I'm in the middle of nowhere, I did flash my Moto E via mfastboot everything went smooth when you press power button black screen pops up says Baseband: <not found> when you press power button again device boots into normal mode.
This are the commands which I have used in flash.bat
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
Kindly shed some light on it.
XDA_Tinker said:
Hello folks,
I'm in the middle of nowhere, I did flash my Moto E via mfastboot everything went smooth when you press power button black screen pops up says Baseband: <not found> when you press power button again device boots into normal mode.
This are the commands which I have used in flash.bat
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
Kindly shed some light on it.
Click to expand...
Click to collapse
Unlock device and it will boot
nguyenquangduc2000 said:
Unlock device and it will boot
Click to expand...
Click to collapse
Thanks mate! It worked with firmware flasher.
I got the same problem when i flashed marshmallow on my xt1524. Then i tried to flash previous lollipop 5.0.2 modem files. I Only used these commands.
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
And after this, phone booted up and loaded nicely. After setting up the device, i again flashed new Marshmallow 6.0 modem files using these commands.. and this time, it works fine.
XDA_Tinker said:
Thanks mate! It worked with firmware flasher.
Click to expand...
Click to collapse
Can you tell me what "firmware flasher" is? I need to restore my XT1521 to stock (if possible) and am looking for help in doing so.
To flash files with "fastboot" do you boot to the screen shown in the OP?
What is the difference between "fastboot" and "mfastboot"?
Is it better/easier to flash using Windows or Linux? I have experience with both, but not so much in using ADB or fastboot.
umairprince2009 said:
I got the same problem when i flashed marshmallow on my xt1524. Then i tried to flash previous lollipop 5.0.2 modem files. I Only used these commands.
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
And after this, phone booted up and loaded nicely. After setting up the device, i again flashed new Marshmallow 6.0 modem files using these commands.. and this time, it works fine.
Click to expand...
Click to collapse
Thank you for sharing your experience.:good:
phayz said:
Can you tell me what "firmware flasher" is? I need to restore my XT1521 to stock (if possible) and am looking for help in doing so.
To flash files with "fastboot" do you boot to the screen shown in the OP?
What is the difference between "fastboot" and "mfastboot"?
Is it better/easier to flash using Windows or Linux? I have experience with both, but not so much in using ADB or fastboot.
Click to expand...
Click to collapse
Thank you for showing interest on this issue.
Here is the best guide which can help me in solving your issue: http://forum.xda-developers.com/moto-e-2015/general/eng-moto-e-stock-firmware-flasher-t3348202
phayz said:
Can you tell me what "firmware flasher" is? I need to restore my XT1521 to stock (if possible) and am looking for help in doing so.
To flash files with "fastboot" do you boot to the screen shown in the OP?
What is the difference between "fastboot" and "mfastboot"?
Is it better/easier to flash using Windows or Linux? I have experience with both, but not so much in using ADB or fastboot.
Click to expand...
Click to collapse
Yes to flash with fastboot you should turn your device into boot mode by holding power+volume down key.
I guess both are same fastboot and mfastboot. guys correct me if im wrong.
I prefer windows it's easy to use.
XDA_Tinker said:
Yes to flash with fastboot you should turn your device into boot mode by holding power+volume down key.
I guess both are same fastboot and mfastboot. guys correct me if im wrong.
I prefer windows it's easy to use.
Click to expand...
Click to collapse
Thank you. I'm hoping that with the "firmware flasher" and your information I'll be able to return my XT1521 to normal use.
phayz said:
Can you tell me what "firmware flasher" is? I need to restore my XT1521 to stock (if possible) and am looking for help in doing so.
To flash files with "fastboot" do you boot to the screen shown in the OP?
What is the difference between "fastboot" and "mfastboot"?
Is it better/easier to flash using Windows or Linux? I have experience with both, but not so much in using ADB or fastboot.
Click to expand...
Click to collapse
phayz said:
Thank you. I'm hoping that with the "firmware flasher" and your information I'll be able to return my XT1521 to normal use.
Click to expand...
Click to collapse
Hopefully, best of luck! Happy Flashing...
Hello all,
I currently have a Moto Z XT1650-05 SHERIDAN Dual Sim from China. I tried to install TWRP and root it but messed it all up. Now I am stuck in a bootloop. I tried to flash the stock rom in mfastboot using the XT1650-05 GRIFFIN China Stock ROM but it gets to the "Erasing" screen with a droid and keeps looping from there.
Have tried to google all over for a "SHERIDAN" ROM but not able to find one either. Could any kind soul here point me in the right direction to save my device?
Thanks so much in advance!
You can download stock firmware from there:
http://forum.xda-developers.com/moto-z/development/moto-z-official-firmware-downloads-t3449837
use mfastboot to flash it.
alphaeva said:
You can download stock firmware from there:
http://forum.xda-developers.com/moto-z/development/moto-z-official-firmware-downloads-t3449837
use mfastboot to flash it.
Click to expand...
Click to collapse
Thanks for the reply. Unfortunately this list does not include the Sheridan variant, only the Griffin ones. It's okay, I managed to figure out a workaround.
how u install goggle play in china version?
...
Just flash any Griffin firmware, for safety you should first delete gpt and bootloader IMG. These variants share their firmware with each other, according to website spec info.
Sent from my XT1650 using XDA-Developers mobile app
I have the same trouble with my European version. I tried to flash a griffin version and now it is stuck in bootloop
I had the same issue awhile ago. I fixed it by using the ADB command prompts version and installing it piece by piece. It took longer but works flawlessly now. The directions are somewhere in the forums Ill see if I can find them.
Here is the command I use to flash the ROM
Code:
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash system system.img_sparsechunk.8
mfastboot flash system system.img_sparsechunk.9
mfastboot flash system system.img_sparsechunk.10
mfastboot flash system system.img_sparsechunk.11
mfastboot flash system system.img_sparsechunk.12
mfastboot flash system system.img_sparsechunk.13
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
erase partition.gpt
evanxyj said:
Just flash any Griffin firmware, for safety you should first delete gpt and bootloader IMG. These variants share their firmware with each other, according to website spec info.
Sent from my XT1650 using XDA-Developers mobile app
Click to expand...
Click to collapse
hi, how can erase partition gpt?
because is the only one with errors in fastboot load rom
thanx
rvinturis said:
hi, how can erase partition gpt?
because is the only one with errors in fastboot load rom
thanx
Click to expand...
Click to collapse
Sorry. No idea about your situation, but instinct tells me you are mostly fxxked up if you mess up with gpt partition.
Sent from my OnePlus3T using XDA Labs
I try to install stock rom for motorola xt 1650-03 griffin , but was not good idea . Because is not genuine for my moto z Sheridan . Now my moto work like a charm but during the start up , remain in fastboot mode, after that must push the power button in start for continue start up process. Afterthat everything is normal. My moto z Sheridan have unlock bootloader, no Root and official firmware 7.0
---------- Post added at 01:36 PM ---------- Previous post was at 01:34 PM ----------
I cannot find stok rom nougat for Sheridan european model. Xt1650-03.
rvinturis said:
Now my moto work like a charm but during the start up , remain in fastboot mode, after that must push the power button in start for continue start up process.
I cannot find stok rom nougat for Sheridan european model. Xt1650-03.
Click to expand...
Click to collapse
To fix stuck @ bootloader (START only) - on bootloader, run:
Code:
fastboot oem fb_mode_clear
Then restart it, tell me if it helps
i have the same problem, have xt1650-03 sheridan, i can use some roms, but i want a stock rom and lock the bootloader bsecause my bluetooth died.
fastboot oem fb_mode_clear it works.
HELP!
solitudinal said:
Thanks for the reply. Unfortunately this list does not include the Sheridan variant, only the Griffin ones. It's okay, I managed to figure out a workaround.
Click to expand...
Click to collapse
please tell me what you have done because im stuck with the same problem
help!
solitudinal said:
Thanks for the reply. Unfortunately this list does not include the Sheridan variant, only the Griffin ones. It's okay, I managed to figure out a workaround.
Click to expand...
Click to collapse
please tell what was the workaround because im facing the same problem and dont know what to do!!!:crying:
Hi all, i have found this on Motozbrasil Blogspot.
It reported XT1710-01, XT1710-02, XT1710-06, XT1710-07, XT1710-09 e XT1710-10 models as working, but my XT1710-08 works too (see details in this post).
>>>> All credits and thanks go to motozbrasil and its staff. It is not my creation, i have just shared and reported my personal experience with my XT1710-08, not listened on that site.
A special, big, superb thanks to Junior Passos @Junior Passos the op of the motozbrasil thread. <<<
Basical steps:
1) Install drivers (Win) and reboot pc;
2) Unzip firmware and ADB + FASTBOOT - MZ2PLAY in the same folder (thanks to htcmania for package);
3) Put your phone in fastboot mode (Vol down + Power) then Connect to pc, waiting for drivers if needed;
4) Double click on z.bat (edit it with your own commands or use my zips attached changing "mfastboot" voices with "fastboot", so delete "m" from every single command), press a button.
Profit.
We needed a retail fastboot Oreo rom, so here we are.
All at your own risk.
Good luck.
Due to motozbrasil site down on link posted, i linked new adb fastboot and Installer. As soon as possibile i will change and upload installers attached.
Other links for rom only, here (thanks @thedoginthewok):
MEGA:
https://mega.nz/#!Y51hDRRQ!fxS5qoi2rklgtyQP5ydpcd7nM7qIl-wbsd9zJIF6doQ
Google Drive:
https://drive.google.com/file/d/1kyr8AHFZKv5-ASmCEpGHc8CqGgJFc6YO/view
I advice you to proceed over Windows, but in case...
> On Linux
Linux doesn't need drivers.
How to install adb/fastboot on linux, macos, win (depends on your distro): https://www.xda-developers.com/install-adb-windows-macos-linux/
If you are under Ubuntu the easiest way for installing adb-tools is (from terminal):
sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt-get update
sudo apt-get install android-tools-adb android-tools-fastboot
Click to expand...
Click to collapse
Command under Terminal (Win/Linux) are:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase DDR
fastboot oem fb_mode_clear
Click to expand...
Click to collapse
In some cases (for example XT1710-08) is useful to skip (if you come from NPSS26.118-19-1-6):
fastboot erase modemst1
fastboot erase modemst2
Click to expand...
Click to collapse
If you pass directly from ZUI skip also:
fastboot flash modem NON-HLOS.bin
Click to expand...
Click to collapse
Those for preserving signal and data connection.
---
If you have a corrupted boot.img and you are not able to flash (like bangood or other shops do with chinese model), you first have to give that:
fastboot flashing unlock
Click to expand...
Click to collapse
Hope is useful.
Link above are for Win (1st) and Linux (2nd)**.
** if you use attached .sh remember you have to connect you phone in fastboot mode to pc and then double click on it in the same folder you have unzipped firmware. Attached .bat and .sh files evading erase modemst1 and st2, so it is good for some brand device, not for other.
Remember, all at your own risk.
Thanks @KirMit
I confirm, that all is working after update on XT1710-11 (China Mobile), BUT! do not flash all - skip:
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
If you want your modems and fingerprint sensor are still working!
Click to expand...
Click to collapse
About Magisk, you could give a thanks to Fabio Feher:
Fabio Feher said:
It work for me:
1: Reboot into Bootloader
2: ADB Flash TWRP
3: Start Recovery (TWRP)
4: Enter in ADVANCED > TERMINAL
5: Run commands:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
6: Flash Magisk
7: Reboot.
Click to expand...
Click to collapse
It should work. Unfortunately,I'm already using Oreo. Otherwise,I will try this fastboot ROM.
HTCDevil said:
Hi all, i have found this:
http://motozbrasil.blogspot.it/2018/05/firmware-moto-z-play-xt1710-firmware.html?m=1
All credit and thanks to motozbrasil and its staff.
I will try it on my XT1710-08, although not in the list on the site.
We need a retail fastboot Oreo rom, so here we are.
All at your own risk.
Good luck.
Click to expand...
Click to collapse
If possible , could you please upload the firmware on google Drive , because i am not able to download oreo firmware from Your given link, it downloads for about 100MB and then the download process fails.
flashnub said:
If possible , could you please upload the firmware on google Drive , because i am not able to download oreo firmware from Your given link, it downloads for about 100MB and then the download process fails.
Click to expand...
Click to collapse
I could try
I've had trouble with the download myself (hat to restart a couple of times), so I uploaded it to Google Drive and Mega.
md5 d134168fe189d187f5728a440c380442
Google Drive
Mega
I've successfully upgraded my phone (XT1710-09) to oreo with this.
My phone is bootloader unlocked and was rooted with Magisk. before this.
TWRP was overwritten with stock recovery, but after reflashing I can't get it to decrypt, so no root for now. But everything else is working fine.
Thank you
thedoginthewok said:
I've had trouble with the download myself (hat to restart a couple of times), so I uploaded it to Google Drive and Mega.
md5 d134168fe189d187f5728a440c380442
Google Drive
Mega
I've successfully upgraded my phone (XT1710-09) to oreo with this.
My phone is bootloader unlocked and was rooted with Magisk. before this.
TWRP was overwritten with stock recovery, but after reflashing I can't get it to decrypt, so no root for now. But everything else is working fine.
Click to expand...
Click to collapse
Hey thanks for Uploading it to Google Drive .
I have successfully loaded the Oreo Firmware, no hicc-ups at all, procedure went smooth.
Now my Moto Z2 Play XT1710-10 is running Oreo
thedoginthewok said:
I've had trouble with the download myself (hat to restart a couple of times), so I uploaded it to Google Drive and Mega.
md5 d134168fe189d187f5728a440c380442
Google Drive
Mega
I've successfully upgraded my phone (XT1710-09) to oreo with this.
My phone is bootloader unlocked and was rooted with Magisk. before this.
TWRP was overwritten with stock recovery, but after reflashing I can't get it to decrypt, so no root for now. But everything else is working fine.
Click to expand...
Click to collapse
Thanks, i edit first post.
Good flash guys
flashnub said:
Hey thanks for Uploading it to Google Drive .
I have successfully loaded the Oreo Firmware, no hicc-ups at all, procedure went smooth.
Now my Moto Z2 Play XT1710-10 is running Oreo
Click to expand...
Click to collapse
Nice to see, no thanks for me
Does fastboot update method wipe userdata? Also have 09 model, no root and locked boot - can i update without loosing my data, etc?
Face1ess said:
Does fastboot update method wipe userdata? Also have 09 model, no root and locked boot - can i update without loosing my data, etc?
Click to expand...
Click to collapse
Data is not wiped.
For those who were looking for fastboot commands here they are:
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase DDR
fastboot oem fb_mode_clear
HTCDevil said:
Nice to see, no thanks for me
Click to expand...
Click to collapse
hey thanks mate, you were the reason i even thought of trying to Flash the Firmware first.
Face1ess said:
Does fastboot update method wipe userdata? Also have 09 model, no root and locked boot - can i update without loosing my data, etc?
Click to expand...
Click to collapse
Users have tested it and said you don't lose your /data
I've updated my 09 successfully without loosing data.
Works for my 09 without loosing anythings. Tkx .
Vavooon said:
I've updated my 09 successfully without loosing data.
Click to expand...
Click to collapse
Great, thanks for info
Niiiicee, updated using your method and everything works nice and smooth. Haven't lost anything either! I hope it doesn't break the OTA
I can also confirm - the data and settings after the update are not touched
09 model, reteu
I have a moto z2 play 7.1.1. NPSS26. 118-22 and the XT1710-09 model. This guide work on my smartphone?
oliondo said:
I have a moto z2 play 7.1.1. NPSS26. 118-22 and the XT1710-09 model. This guide work on my smartphone?
Click to expand...
Click to collapse
It should work without any problem.
Works on my xt1710-08, i evade fastboot erase modemst1 and modemst2.
Hi guys,
Did not see anyone here on XDA who uploaded recently leaked OFFICIAL PIE fastboot image ROM for Moto G6 Plus, so I decided to do it for you all. :highfive:
This is a RETAIL release so it should work on all variants of our device (I have XT1926-3 (this is RETEU, Europe, Poland) and flashed it without any problems, phone works flawlessly).
06.03.2019, THE NEWEST PPW29.116-20 FIRMWARE DOWNLOAD (RETAIL)
DOWNLOAD: https://drive.google.com/open?id=1Axk870qsui9w3TnnRQM9pt618CQ0CnHz
MIRROR: https://mega.nz/#!0ZUyTAqI!XXPwj0mcsGs0wLFwxwX8V0OeFXgCe-NXf-2VbDvr5Nc
OLDER BUILD: PPW29.116-16 FIRMWARE DOWNLOAD (RETAIL) - BE CAREFUL, IT BREAKS SAFETYNET ON EUROPEAN G6+ VARIANTS!
DOWNLOAD: https://drive.google.com/open?id=1F0SFwVyXgy3ZixL36W6xwxjqPJAwiDus
MIRROR: https://mega.nz/#!VJ8xEYRT!rb476WxlV099PVJrLwbFIr1Z3XNjo89sO5MU-HfPzMQ
OLDER BUILD: PPW29.116-11 FIRMWARE DOWNLOAD (RETAIL)
DOWNLOAD: https://drive.google.com/open?id=1shkeHg_jxsCTLgcDjwcCgecMLJKC4EB0
MIRROR: https://mega.nz/#!MQ8BBYwJ!KpwfgunwBONWlwAYFmFUEt4UsRPpjn34jJo1GHY66fo
Flashing scripts (G6PlusFlashPieOfficial.bat from the attached .zip file can be also used, it contains the same commands as below):
If you are not sure what are you doing, ask here or read fastboot documentation before flashing anything:
--- If you don't want to erase all your phone data, use script from G6PlusFlashPieOfficial_NoErase.zip. This will upgrade your G6+ to Android Pie without erasing data. ---
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
It works, indeed, flawless, though I used the version Vache shared on telegram. I assume it's the same file you used for this tutorial. I think it's important to mention that there are 2 possibilities to update:
1. The way you describe here
2. Use the update file (Blur_Version.29.11.11.evert.retail.en.US.zip) and place in the root of the internal storage. Then check for updates (though I think this only works when coming from a specific build).
Screenshots.
PS. Digital Wellbeing installed via Magisk.
My brother has a Moto G6 Plus (bought in Europe) without root, will he be able to update it without loosing his data?
Thanks in advance guys.
Is it also posible to use this zip, extract it and then use Fastboot to update without losing enything? So like this:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot reboot
This is normaly how i update my G6 Plus and never expierence problems......
cdfreak said:
Is it also posible to use this zip, extract it and then use Fastboot to update without losing enything? So like this:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot reboot
This is normaly how i update my G6 Plus and never expierence problems......
Click to expand...
Click to collapse
Exactly like this.
@cyberon these commands are for your brother.
rafikowy said:
Screenshots.
PS. Digital Wellbeing installed via Magisk.
Click to expand...
Click to collapse
So you were able to upgrade without getting the "Verity mode is set to disabled" on the boot screen or having your System Updates disabled due to the unlocked bootloader?
thump said:
So you were able to upgrade without getting the "Verity mode is set to disabled" on the boot screen or having your System Updates disabled due to the unlocked bootloader?
Click to expand...
Click to collapse
"Verity mode is set to disabled" is still present on boot screen - I don't care.
System Updates were disabled at the begining - there was some information about System Integrity. After flashing Magisk 18 this information dissapeared as you noticed.
smitharro said:
It works, indeed, flawless, though I used the version Vache shared on telegram. I assume it's the same file you used for this tutorial. I think it's important to mention that there are 2 possibilities to update:
1. The way you describe here
2. Use the update file (Blur_Version.29.11.11.evert.retail.en.US.zip) and place in the root of the internal storage. Then check for updates (though I think this only works when coming from a specific build).
Click to expand...
Click to collapse
which file i need to do the 2nd method and where can i download it?
rafikowy said:
"Verity mode is set to disabled" is still present on boot screen - I don't care.
System Updates were disabled at the begining - there was some information about System Integrity. After flashing Magisk 18 this information dissapeared as you noticed.
Click to expand...
Click to collapse
Just rechecked and found my System Updates page no longer gives the "system integrity" error either. Still do get the "verity" error, but seems of no concern. Cool.
giorgis91 said:
which file i need to do the 2nd method and where can i download it?
Click to expand...
Click to collapse
This should do the trick. Remember to rename the file to Blur_Version......zip. (see my previous post).
https://mega.nz/#!RRF01QID!9QjfFmaVjWQW6ZAoqqbn-tOW9bCYgnn7IojnSgrHLJU
smitharro said:
This should do the trick. Remember to rename the file to Blur_Version......zip. (see my previous post).
https://mega.nz/#!RRF01QID!9QjfFmaVjWQW6ZAoqqbn-tOW9bCYgnn7IojnSgrHLJU
Click to expand...
Click to collapse
Will it wipe the phone ?
giorgis91 said:
Will it wipe the phone ?
Click to expand...
Click to collapse
No, it shouldn't. It's an update file. So it 'll leave all your apps and settings intact.
But if you want to be sure that you have a clean install, do a 'factory reset' prior to the update!
Oh yeah, remember to grant storage the 'motorola update services'
Suggestions
rafikowy said:
Hi guys,
Did not see anyone here on XDA who uploaded recently released OFFICIAL PIE fastboot image ROM for Moto G6 Plus, so I decided to do it for you all. :highfive:
This is a RETAIL release so it should work on all variants of our device (I have XT1926-3 (this is RETEU, Europe, Poland) and flashed it without any problems, phone works flawlessly).
PPW29.116-11 FIRMWARE DOWNLOAD (RETAIL)
DOWNLOAD: https://drive.google.com/open?id=1shkeHg_jxsCTLgcDjwcCgecMLJKC4EB0
MIRROR: https://mega.nz/#!MQ8BBYwJ!KpwfgunwBONWlwAYFmFUEt4UsRPpjn34jJo1GHY66fo
Flashing scripts (G6PlusFlashPieOfficial.bat from the attached .zip file can be also used, it contains the same commands as below):
If you are not sure what are you doing, ask here or read fastboot documentation before flashing anything:
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin[PHP][/PHP]
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
I place an "m" in front of fastboot to use mfastboot.
Get the mfastbootv2 it's best for flashing this way imo
Good work buddy.
What's the command erase carrier for?
smitharro said:
No, it shouldn't. It's an update file. So it 'll leave all your apps and settings intact.
But if you want to be sure that you have a clean install, do a 'factory reset' prior to the update!
Oh yeah, remember to grant storage the 'motorola update services'
Click to expand...
Click to collapse
Is that multilang or only in english?
---------- Post added at 10:01 AM ---------- Previous post was at 09:49 AM ----------
giorgis91 said:
Is that multilang or only in english?
Click to expand...
Click to collapse
smitharro said:
No, it shouldn't. It's an update file. So it 'll leave all your apps and settings intact.
But if you want to be sure that you have a clean install, do a 'factory reset' prior to the update!
Oh yeah, remember to grant storage the 'motorola update services'
Click to expand...
Click to collapse
I ask because I'm italian and I see that the file as "en.US" in the name, i tried just now to rename the file but with "it.IT" and the system find it as an update. But i want to know if i can choose the language or it's just in english
giorgis91 said:
Is that multilang or only in english?
---------- Post added at 10:01 AM ---------- Previous post was at 09:49 AM ----------
I ask because I'm italian and I see that the file as "en.US" in the name, i tried just now to rename the file but with "it.IT" and the system find it as an update. But i want to know if i can choose the language or it's just in english
Click to expand...
Click to collapse
All stock ROMs are multilingual. So Italian shouldn't be a problem.
what dos this mane: Verity mode is set to disabled when you boot the phone up?
cdfreak said:
what dos this mane: Verity mode is set to disabled when you boot the phone up?
Click to expand...
Click to collapse
A short explanation:
dm-verity
transparent integrity checking for block devices
read error if block integrity check fails
try to recover damaged blocks (from Android 7.0)
useful for read-only partitions like*system
fundamental part of*verified boot*on Android
Verified boot
device software integrity based on hardware root of trust
Boot chain (simplified)
verify*bootloader*using a hardware root of trust
bootloader*verifies*boot*and*recoverypartition
kernel*verifies*system*partition
uses dm-verity for the integrity checks once execution has moved to the boot partition
Hmmm. For some reason I get "Server error" in play store. And autobrightness jumps up and down every few seconds. Have tried returning to oreo and reflashing/factory resetting to no avail On reteu.
EDIT: Hmm also get the error in oreo now Anyone know whats up? Came from Lineage 16.
OFFICIAL
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
COMMANDS
Code:
#MOTO G5
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
:fingers-crossed:
Hi takoa, thanks for your efforts. What are the differences with the firmware OPP28.85-16?
security update
Is this flashable in any cedric? I have a Moto G5 XT1675 italiani TIM brand (now with pixelexperience)
Any hope for capturing OTA update? I'd prefer to flash delta update instead of factory image
Hi. I’m currently on Android 7, build NPPS25.137-72-4, reteu channel.
I can directly flash this via fastboot to get 8.1? Thanks!
xfahim Hi, of course you can directly flash this firmware to go to 8.1. Greetings
yilhernandez said:
xfahim Hi, of course you can directly flash this firmware to go to 8.1. Greetings
Click to expand...
Click to collapse
Ah so it doesn’t matter which version am I using? I thought I’d need something for the reteu channel. Thanks for the confirmation!
moto g5
hola amigo, donde puedo descarar el firmware: CEDRIC_RETAIL_8.1.0_OPP28.85-19-4-2_cid50 para el moto g5 xt1670
juan raul perez kana said:
hola amigo, donde puedo descarar el firmware: CEDRIC_RETAIL_8.1.0_OPP28.85-19-4-2_cid50 para el moto g5 xt1670
Click to expand...
Click to collapse
Code:
https://mirrors.lolinet.com/firmware/moto/cedric/official/
can't apply mfastboot commands and when applying fastboot commands.......my phone still stuck in bootloop
vaibhavsirohi91 said:
can't apply mfastboot commands and when applying fastboot commands.......my phone still stuck in bootloop
Click to expand...
Click to collapse
Get the latest firmware from
https://mirrors.lolinet.com/firmware/moto/cedric/official/
Fastboot commands
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Note in order to flash gpt & bootloader the firmware must be the same or newer than what is on your device
If you get a security downgrade error the firmware you are trying to flash is too old
TheFixItMan said:
Get the latest firmware from
https://mirrors.lolinet.com/firmware/moto/cedric/official/
Fastboot commands
Note in order to flash gpt & bootloader the firmware must be the same or newer than what is on your device
If you get a security downgrade error the firmware you are trying to flash is too old
Click to expand...
Click to collapse
Already got the latest one from RETIN folder (India)but still my device stuck into bootloop
vaibhavsirohi91 said:
Already got the latest one from RETIN folder (India)but still my device stuck into bootloop
Click to expand...
Click to collapse
Assuming you got no errors when flashing the firmware & all parts of the firmware were flashed correctly
Did you erase userdata?
You can also go into stock recovery mode and factory reset
Also you can try & remove any sim & sdcards from the device & see if it boots without them
TheFixItMan said:
Assuming you got no errors when flashing the firmware & all parts of the firmware were flashed correctly
Did you erase userdata?
You can also go into stock recovery mode and factory reset
Also you can try & remove any sim & sdcards from the device & see if it boots without them
Click to expand...
Click to collapse
I am getting these errors and i can't even access recovery
vaibhavsirohi91 said:
I am getting these errors and i can't even access recovery
Click to expand...
Click to collapse
Can't see any errors there but you may want to use an older fastboot version
TheFixItMan said:
Can't see any errors there but you may want to use an older fastboot version
Click to expand...
Click to collapse
Logical system not found......and i am using the latest zip from Retin folder (India)
vaibhavsirohi91 said:
Logical system not found......and i am using the latest zip from Retin folder (India)
Click to expand...
Click to collapse
I don't believe that is an error but rather an issue with that version of fastboot
I didn't say use another firmware - just use an older version of fastboot
Try versions from
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
Obviously I presume gpt & bootloader flashed successfully
TheFixItMan said:
I don't believe that is an error but rather an issue with that version of fastboot
I didn't say use another firmware - just use an older version of fastboot
Try versions from
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
Obviously I presume gpt & bootloader flashed successfully
Click to expand...
Click to collapse
Ok wait let me try
vaibhavsirohi91 said:
can't apply mfastboot commands and when applying fastboot commands.......my phone still stuck in bootloop
Click to expand...
Click to collapse
Sorry, but I forgot to indicate that we have to eliminate the "m" from mfastboot.
or rename fastboot.exe to mfastboot.exe :good: