Greetings!
Has anyone else noticed any conflicts with simultaneous bluetooth connections to other types of devices while the Gear S is paired to your phone?
I have a Note Edge from T-Mobile and the Gear S from T-Mo as well. In my car (Chevy Volt) I have the factory infotainment system with navigation, bluetooth, etc. I noticed that at seemingly random times, when I had the phone paired to the car and was either in a call or streaming music, the connection between the car and the phone would be lost. I chalked it up to an issue with the Bluetooth profile stack GM was using and used a wired connection.
Then, I experienced the exact same problem in my truck with an Aftermarket Pioneer head unit connected to the phone. It too would drop the connection at random intervals. That caused me to start to suspect the Note Edge or the ROM I was running on it.
Yesterday, I accidently left for work without my Gear S. Guess what? The connection didn't drop once during my 45 minute commute. So today, I turned off the Gear S before I left work work, and I never lost a connection.
This tells me there is some sort of an issue with the Gear S. Has anyone else experienced this? If so, have you found a fix? To the best of my knowledge, I am using the latest official firmware for the T-Mo Gear S, and I just updated the Gear S app for the phone through the Samsung store, etc.
Thanks!
Just picked up my C5 Ultra, was happy until I tried to use its bluetooth with my car's built-in system (Mazda).
I have two problems:
- continuous stuttering to the point it's not usable, usually starts 1-2 minutes after starting to play music
- when trying to make a call, the phone doesn't route the call to the car, it shows it sending audio to bluetooth device, but no sound comes it also doesn't respond to the call end button in my car
Anybody else with bluetooth problems? Strange thing is it's only my car, it seems to work fine with my bluetooth headset. And there were no issues with my car with my old phones.
same problem here
Thank God someone posted this. I also have a bluetooth headset and from time to time, there's some stuttering then the music stops playing. To fix this, I have to turn off my bluetooth in my phone and restart my bluetooth headset and pair the two again.
I thought this issue is only limited to audio devices. I bought an LG watch urbane and from time to time, the watch gets disconnected. When I try to pair it again, it won't connect even if I try several times. It will only connect if I restart my watch and try to pair it again.
I also have a Moto 360, and there's a lot more random disconnects with this phone than any other phone I've used before. However, it does normally reconnect very quickly. But I did have to disable the vibrate on connect/disconnect because it got to be annoying.
I've given up on my car's bluetooth and using another bluetooth receiver and aux-in to my car's stereo. It seems that the older the bluetooth device, the more likely to have issues. Bluetooth 3.0/4.0 headsets seem to work fine.
thejamesarnold said:
Thank God someone posted this. I also have a bluetooth headset and from time to time, there's some stuttering then the music stops playing. To fix this, I have to turn off my bluetooth in my phone and restart my bluetooth headset and pair the two again.
I thought this issue is only limited to audio devices. I bought an LG watch urbane and from time to time, the watch gets disconnected. When I try to pair it again, it won't connect even if I try several times. It will only connect if I restart my watch and try to pair it again.
Click to expand...
Click to collapse
by the way, I have tried my watch urbane connecting to my huawei 4x and it doesn't get disconnected randomly. If it gets disconnected because I left my phone from another room, it will quickly get connected again when I'm near unlike the C5 Ultra that needs my watch to be restarted to be able to connect again.
Check In settings -> xperia connectivity -> throw settings -> Auto-select wirelles option if it is close. if not, close and try. Maybe this help
Not working with my Huawei Watch, it gets paired but inmediatly disconnects asking "add as trusted device?" and after that it's imposible to reconnect. Any help will be will be welcomed.
This phone honestly sucks in many ways. I love the hardware but the software and the cpu is the problem on this phone. Bluetooth sucks, slow processor and ...yea..slow loading on everything. I know it's the phone's bluetooth that disconnects my bluetooth earphones and car audio because it never happened on my Nexus 6. We'll just have to wait till Sony releases Marshmallow on our phones.
Bluetooth cuts in and out when paired
Updated to marshmallow and my Bluetooth still cuts in and out when paired to my boss mini speaker .Sony really has to fix this if they want to remain in the competitive cellphone market.If any suggestions on how to solve this issue please help.
After the update I am also having problems with Bluetootn. In sleep mode Bluetootn off. Accordingly, all the time the connection is lost with the Sony SmartWatch 3 hours. Tired of this problem
nnmka said:
After the update I am also having problems with Bluetootn. In sleep mode Bluetootn off. Accordingly, all the time the connection is lost with the Sony SmartWatch 3 hours. Tired of this problem
Click to expand...
Click to collapse
Yup, bluetooth shutting off is causing all sorts of problems with my Pebble smartwatches too. Basically made them completely useless because of the disconnects soon after the phone is idle.
I'm pretty sure it's tied to the Doze function in Marshmallow, but even when I disable Doze for the Pebble watch app and bluetooth share app, I still have issues. I even got an app called "Disable Doze" to completely turn off Doze functionality. It seems to help, but I still have occasional drops.
Bluetooth seriously sucks on this phone...
Found a solution
I found out what causing that bluetooth disconnects on my Xperia C5 Ultra Dual. It's when wifi and bluetooth are turned on at the same time. I turned off wifi and bluetooth connection is now stable.
My pebble also was disconnecting and it was annoying with all the vibration and it wasn't event reconnecting. But after I turned off the wifi bug is gone. I read that this is a common bug with Xperia Sad...
stenlybg said:
I found out what causing that bluetooth disconnects on my Xperia C5 Ultra Dual. It's when wifi and bluetooth are turned on at the same time. I turned off wifi and bluetooth connection is now stable.
My pebble also was disconnecting and it was annoying with all the vibration and it wasn't event reconnecting. But after I turned off the wifi bug is gone. I read that this is a common bug with Xperia Sad...
Click to expand...
Click to collapse
I'll have to give that a try, I stopped using my C5 because I couldn't stand the bluetooth issues anymore. I'm using, of all things, my 4 year old Nexus 4 now (which I should say works perfectly...)
bluetooth of sonyc5ultra is worst working in connectivity . useless , disconnecting from blue tooth device by its own. Getting irritating by bluetooth issue.
Same Problem here also
I have BLUEDIO bluetooth headphone, it disconnect after restarting bluetooth in my sony c5. When I try to pair it again, it won't connect even if I try it again and again the whole day. It only connect if I restart sony c5 and try to pair it again.
It's a long post - sorry please bear with it..........thanks
Performed a firmware update couple of weeks ago see thread: https://forum.xda-developers.com/mate-10/help/mirrorshare-stopped-t3731964 and all seem well until 2 days ago.
All revolves around bluetooth:
Background:
I have 3 devices which I use regularly for BT connections
Huawei Watch 2 (came with phone )
Car (phone calls only)
BT Headset (Sony SBH52) - used for Music only (my car will not play music over BT so I have my BT headset connect to the AUX port)
Limitation:
A phone can only connect to 2 BT devices at once (as far as I know/have witnessed)
Scenario
Phone is always connected to watch
Get in car - phone auto connects to car BT.
I manually connect phone to BT headset - it drops connection to watch so now my phone is connected to car for phone calls and headset for playing music.
GREAT This works for me and all is OK...and has been working OK for last couple weeks. (I used to use this method with my Nexus 6P and had no issues - I didn't have the smartwatch2 then)
Up until 2 days ago
Phone kept losing connection to BT headset - it would connect and then immediately drop
I couldn't do anything in BT settings on my phone (such as disconnect or forget).
Did all the normal stuff - BT on/off : headset on/off - no change.
"Forgot" BT connection for car.
Headset still had same issue.
Finally removed connection for headset.....reconnected to car BT.
Car BT then started dropping
Finally 'forgot' BT connection for car
Watch appears connected OK however it used to display in the drop down menu what BT device I was connected to - now it doesn't.
The BT symbol also used to have little marks at the side of it to show it was connected to a device - now it doesn't
When I look in BT settings on phone I see my device listed however I am unable to "forget device" or tell if it is connected - only way I can tell if connect is check on the settings on watch which say that it is paired and connected - plus I do get all the alerts on my watch so it's definitely connected and working.
I have factory reset watch, phone, car system and BT headset - still have the issue
Any ideas?
Mate 10 Pro
Firmware: BLA-L09 8.0.0.127 (C432)
zCRiSiSz said:
Huawei Watch 2 (came with phone )
Click to expand...
Click to collapse
Short OFFTopic:
Was it a bundle? Or how did you get the watch?
EGOiST1991 said:
Short OFFTopic:
Was it a bundle? Or how did you get the watch?
Click to expand...
Click to collapse
It was a bundle with Vodafone UK - first 1000 customers to order phone on a monthly contract received HW2
Further testing/info
After another factory reset of the phone and a 'disconnect & reset' of the HW2 and seem to have got it working'ish....
So -
Car BT connects fine and displays in BT settings on the phone as connected
Sony SBH52 headset - connects fine and displays in BT settings on the phone as connected
HW2 - although it connects it does not show in BT settings on the phone as connected - also unable to do anything on the settings for it :|
I'm not convinced that the disconnect & reset is actually performing a factory reset of the watch.
Perhaps this needs posting in the HW2 forum - is there one?
hi guys. came to this site because of the same problem.
Found a fix - reset network settings.
after going into settings menu and resetting network settings,
connect to your bluetooth device again and it should work (at least for me)!
Hello XDA-Devs,
i bought a brand new Amazfit Pace (International) and updated firmware to latest stock. Setup was quite fine and watch paired with my Phone (Redmi Note 3 Pro) and Amazfit Watch App without any problems. I was also able to connect via MTP from Windows 10 PC and store some music on the watch.
Now i tried to connect my bluetooth headset (Bluetooth Bragi Dash Headphone) without any success. I put the Bragi Dash Headphone into pairing mode and in wacht BT menu it opens BT overview with blinking "Searching" indicator. After a while the blinking "Searching" indicator disappears and thats it. The Headphone does not show up. I also tried with a Bluetooth speaker with same result. Both, the Bragi Headphone and the bluetooth-speaker are working without any issues with my Phone, Windows tablets and other devices.
Any clue or same issue? Actually i like the design of the watch, but possibility to pair a bluetooth headset was a buying decision for me ..
thx and br
Arangato
1. Make sure the BT devices aren't paired with any other devices before trying to pair with watch;
2. If BT on watch is working fine, you should stay connect if you go away from your phone about 10m (without barriers), if connection drops 30-50cm from phone then maybe you have a problem with the watch's BT (weak connection due to bad antennae or BT chip);
3. Put phone and any other device around in Airplane mode (or switch other BT devices off), do the same to watch, then enable only BT and try to pair again. There are some known cases of WiFi/BT interference.
If everything fails, maybe the phone/speaker simply aren't compatible if they pair with other devices. Watch should be able to list other BT devices nearby, if the list is always empty, looks like BT is damaged. Try an unpair (reset) and pair again with another phone and/or account on Amazfit app. Good luck.
Hello lfom, thanks for fast reply. I did a factory reset and it still does not work with my Bragi Headphone (150€) (https://support.bragi.com/hc/en-us/articles/115000132569-The-Headphone-Technical-Specifications)
But one good news, i tried with a very cheap bluedio BT-Headset (9€) and surprisingly this headset i could directly connect to my Amazfit Pace watch and works fine...
... so it seems there is some general incompatibility... maybe related to BT 4.0 A2DP version. As you see here http://www.phonemore.com/xiaomi-amazfit/specs/3497 the Amazfit Pace should support BT 4.0 A2DP. I assume the Bragi Headphone does handle the protocolls correctly (had never any issues with them) and they are premium product... so unfortunately it seems we have to wait for fix fom Amazfit side.
Anyone else can report incompatible BT devices? Or maybe anyone else out there tried to connect a Bragi product?
Thx and br
Probably it cannot be fixed by Huami, as the the limitation is the hardware used in Pace (4.0BLE). I have read somewhere that Stratos uses a different BT chip and supports higher version, not sure if 4.1 or 4.2. There is a list of known compatible and incompatible devices in a Facebook group:
https://www.facebook.com/groups/HuamiAmazfit.Pace.Smartwarch/permalink/344737925947591/
Thx lfom, i joined the group and seems that Bragi The Headphone does not work in general (others report that too). Sad that a standard protocol like bluetooth still seems to have compatabiliy issues. Have to live with it and use different BT-headphone. Thx for your help
Hi... my Kaidi headset will not pair Amazfit as well. I can pair Amazfit with iPhone and can pair Kaidi headset with iPhone but never Amazfit with Kaidi. Sad...
So here's my concern. My stratos with the latest firmware when not in the airplane mode connects to the phone when phones wifi and bluetooth are both on (using bluetooth for wireless headphones) and after im done with headphones or something that uses BT besides watch I turn it off. Same goes for wifi. But then i noticed that my watch is still connected to the phone in amazfit watch app. I can see battery status, watch uploads sport info,I even can test for notifications and there you go - its shows in watch. So I am little bit lost here, how does these two talk between them if bluetooth and wifi are both off? Had pace few months ago and i havent got that problem. It wouldnt be a big of a problem but i noticed slighty drop in battery life. Phone - xiaomi mi a1. Both international versions.
You gave the the app permission to turn Bluetooth on.