hello. I could use some help please. my gf's canadian g5 kept rebooting so I tried to flash the firmware on it but im having nothing but problems. Im using lgup with uppercut and firmware H83110d_00_0504.kdz. I get to 11% and then i get this.
Any help would be appreciated
ottawadad34 said:
hello. I could use some help please. my gf's canadian g5 kept rebooting so I tried to flash the firmware on it but im having nothing but problems. Im using lgup with uppercut and firmware H83110d_00_0504.kdz. I get to 11% and then i get this.
Any help would be appreciated
Click to expand...
Click to collapse
Wow no one answered huh.... That's kinda disappointing I somehow messed up the Santa method and I can get in dl mode and the computer picks it up but lg up only either goes to 4% or it just don't pick up my device..... Boo damn AI's
ottawadad34 said:
hello. I could use some help please. my gf's canadian g5 kept rebooting so I tried to flash the firmware on it but im having nothing but problems. Im using lgup with uppercut and firmware H83110d_00_0504.kdz. I get to 11% and then i get this.
Any help would be appreciated
Click to expand...
Click to collapse
this looks like downgrading from Nougat to Marshmallow may be blocked on the H831 when using LGUP.
as shown in the screenshot.. your phone is on Nougat (20A) but you are trying to flash a Marshmallow KDZ (10D).
Obtain the 20A (or higher) KDZ for your phone model and that should flash in LGUP.
An alternative to flashing the KDZ would be trying to run a factory reset (wiping user data). You can do this from the settings menu on your phone.. or by booting into stock recovery menu. The G5 All-n-one thread on XDA has steps for how to boot into recovery if unsure.
Some users have stated that they have been able to downgrade from N to M with a combination of LGUP 1.14 + UPPERCUT and LGUP 1.11 and DLL MSI. There are downgrade threads in the G5 section here on XDA for more info on that. Not all models support this downgrade though (even though anti-rollback isnt set). You could technically root the phone then manually flash each and every partition to downgrade but thats risky. But to anyone capable and knowing how to do that.. yes that would work as long as you aren't downgrading fuse version.
autoprime said:
this looks like downgrading from Nougat to Marshmallow may be blocked on the H831 when using LGUP.
as shown in the screenshot.. your phone is on Nougat (20A) but you are trying to flash a Marshmallow KDZ (10D).
Obtain the 20A (or higher) KDZ for your phone model and that should flash in LGUP.
An alternative to flashing the KDZ would be trying to run a factory reset (wiping user data). You can do this from the settings menu on your phone.. or by booting into stock recovery menu. The G5 All-n-one thread on XDA has steps for how to boot into recovery if unsure.
Some users have stated that they have been able to downgrade from N to M with a combination of LGUP 1.14 + UPPERCUT and LGUP 1.11 and DLL MSI. There are downgrade threads in the G5 section here on XDA for more info on that. Not all models support this downgrade though (even though anti-rollback isnt set). You could technically root the phone then manually flash each and every partition to downgrade but thats risky. But to anyone capable and knowing how to do that.. yes that would work as long as you aren't downgrading fuse version.
Click to expand...
Click to collapse
That fixed my problem. Thank you
Hi guys,
I just f*** my phone!
I had updated my phone G5 RS988 unlocked edition in the version Rs98821b !
I wanted to downgrade it to the version RS98811c .
I installed lg drives , LGUP_Store_Frame_Ver_1_14_3.msi and uppercut !
I started uppercut loaded the kdz file and the phone was stuck at 5% on the screen or at 11% in the LGUP .
It gets out 10% error ERROR CODE: 0x2BC, Invalid command response code = 0x80000121.
I tried to reboot the device but it is stuck at the Firmware Update(Download Mode) .
Any suggestion ?
Maybe I need any other version of KDZ???
ok guys after some read I fixed the problem by installing the firmware "RS98810h_01_0303.kdz"
So now is possible to downgrade throught twrp or not?
searius said:
ok guys after some read I fixed the problem by installing the firmware "RS98810h_01_0303.kdz"
So now is possible to downgrade throught twrp or not?
Click to expand...
Click to collapse
You are now stuck on Brightpoint firmware that is not for the unlocked version. Your best bet is to follow the instruction on this thread.:
https://forum.xda-developers.com/lg-g5/development/stock-rs988-11c-rom-flashable-zips-imgs-t3612358
11D has the bootloader mode you can get that from here:
https://forum.xda-developers.com/lg-g5/development/stock-rs988-11d-rom-flashable-zips-imgs-t3623199
Don't forget to thank autoprime.
searius said:
ok guys after some read I fixed the problem by installing the firmware "RS98810h_01_0303.kdz"
So now is possible to downgrade throught twrp or not?
Click to expand...
Click to collapse
Hi! Thanks for the post!
I ran into exactly same problem. Any luck downgrading to RS98811c or getting rid of Brightpoint? I wasn't able to flash anything except for RS98810h_01_0303
searius said:
Hi guys,
I just f*** my phone!
I had updated my phone G5 RS988 unlocked edition in the version Rs98821b !
I wanted to downgrade it to the version RS98811c .
I installed lg drives , LGUP_Store_Frame_Ver_1_14_3.msi and uppercut !
I started uppercut loaded the kdz file and the phone was stuck at 5% on the screen or at 11% in the LGUP .
It gets out 10% error ERROR CODE: 0x2BC, Invalid command response code = 0x80000121.
I tried to reboot the device but it is stuck at the Firmware Update(Download Mode) .
Any suggestion ?
Maybe I need any other version of KDZ???
Click to expand...
Click to collapse
Did you ever get your phone fixed? I have the exact same problem. stuck on firmware update and lg up always stuck at 10 percent then error out. thanks
You might want to try flashing the ZIP/IMG
https://forum.xda-developers.com/lg-g5/development/stock-21c-roms-flashable-zips-imgs-t3679907
From TWRP
johnzenobia said:
Did you ever get your phone fixed? I have the exact same problem. stuck on firmware update and lg up always stuck at 10 percent then error out. thanks
Click to expand...
Click to collapse
Yes bro I fixed it.
But I dont remember very much.
What I did was to install again the same firmware that was the phone not to try to downgrade and after it I install the downgrade version through TWRP.
But I am not sure for this because has passed more then 8 months.
wolfu11 said:
You are now stuck on Brightpoint firmware that is not for the unlocked version. Your best bet is to follow the instruction on this thread.:
https://forum.xda-developers.com/lg-g5/development/stock-rs988-11c-rom-flashable-zips-imgs-t3612358
11D has the bootloader mode you can get that from here:
https://forum.xda-developers.com/lg-g5/development/stock-rs988-11d-rom-flashable-zips-imgs-t3623199
Don't forget to thank autoprime.
Click to expand...
Click to collapse
Hi Brother,
I have and LG G5 RS988 (Full Stock + No Root), so it was in RS988 21D Andorid 7.0 Firmware
I wanted to downgrade it, so I downloaded RS988 11C Android 6.0 KDZ file and tried to flash it through LG UP but it stucked at 10% and gave an error, and device was soft bricked So, I had to download the RS988 10H Brightpoint firmware which luckily got me out of bricked state and firmware is running fine, But i did some research and got to know that I cannot unlock my bootloader in this Brightpoint firmware..
So now i want to unlock my bootloader, what should I do now or is there any way to somehow go to RS988 11C ????
perniteo said:
Hi! Thanks for the post!
I ran into exactly same problem. Any luck downgrading to RS98811c or getting rid of Brightpoint? I wasn't able to flash anything except for RS98810h_01_0303
Click to expand...
Click to collapse
Hi Bro!
Were U able to get rid of Brightpoint or able to downgrade to RS98811c??
HyperXG said:
Hi Brother,
I have and LG G5 RS988 (Full Stock + No Root), so it was in RS988 21D Andorid 7.0 Firmware
I wanted to downgrade it, so I downloaded RS988 11C Android 6.0 KDZ file and tried to flash it through LG UP but it stucked at 10% and gave an error, and device was soft bricked So, I had to download the RS988 10H Brightpoint firmware which luckily got me out of bricked state and firmware is running fine, But i did some research and got to know that I cannot unlock my bootloader in this Brightpoint firmware..
So now i want to unlock my bootloader, what should I do now or is there any way to somehow go to RS988 11C ????
Click to expand...
Click to collapse
Wow sorry it's been years. I think your best bet is to follow that link that you "d me on and go to 11D cause that has the boot loader mode but it's been so long Not sure they're still available sorry.
wolfu11 said:
Wow sorry it's been years. I think your best bet is to follow that link that you "d me on and go to 11D cause that has the boot loader mode but it's been so long Not sure they're still available sorry.
Click to expand...
Click to collapse
Thanks for answering bro, I've solved my issue.........
hi v10 folks,
just bought this v10 mobile 3 days before. it came with 5.1 android version, so thought of upgrading it and found some weird observations.
1. on connecting mobile to LG Bridge, model shows as H901 but update shows as F600S30D :crying:
2. downloaded lg phone info app and saw the provider name as SK Telecom
i have attached three screenshots of my mobile phone. is this a genuine t mobile version ? what needs to be done to upgrade my phone to Nougat ??? instead of bricking my phone thought of taking your suggestion guys
thanx in advance
Do NOT use LG Bridge, or you will brick your phone. Dunno where you got your phone, but it has an F600 IMEI, so LG Bridge thinks you need F600 firmware.
There is a v20L KDZ floating around here somewhere. Grab it, and put your phone in download mode (pull the battery / put the battery back in / hold volume up / plug USB cable in -- you don't have to hit the power button). Once you are in download mode, you can flash the KDZ with LG UP. That will get you to MM 6.0.1 which is still rootable using the dirtycow method (if you care about rooting). If you don't care about rooting, I am uploading the v30b Nougat KDZ right now. It is not rootable with any currently known methods. If you do want root, root on v20L, and then I will also be posting an update.zip that will take you to v30b and keep root.
-- Brian
runningnak3d said:
Do NOT use LG Bridge, or you will brick your phone. Dunno where you got your phone, but it has an F600 IMEI, so LG Bridge thinks you need F600 firmware.
There is a v20L KDZ floating around here somewhere. Grab it, and put your phone in download mode (pull the battery / put the battery back in / hold volume up / plug USB cable in -- you don't have to hit the power button). Once you are in download mode, you can flash the KDZ with LG UP. That will get you to MM 6.0.1 which is still rootable using the dirtycow method (if you care about rooting). If you don't care about rooting, I am uploading the v30b Nougat KDZ right now. It is not rootable with any currently known methods. If you do want root, root on v20L, and then I will also be posting an update.zip that will take you to v30b and keep root.
-- Brian
Click to expand...
Click to collapse
My goodness, thanks for the prompt reply buddy, you saved my @SS im seriously not worried for root or bootloader unlock. im ok with stock nougat without root. so which kdz i need to flash ? im confused
As far as I know, no one has uploaded the Nougat KDZ yet, so I am in the process of uploading it. Google drive is being REAL slow. Since you don't care about root, you can use the same method that I described above (get into download mode, and use LG UP to flash the KDZ). I will make a post just a soon as it finishes uploading.
You might want to take this time to be SURE that you don't want root, because once you flash Nougat, there will more than likely never be a way to root this phone unless another exploit in the Linux kernel can be found...
-- Brian
runningnak3d said:
As far as I know, no one has uploaded the Nougat KDZ yet, so I am in the process of uploading it. Google drive is being REAL slow. Since you don't care about root, you can use the same method that I described above (get into download mode, and use LG UP to flash the KDZ). I will make a post just a soon as it finishes uploading.
You might want to take this time to be SURE that you don't want root, because once you flash Nougat, there will more than likely never be a way to root this phone unless another exploit in the Linux kernel can be found...
-- Brian
Click to expand...
Click to collapse
mine is running nougat. but after a warm war with the qualcomm 9008 mode
@SandyKick I uploaded the KDZ in this thread.
-- Brian
runningnak3d said:
@SandyKick I uploaded the KDZ in this thread.
-- Brian
Click to expand...
Click to collapse
hi bro, @runningnak3d
device shows like this when i connected to my linux machine LGF600S16564708 (adb devices). so can i flash this H90130B KDZ ?
SandyKick said:
hi bro, @runningnak3d
device shows like this when i connected to my linux machine LGF600S16564708 (adb devices). so can i flash this H90130B KDZ ?
Click to expand...
Click to collapse
No if you update h90130b your phone will be a hardbrick.
You have to upgrade F600S30d But you might lose the network !!!
@SandyKick If you can return that phone for an exchange, you might want to. As @dodo73 said, (in not so many words) you are boned. You are going to have to take a risk either way, but the safest route since adb sees the device as an F600, is to flash the F600 firmware. If you lose network, you can then try flashing the H901 modem. Let us know how it goes, but you are probably going to have to do SOME kind of fixup -- it will not be a clean flash / upgrade / happy phone
EDIT: If you flash the F600 firmware and brick your phone, that is also easy to fix -- and you will know that you DO need the H901 firmware.
runningnak3d said:
Do NOT use LG Bridge, or you will brick your phone. Dunno where you got your phone, but it has an F600 IMEI, so LG Bridge thinks you need F600 firmware.
There is a v20L KDZ floating around here somewhere. Grab it, and put your phone in download mode (pull the battery / put the battery back in / hold volume up / plug USB cable in -- you don't have to hit the power button). Once you are in download mode, you can flash the KDZ with LG UP. That will get you to MM 6.0.1 which is still rootable using the dirtycow method (if you care about rooting). If you don't care about rooting, I am uploading the v30b Nougat KDZ right now. It is not rootable with any currently known methods. If you do want root, root on v20L, and then I will also be posting an update.zip that will take you to v30b and keep root.
-- Brian
Click to expand...
Click to collapse
i have same model and problem with my phone is that it is not recognised my lg up,,, lgup keep on saying unknown modell please help me if you have any fix for it
@hapyfaroq What does adb say? If you plug your phone in, and type adb devices, what is the output?
-- Brian
hapyfaroq said:
i have same model and problem with my phone is that it is not recognised my lg up,,, lgup keep on saying unknown modell please help me if you have any fix for it
Click to expand...
Click to collapse
now im facing the same problem.... everything is in korean in download mode mobile not recognizing in LG UP :crying::crying:
read this thread by @shadi47pk - https://forum.xda-developers.com/lg-v10/general/lg-v10-f600s-conversion-to-t3549884
i think octoplus box is required to get working
@SandyKick as long as you have download mode, you can fix your phone without needing a jtag box. What KDZ did you flash / how did you flash it to get in the condition you are in?
-- Brian
SandyKick said:
now im facing the same problem.... everything is in korean in download mode mobile not recognizing in LG UP :crying::crying:
read this thread by @shadi47pk - https://.xda-.com/lg-v10/general/lg-v10-f600s-conversion-to-t3549884
i think octoplus box is required to get working
Click to expand...
Click to collapse
IT took 2 hrs to figure out what was the real problem... real problem, with lg up is the common folder ( which is related to the model of the phone) so follow this link for lgup configuration.
https://www.androidsage.com/2016/04/12/update-t-mobile-lg-v10-android-6-0-marshmallow-h90120e-lgup/
and what i need from you is: Which link did you use to upgrade to MM (v20L link?) Thanks in advance.
runningnak3d said:
@SandyKick as long as you have download mode, you can fix your phone without needing a jtag box. What KDZ did you flash / how did you flash it to get in the condition you are in?
-- Brian
Click to expand...
Click to collapse
nope, i didnt flashed anything. installed LGUP exactly mentioned in this post - https://forum.xda-developers.com/lg-v10/general/guide-lg-v10-stock-firmware-to-stock-t3224170
unknown model is being shown in LG UP.
hapyfaroq said:
IT took 2 hrs to figure out what was the real problem... real problem, with lg up is the common folder ( which is related to the model of the phone) so follow this link for lgup configuration.
https://www.androidsage.com/2016/04/12/update-t-mobile-lg-v10-android-6-0-marshmallow-h90120e-lgup/
and what i need from you is: Which link did you use to upgrade to MM (v20L link?) Thanks in advance.
Click to expand...
Click to collapse
THANKS FOR THE TIP BRO, just bought the phone 3 days back. its still with 5.1 android version. current firmware h90110o. once lgup detects my phone will try flashing F600S30D kdz.
V20L link required
runningnak3d said:
@SandyKick as long as you have download mode, you can fix your phone without needing a jtag box. What KDZ did you flash / how did you flash it to get in the condition you are in?
-- Brian
Click to expand...
Click to collapse
Please provide correct link for the kdz as i have tried to flash F600S20l_00_0503.kdz but lgup says wrong kdz.
hapyfaroq said:
Please provide correct link for the kdz as i have tried to flash F600S20l_00_0503.kdz but lgup says wrong kdz.
Click to expand...
Click to collapse
try here: i downloded the nougat version.
https://lg-firmwares.com/lg-f600s-firmwares/
SandyKick said:
try here: i downloded the nougat version.
https://lg-firmwares.com/lg-f600s-firmwares/
Click to expand...
Click to collapse
I dont think going straight from 5.1.1 to nougat is a good idea. And after 1 hr of download if lg up is going to say incorrect kdz then why time waste
@SandyKick first we have to upgrade it to 6.0 to see everything goes welll then decide to upgrade it to 7.0
I have been searching for v20L kdz link but which model it is the huge problem
as we can not flash H901 kdz.
f600L?
F600s?
F600K?
There are three model with several updates. :/ Pretty confusing right.
hapyfaroq said:
I dont think going straight from 5.1.1 to nougat is a good idea. And after 1 hr of download if lg up is going to say incorrect kdz then why time waste
@SandyKick first we have to upgrade it to 6.0 to see everything goes welll then decide to upgrade it to 7.0
I have been searching for v20L kdz link but which model it is the huge problem
as we can not flash H901 kdz.
f600L?
F600s?
F600K?
There are three model with several updates. :/ Pretty confusing right.
Click to expand...
Click to collapse
if you see my post here - https://forum.xda-developers.com/showpost.php?p=73087083&postcount=7
in the scrrenshot you can see mine is F600S model. try in linux terminal (adb devices) you can come to know whether it is L / S / K model
Lg g6 KDZ pulled from Lg bridge for Manual update Who did not receive it via OTA.
Its meant for only Lg g6 H873 Canadian Version (Unlocked)
This KDZ does not support erase partition or refurbished mod on LGUP.
What's in the update?
Security update Feb 2019
Instructions:
Download KDZ
Install the ADB LG Drivers.
Download and Install LGUP Uppercut
Download and Install LG UP
Power off your phone
Connect it with your windows PC and press Volume Up button
Run Uppercut
select upgrade in LGUP
Select the KDZ
And flash
DO not change other settings.
Download LInk
Uppercut: https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
KDZ: https://mega.nz/#!uBpjWAQA!kdQX032mM3gvh1lP0MvU2s9YmL59mJw7xCwg8dr_RMo
NOTE: I or XDA is not responsible for any damage to your phone
Thanks....got a different link other than Mega?
Matt
https://lg-firmwares.com/downloads-file/18272/H87320i_00_OPEN_CA_OP_0204.kdz
nash211 said:
https://lg-firmwares.com/downloads-file/18272/H87320i_00_OPEN_CA_OP_0204.kdz
Click to expand...
Click to collapse
Thanks :good::good:
Matt
what if i dont use ?
What if i dont use uppercut and directly use LGUP
Thank you my man, I needed this
WiFi Calling on Canadian Variant
I have the unlocked Canadian H873 and it doesn’t have WiFi calling which I desperately need as reception isn’t good in my area. Is there any firmware I could flash it with to gain that ability.
Thanks for uploading this! In the process of flashing, looks like its going well so far.
What's new in this update
Am on H-87320C can I update to H-87320i directly
Hi was your update successful? and what version of software where you in before update?
Hi, i have a LG G8X and i need to flash a brand free firmware. It's my first LG, I tried searching the web and found LGUP to use with UPPERCUT.
The problem is that it crashes at 4%.
Any solution?
Magic Sjeorge said:
Hi, i have a LG G8X and i need to flash a brand free firmware. It's my first LG, I tried searching the web and found LGUP to use with UPPERCUT.
The problem is that it crashes at 4%.
Any solution?
Click to expand...
Click to collapse
The LGUP needs Patched *.dll file to work which is not available at this time