Hi, I am unfortunate enough to live in a place that still uses Daylight savings time. Yet another effect...today i woke up, and my watch read 6:00. When I pressed the top button to turn on the backlight and effectively wake the watch, it then read 5! The sleep mode still reads one hour ahead. Is this a bug or preference I've missed?
Try restarting your watch, that did the trick for me.
thanks...i did both watch and phone....now back in action!
Yeah, that was the feature not bug and it's gone after reboot
Sent from my XT1635-02 using Tapatalk
Related
I have the problem, my A70 is not waking up from Deep Sleep anymore.
After a while with screen off I press the power button and the screen stays black.
Only a reset brings the device back to life.
As far as I know it is a known problem, but search does not work.
Is there any solution for it?
How can I deactivate Deep Sleep permanently?
I only have the Deep Sleep On/Off option in Energy Options but there should be an option where the time before the device goes to deep Sleep can be adjusted, but I don't find it.
Disabling Deep Sleep with the button mentioned above does not help.
With most it is connected to the display light dimmed below 30%.
There is no time setting for deepsleep.
Is there an app for automatic display dimming?
Or an App, where the settings can be set so that 30% on Archos equals 0% on the App (100% == 100%)?
One more THing:
I installed the App Wake Lock:
https://market.android.com/details?id=eu.thedarken.wl&feature=search_result
I set the wake lock to Partial Wake Lock, and got a Freeze.
Is this normal?
I thought Wake Lock should prevent going to deep sleep?
It would be interesting to check whether the device is actually not turning on, or simply not turning the LCD on. One way to check would be to perform some action that plays a sound or something.
It would also be interesting to see if you can connect via adb and see what events, if any, show up in the log when you press the power button.
Could you explain, what is adb?
Never heard of it
See this: http://developer.android.com/guide/developing/tools/adb.html
This is probably fixed with an option in SuperDim 1.51dev2. See this thread.
I'm running stock, and I've found the screen won't automatically turn off while charging. 53 seconds after last touching the screen it will dim (when not charging it turns off at 60 seconds as it should), but will never turn off or lock as long as it is plugged in.
I've only installed these apps: audible, Facebook, pandora, speed test, and swift key. All updates installed.
This problem even happens after a battery pull at the lock screen before I've touched the phone, it just dims the lock screen.
There is an option in settings somewhere for "Keep screen awake while charging".
On ICS its in the development submenu - I can't remember exactly where it was on GB..
If you use a power control widget, you can change the screen timeout options.
I recommend Power Controls by Painless Death.
https://play.google.com/store/apps/details?id=com.painless.pc&feature=nav_result#?t=W251bGwsMSwyLDNd
Best free widget I've found.
Or just press the lock/power button manually once phone is plugged in?
Sent from my GT-I9100 using xda app-developers app
a.mcdear said:
There is an option in settings somewhere for "Keep screen awake while charging".
On ICS its in the development submenu - I can't remember exactly where it was on GB..
Click to expand...
Click to collapse
Great thanks! I found it under applications/development. Verizon sent me a new phone today because they didn't know how to stop it, sad.
thechristobol said:
Great thanks! I found it under applications/development. Verizon sent me a new phone today because they didn't know how to stop it, sad.
Click to expand...
Click to collapse
LOL. Oh well, it will just get sold to someone else in a few months! No big loss.
The last two nights I've woken up and my display has been on while charging. I unplugged it and tapped the power button to shut off the screen. A few hours later I woke up and the screen is on again. It seems it comes on when it receives a notification and then it doesn't want to time out. Screen timeout is set to 1 minute and smart stay is off. Any ideas? I have no profile or power altering apps.
Did you by chance turn power save mode off under wifi setting *#0011* ? I did that and then noticed the screen stayed on all the time. If you never touched those settings then disregard
Sent from my SGH-I747M using xda app-developers app
I never touched those setting. Thanks
I would turn the phone off and pull the battery. Sounds dumb but it can fix stupid little issues like this. Otherwise I'd to a hard reset and see if that helps. If not then return it and get a new one if you can. I have not had any issue like this yet.
Lock screen options too...Make sure they are correct.
Yeah pulling the battery fixes it temporarily but then it happens again. I'm thinking it might be an app I have installed but I have the same apps installed on my One X and I don't have the issue there. I can exchange it, I work at the AT&T Store but I think it's a software issue. I might try the factory reset.
Hi All,
I got this watch for it's design and look, when I read about an AOD function and the way people react to this function it was a plus to buy it.
Than I got confused about using a AOD. You can see the time with the AOD but as soon that you turn the wrist, the regular watch face turn on, so you barely see the AOD screen.
I tried to turn off the wrist action to keep only the AOD all the time, but it doens't stay on 24 hours, I notice that when I got to bed the AOD was turn off and will not turn on.
thank you.
MikeViller said:
Hi All,
I got this watch for it's design and look, when I read about an AOD function and the way people react to this function it was a plus to buy it.
Than I got confused about using a AOD. You can see the time with the AOD but as soon that you turn the wrist, the regular watch face turn on, so you barely see the AOD screen.
I tried to turn off the wrist action to keep only the AOD all the time, but it doens't stay on 24 hours, I notice that when I got to bed the AOD was turn off and will not turn on.
thank you.
Click to expand...
Click to collapse
The AOD will turn off if the watch detects there's no movement to save battery power. I think that the interval is 5 minutes.
Pressing a button will turn the watch on and then when screen goes off, the AOD will show up again.
Surf_Dude said:
The AOD will turn off if the watch detects there's no movement to save battery power. I think that the interval is 5 minutes.
Pressing a button will turn the watch on and then when screen goes off, the AOD will show up again.
Click to expand...
Click to collapse
That's what I figured out, it would be excellent if the AOD could turn on back by itself when you wake up . :good:
thank you Surf_Dude.
I wounder if their is a place were you can ask or discuss with Amazfit (Huami) for add-ons like this?
MikeViller said:
That's what I figured out, it would be excellent if the AOD could turn on back by itself when you wake up . :good:
thank you Surf_Dude.
I wounder if their is a place were you can ask or discuss with Amazfit (Huami) for add-ons like this?
Click to expand...
Click to collapse
There is a forum where you can discuss/request things, but it's in Chinese and the moderator(s) is not very helpful, all that he does is to say people to check their private messages https://bbs.huami.com/
Accessed it with chrome(setting to translate Chinese to English), but can't login with mi account to post, I get an error. Guess outsiders aren't welcome.
Hi,
I have this issue with my watch: sometimes I can light-up the watch by touching the display and most of the times this doesn't work. Is this a feature (when it works) or a bug (when doesn't work)?
Thank you!
Just few seconds after your screen goes off, it would get back on by tapping on screen. In other cases you couldn’t make it on by tapping.
I just hop on this thread about screen light.
I trying to find the setting to turn off the screen while on running activity. I notice the screen is light on entire running activity until complete. I had already enable wrist lift option to turn on the screen when i need checking the running stats.
Anyway find the setting to turn it off or perhaps sleep mode. Thank you in advance.
There is no such option in Zepp yet. Hopefully they will add it, since screen-on is very battery-consuming.
casper709394 said:
I just hop on this thread about screen light.
I trying to find the setting to turn off the screen while on running activity. I notice the screen is light on entire running activity until complete. I had already enable wrist lift option to turn on the screen when i need checking the running stats.
Anyway find the setting to turn it off or perhaps sleep mode. Thank you in advance.
Click to expand...
Click to collapse
You can turn it off by going into workout settings.
If you disable light on lift, touch to light up display will be also disabled. At least it happens on mine.