Cannot Flash Rom / Restore - Error 7, Error 1001, Cannot mount System - Xiaomi Redmi Note 4 Questions & Answers

Hey everybody,
I was on LOS 15.1 for a rather long time and I wanted to try RR, so as usual I backed up my system and tried to flash the RR-rom.
It did not work at all and I got several errors among which error 7 and the unability to mount system partition were the most prominent.
The device got bricked several times but I got it back to life with MiFlashTool, running either MIUI 8.5 or MIUI 9.
The strange thing is that even after flashing the MIUI-img - and basically bringing the device back to its factory firmware - I could not flash a rom.
I tried several recoverys; the latest TWRP, the TWRP linked in the LOS15.1 thread and OrangeFoxRecovery. None of them would work. I wiped all partition, nothing worked. I got different errors shown, most of them were error 7 or not being ablke to mount system, as stated before.
Right now I am back to MIUI and rooted it, which worked from OrangeFox, but I actually would like tzo run a custom rom again.
Any idea what I could do?
Cheers!

Noone who has an idea why it would not work?
I thought that after flashing via Flashtool the phone would be as good as new and all prioir changes would be gone? Wha can I not flash anything via recovery and get erros?
Or are there different versions of Orange Fox Recovery? RR would be treble, so I would need a treble recovery.
Cheers!

Have you tried to format internal storage?
If not backup data in sdcard or pc and format it using recovery.
Are you using trble supported recoveries?
Did you encrypted your data while using Lineage OS?

Hey,
well, yes, I encrypted data but since reinstalling MIUI via Flashtool this is gone. And I thought that this should be enough and reflashing it via MiFlash is like a factory reset? Is there anything I did not consider?
After Flashtool did not do the trick, wiped everything but External memory in TWRP, no kelp either.
I also did the normal wipe (where you dont have to choose which partition), this did not help.
As I said, I am currently on the latest OrangeFox Recovery but I also tried the latest TWRP and the TWRP in the LOS 15.1-Thread, which did not help.
To my knowledge all of the are treble recoverys?
I also tried to restore a vackup of LOS which did not work...
I flashed

wurst_wasser said:
Hey,
well, yes, I encrypted data but since reinstalling MIUI via Flashtool this is gone. And I thought that this should be enough and reflashing it via MiFlash is like a factory reset? Is there anything I did not consider?
After Flashtool did not do the trick, wiped everything but External memory in TWRP, no kelp either.
I also did the normal wipe (where you dont have to choose which partition), this did not help.
As I said, I am currently on the latest OrangeFox Recovery but I also tried the latest TWRP and the TWRP in the LOS 15.1-Thread, which did not help.
To my knowledge all of the are treble recoverys?
I also tried to restore a vackup of LOS which did not work...
I flashed
Click to expand...
Click to collapse
When you reply quote, I didn't get notifications for your reply.
Your bootloader is unlocked and you installed Twrp recovery.
Try copying Rom zip to SD card and wipe system, data, cache, dalviks cache, internal storage (exclude sd card off course). Then install it.
It should work

As I said, I did all of this, yet it does not work.
After wiping I tried to flash RR rom...
I get "Patching system image unconditionally...
Then I get E1001: Failed to update system image. (in white)
Updater process ended with: ERROR 7 (in red)
Error installing zip file 'patch...' (in red)
Updating partition details (in white)
Failed to mount '/system' (Invalid Argument) (in red).
As I said, that happens with different recoverys and different roms (treble and non treble)

wurst_wasser said:
As I said, I did all of this, yet it does not work.
After wiping I tried to flash RR rom...
I get "Patching system image unconditionally...
Then I get E1001: Failed to update system image. (in white)
Updater process ended with: ERROR 7 (in red)
Error installing zip file 'patch...' (in red)
Updating partition details (in white)
Failed to mount '/system' (Invalid Argument) (in red).
As I said, that happens with different recoverys and different roms (treble and non treble)
Click to expand...
Click to collapse
Are you sure the Rom you installating is for your device because error 7 occured if the rom you are trying install is not for your device.

Yes, of course, it was the correct ROM. Before error 7 I got error 1001 and I guess this was the initial problem.
My guess it that the problem was the decrypted partition which I did not format in twrp in my first go. Every wipe and format afterwards somehow did not help...
Now after having flashed recovery and different roms 10 times and using miflash 10 times it worked and now I am on RR. Don't ask me what eventually did the trick.

wurst_wasser said:
Yes, of course, it was the correct ROM. Before error 7 I got error 1001 and I guess this was the initial problem.
My guess it that the problem was the decrypted partition which I did not format in twrp in my first go. Every wipe and format afterwards somehow did not help...
Now after having flashed recovery and different roms 10 times and using miflash 10 times it worked and now I am on RR. Don't ask me what eventually did the trick.
Click to expand...
Click to collapse
Great to know
I hated MIUI because of the bloatware and ads. Have fun using RR. If you want you can use Liquid Remix Pie its a great ROM.

Yes. I also did not like MIUI that much, that's why I was using Lineage before I wanted to try RR: Thanks for the advice for anothe rom.

i fix this issue by format data, not only wipe then restart the recovery and install the ROM, then finally it works !

Shojimeguro said:
i fix this issue by format data, not only wipe then restart the recovery and install the ROM, then finally it works !
Click to expand...
Click to collapse
How did you format? noob

Shojimeguro said:
i fix this issue by format data, not only wipe then restart the recovery and install the ROM, then finally it works !
Click to expand...
Click to collapse
If I format data, then I have to reboot into the recovery menu to be able to use data again. But this is impossible, because it gets stuck into the bootloop every time I try to reboot. Any other option to fix this error?
EDIT:
I could fix it myself:
1. MIUI latest version; flash with MiFlash.
2. flash TWRP with e.g. YUware
3. flash latest fw_vendor in TWRP
4. full update pixel expierence (NOT incremental) rom flash
5. Partitions/Data/Format
6. Reboot and ready to use

Related

Unable to install resurrection remix5.8.4

Hi,
I recently unlocked my bootloader after a really long time. I then proceeded to flash twrp and then flashed superSU and rooted my phone. I took a backup of my rom and then proceeded to install RR 5.8.4. I was given a error 7. Tried this method (https://forum.xda-developers.com/showthread.php?t=2522762) but then it gave me a error 6. Would someone help me out ?
Thx.
1) flash latest global developer MIUI ROM via MiFlash to updated firmware and to reset things if they messed up (watch out if you lock your bootloader while flashing, choosing the wrong .bat file);
2) after flash TWRP via fastboot;
3) boot TWRP and "advanced wipe" ALL partitions (except MicroSD if you have a MicroSD inserted and you want to keep its data);
4) reboot to recovery and install the RR .zip file (and the gapps .zip file if you use it);
5) after you boot into RR, you can then reboot to TWRP and install Magisk .zip to get root and other nice things.
Can i factory reset my device instead of flashing developer rom as the developer rom is quite big, around 1.4gb?
shalom170401 said:
Can i factory reset my device instead of flashing developer rom as the developer rom is quite big, around 1.4gb?
Click to expand...
Click to collapse
If you've TWRP installed at the moment then try this :
Boot to TWRP
Take a nandroid backup (just incase)
Wipe > advanced wipe > swipe to confirm
Flash firmware if you're coming from marshmallow based MIUI
Flash ROM & Gapps
Reboot
If you still get errors, probably corrupted zip. Try Re-downloading the zip.
shalom170401 said:
Can i factory reset my device instead of flashing developer rom as the developer rom is quite big, around 1.4gb?
Click to expand...
Click to collapse
You can try. Remember that if you download the full MIUI ROM, you should follow this guide http://en.miui.com/a-234.html
You can also upgrade the firmware without downloading the full ROM, from here https://forum.xda-developers.com/re.../firmware-firmware-update-2017-08-04-t3651537
Will try soon and reply
Even after flashing the firmware, i get the same error 7
I have downloaded this rom (https://www.google.co.in/amp/s/foru...nt/rom-resurrectionremix-5-8-2-t3567023/amp/) and flashed twrp using this guide (http://en.miui.com/thread-536180-1-1.html)
Maybe this is a stupid question, but your phone has MediaTek chipset or Qualcomm chipset?
I'm pretty sure it is qualcomm as the cpu speed is 2.0ghz
Now, i get this error and status error 7.
What should i do?
Where you can format all partitions, you can fix them too.
It looks like your /data is using f2fs, you should fix it converting the partition in ext4 (in official TWRP it's not possible to use f2fs).
Check all partitions, not only /data, to be formatted as ext4
So, what r the steps i should follow?
And btw, is there any unofficial twrp which i could use?
Enter TWRP, choose Wipe > Advanced Wipe
Check the box for "data"
Tap "change or repair file system"
Tap "Change file system"
Tap "ext4"
Swipe the button
Repeat for other partitions
I don't know if there are unofficial TWRP that support f2fs. Probably they exists, but you should also check if the default RR kernel supports f2fs, else you have to flash a custom kernel that supports f2fs.
Just one important question. During this process, if something weird happens ( like i get my phone soft bricked) and i got a nandroid backup. Will i be able to flash it successfully using twrp?
Yes, changing file system is a pretty safe operation (except for the erasing of the data inside the partition, as a normal format).
Flashing the backup or a full fastboot image will reset things back.
But it already shows it as ext4
Oh mahn, it still doesn't resolved?
Flash official TWRP via fastboot mode, skip this step if your already on official TWRP
Boot to TWRP
Wipe
Flash cm14.1 mido firmware
Flash Rom
Flash Gapps
??
Reboot
Note that, you should try Re-downloading all the things, like Rom / Gapps
Dude, i am unable to flash the rom due to cant install this package error and status error 7 !
shalom170401 said:
Dude, i am unable to flash the rom due to cant install this package error and status error 7 !
Click to expand...
Click to collapse
Yeah man, that's what I'm saying, you should try installing cm14.1 firmware first, then Rom..
Even after flashing the firmware, i get the same errors

Trying to install ResurrectionRemix, causes bootloop

So here is my situation: I have a 3GB kenzo model with 6.3.24 EU ROM and ZCX TWRP 3.0.0-0. Of course bootloader in unlocked. Since the TWRP is pretty old, I updated it to RedWolf V3.1.
What I did:
Wipe: Dalvik/System/Data/Cache
Install Beta 7.9.22 or Stable 8.5.6.0 Kenzo firmware (tried with both)
Install RR image: RR-N-v5.8.5-20170924-kenzo-Final.zip
Install open gapps ARM64 7.1 (or not)
Wipe caches (also tried without wiping it)
Reboot
Bootloop
I know the first boot can take some time, so I let it run for 30+ minutes, still, only bootloop happened. Tried it a couple times, changing firmware, wiping caches at the end, ditching gapps etc. Images checked for md5 checksum on the phone, they are not corrupted. I was able to restore the EU ROM, but I really want to try out ResurrectionRemix. What could possibly the problem be?
Same here...i flash all nougat rom and got bootloop..now i stay in mm only...:C
Reflash newest stock image, than hack the emmc bootloader of it and try again
reemar said:
Reflash newest stock image, than hack the emmc bootloader of it and try again
Click to expand...
Click to collapse
So you mean to flash the latest stock ROM, won't it remove TWRP and lock the bootloader? And how to "hack" the emmc bootloader? Sorry, I'm a newbie
Just wait for at least 15 minutes after flashing
DdroidTHEGAMER said:
Just wait for at least 15 minutes after flashing
Click to expand...
Click to collapse
What do you mean, wait in TWRP for 15 minutes or when booting up the OS? As I said, I waited for 30+ minutes while it booted up.
Try installing ROM without flashing the firmware
Minions007 said:
Try installing ROM without flashing the firmware
Click to expand...
Click to collapse
That was the first thing I did (I didn't know a firmware was needed so I only flashed the RR ROM). Same bootloop
You could try to format data partition. Then wipe system,data,cache,dalvik cache and internal partition. After that Copy actually firmware, rom and opengapps arm64 pico in internal memory (Download all files again. Maybe archiv was damaged). Then flash firmware, rom, gapps and do wipe Cache/dalvik and reboot. Then report.
SpeRator said:
You could try to format data partition. Then wipe system,data,cache,dalvik cache and internal partition. After that Copy actually firmware, rom and opengapps arm64 pico in internal memory (Download all files again. Maybe archiv was damaged). Then flash firmware, rom, gapps and do wipe Cache/dalvik and reboot. Then report.
Click to expand...
Click to collapse
Did it, same result. Wiped everything, copied zips to internal storage, flashed from there and boom, bootloop
Hmm strange. You could test a good modified rom of rr.
Try this Rom:
https://www.androidfilehost.com/?fid=673791459329049490
And these Gapps:
https://www.androidfilehost.com/?fid=673791459329049438
If it all not Work, you have to flash actually official Rom to restore all with edl.
I have the exact same problem. Cant flash any ROM without getting bootloop. The bootloop though isnt a standard one, i think. I get the logo of the ROM and the phone starts to give Tiny vibrations in regular periods of time. I also left the phone for a long time hoping it'll eventualy boot. No luck. Tried flashing stock ROM with miflashtool and edl. Didnt help as well. I wonder if it could be the fault of any previous roms i had installed.
Twrp:
-are you sure you are not in read mode? Change to writemode.
-All relevant partitions mounted?
SpeRator said:
Twrp:
-are you sure you are not in read mode? Change to writemode.
-All relevant partitions mounted?
Click to expand...
Click to collapse
Changed to writemode.. default options selected in the mounts screen.
unable to flash any Nougat roms- stuck in boot animation.
is it because the bootloader was unlocked unofficially via lollipop fastboot ROM 7.1.8??
All right, got it working.
I flashed the latest official MIUI ROM with the official flashing tool with the option "clear all". Then I had to open the bootloader again, then flash TWRP, then flash RR, and it works! Looks like something was wrong with the previous installation, the clearing everything did the job.
Were your bootloader unlocked officially?
aldhi said:
Were your bootloader unlocked officially?
Click to expand...
Click to collapse
Unlocked Unofficially via this method https://www.youtube.com/watch?v=2FmaCdnLi58
tonyrulez said:
So here is my situation: I have a 3GB kenzo model with 6.3.24 EU ROM and ZCX TWRP 3.0.0-0. Of course bootloader in unlocked. Since the TWRP is pretty old, I updated it to RedWolf V3.1.
What I did:
Wipe: Dalvik/System/Data/Cache
Install Beta 7.9.22 or Stable 8.5.6.0 Kenzo firmware (tried with both)
Install RR image: RR-N-v5.8.5-20170924-kenzo-Final.zip
Install open gapps ARM64 7.1 (or not)
Wipe caches (also tried without wiping it)
Reboot
Bootloop
I know the first boot can take some time, so I let it run for 30+ minutes, still, only bootloop happened. Tried it a couple times, changing firmware, wiping caches at the end, ditching gapps etc. Images checked for md5 checksum on the phone, they are not corrupted. I was able to restore the EU ROM, but I really want to try out ResurrectionRemix. What could possibly the problem be?
Click to expand...
Click to collapse
Backup all of your data from internal storage and flash latest fastboot developer ROM and setup it. This will fix all issues regarding ROMs, zips, bootloops and firmware and any other. After that flash latest ZCX recovery as RedWolf recovery causes problems for flashing ROMs and zips as per my experiance. Then simply flash RR and gapps and boot and wait for 15 minutes and till then don't restart device.

Stuck with recovery and no ROM (OS) - MiPad 1

Hi,
I was installing the lIneage OS 14.1 Mocha and I came across a strange problem. The TWRP and TWRP img installed well, but when I wiped Cache and system and tried to install the Lineage os 14.1 rom, it failed and I was left with a MiPad without an OS. I guess it failed because I did not partition the system before I installed the Rom.
The tablet is turned off and I am not sure hot to get to the recovery of what to do to install a ROM. Could someone please help me with what to do next
Hold Vol up + power button till you see the Mi screen to get to recovery. Go to http://en.miui.com/download-229.html and download Xiaomi's official stock ROM.
cooldude5500 said:
Hold Vol up + power button till you see the Mi screen to get to recovery. Go to http://en.miui.com/download-229.html and download Xiaomi's official stock ROM.
Click to expand...
Click to collapse
I followed this thread http://en.miui.com/thread-118294-1-1.html to merge system partitions but now i am stuck in mi logo. twrp says no OS and i can not wipe system partition or restore from backup as it says 'E:device block not found, unable to mount /system' . Can i flash xiaomi's stock rom to solve this problem?
oreki9 said:
I followed this thread http://en.miui.com/thread-118294-1-1.html to merge system partitions but now i am stuck in mi logo. twrp says no OS and i can not wipe system partition or restore from backup as it says 'E:device block not found, unable to mount /system' . Can i flash xiaomi's stock rom to solve this problem?
Click to expand...
Click to collapse
I tried to flash stock rom but it failed.
oreki9 said:
I tried to flash stock rom but it failed.
Click to expand...
Click to collapse
Sorry, I've no clue what the issue is. I noticed that the ROM seems to be on the external SD, maybe try putting it on the internal might fix it? Or maybe or can try to flash mocha_repartition_stock, wipe, and then flash the stock ROM?
cooldude5500 said:
Sorry, I've no clue what the issue is. I noticed that the ROM seems to be on the external SD, maybe try putting it on the internal might fix it? Or maybe or can try to flash mocha_repartition_stock, wipe, and then flash the stock ROM?
Click to expand...
Click to collapse
the problem is i am unable to flash any file as it gives 'unable to mount /system' error. The system partition shows 0 size. Should i first repair it?
oreki9 said:
the problem is i am unable to flash any file as it gives 'unable to mount /system' error. The system partition shows 0 size. Should i first repair it?
Click to expand...
Click to collapse
Maybe you can try flashing/re-flashing the partition scripts? Or try flashing http://en.miui.com/thread-328108-1-1.html instead, it's a slightly more up to date version of the ROM.
Why do you "restore" when trying to flash?
Palm Trees said:
Why do you "restore" when trying to flash?
Click to expand...
Click to collapse
i was using my nandroid backup to restore my system but it also failed.
oreki9 said:
i was using my nandroid backup to restore my system but it also failed.
Click to expand...
Click to collapse
Have you tried wiping everything?
Which rom are you trying to flash? (by whom, I mean)
Did you confirm re-partitioning was successful?
Palm Trees said:
Have you tried wiping everything?
Which rom are you trying to flash? (by whom, I mean)
Did you confirm re-partitioning was successful?
Click to expand...
Click to collapse
1. I did wipe cache,dalvik,system and data.
2. I tried to flash the stock rom found on the xiaomi website.
3. How can i confirm if repartitoning was succesfull if i cant boot into system? In twrp system partiton is showing 0 size.
---------- Post added at 06:45 PM ---------- Previous post was at 06:39 PM ----------
Can i flash cwm while in twrp ?
oreki9 said:
1. I did wipe cache,dalvik,system and data.
2. I tried to flash the stock rom found on the xiaomi website.
3. How can i confirm if repartitoning was succesfull if i cant boot into system? In twrp system partiton is showing 0 size.
Click to expand...
Click to collapse
Did you follow my guide? https://forum.xda-developers.com/mi-pad/how-to/guide-flash-twrp-merge-partitions-mi-t3611814
Palm Trees said:
Did you follow my guide? https://forum.xda-developers.com/mi-pad/how-to/guide-flash-twrp-merge-partitions-mi-t3611814
Click to expand...
Click to collapse
Didn't see your guide earlier. Now will try to flash your zip file and then a stock rom. Will it work? Also my system partiton is showing 0 size so unable to flash anything. so how can i flash the stock rom?Should i neglect the error and just reboot and hope it works?
oreki9 said:
Didn't see your guide earlier. Now will try to flash your zip file and then a stock rom. Will it work? Also my system partiton is showing 0 size so unable to flash anything. so how can i flash the stock rom?Should i neglect the error and just reboot and hope it works?
Click to expand...
Click to collapse
Give it a try and see what happens.
Palm Trees said:
Give it a try and see what happens.
Click to expand...
Click to collapse
Thanks it worked. The file i downloaded from the miui forum seems to be the problem. I flashed your zip and it succeeded and then i flashed the stock rom and everything worked. Really thanks. Plus the partitions are now merged Thanks again.
oreki9 said:
Thanks it worked. The file i downloaded from the miui forum seems to be the problem. I flashed your zip and it succeeded and then i flashed the stock rom and everything worked. Really thanks. Plus the partitions are now merged Thanks again.
Click to expand...
Click to collapse
No problem Glad it worked.
Hi,
I'm struck on MI logo. I'm on TWRP 3.1.1-0. I've installed miui_MIPADGlobal_V7.3.1.0.KXFMIDD_0d8dcf2bc3_4.4.zip, AOSPExt ROM, AICP, RR ROM but every time it struck on MI logo. All the ROMs are flashed smoothly without any error. I waited for some 30 min but nothing happened. I tried flashing via MIflashtool using flashboot rom but in MIFlash tool it showed 'error: Mismatching image and device'.
Please guide me.
Avee007 said:
Hi,
I'm struck on MI logo. I'm on TWRP 3.1.1-0. I've installed miui_MIPADGlobal_V7.3.1.0.KXFMIDD_0d8dcf2bc3_4.4.zip, AOSPExt ROM, AICP, RR ROM but every time it struck on MI logo. All the ROMs are flashed smoothly without any error. I waited for some 30 min but nothing happened. I tried flashing via MIflashtool using flashboot rom but in MIFlash tool it showed 'error: Mismatching image and device'.
Please guide me.
Click to expand...
Click to collapse
Did you flash stock miui_MIPADGlobal_V7.3.1.0.KXFMIDD_0d8dcf2bc3_4.4.zip using TWRP 2.8.4?
11. Your Mi Pad now boots into TWRP 2.8.4
12. In TWRP select ‘Wipe’ and choose ‘Cache, Data, System and Dalvik Cache’
13. After wiping, press ‘Install’ and flash the ‘Repartition_MI_Pad_1_2GB_zardMi3.zip’
14. Your Mi Pad boots back into TWRP as no OS is installed
15. Install miui_MIPADGlobal_V7.3.1.0.KXFMIDD_0d8dcf2bc3_4.4.z ip (there will be an error, just ignore it and let it finish). Reboot. Wait 5-10 minutes. The MIUI welcome screen will appear, complete the setup.
16. Install DiskInfo from Play Store to confirm your repartitioning was successful.
Palm Trees said:
Did you flash stock miui_MIPADGlobal_V7.3.1.0.KXFMIDD_0d8dcf2bc3_4.4.zip using TWRP 2.8.4?
11. Your Mi Pad now boots into TWRP 2.8.4
12. In TWRP select ‘Wipe’ and choose ‘Cache, Data, System and Dalvik Cache’
13. After wiping, press ‘Install’ and flash the ‘Repartition_MI_Pad_1_2GB_zardMi3.zip’
14. Your Mi Pad boots back into TWRP as no OS is installed
15. Install miui_MIPADGlobal_V7.3.1.0.KXFMIDD_0d8dcf2bc3_4.4.z ip (there will be an error, just ignore it and let it finish). Reboot. Wait 5-10 minutes. The MIUI welcome screen will appear, complete the setup.
16. Install DiskInfo from Play Store to confirm your repartitioning was successful.
Click to expand...
Click to collapse
Thanks. But the problem remains the same. It again struck on MI logo even after flashing through TWRP 2.8.4.
i too have same problem dont know what to do...i tried flashing through fastboot also even that didnt help..

Pocophone F1 no os after sideloading going wrong

Hey all, so it appears that I screwed my phone, I am not sure how.
I was running LineageOS, and wanted to update to Android 10 one, so I followed the steps, and I think I screwed the sideloading part, so... long story short now when rebooting from OrangeFox RecoveryProject it says no OS detected, and when it boots it says encryption unsuccessful, I tried wiping and installing DisableForceEncryption_Treble_v17.2 and restarting, and the same thing happens.
I tried to flash through recovery both, and did not work:
https://xiaomifirmwareupdater.com/firmware/beryllium/
https://xiaomifirmwareupdater.com/archive/vendor/beryllium/
And when trying to flash through miFlash it doesn't work:
I go to fastboot in poco, hit refresh in miflash, it shows a device in the list, but the phone goes dark with 'something key to shutdown` written in the top left corner and if I hit the flash button nothing happens.
Can anyone assist with that please?
kishikaisei said:
Hey all, so it appears that I screwed my phone, I am not sure how.
I was running LineageOS, and wanted to update to Android 10 one, so I followed the steps, and I think I screwed the sideloading part, so... long story short now when rebooting from OrangeFox RecoveryProject it says no OS detected, and when it boots it says encryption unsuccessful, I tried wiping and installing DisableForceEncryption_Treble_v17.2 and restarting, and the same thing happens.
I tried to flash through recovery both, and did not work:
https://xiaomifirmwareupdater.com/firmware/beryllium/
https://xiaomifirmwareupdater.com/archive/vendor/beryllium/
And when trying to flash through miFlash it doesn't work:
I go to fastboot in poco, hit refresh in miflash, it shows a device in the list, but the phone goes dark with 'something key to shutdown` written in the top left corner and if I hit the flash button nothing happens.
Can anyone assist with that please?
Click to expand...
Click to collapse
This happened to me when I accidentally deleted the OS when flashing the latest MIUI 11 build (using TWRP). THIS IS HOW I FIXED IT.
Find a full firmware of whatever you wanted to flash, either Lineage or MIUI 11. Then flash via your recovery (you said you have orangefox). Use an external sd card, external USB or HDD since you technically wouldn't have access to your internal data. After flashing, same process as most updates, clear cache and dalkiv. Then flash a newer DFE (if you still want to decrypt, there is a page here in xda with it. Or go to miui forums Happybuddhist, the mod there, made a new one prebuilt with Magisk). Then reboot into recovery to make sure you keep your custom recovery. Once booted to recov. Boot to system. Should fix the issue.
You could check my guide here on how to unbrick your pocophone:
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
mecoromeo said:
This happened to me when I accidentally deleted the OS when flashing the latest MIUI 11 build (using TWRP). THIS IS HOW I FIXED IT.
Find a full firmware of whatever you wanted to flash, either Lineage or MIUI 11. Then flash via your recovery (you said you have orangefox). Use an external sd card, external USB or HDD since you technically wouldn't have access to your internal data. After flashing, same process as most updates, clear cache and dalkiv. Then flash a newer DFE (if you still want to decrypt, there is a page here in xda with it. Or go to miui forums Happybuddhist, the mod there, made a new one prebuilt with Magisk). Then reboot into recovery to make sure you keep your custom recovery. Once booted to recov. Boot to system. Should fix the issue.
Click to expand...
Click to collapse
I tried that, now I am a step forward I think, I flashed the stock firmware I found, and installed the latest stock ROM, rebooted (doesn't say no os anymore), but the only thing I see is a DELETE ALL DATA button and at the bottom 'Encryption was interrupted and can't be completed. As a result, the data on your phone is no longer accessible.
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google account.'
Darklouis said:
You could check my guide here on how to unbrick your pocophone:
https://forum.xda-developers.com/poco-f1/how-to/unbrick-flashing-stable-rom-pocophone-t3901152
Click to expand...
Click to collapse
I have an issue with the MiFlash part, it seems that it doesn't work as I mentioned...
Aight all, formatting data partition to ext4 worked, now it is booting
kishikaisei said:
Aight all, formatting data partition to ext4 worked, now it is booting
Click to expand...
Click to collapse
Works now?
mecoromeo said:
Works now?
Click to expand...
Click to collapse
So I had an OS-less phone that don't get recognised in MiFlash, and I had orangeFox recovery.
The steps to fix were:
- Flash a full stock Firmware
- Flash the stock ROM
- Flash DFE
- Format data to ext4
- Reboot and it works
So thanks all for your help

S9+ Cant install Pixel Experience 13

I have flashed twrp wiped the phone, but when i try to install pixel experience i get Failed to mount '/system' and '/vendor' (invalid argument)
I have tried changing from ext4 to ext2 and back to ext4 again but it still doesnt work
Wipe Dalvik/ART, Cache, System, Data as before every rom install, if that doesn't work you will have to flash boot.img but don't do this with the restore method in twrp, only use the install button.
Mr.Nobody/Marox said:
Wipe Dalvik/ART, Cache, System, Data as before every rom install, if that doesn't work you will have to flash boot.img but don't do this with the restore method in twrp, only use the install button.
Click to expand...
Click to collapse
I have tried wiping them and installed it thru install button still didnt work
I tried installing Pixel Experience 12 as a last chance it worked without any problems
I guess my phone doesnt like it thanks for the help tho
okisijen said:
I tried installing Pixel Experience 12 as a last chance it worked without any problems
I guess my phone doesnt like it thanks for the help tho
Click to expand...
Click to collapse
Glad you work it out. Don't know about your phone but what i heard is in order to flash A13 rom you have to flash original A11 firmware on your phone.
Have a nice one!

Categories

Resources