Any one help me how I inable Camera2Api in Yu Ace
I rootet this device with Magisk
Help me any one port twrp for this device
Need also custom rom
rehan992 said:
Any one help me how I inable Camera2Api in Yu Ace
I rootet this device with Magisk
Click to expand...
Click to collapse
Plz Explain how did you root it...
I want install twrp on this device with miui rom
I ported TWRP for my Yu ace from Mi6a and perfectly flashed it but there's and error coming...
Failed to decrypt data .
Failed to mount '/cust' (Invalid Argument)
Simulating actions....
I want to First backup my stock rom with twrp so that if any thing goes wrong I can restore to stock but because of error I'm not able to make a backup
What to do ??????
rehan992 said:
Help me any one port twrp for this device
Click to expand...
Click to collapse
I have ported twrp for yu ace
rehan992 said:
Any one help me how I inable Camera2Api in Yu Ace
I rootet this device with Magisk
Click to expand...
Click to collapse
Terminal command:
setprop persist.camera.HAL3.enabled 1
setprop persist.vendor.camera.HAL3.enabled 1
setprop persist.camera.stats.test 5
setprop persist.vendor.camera.stats.test 5
joke19 said:
Terminal command:
setprop persist.camera.HAL3.enabled 1
setprop persist.vendor.camera.HAL3.enabled 1
setprop persist.camera.stats.test 5
setprop persist.vendor.camera.stats.test 5
Click to expand...
Click to collapse
Rooted with magisk boot patched IMG
Please send me twrp
Also my cell phone is dead help me
vikasrmourya;79272p485 said:
I have ported twrp for yu ace
Click to expand...
Click to collapse
Please send me the link of twrp really I neede
vikasrmrourya said:
Plz Explain how did you root it...
I want install twrp on this device with miui rom
Click to expand...
Click to collapse
I patched boot.IMG with magisk and unlock the bootloader and flash those boot.IMG with fastboot command
Fastboot flash boot boot.IMG
Easy steps
rehan992 said:
Please send me the link of twrp really I neede
Click to expand...
Click to collapse
If you want TWRP I can provide the link for it. And do remember it is not port and was built from Omni source, so it will not cause any problems that you might face with a Ported TWRP.
Here is the link for TWRP recovery.
https://drive.google.com/file/d/1T09QkNcDSe0mp7EjjMSK1aoc8303DjAI/view?usp=sharing
Soon I will post a thread on Rooting and flashing TWRP recovery without any errors.
For this time flash TWRP using below command through Fastboot and do remember your device must be unlocked before flashing anything.
Enter fastboot mode by entering below command in Command Prompt or Terminal:
Code:
adb reboot bootloader
just check if your device is recognised by using the below command:
Code:
fastboot devices
Now you can flash TWRP using below command:
Code:
fastboot flash recovery TWRP_recovery.img
If you patched boot.img then no need to flash Magisk (I recommend to patch boot.img using Magisk and then flashing TWRP).
If you want to go to recovery mode from fastboot then use below command:
Code:
fastboot oem reboot-recovery
If you want to enter system from fastboot then use below command.
Code:
fastboot reboot
Hope this one helps you. In my view you have already installed ADB tools or otherwise do it now., also you have enabled Developer Options with unlocked bootloader.
Related
Plz help I have successfully unlocked my boot loader unofficial way now I want to flash twrp when ever I flash twrp via fast boot it flash it but not able to reboot to twrp instead of that I got some phone pic with cable plz help
[Q] Problem with flashing twrp on Snapdragon RM3
android_smater said:
Plz help I have successfully unlocked my boot loader unofficial way now I want to flash twrp when ever I flash twrp via fast boot it flash it but not able to reboot to twrp instead of that I got some phone pic with cable plz help
Click to expand...
Click to collapse
How did you unlocked bootloader ?
android_smater said:
Plz help I have successfully unlocked my boot loader unofficial way now I want to flash twrp when ever I flash twrp via fast boot it flash it but not able to reboot to twrp instead of that I got some phone pic with cable plz help
Click to expand...
Click to collapse
That's probably b'coz it still isn't flashed.
Install MiPc suit and connect once with USB debugging on so that all the drivers do get installed correctly then
When using adb first type adb devices and look for your device to be sure that the device is connected correctly.
Which Twrp are you trying to flash?
android_smater said:
Plz help I have successfully unlocked my boot loader unofficial way now I want to flash twrp when ever I flash twrp via fast boot it flash it but not able to reboot to twrp instead of that I got some phone pic with cable plz help
Click to expand...
Click to collapse
follow this video https://www.youtube.com/watch?v=G_P7Qd3kpAI
note while dragging the file into cmd it copies path of the file with its name which will give you an error ...do not drag the file instead write it.
fastboot flash recovery twrp-3.0.2-2-kenzo.img
you have to flash a patched boot.img too
meangreenie said:
you have to flash a patched boot.img too
Click to expand...
Click to collapse
no i can't find boot.img plz provide me
android_smater said:
no i can't find boot.img plz provide me
Click to expand...
Click to collapse
1. Flash twrp as usual -> fastboot flash recovery twrp.img
2. Then boot it: fastboot boot twrp.img
And everything should be fine. Just remember to choose the right one Cheers!
CukierPuder said:
1. Flash twrp as usual -> fastboot flash recovery twrp.img
2. Then boot it: fastboot boot twrp.img
And everything should be fine. Just remember to choose the right one Cheers!
Click to expand...
Click to collapse
Thabku it work for me one more question how to flash ota and remain unlock botloader and twrp
android_smater said:
Thabku it work for me one more question how to flash ota and remain unlock botloader and twrp
Click to expand...
Click to collapse
It's completely depended on the ROM. Some of 'em relock bootloader, other don't (same for OTA updates).
ok thanks for your help i have successfully unlocked bootloader and install twrp as well rooted thank you
Hey guys I have an LG Stylo 3 Plus that i rooted in the past with help from my phone and installed Resurrection Remix I would like to do it again I flashed TWRP once again but anything and everything i do i cannot access TWRP to be able to wipe, flash etc etc. when I use fastboot to reboot into recovery I get the android robot sleeping with "No command" I'm new to rooting so please dont judge me or anything for asking for help thank you ?
@WrathTheGod
You use ADB to boot into device's Recovery and NOT Fastboot
Code:
adb devices
adb reboot recovery
jwoegerbauer said:
@WrathTheGod
You use ADB to boot into device's Recovery and NOT Fastboot
Code:
adb devices
adb reboot recovery
Click to expand...
Click to collapse
So don't use fastboot reboot recovery?
WrathTheGod said:
So don't use fastboot reboot recovery?
Click to expand...
Click to collapse
Just use buttons, and read the instructions...
[Recovery][OFFICIAL] TWRP V3 For LG STYLO 3 PLUS
https://forum.xda-developers.com/android/development/recovery-twrp-v3-lg-stylo-3-plus-t3649621
Hello, is there any possible way to install android 12 beta GSI on Galaxy A10? The only method I come across is fastboot which is just bringing me to download mode which will not work for installing.
alansojan2020 said:
Hello, is there any possible way to install android 12 beta GSI on Galaxy A10? The only method I come across is fastboot which is just bringing me to download mode which will not work for installing.
Click to expand...
Click to collapse
... Galaxy A10 is crying on Android 11... Also wait for devs to make the ROM or make your own ROM. I don't bellive in gsi installing. If you have Android 12 gsi can I have link pls lol
Abd El-Rahman El-Batal said:
... Galaxy A10 is crying on Android 11... Also wait for devs to make the ROM or make your own ROM. I don't bellive in gsi instal
Click to expand...
Click to collapse
Abd El-Rahman El-Batal said:
... Galaxy A10 is crying on Android 11... Also wait for devs to make the ROM or make your own ROM. I don't bellive in gsi installing. If you have Android 12 gsi can I have link pls lol
Click to expand...
Click to collapse
I have it here https://www.getdroidtips.com/download-android-12-gsi/
alansojan2020 said:
Hello, is there any possible way to install android 12 beta GSI on Galaxy A10? The only method I come across is fastboot which is just bringing me to download mode which will not work for installing.
Click to expand...
Click to collapse
Also gimme gsi link lol
alansojan2020 said:
Hello, is there any possible way to install android 12 beta GSI on Galaxy A10? The only method I come across is fastboot which is just bringing me to download mode which will not work for installing.
Click to expand...
Click to collapse
I tried gsi before. I tried android 11 gsi which didn't worked. Anyways can I install vendor with it maybe it works?
Abd El-Rahman El-Batal said:
Also gimme gsi link lol
I tried gsi before. I tried android 11 gsi which didn't worked. Anyways can I install vendor with it maybe it works?
Click to expand...
Click to collapse
I tried it with 64 bit A10 vendor but it doesn't work
alansojan2020 said:
I tried it with 64 bit A10 vendor but it doesn't work
Click to expand...
Click to collapse
Then try 32 bit one lol
alansojan2020 said:
Hello, is there any possible way to install android 12 beta GSI on Galaxy A10? The only method I come across is fastboot which is just bringing me to download mode which will not work for installing.
Click to expand...
Click to collapse
BRO I found the solution.
Ok first clean to install a new ROM in twrp.
I mean wipe system and data and cache. Now switch twrp to install image mode and choose "system.img" flash it as system.
And flash this after it. The dm verification disabler. BUT make sure you have some empty space in internal storage. [About 5GB or smth] clean up space. Tell me your results after doing this. Here is file [check attachments] I'm 50% sure it gonna work. Plz tell me results.
Edit: NVM I tested it people was saying it works it doesn't. So read next post.
alansojan2020 said:
Hello, is there any possible way to install android 12 beta GSI on Galaxy A10? The only method I come across is fastboot which is just bringing me to download mode which will not work for installing.
Click to expand...
Click to collapse
Ok bro the dm verify not gonna work.
You must do the following commands people tried before and it worked.
First put your device in recovery.
Make sure to enable USB debugging.
Then if you can't boot to recovery simply when device is on type command:
and reboot recovery
And it will reboot you to recovery.
Clean the system and other stuff such as data.
TWRP supports adv commands btw
Simply type and reboot bootloader or just reboot to download mode ._ .
Now you gotta type command:
fastboot devices
If you see your device listed type comman
fastboot flash system SYSTEM://IMAGE/LOCATION.IMG
Then when done.. [gsi comes with vbmeta file]
Do this command:
fastboot flash vbmeta VBMETA://IMAGE/LOCATION.IMG
then just do this command:
fastboot reboot
Tell me results.
Abd El-Rahman El-Batal said:
Ok bro the dm verify not gonna work.
You must do the following commands people tried before and it worked.
First put your device in recovery.
Make sure to enable USB debugging.
Then if you can't boot to recovery simply when device is on type command:
and reboot recovery
And it will reboot you to recovery.
Clean the system and other stuff such as data.
TWRP supports adv commands btw
Simply type and reboot bootloader or just reboot to download mode ._ .
Now you gotta type command:
fastboot devices
If you see your device listed type comman
fastboot flash system SYSTEM://IMAGE/LOCATION.IMG
Then when done.. [gsi comes with vbmeta file]
Do this command:
fastboot flash vbmeta VBMETA://IMAGE/LOCATION.IMG
then just do this command:
fastboot reboot
Tell me results.
Click to expand...
Click to collapse
Okay I will do it tomorrow, thank you.
Abd El-Rahman El-Batal said:
Ok bro the dm verify not gonna work.
You must do the following commands people tried before and it worked.
First put your device in recovery.
Make sure to enable USB debugging.
Then if you can't boot to recovery simply when device is on type command:
and reboot recovery
And it will reboot you to recovery.
Clean the system and other stuff such as data.
TWRP supports adv commands btw
Simply type and reboot bootloader or just reboot to download mode ._ .
Now you gotta type command:
fastboot devices
If you see your device listed type comman
fastboot flash system SYSTEM://IMAGE/LOCATION.IMG
Then when done.. [gsi comes with vbmeta file]
Do this command:
fastboot flash vbmeta VBMETA://IMAGE/LOCATION.IMG
then just do this command:
fastboot reboot
Tell me results.
Click to expand...
Click to collapse
When I type in fastboot devices it just comes up
"C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot devices
C:\Program Files (x86)\Minimal ADB and Fastboot>"
alansojan2020 said:
When I type in fastboot devices it just comes up
"C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot devices
C:\Program Files (x86)\Minimal ADB and Fastboot>"
Click to expand...
Click to collapse
Yes me too. I thought my device was broken but smasungs does not support fastboot. It is impossible to install gsi using fastboot in a smasung device. Instead you can wait for a developer to release android 12 ROM.
Abd El-Rahman El-Batal said:
Yes me too. I thought my device was broken but smasungs does not support fastboot. It is impossible to install gsi using fastboot in a smasung device. Instead you can wait for a developer to release android 12 ROM.
Click to expand...
Click to collapse
I found this.
alansojan2020 said:
I found this.
Click to expand...
Click to collapse
Samsungs does not support fastboot. We have to wait until a developer releases android 12 ROM for galaxy a10
Abd El-Rahman El-Batal said:
Samsungs does not support fastboot. We have to wait until a developer releases android 12 ROM for galaxy a10
Click to expand...
Click to collapse
The video isnt using fastboot though
alansojan2020 said:
The video isnt using fastboot though
Click to expand...
Click to collapse
I tried the way and it ended up in a bootloop. I have to install my Rom again and set it up again
Abd El-Rahman El-Batal said:
I tried the way and it ended up in a bootloop. I have to install my Rom again and set it up again
Click to expand...
Click to collapse
Oh okay sorry about that.
alansojan2020 said:
Oh okay sorry about that.
Click to expand...
Click to collapse
So, I'm on cherish is right now. By the way. When I installed the Android 12 gsi and the system partition used all storage. And there was 64mb free only in system partion. Is that the problem?
Also I don't mind it's okay :3
Abd El-Rahman El-Batal said:
So, I'm on cherish is right now. By the way. When I installed the Android 12 gsi and the system partition used all storage. And there was 64mb free only in system partion. Is that the problem?
Also I don't mind it's okay :3
Click to expand...
Click to collapse
Is cherish really fast?
alansojan2020 said:
Is cherish really fast?
Click to expand...
Click to collapse
Want a gaming rom? Fast? Use the stock android 9 rom. Want android 11 gaming rom? Use corvus. Want android 11 gaming rom and with bunch of features? Use LINEAGE OS FE [FAN EDITION] it's the best rom I had for now.
Abd El-Rahman El-Batal said:
Want a gaming rom? Fast? Use the stock android 9 rom. Want android 11 gaming rom? Use corvus. Want android 11 gaming rom and with bunch of features? Use LINEAGE OS FE [FAN EDITION] it's the best rom I had for now.
Click to expand...
Click to collapse
Hi how do I install stock samsung android 10 rom with twrp?
Hi, first of all, I'm not a dev or else just user who had difficulties to flash GSI on my phone... Was 7 years with a samsung galaxy Note 3, with twrp....So easy to flash....
with the help of @gr0ndpa, thanks to him.....
FLASH GSI
Now I will explain how to flash easily with files attached
1/ first of all you need a phone and drivers installed, use xiaomi pc suite, unzip and install it
2/ you need to activate USB debug in dev options.
3/ dl adb folder unzip it and put in C
4/ run command and type
Code:
cd /adb
5/ then
Code:
adb devices
to check if phone recognised
6/
Code:
adb reboot bootloader
once in fast boot
7/
Code:
fastboot flash vbmeta vbmeta.img
wait finished type to enter in fastbootD
8/
Code:
fastboot reboot fastboot
9/
Code:
fastboot flash system
LiR 313.XXX.img
you will have a system error, but wait the flash begin in few seconds
at the end wait ok then
10/
Code:
fastboot reboot recovery
on stock recover
11/ wipe data and reboot with +/- and PWR
and you're done...
In case you want to flash custom kernel or patched boot image to root with magisk, you have to
12/
Code:
adb reboot bootloader
Copy kernel boot image to C drive and rename kernel boot image to boot.img.
13/
Code:
fastboot flash boot c:\boot.img
14/
Code:
fastboot reboot
In case you want to flash twrp put the file to adb folder and type in fastboot
15/
Code:
fastboot boot twrp.img
Downloads for : Xiaomi Mi 11 Lite 5G | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
You can check what I ve done on tuto ss...
if you have some comments, don't hesitate...
I flashed LiR 18.1 rom and very happy with it.....
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++==================================================================================================================================================================================================================++
Flash ROM
This now how to flash ROM on your device, it's convenient for all roms like LOS, corvus, awaken...
First you need all the proper drivers installed and unlocked bootloader, USB debugging all of that stuff.
Now open up a cmd/terminal , and put the files i sent and the ROM file in the folder from where you're opening the cmd/terminal and connect the phone (you may need to put ./ as an suffix for all the commands if you're on linux)
Type
Code:
adb reboot bootloader
Then type
Code:
fastboot devices
to see if everything is ok
Then type
Code:
fastboot flash boot_ab boot.img
(you can drag and drop the file instead of typing it)
After that's done type
Code:
fastboot flash vendor_boot_ab vendor_boot.img
(you can drag and drop this too if you want)
Code:
fastboot flash dtbo dtbo.img
(you can drag and drop this too if you want)
After that's done type
Code:
fastboot reboot recovery
This will boot you into a recovery and now you need to go to wipe and format data
After that go to apply update then adb sideload then
In the cmd type
Code:
adb sideload rom.zip
for example (you put the ROM zip here you can drag and drop it)
Wait for that to finish it will go to 47% and on the phone it will show step 1/2 then step 2/2
and when it's done it's gonna show an error
adb: failed to read command: No error
Then you can reboot to system
Hello thank your for the short HowTo. Unfortunately im stuck on invalid sparse error. Could you pls post a fix to solve this? Would appreciate your help.
hardshell said:
Hello thank your for the short HowTo. Unfortunately im stuck on invalid sparse error. Could you pls post a fix to solve this? Would appreciate your help.
Click to expand...
Click to collapse
You have to wait at least 30 sec after the error appear...
Are you sure you are on fastbootD???
tuto modified and completed to also root device with magisk and patch boot.img
when i restart into fastboot, it is frozen.
dy2592 said:
when i restart into fastboot, it is frozen.
Click to expand...
Click to collapse
normal, nothing happens on fastboot....when you flash, only thing is on your computer, not on screen..
cant seem to get this installed =(
rayman95 said:
8/
Code:
fastboot reboot fastboot
Click to expand...
Click to collapse
After I enter this, it just stays on waiting for any device.
Update: I was able to figure it out. My device had no drivers so I went search through updates on windows and installed a LeMobile Android driver os it shows up properly in device manager.
How does one install gapps?
dy2592 said:
After I enter this, it just stays on waiting for any device.
View attachment 5419437
Update: I was able to figure it out. My device had no drivers so I went search through updates on windows and installed a LeMobile Android driver os it shows up properly in device manager.
Click to expand...
Click to collapse
because you don't have xiaomi drivers installed...install xiaomi pc suite and you will have drivers installed...
duplicate
rayman95 said:
In step 14, I encountered the error "fastboot: error: ANDROID_PRODUCT_OUT not set" after executing the fastboot flash system command. what do I need to do?
Click to expand...
Click to collapse
Did you insert the img at the end?
Fastboot flash system LIRxxxxxxxxxxxx.img
you have to put your rom to adb folder and dont forget to add .img at the end
rayman95 said:
you have to put your rom to adb folder and dont forget to add .img at the end
Click to expand...
Click to collapse
1.img is your rom Is there anything else missing?
dy2592 said:
Did you insert the img at the end?
Fastboot flash system LIRxxxxxxxxxxxx.img
Click to expand...
Click to collapse
yaha your right thank you so much
rayman95 said:
you have to put your rom to adb folder and dont forget to add .img at the end
Click to expand...
Click to collapse
thank I solved my problem. Now I have another problem, how to install GAPPs
Patrick Star_ said:
thank I solved my problem. Now I have another problem, how to install GAPPs
Click to expand...
Click to collapse
run twrp, it's explain in 1st post or maybe try with magisk...I can install minimicroG nogoolag with it..
rayman95 said:
run twrp, it's explain in 1st post or maybe try with magisk...I can install minimicroG nogoolag with it..
Click to expand...
Click to collapse
I tried to use twrp to brush into GAPP, but the error is 70. How can I solve it? I don't know if there is a problem with my twrp. Can you send a tutorial on xiaomi11 Lite 5g installing twrp? Thank you very much
Patrick Star_ said:
I tried to use twrp to brush into GAPP, but the error is 70. How can I solve it? I don't know if there is a problem with my twrp. Can you send a tutorial on xiaomi11 Lite 5g installing twrp? Thank you very much
Click to expand...
Click to collapse
In case you want to flash twrp put the file to adb folder and type in fastboot
15/
Code:
fastboot boot twrp.img
And twrp link is in post 1..maybe you choose bad gapps variant
Hi there everyone, i want to know, how can i take a backup of stock rom of my device.
Do i need to root my device before taking a backup? If not then is there any other way to take backup of Stock Rom (i.e boot.img etc) with the help of PC (here Ubuntu Linux in my case) via using ADB, Fastboot and not using custom recoveries like TWRP, Orange Fox, SHRP.
Also do i have to root my device before installing any custom recovery in it?
I am very sorry for any inconveniences, as i am a newbie please accept my apologies.
as already mentioned in other thread one can't do anything on locked bootloader, therefore backup is impossible
https://forum.xda-developers.com/t/a-question-from-a-newbie.4407343
akram0010 said:
Hi there everyone, i want to know, how can i take a backup of stock rom of my device.
Do i need to root my device before taking a backup? If not then is there any other way to take backup of Stock Rom (i.e boot.img etc) with the help of PC (here Ubuntu Linux in my case) via using ADB, Fastboot and not using custom recoveries like TWRP, Orange Fox, SHRP.
Also do i have to root my device before installing any custom recovery in it?
I am very sorry for any inconveniences, as i am a newbie please accept my apologies.
Click to expand...
Click to collapse
Assuming that the bootloader is unlocked.
aIecxs said:
as already mentioned in other thread one can't do anything on locked bootloader, therefore backup is impossible
https://forum.xda-developers.com/t/a-question-from-a-newbie.4407343
Click to expand...
Click to collapse
Sorry i forgot to mention, but still unlocking bootloader doesn't root device.
I think the question is still valid
if your bootloader is unlocked just boot into TWRP and create backup, no root required
Code:
fastboot boot recovery.img
edit: or just download MIUI according to your current properties
Code:
adb shell getprop ro.build.fingerprint
the only other method would be MTK secure boot authentification exploit
https://github.com/francescotescari/XiaoMiToolV2
https://github.com/bkerler/mtkclient
https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377
aIecxs said:
if your bootloader is unlocked just boot into TWRP and create backup, no root required
Code:
fastboot boot recovery.img
edit: or just download MIUI according to your current properties
Code:
adb shell getprop ro.build.fingerprint
the only other method would be MTK secure boot authentification exploit
https://github.com/francescotescari/XiaoMiToolV2
https://github.com/bkerler/mtkclient
https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377
Click to expand...
Click to collapse
Is root needed
aIecxs said:
if your bootloader is unlocked just boot into TWRP and create backup, no root required
Code:
fastboot boot recovery.img
edit: or just download MIUI according to your current properties
Code:
adb shell getprop ro.build.fingerprint
the only other method would be MTK secure boot authentification exploit
https://github.com/francescotescari/XiaoMiToolV2
https://github.com/bkerler/mtkclient
https://forum.xda-developers.com/t/mod-dev-mediatek-mtk-auth-bypass-sla-daa-utility.4232377
Click to expand...
Click to collapse
Can you please tell me what is this recovery.img, and where would i get it (in Fastboot rom or recovery rom).
As i said earlier i am a newbie in this field and very much confused with these terms.
no root required click on the first link above and download TWRP for your device (TWRP-3.4.2.b_lancelot.zip)
I assume you are running windows?
extract zip file and place recovery.img on your PC in platform-tools directory. connect phone in fastboot mode, install android_winusb.inf "Android Bootloader Interface" drivers and from cmd.exe check fastboot devices
if you can see device serialno you are ready to boot TWRP from fastboot with above first command.
for linux just install android-tools-fastboot
As i am using Ubuntu i installed ADB, FASTBOOT using the APT :
Code:
sudo apt install android-tools-adb android-tools-fastboot
.
Therefore i don't have the platform-tools directory.
Also I am unable to quote reply, its showing error (Oops, we broke the Matrix, someone call Neo)
yes that's right. it doesn't matter which directory files are placed. that way you installed fastboot binary is already in PATH. linux is far more easier and doesn't require additional drivers. it might require additional udev rules to make fastboot work, but you can simply by-pass with sudo fastboot for now...