Please help, completely wiped my phone and cant reflash any ROM - Galaxy S6 Edge Q&A, Help & Troubleshooting

Selling my G925F (Galaxy S6 Edge) and it was rooted with CarHD Rom that I used, I wanted to remove this and return it back to stock so I tried doing a few ways to unroot it with much fail, I ended up using the TWRP recovery and wiping absolutely everything...
Now I am in ODIN trying to flash a ROM I found for my phone, its not working. Its either sticking on ConnectionSetup and then telling me WriteError or something..
I am 100% in download mode, I have downloaded the latest SAmsung mobile drivers. Just cant get it to work, whether or not the ROM I am trying to flash is bad I dont know, so I am back on this forum trying other ROMS, even trying other custom ROMS just to get the phone up and running again but it seems the way you flash these ROMS is not via ODIN and that you actually need the phone to be working to do so?
Can anyone help me sort this out please, if this is what classing "bricked" as, please help me unbrick

Dstruct88 said:
Selling my G925F (Galaxy S6 Edge) and it was rooted with CarHD Rom that I used, I wanted to remove this and return it back to stock so I tried doing a few ways to unroot it with much fail, I ended up using the TWRP recovery and wiping absolutely everything...
Now I am in ODIN trying to flash a ROM I found for my phone, its not working. Its either sticking on ConnectionSetup and then telling me WriteError or something..
I am 100% in download mode, I have downloaded the latest SAmsung mobile drivers. Just cant get it to work, whether or not the ROM I am trying to flash is bad I dont know, so I am back on this forum trying other ROMS, even trying other custom ROMS just to get the phone up and running again but it seems the way you flash these ROMS is not via ODIN and that you actually need the phone to be working to do so?
Can anyone help me sort this out please, if this is what classing "bricked" as, please help me unbrick
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCY_G925FEVR1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Got a little further, at least it tries to start but now its just constantly failing
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3564 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Dstruct88 said:
Got a little further, at least it tries to start but now its just constantly failing
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3564 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
1. Try older / newer version of odin.
1.5 Try to start odin with administrator rights
2. Try different usb cable
3. Try different pc / os
4. Try different rom

Related

Does anyone have DI01package3.tar.md5?

I need that file to fix my phone and Adrynaly's web host went down. If someone could p2p or rehost this for me it would be greatly apperciated... Merry Christmas.
Try here
http://forum.xda-developers.com/archive/index.php/t-867648.html
Swyped from a black hole in a galaxy far far away, using the XDA app.
http://dl.dropbox.com/u/15289892/DI01package3.tar
justin94 said:
Try here
http://forum.xda-developers.com/archive/index.php/t-867648.html
Swyped from a black hole in a galaxy far far away, using the XDA app.
Click to expand...
Click to collapse
Yeah, that's what I need but it's down.
Im trying to get a mirror but so far its slow going.
DI01
I am trying to flash my phone back to stock and have downloaded this DI01 from other sites. when I try to use ODIN it gives me an "INVALID IMAGE TYPE" error message. my phone is on the yellow downloading screen. PLEASE HELP!
please do not be mad if I am posting this on the wrong thread. I am a noob and thus do not know better
I too am trying to flash back to stock.
Ive DL'd DI01package3.tar.md5...
Connected to Odin
But when I click start, I get the following messages
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Ive tried it a number of times, but no luck
the phone is now dead
can anyone help
I had a similar problem to you, with the package3 file; try the files linked to here:
http://forum.xda-developers.com/showpost.php?p=10711126&postcount=315
Namely, try flashing the Stock-i500-VZW-System.tar.md5 file via ODIN's PDA.
Follow the instructions on the first page of that thread; it should get you to a stock (as far as I can tell, anyway) DI01.
rushfanx1 said:
I too am trying to flash back to stock.
Ive DL'd DI01package3.tar.md5...
Connected to Odin
But when I click start, I get the following messages
<ID:0/003> Check MD5.. Do not unplug the cable..
<ID:0/003> Please wait..
<ID:0/003> Checking MD5 finished Sucessfully..
<ID:0/003> Leave CS..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Ive tried it a number of times, but no luck
the phone is now dead
can anyone help
Click to expand...
Click to collapse
mine gets this far have you got your to work
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> movinand.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
DI01package3.tar?????
Does anyone know if DI01package3.tar has been replaced with a newer file as I can not find a good link to download it.
Thank you
FrostBitten4x said:
Does anyone know if DI01package3.tar has been replaced with a newer file as I can not find a good link to download it.
Thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1526488

Problems after trying to root

Ok so after looking everywhere for a solution and screaming like a mad man in the process i decided to make a thread here and see if someone can help me.
I was running the leaked Android 4.0.3 (got the files from software2tech.com/2012/01/26/complete-guide-update-android-4-0-3-i9100xxlp6-for-samsung-galaxy-s2-video/) and i was running fine. Now i decided to root my phone using software2tech.com/2012/01/27/how-to-root-samsung-galaxy-s2-android-ics-4-0-3-i9100xxlp6/#more-16920
When Odin restarted my Phone all i got was that yellow triangle and i wasn't able to do anything at all but go into download mode (recovery mode is not working) so i thought i could just flash the 4.0.3 Android again and it will all be fine right?....WRONG. Got an error in Odin and after that my phone just said "Firmware Upgrade encountered an error. Please select recovery mode in Kies and try again". Tried it but Kies is not recognizing my phone (neither on the "Firmware upgrade error" screen nor in download mode).
Tried Pistachios Recovery guide but the recovery is not working...i can flash the kernel (which sends me back to the yellow triange) but when i try to flash the recovery files or the bootloader i just get more errors. Also read that flashing a stock kernel could be able to fix a problem like this but how am i supposed to find out what my kernel version is, and choose the right one for my phone if i can't start my phone?
Edit: Ok so here are the errors i get when i try to flash
Recovery files:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Bootloader:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PS: My Provider is Alice
bump bump bump
tried with stock files....error
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
tried the stock files again with the recovery kernel as pda (yeah probably not a good idea but i'm at the point where i don't really care anymore) got this error
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003>
<ID:0/003> Receive Response form LOKE
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Miigi said:
Ok so after looking everywhere for a solution and screaming like a mad man in the process i decided to make a thread here and see if someone can help me.
I was running the leaked Android 4.0.3 (got the files from software2tech.com/2012/01/26/complete-guide-update-android-4-0-3-i9100xxlp6-for-samsung-galaxy-s2-video/) and i was running fine. Now i decided to root my phone using software2tech.com/2012/01/27/how-to-root-samsung-galaxy-s2-android-ics-4-0-3-i9100xxlp6/#more-16920
When Odin restarted my Phone all i got was that yellow triangle and i wasn't able to do anything at all but go into download mode (recovery mode is not working) so i thought i could just flash the 4.0.3 Android again and it will all be fine right?....WRONG. Got an error in Odin and after that my phone just said "Firmware Upgrade encountered an error. Please select recovery mode in Kies and try again". Tried it but Kies is not recognizing my phone (neither on the "Firmware upgrade error" screen nor in download mode).
Tried Pistachios Recovery guide but the recovery is not working...i can flash the kernel (which sends me back to the yellow triange) but when i try to flash the recovery files or the bootloader i just get more errors. Also read that flashing a stock kernel could be able to fix a problem like this but how am i supposed to find out what my kernel version is, and choose the right one for my phone if i can't start my phone?
Edit: Ok so here are the errors i get when i try to flash
Recovery files:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Bootloader:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PS: My Provider is Alice
Click to expand...
Click to collapse
my friend
if u don't use software from xda forum, why u make posts here. go to software2tech.com and make posts there. u asked us to give a solution to something we never used and we don't know nothing about.

Samsung SII stuck at "Firmware upgrade encountered...."

First, I know you are going to ask me to search threads started by other people. I did.
And almost every single one of them wanted me to go to "download mode". The problem is I cant go into download mode no matter how long i pressed the 3 button combination.
So, I tried to root my Samsung Galaxy SII, and things got out of control. It went to "Firmware upgrade encountered an issue..."
I've tried other methods in the forums too, and nothing works. Flashing firmwares dont work for me too.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SIN_I9100DXLP9_I9100OLBLP9_I9100DXLP9.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
Can anyone help me?
chipzx said:
First, I know you are going to ask me to search threads started by other people. I did.
And almost every single one of them wanted me to go to "download mode". The problem is I cant go into download mode no matter how long i pressed the 3 button combination.
So, I tried to root my Samsung Galaxy SII, and things got out of control. It went to "Firmware upgrade encountered an issue..."
I've tried other methods in the forums too, and nothing works. Flashing firmwares dont work for me too.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SIN_I9100DXLP9_I9100OLBLP9_I9100DXLP9.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
Can anyone help me?
Click to expand...
Click to collapse
I had the Exact same problem as you this is what you need to do.
1. Take everything out of your phone micro sd ,sim battery disable kies process as well
2.Get your Usb Port and connect the first side to your pc but not to the phone
3.Insert Battery
4.Hold the vol down butt and at the same time connect the Other side of the cable into the phone then you will see
DOWNLOAD MODE!!!!!
5.From there install your stock rom again using samfirmware.com
6.Done
For 2 minutes it worked, then this came out
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Is it just because my phone has low battery?
THANKS, IT WORKED
Have been fixing it for one whole day, THANKS!!!
custom kernel
chipzx said:
For 2 minutes it worked, then this came out
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Is it just because my phone has low battery?
Click to expand...
Click to collapse
Why don't you install custom kernel..
Go gokhanmoral.com then download latest S2 4.1+ for ICS and JB...
mizzeeboy said:
I had the Exact same problem as you this is what you need to do.
1. Take everything out of your phone micro sd ,sim battery disable kies process as well
2.Get your Usb Port and connect the first side to your pc but not to the phone
3.Insert Battery
4.Hold the vol down butt and at the same time connect the Other side of the cable into the phone then you will see
DOWNLOAD MODE!!!!!
5.From there install your stock rom again using samfirmware.com
6.Done
Click to expand...
Click to collapse
you are GOD!!!
my galaxy s2 is working again, not anymore a dummy
thanks
eheheh said:
you are GOD!!!
my galaxy s2 is working again, not anymore a dummy
thanks
Click to expand...
Click to collapse
glad to help

Need Help Soft Brick shg-m919

Hello,
I have a Samsung galaxy s4 (sgh-m919), I rooted it using odin3. about 2 months later I decided to revert back to a unroot state. I followed galaxys4root.com tutorial to unroot. I downloaded the usb driver and downloaded the firmware,
I ran odin in admin mode and pluged in phone in download mode. I clicked pda and added my .tar.md5 file and clicked start. this is what I got .
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
don't know how to fix the problem!!!!!!!!!
Hello,
I have a Samsung galaxy s4 (sgh-m919), I rooted it using odin3. about 2 months later I decided to revert back to a unroot state. I followed galaxys4root.com tutorial to unroot. I downloaded the usb driver and downloaded the firmware,
I ran odin in admin mode and pluged in phone in download mode. I clicked pda and added my .tar.md5 file and clicked start. this is what I got .
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
don't know how to fix the problem!!!!!!!!!
Sent from my SGH-M919 using xda app-developers app
Problem fixed
richardlg1 said:
Hello,
I have a Samsung galaxy s4 (sgh-m919), I rooted it using odin3. about 2 months later I decided to revert back to a unroot state. I followed galaxys4root.com tutorial to unroot. I downloaded the usb driver and downloaded the firmware,
I ran odin in admin mode and pluged in phone in download mode. I clicked pda and added my .tar.md5 file and clicked start. this is what I got .
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
don't know how to fix the problem!!!!!!!!!
Sent from my SGH-M919 using xda app-developers app
Problem fixed
Click to expand...
Click to collapse
OMG YES IM HAVING THE SAME ISSUE i was able to get back into the os but i tried to root again and it didnt stick so im back in the soft brick SOMEONE PLEASE HELP
Bump! I would appreciate if someone would help with this issue, as I am also having the same problem.
Odin fails to flash even a stock rom.. please help.
skay301 said:
Bump! I would appreciate if someone would help with this issue, as I am also having the same problem.
Odin fails to flash even a stock rom.. please help.
Click to expand...
Click to collapse
bump. I am having the same issue. stuck in a soft brick with odin unable to successfully load stock or a custom rom. tried different PIT files. tried different roms, tried pushing via adb, tried on windows, osx, and Linux. im seriously gasping as straws here.
odin mode
product name: sgh-m919
current binary: samsung official
system status: custom
knox kernel lock: 0x0
knox warrenty void: 0x1
cso-config-lsb:0x30
write protection enabled:
emmc burst mode enabled
Click to expand...
Click to collapse
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
toosweetnitemare said:
bump. I am having the same issue. stuck in a soft brick with odin unable to successfully load stock or a custom rom. tried different PIT files. tried different roms, tried pushing via adb, tried on windows, osx, and Linux. im seriously gasping as straws here.
Click to expand...
Click to collapse
You need to create your own thread and describe in detail :
Can you get to Download Mode?
Can you get into Recovery? If so, custom (version>) or stock?
What version of the software / firmware WERE you on?
What did you do to cause it to soft brick?
What versions of the software / firmware have you tried?
Why were you trying different PIT files??
What errors are you having?
es0tericcha0s said:
You need to create your own thread and describe in detail :
Click to expand...
Click to collapse
Thanks in advance for the help!
Can you get to Download Mode?
yes
Can you get into Recovery? If so, custom (version>) or stock?
yes. I just flashed twp on it.
What version of the software / firmware WERE you on?
I was on 4.4.2 from tmobile stock but it was rooted.
What did you do to cause it to soft brick?
I have been getting prompted for an OTA update for a while and kept putting it off. let my wife use my phone and she clicked approve for the update. The phone then rebooted and never booted back up. I originally thought it was a knox issue but after trying a few different recovery methods, all my errors seem to be directed to the PIT. I am currently downloading the Samsung firmware for 4.4.4 from the Samsung website to try sending over to the phone from odin.
Model: SGH-M919
Model name: GALAXY S4
Country: USA (T-Mobile)
PDA: M919UVUFNH7
What versions of the software / firmware have you tried?
4.2.2, 4.4.2, about to try 4.4.4 when it finishes downloading.
Why were you trying different PIT files??
because the current error is "secure check fail: PIT"
What errors are you having?
from which location? odin or the device?
from the device:
secure check fail: PIT
from odin:
big red FAIL in the first box. message output is below.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

[Q] S2 bootloop, only Download Mode, ODIN stuck in NAND write start

Hi guys,
I have a problem with my S2 (i9100)...I don't understand how it's possibile, but my phone suddenly it has fallen in bootloop, after unaffected reboot. (I wasn't using it).
So I have tried the instructions at bootloop in this thread http://forum.xda-developers.com/galaxy-s2/development-derivatives/kernel-t2291756
After the wipe of dalvik cache and cache I wasn't able to enter into recovery mode but only in download mode and thus I have tried to flash philz kernel but ODIN failed the flash
And now in ODIN i can't flash anymore but it's stuck in "NAND write start".
Please can someone help me? Thanks!
My Device: GT-i9100
ROM: WizzedKAT v. 3.3
KERNEL: Apolo 4.14 Regular
You need to go back to stock, not another custom kernel. Get a stock rom from Samfirmware, and find Hopper8's 'Odin troubleshooting' thread stickied in General - go through the troubleshooting stuff in a methodical manner until you get a successful flash.
There's a chance this might not fix the problem on its own & you still might need to do a factory reset after the flash. If even that doesn't fix the problem, flash the 3 part firmware linked in the thread, which will wipe your phone of whatever is causing bootloop hopefully.
Once you're back at stock you can re-root your phone & restore a nandroid or reinstall custom rom/whatever.
Thanks for reply!
I'm trying to flash a stock ROM (this: I9100XWLSW_I9100XXMS3_I9100ITVLS2_HOME.tar.md5) but ODIN failed the flash.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSW_I9100XXMS3_I9100ITVLS2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Instead flashed 3 part firmware, ODIN stuck in data.img or failed
ODIN v.1.85
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
ODIN v.3.09
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried different versions of ODIN and 2 different cable and computer (whit one yesterday I flashed s3 mini without problems)
It's possibile that emmc may be corrupted?
(Sorry for my bad English :S)
Possibly, but you essentially have two choices here:-
1) Keep trying the stuff in that thread over & over I.E all of it (not just a few things), as many times as you need to. There is nothing that can be suggested in these situations which isn't in that thread, it's 'the bible' for this sort of problem. Perseverance always fixes these when they're recoverable (and most are).
2) Give up & pay for a motherboard replacement or a new phone.
I know what I'd be doing if I was in your situation.

Categories

Resources