[Discontinued]Dirty Unicorns[UNOFFICIAL][09.12.2018][S9/S9+/N9] - Samsung Galaxy Note 9 (Exynos) ROMs, Kernels, Reco

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dirty Unicorns Semi GSI for Samsung Devices
By CodeFox & OpenSauce9810​
What is this?
This is a Semi Generic System Image. That means it's a generic system image that's been optimized as much as possible for our Samsung Devices.
How the heck do I flash this?
It's slightly different than flashing a zip, so here's what you need to do.
Download the image file
UNCOMPRESS IT .xz is a compressed file. So you can uncompress it with zarchiver from the playstore or 7zip/winrar.
Flash the ARH6 Vendor Image to your Vendor Partion from TWRP (Press the Install Image button at the bottom right of where you usually select a flashable zip)
Flash the System Image to your System Partition
Optional if you want root (but reccomended): Reboot to recovery again then flash your choice of Magisk. I use 17.1 as I can get galaxy wear to work with that version.
Reboot your device and you should be good to go! No need to flash gapps as they're included.
03.12.2018
Initial Release
05.12.2018
Updated sources to 9.0 r21 release. (December Security Patch)
Gapps included, (dialer and messenger also included so you won't start without a phone or sms app)
Bootanimation changed to reduce boot times
Tweaks to ambient play ticker so it clears when you clear media notifications
Further performance tweaks thanks to @malinathani animations transition smoother now.
09.12.2018
Keystore fixed - You can now use fingerprint within apps (once you've passed safetynet with hideprops module)
Screenshots
[/YOUTUBE]
Video Review Thanks to @vmb265
Click here to view video review
Downloads:
System Image GDrive
Vendor Image
Support & Feedback
I'm happy to provide as much support as possible. Through XDA here or you can get in touch with me and the rest of OpenSauce9810 + our community at our Telegram group here
Our telegram also has a bot which will provide you with the latest builds.
If you're happy with the work I've put into this (endless amounts of hours trying to perfect GSI building) then a simple thanks here or clicking the thanks button below is very appreciated!
Credits and Thanks
Dirty Unicorns (The best ROM ever)
Ivan - Thank you for helping me out every now and then when I'm being stoopid.
Rainbow_Dash - Pointing me in the right direction with regards to fixing the errors.
malinathani- For the UI Jank Fix (Used widely in other GSI's now)
GRaf - best tester
The guys in telegram as a whole, thank you for the feedback and support.
phhusson - thank you for your work on project treble.
XDA:DevDB Information
[Discontinued]Dirty Unicorns[UNOFFICIAL][09.12.2018][S9/S9+/N9], ROM for the Samsung Galaxy Note 9
Contributors
CodeFox, Rainbow_Dash, malinathani, phhusson, Dirty Unicorns, Ivanmeler,
Source Code: https://github.com/DirtyUnicorns/android_manifest
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Vendor ARH6
Based On: Dirty Unicorns
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2018-12-03
Created 2018-12-03
Last Updated 2019-01-07

First! lol
Still on stock ROM but i'd love to flash some Dirty Unicorn goodness.
Any bugs to be aware of?

PieceofSlice said:
First! lol
Still on stock ROM but i'd love to flash some Dirty Unicorn goodness.
Any bugs to be aware of?
Click to expand...
Click to collapse
Fingerprint doesn't worth within apps. Other than that though everything's pretty much good I think.

@CodeFox Thanks for this rom. I used to make my own Du builds for nexus device. It was sucha an amazing experience.
Would love to try DU for note 9.
Just a couple of questions -
- Does any of the Touch wiz features like, pen related features ( bluetooth control work ) ?
- Phone related features by flashing csc files for specific network still doable ?

Techvir said:
@CodeFox Thanks for this rom. I used to make my own Du builds for nexus device. It was sucha an amazing experience.
Would love to try DU for note 9.
Just a couple of questions -
- Does any of the Touch wiz features like, pen related features ( bluetooth control work ) ?
- Phone related features by flashing csc files for specific network still doable ?
Click to expand...
Click to collapse
Pretty much all Samsung features are lost on AOSP however there are a lot of alternative apps that can "revive" the Spen.

PieceofSlice said:
Pretty much all Samsung features are lost on AOSP however there are a lot of alternative apps that can "revive" the Spen.
Click to expand...
Click to collapse
That is what I thought... Thanks for answering

I flashed this twice. Both times I couldn't get the setup wizard to show up. There are no gapps in the app drawer either.
Can someone confirm? I'm pretty sure I did everything right with the flashing process..

Nasty_z said:
I flashed this twice. Both times I couldn't get the setup wizard to show up. There are no gapps in the app drawer either.
Can someone confirm? I'm pretty sure I did everything right with the flashing process..
Click to expand...
Click to collapse
Gapps aren't included. You'll need to download a package from opengapps. Arm64 9.0. I recommend nano.
Don't forget to download a phone and SMS app too.
I copied and pasted from my PE thread so I need to take out the gapps included part. My bad, sorry about that.

CodeFox said:
Gapps aren't included. You'll need to download a package from opengapps. Arm64 9.0. I recommend nano.
Don't forget to download a phone and SMS app too.
I copied and pasted from my PE thread so I need to take out the gapps included part. My bad, sorry about that.
Click to expand...
Click to collapse
No problem. Also, the .xz file needs to be extracted and the IMG file in it needs to be flashed to the system partition. I noticed you haven't included this in the flashing instructions
Thank you for the ROM btw

Nasty_z said:
No problem. Also, the .xz file needs to be extracted and the IMG file in it needs to be flashed to the system partition. I noticed you haven't included this in the flashing instructions
Thank you for the ROM btw
Click to expand...
Click to collapse
I'll update the posts tomorrow. I'm looking after 4 threads at the minute as there's 2 more in the s9 forum ? it's proving to be challenging haha.
You're welcome. This one is a lot smoother than pixel experience.

CodeFox said:
I'll update the posts tomorrow. I'm looking after 4 threads at the minute as there's 2 more in the s9 forum ? it's proving to be challenging haha.
You're welcome. This one is a lot smoother than pixel experience.
Click to expand...
Click to collapse
Haha I can understand. Btw I just restored the galaxy wearable, Samsung accessory service, gear s plugin and Samsung health using titanium backup and I didn't have to reset my gear. It just connected right away and it's working fine now. The backup I made using titanium backup was on Pixel Experience right before I flashed this rom.
I hope it doesn't do a freak reset later.. Too good to be true? :silly:

Nasty_z said:
Haha I can understand. Btw I just restored the galaxy wearable, Samsung accessory service, gear s plugin and Samsung health using titanium backup and I didn't have to reset my gear. It just connected right away and it's working fine now. The backup I made using titanium backup was on Pixel Experience right before I flashed this rom.
I hope it doesn't do a freak reset later.. Too good to be true? :silly:
Click to expand...
Click to collapse
Hmm thanks for letting me know. I'll give it a go. I really do need to start using titanium backup more often. I usually have problems with apps not notifying me of new posts anymore or them being stuck in the past though.

CodeFox said:
Hmm thanks for letting me know. I'll give it a go. I really do need to start using titanium backup more often. I usually have problems with apps not notifying me of new posts anymore or them being stuck in the past though.
Click to expand...
Click to collapse
I agree with you on those issues. Apps like whatsapp are affected with the delayed notifications so I avoid backing it up with titanium backup. Still, the fact that Gear doesn't need to be reset is a big thing. I even toggled Bluetooth on and off multiple times and it still connects to it without any prompt for reset

CodeFox said:
I'll update the posts tomorrow. I'm looking after 4 threads at the minute as there's 2 more in the s9 forum it's proving to be challenging haha.
You're welcome. This one is a lot smoother than pixel experience.
Click to expand...
Click to collapse
Damn just Flased PixelExperience last night. Will definitely be installing this. I found pe was smooth enough so the fact that this is a lot smoother is really nice. Thanks mate

Nasty_z said:
I agree with you on those issues. Apps like whatsapp are affected with the delayed notifications so I avoid backing it up with titanium backup. Still, the fact that Gear doesn't need to be reset is a big thing. I even toggled Bluetooth on and off multiple times and it still connects to it without any prompt for reset
Click to expand...
Click to collapse
The ability to restore gear with titanium is something new ... I could not do that till very recently but last week when I did a restore, there was no need to reset the watch and I was amazed..

Techvir said:
The ability to restore gear with titanium is something new ... I could not do that till very recently but last week when I did a restore, there was no need to reset the watch and I was amazed..
Click to expand...
Click to collapse
Glad to know it's not just me

New build released. see OP for details.

CodeFox said:
New build released. see OP for details.
Click to expand...
Click to collapse
You're on fire! Thanks

i love dirty so much
great to see this

Hello there. Iam new to. Gsi roms. Needed to ask the flashing steps. Iam on light rom right now with dual sim model.
1. In twrp clear everything. Cache data system
2. Flash vendor image
3. Flash system image
So i was able to boot this rom and everything was working included dual sim. then i downloaded viper for android ,flashed in magisk, restarted and kept in boot loop since.

Related

[ROM][4.4.4]09/10[CrossCompiled][CyanogenMod11w/Sabermod,Linaro-03][Semi-nightlies]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unofficial CyanogenMod 11 SABERMOD 4.8 Toolchain​
Alright, well it's about time Google. What we have here is going to be CM11 4.4.4 builds for your Galaxy S2 i777 with the bonus of Sabermod toolchain. I will continue to add tweaks and change things but this will also be updated from CyanogenMod as well. I could theme this if interested as well and at some point I will add more features and tweaks. CLEAN install is recommended for your first time but dirty will be fine after that unless I notify you differently.
HOW TO INSTALL
Make sure you are on CWM 6.0.4.4+ before flashing ROM!
I by far recommend TWRP tho as that is what all testing will be done with because I no longer use CWM.
Download the zip
Download compatible Gapps
WIPE DATA/FACTORY RESET
Wipe Cache/Dalvic Cache
Flash the Rom
Flash Gapps
Reboot
Enjoy
Install from my previous build:
Download the zip
WIPE Cache
WIPE Dalvik Cache
Flash the ROM
Reboot
Current build:09192014
New Downloads: Shifted CM11 Builds
Downloads: CM11 Builds
Recommended Recovery SGH-959G: TWRP 2.7.0.1 courtesy of @mr-cook of course
Recommended GAPPS: GAPPS
(Others may work but I've only tested these)
Custom kernel: Shift
Apple Emoji for your I777: Apple Emoji
Google Camera: Camera
Play Services Update: Play Services
SUPERSU:http://download.chainfire.eu/451/SuperSU/UPDATE-SuperSU-v2.01.zip
Thanks goes out to:
@infected_ @mr-cook for random questions, solid input and the twrp recovery
for helping me in anyway that I've asked to the best of their abilites. You guys have been awesome!!!!
Also Entire CyanogenMod Team for making their source open and available to the public. Pretty damn awesome of them if you ask me
I think that's it for now. Thanks guys and enjoy the BRAND NEW ANDROID for this seemingly never dying phone lol
This is NEVER expected but if you like my work and would like to buy me a beer you are more than welcome. Feels strange if posting this lol
Donate:https://www.paypal.com/cgi-bin/webs...=PP-DonationsBF:btn_donateCC_LG.gif:NonHosted
Donated. THANKS guys, you're awesome @BROKKANIC 7U939739JP1534703 @walttheboss 2x
Changelog can be found here if you are looking:
http://www.cmxlog.com/11/i9100/
Reserved #2
it would be interesting to see the list of changes in this version 4.4.3
and Apple Emoji flash into recovery? they will work on см11 4.4.2?
Here's the changelog. http://www.cmxlog.com/11/i9100/ I know front facing camera video record is fixed for sure. Yes the emoji needs to be flashed via recovery and yes it will work on 4.4.2 as well
Sent from my SGH-I317 using XDA Premium 4 mobile app
Nice dude! Thanks :thumbup::beer:
razen_kain said:
Nice dude! Thanks :thumbup::beer:
Click to expand...
Click to collapse
Word up haha, thanks. Messed with it for about 3 hours and the phone was running great and I didn't have one dropped data problem. Wifi or mobile. Refreshing
This is probably a stupid question, what is the difference between this and omni ROM? I know there is some just dont know what. Thanks guys
The grave digger will be the last person in the world to "let you down in a tight spot."
Sent from my SGH-S959G
Not bad considering it hasn't even settled in yet. She apparently used it all day. Boom
Sent from my SGH-I777 using XDA Premium 4 mobile app
grave_digger said:
This is probably a stupid question, what is the difference between this and omni ROM? I know there is some just dont know what. Thanks guys
The grave digger will be the last person in the world to "let you down in a tight spot."
Sent from my SGH-S959G
Click to expand...
Click to collapse
I honestly haven't used Omni in probably 18 months so maybe @cyril279 could help me out here. I know it's similar but from I can remember from way back at least is that cm was more feature rich but again that's been awhile. Sorry been busy trying to as linaro and some small tweaks the kernel and it's been eating my spare time. Not to mention I still have to keep my actual phone updated as well and I run those build as well. I could you another quad core or a couple duo's lol
Sent from my GT-N7105 using XDA Premium 4 mobile app
I haven't flashed this yet, but for anyone who has, does Soundsearch work? I'm on love4k21's build right now.
geicogecko said:
I haven't flashed this yet, but for anyone who has, does Soundsearch work? I'm on love4k21's build right now.
Click to expand...
Click to collapse
Do you have sound search from Google play installed? I've never had it not work on a ROM. Granted, i don't use it that much though...
razen_kain said:
Do you have sound search from Google play installed? I've never had it not work on a ROM. Granted, i don't use it that much though...
Click to expand...
Click to collapse
It's in the recommended gapps for this ROM, but I've had it before, back when Render was still working on 4.4.2. It's a massive battery hog, and so I just disable it w/ TIB
No such battery issues here. Over twenty hours both days. Might use a different gapps when I post the next build anyway just haven't tested it yet
Sent from my GT-N7105 using XDA Premium 4 mobile app
Can anyone tell me if the GPS is working on this rom? So far the only rom that I've found GPS to be working on 4.4.2 would be SOKP Ported Milestone 1.
jackal2001 said:
Can anyone tell me if the GPS is working on this rom? So far the only rom that I've found GPS to be working on 4.4.2 would be SOKP Ported Milestone 1.
Click to expand...
Click to collapse
It works. I always use GPS status with this phone. First lock takes about a minute but it's faster after that but I always use the high accuracy with this device
Sent from my SGH-I777 using XDA Premium 4 mobile app
rogersb11 said:
It works. I always use GPS status with this phone. First lock takes about a minute but it's faster after that but I always use the high accuracy with this device
Sent from my SGH-I777 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Downloading now to give it a try.
grave_digger said:
This is probably a stupid question, what is the difference between this and omni ROM? I know there is some just dont know what. Thanks guys
The grave digger will be the last person in the world to "let you down in a tight spot."
Sent from my SGH-S959G
Click to expand...
Click to collapse
omni rom has a great experience but just as a stock KK means features free but cm has a lot more features and i believe with the latest nighties i have had more smoothness aside from the new update to 4.4.3 which isn't so smooth yet as its still just out . i have tried omni at first but i settled for the cm experience bc its just smooth and feature loaded without any lag , also slim saber by cyril is fantastic and he didd a great job with his solid base but still miss the unique slim customizations . so if i may recommend go with cm but if wanting some minimal taste then go with slim . hope this made it a bit clear for you :cyclops:
New build up. Switched download repository. Updated OP and I also changed the gapps link to an updated version that should work for this device. I'll finish adding linaro to the kernel before the next build just haven't had time to finish editing some things I wanted to test quite yet. Flash and report any issues. Thanks
rogersb11 said:
New build up. Switched download repository. Updated OP and I also changed the gapps link to an updated version that should work for this device. I'll finishing adding linaro to the kernel before the next build just haven't had time to finish editing some things I wanted to test quite yet. Flash and report any issues. Thanks
Click to expand...
Click to collapse
Arrggghh. Just got the rom installed and now a new one. My typical dumb luck. Anyway I have the 01/05/2014 gapps installed. Seems to be working ok except lately I keep getting the contacts failing to sync. tryed clearing the data for contact storage, but it seems to be a problem in the future.
Anyway, what is the difference with the new Gapps you put up? Do I just install the gapps you put together over top of my existing gapps in recovery?

[ROM] FireFox OS Nightlies!

Sorry Guys I'm Back, here is that latest!
Firefox OS is still a work in progress but I have decided that it needs its time in the limelight so I am introducing nightly builds of the official Firefox OS source. Builds will be posted here and I will do my best to update them daily.
Current OS Version: 3.0.0.0-prerelease
Latest Build:
June 27, 2015- Build
All Builds:
FireFox OS Nightly Builds
Special Thanks to Syed Zain Ahmed for the Review above... see more of His reviews at his Youtube Channel Syed Zain Ahmed
For those who are interested these builds will also be installable under MultiRom if you do not want to wipe your current ROM.
Installation Instructions:
Wipe Data
Wipe Cache
Wipe Davlink
DO NOT WIPE internal Storage
flash Firefox OS
Reboot
for MultiRom see link above:
Known Bugs:
- Install as primary ROM fails and Wipes internal storage -squashed -Credits go to faultytowersdude and nickth for bringing this bug to my attention.​-Camera
Screen Shots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
More information on Firefox OS see :
Official Page:
https://www.mozilla.org/en-US/firefox/os/
Source Code:
B2G GitHub Mozilla Firefox OS
Wow I need to learn more of this one. Thanks for posting your work.
Boots up perfectly fine in Multi-boot. Looks great and is pretty smooth.
Wi-Fi works but no cell, data or LTE available. Says unknown SIM state. I'm sure those are known but just giving my experience.
Thank you. I look forward to seeing where this goes.
Sent from my Nexus 5 using Tapatalk
Well, that sounds perfect, just having wifi as that's all my Nexus 5 has due to me being on LG G3, so, I will definitely be checking into this. Thank you.
Sent from my LGLS990 using Xparent Green Tapatalk 2
Does this rom is different from the old thread ?
http://forum.xda-developers.com/google-nexus-5/development/b2g-firefox-os-nightlies-t2730874
:laugh:
ps000000 said:
Does this rom is different from the old thread ?
http://forum.xda-developers.com/google-nexus-5/development/b2g-firefox-os-nightlies-t2730874
:laugh:
Click to expand...
Click to collapse
OP has his own builds, and is doing work on it.
radicalisto said:
OP has his own builds, and is doing work on it.
Click to expand...
Click to collapse
OP is doing exactly what I did. Build the official source code.
Can you share the bugs list
Sent from my Nexus 5 using Tapatalk
ps000000 said:
Does this rom is different from the old thread ?
http://forum.xda-developers.com/google-nexus-5/development/b2g-firefox-os-nightlies-t2730874
:laugh:
Click to expand...
Click to collapse
From my understanding Abtekk and I are using the same original source however I will be posting updates daily and I am not changing the source, just building it, I believe that Abtekk has done some amount of development to improve his builds functionality beyond the original source tree. Also my Builds are flashable Zip's which work with recoveries like TWRP and CWM as well as MultiRom and effort Abtekk has not taken.
--correction Abtekk has noted that he was just building the source, again the difference is the consistency of nightly builds and the delivery format (ie.. flashable Zip)
wifi and cell work good, but camera not work
aaron.thomas.webster said:
From my understanding Abtekk and I are using the same original source however I will be posting updates daily and I am not changing the source, just building it, I believe that Abtekk has done some amount of development to improve his builds functionality beyond the original source tree. Also my Builds are flashable Zip's which work with recoveries like TWRP and CWM as well as MultiRom and effort Abtekk has not taken.
--correction Abtekk has noted that he was just building the source, again the difference is the consistency of nightly builds and the delivery format (ie.. flashable Zip)
Click to expand...
Click to collapse
Whatever it may be. We are happy someone took the initiative. There are no rules against multiple threads for same OS development.
@abtekk did not really release nightlies even after naming his thread that way. Last build was in June. I hope @aaron.thomas.webster, you will. Thanks for your work.
Sent from my Nexus 5
Doe's not work just tried to install, it wiped my phone without installing OS:silly:
faultytowersdude said:
Doe's not work just tried to install, it wiped my phone without installing OS:silly:
Click to expand...
Click to collapse
I've got a couple of questions for you... hopefully we will be able to get it running for you.
First which version have you downloaded and have you verified the MD5 hash?
Second What method did you use to install the ROM, I assume a custom recovery and not MultiRom since it wiped your phone?
Third and this one is not for faultytowersdude but for everyone else, has anyone else had trouble installing, I have only tested it on MultiRom since I like my other Rom and don't fill like going through the backup/restore process.
aaron.thomas.webster said:
I've got a couple of questions for you... hopefully we will be able to get it running for you.
First which version have you downloaded and have you verified the MD5 hash?
Second What method did you use to install the ROM, I assume a custom recovery and not MultiRom since it wiped your phone?
Third and this one is not for faultytowersdude but for everyone else, has anyone else had trouble installing, I have only tested it on MultiRom since I like my other Rom and don't fill like going through the backup/restore process.
Click to expand...
Click to collapse
Will not install for me either completely wipes everything but on install. Error 7. Comes up with this is for "Hammerhead" your phone is "" have tryed under twrp recovery and also cm recovery both come up with samething.
Though saying that abtekk's 1.4 prerelease zip version will install
nickth said:
Will not install for me either completely wipes everything but on install. Error 7. Comes up with this is for "Hammerhead" your phone is "" have tryed under twrp recovery and also cm recovery both come up with samething.
Though saying that abtekk's 1.4 prerelease zip version will install
Click to expand...
Click to collapse
I have changed my first Post to corespond with this error while I look for a solution, sorry I had only tried it under Multirom as a secondary ROM.... you could call me a noob... anyways I will try to get a working ROM over the next week or so... in the mean time I will continue to post nightlies that work on MultiRom. any direction or assistance would be gratefully received.
nickth said:
Will not install for me either completely wipes everything but on install. Error 7. Comes up with this is for "Hammerhead" your phone is "" have tryed under twrp recovery and also cm recovery both come up with samething.
Though saying that abtekk's 1.4 prerelease zip version will install
Click to expand...
Click to collapse
Try fix permission in twrp I had these issues this has fixed them .
Sent from my Nexus 5 using xda premium
faultytowersdude said:
Doe's not work just tried to install, it wiped my phone without installing OS:silly:
Click to expand...
Click to collapse
Sorry for the troubles... I had only tested my build as a secondary ROM in MultiRom... There was a glitch in the install script that wiped your internal SD card...
I have fixed the Glitch and all future builds will be tested both as a stand alone Rom and in MultiRom before upload.
Can I install apks on Firefox os I had problems sideloading I know I need to enable unknown sources but have no idea where that setting is
This is a solid rom. Thank you for the great experience. Once the camera bug is fixed its pretty much good for daily use.:victory:
spinninbsod said:
Can I install apks on Firefox os I had problems sideloading I know I need to enable unknown sources but have no idea where that setting is
Click to expand...
Click to collapse
Firefox os will not support apks.... it is a web OS (sort of.... its apps are built on web standards such as html and javascript) most of the apps running on it are written in html5 ... for more information on installing apps see Mozilla's FAQ's on Downloading and Installing Apps

[ROM] [UNOFFICIAL] [AOSP] LiquidSmooth v4.0 (Android 5.0) for the SGH-I777/959G

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome everyone once again to a brand new Android. Here you will find unofficial builds for LiquidSmooth v4.0 running Android 5.0 Lollipop. Bare in mind that these are currently in the ALPHA stage, so expect bugs here and there and things to be a little off. This is early in development and may or may not be daily driver ready yet. And now, on with the show.
Click to expand...
Click to collapse
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Code:
[URL="https://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
Code:
You can download the latest build from [URL="https://www.androidfilehost.com/?fid=95832962473398652"][COLOR="Blue"]]RIGHT HERE[/COLOR][/COLOR][/URL] (Current Build: 12/06 )
Gapps can be found [URL="https://www.androidfilehost.com/?fid=95832962473398367"][COLOR="Blue"]here[/COLOR][/URL] thanks to @rogersb11
INSTALLATION INSTRUCTIONS
1) DO A BACKUP!
2) If you haven't prior to this step, flash the Shift Eternal CM12 kernel, then reboot recovery.
3) Factory Reset, Wipe Cache, Wipe Dalvik.
4) Wipe System
4) Flash ROM then flash Gapps.
5) Reboot and enjoy!
Also note that the initial boot takes a good amount of time. Upwards of 10 minutes in some cases. Just be patient when you get ready to boot into the system. It will eventually start up.
IMPORTANT NOTE:
You must be on a Lollipop compatible kernel and recovery for this to flash. Currently, the only one available is the Shift Eternal CM12 kernel from @rogersb11. You can download it here. This ROM package contains the same kernel so you will not have to reflash it after flashing the ROM. Questions related to the kernel can be directed to this thread.
You will not have a keyboard upon the initial boot. Skip through the initial setup process then do the following:
Go to Settings>Language and Input
Select the current keyboard.
A pop up will then come up and you need to flip the hardware switch in the top right corner to on.
After this you can then go through with signing in with your account, setting up wifi, etc.
Please remember that these are UNOFFICIAL ALPHA BUILDS. This meaning nobody from the LiquidSmooth team should be expected to help you if you run into any issues. Bugs should be reported to THIS THREAD ONLY. I will do my best to address and fix them as I can. I'm not a master developer, just a builder. But I am learning, and I will try my best to track down fixes to relevant bugs.
Click to expand...
Click to collapse
KNOWN ISSUES
As reported by @rogersb11 in his CM12 thread, "If you don't have WiFi on the device will reboot upon going to sleep so LEAVE THE WIFI ON." This is a Lollipop bug in general, and currently has no fix.
SPECIAL THANKS
Special thanks to the entire LiquidSmooth team for building this awesome ROM. I just compile it from source for this device and the ROM would not be here without their dedication and hard work to provide it.
Special thanks also once again to @rogersb11 for his help and guidance and tireless work to bring the device tree up to be ready for Android 5.0 ... Seriously, this dude has coded his fingers to the bone to make this a reality. I wouldn't have this thread up and going already without him. So be sure to let him know how thankful you are for his work to keep this device alive.
XDA:DevDB Information
Unofficial LiquidSmooth v4.0 for the SGH-I777/959G, ROM for the AT&T Samsung Galaxy S II SGH-I777
Contributors
TheGeekyNimrod, rogersb11
Source Code: https://github.com/LiquidSmooth/android
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Current Beta Version: LiquidSmooth v4.0
Beta Release Date: 2014-12-06
Created 2014-12-07
Last Updated 2014-12-07
RESERVED
Reserved one more just because
TheGeekyNimrod said:
Reserved one more just because
Click to expand...
Click to collapse
Thanks for all the hard work. Just a quick question. I assume this isn't happening to everyone, but Google Play Services crashes, not allowing me to create my backup account. Does the same on the cm12 build.
omar71693 said:
Thanks for all the hard work. Just a quick question. I assume this isn't happening to everyone, but Google Play Services crashes, not allowing me to create my backup account. Does the same on the cm12 build.
Click to expand...
Click to collapse
Hmm. I'm not sure. Haven't had that issue. A guess says it could be the Gapps, but I can't say that for sure though because I tested with different Gapps than the ones listed. Have you tried going back and wiping Dalvik and reinstalling Gapps?
Sent from my SAMSUNG-SGH-I747
TheGeekyNimrod said:
Hmm. I'm not sure. Haven't had that issue. A guess says it could be the Gapps, but I can't say that for sure though because I tested with different Gapps than the ones listed. Have you tried going back and wiping Dalvik and reinstalling Gapps?
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
Yeah, I actually did. I'm going to try some other things throughout the day and report back.
OMG, I can't believe there is ANOTHER lollipop build for the s2 . Oh BTW where you listed me as a contributer if you remove the @ before my username it will link me correctly. You don't need that on DevDB. Just edit profect at the top and then it automatically links the username without the @ in those contributor boxes
omar71693 said:
Thanks for all the hard work. Just a quick question. I assume this isn't happening to everyone, but Google Play Services crashes, not allowing me to create my backup account. Does the same on the cm12 build.
Click to expand...
Click to collapse
Yah, I'm having the same google play services FCs. I also tried bpear's Lollipop Gapps and that didn't work either . . .
NOTE: I did have the same problem on @rogersb11 Cm12 build too
I tested this with the 5.0 gapps from here. But if you try it, you will have to strip a few unneeded apps out of it for the sake of internal storage space. I can't remember exactly which ones I pulled out of it, but you can pretty much just use Google Play, Play Services, and Google Services Frameworks, and download the rest from the PlayStore
rogersb11 said:
OMG, I can't believe there is ANOTHER lollipop build for the s2 . Oh BTW where you listed me as a contributer if you remove the @ before my username it will link me correctly. You don't need that on DevDB. Just edit profect at the top and then it automatically links the username without the @ in those contributor boxes
Click to expand...
Click to collapse
Got it. I'm really not sure I like how the whole DevDB thing works. Should have just started a regular thread
I may possibly have another build out tomorrow with a few minor tweaks and a little overhaul to the UI. I don't know about everyone else, but I don't like the dark background of, say, the settings app. I'll be working on this and a few minor things tomorrow.
Sent from my SAMSUNG-SGH-I747
I haven't been able to get a working system. It usually hangs on the boot animation (animation freezes). Sometimes it gets to the optimizing apps screen, but it will hang there too. However, if I do NOT flash gapps, it's able to boot, but then hangs on the welcome screen (it freezes and doesn't accept any input). Between failed boot attempts, I'll wipe everything or even go as far as reflashing.
Any ideas?
sciguy125 said:
I haven't been able to get a working system. It usually hangs on the boot animation (animation freezes). Sometimes it gets to the optimizing apps screen, but it will hang there too. However, if I do NOT flash gapps, it's able to boot, but then hangs on the welcome screen (it freezes and doesn't accept any input). Between failed boot attempts, I'll wipe everything or even go as far as reflashing.
Any ideas?
Click to expand...
Click to collapse
Don't bother wiping everything.. Tried that two different times, still having the same results as you. I reverted back to KK and I'm just gonna wait for another build.
Sent from my SGH-I777 using XDA Free mobile app
Remember these are alpha builds. While I haven't had that issue with it yet, doesn't mean it won't happen for others. On mine, once I got to the setup screen I had to reboot the first time, then it allowed me to skip through until I was able to enable the keyboard. And it worked fine after that.
It will stabilize as time goes by for sure.
Sent from my SAMSUNG-SGH-I747
I had hoped to have another build out today, but I had a learning curve to get through first. But now that I have learned, should be late tonight or tomorrow. Mainly UI fixes, maybe a tweak or two elsewhere.
Sent from my SAMSUNG-SGH-I747
Finally! Android L for my GS2! Now to wait for an at&t GS4 custom Lollipop ROM.
[Q] About booting this ROM
When I flash the shift eternal kernel does it give me the right clockwork mod recovery I need to flash the rom? If not,where can I download it?
StoneyJSG said:
When I flash the shift eternal kernel does it give me the right clockwork mod recovery I need to flash the rom? If not,where can I download it?
Click to expand...
Click to collapse
It comes with PhilzTouch which is very a custom recovery based on CWM. It will be the right version for you to flash this and also the version and kernel that the ROM will be running.
Sent from my SAMSUNG-SGH-I747
Was hoping to have a new build posted today, but there are a few too many quirks with it for me to feel comfortable putting it out there. It boots, but there's a few things going crazy. I do believe I can get it worked out though, and will try to get another build done and put out tonight or tomorrow.
Biggest change right now is that I have reverted the Material Dark theme in favor of the Material Light theme that Lollipop is more known for right now. In the future, according to one of LS's lead developers, there will be a switch to go between the two.
Anyhoo, carry on.
My internal storage is not working. Google play services not working. Browser is also not working. Unable to install any app at all. Very nice rom though. Once a stable version is released i will use it as daily driver.

[ROM] [AOSP 6.0.1_r46] [Abandoned] Clean Whale - Pure AOSP

MOD EDIT: THREAD CLOSED PER OP REQUEST
Mods: Feel free to lock this thread. I'm done with this. Reasoning below.​
Alright well, it was cool. I didn't realize how much went into ROMs [development]. I came into this way over my head and didn't do the proper bug checking before posting it. This was a learning experience for me, and I thought I had this figured out. Oops. I'm going to continue working with ROM source code and expanding my knowledge of this, but it'll be all a personal, private project. Thanks to the community for all of the guides they've posted on this site, and I hope one day I can do something meaningful for this community.
If you really want to run a pure AOSP ROM, you should try @freak97's master branch builds. His has the Verizon call audio issue just as this one does, and neither of us seem to know why that is, but hopefully he figures it out. Fair warning about his builds though, Netflix doesn't work on his ROM (he's probably missing the vendor files which are on this ROM which allow Netflix to work, because DRM), and the package installer will force close if you try to install an APK from outside of the Play Store.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is stock AOSP from the Google repos. It contains no extra features, other than the extremely small list below. Any additions to these builds will be purely for compatibility and to make the device easier to use (ex. Enabling tethering). I intend to keep this updated with each of the new releases which appear.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Then cry. Then laugh more.
*/
What is "Clean Whale"?
Clean Whale is a ROM for the Google Nexus 6! Why the name? Because it's essentially pure AOSP running on the Nexus 6. Clean Android, Nexus 6 (shamu). Clean Whale. Why did I make a name for it if it's just AOSP? Because I needed a name for the Github repo. Deal with it.
Features
As stated above, this is pure AOSP with minimal changes. Here's what I've done:
Enabled Tethering
MultiROM support
Encryption isn't forced
Stock AOSP boot animation
Unrooted (also no Busybox. Just install it with an app.)
Yeah, that's literally it.
Kernel
This ROM uses the stock AOSP kernel from Google. The only thing added to it is the kexec-hardboot patch for MultiROM support. Yes, you can use MultiROM with this as a primary or secondary. Enjoy.
Changelog is in second post
Requirements:
Unlocked bootloader
The latest version of TWRP
Install Instructions:
Download the ROM.
Boot into TWRP make backup, and wipe (System, Data, Cache)
Flash the ROM
Flash SuperSU and/or GApps if you wish to use them.
Boot up and enjoy pure AOSP!
NOTE: First boot and signing in (if using GApps) may lag a little bit. Not much I can do about that, sorry. It'll go away pretty quick (if you really don't want to deal with it, reboot immediately after first boot).
Root
As stated above, this doesn't come with root OR Busybox. Why? Becuase neither are included in the source code, and I want this to be as close to the original source as possible. You can get root by flashing SuperSU (I've only tested the latest BETA version) and you can get Busybox by installing it with an app from the Playstore (requires root).
Downloads
Latest - Clean Whale 1.1 (AOSP 6.0.1_r46) [NO LONGER UPDATED]
All releases (my AFH folder) [NO LONGER UPDATED]
I have extremely slow upload speed, so I upload new releases overnight while I'm asleep. If you wish to check if I've updated this to a new revision of 6.0.1, you can view my AFH folder here. It'll appear there before it does in the thread.
Recommend (and tested) GApps
BaNkS Dynamic GApps
SuperSU
SuperSU BETA
SuperSU Stable
Bugs/Issues
Verizon call audio is broken - Currently working on this.
You may get "Error 7: System partition has unexpected contents after OTA update" when flashing. 1.1 should fix it. If you get this error when flashing, please report it here and provide a recovery.log [Fix attempted]
I would just like to take a minute to say thank you to @fhem @Scott for their amazing work with their threads which teach the community about how to download and compile a ROM from source. They're the reason this is here, and they're the reason I've decided to start working with custom ROM source code. This is my first experience working with Android in this way, and I have them to thank. Also, since this is my first experience I may very well get some things wrong and/or manage to break this. If that happens, I'm sorry. I'm still learning.
Thank you all for this wonderful community, and I hope one day I can really get into true ROM development
XDA:DevDB Information
Clean Whale, ROM for the Nexus 6
Contributors
ryanguy426
Source Code: https://github.com/CleanWhale
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Abandoned
Current Beta Version: 1.1
Created 2016-06-13
Last Updated 2016-06-18
Changelog
Version 1.1 - June 16, 2016
Call audio is still broken, working on it right now.
Attempted to fix "Error 7" when flashing ROM in recovery
If you encounter "Error 7" when flashing, PLEASE provide a recovery.log when you report it. There's nothing I can do otherwise.
Version 1.0 - June 12, 2016
Initial release
Install may fail if you flash this, try 1.1 instead.
First
Sent from my Nexus 6 using XDA-Developers mobile app
ryanguy426 said:
I would just like to take a minute to say thank you to @fhem and @Scott for their amazing work with their threads which teach the community about how to download and compile a ROM from source. They're the reason this is here, and they're the reason I've decided to start working with custom ROM source code. This is my first experience working with Android in this way, and I have them to thank. Also, since this is my first experience I may very well get some things wrong and/or manage to break this. If that happens, I'm sorry. I'm still learning.
Click to expand...
Click to collapse
Thanks for kind words!!
It's always good to see new work. Welcome aboard and please keep it going.
I'm going to try this. I'm a fan of minimalist roms. Thanks for sharing it
Sent from my Nexus 6 using XDA-Developers mobile app
Count me in.
Sent from my Nexus 6 using XDA-Developers mobile app
I got error 7 when trying to install. Tried twice
Sent from my Nexus 6 using XDA-Developers mobile app
clippy83 said:
I got error 7 when trying to install. Tried twice
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
And what did the error say?
Great job. Everything works except Verizon call audio is broken (similar to Freak97 AOSP version). Very fast and slim. I like it overall :good:
clippy83 said:
I got error 7 when trying to install. Tried twice
Click to expand...
Click to collapse
Take a screenshot in TWRP and post it here please.
HueyT said:
Great job. Everything works except Verizon call audio is broken (similar to Freak97 AOSP version). Very fast and slim. I like it overall :good:
Click to expand...
Click to collapse
Wasn't aware of that, I don't normally get phone calls. I'll see what I can do about it.
I've also downloaded two different times in case of bad download & am also getting the error 7 msg. Also on latest twrp & full wipes both times.
rp076 said:
I've also downloaded two different times in case of bad download & am also getting the error 7 msg. Also on latest twrp & full wipes both times.
Click to expand...
Click to collapse
Same message I got thanks for posting haven't had a chance to post a screenshot
Sent from my Nexus 6 using XDA-Developers mobile app
rp076 said:
I've also downloaded two different times in case of bad download & am also getting the error 7 msg. Also on latest twrp & full wipes both times.
Click to expand...
Click to collapse
Alright, thanks. Looking into it.
I'm booting into Ubuntu now, I'll see if I can figure this out but I'm not experiencing the issue so it might be a while before I find a fix. I'll also see about fixing Verizon call audio as well.
rp076 said:
I've also downloaded two different times in case of bad download & am also getting the error 7 msg. Also on latest twrp & full wipes both times.
Click to expand...
Click to collapse
Upload a log and I'll look at it.
Made some changes which should fix Error 7, building now (gonna be a while... for some reason my ccache reset). As for the lack of call audio, I'm going to see if I can get any useful info from the logcat. I have a feeling I'm missing some libs.
ryanguy426 said:
Made some changes which should fix Error 7, building now (gonna be a while... for some reason my ccache reset). As for the lack of call audio, I'm going to see if I can get any useful info from the logcat. I have a feeling I'm missing some libs.
Click to expand...
Click to collapse
Just a suggestion, why not build from factory images that don't have the AOSP bugs?
ryanguy426 said:
Take a screenshot in TWRP and post it here please.
Click to expand...
Click to collapse
Seems like recovery.log would have had more information than a screen shot.
Yoinx said:
Seems like recovery.log would have had more information than a screen shot.
Click to expand...
Click to collapse
True, didn't think about that. Noob mistake on my part, though you're right. It could definitely give the answer. Although I updated the ota_from_target_files.py in build/tools/releasetools, which should fix the error (in theory).
RatchetPanda said:
Just a suggestion, why not build from factory images that don't have the AOSP bugs?
Click to expand...
Click to collapse
What exactly do you mean by this? Taking the factory images here and just uploading it with changes? Seems kind of pointless since there are multiple ROMs on here which are modded stock. Some people like 100% AOSP, and this is a good learning experience for me. I'm not very interested in modifying Google's factory images. I'll leave that to others
ryanguy426 said:
True, didn't think about that. Noob mistake on my part, though you're right. It could definitely give the answer. Although I updated the ota_from_target_files.py in build/tools/releasetools, which should fix the error (in theory).
What exactly do you mean by this? Taking the factory images here and just uploading it with changes? Seems kind of pointless since there are multiple ROMs on here which are modded stock. Some people like 100% AOSP, and this is a good learning experience for me. I'm not very interested in modifying Google's factory images. I'll leave that to others
Click to expand...
Click to collapse
You say modded stock is pointless but that's what this is :silly:
RatchetPanda said:
You say modded stock is pointless but that's what this is :silly:
Click to expand...
Click to collapse
Like I said, it's a learning experience for me more than anything else.

[ROM][MM][fireball] AICP - 11.0 [MODDED TWRP]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP​Android Ice Cold Project​
AICP is known by everyone as Ice Cold Project that started on Desire HD and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, Rom has always been AOKP based. Unfortunately, since AOKP either stopped development or will make a comeback later this year, we changed our base to CM when it comes to hardware, drivers and some features.
If there are any bugs, either we will sort them or CM team if it concerns their modifications. This rom isn't CM supported so no need to report errors or bugs to them!!
.
.
.
.
.
In the beginning we would like to thank:
CM team
maxwen
SlimBean rom team
CarbonRom team
LiquidSmooth rom team
Omni rom team
DU team
Community
@LorD ClockaN
@zipsnet
@n3ocort3x
@semdoc
@eyosen
@alienmind
@Chezbel
@Drgravy
@eboye
.
.
.
We are now paying for servers that build nightlies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 11
Download link: 11/19 fireball
GAPPS (OpenGapps): http://opengapps.org/
Full Changelog link: goo.gl/mIgmYG
You tell...
ROMS should contain everything you need to enjoy Marshmallow. You are not required to install any Add Ons, simply download the latest ROM, gapps, flash it, and go!
You are STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup - these can cause stability issues that are very hard to debug. If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience strange behavior.
How to flash:
Don't do it if you don't know it
ROM has gapps persistance in between dirty flashes
KERNEL:
Kernel in this rom follows CM source with custom additions.
PREREQUISITE FOR OTA:
To be able to flash over OTA app, TWRP recovery is needed.
You can still use CWM and OTA app, but only to download zip file and flash it manually from within recovery. Zip gets saved under AICP_ota folder on your internal SDcard.
If you want to contribute to the AICP or wanna see what is being worked on/merge feel free to visit our gerrit, link is at the bottom!!!
IceColdJelly AICP G+ community
XDA:DevDB Information
[ROM][MM][fireball] AICP - 11.0 [MODDED TWRP], ROM for the Verizon HTC Droid Incredible 4G LTE
Contributors
Beeko
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2016-09-19
Created 2016-09-20
Last Updated 2016-09-20
INITIAL RELEASE
- Must be on modified TWRP with fat/userdata swap HOW TO IS HERE
09/22/16
- Initial MM release
- CLEAN FLASH ONLY
10/23/16
- Hopeful fix for RIL problem
11/19/16 --WILL BE LAST PUBLIC RELEASE--
- ROM update and RIL fixed for sure
Download is live.
Can I get a mod to move this to the right forum and delete this post after?
Thanks for this update Hi bro I am using older version of this ROM so do I need to reinstall firmware and also again to all those methods I did in first time? Plus for some reason I m not able to send sms idk why... I tried many app but all failed anyways thanks for this update bro
Mak29 said:
Thanks for this update Hi bro I am using older version of this ROM so do I need to reinstall firmware and also again to all those methods I did in first time? Plus for some reason I m not able to send sms idk why... I tried many app but all failed anyways thanks for this update bro
Click to expand...
Click to collapse
No you don't need to do anything if you've already done the partition swap. I would make sure I am on MDMowers TWRP and you should be fine, don't dirty flash the ROM do clean flash only.
Beeko said:
No you don't need to do anything if you've already done the partition swap. I would make sure I am on MDMowers TWRP and you should be fine, don't dirty flash the ROM do clean flash only.
Click to expand...
Click to collapse
Thanks bro but with clean flash you mean wipe everything and then install ROM then gapps .?
And g apps suppose to be arm>6.0>aroma right?
Mak29 said:
Thanks bro but with clean flash you mean wipe everything and then install ROM then gapps .?
And g apps suppose to be arm>6.0>aroma right?
Click to expand...
Click to collapse
Yes, backup your stuff and wipe everything. And yes, you can use aroma if you'd like.
Any Specific Baseband?
Beeko, Is there a specific baseband/radio version for this ROM? I'm coming from PACROM 5.1.1 and the baseband that IT requires is installed. When I clean-flashed and booted phone into this ROM, I had no connection/wireless service. I'm going to attempt it again today and check out more possibilities I may have missed. Thank you for keeping this phone relevant and up to date.
actionville said:
Beeko, Is there a specific baseband/radio version for this ROM? I'm coming from PACROM 5.1.1 and the baseband that IT requires is installed. When I clean-flashed and booted phone into this ROM, I had no connection/wireless service. I'm going to attempt it again today and check out more possibilities I may have missed. Thank you for keeping this phone relevant and up to date.
Click to expand...
Click to collapse
I'll have to test when I get home, I don't think there were any new basebands so I'll look when I'm home.
Seems I can't get Verizon APN to show. I'll check the build and make a new one tonight/tomorrow
Beeko said:
Seems I can't get Verizon APN to show. I'll check the build and make a new one tonight/tomorrow
Click to expand...
Click to collapse
That is what I am seeing too, something like "apn not available for this user" or something similar - It won't allow me to add APN info.
actionville said:
That is what I am seeing too, something like "apn not available for this user" or something similar - It won't allow me to add APN info.
Click to expand...
Click to collapse
I'll be looking at it tonight/tomorrow. I've got some stuff for another device that I have to fix first tonight.
Beeko said:
I'll be looking at it tonight/tomorrow. I've got some stuff for another device that I have to fix first tonight.
Click to expand...
Click to collapse
As I said before, thanks for publicizing your interest in keeping this phone model "flowing". You have a donate paypal? I'll toss some bucks your way, since I have been using PacManRom, and now hearing from you about this...interactively. Glad to see people squeeze all performance out of (unsubsidized) 600.00 dollar pieces of gear, instead of contracts, latest and (perceived greatest) phone "upgrades".
---------- Post added at 08:32 PM ---------- Previous post was at 08:31 PM ----------
actionville said:
As I said before, thanks for publicizing your interest in keeping this phone model "flowing". You have a donate paypal? I'll toss some bucks your way, since I have been using PacManRom, and now hearing from you about this...interactively. Glad to see people squeeze all performance out of (unsubsidized) 600.00 dollar pieces of gear, instead of contracts, latest and (perceived greatest) phone "upgrades".
---------- Post added at 08:32 PM ---------- Previous post was at 08:31 PM ----------
Click to expand...
Click to collapse
I'm not accepting donations personally but thank you. I've been busy with other devices so I've kinda left this one in the dirt. But I'm gonna see what I can do for it here this next week or so.
New build in OP. Hopefully got the RIL problem fixed.
ROM update in OP, along with fixed RIL. Wasn't sure if it was working last build, tried with my SIM and it works fine.
Just wanted to pop in and say thanks for this ROM. It is really a great ROM. Super smooth and stable. It is not my main phone anymore but every now and then I switch to it for awhile for some reason. Not sure if it's the smaller size or the nostalgia (was my first smart phone), but I just can't seem to get rid of this phone. Was using your PAC Rom up until now, but it's good to get it updated to an MM based ROM for when I do use it.
Decryption Issues
Hi
when i turn on my htc it asks for a password..
could you provide it.
Beeko said:
ROM update in OP, along with fixed RIL. Wasn't sure if it was working last build, tried with my SIM and it works fine.
Click to expand...
Click to collapse
Thank you, again. The phone is like brand new with this Rom. No loggers, no adware shows up. Great having adaway built in. This Rom makes this old phone sooooo smooth, runs cooler, battery seems managed better. I'm not a fan of android coaxing me to format my SD to it, but I did (backed the contents up to Pc) so the phone has 32 gigs mem. Again, THANK YOU!
The only bug I have found so far, Is turning off mobile hotspot hangs, unless I restart, hotspot stays on. Sometimes I can get it to turn off if I tap hotspot settings or mess with wifi power button bar. On Pacman Rom, what fixed it for me was "allow wifi scanning even when wifi is off." I'm looking for similar settings to see if that does the trick.
Many Thanks Beeko!
Beeko said:
ROM update in OP, along with fixed RIL. Wasn't sure if it was working last build, tried with my SIM and it works fine.
Click to expand...
Click to collapse
Thanks for this rom, just posting this info for others who may want to know what it can/can't do.
I had a little trouble deciphering the conversion from stock to the swapped CM11/12 version ( I first tried what the page describes as for CM13 roms, but ended in boot loops with logcat choking on /data/media permissions)
ROM runs great. I had forgotten the issues with trying to get too many apps on the PacRom with stock partitions.
Data/cell seems fine, video playback excellent, it now makes for a nice portable media player.
I don't have it activated, so cant comment on the hotspot issue mentioned above but Bluetooth has issues.
Can turn on and see other devices, but I get the message "cant communicate to xx:xx:..." when trying to pair to a known working speaker.
A minor flaw in an otherwise great ROM.
Thanks for developing it.
edit: on a whim, I initiated pairing to my speaker, flipped the speaker's power on/off, and immediately the phone changed the mac address of the speaker to it's identifying name, and a pairing request popped up. Pairs successfully.

Categories

Resources