I compiled the GSI overnight, its aosp_arm64_a Legacy GSI, because the ones I keep downloading are all August security patch and I wanted it a little more up to date. I got the source directly from google and built it myself. AB is now uploaded as aosp_arm64_ab. A only is also up as aosp_arm64_a-aosp. I ran it on my One Plus 5, NFC was buggy but the camera, ril, Bluetooth, wifi, and everything I tried out worked. this is vanilla, so its bare bones. no apps besides the basics, no mods or any customizing. As this is a GSI it should be useable on many devices, I can only help you with the devices that I own, pixel XL and one plus 5. If you have a device other then that, you will have to find help from someone knowledgeable about that device. I have had success using twrp and fastboot to flash the system image. I was told doing it via fastboot is the best, so you can disable verified boot, then flash, then format all in one shot. My device did not require me to disable the verify boot. From my end it was literally as simple as 3 commands via fastboot and then restart the device and I was in. I flashed a 50mb gapps package from xda here, and magisk. took some photos, connected my Bluetooth speaker, made a call. sent some texts, installed a few apps. I will be staying on stock. But only because my device has stock pie, and the theming from one plus far trumps google.
aosp_arm_a-userdebug and aosp_arm_ab-userdebug added
https://mega.nz/#F!Xh4g2KSB!EJIGQtvLFKzHzqKXmZI7tg
Sources: https://source.android.com/setup/build/gsi
Do you find it smoother than HOS Pie Beta ?
Thanks for your share! Awesome, I don't need/use NFC.
korm85 said:
Do you find it smoother than HOS Pie Beta ?
Click to expand...
Click to collapse
It's very fast. install and boot was very fast. but I just discovered my home button does not work. however I don't assume that would be a difficult fix. the back and pages button are working. its very bare tho, you need to install everything you want manually. Which I prefer, it gives me more control over my phone I find. Hydrogen works ok too, it just requires a bit of work to get play store going and remove all the bloatware. GSI camera worked fine from boot.
Dzol Cp said:
Thanks for your share! Awesome, I don't need/use NFC.
Click to expand...
Click to collapse
upload is at finished now
can a mod change the title to reflect that this will have the AB and A GSI not just A? Please and thank you.
Thanks! Any chance of an arm build?
Got no boot ......?!
Device's nubia z17 sd835
91egt said:
Thanks! Any chance of an arm build?
Click to expand...
Click to collapse
yea, it will be up in the morning. I did A and just about done AB for arm64, then will do A and AB arm
aljoscha81 said:
Got no boot ......?!
Device's nubia z17 sd835
Click to expand...
Click to collapse
how did you flash it? I didnt use trwp, I used fastboot from the pc
godkingofcanada said:
how did you flash it? I didnt use trwp, I used fastboot from the pc
Click to expand...
Click to collapse
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
aljoscha81 said:
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
Click to expand...
Click to collapse
It shouldn't. But its twrp. Weird things happen. Use fastboot. Its only 3 or 4 steps. The tutorial is on the google gsi website. I tried via twrp and had no issues however. It started to launch then rebooted, second boot it loaded OK
Cracked screen. But you can see the build info
godkingofcanada said:
Cracked screen. But you can see the build info
Click to expand...
Click to collapse
Ok.. will test out with fastboot thanks a lot!
aljoscha81 said:
Ok.. will test out with fastboot thanks a lot!
Click to expand...
Click to collapse
No problem
AB will be posted in about 2-3 hours. After that I will build A only Arm. It should be available by morning.
a/b please
irfaniphank2 said:
a/b please
Click to expand...
Click to collapse
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
godkingofcanada said:
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
Click to expand...
Click to collapse
:good::good::good::good::good::highfive::highfive::highfive:
AB arm64 legacy is now uploaded to the link in post one. Arm A and AB will show up over night. Starting with a in the morning. It takes about 4.5 to 5 hours to build
Related
G'day guys and girls
I haven't seen PN source code updated for a while on the r33 side, seems they are focusing on the kernel a little bit
So I merged the tags myself and add some features to the ROM
I'LL TRY TO KEEP THE THREAD UPDATED, BUT THERES NO GUARANTEE ON THAT, THE REPO WILL PROBABLY BE UPDATED, IF YOU WANT TO BUILD YOURSELF, GO TO THE REPOSITORY DOWN BELOW
PLEASE NOTICE
This version was NOT signed by the PureNexus's certificates, please do a FULL FACTORY RESET if you are from the offical build.
I'm sorry for the inconvenience, but this is compulsory
Features
Built in GAPPS (no gmail, Google News and weather and play magazines, don't find them useful since I've got outlook and other replacement)
Built in Greenify
Android 7.1.2_r33 August security level
VoLTE tested
Lineage Terminal
ElementalX 1.15 Kernel (NTFS rw, exFAT, High Brightness Mode, Digital Gain control)
USB Patch for using the phone as a USB HID keyboard/mouse see here
All PureNexus Features
Untested
Since I am in Australia, there's no actual way to test whether Wi-Fi calling works, but it should work considering Project Fi was prebuilted. Please tell me if I need to add anything.
Magisk
https://forum.xda-developers.com/apps/magisk/unofficial-google-pixel-family-support-t3639262
Goodwin_c's magisk seems to work very well, thanks @goodwin_c
Known Bugs
OK Google detection is known to be not working in some languages (eg. Japanese)
MusicFX don't seems to open
Screenshots
https://ibb.co/m9XXz5
https://ibb.co/fL0Ke5
Downloads
https://drive.google.com/file/d/0B5ns3qw5ULWhTkZMQ2dVN0Z3LUU/view?usp=sharing
Flashing - How to
Please unzip the zip file, flash using fastboot commands
fastboot flash system_a /path/to/system.img
fastboot flash system_b /path/to/system.img
fastboot flash boot_a /path/to/boot.img
fastboot flash boot_b /path/to/boot.img
GitHub Source
manifest
patched kernel
Credits
the PureNexus Project https://github.com/purenexusproject
LineageOS https://github.com/lineageos
Pelya https://github.com/pelya/android-keyboard-gadget
flar2 (aka. Aaron Segaert) https://github.com/flar2
One thing I noticed is, I couldn't get Ok Google to work. Would say this language isn't supported
Sent from my Pixel XL using Tapatalk
It's asking me to flash NZH54D Vendor image but i'm on T-Mobile shouldn't my Vendor image be NKG47S...?
BHermes211 said:
One thing I noticed is, I couldn't get Ok Google to work. Would say this language isn't supported
Click to expand...
Click to collapse
Ok Google works fine for me but I still haven't updated the vendor image. I'm worried I'm gonna screw up the rom. I'm gonna test it now after flashing the correct vendor image.
Ok vendor has been updated and everything is working fine.
why is this being made ? is PN dead ? curious since i've been using my pixel less since i got the s8+
Delete.
TheUndertaker21 said:
why is this being made ? is PN dead ? curious since i've been using my pixel less since i got the s8+
Click to expand...
Click to collapse
If the official PN doesn't have a feature that a user wants, they are within their rights to build a version that incorporates that feature.
And in most cases, if the builder marks it as Unofficial (as is the case here), they are welcome to share it others, on the understanding that no support will likely be given from the official builder.
BHermes211 said:
One thing I noticed is, I couldn't get Ok Google to work. Would say this language isn't supported
Click to expand...
Click to collapse
Hey, there, actually I'm also having this problem. What language are you using? I am using Japanese and this problem presents, I thought it was Google's problem so I didn't care, I'll try figure it out.
EDIT: fixes typo
TheUndertaker21 said:
why is this being made ? is PN dead ? curious since i've been using my pixel less since i got the s8+
Click to expand...
Click to collapse
No, they aren't dead. they seems to focusing on other things especially the kernel and they are preparing for O since all the repos are being moved to the PureNexus-Legacy repo now. So I just built myself also add things for my own use.:fingers-crossed:
Pøîñtßlåñk said:
It's asking me to flash NZH54D Vendor image but i'm on T-Mobile shouldn't my Vendor image be NKG47S...?
Click to expand...
Click to collapse
I think it's probably fine. Since I'm using the international version so I'm just flashing the NZH54D vendor
cydia2020 said:
I think it's probably fine. Since I'm using the international version so I'm just flashing the NZH54D vendor
Click to expand...
Click to collapse
Worked fine thx.
BHermes211 said:
One thing I noticed is, I couldn't get Ok Google to work. Would say this language isn't supported
Click to expand...
Click to collapse
Do you see the same thing here
Pøîñtßlåñk said:
Worked fine thx.
Click to expand...
Click to collapse
Can you get OK Google to work? What language are you on. Cheers.
cydia2020 said:
Can you get OK Google to work? What language are you on. Cheers.
Click to expand...
Click to collapse
Works fine here English.
I was using English...
Sent from my Pixel XL using Tapatalk
BHermes211 said:
I was using English...
Click to expand...
Click to collapse
Hmm, that's weird. I'll try compile the official version on my 5x and see what happens
cydia2020 said:
Hmm, that's weird. I'll try compile the official version on my 5x and see what happens
Click to expand...
Click to collapse
Thank you. I'll be more than happy to give it a try again
Sent from my Pixel XL using Tapatalk
MusicFX don't seems to open in case you're concerned.
cydia2020 said:
Hmm, that's weird. I'll try compile the official version on my 5x and see what happens
Click to expand...
Click to collapse
Question... Is there a way to remove system apps on this rom? I've tried to remove the YouTube app even with magisk installed it gives apps that are able to remove system apps root permission but in the app remover app itself it says that I'm not rooted
Lock this thread.
Is the magisk zip only for mido? Or is it generic as well?
I only have mido for testing , but it should be universal. I should build an image with su for treble devices without twrp, I guess.
An alpha build of twrp is available for the Honor 9 lite. I'll test in the next 24 hrs and report here.
Working on any Treble supported device right?
It should work on any device phh-treble works.
Would you be interested in adding fixes for the Huawei mate 10 pro ?
I could try to play the guinea pig.
Maybe a secondary flashable zip / kernel would do the job as not much has to be fixed...
Have you tried the current build? I would like to know the issues with huawei treble devices.
pchatzop said:
Have you tried the current build? I would like to know the issues with huawei treble devices.
Click to expand...
Click to collapse
Downloading mate. I will flash with my p10+. Btw, im using carbon rom atm.
Work on mido.
Bootloops on my Huawei P Smart. Phh's V12 ROM works Ok though.
Good to know. It may be a problem with dm-verity, will patch it on the next build.
pchatzop said:
Good to know. It may be a problem with dm-verity, will patch it on the next build.
Click to expand...
Click to collapse
Booted with my p10+ but every I reboot got this mate.
pchatzop said:
Good to know. It may be a problem with dm-verity, will patch it on the next build.
Click to expand...
Click to collapse
Likewise, the ROM cannot be charge when turnoff same with treble (boot you in recovery mode). However, you may check carbon rom of honor view 10 as it can be charge when turnoff (also, the supercharge is enable when off)
Anyone tested on Redmi 3s
Just installed it on my Mido with nano GApps and provided Magisk, running fine for now, will test on!
Thank you very much for your work, for some Reason I can't use Thanks Button the last days but feel thanked and hugged for that you, Sir, made my Day!
pchatzop said:
Have you tried the current build? I would like to know the issues with huawei treble devices.
Click to expand...
Click to collapse
Can I simply replace my actual LineageOS build with yours ?
I got many things running in a way I can keep it as a daily driver and I sadly can't make a TWRP backup as TWRP can't decrypt our device for the moment.
ChriKn said:
Can I simply replace my actual LineageOS build with yours ?
I got many things running in a way I can keep it as a daily driver and I sadly can't make a TWRP backup as TWRP can't decrypt our device for the moment.
Click to expand...
Click to collapse
May cause you bootloop. Better backup your data/files. I used titanium backup :good:
v0ne said:
May cause you bootloop. Better backup your data/files. I used titanium backup :good:
Click to expand...
Click to collapse
I just have gotten a working phone after 3 days of work, I prefer to keep it this way
But once TWRP backups are feasible, I will of course try this
ChriKn said:
I just have gotten a working phone after 3 days of work, I prefer to keep it this way
But once TWRP backups are feasible, I will of course try this
Click to expand...
Click to collapse
If you're using the Treble LOS right now, you will not find anything in this Rom that will not work for you, I think.
Been using it for a few hours and no Problems popped up!
Set up with
opengapps (Mini), Magisk from OP and Pixel2 Experience Module.
Battery seems to be good for now, all Basics like WhatsApp, GMail, Messenger, Maps (GPS), Spotify with Bluetooth Car Audio (excellent sound), Mi Band 1s do work. And it has March Security Patch.
Of course it's just a few hours but till now, it's just awesome!
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
new build the problem detection card corrected sim recognizes them
the bad the camera does not work and is slow.
Download link: https://github.com/EnesSastim/Downl...A-2018-09-20/PixelExperienceP-arm64-aonly.zip
sgt_peppers said:
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
The sim card it's not working in my case ..any suggestion?
Xiaby said:
The sim card it's not working in my case ..any suggestion?
Click to expand...
Click to collapse
Not in my particular case. Maybe flashing magisk?
sgt_peppers said:
Not in my particular case. Maybe flashing magisk?
Click to expand...
Click to collapse
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Xiaby said:
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Click to expand...
Click to collapse
works perfect just that you notice the temperature is somewhat high at times
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
Thank you trying it later
Xiaby said:
Thank you trying it later
Click to expand...
Click to collapse
Restart my device and now the SIM does not recognize me
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
could ytou please share a link to the latest firmware? I cannot seem to find it on this site?
CAn i just use TWRP?
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Andrikkos said:
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Click to expand...
Click to collapse
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
The_real_hati said:
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
Click to expand...
Click to collapse
Can you share the firmware link ?
Andrikkos said:
Can you share the firmware link ?
Click to expand...
Click to collapse
https://xiaomi.eu/community/
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
yes finally lol. Thanks a bunch i could not find the firmware anywhere
---------- Post added at 06:44 AM ---------- Previous post was at 06:38 AM ----------
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
Mate? No firmware/ Just another site link to get lost in? :-\
Bryceicle1971 said:
Mate? No firmware/ Just another site link to get lost in? :-\
Click to expand...
Click to collapse
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
The_real_hati said:
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
Click to expand...
Click to collapse
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Bryceicle1971 said:
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Click to expand...
Click to collapse
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
https://androidfilehost.com/?fid=1322778262903998408
The_real_hati said:
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
Click to expand...
Click to collapse
Whatever. Your being obnoxious. Given up on Android P. Overheats an RIL issues. Every time. And you just proved my point
sgt_peppers said:
Restart my device and now the SIM does not recognize me
Click to expand...
Click to collapse
Did yuo find any solution?
Hi all,
One of the things that was missing for me was the center clock.
The void in the middle needed to be filled so here you have a module to place the clock smack in the middle, it's not off center like previous mods, this one is as it should be.
Flashing always at your own risk, please read all instructions before flashing, module has been tested and is working on the latest android 11 BA running OOS, untested on non OOS ROM's
NOTES
-----------------
This will cause issues with android auto!
Does not work on Android 10
Confirmed working on Android 11 open beta 2
Confirmed working on Android 11 open beta 3
Confirmed working on OB4
Confirmed working on stable 11.0.2.2
Installation
-------------------
Pre-requisites
Rooted Oneplus 8 Pro
Android 11 Stable
Magisk Manager
Installation instructions
1. Download the module from here:
11.0.0 https://mega.nz/folder/OB8hXYqK#4hVILxDw-K7EKemL3FDNwQ
11.0.1.1
https://mega.nz/folder/SJ1G1RCD#izqB8T5SrK-uPiV4GVrTdQ
11.0.2.2
2.51 MB folder on MEGA
mega.nz
11.0.4.4
0 byte folder on MEGA
mega.nz
11.0.5.5
the module for 4.4 seems to be working fine for 5.5
If you have issues then disable it, reboot, re-enable then reboot and test.
11.0.6.6
2.51 MB folder on MEGA
mega.nz
11.0.7.7
Use the 0.6.6 version, it reloaded first time for me, i don't believe they changed OPSystemUI.apk so it's probably the exact same apk.
11.0.8.8
2.51 MB folder on MEGA
mega.nz
11.0.9.9
As this is only Octobers security update you can continue to use 11.0.8.8 thanks @mac796 for clarifying functionality.
11.0.10.10
Again no changes to OPSystemUI.apk so the previous release will continue to work on this version
2. Copy to your phones storage
3. Open Magisk and select the modules icon
4. Click "Install from storage"
5. Navigate to the downloaded folder and choose the zip inside.
6. Allow it to complete and then reboot.
Enjoy your center clock leave a thanks, let me know if it doesn't work and will do what we can to help.
Right side clock mod
---------------------------
Android 11.0.2.2
2.51 MB folder on MEGA
mega.nz
Thanks @Lycidias for testing
Troubleshooting
------------------------------
Magisk module failure.
This works for any magisk module failure.
1. Power off your phone by holding the power button, then turn it back on.
2. As your phone gets to the bootloader warning screen, press and hold volume up and down and continue to hold until the phone shows the boot animation.
3. You'll boot to safe mode, simply reboot once more.
4. On next boot all your magisk modules will be disabled, remove the problematic module and re-enable the functional ones.
Original mod made by
11-11.0.2.2
@Tulsadiver & @dianoandr tested by myself, absolutely massive thanks to them for this.
11.0.4.4 and onwards made by myself, original pixel version by Tulsadiver
REQUESTS
----------------
I can maybe do requests, but they won't be a priority and if i don't have the device, you will have to provide me the files required and give me the android version you're on, OS and you'll be testing too.
Oneplus 8T
------------
OOS 11.0.10.10 KB05BA
2.51 MB folder on MEGA
mega.nz
Thanks to @zarcom for testing
Enjoy
Did not work for A10
Works perfect on 11. Thank you.
[MOD EDIT: REMOVED OP QUOTE]
Any chance for porting to A10?
crazynapkinman said:
Any chance for porting to A10?
Click to expand...
Click to collapse
Can ask pal..will be tomorrow tho.
Why don't you just update to 11. It's way better than 10 anyway.
scott45333 said:
Works perfect on 11. Thank you.
Click to expand...
Click to collapse
Welcome.
crazynapkinman said:
Did not work for A10
Click to expand...
Click to collapse
Thanks for testing btw
dladz said:
Can ask pal..will be tomorrow tho.
Why don't you just update to 11. It's way better than 10 anyway.
Click to expand...
Click to collapse
I don't have an easy route to 11.
I'm on a Sprint\Tmo OP8.
I don't have Local Upgrade.
OTA disabled due to root and Tmo hasn't finished A11 anyway.
I'm hoping someone will make a A11 full rom to flash via TWRP to get me there
crazynapkinman said:
I don't have an easy route to 11.
I'm on a Sprint\Tmo OP8.
I don't have Local Upgrade.
OTA disabled due to root and Tmo hasn't finished A11 anyway.
I'm hoping someone will make a A11 full rom to flash via TWRP to get me there
Click to expand...
Click to collapse
Oh wow. What about converting to global?
dladz said:
Oh wow. What about converting to global?
Click to expand...
Click to collapse
I've been reading that thread for days and only get more confused the more I read...
I have to MSM back to stock? Then convert via fastboot? Idk... Very confusing reading it all.
Or I'm just too dense.
crazynapkinman said:
I've been reading that thread for days and only get more confused the more I read...
I have to MSM back to stock? Then convert via fastboot? Idk... Very confusing reading it all.
Or I'm just too dense.
Click to expand...
Click to collapse
Lol nah it's worrying doing these things but it's not usually as hard as you think.
Get it planned out before hand, I've rebranded before, on the p20 pro and I think a few HTC devices.
You'd be hard pushed to brick a OnePlus phone tbh.
But you're right to be careful. Just make a back up first.
dladz said:
Lol nah it's worrying doing these things but it's not usually as hard as you think.
Get it planned out before hand, I've rebranded before, on the p20 pro and I think a few HTC devices.
You'd be hard pushed to brick a OnePlus phone tbh.
But you're right to be careful. Just make a back up first.
Click to expand...
Click to collapse
Yeah. I got a backup of persist.img and boot partition.
I need to backup everything via TWRP?
Thanks much appreciated
Sent from my OnePlus IN2020 using XDA Labs
Thanks for this!! Really like centre clock One thing....now left side is disturbingly empty
hard case-never satisfied
But thank you!!
janitor9 said:
Thanks for this!! Really like centre clock One thing....now left side is disturbingly empty
hard case-never satisfied
But thank you!!
Click to expand...
Click to collapse
Haha it is check mine out though.
That's called energy ring.
crazynapkinman said:
Yeah. I got a backup of persist.img and boot partition.
I need to backup everything via TWRP?
Click to expand...
Click to collapse
So persist and boot is fine. But you probably won't be needing any of them.
As for the rest of it, backing up via twrp is one thing but at the point there ain't a functional copy of twrp for 11.
So backing up to twrp might not be the best idea.
I got out all my pics, vids, music, synced contacts with an account (Google) or sync everything to Google (I don't mean a back up as a single image, that's your choice)
Apps I would make a titanium back up of.
Then theres pretty much nothing left.
Copy all the titanium files out, that'll serve you well when you're ready to restore.
Then head down the rebranding route..
I'm not great with changing variant but I would back up also maybe your EFS partition if that's still a thing (IMEI's) just because of the networks hold on things, I can't think of anything else you could lose out on..
I'll check out the rebranding guides and see if I can make easier sense of it for you.
dladz said:
Haha it is check mine out though.
That's called energy ring.
Click to expand...
Click to collapse
Can you help me with a notchkiller mod that works on oxygenos 11 stable?
So far every mod i have used results in a bootloop
Blackdranzer said:
Can you help me with a notchkiller mod that works on oxygenos 11 stable?
So far every mod i have used results in a bootloop
Click to expand...
Click to collapse
We have no notch on the 8 pro?
dladz said:
We have no notch on the 8 pro?
Click to expand...
Click to collapse
Sadly some games and streaming apps like amazon prime display below the front canera....the result is a black bar just till the front camera
The notchkiller mods solved that issue but none of them working on android 11 so i was just asking if there any compatible version of the mod
Earlier netflix had this problem too but now they have solved it.
Blackdranzer said:
Sadly some games and streaming apps like amazon prime display below the front canera....the result is a black bar just till the front camera
The notchkiller mods solved that issue but none of them working on android 11 so i was just asking if there any compatible version of the mod
Earlier netflix had this problem too but now they have solved it.
Click to expand...
Click to collapse
There's a feature to change screen in android 11.
Plus you have the cut out option in display.
Hi everyone, I've been trying to find a custom rom for Xiaomi Mi 12X, but none found so far. I tried to port Pixel Experience rom using the Xiaomi Mi 11X (alioth) device tree and changed accordingly, since the SOC and almost all specs are the same except Camera. Can anybody shed some light in how to correctly port the ROM for my devices without official device tree from LineageOS or Pixel Experience? Thank you.
Anybody has any suggestions?
JChanMe said:
Anybody has any suggestions?
Click to expand...
Click to collapse
Hi, right now I'm using crdroid gsi, which works pretty good. Except of fp, everything works as it should. It's smooth, has a good bb and even MGC's Gcam 8.1, last stable, works incl. portrait, nightmode and with all lenses (ok, no pixelbinning). Installing is pretty simple: use fastbootd and just fash img to system. That's it....
Voodoojonny said:
Hi, right now I'm using crdroid gsi, which works pretty good. Except of fp, everything works as it should. It's smooth, has a good bb and even MGC's Gcam 8.1, last stable, works incl. portrait, nightmode and with all lenses (ok, no pixelbinning). Installing is pretty simple: use fastbootd and just fash img to system. That's it....
Click to expand...
Click to collapse
Thank you but I don't see it on crdrood website, did you build it yourself?
JChanMe said:
Thank you but I don't see it on crdrood website, did you build it yourself?
Click to expand...
Click to collapse
It's a gsi treble rom (that works with many vendors)... Just search for project treble on xda!
Voodoojonny said:
It's a gsi treble rom (that works with many vendors)... Just search for project treble on xda!
Click to expand...
Click to collapse
Thank you. I figured it out and tried a few treble roms including pixel experience, there are a few problems including auto brightness, fingerprint and vibrator. You had the same problems?
JChanMe said:
Thank you. I figured it out and tried a few treble roms including pixel experience, there are a few problems including auto brightness, fingerprint and vibrator. You had the same problems?
Click to expand...
Click to collapse
Yes, especially the sound makes problems... When usung videocall, it's awfully distorted. I'm using stock for now. With Lawnchair and some modifications it's ok for now.
Do you know, why there's no thread for our phone here?
Just seen, you are forking some repositories... Have you been successful in building?
Voodoojonny said:
Just seen, you are forking some repositories... Have you been successful in building?
Click to expand...
Click to collapse
I successfully build the ROM without errors, just some warnings, but it didn't boot aftter flashing it.
JChanMe said:
I successfully build the ROM without errors, just some warnings, but it didn't boot aftter flashing it.
Click to expand...
Click to collapse
Did you flash with vendor or system only?
Voodoojonny said:
Did you flash with vendor or system only?
Click to expand...
Click to collapse
No, I used the same procedure as described for Alioth device, fastboot flash boot boot.img, then from recovery use adb push to update the zip ROM file.
JChanMe said:
No, I used the same procedure as described for Alioth device, fastboot flash boot boot.img, then from recovery use adb push to update the zip ROM file.
Click to expand...
Click to collapse
But how did you built the rom. Did you get out a flashing zip directly? Normally, you create different partitions as fas as I know... Would you share your rom? Btw. which one did you build?
Voodoojonny said:
But how did you built the rom. Did you get out a flashing zip directly? Normally, you create different partitions as fas as I know... Would you share your rom? Btw. which one did you build?
Click to expand...
Click to collapse
Yes, after building I got a zip and flashing it using update by adb push. I built Pixel Experience Android 11
JChanMe said:
Yes, after building I got a zip and flashing it using update by adb push. I built Pixel Experience Android 11
Click to expand...
Click to collapse
But you used the lineage device tree. And PE is aosp not lineage. Might that be the problem? Would you try to build crdroid? Or instruct me how to setup a build environment?
No, I used the PE device tree, not Lineage. I used the build instructions provided by Pixel Experience for Alioth.
JChanMe said:
Anybody has any suggestions?
Click to expand...
Click to collapse
Yesterday xiaomi released kernel for 12x on GitHub. So I think now you can build pe/los without troubles
Maxletsplay_1 said:
Yesterday xiaomi released kernel for 12x on GitHub. So I think now you can build pe/los without troubles
Click to expand...
Click to collapse
Didn't they release the kernel when the phone was released?
JChanMe said:
Didn't they release the kernel when the phone was released?
Click to expand...
Click to collapse
Technically yes, but i've checked GitHub(about month ago) and I didn't saw kernel for this phone, just an empty folder
JChanMe said:
Didn't they release the kernel when the phone was released?
Click to expand...
Click to collapse
Did you replaced vendor libs with libs from 12x and other stuff like fstab, bins, rc files..configs? Attach logs from boot if you decide to build again. My advice is to build as eng and disable encryption, put selinux to minimal mode, nuke livedisplay, import vendor modules if you build with stock prebuilt kernel. Always look for F Linker errors in log and resolve them.
I'm waiting for AOSP rom too.