Related
I777 Builds: http://dl.omnirom.org/i777/ [courtesy of @Entropy512*]
ChangeLog: https://changelog.omnirom.org/#/i777/next
ChangeLog: http://omni.cmxlog.com/4.4/i777/
Wiki: http://docs.omnirom.org/Main_Page
Gerrit: https://gerrit.omnirom.org/
Butracker: http://jira.omnirom.org
G+ community
Be Advised:
=================
- Root access is not included by default. Flash SuperSU for root (Step 4 below)(also see "SURVIVAL" note).
- Feel free to leave bug reports on the bugtracker.
- This firmware will install TWRP as your device recovery. (To use OpenDelta with CWM, disable [secure] in {system updates})
-o- internal sd-card files are located at "emmc"
-o- to get back to CWM, see notes below.
Recovery requirement (prior to flashing this firmware):
================
CWM 6.0.4.4+
--OR--
TWRP 2.6.3.0+
-Renderbroken's OmniROM kernel
-or- Flash Omni's Boot.IMG via MobileOdin
--------------------------------
SGH-S959G; (courtesy of @mr-cook)
TWRP 2.6.3.0.zip
--OR--
CWM 6.0.4.5.zip.
Initial Installation:
=================
FLASH:
1) mr-cook's ROM wipe script
2) OmniROM: http://dl.omnirom.org/i777/
3) 4.4 Gapps: >PA 0 day< MICRO recommended (see GApps note)
4) ROOT access: Super-SU (optional)
Updating Nightlies (manual or OTA):
=================
FLASH:
1) OmniROM: http://dl.omnirom.org/i777/ (See "SURVIVAL" note)
-Happy Flashing
-Cyril
*Ownership:
Entropy512 said:
I'll create an official thread for this eventually... I suck at XDA threads for the devices I work on, as anyone who has seen the i777 CM threads can attest.
Yeah, I'm the one that did the bringup for the I777 (with help from many of the n7000 guys for general 4.4 bringup stuff).
Just as a warning the device is pretty low on my priorities list - it's kind of in automode. Of course, submissions to Omni gerrit are always welcome![...]
Click to expand...
Click to collapse
KNOWN ISSUES:
Attaching picture from camera folder crashes messaging
http://jira.omnirom.org/browse/OMNI-740
Click to expand...
Click to collapse
Repeated/frequent voice typing on AOSP keyboard causes soft reboot
http://jira.omnirom.org/browse/OMNI-739
Click to expand...
Click to collapse
menu-button unlocks device when feature is disabled UNTIL feature is toggled on and off again
http://jira.omnirom.org/browse/OMNI-138
Click to expand...
Click to collapse
Music player stops playing music from sd after some time
http://forum.xda-developers.com/showthread.php?t=2612329&page=18
http://forum.xda-developers.com/gal...l-cm11-omni-4-4-slimkat-t2222843/post51005727
Best workaround as of 2014, April 5: http://forum.xda-developers.com/showpost.php?p=51657055&postcount=304
Also, formatting both internal and external SD cards to exfat seem to solve the immediate issue, but do not solve the root fuse-daemon problem.
The internal SD card of the i777 can be formatted via ADB console in windows, or using exfat-utils in ubuntu
Click to expand...
Click to collapse
NOTES:
GApps: The size of full Gapps packages crowds /system, preventing the use of other /system based units (art, xposed, etc). Micro Gapps + google play installation of desired addons is a more efficient approach considering the resources available.
Click to expand...
Click to collapse
SURVIVAL: Go to super SU settings and install backup script. Root will survive updates. As for gapps, most installs include backup scripts. You don't need to re-flash them.
in system/addon.d, you should have a 99-supersu.sh, and 70-gapps.sh backup scripts, which survive the Rom update.
The script backs up beforehand and will restore after the flash.
From the backup script..
#!/sbin/sh
#
# /system/addon.d/99-supersu.sh (root:root 755)
# During an upgrade, this script backs up SuperSU-related files,
# /system is formatted and reinstalled, then the files are restored.
#
(info collected from this G+ conversation)
Click to expand...
Click to collapse
How to install CWM from TWRP?
3men2 said:
Boot into TWRP recovery
choose Install
Go to emmc to acces the internal sdcard and go to where you have the kernel with cwm( Siya, AJK, STI)
Flash the Kernel, when finished DON'T TOUCH REBOOT SYSTEM, Just go back to previous screen and choose the reboot to recovery option.
You will boot into CWM now and will be able to wipe everything without issues...
Click to expand...
Click to collapse
MobileOdin Install:
(procedure verified working (running SHOstock & Jeboo Kernel, & AT&T stock-rooted firmware) as of 2013-12-13 12:49):
With your phone on fully booted into (whatever ROM)
1) Gather all necessary flash files onto internal sdcard before performing these steps.
---a) Boot.IMG (extracted from omni-4.4.x-latesti777-nightly.zip)
---b) MrCook's ROM wipe.zip
---c) Omni-nightly.zip
---d) PA GApps (optional)
---e) SuperSU (optional)
2)Mobile-odin flash Omni's boot.img
>>the phone will try to reboot, but will likely fail. Three-finger salute (with the USB cable UNPLUGGED), until you are in TWRP recovery<<
3) [install] > [COOK'S ROM WIPE.zip] > [add more zips] > [omni-4.4.x-latesti777-nightly.zip] > [add more zips as desired] >>swipe to confirm flash>> [reboot system]
Click to expand...
Click to collapse
Spinergy02 said:
[...]"In system root data folder (/data) make a blank file named local.prop
Edit the file and add qemu.sf.lcd_density=195 I set my density to 195.
Set permissions to 644 (rw/r/r)"
So apparently settings in local.prop override build.prop and aren't lost when flashing a new nightly. I'd guess this would work for any settings that you wanted to retain between flashes. [...]
Click to expand...
Click to collapse
cyril279 said:
http://dl.omnirom.org/i777/
-Happy Flashing
-Cyril
Click to expand...
Click to collapse
Thanks! I will flash and test it out!
Running this as I type. So far so good. I'm on ST version
Sent from my SGH-959g using Tapatalk 2
Can this ROM dance with the AJK kernel?
atvspecialties said:
Running this as I type. So far so good. I'm on ST version
Sent from my SGH-959g using Tapatalk 2
Click to expand...
Click to collapse
What gapps did you flash?
BInspirinG said:
What gapps did you flash?
Click to expand...
Click to collapse
I myself flashed ParanoidAndroid's 4.4 GApps.
Untitled87 said:
Can this ROM dance with the AJK kernel?
Click to expand...
Click to collapse
Unfortunately, as of v4.9, it is not compatible with KitKat in general.
azeem40 said:
I myself flashed ParanoidAndroid's 4.4 GApps.
Unfortunately, as of v4.9, it is not compatible with KitKat in general.
Click to expand...
Click to collapse
Could you provide the steps in which you flashed this rom? I wiped both flashes, system and data. I've tried flashing 3 times now, but the only thing it'll do is reload and then go back into recovery mode.
I've always noticed that it says:
"script succeeded: result was [/system]"
Any help with the direction I should take?
Steps:
1) mr cook's ROM wipe script
2) Flash Omni
3)Flash PA 4.4 Gapps
BInspirinG said:
Could you provide the steps in which you flashed this rom? I wiped both flashes, system and data. I've tried flashing 3 times now, but the only thing it'll do is reload and then go back into recovery mode.
I've always noticed that it says:
"script succeeded: result was [/system]"
Any help with the direction I should take?
Click to expand...
Click to collapse
BInspirinG said:
Could you provide the steps in which you flashed this rom? I wiped both flashes, system and data. I've tried flashing 3 times now, but the only thing it'll do is reload and then go back into recovery mode.
I've always noticed that it says:
"script succeeded: result was [/system]"
Any help with the direction I should take?
Click to expand...
Click to collapse
I factory reset, wiped cache, wiped dalvik, installed Omni, installed Gapps, and rebooted phone.
I used the gapps linked in RenderBroken's 4.4. I also had to use the supersu option as root didn't show up. :thumbup::thumbup::thumbup::thumbup:
Sent from my SGH-959g using Tapatalk 2
azeem40 said:
I factory reset, wiped cache, wiped dalvik, installed Omni, installed Gapps, and rebooted phone.
Click to expand...
Click to collapse
BInspirinG said:
Could you provide the steps in which you flashed this rom? I wiped both flashes, system and data. I've tried flashing 3 times now, but the only thing it'll do is reload and then go back into recovery mode.
I've always noticed that it says:
"script succeeded: result was [/system]"
Any help with the direction I should take?
Click to expand...
Click to collapse
You may also need to update your recovery by flashing the last CM Nightly. Thats what i did and I had no issues.
I'll create an official thread for this eventually... I suck at XDA threads for the devices I work on, as anyone who has seen the i777 CM threads can attest.
Yeah, I'm the one that did the bringup for the I777 (with help from many of the n7000 guys for general 4.4 bringup stuff).
Just as a warning the device is pretty low on my priorities list - it's kind of in automode. Of course, submissions to Omni gerrit are always welcome!
And if any I9100ers drop by and wonder why there is no I9100 yet - I don't own one, and I'm not sure what happened to xplodwild's... I think his might be dead.
OmniRom nightlies for i777 use TWRP RECOVERY
I haven't been this happy about a release in god knows how long. I just did a FULL-ON HAPPY DANCE!
@Entropy512, I didn't mean to steal your thunder, I was excited to share your released work with the community.
I have tried manually wiping and formatting, along with using the rom script by cook. Both yields the same results for me. All 4 tried have been from the 11/26 CM 10.2 nightly.
Basically, after my wiping and flashing processes, the phone just reboots into recovery again.
I'm running this one.
http://dl.omnirom.org/i777/omni-4.4-20131127-i777-NIGHTLY.zip
These gapps
http://d-h.st/PbA
Sent from my SGH-959g using Tapatalk 2
I'm running the 1127 nightly with PA-Gapps (Modular Full).
When you're playing music on either the built-in player or Google Music, you get a ~1sec audio error (not a skip, more like a digital stutter) when the screen goes off and when you unlock.
I also switched to ART to see if it made any difference in the above. It didn't.
Not huge, just reporting.
auTONYmous said:
I'm running the 1127 nightly with PA-Gapps (Modular Full).
When you're playing music on either the built-in player or Google Music, you get a ~1sec audio error (not a skip, more like a digital stutter) when the screen goes off and when you unlock.
I also switched to ART to see if it made any difference in the above. It didn't.
Not huge, just reporting.
Click to expand...
Click to collapse
Idk why, but whenever I switch over to art with that same gapps package, I get force closes left and right. Weird...
---------- Post added at 04:05 PM ---------- Previous post was at 03:46 PM ----------
I have noticed that this ROM give me pretty bad battery life. Otherwise, performance is great. I will report back tomorrow night for my final verdict on battery life.
auTONYmous said:
I'm running the 1127 nightly with PA-Gapps (Modular Full).
When you're playing music on either the built-in player or Google Music, you get a ~1sec audio error (not a skip, more like a digital stutter) when the screen goes off and when you unlock.
I also switched to ART to see if it made any difference in the above. It didn't.
Not huge, just reporting.
Click to expand...
Click to collapse
Yepp that basically ear-raped me the first time it happened. And the second. Thats when I stopped listening to my music hahaha.
More customization coming soon?
Will the security element emulation for wallet become implemented? I always wanted to use NFC payment on this phone
Sent from my SGH-I777 using Tapatalk
Hi guys,
I want to present you freshly cooked fork of The Pure Nexus Project ROM compiled with UBERTC 4.9.4 and flags from JustArchi's commit.
Features:
Built on Ubuntu 14.10
Switched host toolchain to 4.8
Switched ROM & kernel toolchain to UBERTC 4.9.4
JustArchi's Optimizations included
For all ROM features go to orginal thread
Click!
Download:
removed
Changelog:
26082015
New switches in settings
25082015
25082015 r2
Updated WebView
25082015
Initial Release
Highly recommended kernel:
Blu_Spark built with UBERTC 4.9.4 and few more optimization flags
Click!
Credits:
JustArchi for Optimization commit
BeansTown106 for Pure Nexus
Cl3Kener for UBERTC
me for free time
If you want to support student and his work:
Dirty flash when we come from original?
abalam said:
Dirty flash when we come from original?
Click to expand...
Click to collapse
I don't recommend this, for best result go for clean install.
mastero9017 said:
I don't recommend this, for best result go for clean install.
Click to expand...
Click to collapse
Yeah thought so, the golden rule. Tnx for building!! Report later.
screenshot please
support RRO or CM?
michelemascia7 said:
screenshot please
Click to expand...
Click to collapse
Added in OP. For more go to orginal thread
http://forum.xda-developers.com/google-nexus-5/development/rom-pure-nexus-project-layers-t3158484
holigan360 said:
support RRO or CM?
Click to expand...
Click to collapse
For all features go to this thread
http://forum.xda-developers.com/google-nexus-5/development/rom-pure-nexus-project-layers-t3158484
mastero9017 said:
Added in OP. For more go to orginal thread
http://forum.xda-developers.com/google-nexus-5/development/rom-pure-nexus-project-layers-t3158484
For all features go to this thread
http://forum.xda-developers.com/google-nexus-5/development/rom-pure-nexus-project-layers-t3158484
Click to expand...
Click to collapse
sorry I don't realize that it was based on this rom ! Fantastic , thanks!
Nice! The original Pure Nexus cured my flash addiction because it's such a great ROM - now the addiction is back.
Will definitely try this one. Thanks for building this!
Has this been updated with the latest inclusions? or is it based on the 17/08 release? Thanks
What are the benefits of building with Uber toolchain?
I'm also curious if the latest layers commits were included here or not.
hi,
I was on MinimalOS, dnlded zip from OP.
Booted in TWRP latest
Factory Reset, Wipe cache, Dalvik
loaded Rom ZIp
flashed
on log it was written - chking MD5 - no MD5 found (I have tried 3 times and all the time I see - Checking for MD5 no MD5 found)
and thereafter, it jz dosent finish.
I waited for 15 min and then rebooted ph into bootloader and then again to TWRP. But this time with red text E: Unable to mount System.
I am not able flash any rom neither able to boot.
can any one help me?
I have solved this by below method.
EDIT: Go to wipe select partition one by 1
Select System - Click Change or Repair partition
Select Data - Click Change or Repair partition (Will Wipe all of ur N5 SD Card)
Select any Rom Zip (just rom zip, flash gapps after 1st successful boot). Your N5 partitions are ready.
any link of gapps?
sandy7874 said:
hi,
I was on MinimalOS, dnlded zip from OP.
Booted in TWRP latest
Factory Reset, Wipe cache, Dalvik
loaded Rom ZIp
flashed
on log it was written - chking MD5 - no MD5 found (I have tried 3 times and all the time I see - Checking for MD5 no MD5 found)
and thereafter, it jz dosent finish.
I waited for 15 min and then rebooted ph into bootloader and then again to TWRP. But this time with red text E: Unable to mount System.
I am not able flash any rom neither able to boot.
can any one help me?
I have solved this by below method.
EDIT: Go to wipe select partition one by 1
Select System - Click Change or Repair partition
Select Data - Click Change or Repair partition (Will Wipe all of ur N5 SD Card)
Select any Rom Zip (just rom zip, flash gapps after 1st successful boot). Your N5 partitions are ready.
Click to expand...
Click to collapse
The same happend here.
But I rebooted into TWRP, did a factory reset, wiped manually cache, dalvik cache, system and data....unmounted system...and restored my nandroid.
No losses of data from sd card
I hope that it will be fixed soon
Konsumhaus said:
The same happend here.
But I rebooted into TWRP, did a factory reset, wiped manually cache, dalvik cache, system and data....unmounted system...and restored my nandroid.
No losses of data from sd card
I hope that it will be fixed soon
Click to expand...
Click to collapse
Even I did no loose anything as I did not wiped Data. I was about to do that but thought of giving a shot at Repairing through TWRP.
Just pushed new build of Pure Nexus. Today i included first specific feature to this ROM which are switches for wifi, bluetooth and data in settings.
Enjoy!
Shiesh1 said:
Has this been updated with the latest inclusions? or is it based on the 17/08 release? Thanks
Click to expand...
Click to collapse
Latest sources up to 25 August.
FooBazza said:
What are the benefits of building with Uber toolchain?
Click to expand...
Click to collapse
Commit i used to build this ROM which is main boost
http://forum.xda-developers.com/showthread.php?t=2754997
RoyJ said:
I'm also curious if the latest layers commits were included here or not.
Click to expand...
Click to collapse
All is up to date with Pure Nexus.
sandy7874 said:
hi,
I was on MinimalOS, dnlded zip from OP.
Booted in TWRP latest
Factory Reset, Wipe cache, Dalvik
loaded Rom ZIp
flashed
on log it was written - chking MD5 - no MD5 found (I have tried 3 times and all the time I see - Checking for MD5 no MD5 found)
and thereafter, it jz dosent finish.
I waited for 15 min and then rebooted ph into bootloader and then again to TWRP. But this time with red text E: Unable to mount System.
I am not able flash any rom neither able to boot.
can any one help me?
I have solved this by below method.
EDIT: Go to wipe select partition one by 1
Select System - Click Change or Repair partition
Select Data - Click Change or Repair partition (Will Wipe all of ur N5 SD Card)
Select any Rom Zip (just rom zip, flash gapps after 1st successful boot). Your N5 partitions are ready.
Click to expand...
Click to collapse
I'm really sorry for this problem. but i think it's not connected with this specific ROM, rather random error.
wana7262 said:
any link of gapps?
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=24052804347782348
Has anyone tried xposed yet with this rom? I know on some roms built with uber it will bootloop, while with others, like chroma, it works
Sent from my Nexus 5
sandy7874 said:
hi,
I was on MinimalOS, dnlded zip from OP.
Booted in TWRP latest
Factory Reset, Wipe cache, Dalvik
loaded Rom ZIp
flashed
on log it was written - chking MD5 - no MD5 found (I have tried 3 times and all the time I see - Checking for MD5 no MD5 found)
and thereafter, it jz dosent finish.
I waited for 15 min and then rebooted ph into bootloader and then again to TWRP. But this time with red text E: Unable to mount System.
I am not able flash any rom neither able to boot.
can any one help me?
I have solved this by below method.
EDIT: Go to wipe select partition one by 1
Select System - Click Change or Repair partition
Select Data - Click Change or Repair partition (Will Wipe all of ur N5 SD Card)
Select any Rom Zip (just rom zip, flash gapps after 1st successful boot). Your N5 partitions are ready.
Click to expand...
Click to collapse
I had same problem, so maybe it is not a random error.
mastero9017 said:
Highly recommended kernel:
Blu_Spark built with UBERTC 4.9.4 and few more optimization flags
Click!
Click to expand...
Click to collapse
r16 is out now.
Edit: Just downloaded today's build but it doesn't seem to flash, just like the others reported. It's stuck at "Skipping MD5 check: no MD5 file found..." forever but then finally moves on after about 10 minutes.
Hi mates. I've gotten a problem on flashing any AOSP based roms. Any time I try to flash these roms I will get this error shown in the screenshot attached. I had this error with Haxynos 5.1.1 rom and aokp.
No answer?
C'mon there must be a way guys. I really need this.
Why were you trying to install an older build over the newer one? That is the source of the error I think.
Jericho Arcelao said:
Why were you trying to install an older build over the newer one? That is the source of the error I think.
Click to expand...
Click to collapse
I installed haxynos marshmallow build a month ago. And I always clean flash everything except internal storage before a rom flashing so there shouldn't be any problem with that. The error it give me is cause of an unknown file from flashing that marshmallow rom that I flashed before as I think. So maybe an address to delete that file can help me. And downgrading is something normal in rom flashing. There shouldn't be any error with it. I always can downgrade Cyanogenmod based roms. It is a matter for me to be able to downgrade. But I can't format my internal storage. and I can't boot that marshmallow rom from haxynos even!?!
Have u wiped ur system before installing?
---------- Post added at 09:40 AM ---------- Previous post was at 09:40 AM ----------
Tell me fast
JohnSmit268 said:
Hi mates. I've gotten a problem on flashing any AOSP based roms. Any time I try to flash these roms I will get this error shown in the screenshot attached. I had this error with Haxynos 5.1.1 rom and aokp.
Click to expand...
Click to collapse
wipe data system dev & cache then try agian this will work :good:
I always clean internal storage before doing any flashes. There is still app cache left even if you do a factory reset, resulting in data incompatible with other ROMs. Those caches might be those files you were talking about. And that is also why I have an extsdcard to store my rom stuff
AdvaitT17 said:
Have u wiped ur system before installing?
---------- Post added at 09:40 AM ---------- Previous post was at 09:40 AM ----------
Tell me fast
Click to expand...
Click to collapse
Yes of course I did. Plz look at that screenshot!!! I posted it for you guys.
Jericho Arcelao said:
I always clean internal storage before doing any flashes. There is still app cache left even if you do a factory reset, resulting in data incompatible with other ROMs. Those caches might be those files you were talking about. And that is also why I have an extsdcard to store my rom stuff
Click to expand...
Click to collapse
App cache can be deleted in recovery by wiping cache and I know where app caches are stored. I always delete them. And anyway no app cache can make a rom not to get flashed like this!!!
ibra993 said:
wipe data system dev & cache then try agian this will work :good:
Click to expand...
Click to collapse
As I said I always clean flash. Means wiping these things you said.
Anyway c'mon guys, you didn't even look at the screenshot, I wiped these as shown in that screenshot
JohnSmit268 said:
App cache can be deleted in recovery by wiping cache and I know where app caches are stored. I always delete them. And anyway no app cache can make a rom not to get flashed like this!!!
Click to expand...
Click to collapse
Its weird it happens to me. Like when I install FB and I clean data but not internal there's a folder named com.facebook.katana or something like that still staying there. And there's cache inside. Anyway I remember now that my flash back then was ok even though it was only a ROM migration and not a migration of android version. Just try wiping internal for once. It might just help
Im also got this error while flashing aokp rom
AdvaitT17 said:
Im also got this error while flashing aokp rom
Click to expand...
Click to collapse
I'm also getting it on flashing Haxynos 5.1.1
[SOLVED] Solved it myself. Thank you all.
Hi guys. I solved it myself. I remembered that I used to edit the apps that gapps zip files remove from my ROM by editing this file: META-INF>>com>>google>>Android>>updater-script
So I opened my aokp ROM zip and opened that file and see this line in the top of the script:
(!less_than_int(1413593113, getprop("ro.build.date.utc"))) || abort("Can't install this package (Sat Oct 18 02:45:13 CEST 2014) over newer build (" + getprop("ro.build.date") + ").");
that will request the build date and match it with the ROM and if the build date was newer it won't flash the ROM. So I edited the updater-script and removed this lines from it and save the zip and voila! It get flashed and booted. Anyway I think putting this line to the updater-script is a cruel action. Maybe somebody have problems with the current ROM and wanna revert!!
JohnSmit268 said:
Hi guys. I solved it myself. I remembered that I used to edit the apps that gapps zip files remove from my ROM by editing this file: META-INF>>com>>google>>Android>>updater-script
So I opened my aokp ROM zip and opened that file and see this line in the top of the script:
(!less_than_int(1413593113, getprop("ro.build.date.utc"))) || abort("Can't install this package (Sat Oct 18 02:45:13 CEST 2014) over newer build (" + getprop("ro.build.date") + ").");
that will request the build date and match it with the ROM and if the build date was newer it won't flash the ROM. So I edited the updater-script and removed this lines from it and save the zip and voila! It get flashed and booted. Anyway I think putting this line to the updater-script is a cruel action. Maybe somebody have problems with the current ROM and wanna revert!!
Click to expand...
Click to collapse
So it was just with the updater-script. Well good for you
Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Installation steps
- Make sure you have twrp 3.x installed
- Make sure your phone is charged to at least 60%
- Download the ROM, and transfer to your phone / external SD card if you have encryption active
- Make sure OEM Unlock is on in developer settings
- Boot the phone into TWRP
- Do a FULL wipe: Dalvik Cache, Cache, Data, System
- Flash rom and boot (first boot may take 15-20 min)
- If you face any lags/hangs at first boot, reboot 2-3 times and it will be fixed
- If you want you can flash Magisc 17.3 to root your phone
Press thanks if you like the rom
Harry
ROM OS Version: 8.x Oreo
Based On: STOCK ROM
Version Information
Status: Stable
Created 31-11-2018
There is nothing changed from stock rom.
Apps, battery and performance is great.no lags/hangs !
Samsung health works fine!
Download link here
Whar are the customisations in this ROM? Can you provide some screenshots?
What's the difference between stock rom and yours?
nebkas said:
Whar are the customisations in this ROM? Can you provide some screenshots?
Click to expand...
Click to collapse
nothing is customised. I uploaded some screenshots.
francuz1988 said:
What's the difference between stock rom and yours?
Click to expand...
Click to collapse
nothing actually.
what about security patch?
cvhfghfghfgh said:
what about security patch?
Click to expand...
Click to collapse
Security patch is 1 july
ariber14
Great job .Thanks.
Will you deodex it in the future?
ariber14 said:
Security patch is 1 july
Click to expand...
Click to collapse
have you try any modification to your system files? or delete/debloat some apps?
"verity flag" triggerred to me when modification or deleting/debloat some apps
no-verity zip did nothing... (fstab not found in unpacked boot.img. this fstab might located in vendor partition)
Bubibubibibi said:
ariber14
Great job .Thanks.
Will you deodex it in the future?
Click to expand...
Click to collapse
I believe it's already deodexed
an-_-dro said:
have you try any modification to your system files? or delete/debloat some apps?
"verity flag" triggerred to me when modification or deleting/debloat some apps
no-verity zip did nothing... (fstab not found in unpacked boot.img. this fstab might located in vendor partition)
Click to expand...
Click to collapse
As i said above i changed nothing. But i'm not familiar with the fstab.if you tell me how to do it i can try and rebuilt it with the vendor folder and maybe make the changes nessesary for this
ariber14 said:
As i said above i changed nothing. But i'm not familiar with the fstab.if you tell me how to do it i can try and rebuilt it with the vendor folder and maybe make the changes nessesary for this
Click to expand...
Click to collapse
in my case, after i delete even only one app (with file manager romtoolbox) then restart. all become messed up.. message FC, romtoolbox file manager unable to copy/delete anymore, magisk become FC when try to download madule. i have to restore my backup up to fix this.
i just curious if this just happen to me or not. try delete any app that you consider bloatware, then restart and see if u have the same symptoms
definitely i need (we need) custom kernel with removed all protections (RMM, knox related, dm verity etc.) if we want fully modded stock rom..
an-_-dro said:
in my case, after i delete even only one app (with file manager romtoolbox) then restart. all become messed up.. message FC, romtoolbox file manager unable to copy/delete anymore, magisk become FC when try to download madule. i have to restore my backup up to fix this.
i just curious if this just happen to me or not. try delete any app that you consider bloatware, then restart and see if u have the same symptoms
definitely i need (we need) custom kernel with removed all protections (RMM, knox related, dm verity etc.) if we want fully modded stock rom..
Click to expand...
Click to collapse
I deleted about 8 apps and everything works good. do you have root with magisc 17.3?
You can try this boot.img. flash it as image from twrp
Download Here
ariber14 said:
I deleted about 8 apps and everything works good. do you have root with magisc 17.3?
You can try this boot.img. flash it as image from twrp
Download Here
Click to expand...
Click to collapse
i flashed 17.1 i gez..but will try your boot.img first.
thanks
**what actually on that boot.img change?
an-_-dro said:
i flashed 17.1 i gez..but will try your boot.img first.
thanks
**what actually on that boot.img change?
Click to expand...
Click to collapse
This is the boot.img i use.i had no problems. try it, and maybe you need to flash magics again. but tell me how it is
ariber14 said:
This is the boot.img i use.i had no problems. try it, and maybe you need to flash magics again. but tell me how it is
Click to expand...
Click to collapse
but wait, your model is FN and mine is G/DS. do u think that will cause some trouble?
when this error things done, i have so many plan with it... maybe later i'll upload deodexed version. for your base to make custom rom..
an-_-dro said:
but wait, your model is FN and mine is G/DS. do u think that will cause some trouble?
when this error things done, i have so many plan with it... maybe later i'll upload deodexed version. for your base to make custom rom..
Click to expand...
Click to collapse
I don't know if it will work but either way you can make your own patched boot img.just keep a backup of the bot.img you are using now and you can try the patched ones
ariber14 said:
I don't know if it will work but either way you can make your own patched boot img.just keep a backup of the bot.img you are using now and you can try the patched ones
Click to expand...
Click to collapse
still same.. after debloating, become crash on certain application..
maybe i need custom kernel
an-_-dro said:
still same.. after debloating, become crash on certain application..
maybe i need custom kernel
Click to expand...
Click to collapse
What model you have ? A605FN or A605G/DS ?
Maybe i can help you to make a stock file with TWRP included ..
balanadi said:
What model you have ? A605FN or A605G/DS ?
Maybe i can help you to make a stock file with TWRP included ..
Click to expand...
Click to collapse
my model is G/DS.
thanks but i got my phone deodexed already (rooted of course since TWRP by ashyx). but until now i barely can not modifying anything... replacing and deleting file make my phone unstable (already talked about this in your thread).
for your information..unstable or crash of my phone its not because i deleted some app and their dependencies.. even replacing god damn xml file triggering that weird thing :silly:
Hi all, so I flashed Magisk 19.3 on my Lenovo P2, but after that I have been unable to get WiFi to work. I have tried:
* Flashing magisk uninstall zip
* Uninstall magisk from within magisk manager
* reflash original boot.img, TWRP recovery.img and superuser.zip (tried this a lot of times)
* wipe cache/dalvik
* delete /data/misc/wifi/p2p_supplicant.conf as suggested on some forum, also set permissions to 0775 back when i still had that file
Any ideas what can I do to fix my wifi short of flashing/installing everything from scratch?
haishaidua said:
Hi all, so I flashed Magisk 19.3 on my Lenovo P2, but after that I have been unable to get WiFi to work. I have tried:
* Flashing magisk uninstall zip
* Uninstall magisk from within magisk manager
* reflash original boot.img, TWRP recovery.img and superuser.zip (tried this a lot of times)
* wipe cache/dalvik
* delete /data/misc/wifi/p2p_supplicant.conf as suggested on some forum, also set permissions to 0775 back when i still had that file
Any ideas what can I do to fix my wifi short of flashing/installing everything from scratch?
Click to expand...
Click to collapse
You just might have to do that why didn't you have a backup in place threw twrp before you updated your magisk that's the rule of thumb when u do any update that modifies the system have a backup in place for instances like this
([emoji813]9/[emoji725]/9[emoji813])
PoochyX said:
You just might have to do that why didn't you have a backup in place threw twrp before you updated your magisk that's the rule of thumb when u do any update that modifies the system have a backup in place for instances like this
([emoji813]9/[emoji725]/9[emoji813])
Click to expand...
Click to collapse
Yeah kinda forgot that lol, haven't done this in a long time. Hmm so I have an old backup from when I got the phone, which partitions should I try to restore?
haishaidua said:
Yeah kinda forgot that lol, haven't done this in a long time. Hmm so I have an old backup from when I got the phone, which partitions should I try to restore?
Click to expand...
Click to collapse
Boot... System... Data
Those are the 3 you need to restore
([emoji813]9/[emoji725]/9[emoji813])
ok just restoring boot did it for me, dunno how that is different from just reflashing the original but works now anyways. I'll remember to get a full backup next time..