[Experimental][MIUI][ROM][port][8.1.0][arm64][treble] MiRoom 10 [wt88047] - Xiaomi Redmi 2 ROMs, Kernels, Recoveries, & Other

.
This is the port of the port... was based on the port of MiRoom10 for Redmi 3
(As I said before, the port from Redmi 3 to Redmi 2 is easier.)
I hope it's useful.
Mandatory Installation Requirements:
Use Treble Twrp 64bits oem-Cache:
[02/november/2018]:https://www.androidfilehost.com/?fid=11410932744536993167
Resize the system partition to 2GB:
https://forum.xda-developers.com/showthread.php?t=3803042
Download ROM:
[MiRoom 8.11.15 beta 20181219]:
base device: Mi Max 3
https://www.androidfilehost.com/?fid=11410963190603878161
Notes:
first boot in 10 minutes.
the camera is unstable in the first minutes after the boot.
selinux: permissive
Credits :
zignas from 4pda forum by Redmi 3 port from MiRoom 10.
ariafan and @WinKarbik from 4pda forum by redmi 3 treble roms.
@karthik km and @mkfslsxbin from xda forum by Redmi 2 treble source.
I am not responsible for bricked devices or dead SD cards.
Use at your own risk.

reserved

reserved..

Wew
Pru
Finally

Thank you :laugh:

will this work with 1GB version ?

Superraju said:
will this work with 1GB version ?
Click to expand...
Click to collapse
Waiting for the answer

Treble64-Twrp3230-oemCache-wt88047-20181102.img ------very good,The speed of backup system and recovery system is very fast, exceeding twrp3.0.2 (breaking myth)
1. Can you add Chinese language files(zh_CN)?
2. Can you remove reboot_install_app_prompt_install
thank you!

does any one installed this ROM?

shui288 said:
2. Can you remove reboot_install_app_prompt_install
Click to expand...
Click to collapse
the prompt install twrp app? , just unthick it in twrp>settings
---------- Post added at 11:55 PM ---------- Previous post was at 11:49 PM ----------
@Cecell3000, since it is treble rom, we first need treble enabled rom installed right, am I correct?

Stock ringtones, notification sounds and ui sounds aren't working,have to set custom ringtones and notification sounds

mobile data bug
bug:
Mobile data doesn't work.
Thank you.
hope fix it.

Mobile data doesn't work,too:crying:

Device lags on opening closing apps and wakeup.
camera does not start.
data not working.

First thanks for porting this.
UI is smooth and responsive didn't faced lags
some heat is there but that reduces after 3 to 4 min.
some bugs i found..
mobile data doesn't work on 4g, even 2g
VoLTE also not working.
can't take logs due to "DEVICE UNAUTHORIZED" in adb, and no prompt for adb permission.
{cant test headphone because my headphone jack is dead}
hope you can f8x these and give us a nice port...
---------- Post added at 02:32 PM ---------- Previous post was at 02:30 PM ----------
karan68 said:
Device lags on opening closing apps and wakeup.
camera does not start.
data not working.
Click to expand...
Click to collapse
cam working fine here and no lags too...if u wait for 5 min after boot

and nobody believed me 2 years ago when i released initial arm64 kernel sources and said arm64 roms are faster and better _sighs_
anyway cool work!

Does the front-facing camera work?

perfect rom except data and ringtone

abhishek 9650 said:
and nobody believed me 2 years ago when i released initial arm64 kernel sources and said arm64 roms are faster and better _sighs_
anyway cool work!
Click to expand...
Click to collapse
I believe in you bro....
64bit is faster...
Because it support more instruction set ofc...

There is a error during installation in 1GB/8GB model.
Code:
E1001: Failed to update system image.
[COLOR="Red"]Updater process ended with ERROR: 7[/COLOR]
Expanded system to 2GB.
Edit: Lineage 64bit version installs just fine though

Related

[6.0.1][CM13][J500FN] UNOFFICIAL CyanogenMod13 Port to j500fn, [Alpha] testing needed

ok folks, ive been working on this for a good while now and finally got it to boot and work mostly
i am happy to announce my version of CM13, this is based on the j500f port by zonik but has had a fair number of changes to make it work on the j500fn
i need to make people aware NOT TO CHANGE the kernel built in to this rom as it WILL stop the device booting the os if you do
changelog from the original cm13 port to this version
Code:
fixed audio through speaker etc
disabled multisim support
built a complete custom j500fn kernel based on my 6.0.1 kernel source for the j500f, highly untested kernel but seems to be working ok and have all the features expected of my kernels built in
this build seems to be at least stable and very frugal on battery life (lost 1% overnight)
things that dont work that i have noticed so far
Code:
Vibration
hardware touch keys(back and app switch) -enable onscreen nav bar
camera
MTP (should be fixed when i rebuild the kernel)
any other things i have not yet tested so please advise any issue.
highly recommend backing up device before flashing this and a wipe will be required
thanks folks and enjoy
Very well. Great job. Congratulations.
I will flash, later i tell you how is it
Enviado desde mi SM-J500FN mediante Tapatalk
---------- Post added at 01:43 PM ---------- Previous post was at 12:58 PM ----------
I flash the rom doing a clean installl and it doesn´t adavance from the boot logo
---------- Post added at 02:18 PM ---------- Previous post was at 01:43 PM ----------
I try again and it doesn´t pass from the boot logo D:
DJ_Steve said:
ok folks, ive been working on this for a good while now and finally got it to boot and work mostly
i am happy to announce my version of CM13, this is based on the j500f port by zonik but has had a fair number of changes to make it work on the j500fn
i need to make people aware NOT TO CHANGE the kernel built in to this rom as it WILL stop the device booting the os if you do
changelog from the original cm13 port to this version
Code:
fixed audio through speaker etc
disabled multisim support
built a complete custom j500fn kernel based on my 6.0.1 kernel source for the j500f, highly untested kernel but seems to be working ok and have all the features expected of my kernels built in
this build seems to be at least stable and very frugal on battery life (lost 1% overnight)
things that dont work that i have noticed so far
Code:
Vibration
hardware touch keys(back and app switch) -enable onscreen nav bar
camera
MTP (should be fixed when i rebuild the kernel)
any other things i have not yet tested so please advise any issue.
download :
highly recommend backing up device before flashing this and a wipe will be required
thanks folks and enjoy
Click to expand...
Click to collapse
Please fix the download link
Download Link works but there is too much traffic on it.
chello83 said:
Download Link works but there is too much traffic on it.
Click to expand...
Click to collapse
When you get this message it means that the link will be banned for 24 to 72 hours. So no, it doesen't work
erik96joe said:
When you get this message it means that the link will be banned for 24 to 72 hours. So no, it doesen't work
Click to expand...
Click to collapse
Is it really this long time banned? I wanted to try it too... cant await mm on j5fn
ill reupload the link later or tomorrow as i have few fixes i want to do first
pacower said:
I will flash, later i tell you how is it
Enviado desde mi SM-J500FN mediante Tapatalk
---------- Post added at 01:43 PM ---------- Previous post was at 12:58 PM ----------
I flash the rom doing a clean installl and it doesn´t adavance from the boot logo
---------- Post added at 02:18 PM ---------- Previous post was at 01:43 PM ----------
I try again and it doesn´t pass from the boot logo D:
Click to expand...
Click to collapse
ok thanks i will check
DJ_Steve said:
ok thanks i will check
Click to expand...
Click to collapse
on my F dualsim MM the rom booted with your FN boot.img but no wifi and network
the same booted with F cm13 bootimg but no wifi and network
Woooow, can't wait for iiit :victory::victory:
@DJ_Steve OMG I LOVE YOU!!!!!!!!!!!!!!! (not gay)
but the link for the download still does not work ...???
Why don't use MEGA instead Dropbox? Doesn't suspend The link for too much trafic, and the server is faster
Enviado desde mi SM-J500FN mediante Tapatalk
kique119 said:
Why don't use MEGA instead Dropbox? Doesn't suspend The link for too much trafic, and the server is faster
Enviado desde mi SM-J500FN mediante Tapatalk
Click to expand...
Click to collapse
Because megas junk and why when i have my own server for whennthings like this happen. I need to fix incall audio before i reupload it to their
Sent from my SM-J500FN using Tapatalk
DJ_Steve said:
Because megas junk and why when i have my own server for whennthings like this happen. I need to fix incall audio before i reupload it to their
Sent from my SM-J500FN using Tapatalk
Click to expand...
Click to collapse
new link has been put up - still has audio issue present at this time as i will not have the time in next few days to look at it so uploading it as is
Can i use Gapps?
I'm downloading and I try just ten minutes and I'll know
paulo boë said:
Can i use Gapps?
Click to expand...
Click to collapse
gapps are already in the rom
There are bugs in the rom ? Xposed which we can mount ? grazir still excellent work.. DJ_Steve

[ROM][Developer] MIUI 10 xiaomi.eu links

8.11.29
https://sourceforge.net/projects/xi....eu_multi_MIPAD4_8.11.29_v10-8.1.zip/download
https://androidfilehost.com/?fid=11410963190603862829
8.11.22
https://sourceforge.net/projects/xi....eu_multi_MIPAD4_8.11.22_v10-8.1.zip/download
https://androidfilehost.com/?fid=11410963190603856241
8.11.15
https://sourceforge.net/projects/xi....eu_multi_MIPAD4_8.11.15_v10-8.1.zip/download
https://androidfilehost.com/?fid=11410963190603847475
8.11.8
https://sourceforge.net/projects/xi...i.eu_multi_MIPAD4_8.11.8_v10-8.1.zip/download
https://androidfilehost.com/?fid=11410963190603842781
8.11.1
https://sourceforge.net/projects/xi...i.eu_multi_MIPAD4_8.11.1_v10-8.1.zip/download
https://androidfilehost.com/?fid=11410932744536993347
New links will be posted here.
Why is it not on the device list, but on the download things..
Also I read in another thread, that it will be supported when the final MIUI lands on the pad4. So it is great to see, that it is here already.. Now I need to unlock my BL
And from where do I get the TWRP file?
We got Xiaomi.eu support? That's amazing!
Amazing, full driver support direct from XIaomi, with GPlay and multilenguage 10/10
Great.. Why is the unlock process 720hours = 30 days.. What is wrong with Xiaomi?!? The Tab3 was also supported from XIaomi.eu.. But only small releases.. Lets hope for better with the Pad4.
Found TWRP file which is "maintained" by MIUI.it: https://androidfilehost.com/?fid=1322778262903992312
Very Good!
It's working very well. I've installed it around 2h ago.
Are there directions to help a relatively newbie install this? I've recently purchased a Mi Pad - and it has an unofficial ROM and I'm hoping to flash this one. The device came unlocked already.
First, I followed this link to flash TWRP: stuffcompare.com/blog/807/How-to-flash-TWRP-recovery-in-Mi-Pad4. But I'm not sure that's actually successful. I'm not sure how to boot into TWRP...
Any help would be very, very much appreciated. Thanks.
Power off your tab.
Press and hold volume up + power buttons untill You see MI logo.
After a while TWRP should boot
Installation Instructions: Mipad 4 Wifi & Mipad 4 LTE
• - Make sure your bootloader is unlocked!
Link Tool TWRP: https://drive.google.com/file/d/1llIKGJ8iSlu1_aNCacJOWaWNiOEA9BTO/view
• - Boot to fastboot mode
• - Run twrp-installer.exe in folder , tool automatic boot in TWRP
- Wipe/ Format data and Reboot in to Recovery TWRP again
- Mount all the possible partitions
- Wipe your data,cache,Internal storage,dalvik DONT WIPE SYSTEM OR YOU WILL BRICK YOUR DEVICE
- Using MTP or OTG copy the xiaomi.eu rom to your device
- Flash the xiaomi.eu_multi_MIPAD4_8.9.6_v10-8.1 rom
- Wipe cache and dalvik
- Reboot
Thank you for everything. Could someone please explain to me how to remove the 720 hours of unnecessary waiting? in advance thank you
lidl11 said:
Thank you for everything. Could someone please explain to me how to remove the 720 hours of unnecessary waiting? in advance thank you
Click to expand...
Click to collapse
someone wrote about swapping two different Mi Accounts but... probably they already fixed it, it was not working for me a couple of hours ago.
I'm afraid we have to wait for one month.
which is totally crazy, IMHO.
Flashed but still little buggy for my taste (like the Power app crash sometimes installing apks, same bug on miui.it rom); China is more stable. is for daily use? Probably yes but have some troubles with games like PUBG
How to root this rom using twrp ?
pieriv59 said:
How to root this rom using twrp ?
Click to expand...
Click to collapse
Install Magisk in TWRP
snke said:
Flashed but still little buggy for my taste (like the Power app crash sometimes installing apks, same bug on miui.it rom); China is more stable. is for daily use? Probably yes but have some troubles with games like PUBG
Click to expand...
Click to collapse
Can you describe the troubles you are having with games like PUBG? What specific troubles?
https://androidfilehost.com/?fid=1322778262904000600 (8 Sep, reuploaded version)
wintermute000 said:
Can you describe the troubles you are having with games like PUBG? What specific troubles?
Click to expand...
Click to collapse
After you died in a game, PUBG remains locked in the death cam and doesn't quit automatically to the lobby. So you need to press back button to force the exit menu to appear
---------- Post added at 12:52 PM ---------- Previous post was at 12:52 PM ----------
Camerado said:
https://androidfilehost.com/?fid=1322778262904000600 (8 Sep, reuploaded version)
Click to expand...
Click to collapse
Same rom, same bugs
wintermute000 said:
Can you describe the troubles you are having with games like PUBG? What specific troubles?
Click to expand...
Click to collapse
Ok, i'm wrong...it's a WiFi problem. No stable connection with 2.4 band, that's the problem
Sent from my MI PAD 4 using XDA Labs
Thanks for your TWRP link and your instruction. Unfortunatelly, I have to wait for 720h before unlocking and flashing any ROM !

Syriana_Pie By Maher treble android pie 9

SYRIANA_PIE ANDROID 9.0​
WHAT IS SYRIANA_PIE?
it`s asop based on phh_treble_arm64_ab v104 including Gapps, Magisk 17.1 and all the fixes to get treble android pie more stable , tweaked ,moded,clean and mix asop without any extras
Download link:​
Syriana_Pie V1.0​
Notice1:
Dont use Developer settings - then MTP will be buggy.
to get Enhanced 4G LTE Mode install ims.apk (( should fix VOLTE as well "not tested cuz my sims not soppurted" ))
INSTALLATION
required :
1- unlocked bootloader
2- ADB and fastboot
3- enable usb debugging in developer settings.
4- clean flash (( formate data))
5- use those commands
Code:
adb shell
Code:
reboot bootloader
now we flash it
Code:
fastboot flash system Syriana_pie_v1.0.img
then
Code:
fastboot reboot
What Is Working In Syriana_Pie ?
everthing working as a charm except hotspot (still working on it )
this rom tested on Nokia6.1 Nokia8 Nokia7plus and Upro
working on A/B devices only
Changelog
Code:
-fixed MTP
-Fixed NFC
-fixed gcam and stock pie cam
-fixed dark mode
-Adaptive brightness and Ambient display
-magisk v17.1 with latest version of magisk manager
-Pixel launcher and Quick step Launcher with swip up on home button gesture
-tweaked for better internet speed,performance,gaming,and battery life
-updated all gapps
-and alot more
- 100%Stable for daily use.
Special Thanks goes to:
phhusson for his great job and Open Source Code
Contributors
Maherabed1986
ROM OS Version: 9.x Pie
ROM Kernel: Linux4.4
Based On: AOSP
Version Information
Status: Stable and very smooth
Created 2018-09-17
:good:
Screen Shots
Great job dev! So good to see at least a stable pie gsi.
Btw i had few questions, first is native video calling from dialer working ? Next any heating or excessive heating issues? Will there be furthur future updates?
raza_maestro said:
Great job dev! So good to see at least a stable pie gsi.
Btw i had few questions, first is native video calling from dialer working ? Next any heating or excessive heating issues? Will there be furthur future updates?
Click to expand...
Click to collapse
No heating issue nativ vedio calling there but I didn't test it
Maherabed1986 said:
No heating issue nativ vedio calling there but I didn't test it
Click to expand...
Click to collapse
Nice. What about future updates? Will you be actively making it better?
raza_maestro said:
Nice. What about future updates? Will you be actively making it better?
Click to expand...
Click to collapse
Sure I'll do my best I wanna collect the user feedback then I'll improve it to make sure all satisfied with this rom
Maherabed1986 said:
Sure I'll do my best I wanna collect the user feedback then I'll improve it to make sure all satisfied with this rom
Click to expand...
Click to collapse
Good to hear that buddy. Thanks again for the rom.
raza_maestro said:
Good to hear that buddy. Thanks again for the rom.
Click to expand...
Click to collapse
You're most welcome my friend
Great job. Thxi i have als somet questions. How about battery life? This rom is for al TA..... versions . And The camera is not laggy?.
EricH7001 said:
Great job. Thxi i have als somet questions. How about battery life? This rom is for al TA..... versions . And The camera is not laggy?.
Click to expand...
Click to collapse
It worth a try everything working no lag no issues so I need your feedback to improve it more and more
Battery life for me much better than Oreo camera not laggy
Amazing ! Very thanks for share, I will test when will have free time to configure all.
FM radio working?!?
Magister54 said:
FM radio working?!?
Click to expand...
Click to collapse
No sir it's not important for me
Please, someone that have installed this rom tell how is going. A little review. :highfive:
What about USB tethering for using the internet on a laptop?
cmaxwe said:
What about USB tethering for using the internet on a laptop?
Click to expand...
Click to collapse
Working
Flashing on my TA-1016 (fingers crossed!)
---------- Post added at 12:37 PM ---------- Previous post was at 12:21 PM ----------
cmaxwe said:
Flashing on my TA-1016 (fingers crossed!)
Click to expand...
Click to collapse
Doesn't recognize my SIM since my phone is a single SIM variant.
Any ideas?
Is this just something in the build.prop?
---------- Post added at 01:32 PM ---------- Previous post was at 12:37 PM ----------
cmaxwe said:
Flashing on my TA-1016 (fingers crossed!)
---------- Post added at 12:37 PM ---------- Previous post was at 12:21 PM ----------
Doesn't recognize my SIM since my phone is a single SIM variant.
Any ideas?
Is this just something in the build.prop?
Click to expand...
Click to collapse
Hmm... I am in a bit of a position now.
Can't figure out how to get it to recognize my SIM and if I switch back to my "current-slot" = "b" my phone isn't booting past the Nokia screen.
Might have just effectively made my phone a wifi-only device... :-/
My IMEI is correct for the SIM 1 slot. So that is good news probably....
cmaxwe said:
Flashing on my TA-1016 (fingers crossed!)
---------- Post added at 12:37 PM ---------- Previous post was at 12:21 PM ----------
Doesn't recognize my SIM since my phone is a single SIM variant.
Any ideas?
Is this just something in the build.prop?
---------- Post added at 01:32 PM ---------- Previous post was at 12:37 PM ----------
Hmm... I am in a bit of a position now.
Can't figure out how to get it to recognize my SIM and if I switch back to my "current-slot" = "b" my phone isn't booting past the Nokia screen.
Might have just effectively made my phone a wifi-only device... :-/
My IMEI is correct for the SIM 1 slot. So that is good news probably....
Click to expand...
Click to collapse
Could you solve that ?
neodante said:
Could you solve that ?
Click to expand...
Click to collapse
Not yet.
I moved my SIM over to another phone for now.
Downloading the World Wide firmware and am going to try to flash that to my TA-1016.
With any luck that will get me back to stock and working SIM.

[Magisk][Module][MI A2 Stock Camera][Update-11/9/18][Test]

[Magisk]MIUI stock camera for all Custom roms.
-Initial Port test 4
-Test it and let me know if it works or not
Download-
Lockscreen does not show up after installing through recovery
Running havoc os + magisk 17.3
Broke my rom
Will attach a logcat if possible
ash97 said:
Lockscreen does not show up after installing through recovery
Running havoc os + magisk 17.3
Broke my rom
Will attach a logcat if possible
Click to expand...
Click to collapse
I dont have poco f1 ... i need some testers to test those ports
ash97 said:
Lockscreen does not show up after installing through recovery
Running havoc os + magisk 17.3
Broke my rom
Will attach a logcat if possible
Click to expand...
Click to collapse
Please try https://drive.google.com/file/d/14n0RjAxRgy260BQTA6LjTulIhsnloNU1/view?usp=sharing that one
Sure I'll test that
---------- Post added at 04:01 PM ---------- Previous post was at 03:52 PM ----------
ARNOB XENON said:
Please try https://drive.google.com/file/d/14n0RjAxRgy260BQTA6LjTulIhsnloNU1/view?usp=sharing that one
Click to expand...
Click to collapse
That too didn't work
Took 3 minutes to boot + System UI fc
I am running pie... Could that be a problem?
ash97 said:
Sure I'll test that
---------- Post added at 04:01 PM ---------- Previous post was at 03:52 PM ----------
That too didn't work
Took 3 minutes to boot + System UI fc
I am running pie... Could that be a problem?
Click to expand...
Click to collapse
No .... I am uploading the 3rd port wait 5 min
ash97 said:
Sure I'll test that
---------- Post added at 04:01 PM ---------- Previous post was at 03:52 PM ----------
That too didn't work
Took 3 minutes to boot + System UI fc
I am running pie... Could that be a problem?
Click to expand...
Click to collapse
here you go https://drive.google.com/file/d/1z-w_mPMxIjCxKOWhysh0Ty4B8Iw631HW/view?usp=sharing
ARNOB XENON said:
here you go https://drive.google.com/file/d/1z-w_mPMxIjCxKOWhysh0Ty4B8Iw631HW/view?usp=sharing
Click to expand...
Click to collapse
Still the same problem
ash97 said:
Still the same problem
Click to expand...
Click to collapse
Does it boots??
ARNOB XENON said:
Does it boots??
Click to expand...
Click to collapse
Boots but nothing appears on screen ... System ui crashes
ash97 said:
Boots but nothing appears on screen ... System ui crashes
Click to expand...
Click to collapse
Wait I am uploading new one
Try that one https://drive.google.com/file/d/1O6egjRJDF6kDzo7QGRKGRKoBKn2_Ut8k/view?usp=sharing
System ui fc after boot...
ash97 said:
System ui fc after boot...
Click to expand...
Click to collapse
Thanks for your test... I think it will take more time ...
ARNOB XENON said:
Thanks for your test... I think it will take more time ...
Click to expand...
Click to collapse
Which device you have
peer mohd said:
Which device you have
Click to expand...
Click to collapse
mi a2 and note 5 pro
is it supposed to be better than the stock app? i th8nk there's a module on magisk downloads section but i never tried it.
Hello Guys,
I'm just coping some of the instructions i gave to two testers ( @AEonAX @Jaskirat singh ) in PM. if someone else want to be part of this it'll be helpful post
I'm sending you lot of camera mods to check, some are specific for POCO other are for other device.
What you need to do is to check each and every one of them and see if any of them are working (partially or fully) if not at what step they are breaking (Bootlooop , Random reboot or Force-close)
If any of them work even partially we'll get fully working mod soon. if not than we need to wait for long time.
Ignore all other bugs that may occur after flashing these mod, just focus on if camera is working or not. (Fingerprint may not work, Bluetooth FC all these gets resolved as soon as you uninstall Magisk Module of camera mod so Don't worry)
Personally i tried poco specific mod and they didn't work for me but i want you to give them a shot as well.
Do maintain the list i asked (working full/partial & breaking point ) and send me the same after you are done with all of them.
Let's see if we are lucky or not by checking if any of them works for you !
https://drive.google.com/drive/folders/1uEyVnUzo2MuBoGWg23cxIyhcidZboxl0
https://drive.google.com/file/d/1Rdncjqb022P5Wk2BJcARPRnh2TlGRemU/view
https://forum.xda-developers.com/mi-a2/themes/magisk-t3847779
https://forum.xda-developers.com/re...gisk-mi-a2-ported-camera-custom-roms-t3822082
https://forum.xda-developers.com/re...miui-stock-camera-portrait-mode-dual-t3816069
In case you get boot-loops (HIGH Chances) this will help (use V4)
https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242
From tomorrow my daily routine starts, so i won't be able to guide or help you
So if both of you guys want to collaborate on other platform (FB, Telegram etc ) do it yourself and let me know.
Happy Testing & Help @ARNOB XENON to port this amazing mod for us !!
One more thing,
All the mods are Magisk modules so you won't get into too much trouble but keeping Nandroid backup from TWRP before starting is always advisable
dont know what so special in MI A2 CAMERA
that porting its camera to poco f1 .
i appriciate ur work but i am talking about sense .
what the use .
is mi A2 camera is better than poco f1 ?
i dont think so...
or any extra feature is there that we r not getting in poco f1 ..
The port is for those who are on custom roms. You can still get the stock miui camera through this port even if you are on a custom rom.
Is slow motion upto 240fps working ?

Android Q Developer Preview GSI for treblized device with 8.1 or P vendor is out

Android Q Developer Preview GSI for treblized device with 8.1 or P vendor is out and probably work on our LeEco Le Max 2
link : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
flash "qfixes.zip" as the last step if Q can't boot with AEX vendor !
or you can use Nitrogen pie OS Vendor , it would be fine
-------------------------------------------------------------------------------------------------------------------------------------------
another way here , you can try this , by following this video , you should have the latest AEX pie System first , it will boot successfully
https://www.youtube.com/watch?v=AIqGMon75cE
all the files you need are here
https://zhihe.in/Project Treble GSI/Android Q v0.2(包含修复包和gapps)/
At the moment seems like is not working on our device (reboot to Fastboot)
Edit: Worknig with Nitrogen OS pie vendor, as stated on the OP post.
Edit2: To fix the storage issue, just "adb shell sm set-isolated-storage off" to make it work.
pssyz said:
Android Q Developer Preview GSI for treblized device with 8.1 or P vendor is out and probably work on our LeEco Le Max 2
link : https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659
Click to expand...
Click to collapse
Hello, I follow the tutorial inside the link to brush up. My mobile phone has a vender partition, and then the phone has been restarted, can not enter the system. Is there any way? Thank you, look forward to your response...
With an older Lineage OS 16 i got to the boot animation and it was stuck on it (After it ended). I will try pulling out logcat later today.
binbin5678 said:
Hello, I follow the tutorial inside the link to brush up. My mobile phone has a vender partition, and then the phone has been restarted, can not enter the system. Is there any way? Thank you, look forward to your response...
Click to expand...
Click to collapse
Try with nitrogen pie
nageswarswain said:
Try with nitrogen pie
Click to expand...
Click to collapse
Thanks man. The Android Q with nitrogen pie has booted.
Looks like the system is unstable (expected) but the sim card is not detected.
TheMichalos said:
Thanks man. The Android Q with nitrogen pie has booted.
Looks like the system is unstable (expected) but the sim card is not detected.
Click to expand...
Click to collapse
It will be detected.give some more time and reboot the device
flash this if Q can't boot with AEX vendor ! might help
https://forum.xda-developers.com/showpost.php?p=79510791&postcount=1923
Someone had test this on Le Max 2 , thx a lot !
pssyz said:
https://forum.xda-developers.com/showpost.php?p=79510791&postcount=1923
Someone had test this on Le Max 2 , thx a lot !
Click to expand...
Click to collapse
I have tested this. It was very sluggish and Google Play did not work. In fact I branched off to @erfanoabdi as the images given in your post did not work for me. Besides during that time I had a compounded issue of my cable failing highly intermittently which I realized on installing AEX 09/05 version and hence I did not post any reply here. I suspect the cable as it was giving blank screen with back-light turning on/off and exactly the same was happening with AEX 09/05.
The sys img at https://mirrors.lolinet.com/firmware/gsi/Generic-Aonly-Q-20190411-ErfanGSI.img.7z does boot up.
Requirement of a Permissive Selinux ROM was met with the installation of Nitrogen OS at http://dl.nixadm.ru/nitrogen-9-x2/Nitrogen-OS-P-x2-20190221-1712.zip. Permissiver is not required. Best practice would be to boot up Nitrogen once before installing Q preview by @erfanoabdi. Initial setup by Google loops thru SIM and net selection.
GApps install as per the post at https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659 is not suggested. Returns as "Incompatible". If anyone wants to test please modify the link given in first post at https://forum.xda-developers.com/pr...ment/rom-android-p-developer-preview-t3816659 under "Notes" - it has an error - http://install https://www.apkmirror.com/apk/googl...6-0-89-100400-239467275-android-apk-download/ - marked in blue.
VoLTE is listed under global bugs. See attached screen shots for details. Need to wait for a while to get dialpad.
Since I saw a new GSI with "10", which I assumed as Q - not sure though, I tried https://mirrors.lolinet.com/firmware/gsi/Generic-Aonly-10-20190509-ErfanGSI.img.7z.
It ended up with boot loop.
VoLTE issue is similar to what was experienced with O and P at the beginning. The good news is that a mfr dumped unit could move from M to Q probably, thanks to devs.
Edit: Forgot to add...no issue with secure WiFi as seen on YouTube video link given. First boot takes a while so wait.
Using as daily driver..booted even in dp1 gsi from March with nitrogen pie base
---------- Post added at 11:35 AM ---------- Previous post was at 11:25 AM ----------
Boots also with Baikal and Ros from 14.04 as pie trebled rom based. And ..bad things are fp,hotspot and mirrorcast are remaining bugs in Q dp.3 from 10.05.ok and smooth overall
bilausdaniel said:
Using as daily driver..booted even in dp1 gsi from March with nitrogen pie base
Click to expand...
Click to collapse
I did not try March build of Q. But now it is not being seen at download site though saw it first time when I downloaded April build. Is it stable sort of? Could you get play store to work?
Yes.all works except those bugs I have wrote..lollinet Erfan servers are down for the moment.i am using pixel a only 10.05 gsi build
Sent from my LEX820 using Tapatalk
bilausdaniel said:
Yes.all works except those bugs I have wrote..lollinet Erfan servers are down for the moment.i am using pixel a only 10.05 gsi build
Sent from my LEX820 using Tapatalk
Click to expand...
Click to collapse
I hopped on to Pixel A only first but it did not boot. Must be the freaking cable of mine creating such mess up. I do not use FP or cast. Hotspot, yes occasionally. May be I will give it a try later. Thank you.
And lolinet servers are working but the speed i get is 370KB/Sec....does not matter
Edit: no luck on Pixel A 10/05 build. Boot loop. No idea if I've to install previous one and dirty flash sys img of 10/05 on top. Base Nitrogen P 22/2.
What's the secret to turn in the Google play
Install latest play services..You need gms 17.0.22.
---------- Post added at 07:55 AM ---------- Previous post was at 07:54 AM ----------
With Baikal works even hotspot now..so fingerprint and mirrorcast are only bugs remaining
bilausdaniel said:
Install latest play services..You need gms 17.0.22.
---------- Post added at 07:55 AM ---------- Previous post was at 07:54 AM ----------
With Baikal works even hotspot now..so fingerprint and mirrorcast are only bugs remaining
Click to expand...
Click to collapse
I can find 17.1.22, but it won't install.
rob_z11 said:
I can find 17.1.22, but it won't install.
Click to expand...
Click to collapse
It installed on Pixel A 20190411 alright. Gave "device not certified" error. Went to recommended Google site, input GSF id, got a registered id number too. But continued to give same error even after that too. Pixel A 20190510 boot loops on my device - never came out even after 35 minutes. Tried with Nitrogen and Baikal.
Generic A behaved exactly the same way with regard to 04/11 and 05/09 builds but did not try installing GMS 17.1.22 on that couple of days back. Moved to try Pixel A as @bilausdaniel had mentioned that Pixel A is being used as a daily driver.
However due to data/call requirements on VoLTE SIM moved back to P.
Edit: I installed nodpi version of GMS 17.1.22 at -https://www.apkmirror.com/apk/google-inc/google-play-services/google-play-services-17-1-22-release/google-play-services-17-1-22-020400-245988633-android-apk-download/download/
On trying again Pixel A 20190411 the above GMS 17.1.22 registered got a new Registered Android ID, able to login. It took some time during which "Google Play Services requires an action" was screaming down as notifications.
All errors you had are because you didn't keeped old pie system.nitrogen or baikal.you must do dirty flash of Q pixel a image from 10.05. over previous pie rom.so don't wipe anything in twrp.ok?just flash as image + permissiver2+zygote2.mount system and vendor.reboot.
Sent from my LEX820 using Tapatalk
---------- Post added at 06:29 PM ---------- Previous post was at 06:27 PM ----------
After reboot of Q install right away that GMS apk.let it update all apps.
Sent from my LEX820 using Tapatalk
bilausdaniel said:
All errors you had are because you didn't keeped old pie system.nitrogen or baikal.you must do dirty flash of Q pixel a image from 10.05. over previous pie rom.so don't wipe anything in twrp.ok?just flash as image + permissiver2+zygote2.mount system and vendor.reboot.
Sent from my LEX820 using Tapatalk
---------- Post added at 06:29 PM ---------- Previous post was at 06:27 PM ----------
After reboot of Q install right away that GMS apk.let it update all apps.
Sent from my LEX820 using Tapatalk
Click to expand...
Click to collapse
You are right. I was wiping P system. But that doesn't still explain why dirty flashing Pixel A 05/10 over a booted Pixel A Q 04/11 resulted in boot-loop. Anyway now I'm on 04/11 build. Will try dirty flashing 05/10 later after checking how my unit behaves. Thank you.

Categories

Resources