Redmi Note 4 SD Or Redmi Note 4X Suddenly Turned Off And Became Unresponsive.
The Device Is Not Responding to anything.
No Fastboot No Recovery Mode Nothing.
Just The Red Blinking ight Plz Help ...
And Also i Tried These
1.Opened The Phone and disconnected the battery and connected it again nothing happens
2.connected the phone to pc nothing happens no response of device being connected to the pc
3.also tried putting it to charge nothing happens just the annoying red blinking
and also if i disconnect the battery and then tried still nothing happens..
anybody plz help.....
agentliquid47 said:
Redmi Note 4 SD Or Redmi Note 4X Suddenly Turned Off And Became Unresponsive.
The Device Is Not Responding to anything.
No Fastboot No Recovery Mode Nothing.
Just The Red Blinking ight Plz Help ...
And Also i Tried These
1.Opened The Phone and disconnected the battery and connected it again nothing happens
2.connected the phone to pc nothing happens no response of device being connected to the pc
3.also tried putting it to charge nothing happens just the annoying red blinking
and also if i disconnect the battery and then tried still nothing happens..
anybody plz help.....
Click to expand...
Click to collapse
Does it respond when u connect it to pc ? I mean not on phone display but do u hear any connecting sound on pc?
I think your phone is in EDM mode, so connect the phone to the pc , download fastboot Rom and flash it via Xiaomi flash tool.
miteshladva said:
I think your phone is in EDM mode, so connect the phone to the pc , download fastboot Rom and flash it via Xiaomi flash tool.
Click to expand...
Click to collapse
nothing happens when connecting to pc
Dylan*123 said:
Does it respond when u connect it to pc ? I mean not on phone display but do u hear any connecting sound on pc?
Click to expand...
Click to collapse
no its doesn't respond only the red blinking light keeps blinking nothing else
agentliquid47 said:
no its doesn't respond only the red blinking light keeps blinking nothing else
Click to expand...
Click to collapse
U can try flashing fastboot stock rom it may work for u.
What were last changes or it was sudden?
Kindly also reply with other configuration on device.
IODroids said:
What were last changes or it was sudden?
Kindly also reply with other configuration on device.
Click to expand...
Click to collapse
my device is redmi note 4 sd 4gb ram variant with 64 gb storage
i had miui 10 global stable rooted with magisk and i was playing pubg vikendi map . phone just turn off suddenly battery percentage was approx 70 so no problem there . i have given it to service center i will update the thread once i get the info. but they think the power ic isn't working so ....not a software issue that is sure.......
agentliquid47 said:
my device is redmi note 4 sd 4gb ram variant with 64 gb storage
i had miui 10 global stable rooted with magisk and i was playing pubg vikendi map . phone just turn off suddenly battery percentage was approx 70 so no problem there . i have given it to service center i will update the thread once i get the info. but they think the power ic isn't working so ....not a software issue that is sure.......
Click to expand...
Click to collapse
I have also noticed the lagging in game after vikendi snow map in pubg in redmi note 4.I think something is wrong with update or only m the one facing this issue after updating ?
I got the same problem 2 month ago. I changed battery and bought an edl cable without any success
The Problem Was With Power IC No Battery Or Motherboard Problem But Xiaomi Care Said I Have To Replace Motherboard...So Suggest You Not To Go Xiaomi CC ...If Your Phone Is Out Of Warranty
agentliquid47 said:
The Problem Was With Power IC No Battery Or Motherboard Problem But Xiaomi Care Said I Have To Replace Motherboard...So Suggest You Not To Go Xiaomi CC ...If Your Phone Is Out Of Warranty
Click to expand...
Click to collapse
Ok
any solution? the same happens to me. the pc does not recognize me. I want to turn it on, and only the red light blink
A mi me pasa algo parecido, pero a mi si me reconoce Qualcomm HS-USB QDLoader 9008 (COM4) en test point. Sigo todos los pasos de los tutoriales pero me da error una y otra vez, llevo una semana intentándolo y no puedo. Unas veces me da este error "cannot receive hello packet" y otras "can not read from port COM4" y también
"se ha alcanzado el final del archivo. (0x80070026: Receiving hello packet", ya no se que hacer. En alguna ocasión me ha hecho el amago de empezar a flashear pero no lo ha hecho. He cambiado de roms .tgz, de xiaomiMiFlash y no hay manera.
Dylan*123 said:
Does it respond when u connect it to pc ? I mean not on phone display but do u hear any connecting sound on pc?
Click to expand...
Click to collapse
I have the same problem instead I didn't open it and remove the battery
but when i connect it to PC it give the sound that it is connected then that it is being disconnected but it didn't show up in my devices in PC
Related
Hi. I recently flashed ulBlDoom.zip to my phone when trying to install the newest TW ROM, following the instructions he provided. I guess I wasn't paying attention or something, but that zip file is for phones that have the bootloader unlocked, and mine is not. When it came time to put the phone in flash mode to flash the kernel/baseband package, the phone refuses to go in to flash mode. The light goes green when plugging it in to the computer with the back button held, but the computer does not recognize the phone.
I have tried reinstalling the Sony programs, installing the drivers via the driver executable that came with flashtool, rebooting the computer...nothing works. Does anyone have any suggestions or know the solution to this problem? The only other thread I found with a similar problem was with an Xperia Ray, and his solution of "trying it 5-6 times" isnt working.
Did you try the repair section in support zone with PC companion? It will get you back to stock and you can start again.
jkirk737 said:
Did you try the repair section in support zone with PC companion? It will get you back to stock and you can start again.
Click to expand...
Click to collapse
ya fast solution or flash Da custom kernal if u able to access flashtool..
jkirk737 said:
Did you try the repair section in support zone with PC companion? It will get you back to stock and you can start again.
Click to expand...
Click to collapse
Yes. The computer does not recognize the phone. The light turns green on the phone when you hold the back button and connect, but that's it. I hold it, hold it, hold it..eventually, the light goes off, and it starts booting, and freezes.
FlyBoy276 said:
Yes. The computer does not recognize the phone. The light turns green on the phone when you hold the back button and connect, but that's it. I hold it, hold it, hold it..eventually, the light goes off, and it starts booting, and freezes.
Click to expand...
Click to collapse
Try update ur driver. Maybe ur driver is an old version.. i have a same problem with u.. then i update the driver and the computer recognize my phone.. sory for my english
Sent from my X10 SO-01C using XDA App
so...u can fix it?
krocoMania said:
Try update ur driver. Maybe ur driver is an old version.. i have a same problem with u.. then i update the driver and the computer recognize my phone.. sory for my english
Sent from my X10 SO-01C using XDA App
Click to expand...
Click to collapse
Hi!....i have the same problem!!!.....and now my X10 is bricked!!.....how u fix it?...u can solved this problems?.....plz, tell me....and help me too....thanks....and sorry for my english too.
Hugs.
i've the same problem pc don't recognize my x10 help
I FIX IT!!!
krocoMania said:
Try update ur driver. Maybe ur driver is an old version.. i have a same problem with u.. then i update the driver and the computer recognize my phone.. sory for my english
Sent from my X10 SO-01C using XDA App
Click to expand...
Click to collapse
alyernon said:
Hi!....i have the same problem!!!.....and now my X10 is bricked!!.....how u fix it?...u can solved this problems?.....plz, tell me....and help me too....thanks....and sorry for my english too.
Hugs.
Click to expand...
Click to collapse
Hey, I fix it!!!....im gonna explain in spanish....if google translator it doesnt work, tell me, and ill tried to translate in english:
1.- Use la carpeta antigua donde tenía el Flashtool 0.2.9.1, y que use para dejar mi X10a Froyo con X10i Gingerbread de Wolf, la version 6.0.
2.- Ejecute Flashtool como Administrador en Win 7
3.- Saqué la bateria del telefono
4.- Pinche flash en el programa
AQUI LA CLAVE:
5.- Hice un Force Flashtool, es decir, puse la bateria al telefono al mismo tiempo en que apretaba el boton atras (Force Flashtool: put the battery at the same time to hold on the back button)
6.- Al hacer esto, actualice los drivers tambien.
7.- Voilá!...Listo!....Done!
Ufff...sólo estuve 12 horas hueveando con un nudo en la garganta y transpirando!
Espero les resulte y les sirva, sobre todo a Flyboy.
Not sure if the post before this tells you to do this (I can't read Spanish), but the easiest way is probably by flashing the stock X10 firmware via Flashtool.
The firmwares can be found here: http://forum.xda-developers.com/showthread.php?t=920746
I would install the 2.3.3 firmware to save yourself trouble of updating the software again.
For future reference, you can unlock the bootloader by the process outlined in this thread: http://forum.xda-developers.com/showthread.php?t=1254087
Good to all, my P9000, not quite know why, yesterday had a problem with the rear camera is no longer detected, I tried to do a reset manufactures, not being possible, (??????) ,, then I chose to reinstall the rom originates via flashtools, went well, but when you turn the device does not respond, and at this point does nothing, nothing at all ... someone expert in these assuntis can help me before shipping guarantee .. ..
At this point the device, is dead, not power, is not detected by the PC, does not load anything ... ... does not enter recovery ....... please ask for help, because this time was the one who had ..... well there
Enviado do meu SHIELD Tablet K1 através de Tapatalk
Try to push power on button a bit longer at first start
No... A try everything... When charge nothing, no Led changing nothing... I think the its off
Enviado do meu thor através de Tapatalk
The last chance.
I have similar problem.
I had to disconnect the battery.
I flashed the new firmware via flashtool without battery. After the flashing, I connected the battery.
Uff.
The phone was OK.
How you do that.... How to disconect the battery....
I have do it, I can instal de rom, but the problem is not the rom.. Ia other think else, maybe the mathrtboard... It not reboote... Instal the rom but no reboote... Is dead, I try to go for delivery it to [email protected] to the warranty.....
Enviado do meu thor através de Tapatalk
Hello
I tried to disable google apps on my redmi note 4 using shortcutmaker app now the phone is stuck on MI logo
My device is locked
can you please tell me how can i overcome this boot loop error
Try download or edl Mode.
Enviado do meu H60-L04 através de Tapatalk
Prolixo said:
Try download or edl Mode.
Enviado do meu H60-L04 através de Tapatalk
Click to expand...
Click to collapse
How can i get into edl mode, my device is locked .
i tried flashing with diy cable but when i release the button in cable, it says usb not recognized on pc
Got it fixed by flashing fastboot rom using DIY cable that i made myself
aaqib67 said:
Got it fixed by flashing fastboot rom using DIY cable that i made myself
Click to expand...
Click to collapse
hey ive got the same problem do you mind helping me i've tried to make a deep flash cable without succes :crying::crying:
donwalex said:
hey ive got the same problem do you mind helping me i've tried to make a deep flash cable without succes :crying::crying:
Click to expand...
Click to collapse
Bro i suggest you to go to service center if ur device is under warranty they will fix the issue in much better way rather than going with deep flash cables :silly:
donwalex said:
hey ive got the same problem do you mind helping me i've tried to make a deep flash cable without succes :crying::crying:
Click to expand...
Click to collapse
If the service Centre is available in your city then you should go there and they will fix it for you but if it's not available just like in my case then watch few videos on YouTube to make the deep flash cable and if you are too lazy to do it then Show the video to any electrician or someone who knows soldering. Good luck
hello
I'm sorry for my english.
My device was hardbrick while hwota was loading, it suddenly closed on 'install update packing' screen. It does not enter fastboot mode. It does not enter Recovery mode. usb seems to be in the device manager. the device does not open at all.
What rom were you trying to flash?
Sent from my ALP-L29 using Tapatalk
royhanks3 said:
What rom were you trying to flash?
Sent from my ALP-L29 using Tapatalk
Click to expand...
Click to collapse
C636-142 To c432-142
There's currently no way to fix it if it's in that state.
DevrimSeven60 said:
C636-142 To c432-142
Click to expand...
Click to collapse
Unfortunately, I think it's bricked for good "for now". Similar thing happened to my Mate 10 (non pro on 134 noxloader rom). Don't spend any money on DC tools to try and fix, right now it's unfixable.
Sent from my ALP-L29 using Tapatalk
DevrimSeven60 said:
hello
I'm sorry for my english.
My device was hardbrick while hwota was loading, it suddenly closed on 'install update packing' screen. It does not enter fastboot mode. It does not enter Recovery mode. usb seems to be in the device manager. the device does not open at all.
Click to expand...
Click to collapse
Hi good day.
I have been following your work from another page, and now in XDA.
I had not read your message, and, I changed the recovery for the stock, and, I was an idiot to close the bootloader.
What happened? Brick simple on my cell phone, did not come out (because I fixed it) of the image of erecovery (EMUI) without tabs or options, a rather rare image.
How do I solve it:
1. I did not enter fastboot, I did not correctly enter the stock recovery (I had deleted the twrp), I had closed the bootloader (my stupidity)
2. Be patient and wait for the battery to run out (wait a day for it).
3. Open cmd and place the command to open the bootloader (fastboot oem unlock) and execute.
4. Put the device in fastboot mode when connecting to the laptop (I did not work several times, the fastboot came out with error FUNC No 10 and NO 2), after numerous attempts and not to let it charge the battery too much (because it was restarted and towards brick in the EMUI logo), correctly enter the fastboot and unlock, when you enter step 3 automatically, it will be executed. I had an advance in removing the cell phone from the brick.
5. It reboots and wonderfully happened to the Rom (that had previously installed), that is to say, the erase was not executed when the bootloader had previously closed.
6. As I had little energy, it was turned off, but I connected it and entered charging mode without restarting (before I did it).
7. Wait for a load of at least 5%, and install the Catuva21 TWRP from the tutorial.
8. I put it by command to restart in fastboot, but I generate error (Error Func No 10 and No 2).
9. I turn off the cell phone and with volume up and power key
10. Enter the TWRP correctly, verify that it is installed.
11. Restart system and log in to the system. I had not deleted anything, but to avoid problems, I hope to load 55% and execute the steps to install the rom.
12. Enjoy and dry spilled tears.
Experience lived and I hope you do not do something that developers do not advise.
Gracias and happy day.
gaduarte7 said:
Hi good day.
I have been following your work from another page, and now in XDA.
I had not read your message, and, I changed the recovery for the stock, and, I was an idiot to close the bootloader.
What happened? Brick simple on my cell phone, did not come out (because I fixed it) of the image of erecovery (EMUI) without tabs or options, a rather rare image.
How do I solve it:
1. I did not enter fastboot, I did not correctly enter the stock recovery (I had deleted the twrp), I had closed the bootloader (my stupidity)
2. Be patient and wait for the battery to run out (wait a day for it).
3. Open cmd and place the command to open the bootloader (fastboot oem unlock) and execute.
4. Put the device in fastboot mode when connecting to the laptop (I did not work several times, the fastboot came out with error FUNC No 10 and NO 2), after numerous attempts and not to let it charge the battery too much (because it was restarted and towards brick in the EMUI logo), correctly enter the fastboot and unlock, when you enter step 3 automatically, it will be executed. I had an advance in removing the cell phone from the brick.
5. It reboots and wonderfully happened to the Rom (that had previously installed), that is to say, the erase was not executed when the bootloader had previously closed.
6. As I had little energy, it was turned off, but I connected it and entered charging mode without restarting (before I did it).
7. Wait for a load of at least 5%, and install the Catuva21 TWRP from the tutorial.
8. I put it by command to restart in fastboot, but I generate error (Error Func No 10 and No 2).
9. I turn off the cell phone and with volume up and power key
10. Enter the TWRP correctly, verify that it is installed.
11. Restart system and log in to the system. I had not deleted anything, but to avoid problems, I hope to load 55% and execute the steps to install the rom.
12. Enjoy and dry spilled tears.
Experience lived and I hope you do not do something that developers do not advise.
Gracias and happy day.
Click to expand...
Click to collapse
Did you have a hard brick on your device? I can not enter Fastboot, we are waiting for board software in China.
Try low battery, do it several times in a row, it has worked for me.
Have it connected to the PC, and with volume - and turn it off forcibly, and, let it restart. At some point you will successfully enter the fastboot, it is patience. Or, leave it to turn off, no load connect to the PC with volume -, and, repeat it until you manage to enter it, can be several times. It has happened to me three times.
I hope it helps you.
Good luck.
:fingers-crossed::fingers-crossed::laugh::laugh::good:
gaduarte7 said:
Try low battery, do it several times in a row, it has worked for me.
Have it connected to the PC, and with volume - and turn it off forcibly, and, let it restart. At some point you will successfully enter the fastboot, it is patience. Or, leave it to turn off, no load connect to the PC with volume -, and, repeat it until you manage to enter it, can be several times. It has happened to me three times.
I hope it helps you.
Good luck.
:fingers-crossed::fingers-crossed::laugh::laugh::good:
Click to expand...
Click to collapse
For Hardbrick, I think these methods will not be the solution.
but thanks.
I'm not sure what's wrong with my friends mate 10. It's stuck on the 4glte screen and the red light blinks. I'm not sure what's wrong or how to fix it. I can't get into fastboot or recovery or download mode.
Any help is appreciated. Thank you.
My problem is still going on. No board software for BLA-L29.
Has this S/W ever been released?
yfaykya said:
Has this S/W ever been released?
Click to expand...
Click to collapse
I did not understand. I have board software file for BLA.
I have a hard brick mate 10 pro. Kirin 970.
Can Funky huawei help me? I have board software but I can not load it.
http://i.hizliresim.com/WDZ3oQ.jpg
DevrimSeven60 said:
I have a hard brick mate 10 pro. Kirin 970.
Can Funky huawei help me? I have board software but I can not load it.
http://i.hizliresim.com/WDZ3oQ.jpg
Click to expand...
Click to collapse
No, FunkyHuawei won't be able to do anything for you unfortunately
Sent from my Mate 10 using Tapatalk
DevrimSeven60 said:
I have a hard brick mate 10 pro. Kirin 970.
Can Funky huawei help me? I have board software but I can not load it.
http://i.hizliresim.com/WDZ3oQ.jpg
Click to expand...
Click to collapse
Can you still access to the erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
SADNESS
Hi guys, sorry English.
I'm from Brazil and I also gave a hard brick on my mate 10 pro, so I understood the new updates from May / 2018 could not be done through hwota.
I already did everything of phoenix does not work, I tried to make a cable dongle usb, also did not work.
now I can only cry because it is a device that cost a lot of money and has no solution.
MY original version is BLA-L09
BYE GUYS
felipecps said:
Hi guys, sorry English.
I'm from Brazil and I also gave a hard brick on my mate 10 pro, so I understood the new updates from May / 2018 could not be done through hwota.
I already did everything of phoenix does not work, I tried to make a cable dongle usb, also did not work.
now I can only cry because it is a device that cost a lot of money and has no solution.
MY original version is BLA-L09
Boa dia, eu tb sou do Brasil e estou na mesma situação sendo que o meu é BLA-L29
Click to expand...
Click to collapse
andre_ferreira said:
felipecps said:
Hi guys, sorry English.
I'm from Brazil and I also gave a hard brick on my mate 10 pro, so I understood the new updates from May / 2018 could not be done through hwota.
I already did everything of phoenix does not work, I tried to make a cable dongle usb, also did not work.
now I can only cry because it is a device that cost a lot of money and has no solution.
MY original version is BLA-L09
Boa dia, eu tb sou do Brasil e estou na mesma situação sendo que o meu é BLA-L29
Click to expand...
Click to collapse
Fala cara beleza?!
Nos ferramos, perdi 3 conto...acho que vai demorar muito pra resolver isso.
estava fazendo o rebrand para a nova versão e não sabia que estava brickando....coisa da huawei, agora o porque não sei.
Tentei dc phoenix e o easy firmware nenhum funciona, no site da funkyhuawei não tem solução pra esse brick de tela preta.
acho que ja era cara!!!
Click to expand...
Click to collapse
Guys, it's an English forum, so please keep it that way!
need help! I tried to root my samsung galaxy a10s phone (SM-A107M). went wrong now my device has hard brick ...
can someone help me with debrick.img? to save my device ?! thank you very much
Can you boot into download mode? If you can then you can flash a full firmware with Odin.
muhammad42620 said:
Can you boot into download mode? If you can then you can flash a full firmware with Odin.
Click to expand...
Click to collapse
No, it won't start, keep the black screen ... add me on telegram @danilobrother
Gabas143514 said:
No, it won't start, keep the black screen ... add me on telegram @danilobrother
Click to expand...
Click to collapse
Or just talk about it here since your solution may be useful to others as well.
okay! so I rooted my Samsung galaxy a10s SM-A107M, when I went to install the magisk-manager apk, my phone just turned off by itself. I took an assistance, they reported that the internal memory was corrupted, then I watched some tutorials, but I found some solutions, but I did not find exactly for the model of my cell phone, I believe that my device is with HardBrick, when I connect to the computer it is disconnected and connecting, so my cell phone can't connect, I need the unbrick file to put in the micro SD and try to restart, to see if my problem is solved ... I see a lot of reports from users with the same problem, it would be very gratifying to be able help me.
what is the point of this section if mods wont help ?
Gabas143514 said:
okay! so I rooted my Samsung galaxy a10s SM-A107M, when I went to install the magisk-manager apk, my phone just turned off by itself. I took an assistance, they reported that the internal memory was corrupted, then I watched some tutorials, but I found some solutions, but I did not find exactly for the model of my cell phone, I believe that my device is with HardBrick, when I connect to the computer it is disconnected and connecting, so my cell phone can't connect, I need the unbrick file to put in the micro SD and try to restart, to see if my problem is solved ... I see a lot of reports from users with the same problem, it would be very gratifying to be able help me.
Click to expand...
Click to collapse
Same problem here. I have second device which is working perfectly, if someone have solution how to create scatter file or something with working device please post an update.
rberet said:
Mesmo problema aqui. Eu tenho um segundo dispositivo que está funcionando perfeitamente, se alguém tiver solução como criar arquivo scatter ou algo com dispositivo funcionando por favor poste uma atualização.
Click to expand...
Click to collapse
did you manage to solve?
That's very similar to my issue execpt I tried to install TWRP.
Gabas143514 said:
need help! I tried to root my samsung galaxy a10s phone (SM-A107M). went wrong now my device has hard brick ...
can someone help me with debrick.img? to save my device ?! thank you very much
Click to expand...
Click to collapse
Badger50 said:
Or just talk about it here since your solution may be useful to others as well.
Click to expand...
Click to collapse
ConcernedGuy120 said:
That's very similar to my issue execpt I tried to install TWRP.
Click to expand...
Click to collapse
Je4n.vito said:
did you manage to solve?
Click to expand...
Click to collapse
rberet said:
Same problem here. I have second device which is working perfectly, if someone have solution how to create scatter file or something with working device please post an update.
Click to expand...
Click to collapse
Hi! I just made a tutorial for unbrick this device, cuz i also bricked my A10s.
[GUIDE][SM-A107][MTK6765] Unbrick your Samsung Galaxy A10s - Stuck on a black screen, recognized as Preloader USB VCOM and cycling rebooting
Hi, yesterday I bricked my Galaxy A10s by flashing a custom recovery by Odin (The phone doesn't enter in Download or recovery modes, it just does nothing): Immediately I started looking for how to fix it, and after a lot of research, here is how...
forum.xda-developers.com