Upgrading to a 9.0 GSI Treble "A/B" partition style device?

Upgrading to a 9.0 GSI Treble "A/B" partition style device? - Xiaomi Mi Pad 4 Questions & Answers

Hi everyone!
I've bought a Mi Pad 4 LTE from Aliexpress and haven't already received it. (Specs says Oreo is installed).
I've read FAQs about Treble and still have questions :
1) From my understanding, I will receive a "A" partition style device, correct ?
2) When I get it, if I connect it to my WIFI Lan and update it to the latest online MIUI, will I be able to choose to upgrade to an "AB" partition style device (or not) ?
(FAQ says "For devices upgrading to Android 9, "system-as-root" is not mandatory"... )
Upgrading it to "AB" seems to be better as it supports seamless OTA updates & "A" is now considered as "old/legacy", isn't it?
3) Is it better to install a compatible ROM from "xda-developers / Project Treble / Treble-Enabled Device Development A/AB ROMS"
examples: [9.0][GSI][Treble][ARM64/ARM][A/AB][Official]OctopusOS[20/11/2018]
[9.0][GSI][Treble][Enforcing][VoLTE][Official]HavocOS V2.0 [27/10/2018]
** OR **
a ROM from "xda-developers / Xiaomi Mi Pad 4 / Xiaomi Mi Pad 4 ROMs, Kernels, Recoveries, & Other Development"
examples: [ROM][9.x][UNOFFICIAL] CarbonROM | cr-7.0 [clover /MI PAD 4]
[ROM][9.x][UNOFFICIAL] Havoc OS v2.0 | [clover /MI PAD 4]
4) What are the rooting possibilities apart from Magisk? Can I trust Magisk?
My criteria:
Low draining batteries, GPS, BT output, phone, LTE/4G, sms, dark theme, 802.11ac simultaneous dual band 2.4/5GHz wifi, no bloatware or google spyware stuff, unlocked/rooted, open source ROM.
Any recommendation is welcome!
Thanks & Merry XMAS!

Ad. 1. You are correct.
Ad. 2. The device ia A style or A/B style. You will have to modify vendor, boot and add additional partition for B.
Ad. 3. Do you ask about... What is better ported rom or rom created for device? I suggest to pay attention to the no-gsi aicp mordiford. It is rom created in Japan by mi pad 4 owner for mi pad 4. Ported roms creates devs not owning pad 4.
Ad. 4.? I do not know. Do you know, your tablet has 20+ partitions. If you install custom rom you will have many apk from xiaomi on the not touched partitions. We have to trust the aps will not work and will not spy us. The magisk is 1000% more trustable.

Thank you for your answers Tomek0000, I really appreciate it.
Ad. 2. The device is A style or A/B style. You will have to modify vendor, boot and add additional partition for B.
Click to expand...
Click to collapse
1) What do you mean by "B"? (In the FAQ, they only talk about "A only" or AB). Is "B only" another type or it's just short for AB?
2) Do you think it's worth changing from A to B/AB?
3) Is there a procedure somewhere that I can follow "to modify vendor, boot and add additional partition for B"?
(since I assume that the MIUI online update from Oreo to Pie won't change my device from A to AB...)
Ad. 3. Do you ask about... What is better ported rom or rom created for device?
Click to expand...
Click to collapse
Not really, I guess that this rom is "created for device"? : [ROM][9.x][UNOFFICIAL] CarbonROM | cr-7.0 [clover /MI PAD 4]
I've just read that "Porting" means shifting & modifying another android phones OS (Operating System/ User Interface) to your own phone.
For the moment, I don't see the point in choosing a ported rom.
I'm just looking for the most up to date vanilla pie ROM with maximum hardware compatibility inside a Generic System Image (no apk bloatware)
This rom isn't a "ported rom", is it? [9.0][GSI][Treble][ARM64/ARM][A/AB][Official]OctopusOS[20/11/2018]
I suggest to pay attention to the no-gsi aicp mordiford. It is rom created in Japan by mi pad 4 owner for mi pad 4. Ported roms creates devs not owning pad 4.
Click to expand...
Click to collapse
I did but it doesn't seem to correspond to what I'm looking for...
Ad. 4.? I do not know. Do you know, your tablet has 20+ partitions. If you install custom rom you will have many apk from xiaomi on the not touched partitions.
Click to expand...
Click to collapse
Even with this rom? : [AOSP 9.0] [EXPERIMENTAL] [2018-11-09] Phh-Treble
We have to trust the aps will not work and will not spy us. The magisk is 1000% more trustable.
Click to expand...
Click to collapse
The less apk bloatware, the better. Good to know that we can trust magisk.
Thanks very much!
Take Care

A/B has sense of 2 partitions for the same. You can fail during flashing A but you will have all time working B.
You have no option to change if you have A only device.
You have rom for device X but you want it for Y. You compile it and run on Y. Many things does not work. You fix it. If you have Y, you do it good if you do not have, your fixes will be blind, only with info abot results from forum.
The other way is if you own Y and want to prepare rom for your own use.
Ported rom brings only /system. Aicp comes with kernel. It will not replace all partitions, no chance. Especial vendor for treble is xiaomi's interes. We will have always some partitions not touched with xiaomi's content.

Sorry but this time, your explanations are not clear.
Anyone else is welcome to take part in this discussion.

vindieu said:
Anyone else is welcome to take part in this discussion.
Click to expand...
Click to collapse
From my limited understanding, if a device is A only, it cannot be "upgraded" to an A/B device, since the partition scheme is completely different. Since the Mi Pad 4 is an A device, that's what we have and that's it. That's still not the end of the world, since we can take advantage of GSI's.
The other point I think he was trying to make was that it is usually better to use ROM's that were created by someone that actualy owns the device, since they have more motivation to try to fix the smaller things, compared to someone who ports to a device they don't own. GSI's are an example of this, and although they seem to work pretty well, they are still not perfect. The best way it to test and see for your self! Happy flashing!

HijoProdigo said:
From my limited understanding, if a device is A only, it cannot be "upgraded" to an A/B device, since the partition scheme is completely different. Since the Mi Pad 4 is an A device, that's what we have and that's it. That's still not the end of the world, since we can take advantage of GSI's.
The other point I think he was trying to make was that it is usually better to use ROM's that were created by someone that actualy owns the device, since they have more motivation to try to fix the smaller things, compared to someone who ports to a device they don't own. GSI's are an example of this, and although they seem to work pretty well, they are still not perfect. The best way it to test and see for your self! Happy flashing!
Click to expand...
Click to collapse
No, you can force AB partition scheme by flashing MakeMeSAR.zip. Just do a Google search on MakeMeSAR.zip.

Related

[ROM] Viewsonic Viewpad 7 Froyo Enhanced

Viewpad 7a 'Enhanced' (RC1)
Viewpad 7a is a quick and dirty modification of the stock firmware from Viewsonic. This should be a decent alternative to the stock image, with improved performance and appearance.
Highlights:
- Removed the 'Welcome' logo and replaced with stock android boot animation.
- Replaced stock boot image with overclocked version: Credit goes to TJ Style @ Modaco.
- Minor framework modifications (got rid of annoying white status bar, and misc images).
- All packaged applications remain, but I will add or remove any upon request.
- Enabled hardware acceleration.
Notes:
- Firmware should work with compatible devices such as: Cherry Mobile Superion, Commtiva Linx N700, Olivepad VT-100, Spice MI700, and Camangi FM600....but I do not have these devices, so I cannot verify. As always make a backup before installing any custom firmwares.
Known Issues:
- You may receive an error from Swype upon initial use to the effect that 'it's not meant for this firmware and may be limited'. I haven't had any issues since seeing this, and have disregarded it for the time being.
- Root condition has been known to intermittently go away. Remedy this by running Super One Click again after you've flashed the ROM.
****************************************************************************************************
I'm currently working on a Vanilla AOSP port of Gingerbread for this device, and this will be the main focus of my effort. I will try my best to answer any bug reports or requests for changes to this firmware, but won't make any promises.
As always a big thanks to everyone in the Android community that shares they're knowledge and support.
To install this firmware use ClockworkMod to flash the zip file. (I use version 2.5.1.2). Information on rooting and installing an alternative recovery partition is available here.
DISCLAIMER: I cannot be held liable for anything you do to your Viewpad 7 (or equivalent device). Make sure you are comfortable with recovery tools, such as ClockworkMod, before proceeding.
****************************************************************************************************
Update (August 22nd, 2011): I've deactivated the download link until I get time to put out a better update with ITE support.

If I am not wrong this device is similar to Commtiva N700/ Spice Mi-700/ Olive Pad VT-100.
Nice to hear someone taking the initiative for development on this device

I've added the compatible devices I'm aware of to the first post. I may take advantage of CM scripting in the Gingerbread port. Will update when I have time. I've attached a screenshot from the froyo firmware below if anyone is interested.
I've been using it for the past two days without any issues. I borrowed a SIM card from a friend today to test the data connectivity and call function. Both work flawlessly. The battery life isn't as good with the CPU overclocked, but it's worth it for the extra boost of performance.

I was planning to get this device with my first salary which is few months from now
BTW, To make things easier you can use Cyanogen 7 which I think is having support for similar hardware.

Can MeeGo 1.2 be ported for this Device?
It will be releasing this April.

lakehousetech said:
I've added the compatible devices I'm aware of to the first post. I may take advantage of CM scripting in the Gingerbread port. Will update when I have time. Here's a screenshot from the froyo firmware:
I've been using it for the past two days without any issues. I borrowed a SIM card from a friend today to test the data connectivity and call function. Both work flawlessly. The battery life isn't as good with the CPU overclocked, but it's worth it for the extra boost of performance.
Click to expand...
Click to collapse
Looks good.
But I prefer Android with its vanilla looks.
Can LCD density be used with this Tablet? does it work?
Please check that out.

Nice to see someone finally making a custom ROM for this device. Would be nice to have something like HyperDroidGBX for the HD2 using AOSP, Redux, CyanogenMod.... that's one hell of a nice piece of Gingerbread.
Hopefully the Viewpad 7 will get its own sub-forum and your ROM will be the first in it.
Cheers!
Cyko

harishgayatri said:
Can MeeGo 1.2 be ported for this Device?
Click to expand...
Click to collapse
I don't know enough about MeeGo to comment, but I imagine it is possible...just not sure how feasible or worthwhile it would be to port it.
harishgayatri said:
Can LCD density be used with this Tablet? does it work?
Click to expand...
Click to collapse
Yes LCD density can be modified and it works.
cyko said:
Hopefully the Viewpad 7 will get its own sub-forum
Click to expand...
Click to collapse
I think if there's enough community interest XDA may create a dedicated forum for these devices. We'll see.

Thank you for your work. On the Russian forum owners viewpad 7 Your beginnings of this work has generated enormous interest. Would you in their versions of the firmware to include more locations? Good luck in your work. Sorry for the English.

sanata said:
Thank you for your work. On the Russian forum owners viewpad 7 Your beginnings of this work has generated enormous interest. Would you in their versions of the firmware to include more locations? Good luck in your work. Sorry for the English.
Click to expand...
Click to collapse
Adding a Russian keyboard and locales would not be difficult if you know of another ROM that is using them in Froyo, or perhaps someone has them on a repo somewhere?

Great to see this!
I just bought a Viewpad for my wife, so this is perfect!

smnc said:
Great to see this!
I just bought a Viewpad for my wife, so this is perfect!
Click to expand...
Click to collapse
Glad I could help! Let me know if you have any suggestions for future changes.

lakehousetech said:
Viewpad 7a 'Enhanced' (RC1)
Viewpad 7a is a quick and dirty modification of the stock firmware from Viewsonic. This should be a decent alternative to the stock image, with improved performance and appearance.
Highlights:
- Removed the 'Welcome' logo and replaced with stock android boot animation.
- Replaced stock boot image with overclocked version: Credit goes to TJ Style @ Modaco.
- Minor framework modifications (got rid of annoying white status bar, and misc images).
- All packaged applications remain, but I will add or remove any upon request.
- Enabled hardware acceleration.
Notes:
- Firmware should work with compatible devices such as: Cherry Mobile Superion, Commtiva Linx N700, Olivepad VT-100, Spice MI700, and Camangi FM600....but I do not have these devices, so I cannot verify. As always make a backup before installing any custom firmwares.
Known Issues:
- You may receive an error from Swype upon initial use to the effect that 'it's not meant for this firmware and may be limited'. I haven't had any issues since seeing this, and have disregarded it for the time being.
****************************************************************************************************
I'm currently working on a Vanilla AOSP port of Gingerbread for this device, and this will be the main focus of my effort. I will try my best to answer any bug reports or requests for changes to this firmware, but won't make any promises.
As always a big thanks to everyone in the Android community that shares they're knowledge and support.
To install this firmware use ClockworkMod to flash the zip file. (I use version 2.5.1.2). Information on rooting and installing an alternative recovery partition is available here.
DISCLAIMER: I cannot be held liable for anything you do to your Viewpad 7 (or equivalent device). Make sure you are comfortable with recovery tools, such as ClockworkMod, before proceeding.
Download Link:
http://www.mediafire.com/?8plz5l9td3swith
Click to expand...
Click to collapse
I have clockworkmod recovery installed, works, and overclock boot.img installed works too.
My VIEWPAD 7 has still stock ROM with Chinese handwriting touch, if I flash this custom ROM, do I loss Chinese handwriting function ?
Does all wifi, bluetooth, GPS, 3G network, multi-touch remain the same ?
Also, I am looking for App2SD script, to extend my internal /data/apps -> mSD card (ext2/3/4) paritition too.
thanks, cheers
James

keijames said:
I have clockworkmod recovery installed, works, and overclock boot.img installed works too.
My VIEWPAD 7 has still stock ROM with Chinese handwriting touch, if I flash this custom ROM, do I loss Chinese handwriting function ?
Does all wifi, bluetooth, GPS, 3G network, multi-touch remain the same ?
Also, I am looking for App2SD script, to extend my internal /data/apps -> mSD card (ext2/3/4) paritition too.
thanks, cheers
James
Click to expand...
Click to collapse
I've done some tricks used a symbolic link for moved /data/dalvik-cache to /cache I will free up a lot of space in /data
Also the /cache partition is so huge. Is there any method to re-partition it?

TO: mp9_sit
This is good news, can you share your steps pls.
thanks
James

Sure, I will prepare some steps and open a new thread within this 2 days
Update: Already posted http://forum.xda-developers.com/showthread.php?p=12742585

Flashed successfully on my Wellcom A800 WePAD, Thailand model. Works really fast! Thank you so much!

lakehousetech said:
Viewpad 7a 'Enhanced' (RC1)
Viewpad 7a is a quick and dirty modification of the stock firmware from Viewsonic. This should be a decent alternative to the stock image, with improved performance and appearance.
Highlights:
- Removed the 'Welcome' logo and replaced with stock android boot animation.
- Replaced stock boot image with overclocked version: Credit goes to TJ Style @ Modaco.
- Minor framework modifications (got rid of annoying white status bar, and misc images).
- All packaged applications remain, but I will add or remove any upon request.
- Enabled hardware acceleration.
Notes:
- Firmware should work with compatible devices such as: Cherry Mobile Superion, Commtiva Linx N700, Olivepad VT-100, Spice MI700, and Camangi FM600....but I do not have these devices, so I cannot verify. As always make a backup before installing any custom firmwares.
Known Issues:
- You may receive an error from Swype upon initial use to the effect that 'it's not meant for this firmware and may be limited'. I haven't had any issues since seeing this, and have disregarded it for the time being.
****************************************************************************************************
I'm currently working on a Vanilla AOSP port of Gingerbread for this device, and this will be the main focus of my effort. I will try my best to answer any bug reports or requests for changes to this firmware, but won't make any promises.
As always a big thanks to everyone in the Android community that shares they're knowledge and support.
To install this firmware use ClockworkMod to flash the zip file. (I use version 2.5.1.2). Information on rooting and installing an alternative recovery partition is available here.
DISCLAIMER: I cannot be held liable for anything you do to your Viewpad 7 (or equivalent device). Make sure you are comfortable with recovery tools, such as ClockworkMod, before proceeding.
Download Link:
http://www.mediafire.com/?8plz5l9td3swith
Click to expand...
Click to collapse
I order a viewpad 7 from amazon on saturday. I had some concern about it and was wondering if I made the right choice. Now that I see that you are working on increasing its performance, I feel comfortable with my choice now.
I install gappinstaller v5 on a archos 70 and 101 with no problem by following the step by step direction. I dont have my viewpad 7 as yet but I hope the installation goes smoothly. I donate

I flashed it to a WellcoM A800 and the GSM radio doesn't work anymore. Whatever I do it indicates that I'm in airplane mode. I tried with three different SIM cards with the same result.
Please advise...
Thanks

lakehousetech said:
Glad I could help! Let me know if you have any suggestions for future changes.
Click to expand...
Click to collapse
The ViewPad finally arrived this morning. Got it all rooted, CWM'd and the ROM installed.
Nice work!
The wife will love it when she gets home tonight!
I'll definately let you know if I come up with any suggestions.
Well, one suggestion now:
move all the non-essential apps from system to data so they're easily removable.
Actually I can do that myself in a little bit...
Looking forward to Gingerbread!
Thanks again!

Install custom ROM on Honor Note 10...

Hi guys,
Trying to get this device to get a little support here are my experiences that I would like to share so far.
I have the Honor Note 10 8/128. It's unlocked. It has TWRP and it is rooted.
Now I would like to install something else than EMUI, maybe even Pie.
So here is what I was able to find out :
- it is possible to install the OpenKirin Project : Resurrection Remix and OmniRom and boot them ; but the fingerprint scanner doesn't work to wake device in Resurrection Remix (could not test in Omni ROM : I'll do that later tonight) ;
- it is possible to boot from at least one custom ROM made for "berkeley" (Honor View 10). And there, everything works... But of course, really few customization. Also, I was able to find out that, as soon as I install an AOSP based ROM, rebooting into TWRP fails : TWRP remains stuck at "splash" screen...
So I think it's really close to being able to run a s custom AOSP based ROM on the Honor Note 10, but that would require someone with a little more dev skills than I have to look into that
Anyone with such skills around here ? It would be really great to be able to have the Honor Note 10 running Resurrection Remix (Oreo) or Havoc (Pie)...
Regards.

NexusPenguin said:
Hi guys,
Trying to get this device to get a little support here are my experiences that I would like to share so far.
I have the Honor Note 10 8/128. It's unlocked. It has TWRP and it is rooted.
Now I would like to install something else than EMUI, maybe even Pie.
So here is what I was able to find out :
- it is possible to install the OpenKirin Project : Resurrection Remix and OmniRom and boot them ; but the fingerprint scanner doesn't work to wake device in Resurrection Remix (could not test in Omni ROM : I'll do that later tonight) ;
- it is possible to boot from at least one custom ROM made for "berkeley" (Honor View 10). And there, everything works... But of course, really few customization. Also, I was able to find out that, as soon as I install an AOSP based ROM, rebooting into TWRP fails : TWRP remains stuck at "splash" screen...
So I think it's really close to being able to run a s custom AOSP based ROM on the Honor Note 10, but that would require someone with a little more dev skills than I have to look into that
Anyone with such skills around here ? It would be really great to be able to have the Honor Note 10 running Resurrection Remix (Oreo) or Havoc (Pie)...
Regards.
Click to expand...
Click to collapse
Hello
i thinks i can remember u on mi5s+ thread...
hope u can make custom rom on this note10...
Regards
:good:

NexusPenguin said:
Hi guys,
Trying to get this device to get a little support here are my experiences that I would like to share so far.
I have the Honor Note 10 8/128. It's unlocked. It has TWRP and it is rooted.
Now I would like to install something else than EMUI, maybe even Pie.
So here is what I was able to find out :
- it is possible to install the OpenKirin Project : Resurrection Remix and OmniRom and boot them ; but the fingerprint scanner doesn't work to wake device in Resurrection Remix (could not test in Omni ROM : I'll do that later tonight) ;
- it is possible to boot from at least one custom ROM made for "berkeley" (Honor View 10). And there, everything works... But of course, really few customization. Also, I was able to find out that, as soon as I install an AOSP based ROM, rebooting into TWRP fails : TWRP remains stuck at "splash" screen...
So I think it's really close to being able to run a s custom AOSP based ROM on the Honor Note 10, but that would require someone with a little more dev skills than I have to look into that
Anyone with such skills around here ? It would be really great to be able to have the Honor Note 10 running Resurrection Remix (Oreo) or Havoc (Pie)...
Regards.
Click to expand...
Click to collapse
Sorry but you do not just flash ROMs for other phones that can go wrong

Hi guys,
Well, you're obviously not interested in this...
You're happy with EMUI, so be it...
Me, I don't really like it
I really would like AOSP based which I am accustomed to.
And despite what is written here, I would like to stress that :
- when Treble was announced by Google, Huawei/Honor praised themselves to offer fully compliant devices with Treble ;
- Honor View 10 and Honor Note 10 share the same hardware, excet for display... and thus I have been able to boot PixelExperience for berleley (Honor View 10) into Note 10...
But of course, if you'd ratehr stick to EMUI and would like me to stop sharing my thoughts here, I will do.
Regards.

I haven't unlock my phone yet, but flashing GSI via fastboot seems to be the safest way.

Custom ROMs from honor view 10 work well on this phone. Currently using pixel experience and it is running perfectly

kev15059 said:
Custom ROMs from honor view 10 work well on this phone. Currently using pixel experience and it is running perfectly
Click to expand...
Click to collapse
Oh really.

Ressurection from openkirin project also runs well

kev15059 said:
Custom ROMs from honor view 10 work well on this phone. Currently using pixel experience and it is running perfectly
Click to expand...
Click to collapse
Just wondering any issue you encounter so far? I am interested to flash it as well

kev15059 said:
Custom ROMs from honor view 10 work well on this phone. Currently using pixel experience and it is running perfectly
Click to expand...
Click to collapse
Hi,
Yes, we share the same experience.
But you will notice that this channel is dead : no developer support for this device and custom ROM allergic people participating here
So basically : no interest from manufacturer ; no interest from developer ; no interest from users...
I switched to Xiaomi mi Max 3 : no real custom ROM there, but at least some interest from community and manufacturer who keeps updating the ROM.
Regards.

kev15059 said:
Custom ROMs from honor view 10 work well on this phone. Currently using pixel experience and it is running perfectly
Click to expand...
Click to collapse
Have you tried the BLISS rom from the same forum? With the holiday time off coming up I'm going to buy my unlock code and give roms a chance.

kev15059 said:
Custom ROMs from honor view 10 work well on this phone. Currently using pixel experience and it is running perfectly
Click to expand...
Click to collapse
can you please make a thread with step by step guide, how to install Pixel Experience ROM in Honor Note 10.

Thanks for all the info guys. I an looking to get this phone and install any of the ROMs from openkirin.
Is it a bad decision ? If I install the ROMs many for view 10, will I be able to update them OTA ?
Please comment/advise.
Thanks in Advance.

NexusPenguin said:
as soon as I install an AOSP based ROM, rebooting into TWRP fails : TWRP remains stuck at "splash" screen...
Regards.
Click to expand...
Click to collapse
Have we devised a work around for "Stuck at TWRP Splash"? Flashed Bliss from view 10 and wanted to look at Pixel Exp. but can not re-enter TWRP.
And to those of you running Pixel Exp. without issue, have you tried going back into TWRP?

papashex said:
Have we devised a work around for "Stuck at TWRP Splash"? Flashed Bliss from view 10 and wanted to look at Pixel Exp. but can not re-enter TWRP.
And to those of you running Pixel Exp. without issue, have you tried going back into TWRP?
Click to expand...
Click to collapse
Hi,
Can't say as I don't run the device anymore...
No interest from manufacturer.
No interest from developers.
No interest in development from the community here.
No interest for buyers.
My Honor Note 10 8/128 in Black is on an ad since about 40 days, and not a single reply even though I think I have positioned it fairly as a price
This is probably the best phone I've had, but the worst buy I've made for the aforementioned reasons...
Blame Honor. This was my first attempt. And will be the last. And I will of course spread the news all around me to as much people as I can.
It's funny : when I look around, my students who all had Honor or Huawei (apart from iPhones of course and of Samsung also) now more and more have OnePlus and Xiaomi devices...
No more Honor ; no more Huawei.
And they're absolutely not geeks by any means...
As a wild guess I'd say that they rely on geek friends who tell them not to buy Honor anymore.
And so I'll join that anti-Honor/Huawei league unless they change their policies about unlocking the bootloader.
And I am saying this because Huawei presented themselves as the best student in class for Treble support when it was announced.
Where are we now ?
Another promise not kept...
No support for Treble, no updates after 6 months device is released, no source code given, no unlocking of bootloader...
They can just use their device as suppositories.
Hope that will cure them from that closed source disease that is spreading more and more...
Regards.

Kangvip ROMs
https://cn.club.vmall.com/thread-18032315-1-1.html
https://cn.club.vmall.com/thread-18032100-1-1.html
https://utka.su/X0inb
Others Kangvip ROMs https://clck.ru/G6Tqb

NexusPenguin said:
Hi,
Can't say as I don't run the device anymore...
No interest from manufacturer.
No interest from developers.
No interest in development from the community here.
No interest for buyers.
My Honor Note 10 8/128 in Black is on an ad since about 40 days, and not a single reply even though I think I have positioned it fairly as a price
This is probably the best phone I've had, but the worst buy I've made for the aforementioned reasons...
Blame Honor. This was my first attempt. And will be the last. And I will of course spread the news all around me to as much people as I can.
It's funny : when I look around, my students who all had Honor or Huawei (apart from iPhones of course and of Samsung also) now more and more have OnePlus and Xiaomi devices...
No more Honor ; no more Huawei.
And they're absolutely not geeks by any means...
As a wild guess I'd say that they rely on geek friends who tell them not to buy Honor anymore.
And so I'll join that anti-Honor/Huawei league unless they change their policies about unlocking the bootloader.
And I am saying this because Huawei presented themselves as the best student in class for Treble support when it was announced.
Where are we now ?
Another promise not kept...
No support for Treble, no updates after 6 months device is released, no source code given, no unlocking of bootloader...
They can just use their device as suppositories.
Hope that will cure them from that closed source disease that is spreading more and more...
Regards.
Click to expand...
Click to collapse
???
5-6 Updates in 3 Months.
You can unlock the Bootloader.
Treble are support.
where is the problem?

letschky said:
???
5-6 Updates in 3 Months.
You can unlock the Bootloader.
Treble are support.
where is the problem?
Click to expand...
Click to collapse
Hi,
Sell those fairy tales to somebody else please...
5-6 updates in 3 months ? Probably. i've witnessed 2 updates.
And one of those forbids to change the default launcher... Is that an update or a severe regression ?
You can unlock the bootloader ?
Well, I've tried to boot the device in fastboot mode and to type "fastboot oem-unlock"... Guess what ? It did nothing...
To unlock this device, I had to go to an obscure website from probably a hacker/retailer that does it "grey", to pay 25 dollars and to wait for an unlock code...
All other phones I've had so far (Motorola, Sony, OnePlus, Xiaomi)... at worst you had to ask for an unlock code on the manufacturer's website and got it free !
Treble support ?
Come on... Did you even tried to install GSI to this device and had it working properly with no severe battery drain ?
Well, as you know from my other posts : I've tried it all... Even to flash Berkeley (Honor View 10) custom Rom's.
And when I was luck, the device booted...
But even then a lot of things weren't working properly : BT, display brightness...
And look at the facts :
- how much devs working on this device ? 0
- how many custom ROMs fro this device ? 0
- how many TWRP for this device ? 1 (unofficial)
- how many custom kernels for this device ? 0
- hon many posts about development for this device in the past week ? 2
So all in all how's support for this device from manufacturer or community ?
- community : 0
- manufacturer : -1 (for regressive releases of EMUI !).
Yopu can answer... You're the only one active on this channel... Truth is : no one wants this device anymore.
It made high promises and did not deliver...
Regards.

Syzran said:
Kangvip ROMs
https://cn.club.vmall.com/thread-18032315-1-1.html
https://cn.club.vmall.com/thread-18032100-1-1.html
https://utka.su/X0inb
Others Kangvip ROMs https://utka.su/SUmdS
Click to expand...
Click to collapse
I could not download KangVip rom from this site. Is there another link that I can download. Thanks.

NexusPenguin said:
Hi,
Sell those fairy tales to somebody else please...
5-6 updates in 3 months ? Probably. i've witnessed 2 updates.
And one of those forbids to change the default launcher... Is that an update or a severe regression ?
You can unlock the bootloader ?
Well, I've tried to boot the device in fastboot mode and to type "fastboot oem-unlock"... Guess what ? It did nothing...
To unlock this device, I had to go to an obscure website from probably a hacker/retailer that does it "grey", to pay 25 dollars and to wait for an unlock code...
All other phones I've had so far (Motorola, Sony, OnePlus, Xiaomi)... at worst you had to ask for an unlock code on the manufacturer's website and got it free !
Treble support ?
Come on... Did you even tried to install GSI to this device and had it working properly with no severe battery drain ?
Well, as you know from my other posts : I've tried it all... Even to flash Berkeley (Honor View 10) custom Rom's.
And when I was luck, the device booted...
But even then a lot of things weren't working properly : BT, display brightness...
And look at the facts :
- how much devs working on this device ? 0
- how many custom ROMs fro this device ? 0
- how many TWRP for this device ? 1 (unofficial)
- how many custom kernels for this device ? 0
- hon many posts about development for this device in the past week ? 2
So all in all how's support for this device from manufacturer or community ?
- community : 0
- manufacturer : -1 (for regressive releases of EMUI !).
Yopu can answer... You're the only one active on this channel... Truth is : no one wants this device anymore.
It made high promises and did not deliver...
Regards.
Click to expand...
Click to collapse
My Answer:
You can see that you have no idea about the whole thing.
You have to buy a Unlock Code!I paid $ 22 and it was worth it!
HN10 is support Treble,but you have to wait for a Rom for this Device.
I buy with firmware 108,next update 120 next 123 next 125,next 132 next 132,next 151 and the latest 158!
If you have no idea, you should rather leave it!

Best ROMS for my device Huawei p20 lite(ANE-LX1 - Kirin SoC)?

Hi all,
I have unlocked my device and is currently running LineageOS 16 from OpenKirin. There are a few things which does not work, like the camera app that comes with the OS as well as the notch, where icons goes beyond the notch. Someone suggested I try the OpenKirin Rom and that is how I got that specific ROM on my device.
I was wondering are there maybe other ROMS for this device? Like the one's mentioned in the article below?
https://www.getdroidtips.com/best-custom-rom-huawei-p20-lite/
It took me a long while to get everything running on this device, Magisk and EdXposed. So I just don't want to go and wipe my OS just to try 4 ROMS that does not work. Sure you have app backup for that but it would mean doing everything over almost on the device.
Any advice would be greatly appreciated. Also I am rather new to custom ROMS so please bear with me!

MayhemIam said:
Hi all,
I have unlocked my device and is currently running LineageOS 16 from OpenKirin. There are a few things which does not work, like the camera app that comes with the OS as well as the notch, where icons goes beyond the notch. Someone suggested I try the OpenKirin Rom and that is how I got that specific ROM on my device.
I was wondering are there maybe other ROMS for this device? Like the one's mentioned in the article below?
https://www.getdroidtips.com/best-custom-rom-huawei-p20-lite/
It took me a long while to get everything running on this device, Magisk and EdXposed. So I just don't want to go and wipe my OS just to try 4 ROMS that does not work. Sure you have app backup for that but it would mean doing everything over almost on the device.
Any advice would be greatly appreciated. Also I am rather new to custom ROMS so please bear with me!
Click to expand...
Click to collapse
I don't know bro but I have the same question too. U installed one of the listed roms from the link you posted?

MayhemIam said:
Hi all,
I have unlocked my device and is currently running LineageOS 16 from OpenKirin. There are a few things which does not work, like the camera app that comes with the OS as well as the notch, where icons goes beyond the notch. Someone suggested I try the OpenKirin Rom and that is how I got that specific ROM on my device.
I was wondering are there maybe other ROMS for this device? Like the one's mentioned in the article below?
https://www.getdroidtips.com/best-custom-rom-huawei-p20-lite/
It took me a long while to get everything running on this device, Magisk and EdXposed. So I just don't want to go and wipe my OS just to try 4 ROMS that does not work. Sure you have app backup for that but it would mean doing everything over almost on the device.
Any advice would be greatly appreciated. Also I am rather new to custom ROMS so please bear with me!
Click to expand...
Click to collapse
There is nothing like perfect Custom ROM. It is highly dependent upon the requirement of the user and his likes/dislikes. Every ROM has its importance and downsides. You can try flashing multiple ROMs to find the ROM which is suitable and best for you. There is no Custom ROM that is 100% bug free (it depends, among other things, on model, FW built number etc. etc.).
If you don’t prefer EMUI,* choose Havoc OS , AOSP Extended or LineageOS.
If you "hate" Google and Google's bloatware (like me ) only, you can simply rebrand your phone to chinese Nova 3e (among other things, better battery life, lower data consumption etc.)
Or, choose Custom ROM based on Stock with KangVip settings ( to get away from GAPPS) , stable enough to be used as your daily driver.
Availability of custom ROMs for Kirin devices is scarce.

Are you bored in quarantine?
Ion
ion-2.5b-arm64-ab-gapps-Lite-2.1 GB
Android 10.0.0 https://drive.google.com/file/d/1q3dgQChf7ltB5h9QzvqXuGCeijUUKVG-/view
Colt OS
https://sourceforge.net/projects/am...ial-20200103-arm64-ab-vanilla.img.xz/download
Havoc OS
https://sourceforge.net/projects/ex...0-20191225-ARM64AB-Unofficial.img.xz/download
CR Droid (EMUI 8?)
https://forum.xda-developers.com/pr...ice-development/official-crdroid-4-4-t3813104
DOT OS (EMUI 8?)
https://sourceforge.net/projects/dotos-2-x/files/dotGSI/09062018/
AOSP
https://github.com/phhusson/treble_experimentations/releases/tag/v112
AOSP-2
https://github.com/phhusson/treble_experimentations/releases/tag/v109
EvolutionX (similar to Pixel Experience)
https://androidfilehost.com/?fid=1395089523397918976
Resurrection Remix O (EMUI 8)
https://forum.xda-developers.com/pr...pment/gsi-resurrection-remix-o-6-1-0-t3811299

n.sim said:
I don't know bro but I have the same question too. U installed one of the listed roms from the link you posted?
Click to expand...
Click to collapse
Hi,
No i have not tried one of the recommended in that list i provided. It took me a very long time to get the phone unlocked! Then more bricks, soft and hard through the process :crying:
Magisk was not as hard to install but EdXposed was, and I also got my device stuck on a boot loop trying to get EdXposed to run. So yeah I took me a while to get it working.

-Alf- said:
Are you bored in quarantine?
Click to expand...
Click to collapse
hehe well i'm just picky in getting the device to work right! Thank you for the detailed response Alf!

-Alf- said:
Are you bored in quarantine?
Ion
ion-2.5b-arm64-ab-gapps-Lite-2.1 GB
Android 10.0.0 https://drive.google.com/file/d/1q3dgQChf7ltB5h9QzvqXuGCeijUUKVG-/view
Colt OS
https://sourceforge.net/projects/am...ial-20200103-arm64-ab-vanilla.img.xz/download
Havoc OS
https://sourceforge.net/projects/ex...0-20191225-ARM64AB-Unofficial.img.xz/download
CR Droid (EMUI 8?)
https://forum.xda-developers.com/pr...ice-development/official-crdroid-4-4-t3813104
DOT OS (EMUI 8?)
https://sourceforge.net/projects/dotos-2-x/files/dotGSI/09062018/
AOSP
https://github.com/phhusson/treble_experimentations/releases/tag/v112
AOSP-2
https://github.com/phhusson/treble_experimentations/releases/tag/v109
EvolutionX (similar to Pixel Experience)
https://androidfilehost.com/?fid=1395089523397918976
Resurrection Remix O (EMUI 8)
https://forum.xda-developers.com/pr...pment/gsi-resurrection-remix-o-6-1-0-t3811299
Click to expand...
Click to collapse
If I currently have LineageOS 16 (Aug 2020 ver) can I use the AB partition? I presume so because the Android version currently is 9. I am looking to try HavocOS.
Thank you Alf man you have helped me a lot with all my questions!

MayhemIam said:
If I currently have LineageOS 16 (Aug 2020 ver) can I use the AB partition?
Click to expand...
Click to collapse
AB or A-only depend on EMUI version : 9.1 = AB, 8.0 = A-only.
Good luck!

n.sim said:
I don't know bro but I have the same question too. U installed one of the listed roms from the link you posted?
Click to expand...
Click to collapse
Don't bother trying any one of those ROMs listed in that post. I wasted a whole day trying to flash a ROM specified by that website. Look specifically for ROMs on XDA website.
I get more help here, and it has been tested already on our devices.

MayhemIam said:
Don't bother trying any one of those ROMs listed in that post. I wasted a whole day trying to flash a ROM specified by that website. Look specifically for ROMs on XDA website.
I get more help here, and it has been tested already on our devices.
Click to expand...
Click to collapse
I flashed treble gsi rooted and with gapps on my ane-lx1 and everything works except fingerprint unlock after first reboot. But fingerprint gestures still working

I recommend gsi ...

I am working on it, the inverse ingeniery is the way, I think

Miuimi 12 sucks....

Hi guys,
this is my first experience report about my new Poco X3 NFC with Miumi 12 after 14 days in use....
To explain: 2 years ago i got my first xiaomi redmi note 6 pro global. This machine is a fine thing, but i never liked the miui surface. So i decided to unlock and root the phone and use a custom rom. This was the very best decision for me.
So far, so good... At least i bougth my new Poco X3 NFC and i got 14 days ago. I heard a lot of "good" things about the new Miui 12, so that was one reason for me to catch this deal....
After nearby 14 days using this phone with this original surface Miui 12 i can say: it sucks, nothing else but the original apps are running smooth. It is nearly impossible to run an alternative launcher, really nothing runs flawless on this terrible, awful surface! The simplest things like "notification badges" etc. are not present, they still are not in function...
Ok, Miui "spend" a launcher: Poco Launcher. Hmm, nearby, but (for me) lightyears away from any kind of personalization. Change icons? Runs partially... Want to unlink the fu..... ring- and notification sounds? Misrepresented!!! This (for me) confusing settings menu? There is no better thing than a clean android system or custom rom!
The next annoying crap is the annoying advertising - i spend a "little" time to "destroy" this really sucking "feature".....
Oh, before i forgot: i tried to run the launchair launcher, ruthless launcher, nova launcher, microsoft launcher and at least hyperion launcher. With all this launchers it is on my phone totally impossible to run all features - on every other phone with custom rom or original they run like hell!
The one and only way to operate this phone "fine and smoothly" is this: leave it in its original condition! But who wants this? Personalization? Inadequate....
But yes, there are two things they are fine: the energy options and the camera app. But thats it for me.
So, this is my experience after 14 days and the next thing i will do is unlock the bootloader, install a recovery systen (maybe twrp or orange fox) and root the phone with magisk. With this solution i hope to improve some things - i 'll keep testing this
Best wishes and greets

I'm using Nova Launcher on all devices since a couple of years. Mui has the habit of preventing background tasks and autostart(never saw this before) for all apps except Xiaomi and Google ones and probably a few other. Autostart, notifications and widgets i only need for a handful of apps(including the launcher), and none of these worked out of the box.
But all relevant options are bundled in the app's context menu, no scrolling thru huge lists including all the system apps. Simply allow autostart, disable powersaving and give the app more or less all access rights. Running pretty well now. It's only the most bloated phone i ever had, but also the most powerful, so thats not an issue at present.

Hi lecorbusier,
thanks for your answer.
With your sentence >It's only the most bloated phone i ever had, but also the most powerful< your totally right
Yesterday i unlocked my X3, flashed TWRP - and wow: System destroyed....
Turned to fastboot, flashed OrangeFox, puh, it 's not broken....
Flashed Magisk also and today i will see what happen....

Lmao, who told you that MIUI is a good thing. It's ok, but compared to custom ROM it sucks.
If you want to try custom ROM, ArrowOS is the best optimized custom ROM + Void custom kernel If you want maximum fluidity/smoothness as it's optimized for minimum latency and jank. Battery life is still good in my usage, maybe 2 hours less maximum, but it's worth it. With stock kernel, SOT is a bit better.
ArrowOS gets improvements every day on ROM side with fixes & improvements + occasionally improvements & fixes to the device side.
I tried 5 other custom ROMs (crDroid, Resurrection Remix, LineageOS 17.1, CorvusOS, NitrogenOS) and that's my experience.
Everything works except fast charging information with Xiaomi charger (all custom ROMs have this issue) & Miracast (which I'm not sure if it works or not since I never used it).
So all in all, just flash custom ROM in this one too!

Devil's advocate here ( ), Xiaomi.eu with updated firmware and Stormbreaker kernel feels smooth as butter here -- but it takes some intensive tweaking.

Hi there, good morning from Germany
A short "update"....
After "repairing" (see 3 posts above) I've done the following:
Installed Lsposed (Magisk), installed CustoMIUIzer and started "playing" with the mass of settings in it....
What should I say: I'm pretty impressed.
Almost everything is going as hoped and does what it should! Till now I got no numbers on my notification badges, but this is a part I can live with.
That doesn't mean that i have changed my opinion about the MIUI-Surface, especially the terribly nested settings.... But with a bit of work you can establish a relatively well-running system that you can personalize according to your wishes.
So for the moment I'm pretty happy, but I'm still testing...
Ah, before i forget to mention: magisk and safetynet was another problem. I have found a module that works (for me), look here
So, thats it for today, many greetings and happy easter

Hello everyone,
here 's another short update for miui....
The good news first: it runs, Ruthless Launcher is working, original camera app is fine, other things: see my post above...
That 's it!
Unlock by (or with) bluetooth??? Fail! It seems that Xiaomi only supports its own devices - what a crap.... I clearly miss this function.
I stick to my opinion: miui sucks....
The only point that keeps me from installing a custom rom is the camera app (at least for the moment)...
My conclusion: to use all possibilities of this device you "must" use a custom rom, otherwise you have to live with the restrictions

thueringer said:
The only point that keeps me from installing a custom rom is the camera app (at least for the moment)...
Click to expand...
Click to collapse
My main reason to keep Xiaomi.eu, too. When LOS becomes official, I'll brace myself for intensive testing of camera alternatives...

for me, personally, i dont like miui as well. luckily we have a bunch of custom roms out there and even i found a better rom for my daily use, i still try flashing some rom to experience some other features. tho, at the end of the day, i end up using my rom that i am using daily. if you want the rom with alot of customization, have a good BB, and have miui camera, i suggest to use Ancient OS

Hi all together
@dahrel22: thanks for your tip, it seems like this is what i was looking for...
I think I'll test it out, I can't do more than break it
Have a nice Sunday, many greetings from here...

thueringer said:
Hi all together
@dahrel22: thanks for your tip, it seems like this is what i was looking for...
I think I'll test it out, I can't do more than break it
Have a nice Sunday, many greetings from here...
Click to expand...
Click to collapse
yes bro you better try it. im currently using the old build which is the miui verdor based. the new build comes with oss vendor but i think im not ready to flash it. i having trouble keeping my phone decrypted from oss vendor based roms. so i'll still be using the old build.

After the updates my Poco x3 NFC restarts in stand-by mode or when I'm using whatsapp, suddenly the screen goes to black..and then back to the homescreen... :/
Does anybody tried a custom rom? I would like to give a try.

Hello to everybody,
here 's my newest experience with "Miui-machine"...
I tried the tip from dahrel22 (see 4 posts above) und flashed Ancient OS 5.3 - I did everything according to the description, but in the end I had an encrypted partition on my phone....
Yesterday I had the great idea to cleam my device up und flash it again...
What can i say: it was a horrible trip
Like before I 've done everything as described - but it ends with a lot of issues like "no root" and "no system" directory, unable to mount system partion and so on and so on... This action cost me a lot of annoyance
(I tried this with two custom roms: Ancient OS 5.4 and Evolution X).
I was then able to revive the device using fastboot and the mi flashtool.
The Mi-Flashtool also ended with an error, but the system works - for whatever reason???
So at the moment I'm "driving" this damn Miui again and I'm really pissed off!
Maybe someone from you has a "smooth" idea to solve my problem??
Many greetings and thanks

thueringer said:
Hello to everybody,
here 's my newest experience with "Miui-machine"...
I tried the tip from dahrel22 (see 4 posts above) und flashed Ancient OS 5.3 - I did everything according to the description, but in the end I had an encrypted partition on my phone....
Yesterday I had the great idea to cleam my device up und flash it again...
What can i say: it was a horrible trip
Like before I 've done everything as described - but it ends with a lot of issues like "no root" and "no system" directory, unable to mount system partion and so on and so on... This action cost me a lot of annoyance
(I tried this with two custom roms: Ancient OS 5.4 and Evolution X).
I was then able to revive the device using fastboot and the mi flashtool.
The Mi-Flashtool also ended with an error, but the system works - for whatever reason???
So at the moment I'm "driving" this damn Miui again and I'm really pissed off!
Maybe someone from you has a "smooth" idea to solve my problem??
Many greetings and thanks
Click to expand...
Click to collapse
im feel so sorry when i read your experience. maybe some confusion because 2 builds at the same version have different vendor based. both of them are comes with 5.3 but one comes with miui, one comes with oss. as i say i really have a hard time to keep my phone decrypted on oss when im using orange fox (now im in twrp but still no planning of flashing oss) if you flashed the old build, i mean the miui vendor based build, i think the outcome will be better.
what version of miui are you into right now?
edit: you know i feel bad for you as you need to do this "mi-flashtool" kind of stuff. next time, if you make mistake flashing something, i suggest just to flash miui rom again (miui eu will do) using recovery (i suggest twrp). i did that before many times and it never fails me.

dahrel22 said:
im feel so sorry when i read your experience. maybe some confusion because 2 builds at the same version have different vendor based. both of them are comes with 5.3 but one comes with miui, one comes with oss. as i say i really have a hard time to keep my phone decrypted on oss when im using orange fox (now im in twrp but still no planning of flashing oss) if you flashed the old build, i mean the miui vendor based build, i think the outcome will be better.
what version of miui are you into right now?
Click to expand...
Click to collapse
Hi dahrel, at the moment I 'm on Miui 12... I tried to flash with OF and TWRP.

thueringer said:
Hi dahrel, at the moment I 'm on Miui 12... I tried to flash with OF and TWRP.
Click to expand...
Click to collapse
with the newest miui 12.0.9 from xiaomi eu? have you flashed the decrypted vendor? then try to flash the oldest ancient 5.3, anyways, one more stable rom i used is PE+. the new anx cam 2.4 works pretty well.

dahrel22 said:
with the newest miui 12.0.9 from xiaomi eu? have you flashed the decrypted vendor
Click to expand...
Click to collapse
Hi dahrel22, I used the Miui 12.0.8 global. What do you mean with the decrypted vendor?
I don't know the PE+...

thueringer said:
Hi dahrel22, I used the Miui 12.0.8 global. What do you mean with the decrypted vendor?
I don't know the PE+...
Click to expand...
Click to collapse
oh i mean, you keep your phone decrypted?
i usually flash the unencrypted vendor so i dont have to flash dfe. you can find it from here.
12.0.8.0
[PATCH] Disable encryption for XIAOMI.EU ROM
disable data encryption, MLC nand write cycle is limited and encryption is make it worst how to : - download and unzip xiaomi.eu_multi_POCOX3NFC_V12.0.4.0.QJGMIXM_v12-10.zip - download and unzip vendor patch...
forum.xda-developers.com
and for 12.0.9.0
[PATCH] Disable encryption for XIAOMI.EU ROM
disable data encryption, MLC nand write cycle is limited and encryption is make it worst how to : - download and unzip xiaomi.eu_multi_POCOX3NFC_V12.0.4.0.QJGMIXM_v12-10.zip - download and unzip vendor patch...
forum.xda-developers.com
thanks to @inunxelex
which rom you want to flash now?

Hi dahrel, thank you very much for the links above
I 'm not sure which rom i 'll flash next time - maybe Ancient OS or Evolution...

are you following poco x3 updates on telegram? you can find alot of custom roms from there. some are those you cant find here.
POCO X3 | Updates
All about POCO X3 ROMs, Kernels, Guides, Mods, NEWS, everything. Stay up-to-date with us! Official Group: @PocoX3GlobalOfficial
t.me

[Curtana] Does flashing a custom ROM compel disabling force encryption?

First of all, I'm really sorry if this thread would turn out to be a dumb enquiry. I am new to intrinsically customising my phone and only have been using this device (Redmi Note 9S EEA Curtana, MIUI Global V11.0.4.0. QJWEUXM 4/64 GB) for 10 days. I've successfully installed root and TWRP on my phone after having thoroughly researched relevant information. The only thing is all my efforts regarding the removal of force encryption have so far failed. I'm inclined to install a custom ROM, e. g. LineageOs or Evolution X.
1. Is it a necessity to have encryption permanently disabled so that the flashing process proves viable? Currently, I'm only aware of a method which has its effect limited to the the period the phone is in recovery. It involves formatting data and then installing Magisk and thus I need to go through the set-up again. At the end of the operation, encryption is enabled again. I have no clue why. I've tested loads of no verity opt files, none of them worked in a proper way either.
2.Will installing a custom ROM eliminate root acces (since it performs a reinstallation targeting the entire system, let alone the patched boot image)?
3. In case something goes wrong, what's the correct procedure to return to the factory ROM? Is re-locking the bootloader a prerequisite? (See this guide https://c.mi.com/uk/miuidownload/detail?guide=2, for example. Notice how each of the stable MIUI releases there are marked with ★ next to them, meaning they're locked. I didn't quite grasp the message they were trying to convey with that explanation though.)
I'm conscious that's a lot to ask in a single thread, however, unlike myself, the majority of users here are supposedly tech enthusiast and probably have encountered similar difficulties on several occasions.
I hope that I've provided enough information and the thread has been named reasonably.
(Priority: detailed answers within a month would be great.)
Cheers,
Hsjaai

Just format data: twrp->wipe->format data write yes->reboot twrp and flash rom.
If you got error(red lignes reboot twrp and format again).
or
delete all your lockscreen security before flashing but to install a new rom you must format the data before.

Thanks for your quick response, honestly I didn't expect anyone to be this early to react.
As I've already mentioned, in TWRP there's a workaround for temporarily disabling encryption using the first method, the latter one doesn't seem to function as intended - that may be the case on newer devices, according to an article I've come across.
One last request. Could you please (briefly) answer my two other questions as well? How do I reinstall MIUI if something breaks down? Is the flashing apparatus provided by Xiaomi reliable?
I'll keep you updated on my progress,
Hsjaai

Hsjaai said:
Thanks for your quick response, honestly I didn't expect anyone to be this early to react.
As I've already mentioned, in TWRP there's a workaround for temporarily disabling encryption using the first method, the latter one doesn't seem to function as intended - that may be the case on newer devices, according to an article I've come across.
One last request. Could you please (briefly) answer my two other questions as well? How do I reinstall MIUI if something breaks down? Is the flashing apparatus provided by Xiaomi reliable?
I'll keep you updated on my progress,
Hsjaai
Click to expand...
Click to collapse
Use this tool who is reliable(if you follow the instructions). In all cases unroot before and reboot (if necessary).

NOSS8 said:
Use this tool who is reliable(if you follow the instructions). In all cases unroot before and reboot (if necessary).
Click to expand...
Click to collapse
Thank you so much once again for the help. What should I do if the worst-case scenario arised -essential parts of the file system got corrupted so that the phone wouldn't be capable of booting into system? Uninstall magisk via zip and then make use of the fastboot tool?

Hsjaai said:
Thank you so much once again for the help. What should I do if the worst-case scenario arised -essential parts of the file system got corrupted so that the phone wouldn't be capable of booting into system? Uninstall magisk via zip and then make use of the fastboot tool?
Click to expand...
Click to collapse
1)Normaly yes
2)Or with app(i prefer)

NOSS8 said:
2)Or with app(i prefer)
Click to expand...
Click to collapse
What did you mean by that exactly?
Besides, sorry for bothering you, it's just that I'm genuinely curious and don't want to mess up the process.

Hsjaai said:
What did you mean by that exactly?
Besides, sorry for bothering you, it's just that I'm genuinely curious and don't want to mess up the process.
Click to expand...
Click to collapse
With Magisk app

I'm still unsure about something. Will the custom ROM be installed without hassle if I unroot Magisk at the beginning (meanwhile leaving the custom recovery intact, of course)? No guide seems to deem having root installed as a prerequisite. If you answer that, I'm really embarking on the flashing process.

Hsjaai said:
I'm still unsure about something. Will the custom ROM be installed without hassle if I unroot Magisk at the beginning (meanwhile leaving the custom recovery intact, of course)? No guide seems to deem having root installed as a prerequisite. If you answer that, I'm really embarking on the flashing process.
Click to expand...
Click to collapse
Installing a custom rom (aosp or Miui) requires a data format (erases all data and creates a new partitions if necessary) which will remove root anyway, but sometimes root + twrp creates problems (can't mout the partitions) it is therefore to avoid this that I recommend you to unroot before.
In all cases (Aosp or custom Miui) magisk is installed last.
Which ROM do you want to install?

I'd like to install LineageOS first and see how compatible it is.
[ROM][UNOFFICIAL] LineageOS 17.1 for Redmi Note 9S
THERE IS AN OFFICIAL BUILD NOW, USE THAT INSTEAD! Note: this ROM is derived from LeddaZ's build. I will continue to update it until my 9s is on its last legs. Do not expect any features to be added. LineageOS is a free, community built...
forum.xda-developers.com
LineageOS With Android 11 For Redmi Note 9s/9 Pro/9 Pro Max/Poco M2 Pro (Miatoll) | The Custom Rom
November 20, 2021 Lineage OS 18.1 | OFFICIAL ~ Miatoll Android: 11 Build Date: 19.11.2021 Maintainer: @dereference
thecustomrom.com
The latter is relatively new, although I doubt that site would be credible.

Hsjaai said:
I'd like to install LineageOS first and see how compatible it is.
[ROM][UNOFFICIAL] LineageOS 17.1 for Redmi Note 9S
THERE IS AN OFFICIAL BUILD NOW, USE THAT INSTEAD! Note: this ROM is derived from LeddaZ's build. I will continue to update it until my 9s is on its last legs. Do not expect any features to be added. LineageOS is a free, community built...
forum.xda-developers.com
LineageOS With Android 11 For Redmi Note 9s/9 Pro/9 Pro Max/Poco M2 Pro (Miatoll) | The Custom Rom
November 20, 2021 Lineage OS 18.1 | OFFICIAL ~ Miatoll Android: 11 Build Date: 19.11.2021 Maintainer: @dereference
thecustomrom.com
The latter is relatively new, although I doubt that site would be credible.
Click to expand...
Click to collapse
Umm... I've taken my word back, they're XDA developers, not just some random dudes in the internet. Still, you can't be too careful.

Deleted

Hsjaai said:
Umm... I've taken my word back, they're XDA developers, not just some random dudes in the internet. Still, you can't be too careful.
Click to expand...
Click to collapse
Lineage 17 for Curtana
Lineage 18 for Miatoll
CherishOS https://sourceforge.net/projects/cherish-os/files/device/curtana/
More options than lineage.

NOSS8 said:
Lineage 17 for Curtana
Lineage 18 for Miatoll
CherishOS https://sourceforge.net/projects/cherish-os/files/device/curtana/
More options than lineage.
Click to expand...
Click to collapse
What device is Miatoll ?
Hello guys ! For some days or weeks, I see a new codename : Miatoll. I looked and search but I don't find what device is it. Can you helo me ? I wonder if I can flash my phone with a Miatoll Rom
forum.xda-developers.com
Miatoll ROMs are supposed to be compatible with Curtana if I haven't got something wrong... What's the deal with that?
I may consider flashing CherishOS instead, seems neat and the monthly updates appeal to me.

Hsjaai said:
What device is Miatoll ?
Hello guys ! For some days or weeks, I see a new codename : Miatoll. I looked and search but I don't find what device is it. Can you helo me ? I wonder if I can flash my phone with a Miatoll Rom
forum.xda-developers.com
Miatoll ROMs are supposed to be compatible with Curtana if I haven't got something wrong... What's the deal with that?
I may consider flashing CherishOS instead, seems neat and the monthly updates appeal to me.
Click to expand...
Click to collapse
Indeed it is the same.
Others great roms
https://sourceforge.net/projects/blissroms/files/R/miatoll/***
https://downloads.msmxtended.org/?dir=miatoll***
Don't flash magisk right away, check if the playstore is certified.
If not delele your google account and root with the Magisk app.
Of course, if you absolutely want to root your device for other reasons, ignore that.
***certified on redmi note 7

The installation of these should only differ (on a particular device) in the ROM that's being flashed az a zip, right?
For instance, see this guide. Could that be deemed to be applicable to any custom ROM?
https://www.getdroidtips.com/lineage-os-18-1-xiaomi-mi-a2-lite/

Hsjaai said:
The installation of these should only differ (on a particular device) in the ROM that's being flashed az a zip, right?
For instance, see this guide. Could that be deemed to be applicable to any custom ROM?
https://www.getdroidtips.com/lineage-os-18-1-xiaomi-mi-a2-lite/
Click to expand...
Click to collapse
Install the right TWRP
Be sure you have the right firmware.
If not flash it.
1)Twrp wipe format data write yes reboot twrp(if error reboot twrp and format again).
2)flash rom
3)reboot system
v11.0.4.0. QJWEUXM is a turkish rom(android 10)
V12.0.2.0.RJWMIXM is a global rom(android 11)Firmware base for AOSP
It is better to use Miflash and install TWrp after.(dont relock the bootloader).

Are you sure v11.0.4.0. QJWEUXM is the Turkish version? I thought it was EEA (the one tweaked for European countries). Installing the Global version seems alright, but why does the MIUI version has such a great effect on the outcome of the flashing?
Is that because both Cherish OS and the Global version are AOSP-based?

Hsjaai said:
Are you sure v11.0.4.0. QJWEUXM is the Turkish version? I thought it was EEA (the one tweaked for European countries). Installing the Global version seems alright, but why does the MIUI version has such a great effect on the outcome of the flashing?
Is that because both Cherish OS and the Global version are AOSP-based?
Click to expand...
Click to collapse
My bad EEA
AOSP use global firmware .RJWMIXM android 11
and sometime CN firmware.
https://xiaomifirmwareupdater.com/miui/curtana/

Better Mobile App

welcome