Related
https://developers.google.com/android/nexus/images
5.1.1 (LMY48X) https://dl.google.com/dl/android/aosp/mantaray-lmy48x-factory-c955bd95.tgz
Md5 641500e561efcf5285de508fe453d84c
Update:
5.1.1 (LMY48Z) https://dl.google.com/dl/android/aosp/mantaray-lmy48z-factory-584a4d03.tgz
Md5 7d00c2fb6ed5b40222cd8a42e2d6a740
At least we still get security updates
Sent from my XT1575 using Tapatalk
Darnell_Chat_TN said:
At least we still get security updates
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
lets see for how long
stunned said:
https://developers.google.com/android/nexus/images
5.1.1 (LMY48X) https://dl.google.com/dl/android/aosp/mantaray-lmy48x-factory-c955bd95.tgz
Md5 641500e561efcf5285de508fe453d84c
Update:
5.1.1 (LMY48Z) https://dl.google.com/dl/android/aosp/mantaray-lmy48z-factory-584a4d03.tgz
Md5 7d00c2fb6ed5b40222cd8a42e2d6a740
Click to expand...
Click to collapse
How do I flash the december update? I am on rooted Android 5.1.1 (LMY48X) with TWRP custom recovery. There is no " image" extension in the tgz archive.
elgar said:
How do I flash the december update? I am on rooted Android 5.1.1 (LMY48X) with TWRP custom recovery. There is no " image" extension in the tgz archive.
Click to expand...
Click to collapse
For example use Wugfresh to install factory image without wiping data
stunned said:
For example use Wugfresh to install factory image without wiping data
Click to expand...
Click to collapse
Will xposed framework prevent from flashing via nexus root toolkit? Because I am doing it, but with no success.
I have a nexus 6 on LMY48X?
elgar said:
Will xposed framework prevent from flashing via nexus root toolkit? Because I am doing it, but with no success.
Click to expand...
Click to collapse
Of course. What made you think it wouldn't cause issues?
Sent from my Nexus 9 using Tapatalk
Installed flawlessly with Wugfresh!
Greetings! i'm currently looking for an android 6~7 rom for my huawei gr5 (compilation number on the title). I've found several but non of them matches the whole compilation and i'm afraid of bricking my phone, i've installed roms before but was on a nexus one (old old phone) so i'm basically new again. I would pretty much appreciate advice, links, and whatever might help me on this process. Thanks in advance.
There are lots of ROMs in ROMs and kernel section.
So any rom there with the kII l22 tag will work to me? Even if the c569b130 doesn't match? That's my biggest question.
kychesnko said:
So any rom there with the kII l22 tag will work to me? Even if the c569b130 doesn't match? That's my biggest question.
Click to expand...
Click to collapse
All of them will work if you have a firmware with no VoLTE.
kychesnko said:
So any rom there with the kII l22 tag will work to me? Even if the c569b130 doesn't match? That's my biggest question.
Click to expand...
Click to collapse
Those roms will work on your device...only caution is it should not be on volte..
Dont forget to Make a full backup and give it a try...
thanks for the advice!, what's VoLTE and how can i disable it?
kychesnko said:
thanks for the advice!, what's VoLTE and how can i disable it?
Click to expand...
Click to collapse
Voice over LTE. You can't simply disable it for custom Roms to work. You need to be on B350 and below because B360 and above has VoLTE.
Mine is B130 so i'm ready to flash?
kychesnko said:
Mine is B130 so i'm ready to flash?
Click to expand...
Click to collapse
Also marshmallow firmware is required..
for the marshmallow firmware update, i can't just flash a 6.0 room to update it? (was used to do that with a nexus one haha...)
kychesnko said:
for the marshmallow firmware update, i can't just flash a 6.0 room to update it? (was used to do that with a nexus one haha...)
Click to expand...
Click to collapse
No.. stock marshmallow firmware should be on your device..
You can update via OTA update.. Or you canupdate manually.
After that unlock bootloader..then flash twrp and then flash any rom you want to.
hassanjavaid8181 said:
No.. stock marshmallow firmware should be on your device..
You can update via OTA update.. Or you canupdate manually.
After that unlock bootloader..then flash twrp and then flash any rom you want to.
Click to expand...
Click to collapse
My phone currently has 5.1.1 android version (i never got a 6.0 update)
kychesnko said:
My phone currently has 5.1.1 android version (i never got a 6.0 update)
Click to expand...
Click to collapse
Did you try firmware finder??
hassanjavaid8181 said:
Did you try firmware finder??
Click to expand...
Click to collapse
I'm using it atm, there i just have to pic one with l22 right? without considering the C569?, i found this one "KII-L22C635B151CUSTC635D002", this one will work?
kychesnko said:
I'm using it atm, there i just have to pic one with l22 right? without considering the C569?, i found this one "KII-L22C635B151CUSTC635D002", this one will work?
Click to expand...
Click to collapse
No. You need to respect also the Cust version.
chrisleLP said:
No. You need to respect also the Cust version.
Click to expand...
Click to collapse
oh then there's no kernel for my device(at least on this firmware finder) it means i won't be able to flash any 5.X.X+ room?
kychesnko said:
oh then there's no kernel for my device(at least on this firmware finder) it means i won't be able to flash any 5.X.X+ room?
Click to expand...
Click to collapse
Have you tried updating using HiSuite?
chrisleLP said:
Have you tried updating using HiSuite?
Click to expand...
Click to collapse
yeah but no updates
kychesnko said:
yeah but no updates
Click to expand...
Click to collapse
Well I guess you can try from Firmware Finder. Worst case scenario is it will fail and your phone will boot normally.
chrisleLP said:
Well I guess you can try from Firmware Finder. Worst case scenario is it will fail and your phone will boot normally.
Click to expand...
Click to collapse
trying to install that with different custer? because there's no other firmware with the same custer as mine
THIS GUIDE DOESNT WORK FOR NOW THIS WAS A WORKING IN PROGRESs,. MODS PLEASE DELETE THABKS
As there are almost no p10 on Oreo already this is quite useless right now?
Gesendet von meinem VTR-L29 mit Tapatalk
webwude said:
As there are almost no p10 on Oreo already this is quite useless right now?
Gesendet von meinem VTR-L29 mit Tapatalk
Click to expand...
Click to collapse
I posted oreo update links intercambiables lwannacm thread, that's why I'm asking this, but ir there is no way, it's okay, i can delete this post
MrAlez said:
I posted oreo update links intercambiables lwannacm thread
Click to expand...
Click to collapse
Where?!?
IrrelevantWhiteMan said:
Where?!?
Click to expand...
Click to collapse
Remember, right now THERE IS NO WAY TO ROLLBACK, so once you go oreo you cant go back, ay least we make true this guide with proper files
LINKS HERE:
http://update.hicloud.com:8180/TDS/...37/f1/full/public/update_data_full_public.zip
http://update.hicloud.com:8180/TDS/...9_hw_normal/update_full_VTR-L29_hw_normal.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v107537/f1/full/update.zip
Tnx for link, this is for VTR-L29 C432?
IrrelevantWhiteMan said:
Tnx for link, this is for VTR-L29 C432?
Click to expand...
Click to collapse
yes, but remember this is dangerous, you will end up with a RELOCKED BOOTLOADER AND FRP UNLOCKED...
But why? It.s not official?
Sent from my Huawei P10 using Tapatalk
Anybody has the same problem, that the phone isn't showing up on twrp connected to the PC and MTP enabled? And the MicroSD card is "damaged" on the oreo Rom although it works perfectly well?
IrrelevantWhiteMan said:
Where?!?
Click to expand...
Click to collapse
PhoneBrick said:
Anybody has the same problem, that the phone isn't showing up on twrp connected to the PC and MTP enabled? And the MicroSD card is "damaged" on the oreo Rom although it works perfectly well?
Click to expand...
Click to collapse
Well, first question, where you hoy TWRP forma the oreo build?, Second it might be a bug that everytime you connect the p10 once you connect the device you have to manually select the mtp option also when using adb the same thing and third your SD might be broken, try changing the sd
updated
DOens't work
i HAVE TRIED SEVERAL TIMES THE PROCESS BUT IT DOESN ROLLBACK TO NOUGAT. I UPGRADED TO OREO VIA HWOTA USING DOWNLOADED FIRMWARE FROM GOOGLE AND I DONT FIND THE WAY TO ROOLBACK TO NOUGAT. I HAVE DONE ALL THE STEPS BUT IT ALWAYS STUCKS IN 6% WHEN IT TRIES TO UPDATE.
txonan said:
i HAVE TRIED SEVERAL TIMES THE PROCESS BUT IT DOESN ROLLBACK TO NOUGAT. I UPGRADED TO OREO VIA HWOTA USING DOWNLOADED FIRMWARE FROM GOOGLE AND I DONT FIND THE WAY TO ROOLBACK TO NOUGAT. I HAVE DONE ALL THE STEPS BUT IT ALWAYS STUCKS IN 6% WHEN IT TRIES TO UPDATE.
Click to expand...
Click to collapse
Yes it happens for now we are stuck at oreo, we nneed a rollback firmware that isnt released by huawei sorry.
MrAlez said:
Yes it happens for now we are stuck at oreo, we nneed a rollback firmware that isnt released by huawei sorry.
Click to expand...
Click to collapse
thanks for your reply,
So lets wait till is released. Do you know when are they going to release the official final Oreo update? Maybe January? I guess that when they release it the rollback firmware will be released too or a bit later.
Hi!
After a factory reset under Oreo 8.0.0.311, I'm on 8.0.0.046(01BN) now. I can't update with HWOTA or firmware finder. What can I do?
Oiphobie said:
Hi!
After a factory reset under Oreo 8.0.0.311, I'm on 8.0.0.046(01BN) now. I can't update with HWOTA or firmware finder. What can I do?
Click to expand...
Click to collapse
i am stuck on this version too.
have you succeed to do something?
t.h.i said:
i am stuck on this version too.
have you succeed to do something?
Click to expand...
Click to collapse
I have the same problem. I made it now to install TWRP by this method:
https://forum.xda-developers.com/p10/help/downgrade-oreo-t3726161
But when I start installing with update.bat (http://www.stechguide.com/install-android-8-0-oreo-on-huawei-p10), it stops when I am in TWRP mode. TWRP does not find my p10 in usb mode. So no installation. Any suggestions?
Close thread
Is there one for the S7 Active?
ThunderingLight said:
Is there one for the S7 Active?
Click to expand...
Click to collapse
Hasn't been found yet
Ok can you update the post once it has been found?
So, anyone flash this yet? I'm tempted but won't be back home to a PC (in case something goes wrong) until tonight. Just looking for some general impressions.
So, I did this. Pretty impressed with the overall device feel now, SE9 is nice . No hang ups other thank it took a long friggin' time, also remember this will WIPE all the data, so make sure to do a backup prior to. The initial/first phone setup is very iPhone-ish, imo.
bobloblaw1 said:
So, anyone flash this yet? I'm tempted but won't be back home to a PC (in case something goes wrong) until tonight. Just looking for some general impressions.
Click to expand...
Click to collapse
Be warned; this update is ONLY for SM-G930A firmware - it has a second-stage updater that blocks all other versions (including SM-G930T, which I myself tried). In other words, it is a carrier-specific update, folks.
PGHammer said:
Be warned; this update is ONLY for SM-G930A firmware - it has a second-stage updater that blocks all other versions (including SM-G930T, which I myself tried). In other words, it is a carrier-specific update, folks.
Click to expand...
Click to collapse
Will it work for sm-g930u at&t ????
mhdsweidan said:
Will it work for sm-g930u at&t ????
Click to expand...
Click to collapse
HIGHLY doubtful - not with a specific firmware check in place.
mhdsweidan said:
Will it work for sm-g930u at&t ????
Click to expand...
Click to collapse
You could try flashing G930A firmware in Odin and updating that way.
(Not sure it'll work though)
Sent from my SM-G955U using Tapatalk
If switching from u firmware back to att ql1 what version is capable of flashing att haven't been on carrier firmware since mm , wanna try Oreo
miko12312 said:
If switching from u firmware back to att ql1 what version is capable of flashing att haven't been on carrier firmware since mm , wanna try Oreo
Click to expand...
Click to collapse
What's your bootloader version? (5th from last letter in build number)
Sent from my SM-G955U using Tapatalk
FatalONEM8 said:
You could try flashing G930A firmware in Odin and updating that way.
(Not sure it'll work though)
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
If it weren't for this being a daily driver, I'd consider it. However, because it is, that's not an option. So I'll have to wait for either a neutral version or one that will work with the SM-G930T.
I am currently testing it out, I was on the latest U firmware and downloaded the latest ATT firmware, will update on how it goes
**EDIT
I am getting a model mismatch trying to flash G930AUCS4BRA1 (full odin file) on to a G930UUES4BRA1 firmware
micallan_17 said:
I am currently testing it out, I was on the latest U firmware and downloaded the latest ATT firmware, will update on how it goes
**EDIT
I am getting a model mismatch trying to flash G930AUCS4BRA1 (full odin file) on to a G930UUES4BRA1 firmware
Click to expand...
Click to collapse
Try using PrinceComsy Odin
Sent from my SM-G955U using Tapatalk
oreo otas
Goodnight friends, I started to update my phone to version 8.0 but it has more than 30 min in the option of patchin system files is normal or my step to better life is my s7.
Excuse me for my English since it is not my native language.
spend the fright of my life but finally install now approve to see how it works on android 8.0
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Has anyone been able to successfully downgrade back to RA1 after sideloading 8.0?
chewis559 said:
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Click to expand...
Click to collapse
Just reboot in recovery mode and wipe cache
chewis559 said:
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Click to expand...
Click to collapse
I had the same issue. The recommendation of rebooting into recovery and wiping Cache works.
:good:
Anyone tried using the firmware update app to download the latest update ?
Kavitam said:
Anyone tried using the firmware update app to download the latest update ?
Click to expand...
Click to collapse
Emui 8.1 won't support ff update as of now.
miststudent2011 said:
Emui 8.1 won't support ff update as of now.
Click to expand...
Click to collapse
Download the latest version with firmware finder and then flash it with HuRUpdater or nocheck recovery. It should work
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
Download the latest version with firmware finder and then flash it with HuRUpdater or nocheck recovery. It should work
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
For that you need bootloader unlocked. I think he is trying to do that on stock unmodified .
youtuber123 said:
Download the latest version with firmware finder and then flash it with HuRUpdater or nocheck recovery. It should work
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
as of now theres is no 'no check recovery'
awells845 said:
as of now theres is no 'no check recovery'
Click to expand...
Click to collapse
There is : https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085 confirmed working on other devices from Huawei/Honor
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
There is : https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085 confirmed working on other devices from Huawei/Honor
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
Thanks.
Just a quick heads up for everyone thinking of using HuRUpdater for Honor 10 as I hard bricked my Honor 10 trying it out even by triple checking instructions carefully. It's definitely not compatible with it. Now I had to get it sent off for warranty repair. :crying:
awells845 said:
Thanks.
Just a quick heads up for everyone thinking of using HuRUpdater for Honor 10 as I hard bricked my Honor 10 trying it out even by triple checking instructions carefully. It's definitely not compatible with it. Now I had to get it sent off for warranty repair. :crying:
Click to expand...
Click to collapse
Can you still access to the bootloader or the erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
youtuber123 said:
Can you still access to the bootloader or the erecovery?
Sent from my HUAWEI BKL-L09 using XDA Labs
Click to expand...
Click to collapse
No nothing at all. Tried everything. It's completely hard bricked. I even tried getting it to boot into fastboot mode but the display doesn't even turn on. I had to beg my mum to let me buy a new smartphone. I'm thankfully getting the OnePlus 6 and will sell the Honor 10 when it comes back from repair to pay my mum back. The only thing stuck in my mind is wishing I had just used erecovery earlier.
awells845 said:
No nothing at all. Tried everything. It's completely hard bricked. I even tried getting it to boot into fastboot mode but the display doesn't even turn on. I had to beg my mum to let me buy a new smartphone. I'm thankfully getting the OnePlus 6 and will sell the Honor 10 when it comes back from repair to pay my mum back. The only thing stuck in my mind is wishing I had just used erecovery earlier.
Click to expand...
Click to collapse
Which build did you try ?
miststudent2011 said:
Which build did you try ?
Click to expand...
Click to collapse
I used HurUpdater v0.3.zip and downloaded all firmware files for COL-L29 8.1.0.1.0.4 and renamed the files to match the HurUpdater thread https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 Then I flashed in TWRP Recovery. It flashed successfully and I rebooted once complete. Then I got the black screen of death and tried to turn the phone on.
It's strange as the thread shows that it works for the P20 that has the same processor and confirmed by a user.
awells845 said:
I used HurUpdater v0.3.zip and downloaded all firmware files for COL-L29 8.1.0.1.0.4 and renamed the files to match the HurUpdater thread https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 Then I flashed in TWRP Recovery. It flashed successfully and I rebooted once complete. Then I got the black screen of death and tried to turn the phone on.
It's strange as the thread shows that it works for the P20 that has the same processor and confirmed by a user.
Click to expand...
Click to collapse
I think there is some issue with those build in firmware finder one of my friend tried .120 build with HurUpdater and it flashed but got different device build installed. Its showing device as fty-l29 with chipset-boston as build number and may security patch .
But when he tried with 104 his device also bricked and currently can't switch on. Does any one of you know a way to recover it.
miststudent2011 said:
I think there is some issue with those build in firmware finder one of my friend tried .120 build with HurUpdater and it flashed but got different device build installed. Its showing device as fty-l29 with chipset-boston as build number and may security patch .
But when he tried with 104 his device also bricked and currently can't switch on. Does any one of you know a way to recover it.
Click to expand...
Click to collapse
Ah okay, glad I'm not alone. I tried to search for solutions too but nothing. It would be ideal if Huawei/Honor had a similar tool like what OnePlus have for there devices because it's as simple as using an MSM Download Tool and installing the Qualcomm Drivers and then flashing all files in the firmware. Huawei/Honor could have one for Kirin devices.