[ROM][SM-T580][SM-T585][UNOFFICIAL][9.0] CrDroid-5.10 64bit 20191113 - Samsung Galaxy Tab A series ROMs, Kernels, Recover

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
https://github.com/crdroidandroid/crdroid_features/blob/9.0/README.mkdn
Instructions
1. Install latest TWRP
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
almost all
Known Issues
-
Notes
20190316 build - huge update:
1. New kernel, our is very old 3.18.14, new one is 3.18.91. this is latest M105FDDU1ASB2 from relative exynos7870
2. Our wifi driver depends on the kernel. I can't just take a new kernel (or update the current one), it will most likely cause a kernel panic with the current wifi module. For some reason, samsung cut out the wifi sources/config from kernel. So I spent a week and was able to add the source of the wifi driver to the kernel and made a config for it. As result we can forgot about stand alone .ko wifi module, now it's part of kernel. And as bonus: our old wifi module's version is: 4.0.10.205Y_0903, new one is: 4.0.11.213X
3. I reviewed the defconfigs, make it similar to m10 from latest kernel, updated the file systems config (thanks to @followmsi), activated pie sdcardfs sources, fixed vibrator for T585 (it was big misunderstand with dtb blocks)
4. I fixed the build logic of the dtb part (now it's part of defconfig)
5. I added doze service (power consumption)
6. I added fingerprint from xiaomi sagit (for pass safetynet check in Magisk, thanks @followmsi)
CrDroid Builds
SM-T580
13. 20191113: november security patch: https://drive.google.com/file/d/1C5DMY61FZ9g3VGAg5gGUMhW3Jqbwec0W/view?usp=sharing
12. 20191023: october security patch: https://drive.google.com/file/d/1hNTAqaZ7g7oq4Vy2oSYbeQIu76SM8yE9/view?usp=sharing
11. 20190925: september security patch: https://drive.google.com/file/d/1-P_LEfXhVLBmeS0VwF3i8joEQ3zwtzAB/view?usp=sharing
10. 20190812: august security patch: https://drive.google.com/file/d/16Qe_cMkU2HhaAo10Viedn_WgP05_Cc-a/view?usp=sharing
9. 20190708: july security patch: https://drive.google.com/file/d/11pA-wAzhvlj1zfXlzVUARCTOvdH40IQ_/view?usp=sharing
8. 20190518: OC support, update wifi driver (4.0.10.206A_20181017): https://drive.google.com/file/d/15D9pbWHlO81FZK-v_gHFOs2TwU5Y57gK/view?usp=sharing
7. 20190320: fix flip: https://drive.google.com/file/d/1WJoEKXbUyzEmz5Y8bv9wf-XhforXVTD7/view?usp=sharing
6. 20190319: fix flip: https://drive.google.com/file/d/1JnpkeaHcS6ioCV-DnULXFluvxImzzQaJ/view?usp=sharing
5. 20190316: test version with huge update (but it look very stable): fix vibrator, new kernel, new defconfig, new wifi driver, doze (see notes): https://drive.google.com/file/d/1sSvFT-zJWSndsqnORXvFv20vg73wsDmo/view?usp=sharing
4. 20190304: fix magisk check: https://drive.google.com/file/d/1RqY7XeTX-ymllgFPpWu0yePRDCOCaRnz/view?usp=sharing
3. 20190208: security patch level - february 5, 2019: https://drive.google.com/open?id=1Gh3rfyZoPSL6FwTKBxJ-yS7AVu_hV7zf
2. 20190126: https://drive.google.com/file/d/1d5zLEIpqgRSh9cGJ_sQAHnOelghKYMgW/view?usp=sharing
1. 20181227: https://drive.google.com/file/d/1B_T8tRt3bkFFlBUhzNUzrkLwx3RGMlGq/view?usp=sharing
SM-T585
13. 20191113: november security patch: https://drive.google.com/file/d/1X4O_4XKwjjQnX8f1EwOs7D3gDsMfZ_Ds/view?usp=sharing
12. 20191023: october security patch: https://drive.google.com/file/d/1c9-eTUFtxSP-O7DyVh-qUtaAy7EUvzFB/view?usp=sharing
11. 20190925: september security patch: https://drive.google.com/file/d/1RojeJODTDFBp4fhROMGneNqJOPW5VXbl/view?usp=sharing
10. 20190812: august security patch: https://drive.google.com/file/d/1XYWypFLaoXdr5HP4Upt0Ja6p1YVHjD7H/view?usp=sharing
9. 20190708: july security patch: https://drive.google.com/file/d/1-d2F_Io24Bq8yxYPM6vynDJWP5qVjK6p/view?usp=sharing
8. 20190518: OC support, update wifi driver (4.0.10.206A_20181017): https://drive.google.com/file/d/1CAHqxIpreCjWi0WmFTEQbaIKdy-6yTAM/view?usp=sharing
7. 20190320: fix flip: https://drive.google.com/file/d/1uoaUTY_f1oA8llFnZaPH3ZydmLQvYjM5/view?usp=sharing
6. 20190319: fix flip, access point, gps: https://drive.google.com/file/d/16bbfyA74JTZ5TCVKTZaSq_U1rBqi-EPp/view?usp=sharing
5. 20190316: test version with huge update (but it look very stable): fix vibrator, new kernel, new defconfig, new wifi driver, doze (see notes): https://drive.google.com/file/d/16Do_OmOjJu-OiT0QVVWf1mERUWoSOd9o/view?usp=sharing
4. 20190304: fix magisk check: https://drive.google.com/file/d/1Z1TZ9e9K9r4Mnq6omK_oeSsJYXxqJAtB/view?usp=sharing
3. 20190208: security patch level - february 5, 2019: https://drive.google.com/open?id=1oev653zKDOJWE2hYgKrPAqSe-J2gZWVK
2. 20190126: https://drive.google.com/file/d/1e9fbAgOp9deum6Kn_8ais6178g5f4Obl/view?usp=sharing
1. 20181227: https://drive.google.com/file/d/1c8oaN6J-zouxnrZfCb50m1zL18XVeUCh/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM64
Android: 9.0
Variant: any
Root
Install official Magisk. if Magisk Manager missed in apps - install Magisk Manager apk
TWRP
official twrp:
SM-T580: https://twrp.me/samsung/samsunggalaxytaba101wifi2016.html
SM-T585: https://twrp.me/samsung/samsunggalaxytaba101lte2016.html
Sources
Sources: https://github.com/crdroidandroid
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Device: https://github.com/Valera1978/android_device_samsung_gtaxlwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxlwifi
Thanks
Thanks to CrDroid team
Thanks to LineageOS team

@Valera1978 thanks a lot for this awesome rom! All functions work just perfectly! Nice!:good:

This looks pretty awesome, will try later and update this post with the results. Thanks for sharing!

You're simply the best among the rest .. May God bless you with long life to continue supporting these devices for u give them life

the best rom for me so far for my 580. almost all is working. thank you very much, 100 stars ??
Edit:I did a clean install again with magisk 18 & dolby. using nova launcher. screen orientation is working fine now, no problems at all. Perfect Rom.

Guys please hit "Thanks" button in OP. Support the dev

repey6 said:
Guys please hit "Thanks" button in OP. Support the dev
Click to expand...
Click to collapse
That's the least anyone can do. Even if they don't use this rom - if you are using a custom AOSP based rom for SM-T58x tablet, probably Valera1978 and/or followmsi is the man who made it possible for you to use that rom on your device. You guys brought a lot of smiles on the faces of us, users (well at least me, for sure). Hope you are at peace with each other and can achieve synergy and also appreciate the feedback of the happy users. Have a happy, healthy new year.
Anyway, I can think of two questions at the moment:
If I may suggest ideas for further development - would it be possible to add support for the CIFS filesystem, so we could mount network shares?
And less importantly and out of curiosity, not specifically for this device - do CrDroid roms support additional lockscreen shortcuts, besides the two in the bottom corners (like RR roms do)?

1.When i change screen orientation from portrait to horizontal , part of the home wallpaper becomes black
2.when I make changes in settings , the phone will freeze unless I press the power button ? for the screen to go off then press the power button ? and unlock it again before I can proceed with whatever I was doing. My first experience was when I was trying to turn off the hardware keys, the screen froze after disabling the hardware keys/buttons… please look into it and rectify the problem for this is a wonderful rom with tones of features…
Edited : 3. magisk not passing safetynet
Sent from T585
I made a clean flash and used opengapps micro

DILTON said:
My first experience was when I was trying to turn off the hardware keys, the screen froze after disabling the hardware keys/buttons…
Click to expand...
Click to collapse
Yep, disabling hardware keys does that. And does not work actually, at least from quick settings.
Also, I had an issue with charging - it stopped at 80%.. Don't remember if I charged the tablet when on lineage 16 and if it charged fully - might try that some time (using T585).

mnd123 said:
Yep, disabling hardware keys does that. And does not work actually, at least from quick settings.
Also, I had an issue with charging - it stopped at 80%.. Don't remember if I charged the tablet when on lineage 16 and if it charged fully - might try that some time (using T585).
Click to expand...
Click to collapse
Actually my tablet is only 1 month old and the battery charges to full on this rom.

DILTON said:
Actually my tablet is only 1 month old and the battery charges to full on this rom.
Click to expand...
Click to collapse
Interesting, is your tablet T580 (wifi version) or T585 (LTE version with a sim card)? Will have to keep this rom for another recharge anyway.

My tablet also has no problems charging fully on this rom. My issue right now is it will not pass Safety checks in Magisk and I cannot play some of my games now.

DILTON said:
1.When i change screen orientation from portrait to horizontal , part of the home wallpaper becomes black
2.when I make changes in settings , the phone will freeze unless I press the power button for the screen to go off then press the power button and unlock it again before I can proceed with whatever I was doing. My first experience was when I was trying to turn off the hardware keys, the screen froze after disabling the hardware keys/buttons… please look into it and rectify the problem for this is a wonderful rom with tones of features…
Edited : 3. magisk not passing safetynet
Sent from T585
I made a clean flash and used opengapps micro
Click to expand...
Click to collapse
Go here: https://magiskroot.net/bypass-safetynet-issue-cts/
Download the last one "Latest Module By Didgeridoohan".
This will fix your BasicIntegrity check and allow your apps to run. I couldn't use Nintendo mobile games but with that they all work fine now.

mnd123 said:
Interesting, is your tablet T580 (wifi version) or T585 (LTE version with a sim card)? Will have to keep this rom for another recharge anyway.
Click to expand...
Click to collapse
T585
---------- Post added at 06:35 AM ---------- Previous post was at 06:34 AM ----------
Herox said:
Go here: https://magiskroot.net/bypass-safetynet-issue-cts/
Download the last one "Latest Module By Didgeridoohan".
This will fix your BasicIntegrity check and allow your apps to run. I couldn't use Nintendo mobile games but with that they all work fine now.
Click to expand...
Click to collapse
Thanks

I have realized that, this rom consumes more battery than normal please look into it
---------- Post added at 06:55 AM ---------- Previous post was at 06:53 AM ----------
Herox said:
My tablet also has no problems charging fully on this rom. My issue right now is it will not pass Safety checks in Magisk and I cannot play some of my games now.
Click to expand...
Click to collapse
I suggest you go back to the previous build

DILTON said:
I have realized that, this rom consumes more battery than normal please look into it
Click to expand...
Click to collapse
I do not see this.

repey6 said:
I do not see this.
Click to expand...
Click to collapse
Me too. My tablet charged only to 80% the first time, but the battery life is great.
Will have to test the full charging a few more times, maybe using different chargers, because I normally use a lower power charger, than the one that came with the tablet.

repey6 said:
I do not see this.
Click to expand...
Click to collapse
Really?? Then I would wait for it to discharge completely, charge it to 100% and monitor it again. Because when the battery ? is at 100% and I reboot the device with phone still charging, it falls to 98% which is abnormal.

Anybody would be willing to test if this app is working on this rom? When trying to install it shows a message that the app can't be installed, and I don't remember if I tested it on lineage..but it worked on RR nougat.
https://emby.media/community/index.php?/topic/53944-emby-server-for-android/page-1
Also I can't seem to find a global setting for installing apps from unknown sources, maybe this could be a solution (even though I enabled it, when asked, for google chrome)
Edit - nevermind, it was because of low internal storage

Formatted sd care as internal, moves files over and it froze on68%. Any ideas?

Related

[ROM][SM-T580/585][UNOFFICIAL][RR-PIE-v7.0.2][64-Bit] -> 20191108 (DISCONTINUED)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix P ​
RR-P-v7.0.2-20191108-gtaxlwifi-Unofficial.zip (DISCONTINUED)
RR-P-v7.0.2-20191108-gtaxllte-Unofficial.zip (DISCONTINUED)
Known issues:
MP4 recording bug after deep sleep.
Pls use "Footej Camera" to bypass this problem.
Changes:
Moved changelog to post #2 ..
https://forum.xda-developers.com/showpost.php?p=78740403&postcount=2
Installation:
1. Boot into TWRP
2. Wipe system, cache and dalvik and data (if you are encrypted, pls format data partition !)
3. Install ROM.zip
4. install opengapps (9.0 - arm64)
5. install Magisk.zip
6. Reboot into system
Upgrade:
1. Boot into TWRP
2. Install ROM.zip
3. Wipe cache and dalvik
4. Reboot into system
- Please install Magisk.zip yourself.
- If you face any strange issues, pls do a factory reset via TWRP first.
DOWNLOAD:
https://androidfilehost.com/?w=files&flid=289836
https://androidfilehost.com/?w=files&flid=289838
TWRP:
Official version has been fixed ..
https://dl.twrp.me/gtaxlwifi/
https://dl.twrp.me/gtaxllte/
SOURCES:
https://github.com/followmsi/manifests/tree/gtaxl-rros-lineage-16.0
https://github.com/ResurrectionRemix
Thanks to @cschsz for some kernel security updates !
Big thanks to @Valera1978 for his ongoing work !
Enjoy ..
Changes:
RR-P-v7.0.2-20191108 - Final build
- Google security updates -> November 2019
- Fix for Vulkan API
- Kernel: Update to latest WireGuard version 20191012
RR-P-v7.0.2-20191016
- Google security updates -> October 2019
RR-P-v7.0.2-20190915
- Google security updates -> September 2019
- Fix front camera crash on record video -> thanks to @Valera1978 !
- Kernel: Various code and security patches.
- Kernel: Updated WireGuard to latest version -> WireGuard-0.0.20190913
RR-P-v7.0.2-20190809
- Google security updates -> August 2019
RR-P-v7.0.2-20190722
- Google security updates -> July 2019
- Removed "NightDisplay" from Display settings menu
- LiveDisplay is back (disabled by default)
- Kernel: enabled ZRAM support (use "kernel adiutor" to configure)
RR-P-v7.0.2-20190615
- Fix for Gestures menu: Settings -> System -> Gestures
- .md5sum files are back -> fixed by RR team
RR-P-v7.0.2-20190604
- Google security updates -> June 2019
- kernel: Upstream to 3.18.140
- kernel: New WiFi driver
- LiveDisplay: disabled by RR team
RR-P-v7.0.2-20190511
- Google security updates -> May 2019
- kernel: Upstream to 3.18.139 (other minor changes)
- Re-enabled Samsung Doze
RR-P-v7.0.1-20190411
- kernel: Wifi driver: switch to own built kernel module
- kernel: disabled KNOX
- Wifi config changes
- Adjusted Overlays (Ambient Display and WifiDisplay)
- Disabled Samsung Doze (fixes Ambient Display)
RR-P-v7.0.1-20190404
- Google security updates -> April 2019
- Merged latest changes from @Valera1978
- New kernel -> 3.18.138 -> CPU/GPU OC .. HMP .. etc.
- adjusted p2p/wpa_supplicant_overlay.conf
RR-P-v7.0.1-20190321
- Merged latest changes from @Valera1978
- New kernel -> 3.18.91 -> Big thanks to @Valera1978 !
- kernel: Added several android binder pachtes from previous Oreo/Pie kernels.
- kernel: Added WIREGUARD support
- kernel: Added exFAT support
- kernel: More kernel security updates -> thanks to @cschsz
RR-P-v7.0.1-20190309
- Google security updates -> March 2019
- Update to RR-P-v7.0.1
- More sepolicy changes -> active neverallows
- hardware/samsung -> merged latest LineageOS changes (audio/bt/voip/calls)
RR-P-v7.0.0-20190225
- Set Vendor security patch level
- Adjusted sepolicies due to activated neverallows by RR-Team
- kernel: Added several android binder pachtes from previous Oreo/Pie kernels.
- kernel: Added some graphics patches from previous Oreo/Pie kernels.
- kernel: Added WIREGUARD support
- kernel: More kernel security updates -> thanks to @cschsz
RR-P-v7.0.0-20190209
- Bug fix release: RR-Team did fix Power/Reboot menu in landscape mode
RR-P-v7.0.0-20190207
- Google security updates -> February 2019
- More kernel security updates -> thanks to @cschsz
RR-P-v7.0.0-20190123
- initial release
RR team did finally publish the sources .. RR 7.0 is live !
Tested the SM-T580 build as dirty install on top of Lineage-16.0 (64-bit) - no problems at all.
Magisk 18.0 works fine too.
Enjoy Resurrection Remix
Hi @followmsi,
Thanks again for your dedicated work(s ) on our tablet.
One question:
Is cam recording via Skype (or other apps) working on both sides (back and front)?
Or only on one side (front(face)) like other PIE releases?
Thanks for your reply.
followmsi said:
RR team did finally publish the sources .. RR 7.0 is live !
Tested the SM-T580 build as dirty install on top of Lineage-16.0 (64-bit) - no problems at all.
Magisk 18.0 works fine too.
Enjoy Resurrection Remix
Click to expand...
Click to collapse
awesome,
just tested with T585 very briefly. It installed ok, the system ui crashed during first boot, but after a reboot everything went fine.
Tested the cameras with open camera app and camera2 api enabled - both cameras take photos and can record videos. Flash working ok. Didn't test with skype or other apps.
The photo camera app (I think google camera from gapps, maybe, or the default camera app - I'm not sure) keeps crashing sometimes, even without opening it manually, but that happened on other pie roms aswell.
Using the GPS was freezing the tablet at first (as usual with pie for me). But after awhile started to work ok and got a fix on gps test app.
The only thing I'm worried about now is how the charging will behave. On other pie roms (and I think probably on some oreo roms) it kept stopping at around 80% for me (when using a low power charger, but I think I tried with the original charger a few times and results were the same. It will take some time to test this using different chargers (keeping my fingers crossed, that it would be enough to charge once with the low power charger and confirm that it charges to 100% at first try. But if not - another few charging cycles will be needed). Will post about any results regarding charging.
Also I have a question - does this rom include the kernel that has CIFS support, or should we install it separately (didn't find the time to test this yet, sorry..)
Anyway - good job, seems like a great start with RR pie for our tablets.
bc1977 said:
Hi @followmsi,
Thanks again for your dedicated work(s ) on our tablet.
One question:
Is cam recording via Skype (or other apps) working on both sides (back and front)?
Or only on one side (front(face)) like other PIE releases?
Thanks for your reply.
Click to expand...
Click to collapse
Same sources .. looks like the same "problem" .. maybe we need to adjust config only.
Video recording works on both front and back camera in builtin snap camera.
mnd123 said:
awesome,
just tested with T585 very briefly. It installed ok, the system ui crashed during first boot, but after a reboot everything went fine.
Tested the cameras with open camera app and camera2 api enabled - both cameras take photos and can record videos. Flash working ok. Didn't test with skype or other apps.
The photo camera app (I think google camera from gapps, maybe, or the default camera app - I'm not sure) keeps crashing sometimes, even without opening it manually, but that happened on other pie roms aswell.
Using the GPS was freezing the tablet at first (as usual with pie for me). But after awhile started to work ok and got a fix on gps test app.
The only thing I'm worried about now is how the charging will behave. On other pie roms (and I think probably on some oreo roms) it kept stopping at around 80% for me (when using a low power charger, but I think I tried with the original charger a few times and results were the same. It will take some time to test this using different chargers (keeping my fingers crossed, that it would be enough to charge once with the low power charger and confirm that it charges to 100% at first try. But if not - another few charging cycles will be needed). Will post about any results regarding charging.
Also I have a question - does this rom include the kernel that has CIFS support, or should we install it separately (didn't find the time to test this yet, sorry..)
Anyway - good job, seems like a great start with RR pie for our tablets.
Click to expand...
Click to collapse
GPS is your very special problem
As said above .. builtin Snap camera works too - without issues. ( video and photo on both cams )
I dont not have any charging issues .. always 100% !
Same kernel for all (my) ROMs.
Yes - CIFS, NFS and ExFAT are part of all (my) Pie Roms. ( AICP too )
It's fix in the kernel sources and will be included into each new ROM automatically .. forever
Cheers
followmsi said:
GPS is your very special problem
As said above .. builtin Snap camera works too - without issues. ( video and photo on both cams )
I dont not have any charging issues .. always 100% !
Same kernel for all (my) ROMs.
Yes - CIFS, NFS and ExFAT are part of all (my) Pie Roms. ( AICP too )
It's fix in the kernel sources and will be included into each new ROM automatically .. forever
Cheers
Click to expand...
Click to collapse
Thanks for your continued work :good:
Did you by any chance add sysserv so Substratum can work properly or are you waiting for them to fully fix it first?
followmsi said:
RR team did finally publish the sources .. RR 7.0 is live !
Tested the SM-T580 build as dirty install on top of Lineage-16.0 (64-bit) - no problems at all.
Magisk 18.0 works fine too.
Enjoy Resurrection Remix
Click to expand...
Click to collapse
Yeah, back to RR Pie (CrDroid before). Great Rom, Thx ??
followmsi said:
GPS is your very special problem
Cheers
Click to expand...
Click to collapse
It sure is.. Ever since the first custom rom I installed on the tablet - RR nougat. Though I believe it will start functioning flawless at some point
Though I thought the gps freezes are a one time thing after installing/restoring a pie rom, but it started freezing again when trying to use location again after a few hours when it was turned off. But I'll keep testing of course and maybe even resort to installing a stock rom through odin if I am convinced that it is different to restoring the custom rom with twrp (gps works fine this way on stock).
Also, I couldn't get the cifs mount to work, using the same command with busybox as in nougat, but will continue to do my research on this. Maybe I'm missing something and the process is somehow different on pie.
One other thing, which is probably not device specific - is there hope for upper lockscreen shortcuts to be enabled on RR pie? I didn't see them in the RR settings, but maybe this feature is not included yet on pie. Were the upper lockscreen shortcuts (like the music and camera in the attached screenshot) included in RR oreo?
Nimueh said:
Thanks for your continued work :good:
Did you by any chance add sysserv so Substratum can work properly or are you waiting for them to fully fix it first?
Click to expand...
Click to collapse
No idea about current substratum situation on pie.
For the moment no time for experiements
mnd123 said:
It sure is.. Ever since the first custom rom I installed on the tablet - RR nougat. Though I believe it will start functioning flawless at some point
Though I thought the gps freezes are a one time thing after installing/restoring a pie rom, but it started freezing again when trying to use location again after a few hours when it was turned off. But I'll keep testing of course and maybe even resort to installing a stock rom through odin if I am convinced that it is different to restoring the custom rom with twrp (gps works fine this way on stock).
Also, I couldn't get the cifs mount to work, using the same command with busybox as in nougat, but will continue to do my research on this. Maybe I'm missing something and the process is somehow different on pie.
One other thing, which is probably not device specific - is there hope for upper lockscreen shortcuts to be enabled on RR pie? I didn't see them in the RR settings, but maybe this feature is not included yet on pie. Were the upper lockscreen shortcuts (like the music and camera in the attached screenshot) included in RR oreo?
Click to expand...
Click to collapse
No idea about (missing) feature in Pie.
Pls check general RR website for more details on features/settings.
Cheers
followmsi said:
No idea about current substratum situation on pie.
For the moment no time for experiements
Click to expand...
Click to collapse
ATM Subs only works on rooted Pie and you have to reboot after building overlays and before you can apply them.
Thanks for your reply ... I'll definitely keep an eye on the whole Pie situation and will flash your RR as soon as the Subs team sorts and RR implements it :fingers-crossed:
Installed this rom yesterday everything works fine. Stock camera works fine ? on both front and back. Also tested on whatsapp video call not on Skype since I dont use it. Plus guys tell me what do you mean by gps hanging up I only use it for maps, Google Earth and street view works fine no error. ? charges to full and great battery life no issues detected yet. Great rom thanks.
Thx for this rr rom ,clean instal and camera ,gps is working.
HJZEE said:
Plus guys tell me what do you mean by gps hanging up
Click to expand...
Click to collapse
As followmsi said, this might be only my special problem
If you don't notice any issues - don't worry about it.
I installed this rom on my SM t585 yesterday.
Everything works except vibration. I tried installing LineageOS 16 before and I had the same problem. Vibration works perfectly when I boot into TWRP.
I installed after wiping all partitions of course. Does anyone have the same problem?
forchita said:
I installed this rom on my SM t585 yesterday.
Everything works except vibration. I tried installing LineageOS 16 before and I had the same problem. Vibration works perfectly when I boot into TWRP.
I installed after wiping all partitions of course. Does anyone have the same problem?
Click to expand...
Click to collapse
Yup Same here I was wondering why tablet doesn't vibrate during call or when I enabled vibration in keyboard. Not a major issue for me but still would be nice if it is fixed.?
HJZEE said:
Yup Same here I was wondering why tablet doesn't vibrate during call or when I enabled vibration in keyboard. Not a major issue for me but still would be nice if it is fixed.?
Click to expand...
Click to collapse
So happy to know that I am not alone. For me it is really disturbing to type without feedback. I hope it will be fixed soon
forchita said:
So happy to know that I am not alone. For me it is really disturbing to type without feedback. I hope it will be fixed soon
Click to expand...
Click to collapse
Just enable keyboard type sound in gboard setting till vibration is fixed. Hope Msi fixes it soon.

[ROM][SM-T580][SM-T585][UNOFFICIAL][10.0] CrDroid-6.7 64bit 20200630

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
https://github.com/crdroidandroid/crdroid_features
Instructions
1. Install latest TWRP
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
almost all
Known Issues
-
Notes
CrDroid Builds
SM-T580
3. 20200630: june security patch, review device tree, switch to samsung stock sound: https://drive.google.com/file/d/16Gj2-mVqfCX4CcWT2qIjvL3vdgvWcHzi/view?usp=sharing
2. 20191118: november security update, update video driver up to r28, update omx codecs, latest updates from @followmsi: https://drive.google.com/file/d/14A0ya79Z4dQNWV9K6fUHRRqW40ptwEWk/view?usp=sharing
1. 20191101: https://drive.google.com/file/d/1KVV2JRqmL41ziJlHoHVJP133Atxo4hvN/view?usp=sharing
SM-T585
3. 20200630: june security patch, review device tree, switch to samsung stock sound: https://drive.google.com/file/d/1JtiHCkM6D7jwAT20aHCjrwN8cYWz073K/view?usp=sharing
2. 20191117: november security update, update video driver up to r28, update omx codecs, latest updates from @followmsi: https://drive.google.com/file/d/1sqiNlEDkwXxrgDceRqhGLEsWJcBHvhYS/view?usp=sharing
1. 20191101: https://drive.google.com/file/d/1B2sFQyhxVlc3T4Gp8OtCvdjNbETb64vz/view?usp=sharing
Gapps
- For now i'm using gapps from: - For now i'm using gapps from: https://forum.xda-developers.com/and...0-0-0-t3968500
- or you can use gapps from: https://www.cyanogenmods.org/download-gapps-for-android-10/
still not available: https://opengapps.org
Platform: ARM64
Android: 10.0
Variant: any
Root
Install latest magisk from canary channel (version 20.1+): https://forum.xda-developers.com/apps/magisk/dev-magisk-canary-channel-bleeding-edge-t3839337
TWRP
official twrp:
SM-T580: https://twrp.me/samsung/samsunggalaxytaba101wifi2016.html
SM-T585: https://twrp.me/samsung/samsunggalaxytaba101lte2016.html
Sources
Sources: https://github.com/crdroidandroid
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Device: https://github.com/Valera1978/android_device_samsung_gtaxllte and https://github.com/Valera1978/android_device_samsung_gtaxlwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxllte and https://github.com/Valera1978/android_vendor_samsung_gtaxlwifi
Thanks
Thanks to CrDroid team
Thanks to LineageOS team
Thanks for all your work and supporting our table
I see many great roms being unofficial. What is it needed to be official? And why some devs don't bother making it official?
Dev, thanks a lot! Great job! More better than LOS 17.:good:
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
...
TWRP
1. you can use the recovery created by @followmsi: https://forum.xda-developers.com/galaxy-tab-a/development/rom-20181008-t3851915
2. or you can use my version (this is repack 3.2.3 recovery with new kernel and fix mtp in recovery, I used it for develop after flash latest 8.1 official firmware with new bootloader)
SM-T580: https://drive.google.com/file/d/1RitUyjk6gfYsilXRVHC-Wl_61RmqZ57g/view?usp=sharing
SM-T585: https://drive.google.com/file/d/1t8ImEBfqlbkE7oVru4YTVLXa-UEq4rZC/view?usp=sharing
....
Click to expand...
Click to collapse
@followmsi took down his Omni6 TWRP and advised us to use the new official 3.3.1-0 from the TWRP website - yours seems older, so which is better?
Does crDroid Q have all the great options already that Pie had? And do we have to flash any firmware/vendor or can we simply clean flash from any existing Pie rom?
Thanks for your work and this rom :good:
No Vulkan available, can you please fix it like in other Ten Roms ?
Great Rom with look & feel like crDroid Pie. :good:
I did a clean install.
please after install rom and go into system
is there any need to make system-as-root (SAR)
and which version of gapps work without any bugs
any bugs in this rom please, cause i use rr 5.8.5 without any bugs at all
any advises pleeeeeeeeeeeeeeease?
rapidm said:
I see many great roms being unofficial. What is it needed to be official? And why some devs don't bother making it official?
Click to expand...
Click to collapse
For a ROM to be called OFFICIAL, the developer needs to build the ROM from source and provide regular weekly updatesand has to stick to the guidelines the developer team have setup.
Like for example LineageOS, the dev can't include a hack or work-around for some bugs in the ROM with a certain device.
For example with the Redmi Note 3, while there was a mod present to fix the flashlight issue, the dev himself couldn't include it in the ROM as it didn't comply with the LineageOS guidelines.
Every developer community, for e.g., LineageOS, RR, DU, OmniRom, AICP, MOKEE,......., have there own guidelines.
---------- Post added at 04:52 AM ---------- Previous post was at 04:43 AM ----------
fadiiiiii said:
please after install rom and go into system
is there any need to make system-as-root (SAR)
and which version of gapps work without any bugs
any bugs in this rom please, cause i use rr 5.8.5 without any bugs at all
any advises pleeeeeeeeeeeeeeease?
Click to expand...
Click to collapse
I had no problem installing Open_gapps-arm64-10.0-nano-20191006-BETA.zip an was able to setup the tablet without any errors.
Didn't do the SAR thing as I don't need root, as I use the tablet for browsing and watching streams
---------- Post added at 04:55 AM ---------- Previous post was at 04:52 AM ----------
Nimueh said:
Does crDroid Q have all the great options already that Pie had? And do we have to flash any firmware/vendor or can we simply clean flash from any existing Pie rom?
Thanks for your work and this rom :good:
Click to expand...
Click to collapse
I flashed it directly with a full wipe, my previous rom was Bootleggers ROM 4.3 Pie and didn't incounter any problems.
It has allot of options just like the pie version, don't know if they are all there but there is enough to choose from.
is there any need to make system-as-root (SAR) to root with magisk 20?
fadiiiiii said:
is there any need to make system-as-root (SAR) to root with magisk 20?
Click to expand...
Click to collapse
I don't need root but I tried it for you.
I just tried to install magisk in the normal way and it didn't give any errors.
After it I tested to see if it past safety net and it did.
After that I installed adaway and that requested root like normally and I gave it access.
But when it tried to install the host files it failed.
When I try to read the buildprob with a root file explorer, that works like normally after granting rood.
So maybe adaway needs the sar method, or it doesn't work with android 10 yet.
RichyE said:
After that I installed adaway and that requested root like normally and I gave it access.
But when it tried to install the host files it failed.
Click to expand...
Click to collapse
Go into Adaway's settings and select systemless, then it works fine.
I flashed crDroid earlier and for a 1st build it looks pretty good. It has some of crDroid's options, but not all of them. For example no option for smartbar under navigation and no way to modify recents to have the rambar or at least the clear all button. I installed a couple of launchers (Lawnchair, Hyperion + OPLauncher2) to use with Quickswitch in an attempt to get different recents, but Quickswitch complained with all 3 of them that this version wasn't supported
Settings crash when trying to change the hardware button layout - I wanted to put Screenshot on long-press since there's no smartbar, but Settings wasn't having any of it
Oh and an oddity: When I plug the device in to charge the screen lights up like it should ... but if I simply walk away it will go dark after the 30 seconds timeout and then light up again, rinse + repeat. I had to actually turn off the screen with the power button to get it to stay off while charging ... I've never seen THAT before, so no idea what's causing it.
@Valera1978 - your link behind "For now i'm using gapps from" in the OP doesn't work, maybe you can fix it?
Wake-on-Home works, Volume wake didn't and then it did but that's the same behaviour we had on some Pie roms already.
That's it for now ... not sure if I'll stay on this one or go back to my Pie rom, but it's definitely usable already - thank you @Valera1978 :good:
Nimueh said:
Go into Adaway's settings and select systemless, then it works fine.
Settings crash when trying to change the hardware button layout - I wanted to put Screenshot on long-press since there's no smartbar, but Settings wasn't having any of it
Oh and an oddity: When I plug the device in to charge the screen lights up like it should ... but if I simply walk away it will go dark after the 30 seconds timeout and then light up again, rinse + repeat. I had to actually turn off the screen with the power button to get it to stay off while charging ... I've never seen THAT before, so no idea what's causing it.
Click to expand...
Click to collapse
Thanks that did the trick with adaway, but the setting doesn't stick.
Not a big problem just have to set it again when I want to update.
I can confirm the settings crashing when you try to change the buttons.
I just used my charger but I didn't notice the light going on and off.
RichyE said:
Thanks that did the trick with adaway, but the setting doesn't stick.
Not a big problem just have to set it again when I want to update.
I can confirm the settings crashing when you try to change the buttons.
I just used my charger but I didn't notice the light going on and off.
Click to expand...
Click to collapse
Thanks for pointing that out about Adaway, I hadn't noticed - but yes, it does it here too and for some odd reason adblocking was disabled again after a reboot.
I tried it a few times now - if I turn on the screen and then let the device sit there, the screen will go off after the selected timeout (30 seconds here), but then the screen will come back on after a second or 2. Then it goes off again after 30 seconds and comes right back on. This will keep going indefinitely unless I turn the screen off manually with the power button. Plus I just noticed that it isn't only when charging but all the time ... very odd, like something is waking the screen again right after it goes off. I definitely didn't have that on my previous Pie rom and my phone with crDroid Pie also doesn't do it. I'm stumped
Edit: I think I found the culprit that keep waking up my screen :victory:
On the tablet I use a free SIM card with free monthly data that's sponsored by advertisements. It has it's own lockscreen which doesn't even show up here on Q but did on Pie. If I "freeze" that app with TiBu my screen turns off as it should - but without that app installed I won't get my free data each month.
No idea if this is a Q issue or a crDroid one, but something must be blocking the app lockscreen and causing this odd behaviour. I'll have to see if I still get my free data allowance when the app is installed but not using it's lockscreen ... otherwise I'm going back to Pie. :fingers-crossed:
@Valera1978
After 1 Day of heavily testing Games, Videos, Youtube, Internet i can say, this is the Best 10 Rom for (my) 580's.
Big Thx again for your great Work. :good:
Please add Vulkan like in Lineage or RR Ten.
hello installing the rom but boot stuck on the crdroid logo
wipe / cache after installation however
an idea ?
33fcgb said:
hello installing the rom but boot stuck on the crdroid logo
wipe / cache after installation however
an idea ?
Click to expand...
Click to collapse
Did you install anything else to other then the rom?
is this rom very good for daily use pleeeeease?
any bugs please?
just the rom installed cleanly but remains stuck on the logo crdroid at startup
33fcgb said:
just the rom installed cleanly but remains stuck on the logo crdroid at startup
Click to expand...
Click to collapse
I would try:
- install the official TWRP page(Link: https://forum.xda-developers.com/showpost.php?p=80692007&postcount=672)
- save all my data
- wipe all partitons
- reboot into TWRP
- format (not WIPE!!) /data partition
- reboot into TWRP
- install only rom and boot
If rom boots normal, thenn install gapps...
installing the rom only cleanly starts works but when I want to add the gapps remains stuck on the logo cr droid
Why ?
ps: I tested with gapps indicated on this forum

[ROM][OFFICIAL][CrDroid][PIE]

crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
*****Disclaimer*****
Important note before proceeding!!!
The copy A/B partions zip is crucial in order to prevent bricks. It only needs to be done if your coming from the stock ROM or you recently restored stock firmware manually. Other wise without it you can brick due to Motorola's A/B partition scheme.
Preparation for A/B Roms:
01. Download TWRP.
02. Remove your google account under Settings > Accounts then factory reset your device as FRP is enforced.
03. Unlock your bootloader
04. Use terminal to boot latest twrp.img "fastboot boot twrp.img"
05. While on Slot_A Flash copypartitions.zip (This step only needs to be completed Once only after updating from stock factory firmwares.)
06. While in TWRP choose Reboot > bootloader
07. Now you're ready for ROM Steps below
ROM - Installation:
01. Download the ROM.
02. Use terminal to boot latest twrp.img "fastboot boot twrp.img"
03. Wipe data, dalvik, system and internal storage, then format userdata.
04. Flash ROM.zip + TWRP_installer
05. Reboot > Recovery
06.Install Gapps + Magisk (if you choose)
07. Reboot > System
Updating (AKA 'dirty flash'):
01. Download the updated ROM
02. Boot into recovery
03. Install ROM.zip + TWRP_installer
04. Reboot > Recovery
05. flash gapps + Magisk (if you choose)
06. Reboot > System
Notes:
Any time your internal storage aka "Userdata" is from a stock install you must "format data" in recovery before using ROMS
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
LIST-KNOWN-ISSUES-ON-YOUR-DEVICE-HERE
None
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- ENTER-SPECIFIC-THANKS-HERE-IF-YOU-HAVE-THEM
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Device tree: https://github.com/Rondeau79/android...motorola_ocean
Vendor tree: https://github.com/Rondeau79/proprie...g/lineage-16.0
Download Link: https://androidfilehost.com/?w=files&flid=302315
AB copy partitions Download Link: https://androidfilehost.com/?fid=4349826312261636295
XDA:DevDB Information
CrDroid Pie, ROM for the Moto G7 Power
Contributors
Rondeau79
Source Code: https://github.com/crdroidandroid/android/tree/9.0
Kernel tree:https://github.com/Rondeau79/android_kernel_motorola_sdm632/tree/lineage-16.0
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest bootloader and TWRP recovery
Based On: Lineage OS
Version Information
Status: Stable
Current Stable Version: 5.11
Stable Release Date: 2019-11-25
Created 2019-11-27
Last Updated 2019-12-23​
Reserved
Thank you Rom is really stable and beautiful plenty of customization baked in. Been running it for 4 days no problems at all OTA is also working great two updates already love it
Thanks! I run it as my daily driver. My first official ROM! I have built plenty in the past, but decided to make the jump. As soon as a few bugs get straighten out I will be moving it to Android 10!
Just installed the rom a couple of hours ago, and damn it's good! Only a small problem though, when you make a screenshot the little menu that appears where you can edit and take extended screenshots closes after a few seconds on its own. Is this intended or a bug? If so I hope you can fix it in the next update. Thanks a lot for the rom!
badapple420 said:
Thank you Rom is really stable and beautiful plenty of customization baked in. Been running it for 4 days no problems at all OTA is also working great two updates already love it
Click to expand...
Click to collapse
Gabe29 said:
Just installed the rom a couple of hours ago, and damn it's good! Only a small problem though, when you make a screenshot the little menu that appears where you can edit and take extended screenshots closes after a few seconds on its own. Is this intended or a bug? If so I hope you can fix it in the next update. Thanks a lot for the rom!
Click to expand...
Click to collapse
You can change the animation speeds in developer options to slow down that screenshot options. That will allow that edit page to stay on your screen longer.
Rondeau79 said:
You can change the animation speeds in developer options to slow down that screenshot options. That will allow that edit page to stay on your screen longer.
Click to expand...
Click to collapse
I see, I set the duration scale to 0.5x so no wonder it closed so fast. Anyways is there a way to make opengl skia the default gpu renderer? Because it switches back to default after a reboot.
Gabe29 said:
I see, I set the duration scale to 0.5x so no wonder it closed so fast. Anyways is there a way to make opengl skia the default gpu renderer? Because it switches back to default after a reboot.
Click to expand...
Click to collapse
Flash the attached zip in recovery. It will take care of that.
Rondeau79 said:
Flash the attached zip in recovery. It will take care of that.
Click to expand...
Click to collapse
Thank you, it worked.
As it is getting regular updates I though I would give this ROM a try on my new G7 Power. To be honest it works much better than I expected, not seeing any stability problems and it has some nice features. Still testing, but will probably start using this ROM + phone as my daily.
I did however have a heck of a time installing and getting both the ROM and TWRP to boot on the phone. That mostly had nothing to do with this ROM and more to do with the A/B partitions thingy Google has done on recent phones (which I have grown to hate). Also the ROM's install instructions are a bit vague in parts, so there was a bit of a learning curve (for me at least).
One the upside everything I have tested so far works. Storage encryption is enabled by default and working, wifi works (even with hidden SSIDs), dual SIMS works, camera app works, fingerprint works , call quality seems good. SELinux is disabled, which is not good but I can live with.
A big thanks for the all the done work on this!!
joefidler said:
As it is getting regular updates I though I would give this ROM a try on my new G7 Power. To be honest it works much better than I expected, not seeing any stability problems and it has some nice features. Still testing, but will probably start using this ROM + phone as my daily.
I did however have a heck of a time installing and getting both the ROM and TWRP to boot on the phone. That mostly had nothing to do with this ROM and more to do with the A/B partitions thingy Google has done on recent phones (which I have grown to hate). Also the ROM's install instructions are a bit vague in parts, so there was a bit of a learning curve (for me at least).
One the upside everything I have tested so far works. Storage encryption is enabled by default and working, wifi works (even with hidden SSIDs), dual SIMS works, camera app works, fingerprint works , call quality seems good. SELinux is disabled, which is not good but I can live with.
A big thanks for the all the done work on this!!
Click to expand...
Click to collapse
Download terminal emulator
Su
setenforce 1
SeLinux will be enforcing
Hey @Rondeau79, thank you for the rom, this was actually the only one I was able to flash. (But I think the problem is on my side of the table
Is there any way to get rid of the google-parts of the rom (searchbar etc.)? Thx in advance!
[email protected] said:
Hey @Rondeau79, thank you for the rom, this was actually the only one I was able to flash. (But I think the problem is on my side of the table
Is there any way to get rid of the google-parts of the rom (searchbar etc.)? Thx in advance!
Click to expand...
Click to collapse
The search bar is apart of the launcher, it is based off the Lawn chair launcher. You could always not flash Gapps and use Aptoide as store for apps..
Any suggestions on the best way to use MicroG with this ROM? It's listed here https://forum.xda-developers.com/showpost.php?p=71042083 as having signature spoofing but I could not find it. cheers.
joefidler said:
Any suggestions on the best way to use MicroG with this ROM? It's listed here https://forum.xda-developers.com/showpost.php?p=71042083 as having signature spoofing but I could not find it. cheers.
Click to expand...
Click to collapse
Some ROMs have an option button built in. Others the option is just baked in, it will work.
joefidler said:
Any suggestions on the best way to use MicroG with this ROM? It's listed here https://forum.xda-developers.com/showpost.php?p=71042083 as having signature spoofing but I could not find it. cheers.
Click to expand...
Click to collapse
Go with the Xposed method. As of late CrDroid Pie dose not support it. That would have to be a custom build.
Thanks @Rondeau79 will try Xposed. MicroG's spoofing check does not detect signature spoofing.
---------- Post added at 02:56 PM ---------- Previous post was at 02:56 PM ----------
Thanks @Rondeau79 will try Xposed. MicroG's spoofing check does not detect signature spoofing.
This will be the first ROM I flash to my phone. Can wait to get it set up!
joefidler said:
Any suggestions on the best way to use MicroG with this ROM? It's listed here https://forum.xda-developers.com/showpost.php?p=71042083 as having signature spoofing but I could not find it. cheers.
Click to expand...
Click to collapse
WoofahRayet said:
This will be the first ROM I flash to my phone. Can wait to get it set up!
Click to expand...
Click to collapse
Any questions feel free to pm me!
Thanks again for this port o.p
Ive tried all roms accept omni and this rom by far exceeds expectations. The Best Gaming Rom ive used.
I dont know what changes were made from the kernel between the 11/19 build and the 11/28 build. But I got better performance with the 11/19 kernel so i lm using the 11/19 build boot.img on the 11/28 rom update.
Battery drain is less noticeable on the latest build as the 11/19 build was draining very fast.
Once one roots this rom with a few tweaks, one will see a huge boost in performance.
Resurrection Remix was my daily driver prior because of the Led Notification light in which i love on this phone. 
 @Rondeau79 can the notification light get added to CRDroid like on RR and Aospex...?cOther than that no bugs to report.
You rock o.p..!!!

[ROM][DISCONTINUED][cedric][11] StellarOS 1.1 "Bellatrix" #RideIntoCosmos

Warning: bugs and outdated SP ahead...
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Stellar OS is an optimized LineageOS-based Android aftermarket firmware with extra features, developed by people all over the world.
Quoting the LineageOS description:
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Click to expand...
Click to collapse
We offer vanilla and gapps variants. If you install a vanilla variant, the only supported Gapps package is MindTheGapps (gapps builds are not available for a few devices due to space issues).
Download & instructions:
Build 23th September 2021
• 1.1 source update (September SP + new features)
• Fixed fast charging display
Vanilla | Gapps
Old releases:
Spoiler
Build 12th August 2021
Initial release
If you are coming from an older build (beta testers), clean flash is required
Vanilla | Gapps
IMPORTANT: If you are coming from another ROM, you need to format data (there where you type yes in twrp).
IMPORTANT: OTA updates require enabling recovery update in Setup Wizard (or, if you already set your device up developer options) - they do not support TWRP.
About:
Features:
All Mint 2.1 features
September security patch
SafetyNet passing WITHOUT Magisk Hide
Many optimizations
New wallpapers & bootanimation
QS customization (tint, rows customizer, data usage)
Status bar customization (4G/LTE toggle, new NFC & VoLTE icons)
Kill app from notification
Notification pulse
KitKat-style notification ticker
Screenshot sound toggle
Per-app volume
WiFi & Bluetooth timeout
Stellar Tweaks customization section
Navbar Tuner
Improved Trebuchet+
OmniJaws weather service
Many lockscreen clocks
Statusbar ticker
Signed official builds
Smart Charging & Cutoff
Sensor, Wakelock and Alarm blocker
Battery info on lockscreen
Improved microG support (signature spoofing, location support)
...and more (we accept suggestions)
The focus for the inital release was an neccessary set of tweaks and optimizing android.
What's working:
WiFi
Camera and Camcorder
Bluetooth
Fingerprint - Oreo firmware required
GPS
OTG
Video Playback
Audio
RIL
VoLTE
USB tethering/audio
SELinux: Enforcing
Bugs:
You tell me
Sources are available at https://github.com/Stellar-OS and https://github.com/Stellar-Devices
Screenshots from ocean are attached
ROM OS Version: 1.0
ROM Kernel: Linux 3.18.140
ROM Firmware Required: Must be on latest Oreo Stock firmware
Based On: LineageOS 18.1
Version Information
Status: Stable
Current Stable Version: 1.0
SELinux Status: Enforced
Release Date: 15th August 2021
Thanks for letting us know- I'll have to try this! Will Mint 2.1 Seed vault backups be compatible with this new ROM?
doug888 said:
Thanks for letting us know- I'll have to try this! Will Mint 2.1 Seed vault backups be compatible with this new ROM?
Click to expand...
Click to collapse
I'm not sure, as this is a android version jump, but it's worth to try.
In instaled it, its working perfectly. No issues at all until now. Thank you so much for keeping my moto g5 alive
I have one minor issue. It seems TWRP has been replaced by lineageOS recovery. I would like to keep it that way in orer to receive updates. I would like to flash and install magisk though in order to hide root so I can work with MS Oulook and such. I do not see the option in lineageOS recovery. Can I boot into TWRP recovery from adb/fastboot, and then fash it? or are there other options?
listm said:
In instaled it, its working perfectly. No issues at all until now. Thank you so much for keeping my moto g5 alive
I have one minor issue. It seems TWRP has been replaced by lineageOS recovery. I would like to keep it that way in orer to receive updates. I would like to flash and install magisk though in order to hide root so I can work with MS Oulook and such. I do not see the option in lineageOS recovery. Can I boot into TWRP recovery from adb/fastboot, and then fash it? or are there other options?
Click to expand...
Click to collapse
It got replaced because you enabled the checkbox in setup wizard. Disable it in developer settings and install TWRP as normally.
nift4 said:
It got replaced because you enabled the checkbox in setup wizard. Disable it in developer settings and install TWRP as normally.
Click to expand...
Click to collapse
I missed that one. Thanks for the quick reply.
Issue solved. Sadly the microsoft company portal is aware of my device being rooted, this was also the case in android 10, but Ill work around it.
listm said:
I missed that one. Thanks for the quick reply.
Issue solved. Sadly the microsoft company portal is aware of my device being rooted, this was also the case in android 10, but Ill work around it.
Click to expand...
Click to collapse
Have you hidden magisk with a random package name in its settings?
Does your device pass ctsprofile?
If not install magisk hide props module and terminal emulator. Once installed type props in terminal emulator and change the fingerprint to a pixel 4 android 11
Also hide the app that detects root with magisk hide
TheFixItMan said:
Have you hidden magisk with a random package name in its settings?
Does your device pass ctsprofile?
If not install magisk hide props module and terminal emulator. Once installed type props in terminal emulator and change the fingerprint to a pixel 4 android 11
Also hide the app that detects root with magisk hide
Click to expand...
Click to collapse
Yeah, I did all that, I think
- Hidden Magisk, named it Settings
- It passes SafetyNet, and ctsProfile (evalType Basic)
- I did install hide props, ran the emulator and changed the fingerprint. That was new to me.
I have hidden everything of outlook, company portal, etc, but it still I get the error doing my device check in the business portal. As I said, I can work around it. I really appreciate you helping me out but don't bother if you're too busy ;-)
listm said:
Yeah, I did all that, I think
- Hidden Magisk, named it Settings
- It passes SafetyNet, and ctsProfile (evalType Basic)
- I did install hide props, ran the emulator and changed the fingerprint. That was new to me.
I have hidden everything of outlook, company portal, etc, but it still I get the error doing my device check in the business portal. As I said, I can work around it. I really appreciate you helping me out but don't bother if you're too busy ;-)
Click to expand...
Click to collapse
Unfortunately I don't use it else I would test it out and try get it to work
Hi nift4,
awesome work!
My Moto G5 works fine - I've noticed a very long boot time (5 minutes), though.
I did a cleanup with formatting system, data and vendor, before I flashed this image. Maybe to much?
regards, Andy
AndyFx12 said:
Hi nift4,
awesome work!
My Moto G5 works fine - I've noticed a very long boot time (5 minutes), though.
I did a cleanup with formatting system, data and vendor, before I flashed this image. Maybe to much?
regards, Andy
Click to expand...
Click to collapse
This is due to a slow driver, an issue that is known and present in all Android 11 builds for Moto G5, even official Lineage OS.
Idk if kernel 4.9 will get usuable any time soon, but that will hopefully resolve that issue.
listm said:
Yeah, I did all that, I think
- Hidden Magisk, named it Settings
- It passes SafetyNet, and ctsProfile (evalType Basic)
- I did install hide props, ran the emulator and changed the fingerprint. That was new to me.
I have hidden everything of outlook, company portal, etc, but it still I get the error doing my device check in the business portal. As I said, I can work around it. I really appreciate you helping me out but don't bother if you're too busy ;-)
Click to expand...
Click to collapse
Hide props is not needed on this rom, for general information. I built it into the source.
AndyFx12 said:
Hi nift4,
awesome work!
My Moto G5 works fine - I've noticed a very long boot time (5 minutes), though.
I did a cleanup with formatting system, data and vendor, before I flashed this image. Maybe to much?
regards, Andy
Click to expand...
Click to collapse
Formatting system and data is an good idea actually. It prevents leftovers (on system, some things like Gapps packages store restore scripts). Formatting vendor is useless. No harm done, just time wasted.
Thanks for your replies and explanation!
It's amazing to see Android 11 on such an "old" device!
regards, Andy
@nift4 Are you still working on kernel 4.9?
xenondroid said:
@nift4 Are you still working on kernel 4.9?
Click to expand...
Click to collapse
Yes. Jarl & wiktorek140 made it work near to perfect on montana and I am trying my best to replicate that on cedric. Jarl said he will only bringup 4.9 ports to LineageOS 19...
Flashed this to replace Mint 2.1 no problems. Even the Seedvault backup worked. Battery seems to last longer too. One strange thing I'm experiencing since I flashed Stellar is that whenever I reboot my phone I get 5 text messages within a couple of minutes from O2 (my mobile network operator) saying my number doesn't support Visual Voicemail. I've never used Visual Voicemail it in the past, wonder why I'm getting these messages?
Thanks
doug888 said:
I've never used Visual Voicemail it in the past, wonder why I'm getting these messages?
Click to expand...
Click to collapse
Probably because it's enabled by default in Android 11. You can disable it in Dialer settings, I think.
Thanks! That worked
Hi,
Thank you for your work !
My questions may be slightly off-topic... and from a newbie but I am wondering why SafetyNet is OK on this ROM (checked with an application, without Magisk installed) BUT some applications still refuse to work or complain :
- WhatsApp just warns my device is not supported
- HID Approve (an MFA auth. app) refuses to run
- My banking app refuses to enable basic features at launch
What kind of checks have been implemented within these applications (are they well-known ?) and is there a way to workaround these issues ?
Otherwise, I could relock my bootloader and reinstall Oreo Stock but I tried many times a few months ago and never managed to do it without losing my IMEIs (I have not done EFS backups before installing MintOS...). Any suggestion to make this work without buying another phone ?
Thank you !

[ROM] LineageOS 20.0 UNOFFICIAL - 1.2 [2023-05-06]

LineageOS 20.0 for Sony Xperia XZ1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ1, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything (preferably dmesg and logcat).
DOWNLOAD
You can download the latest releases here:
poplar (G8341):
https://sourceforge.net/projects/yoshino/files/poplar/twrp/
https://sourceforge.net/projects/yoshino/files/poplar/lineage-20.0/
poplar_dsds (G8342):
https://sourceforge.net/projects/yoshino/files/poplar/twrp/
https://sourceforge.net/projects/yoshino/files/poplar/lineage-20.0/
poplar_canada (G8343):
https://sourceforge.net/projects/yoshino/files/poplar/twrp/
https://sourceforge.net/projects/yoshino/files/poplar/lineage-20.0/
poplar KDDI (SOV36)
https://sourceforge.net/projects/yoshino/files/poplar/twrp/
https://sourceforge.net/projects/yoshino/files/poplar/lineage-20.0/
RECOMMENDED GAPPS (others works too)
https://androidfilehost.com/?w=files&flid=322935
INSTALLATION
Before first install: flash and boot into the TWRP provided in this thread, format data, reboot to recovery and wipe all internal partitions, then flash the ROM, GApps and root (if needed).
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
When updating from previous builds, simply dirty flash the ROM is enough, decryption in new TWRP works now
Recommended GApps: MindTheGapps provided in this thread.
KNOWN ISSUES
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
Currently, LOS isn't feature complete yet, so some things, buttonn, advanced menù etc. may be still missing
You tell me...
Contributors
derf elot, modpunk, Rooted_Ansh
Source Code
poplar: https://github.com/whatawurst/android_device_sony_poplar
poplar_dsds: https://github.com/whatawurst/android_device_sony_poplar_dsds
poplar_canada: https://github.com/whatawurst/android_device_sony_poplar_canada
poplar_KDDI: https://github.com/whatawurst/android_device_sony_poplar_kddi
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2023-05-06
ALL CREDITS TO DERF ELOT AND THE OTHER DEVS BEHIND THE ROM, I'M ONLY POSTING IT.
---------------------------------------
Changelogs:
v1.2 (2023-05-10):
- Updated to T QPR2 release (LineageOS upstream)
- Updated to May 2023 Security updates (both ROM and kernel)
- Our kernel now includes updates by CIP and is up-to-date with tag st40 - thanks also to Flamefire for help with some of these (1)
- Reduced zram size to 25% (1gb) of out total RAM to have more to use freely
- Updated BT stuff for QPR2 (maybe offloading is working again? needs confirmation)
- Added the option to reflash the mbn via OpenCS (see Xperia Parts) - thanks also to shank03 & Flamefire (2)
- Fully enabled IMS on Congstar Germany via overlay on lilac
- Possibly some battery/performance optimizations here and there
- Fixed Android Auto support
- Added new LineageOS "Charging control hal" for battery charging care (3)
- Maybe more I forgot...
(1) The CIP kernel includes fixes for issues and security vulnerabilities from 4.14 kernel (see https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip.git)
(2) A somehwat lengthy explanation: This option is off by default on fresh installs. When upgrading, this should be enabled because we enforced this for everybody previously. However, this option is only required for certain carrier mbns that enable IMS. Personally, I know that the O2/Telefonica Germany mbn needs this, otherwise you get a crashing modem at every boot (unless you switch to 3g before rebooting and back to LTE after boot). I generally recommend playing with this option, and if you don't need it (e.g. modem doesn't crash on boot), just keep it off - like mentioned before, this is now the default behavior of OpenCS on fresh installs anyway.
(3) This is not finalized or merged upstream is LineageOS yet, but seems like a nice feature to have and test drive already. Some bugs may be possible.
v1.1 (2023-01-08):
Updated to T QPR1 release (LineageOS upstream)
New default camera app (LineageOS upstream) - yes, we cannot change video fps currently (thanks Sony!)
Any other updates by LineageOS upstream
Kernel security updates (also thanks to Flamefire)
Dropped keyprovd service - it is useless on unlocked BL anyway
Show 4G instead of LTE icon - saves some space too
Enable IMS by default - this still only works if carrier is supported
Fix some selinux denials (also thanks to Flamefire)
Fixup ViLTE dependencies - this might in theory work again, but it's not enabled yet
v1.0 (2022-10-02):
Initial release
Can’t wait to try it !!! Thanks tux
Can i flash this using old twrp version like 3.6.2 - 9?
The rom is great but every time the device reboots and finishes the boot animation it repeats one more time boot animation.
According to the picture, I can't scroll down as usual, can only use those 4 buttons @@ until rebooting (I had landscape rotation to watch youtube then rotate the screen again when the video ends and it's like that
).
rarely but the sound doesn't play even if i keep the volume high or switch to listening to music or watching youtube until the device is restarted
(sorry if I said wrong or wrong grammar, I'm not very good at English. )
raffyei8ht said:
Can i flash this using old twrp version like 3.6.2 - 9?
Click to expand...
Click to collapse
No idea, but for internal memory decription the new one is needed.
Tux111 said:
No idea, but for internal memory decription the new one is needed.
Click to expand...
Click to collapse
What is the use of internal decription if you don't mind me asking
raffyei8ht said:
What is the use of internal decription if you don't mind me asking
Click to expand...
Click to collapse
By default android protect (encrypt) your internal memory. TWRP lacked decryption for a long time, now its supported. This means, with new recovery, you can see and manage your internal memory via TWRP using your lockscreen password. Before, you simply can't.
The fingerprint sensor doesn't work, auto brightness is also not working, does anyone know how to fix it
Each time I reinstalled a rom, some function which worked just fine on that rom stopped functioning, do you guys know how to prevent this
This is a very good ROM. Good for daily use. Didn't encounter any problem. Can't wait for the Pixel Experience Android 13.
ecrissor said:
The fingerprint sensor doesn't work, auto brightness is also not working, does anyone know how to fix it
Click to expand...
Click to collapse
FP perfectly working.
ecrissor said:
Each time I reinstalled a rom, some function which worked just fine on that rom stopped functioning, do you guys know how to prevent this
Click to expand...
Click to collapse
I guess you have some missing files or something like that. Try reflashing stock rom and persist.img, something wrong with your files.
Maybe this is a dumb question, but what is the difference between the twrp provided here and the 'stock' twrp from twrp.me? Will both work?
Nice room
great work
poplar_dsds said:
Maybe this is a dumb question, but what is the difference between the twrp provided here and the 'stock' twrp from twrp.me? Will both work?
Click to expand...
Click to collapse
Both works but this one should be able to decrypt internal memory. No idea if the one from twrp.me does the same or if its the same file.
Tux111 said:
Both works but this one should be able to decrypt internal memory. No idea if the one from twrp.me does the same or if its the same file.
Click to expand...
Click to collapse
Okay i see, thank you! I updated to your version of twrp and dirty flashed the rom from 19.x to this version, worked great, even with apps and so on!
Also thanks for the ROM!
Hi there,
I'm a complete noob on XDA, but I just flashed this TWRP (twrp-3.6.2_12-0-20221002-poplar) over another TWRP (twrp-3.7.0_9-0-poplar) and now, when entering recovery mode I get stuck in loading screen of teamwin Recovery Project 3.6..2_12-0
I can get out of loading screen by pressing all buttons, and device turns off.
I rebooted into fastboot and flashed back the 3..7 TWRP and now things are back to normal.
Any sugestions on what I can do to install this TWRP?
xdatomsgmail said:
Hi there,
I'm a complete noob on XDA, but I just flashed this TWRP (twrp-3.6.2_12-0-20221002-poplar) over another TWRP (twrp-3.7.0_9-0-poplar) and now, when entering recovery mode I get stuck in loading screen of teamwin Recovery Project 3.6..2_12-0
I can get out of loading screen by pressing all buttons, and device turns off.
I rebooted into fastboot and flashed back the 3..7 TWRP and now things are back to normal.
Any sugestions on what I can do to install this TWRP?
Click to expand...
Click to collapse
So, I was able to install lineage-20.0-20221002-UNOFFICIAL-1.0-poplar.zip from this post using TWRP 3.6..2_12-0, without problems.
Did not try to flash twrp-3.7.0_9-0-poplar again.
Is there a thread with future requests? I would like the default browser not to default to google, as the whole point for me is to de-google my phone.
Hi, so I've been absent from Custom Roms for the last couple years - since I got my XZ1 and the DRM key extraction was too much of a hassle for me as I didn't miss much from the stock rom.
Since I got some spare time over the years I was thinking to finally tackle that topic, but I have two questions:
1) The opening post says this
Tux111 said:
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
Click to expand...
Click to collapse
is it even still relevant for me to back up my DRM keys / back up the TA partition if I don't want to go back to stock? what camera are you using then? is the quality comparable? is slow motion still possible?
2)
i know that in the past, safety net checks were just looking for bootloader / root, but they changed to checking if the ROM is signed with a proper signingkey, right? is this rom signed with a non-test-key?
I've got a couple of banking apps on my phone and it would obviously prevent it from being a daily driver if they were not supported anymore :/
Thanks in advance!
New LOS Update 1.1 is here! Enjoy!
xdatomsgmail said:
So, I was able to install lineage-20.0-20221002-UNOFFICIAL-1.0-poplar.zip from this post using TWRP 3.6..2_12-0, without problems.
Did not try to flash twrp-3.7.0_9-0-poplar again.
Is there a thread with future requests? I would like the default browser not to default to google, as the whole point for me is to de-google my phone.
Click to expand...
Click to collapse
By default the browser isn't Google Chrome afaik, so i don't see the problem. Also, tbh, this makes no sense considering Android=Google. Chromium is builded inside the ROM,is part of the ROM,so once you install Android, you are installing something from Google. So i don't get it.
If you don't install gapps, then you don't have Chrome as default browser. Otherwise, flash gapps and remove Chrome.

Categories

Resources