Hola a Todos, Este es el proceso de actualización a Android Pie (Soak Test)
Esto no sería posible sin el apoyo y colaboración de los miembros del grupo "evert "
"Entre todos podemos hacer las cosas posibles"
Primero que nada, debemos tener el Bootloader Desbloqueado lo cual pueden conseguir desde cualquiera de estos dos Post
Unlock Bootloader (English & Español)
Preparing-to-unlock-bootloader-t3854240
Luego bajar la Rom Stock con la compilación: OPWS27.113-89-2
Descargar
Seguido de esto bajar los archivos Ota´s
Descargar
No nos olvidemos de los archivos ADB y Los Drivers de Motorola
Hilo: Minimal ADB and Fastboot
ADB Descarga Directa
Drivers
Y de paso los BootLogos
Instalador Automatico BootLogo (Blanco y Negro)
Una vez con todos los archivos ya descargados, procedemos a meterlos a una sola carpeta, para así utilizarlos mas rápidamente.
Descomprimir La ROM 89-2, y adb en una sola carpeta
Ejecutar el Archivo " flash rom.bat
Conectar el Teléfono en modo fastboot y esperar
Saltamos toda la configuración sin permitirle conectarse a Internet
Descomprimimos el zip con las otas y pasamos el archivo mas grande 27.----- a la memoria del teléfono
Nos vamos a permisos de Apps -> Almacenamiento -> Mostrar Sistema -> Activamos, desactivamos y activamos "Actualización de Motorola"
Nos debería aparecer el menú de actualización, si no es así vamos a actualizaciones y aparecerá
Dejamos que se instale y reiniciamos
Ahora ponemos los demás archivos en la memoria interna y automáticamente las actualizaciones serán detectadas, las instalamos y ya.
Después de Instalar todas las actualizaciones, hacemos un hard reset.
Si queremos quitar el anuncio de Bootloader, descomprimimos el zip con los Logos y elegimos el blanco o negro y ejecutamos el ".bat" correspondiente (Importante no usarlo antes o dará error en el proceso de actualizaciones)
Root:
Lo conseguimos con Magisk
Pasamos el zip a la memoria externa (la interna esta encriptada) y ponemos el teléfono en modo fastboot
Descargamos el Recovery y lo ejecutamos
Download TWRP ejecutable
Instalamos el Zip y reiniciamos, en dado caso que presente errores o no aparezca repetimos el paso anterior.
English
Hi Everyone, This is the update process to Android Pie (Soak Test)
[FONT= "Century Gothic"] This would not be possible without the support and collaboration of the members of the "evert" group [/FONT]
"We can do all things together"
First of all, we must have the Unlocked Bootloader which can be obtained from any of these two Post
Unlock Bootloader (English & Español)
Preparing-to-unlock-bootloader-t3854240
Then download the Stock Rom with the compilation: OPWS27.113-89-2
Download
Download the Ota's files
Download
Let's not forget the ADB files and Motorola Drivers
Thread: Minimal ADB and Fastboot
ADB Direct Download
Drivers
And of course the BootLogos
BootLogo Automatic Installer (Black and White)
Once with all the files already downloaded, we proceed to put them into a single folder, so they can be used more quickly.
Unzip ROM 89-2, and adb in a single folder
Run the File " flash rom.bat
Connect the phone in fastboot mode and wait
We skipped all the configuration without allowing you to connect to the Internet
Unzip the zip with the otes and pass the largest file 27 .----- to the phone's memory
We go to Apps permissions -> Storage -> Show System -> Activate, deactivate and activate "Motorola Update"
We should see the update menu, if not, let's go to updates and it will appear
We let it install and restart
Now we put the other files in the internal memory and automatically the updates will be detected, installed and now.
After installing all the updates, we do a hard reset.
If we want to remove the announcement from Bootloader, unzip the zip with the Logos and choose the white or black and execute the corresponding ".bat" (Important not to use it before or give an error in the update process)
Root:
We got it with Magisk
We pass the zip to the external memory (the internal one is encrypted) and we put the phone in fastboot mode
Download the Recovery and execute it
Download TWRP executable
We install the Zip and reboot, in case it presents errors or does not appear we repeat the previous step.
OTA files need permission to download
AparecidoFaro said:
OTA files need permission to download
Click to expand...
Click to collapse
I'm uploading the file again, but it might take a while
Miiiis said:
I'm uploading the file again, but it might take a while
Click to expand...
Click to collapse
Can not you just put the file as public?
AparecidoFaro said:
Can not you just put the file as public?
Click to expand...
Click to collapse
The link is not mine, I can not change it
give me two hours and the link will be updated
Miiiis said:
The link is not mine, I can not change it
give me two hours and the link will be updated
Click to expand...
Click to collapse
Got it. All right then, no problem.
Guys, it looks like the stable update has been released in India
https://support.motorola.com/in/en/solution/MS136260
OTA links are not working...
ColaDeveloper said:
OTA links are not working...
Click to expand...
Click to collapse
new links
Thank you. I'm downloading and I will test it. I hope it will work.
I put a massive warning out here for anyone that's going to install this. First of all, with the public version rollout probably very soon, you should ask if it's worth it to install the soak because you have to go back to stock oreo for the official pie ota.
But aside from that, i'm putting a warning here as there have been people bricking their device with the soak.
Obviously, bricking is always a risk factor when your flashing things but i don't know if there will eventually be a fix for those that end up bricked. Do with your device whatever you want but keep this in mind. Yes you get stock pie with soak, but consider if the risk taken is worth the gain.
Miiiis said:
new links
Click to expand...
Click to collapse
Can't seem to open the rar file in the new link. Anyone else having this problem?
The OTA link does not work
The update for Moto G6 plus is started to rolling out buth good take wail before its on youre phone avalbe..
https://www.talkandroid.com/335911-moto-g6-android-pie/
Boot logo fails
Awesome! I flashed this on my Moto G6 plus and it worked, took 30 minutes while all the updates where installing.
I've got this message while running Bootlogo Moto G6 Plus White-Black in fastboot:
Code:
C:\G6+\platform-tools_r28.0.1-windows\platform-tools\roms\stock\Pie\Bootlogo Moto G6 Plus White-Black\Bootlogo Moto G6 Plus>White.bat
C:\G6+\platform-tools_r28.0.1-windows\platform-tools\roms\stock\Pie\Bootlogo Moto G6 Plus White-Black\Bootlogo Moto G6 Plus>fastboot flash logo logo_white.bin
(bootloader) partition-typ: not found
(bootloader) max-download-sizego: not found
target didn't report max-download-size
sending 'logo' (2071 KB)...
(bootloader) Requested download size is more than max allowed
FAILED (remote failure)
finished. total time: 0.007s
Also every time I boot the phone it sends a message in yellow saying: "Verity mode is set to disabled"
Thank you for your work!
Google phone work? Direct from the play store?
angelpradomx said:
Awesome! I flashed this on my Moto G6 plus and it worked, took 30 minutes while all the updates where installing.
I've got this message while running Bootlogo Moto G6 Plus White-Black in fastboot:
Also every time I boot the phone it sends a message in yellow saying: "Verity mode is set to disabled"
Thank you for your work!
Click to expand...
Click to collapse
Hello, what firmware version were you on? I'm on 89-5 and I'm not sure if downgrading to 89-2 can cause bricks
Related
Hello friends a salute to this great community, I am writing to make a query Y200 acquired a Huawei Ascend (U8655-51) here in Venezuela the problem is that one of the bad features of this is that it has very little internal space I have this app installed because memory is full and it is saying it has little disk space now the question is how this team rooteo to put the linksd2 and to activate the partition and others in order to have more space there is a Statute for a site German but nothing does not work on my computer I have done several times and does not work in advance thanks for any help greetings hope one response
Tutorial
albertwesker17 said:
Hello friends a salute to this great community, I am writing to make a query Y200 acquired a Huawei Ascend (U8655-51) here in Venezuela the problem is that one of the bad features of this is that it has very little internal space I have this app installed because memory is full and it is saying it has little disk space now the question is how this team rooteo to put the linksd2 and to activate the partition and others in order to have more space there is a Statute for a site German but nothing does not work on my computer I have done several times and does not work in advance thanks for any help greetings hope one response
Click to expand...
Click to collapse
Hi, Albert, I think you are the one who did this tutorial. THANKS :highfive: . It worked for me; XDA is the most known comunity so I think you should post it here too...
Mensaje original:
"(…) Download the application "Y200ToolBox".
Then, configure the device
> Settings -> Applications -> Quick Restart (uncheck)
> Settings -> Applications -> Development -> USB debugging (enable)
Adb drivers installed connect the device and given the option to finish installing the phone disconnected).
Turn off the device, remove the battery a few seconds then put back. Get the device in Fastboot with the combination of the [Volume-/ Power] during 15sec until it stay stuck in the logo
Connect the device to the PC and run the software
Select the Root + CMW
It takes a few seconds to work, do not touch anything.
It takes a while because the software will be doing some work, but it tells you when the process is finished completely and boot.
And you'll be already root users”
It work perfect for me for rooting, CMW I’m still trying, and when I get it I’ll post it. I hope it will work for everybody.
All credits to the friends in MyHuawei.net for the creation of the tool”
“Root Huawei Y200 Modelo U8655-51
Para los que no han podido ser Root en este modelo con otros métodos (no discrimino ni digo que no funcionan solo es otra alternativa)
Descargamos la aplicación Y200ToolBox al final dejo el link
Luego configuran el dispositivo
Configuración -> Aplicaciones -> Reinicio rápido (desmarcar)
Configuración -> Aplicaciones -> Desarrollo -> Depuración USB (activar)
Instalan los drivers adb, conectan el dispositivo y les dará la opción de instalarlos al terminar desconectan el teléfono
Apagan el dispositivo sacan la batería unos segundos luego la colocan de nuevo encienden el dispositivo en Fastboot con la combinación de las teclas [Volumen- / Poder] durante 15seg se quedara estancado en el logo
Conectan el dispositivo a la PC y ejecutan el software
Selecciona la opción Root + CMW
Dejan que trabaje se tardara unos segundos NO TOQUEN NADA
Lo dejan un rato ya que el soft. Estará haciendo unas tareas más el avisara cuando todo el proceso haya terminado completamente se apagara y encenderá nuevamente
Y listo ya serán usuarios Root"
A mí me funciono perfectamente para el Root, aunque el CMW todavía no me funciona. Si lo consigo lo pongo bueno espero que les sirva a los que tienen este equipo que a mi parecer es muy bueno
Todos los créditos por la creación de la herramienta a los amigos de MyHuawei.Net”
Click to expand...
Click to collapse
IMPORTANT/IMPORTANTE:
When I used the tool it didn’t work, so I navigated to the install directory Programs Files/MyHuawei.Net and I found a BAT file: “root.bat” that I ran and did the job, it took like 5 minutes. Follow the steps in the Albert tutorial, and run “root.bat” instead of the “Y200ToolBox.exe” if this happens to you. Wait a while, then the phone will boot unrooted, wait a little more and it will boot again by itself and do the Root. :victory:
The error message was like: It’s not a win32 valid application.
Cuando usé la herramienta no funcionó, así que abrí el directorio de instalación Archivos de Programa/MyHuawei.Net y encontré un archivo BAT: “root.bat”, que corrí e hizo el trabajo, tomó como 5 min. Sigan las instrucciones de Albert en su tutorial y corran “root.bat” en vez de “Y200Toolbox.exe” si les ocurre. Esperen un poco, el teléfono se reiniciará sin privilegios Root y luego se reiniciará de nuevo y finalizará el rooteado.
El mensaje de mi error fue algo como No es una aplicación win32 valida.
XDA doen't let me post the link. Search "Y200ToolBox" in google.
XDA no me deja postear el link. Busquen "Y200ToolBox" en google.
tutorial made by albertwesker at Htcmania
tutorial hecho por albertwesker en Htcmania
I discovered the solution to the error by myself, any questions please ask.
La solución a el error de la aplicación lo descubrí por mi cuenta, cualquier cosa pregúntenme.
thanks
it achieves exactly is mine and quice compratir as I did for this team they have not remembered thanks for bringing xda but I had no problem but brought greetings friend
l7wahn said:
IMPORTANT/IMPORTANTE:
When I used the tool it didn’t work, so I navigated to the install directory Programs Files/MyHuawei.Net and I found a BAT file: “root.bat” that I ran and did the job, it took like 5 minutes. Follow the steps in the Albert tutorial, and run “root.bat” instead of the “Y200ToolBox.exe” if this happens to you. Wait a while, then the phone will boot unrooted, wait a little more and it will boot again by itself and do the Root. :victory:
The error message was like: It’s not a win32 valid application.
Click to expand...
Click to collapse
i follow the instruction.
> usb debug
> uncheck fast boot
> successfully install and connect adb driver
> Turning off the device, remove the battery a few seconds then put back. Get the device in Fastboot with the combination of the [Volume-/ Power] during 15sec until it stay stuck in the logo
Connect the device to the PC and run the software
here, i follow your instruction in running "root.bat" in the myhuawei.net because i found "It’s not a win32 valid application."
after that it ran the bat file, about 1 minute my pc restarted
> i wait until it works again but it doesn't.
> there's windows error message
where and what are my mistakes?
thanks
Answers
bakuradits said:
i follow the instruction.
> usb debug
> uncheck fast boot
> successfully install and connect adb driver
> Turning off the device, remove the battery a few seconds then put back. Get the device in Fastboot with the combination of the [Volume-/ Power] during 15sec until it stay stuck in the logo
Connect the device to the PC and run the software
here, i follow your instruction in running "root.bat" in the myhuawei.net because i found "It’s not a win32 valid application."
after that it ran the bat file, about 1 minute my pc restarted
> i wait until it works again but it doesn't.
> there's windows error message
where and what are my mistakes?
thanks
Click to expand...
Click to collapse
Why did your pc restarted? or do you mean your Device?
This is what the root.bat do:
first it erase the recovery image and flash an image with cwm (step that will make your device to not get into the recovery any more... There's a solution)
second it flash the y200recovery.img that is in the y200toolbox directory
third it boots
then when the device boots into the android software and you see the loader, or the lock (depending on your configuration) it will run a shell in adb that will get the superuser.apk in the /system directory. If you're using an Huawei u8655-51, there will be not a chance to damage anything if your pacient.
last it sends the adb reboot command to the phone and the phone boots rooted.
Know, make all things again, but wait until the command promt shuts itself.
Alfredohs esto es para ti:
si dañaste el proceso de inicio es porque tal vez usaste otro ".bat" en el directorio. Esto va a dañar el boot.img de tu teléfono, debes usar el stockkernel.bat en modo fastbot para restaurarlo.
If you damaged the booting process in the phone it might be because you used another ".bat" in the directory. Which will change the boot.img so you should use the stockkernel.bat whit the device in fastboot mode to restore it.
Hi... I have used "Y200ToolBox" to root my phone, but it seems something went wrong. I tried to do it again, but while I restart the phone it restarts to CWM recovery. I don't know when this happened. So I think I disconnected the phone before the rest of the process completed the first time I tried, I mean the rooting part... Can you help me to solve this?
--------------------------------------------------------------------
Hola, he usado "Y200ToolBox" para rootear mi fone, pero parece que algo salió mal. Intenté hacerlo de nuevo, pero mientras reinicio el fone este se va al CWM recovery. No sé cuando pasó, así que pienso que lo desconecté antes de que cumpliera el resto del proceso la primera vez que lo hice, me refiero a la parte del rooting... Me podrían ayudar a resolver esto?
Huawei ascend y200 FM apk required
Hi
I rooted my Huawei ascend y200 and accidentally removed the FM application. If you have the apk please share it
this rom is for those users users who asked me for root in stock, this rom has limo kernel on it is 90% stock i just remove the knox and deodex it to enable the modding by xposed
features:
Stock 100%
deknoxed
deodexed
limo kernel for great performance and battery life
root selector in aroma installer
How To install:
if you are coming from other rom ( like limonade or notep ) just make a full wipe and install the rom and the CSC.zip then reboot and enjoy.
1° must have latest firmware installed FOR M variant( search for it )
2° install my modded bootloader ( via odin ) : Bootloader
3° install TWRP ( via odin ) : TWRP 7.0
4° must have downloaded the rom in the SD card
5° open twrp and make a full wipe ( dalvik, cache, system, internal memory and data )
6° install the rom and csc.zip then restart and enjoy
Download:
Stock Rom
CSC file
ROM OS Version: 7.0.x Nougat
ROM Kernel: Linux 3.18.14
ROM Firmware Required: Stock Nougat Android 7.0
Status: Stable
Created 24-04-2018
Last Updated 24-04-2018
reserved
another one
You the real mvp
thank you , very work. nice room.
Genio!!!!
Muchas gracias por tu esfuerzo y la dedicacion!!!!
Encantada con tu trabajo! Muchas gracias por todos los aportes.
Tengo un problema luego de que flasheo el recovery twrp, despues de que dice PASS en odin y lo reinicio en modo recovery no me redirecciona a twrp, se pone la pantalla azul e dice Installing updates, luego error y me manda al recovery común, luego cuando intento hacer wipe me dice e failed to mount /efs . Tendrias alguna idea de porque?
Desde ya, muchas gracias
Jacqueline roballo said:
Encantada con tu trabajo! Muchas gracias por todos los aportes.
Tengo un problema luego de que flasheo el recovery twrp, despues de que dice PASS en odin y lo reinicio en modo recovery no me redirecciona a twrp, se pone la pantalla azul e dice Installing updates, luego error y me manda al recovery común, luego cuando intento hacer wipe me dice e failed to mount /efs . Tendrias alguna idea de porque?
Desde ya, muchas gracias
Click to expand...
Click to collapse
es probable que la versión de twrp que estas instalando no sea la correcta o estes haciendo mal el procedimiento, te invito a leer el post y realizar los pasos al pie de la letra, cualquier cosa, me puedes contactar por aqui mismo o porm ensaje privado TWRP para j5 Prime
will it work with sm-g570f ?
jhotayex said:
will it work with sm-g570f ?
Click to expand...
Click to collapse
read carefully the text in title and tell me if you see a f there
you don't have to a b×××× about...i just brought galaxy j5 prime and i have just little knowledge about this ddevices. many device support similer verient rom,so I just asked you from this prospective.you could just replay with you or no.
Es necesario hacer un wipe all incluso si ya tenia la stock??
Me pasa lo mismo
Cuando intento actualizar la rom .. me dice que solo oficial release de recovery puede ser instalada... y nada queda la que me vino orginal... j5 prime actualizado a junio 2018 con la oficial. Android 7.0.
Mil gracia x tu ayuda
tutibreaker said:
es probable que la versión de twrp que estas instalando no sea la correcta o estes haciendo mal el procedimiento, te invito a leer el post y realizar los pasos al pie de la letra, cualquier cosa, me puedes contactar por aqui mismo o porm ensaje privado TWRP para j5 Prime
Click to expand...
Click to collapse
Hi!
I know this post is a little old but I tried installing the ROM and now my phone is stuck on the SAMSUNG logo, it won't go on from there. I can turn it on in recovery mode but after wiping it several times and installing the .zip files countless times, it still won't work. Any suggestions?
migueldp4 said:
Hi!
I know this post is a little old but I tried installing the ROM and now my phone is stuck on the SAMSUNG logo, it won't go on from there. I can turn it on in recovery mode but after wiping it several times and installing the .zip files countless times, it still won't work. Any suggestions?
Click to expand...
Click to collapse
You must enter in download mode and flash stock rom from sammobile to try again ....
This Tutorial I'm doing to get root on our device, I know there are several similar threads, so I gathered the information from them, I've done this post to achieve it in a way easier and faster, without the need to search for thread by thread.
First of all you have to download the files; I leave the official threads, followed by their download links
ADB
Thread: Minimal ADB and Fastboot
ADB Portable
Drivers Motorola
Drivers
Boot Logo
Thread: Remove message "Unlocked Bootloader" of your Moto G6/G6 Plus
Logo White.bin
Automatic BootLogo Installer (Black and White)
TWRP & Magisk
Download TWRP ejecutable
Magisk
Unlock Boot Loader
Thread: Unlock Bootloader
Motorola Unlock
Steps:
¬ Download the files, (Put them in an accessible and fast place, the desk would be good)
¬ Unzip the archives
¬ Copy the files to a single folder (where is the adb)
¬ We open the cmd (you execute the app that is in the folder)
¬ You connect the phone in Quick Start mode (Vol minus + off)
¬ Write this but without the quotes "fastboot oem get_unlock_data"
¬ You will see something in the cmd, copy it in the notebook, Pegua the 5 output lines in a continuous string without (boot manager) or 'INFO' or blanks. It should look like this: 0A40040192024205 # 4C4D355631323030373731363031303332323239 # BD008A672BA4746C2CE02328A2AC0C39F951A3E5 # 1F5328000200000000000000000000000000
¬ We go to the Motorola page, we start session.
¬ We paste the code in step number 6, and we give the blue button
¬ In case it works, we accept terms and conditions
¬ You open your email (With which you started session) you should have received an email from Motorola with a code
¬ Now go back to the cmd and paste this: fastboot oem unlock "you paste your code that came" and hit enter, and put the same again to confirm
¬ Restarts. once turned on, you pay and put in quick start mode
¬ Restarts. Once turned on, you stick it and put it in quick start mode
¬ You execute "white or black" .bat according to what you want to patch the Bootloader notice Unlocked
¬ Wait for me to turn on
¬ You configure it
¬ If you want Root:
Put the Magisk Zip in the Internal Memory
Put the phone in Fastboot mode and connect it to the PC
You execute the "TWRP Executable"
Install the Zip
To install xposed:
Open the Magisk app
Find the module
Install it
Restart
You already have Root
Español
Este Tutorial lo estoy haciendo para lograr obtener el Root en nuestro dispositivo, Se que hay varios hilos similares, así que reuní la información de ellos, he hice este post para lograr hacerlo de una manera más fácil y rápida, sin necesidad de buscar hilo por hilo.
Primero que nada hay que descargar los archivos; les dejo los hilos oficiales, seguidos de sus enlaces de descarga
ADB
Hilo: Minimal ADB and Fastboot
ADB Portable
Drivers Motorola
Drivers
Boot Logo
Hilo: Remove message "Unlocked Bootloader" of your Moto G6/G6 Plus
Descargar Logo Blanco
Instalador Automatico BootLogo (Blanco y Negro)
TWRP & Magisk
Download TWRP ejecutable
Magisk
Liberar el Boot Loader
Hilo: Unlock Bootloader
Motorola Unlock
Pasos:
¬ Descargar los archivos, (Ponerlos en un lugar accesible y rápido, el escritorio sería bueno)
¬ Descomprimimos los archivos("adb")
¬ Abrimos el cmd (ejecutas la app que esta en la carpeta)
¬ Conectas el telefono en modo Arranque Rápido (Vol menos + off)
¬ Escribe esto pero sin las comillas "fastboot oem get_unlock_data"
¬ Te va aparecera algo en el cmd, copialo en el bloc de notas, Pegua las 5 líneas de salida en una cadena continua sin (gestor de arranque) o 'INFO' o espacios en blanco. Debe verse así: 0A40040192024205#4C4D355631323030373731363031303332323239#BD008A672BA4746C2CE02328A2AC0C39F951A3E5#1F532800020000000000000000000000
¬ Nos vamos a la Pág de Motorola, iniciamos sesión.
¬ Pegamos el código en el paso número 6, y le damos al botón azul
¬ En dado caso que funcione aceptamos términos y condiciones
¬ Abres tu correo (Con el que iniciaste sesión) te debió llegar un correo de Motorola con un código
¬ Ahora Volvemos al cmd y pegamos esto: fastboot oem unlock " pegas tu código que te llegó" y le das enter, y vuelves a poner lo mismo para confirmar
¬ Reinicias. una vez encendido, lo pegas y pones en modo arranque rápido
¬ Ejecutas "white o black".bat según lo que desees para así parchar el aviso de Bootloader Desbloqueado
¬ Esperas a que encienda
¬ Lo configuras
¬ Si deseas Root:
Poner el Zip de Magisk en la Memoria Interna
Poner el telefono en Modo fastboot y lo conectas a la pc
Ejecutas el "TWRP Ejecutable"
Instalas el Zip
Para instalar xposed:
Abra la app de Magisk
Busque el modulo
Instalelo
Reinicie
Ya tienes Root
Thread closed...
You were requested to read the FORUM RULES when you registered.
This Rule applies in this case:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Thread can be re-opened if you provide an English translation.
Hi,
after root, etc. this device can i change some settings inside the kernel? like cpu freq, ksm, or others?
Thank You
FYI, this post should be in the Moto G6 Guides, News & Discussion section of the forums.
Hi everyone, i´m trying to flash boot and i get this error using fastboot and mfastboot:
target max-sparse-size: 256MB
sending 'boot' (18992 KB)...
OKAY [ 0.505s]
writing 'boot'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.518s
Someone can help me? plz
Pandarenz said:
Hi everyone, i´m trying to flash boot and i get this error using fastboot and mfastboot:
target max-sparse-size: 256MB
sending 'boot' (18992 KB)...
OKAY [ 0.505s]
writing 'boot'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.518s
Someone can help me? plz
Click to expand...
Click to collapse
You unlocked your bootloader first right?
Sent from my moto g(6) plus using Tapatalk
Xplorer4x4 said:
You unlocked your bootloader first right?
Click to expand...
Click to collapse
Yes bro, I tried to flash the patched boot after unlock the bootloader and the same message appeared
Please can you show me how to do for moto g6 (ALI)
can't root motorola g6 plus (xt-1926-3)
I have a Motorola moto g6 plus (XT1926-3). And i've been trying to root it. I'm trying to unlock my bootloader but , whenever i go into fastboot mode.
Suddenly my phone isn't detected by either fastboot or adb. When i'm using my phone normally it gets detected by adb and not fastboot. I have tried to install the usb drivers by installing Motorola device manager but, i hear a Windows error sound when it gets to step 2 and just hangs on the last few percentile of step 2. I also tried to install the drivers from a site called Motorolausbdriver but then the installation hangs at about 60%. To anyone willing to help me, I thank you from the bottom of my heart.
RABBALQAMAR said:
Please can you show me how to do for moto g6 (ALI)
Click to expand...
Click to collapse
Update the Post, it should work for all variants of the Moto g6, the only thing, find a twrp for your device to be able to root
koningboy18 said:
I have a Motorola moto g6 plus (XT1926-3). And i've been trying to root it. I'm trying to unlock my bootloader but , whenever i go into fastboot mode.
Suddenly my phone isn't detected by either fastboot or adb. When i'm using my phone normally it gets detected by adb and not fastboot. I have tried to install the usb drivers by installing Motorola device manager but, i hear a Windows error sound when it gets to step 2 and just hangs on the last few percentile of step 2. I also tried to install the drivers from a site called Motorolausbdriver but then the installation hangs at about 60%. To anyone willing to help me, I thank you from the bottom of my heart.
Click to expand...
Click to collapse
Many times it's Windows problem, try another PC, OR create another user with administrator privileges and retry
sorry to answer so far, but I did not have my pc at hand
Does this guide still work?
I'm planning to buy an G6+. I'd also like to know if on any of this steps it performs a factory reset (wipe Data)?
Thanks
This guide is for those spanish native speakers that do no understand the english language, please note that translators sometimes makes inaccurate translations and might cause misleads, causing confusion or a required CRITICAL step to not be followed properly. These inaccuracies with the fact non-English speakers might not understand everything as well as a native or fluent speaker, can lead to otherwise unwanted avoidable bricks.
POR MOTIVOS DE SEGURIDAD TU BOOTLOADER DEBE ESTAR DESBLOQUEADO, SI ESTA BLOQUEADO Y ALGO SALE MAL EN EL PROCESO NO PODRAS DESBRICKEARLO Y QUEDARA INSERVIBLE, NO ME HAGO RESPONSABLE POR INSTALACIONES FALLIDAS, BRICKEOS, ETC. SE RECOMIENDA ENCARECIDAMENTE HACER BACKUP DE TODAS TUS PARTICIONES CON TWRP (SOBRETODO DE LA PARTICIÓN EFS PARA RESTAURAR TU IMEI) ANTES DE COMENZAR.
Esta guía está basada en la guía de @HTCDevil, de hecho es una traducción al español de la misma pero con algunas modificaciones y otros detalles agregados, y en este caso la adapté para hacer posible la actualización de Stock 8 (Oreo) a Stock 9 (Pie).
Se ha comprobado que este método funciona con las siguientes variantes del Z2 Play:
XT1710-01, XT1710-02, XT1710-06, XT1710-07, XT1710-09 y XT1710-10 funcionan sin problemas, también funciona con el XT1710-08 y XT1710-11, pero con últimos dos hay que hacer unos ligeros ajustes en el script. He incluido todas las variantes posibles para estos casos.
Agradecimientos especiales a Junior Passos @Junior Passos , el dueño (OP) del post original de Moto Z Brasil.
NOTA: Esta guía está asumiendo que ya tienes instalado Stock 8 (Oreo) en tu Z2 Play, si tu teléfono se encuentra en la versión 7 (Nougat), puedes usarla de igual modo, pero debes fijarte que estés ejecutando el script que actualice a la versión correspondiente. Hay un script para cada modelo del Z2 Play.
Pasos a seguir:
1) Descarguen los drivers (links al final del post)
2) Instala los drivers (Windows) en este orden, primero instala los Drivers Universales ADB, luego instala los drivers de Motorola y reinicia la PC;
3) Descomprime el firmware, el ADB y los scripts todos juntos en la misma carpeta (agradecimientos a htcmania por el paquete);
4) Apaga tu teléfono y ponlo en modo fastboot (Volumen menos + Power), luego conéctalo a la computadora, espera la instalación de los drivers si es necesario;
5) Copia el script correspondiente a la carpeta raíz donde se encuentra el ejecutable adb.exe
6) Dependiendo de tu modelo y la versión de Android que vayas a actualizar, ejecuta el script que termina en .bat y sigue las instrucciones.
Listo.
Se recomienda uns instalación limpia, es decir actualizar + borrar datos de usuario.
Para simplificar las cosas hay 3 líneas omitidas que realmente no hacen falta y de hecho pueden causar problemas en las variantes chinas, estas son:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
Se sabe que el módem (NON-HLOS.bin) que viene con Stock Pie causa problemas de audio durante las llamadas cuando se está utilizando esta versión del módem en un Custom ROM, porque distorsiona el audio a tal grado que se hace imposible entenderlas, por eso esta línea debe omitirse a menos que estés en Nougat y quieras actualizar a Oreo, en cuyo caso sí debes incluir esta línea.
Necesitas una ROM Stock RETAIL, al final del post dejaré el link para que la descargues.
Si por casualidad tienes un boot.img corrompido y no puedes flashear (si tu teléfono es traído de banggood o de otras tiendas que proveen modelos chinos), tienes que introducir este comando:
Code:
fastboot flashing unlock
MAGISK (root) en OREO
Para instalar Magisk en Stock Oreo, pueden darle las gracias a Fabio Feher[/QUOTE]
Fabio Feher said:
Funcionó para mí:
1) Reinicia en modo bootloader (fastboot)
2) Flashea el TWRP con ADB (fastboot flash recovery nombre-del-recovery.img)
3) Entren en el Custom Recovery (TWRP)
4) Entren en ADVANCED > TERMINAL
5) Ejecuten los siguientes comandos en la terminal del teléfono:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
6) Flashear Magisk
7) Reinicien
Click to expand...
Click to collapse
MAGISK (root) en Pie
Para instalar Magisk en Stock Pie no hace falta seguir los pasos 4) y 5) ya que no son necesarios, solo flasheen el custom recovery y a partir de allí flashean el magisk con normalidad.
MAGISK SIGUE SIN FUNCIONAR EN LA STOCK ROM --- COMO ARREGLARLO ---
Si Magisk sigue sin funcionar intenta desinstalando otra vez y flashea la versión v19.3, luego actualiza desde la apk.
Agusti94 said:
MUY IMPORTANTE!!!!!!!!!!
Para instalar Magisk primero flashea la versión 19.x desde TWRP, luego actualiza a 20.x desde la aplicación, de lo contrario el teléfono seguirá reiniciándose en el logo.
Click to expand...
Click to collapse
Instalar Magisk en GSIs:
En algunas GSIs la versión normal de Magisk hace que el teléfono se quede pegado en el logo, por lo que hay que desinstalarlo e instalar una versión modificada específicamente para las variantes de GSI como AOSP y sus derivados, que por cierto tampoco podrás actualizar porque causará el mismo bootloop, pero sí puedes actualizar la apk del manager, si tu teléfono no pasa del logo después de flashear Magisk debes flashear el uninstaller que dejaré al final del post.
Moto Z logo
Después de desbloquear el bootloader, cuando enciendas tu teléfono verás que ya no aparece el logo del Moto Z sino que este es reemplazado con un texto diciendo lo que ya es obvio, para quitar ese texto feo puedes descargar este logo del Moto Z y lo flasheas con el siguente comando:
Code:
fastboot flash logo logoz.bin
A mí me funcionó, por lo que debería funcionarle a ustedes también. Espero que les sea de utilidad.
Links de descarga:
Universal ADB Drivers para Windows http://download.clockworkmod.com/test/UniversalAdbDriverSetup.msi
Motorola USB Drivers para Windows http://www.mediafire.com/file/akiha24e4z3sine/MotorolaDeviceManager_2.5.4.7z/file
Herramientas de ADB: https://www.mediafire.com/file/pgmkw9vj1qut4ba/platform-tools_r30.0.3-windows%28adb%29.7z/file
Actualización RETAIL ROM Stock Pie 9.0: https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Scripts https://www.mediafire.com/file/nwio62ttvch1vjd/scripts.7z/file
64-bit Treble TWRP (necesaria para flashear GSIs, Custom ROMs y hacer backup de todas tus particiones) https://androidfilehost.com/?fid=1322778262904007189
Magisk 20.4: https://www.mediafire.com/file/yh9jtc9rdqzmjeo/Magisk-v20.4.zip/file
Magisk de phhusson v19.3 (para GSIs) https://github.com/phhusson/treble_experimentations/releases/download/v200/magisk-phh.zip
Magisk de ExpressLuke v20.3 (para GSIs) https://sourceforge.net/projects/ex...sk-ten/Magisk-v20.3-15bd2da8-phh.zip/download
Magisk Uninstaller https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-uninstaller-20200323.zip
Modem de Stock Oreo http://www.mediafire.com/file/q8nbpybxc8mjyew/NON-HLOS-Z2P-STOCK-8-OREO.7z/file
Stock Moto Z logo http://www.mediafire.com/file/lpcmsgtm2vs603r/logoz.bin/file
Actualizar a Android 9 Pie con el método oficial (bootloader bloqueado) https://www.youtube.com/watch?v=n57v9r2jysw
Mirrors de todas las ROM del Z2 Play, si van a descargar Nougat u Oreo se recomienda descargar del canal RETLA si tu modelo es XT1710-06, también puedes descargar la versión del mismo canal de tu proveedor (si eres de Colombia por ejemplo tigco) https://mirrors.lolinet.com/firmware/moto/albus/official/
Aquí termina la guía para usuarios de Windows, ̶e̶n̶ ̶e̶l̶ ̶s̶i̶g̶u̶i̶e̶n̶t̶e̶ ̶c̶o̶m̶e̶n̶t̶a̶r̶i̶o̶ ̶a̶g̶r̶e̶g̶a̶r̶é̶ ̶l̶a̶ ̶g̶u̶í̶a̶ ̶p̶a̶r̶a̶ ̶i̶n̶s̶t̶a̶l̶a̶r̶l̶o̶ ̶e̶n̶ ̶L̶i̶n̶u̶x̶,̶ ̶j̶u̶n̶t̶o̶ ̶c̶o̶n̶ ̶t̶o̶d̶a̶ ̶l̶a̶ ̶l̶i̶s̶t̶a̶ ̶d̶e̶ ̶c̶o̶m̶a̶n̶d̶o̶s̶ ̶p̶a̶r̶a̶ ̶h̶a̶c̶e̶r̶ ̶l̶a̶ ̶i̶n̶s̶t̶a̶l̶a̶c̶i̶ó̶n̶ ̶m̶a̶n̶u̶a̶l̶ ̶d̶e̶p̶e̶n̶d̶i̶e̶n̶d̶o̶ ̶d̶e̶l̶ ̶m̶o̶d̶e̶l̶o̶.̶
Quizás la próxima guía que haga sea para actualizar a Pie 9.0 con el bootloader bloqueado, es decir con el método oficial OTA.
Guía original de @HTCDevil https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153
[GUIDE] [STOCK] How to update your Moto Z2 Play to Android 9.0 Pie (fastboot)
Due to the forum rules there must be posted an english version of the original thread. Any questions you have you can ask here or DM directly.
FOR SECURITY REASONS YOUR BOOTLOADER MUST BE UNLOCKED, IF ITS LOCKED AND SOMETHING GOES WRONG DURING THE PROCESS YOU MIGHT BE UNABLE TO UNBRICK IT RENDERING IT UNUSABLE, I AM NOT RESPONSIBLE FOR FAILED INSTALLATIONS, BRICKS, ETC. IT IS STRONGLY RECOMMENDED TO BACKUP ALL YOUR PHONE DATA (SPECIALLY NFS SO YOU CAN RESTORE YOUR IMEI IF YOU LOSE IT SOMEHOW) WITH TWRP BEFORE STARTING.
This guide is based on @HTCDevil's guide, which was originally meant to upgrade from Nougat to Oreo, so I adapted his guide so it also works to update from Oreo to Pie and also updated it with more relevant information that isn't available on the old outdated guides.
It has been tested and it works with the following models of the Z2 Play:
XT1710-01, XT1710-02, XT1710-06, XT1710-07, XT1710-09 and XT1710-10 works without issues with the general same commands, it also works with the XT1710-08 and XT1710-11, the former needs to remove the two modemst lines and with the latter it needs to remove also those two lines, plus the modem and fsg lines, so I included all possible cases for every model.
A special, big, superb thanks to Junior Passos @Junior Passos the op of the motozbrasil thread. <<<
NOTE: This guide focuses mainly on upgrading to Android Pie with adb fastboot, so I am already assuming you have Android 8 (Oreo) installed, if your phone is still in Android 7 (Nougat), you might as well do the official OTA update since at this time and date it is now available for all models of the Z2 Play worldwide.
Steps to follow:
1) Download Drivers and all required files (links at the end of this post);
2) Install the drivers (Windows) in this order, and install Universal ADB Drivers, then install the Motorola Drivers and reboot your PC;
3) Unzip the firmware, ADB and the scripts everything in a single folder (special thanks to htcmania for the package);
4) Turn off your phone and put it into fastboot mode (Volume down + Power), then connect it to your PC, wait for drivers to install if they haven't installed yet;
5) Copy the corresponding script to the root folder where it is located the executable adb.exe
6) Depending on the model of your Z2 Play, execute the corresponding script .bat and follow instructions.
Profit.
It is recommended to do a clean install, that is, do a full wipe before updating.
To simplify things there are 3 entirely omitted lines that aren't really needed and in fact in can cause problems in the chinese variants, these files are:
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
It is known that the modem file (NON-HLOS.bin) that comes with Stock Pie causes audio issues during calls whenever a custom ROM is installed afterwards, because it distorts the audio to the point it becomes impossible to understand the call, so this file specifically should be skipped unless you are updating from Nougat to Oreo, in that case it should be flashed too. The modem file from Stock Oreo works flawlessly on all Stock and Custom ROMs, so stay with this one.
Also you will need a RETAIL Stock ROM, at the end of the post I will leave the link to get that and the modem.
If you have a corrupted boot.img and you are not able to flash (like bangood or other shops do with chinese model), you first have to give that:
Code:
fastboot flashing unlock
---STUCK ON LOGO AFTER INSTALLING MAGISK ON STOCK ROM --- HOW TO FIX IT
Sometimes when installing Magisk your phone may get stuck in bootloop forever, so here is one workaround to fix it, you can also flash uninstaller and try again with other version.
Agusti94 said:
VERY IMPORTANT!!!!!!!!!!
To install magisk flash first V19.x from twrp, then update to V20.x from the manager. otherwise the phone gets stucked in bootloop
Click to expand...
Click to collapse
About Magisk in Oreo, you could give a thanks to Fabio Feher:
Fabio Feher said:
It work for me:
1: Reboot into Bootloader
2: ADB Flash TWRP
3: Start Recovery (TWRP)
4: Enter in ADVANCED > TERMINAL
5: Run commands:
echo KEEPVERITY=true>>/data/.magisk
echo KEEPFORCEENCRYPT=true>>/data/.magisk
6: Flash Magisk
7: Reboot.
Click to expand...
Click to collapse
To install Magisk in Pie follow the same steps above, except you don't have fo follow steps 4 and 5, just flash it and reboot.
MAGISK IN GSIs: To install Magisk in Custom GSIs, you need to flash this modded version of phhusson's Magisk, also you cannot update it, so you have to stuck with that version, you can update the manager apk, tho. If your phone gets stuck on logo or keeps in bootloop flash the uninstaller provided at the end ot this post.
Moto Z logo
After unlocking your bootloader, whenever you turn on your phone you will notice that the Stock Moto Z boot logo is gone and instead it shows some ugly text telling what is already obvious, so in order to get rid of that and replace the Void Warranty text you can flash this Stock Moto Z logo with this command:
Code:
fastboot flash logo logoz.bin
It worked for me, so it should work for you too.
Hope is useful.
LINKS/RESOURCES
Universal ADB Drivers for Windows http://download.clockworkmod.com/test/UniversalAdbDriverSetup.msi
Motorola USB Drivers for Windows http://www.mediafire.com/file/akiha24e4z3sine/MotorolaDeviceManager_2.5.4.7z/file
latest adb platform tools: https://www.mediafire.com/file/pgmkw9vj1qut4ba/platform-tools_r30.0.3-windows%28adb%29.7z/file
ROM Stock RETAIL Pie 9.0 Update: https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Scripts https://www.mediafire.com/file/nwio62ttvch1vjd/scripts.7z/file
64-bit Treble TWRP (needed to flash Treble-based GSIs and Custom ROMs and also needed for backup of your phone partitions) https://androidfilehost.com/?fid=1322778262904007189
Magisk 20.4: https://www.mediafire.com/file/yh9jtc9rdqzmjeo/Magisk-v20.4.zip/file
Phhusson's Magisk v19.3 (for GSIs) https://github.com/phhusson/treble_experimentations/releases/download/v200/magisk-phh.zip
ExpressLuke's Magisk v20.3 (for GSIs) https://sourceforge.net/projects/ex...sk-ten/Magisk-v20.3-15bd2da8-phh.zip/download
Magisk Uninstaller https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-uninstaller-20200323.zip
Stock Oreo Modem http://www.mediafire.com/file/q8nbpybxc8mjyew/NON-HLOS-Z2P-STOCK-8-OREO.7z/file
Stock Moto Z Logo http://www.mediafire.com/file/lpcmsgtm2vs603r/logoz.bin/file
Mirrors of all the ROMs of the Z2 Play, if you are going to download Nougat or Oreo it is recommended to choose the one that belongs to your update channel. https://mirrors.lolinet.com/firmware/moto/albus/official/
Update to Android 9 Pie with the official OTA method (locked bootloader) https://www.youtube.com/watch?v=n57v9r2jysw
Here ends the guide, for the Linux guide and the complete list of commands to manually flash the ROM you can check @HTCDevil's original guide: https://forum.xda-developers.com/z2-play/how-to/fastboot-rom-oreo-retail-via-fastboot-t3786153
#3 Reservado también
#4 este también está reservado
Please make English tutorial
Que onda, ya tienes activadas las dos sims del motoroña z2 play??
B3NJ4$ said:
Que onda, ya tienes activadas las dos sims del motoroña z2 play??
Click to expand...
Click to collapse
Hola, mi moto Z2 Play no es Doble SIM, es Single SIM.
De paso se dañó y parece que ya no voy a participar más en este foro.
XT1710-06 Proximity sensor problem and light sensor disappeared
I'm looking for official firmwares for Moto One Fusion (not plus). XT2073-2.
Android 10 latest build is: Motorola_One_Fusion_XT2073-2_ASTRO_RETAIL_QPLS30.62-22-3_10
I haven't found a place to download from. The only one is a google drive invalid/expired link. I would thank any help!
VassagoU7XDA said:
I'm looking for official firmwares for Moto One Fusion (not plus). XT2073-2.
Android 10 latest build is: Motorola_One_Fusion_XT2073-2_ASTRO_RETAIL_QPLS30.62-22-3_10
I haven't found a place to download from. The only one is a google drive invalid/expired link. I would thank any help!
Click to expand...
Click to collapse
There you go https://mirrors.lolinet.com/firmware/moto/astro/official/
jmcc30 said:
There you go https://mirrors.lolinet.com/firmware/moto/astro/official/
Click to expand...
Click to collapse
Thank you very much , but sadly can't reach the link. Do you know if still alive?
VassagoU7XDA said:
Thank you very much , but sadly can't reach the link. Do you know if still alive?
Click to expand...
Click to collapse
Oh yeah, they seem to have storage issues, tell me your country and I might find you the link
jmcc30 said:
Oh yeah, they seem to have storage issues, tell me your country and I might find you the link
Click to expand...
Click to collapse
Link was working today , I found and already downloaded the firmware. You helped me so much . Thank you!
VassagoU7XDA said:
Link was working today , I found and already downloaded the firmware. You helped me so much . Thank you!
Click to expand...
Click to collapse
Nice, have great flashing!
.
duvancho said:
good that someone help me what happens els that fhasee a boot.img patched by magisk manager and I damaged the touch tatil of my android
bueno que alguien me ayude lo q pasa els que fhasee un boot.img parcheado por magisk manager y me daño el touch tatil de mi androide
Click to expand...
Click to collapse
That happens when you flash the incorrect boot.img. incorrect I mean another firmware version of the boot.img or a boot.img from another device .
You have to get the correct boot.img and flash it the same way you did it.
* Be sure you have the Moto One Fusion. If you have the Moto One Fusion Plus you have to get the firmware for that specific device. The link in the steps below is for Moto One Fusion.
Don't worry, if you read carefully and follow the next steps you can fix your device.
1. I suggest you to download the most recent firmware from here https://mirrors.lolinet.com/firmware/moto/astro/official/
2. Unzip the downloaded file and get the boot.img
3. Flash it the same way you did it with the incorrect boot.img
4. If that fix the touch issue and everything works fine you can use the same boot.img to be patched by magisk and try the step 3 with the patched boot.img.
5. If step 3 doesn't work return to step 1 and try with another firmware version.
6. If the steps above didn't work, You can flash the full firmware. You have to follow another steps for that. Let me know first if that happens .
,
?
duvancho said:
[QUOTE = "VassagoU7XDA, publicación: 84191209, miembro: 11327551"]
Eso sucede cuando actualiza el archivo boot.img incorrecto. incorrecto me refiero a otra versión de firmware de boot.img o un boot.img de otro dispositivo.
Debe obtener el boot.img correcto y actualizarlo de la misma manera que lo hizo.
* Asegúrese de tener el Moto One Fusion. Si tiene el Moto One Fusion Plus, debe obtener el firmware para ese dispositivo específico. El enlace de los pasos a continuación es para Moto One Fusion.
No se preocupe, si lee atentamente y sigue los siguientes pasos, puede reparar su dispositivo.
1. Le sugiero que descargue el firmware más reciente desde aquí https://mirrors.lolinet.com/firmware/moto/astro/official/
2. Descomprima el archivo descargado y obtenga el archivo boot.img
3. Actualice de la misma manera que lo hizo con el archivo boot.img incorrecto.
4. Si eso soluciona el problema táctil y todo funciona bien, puede usar el mismo boot.img para ser parcheado por magisk e intentar el paso 3 con el boot.img parcheado.
5. Si el paso 3 no funciona, vuelva al paso 1 e intente con otra versión de firmware.
6. Si los pasos anteriores no funcionaron, puede actualizar el firmware completo. Tienes que seguir otros pasos para eso. Avísame primero si eso sucede.
[/ CITAR]
No friend is still the same with the same problem and I'm sad that I bought it for six days and I already damaged it and the guarantee does not cover those failures, I have to repair it on my own merits as well as damage it. I have already installed several firmware from this rom:
astro_retail-user 10 QPLS30.62-22-3 f2517 (moto one fusion) in several pages and it still does not work.
the other would be to install the complete rom but I would not know if the commands are fhasable I got them from a third party page.
Anyway, any help would be very useful to me, thanks.
Click to expand...
Click to collapse
I'm totally sure you can fix your phone. I'm not at home right now , maybe tomorrow at night I will review the firmware file and give you the steps to fash the full firmware.
duvancho said:
[QUOTE = "VassagoU7XDA, publicación: 84191209, miembro: 11327551"]
Eso sucede cuando actualiza el archivo boot.img incorrecto. incorrecto me refiero a otra versión de firmware de boot.img o un boot.img de otro dispositivo.
Debe obtener el boot.img correcto y actualizarlo de la misma manera que lo hizo.
* Asegúrese de tener el Moto One Fusion. Si tiene el Moto One Fusion Plus, debe obtener el firmware para ese dispositivo específico. El enlace de los pasos a continuación es para Moto One Fusion.
No se preocupe, si lee atentamente y sigue los siguientes pasos, puede reparar su dispositivo.
1. Le sugiero que descargue el firmware más reciente desde aquí https://mirrors.lolinet.com/firmware/moto/astro/official/
2. Descomprima el archivo descargado y obtenga el archivo boot.img
3. Actualice de la misma manera que lo hizo con el archivo boot.img incorrecto.
4. Si eso soluciona el problema táctil y todo funciona bien, puede usar el mismo boot.img para ser parcheado por magisk e intentar el paso 3 con el boot.img parcheado.
5. Si el paso 3 no funciona, vuelva al paso 1 e intente con otra versión de firmware.
6. Si los pasos anteriores no funcionaron, puede actualizar el firmware completo. Tienes que seguir otros pasos para eso. Avísame primero si eso sucede.
[/ CITAR]
No friend is still the same with the same problem and I'm sad that I bought it for six days and I already damaged it and the guarantee does not cover those failures, I have to repair it on my own merits as well as damage it. I have already installed several firmware from this rom:
astro_retail-user 10 QPLS30.62-22-3 f2517 (moto one fusion) in several pages and it still does not work.
the other would be to install the complete rom but I would not know if the commands are fhasable I got them from a third party page.
Anyway, any help would be very useful to me, thanks.
Click to expand...
Click to collapse
Try the guide I wrote here: https://forum.xda-developers.com/t/guide-one-fusion-xt2073-fastboot-flashing.4205723/
Tell me if it works
.
duvancho said:
[QUOTE = "jmcc30, publicación: 84194363, miembro: 3905426"]
Prueba la guía que escribí aquí: https://forum.xda-developers.com/t/guide-one-fusion-xt2073-fastboot-flashing.4205723/
Dime si funciona
[/CITAR]
gracias amigo, lo que
[QUOTE = "jmcc30, publicación: 84194363, miembro: 3905426"]
Prueba la guía que escribí aquí: https://forum.xda-developers.com/t/guide-one-fusion-xt2073-fastboot-flashing.4205723/
Dime si funciona
[/CITAR]
gracias amigo, lo que sospechaba tenía los códigos parpadeando mal si funcionó para mí muchas gracias jmcc30 y VassagoU7XDA.
Click to expand...
Click to collapse
Good to know your phone is working again. That guide has exactly the steps I was talking about. Just in case you still interested in magisk, you can use the boot.img file you flashed to fix your phone to be patched by magisk app. The result will be a flashed_boot.img that you can flash using the command:
fastboot flash boot flashed_boot.img
and there you go. If something goes wrong you can flash the original one as follow
fastboot flash boot boot.img
The only rule here is to flash the correct boot.img file. The same your phone is already using. If you use a boot.img from another firmware version you're going to experience the same screen touch problem.
In Spanish (trying to explain in the best way)
En Español (tratando de explicar de la mejor manera)
Es bueno saber que su teléfono está funcionando nuevamente. Esa guía tiene exactamente los pasos de los que estaba hablando. En caso de que todavía estés interesado en magisk, puedes utilizar el archivo boot.img que flasheaste para arreglar su teléfono para que sea parcheado por la aplicación magisk. El resultado será un archivo flashed_boot.img que puedes flashear usando el comando:
fastboot flash boot flashed_boot.img
y ahí lo tienes. Si algo sale mal, puede flashear el boot.img original de la siguiente manera
fastboot flash boot boot.img
La única regla aquí es flashear el archivo boot.img correcto. El mismo que tu teléfono ya está usando. Si usas un boot.img de otra versión de firmware, experimentarás el mismo problema de que no responde la pantalla.
good friends again what happens is that it begins to present errors in the android. the screen goes black every time I use it. and then I have already restarted it from the factory, I have also fasted all the versions of the firmware and it continues with the same failure if someone knows why this happens to me I would thank you
,
Can you make a video (from another phone)
Ok, I asked for a video because I don't understand the problem at all.
By the way, are you sure you flashed the last firmware version?
Can you put here the full firmware file name ?
Have you tried with another firmware versión?
,