my english is not good so sorry
hello i see most thears with error Volume Size is too big..... or error hidden.img.ext4 fail! (size) is too big
i find methot for repair it
what u need
1. Odin i use 3.07
2. firmware 4 files AP, BL, CSC, CP and u must have PIT (J5NLTE_EUR_OPEN_HIDDEN_200MB)
now:
1. Run Odin
2. Add files
Bootloader = BL
PDA = AP
PHONE = CP
CSC = CSC
and ADD PIT
u must uncheck Auto reboot
U must select
1. RE partirion
2. Nand erase
3. F reset time.
now connect ur phone Via Download mode
Volume down + home + power+ next one click volume up
Odin found ur phone then u Click start and wait
after end odin give u blue screen RESET on odin, long hold power. Phone restart wait for phone go to recovery u on first screen see error then Press random keys vol + - and power don't hold u see stock recovery select factory reset and restart phone
i have this soft XEO Poland but im from Poland Android 6.0.1 no brand clear official from samsung
one Pack with all files what u need Rom Official Samsung Android 6.0.1 XEO Poland
Download
after this u can again flash TWRP and custom roms This method repair ur Partition on phone u can use this rom as stock what u want
Related
I have made system reset in rec mode ( volume up + turn on + home buttons ) . also factory reset and after reboot i can't turn on my galaxy, it is stuck on the name GT 9300 when it turns on. i am new in android system and can anyone explain what shoult i do ?
system reset what do you mean as you have factory reset .
First thoughts are that you have wiped your phone of all data and OS .
Please boot to download mode and post product name as shown .
jje
If you made a system reset(formatted /system), you deleted your os, made your phone totally clean.. You have to flash a new rom, if hou want a stock one, go to sammobile.com
You have to download Odin3 v1.85 and the rom for your carrier..
1.Put the phone to download mode by pressing and holding Vol Up+Home+Power for 10 seconds then press up.
2.Open odin -> connect your phone to PC
3.click pda button and choose the rom file which should be .md5
4.make sure only auto reboot and f.reset time are checked(and pda ofc)
5.click start
Your phone should boot up..
Hope it was helpful.
Greetings
Sent from my GT-I9300 using Tapatalk 2
tornike14 said:
I have made system reset in rec mode ( volume up + turn on + home buttons ) . also factory reset and after reboot i can't turn on my galaxy, it is stuck on the name GT 9300 when it turns on. i am new in android system and can anyone explain what shoult i do ?
Click to expand...
Click to collapse
I Guess you used.. Philz recovery and did a Complete wipe..! If yess.. You will have to reinstall Stock rom.. as the steps mentioned above..
How to Root Galaxy Star pro GT-S7262
using prerooted firmware
http://www.youtube.com/watch?v=ulXHTeUGbfU
1- Enter your phone into Download Mode by pressing ( Volume down key + Home key + Power key ).
2- Open Odin.
3- Download this file http://goo.gl/HNDNkh and extract it.
4- Put the file in the PDA and press start.
5- After flash finish the phone will restart.
6- Open the SuperSu app and press (Continue) then (Normal).
7- The phone now rooted
P.C : This ins't my firmware and I dont know the developer, do it on your risk.
The Prerooted firmware: http://goo.gl/HNDNkh
The Odin: http://goo.gl/0Xdr55
Twitter: https://twitter.com/traien
Email: [email protected]
XDA:DevDB Information
Samsung Galaxy S7262 prerooted firmware, ROM for the Samsung Galaxy Star
Contributors
en.osama
ROM OS Version: 4.1.x Jelly Bean
Version Information
Status: Testing
Created 2014-11-08
Last Updated 2014-11-08
my phone is trash
Luthfi Dimaz said:
Click to expand...
Click to collapse
help pleasse my phone now is a trush after i fla**** with yours prerooted firmware he doesn't boot up or do nothind please reply me :crying:
bamostta said:
help pleasse my phone now is a trush after i fla**** with yours prerooted firmware he doesn't boot up or do nothind please reply me :crying:
Click to expand...
Click to collapse
why you ask me ? ask to own thread
Bricked screen blank issue is solved
Dear user, i faced same issue. After flashing this rom i thought the phone is bricked, but actually the screen was not displaying any content of this ROM's OS. I came to know this when i switched on and heard the booting sound of samsung. The solution for that is you flash the original firmware through ODIN. Please follow these steps.
1. Remove your battery, and apply it again in device
2. Now press Home + Power button + Volume down button for some time then release all buttonn and press Volume up button. (I am sure the screen will be blank and you will not aee anything, but in background it will work and take you to Odin Download mode if you know how to take your device in ODIN mode to flash firmwares. It will be completely guesswork to take your Mobile in ODIN mode if you know exact seconds for how long u need to press Home + Power + Volume Down button and release them)
3. Now start ODIN program on computer and connect your mobile with USB cable to your computer, your ODIN user interface will show "Added" dialogue message. That means your mobile is in ODIN mode and ready to flash.
4. Now flash your original firmware through PDA option.
And yes, i made my phone working in same way. I am sure your phone will work again too. Its tested by me. For any further queries email me on [email protected]
phone was with pattern lock , i flashed CSC file and phone gone to white display then i flashed with a file(S7262JVUANB) which before this it was repairing white screen but after flash now phone is in blank lcd (no light), but when i write that CSC file phone goes to white screen
me also same issue , please suggest solution ....
solution found
just flash phone with this S7262JVUAOK1
Download and extract/unzip the firmware file
Download and extract Odin v3.12.3 ZIP file
Open Odin v3.12.3 software
Reboot device in Download Mode (hold Home + Power + Volume Down)
Connect device and wait for "ID: COM" to turn blue in Odin
Add the downloaded firmware file to AP/DPA
Make sure "Re-Partition" is NOT ticked
Click the "Start" button to begin the installation process
p4pentium4 said:
solution found
how do you got to download mode i can't see anything "i know power+ home+down" but when i press then nothing happen "even after pressing vol up
could u tell how do u did it "pressed for how long and did u pressed vol up" ...
Click to expand...
Click to collapse
bishoy ashraf said:
solution found
how do you got to download mode i can't see anything "i know power+ home+down" but when i press then nothing happen "even after pressing vol up
could u tell how do u did it "pressed for how long and did u pressed vol up" ...
Click to expand...
Click to collapse
that you have to do it properly ,
thing is u have to assume , once it is in download mode you can see it in odin as COM Port detection .
Best of luck !!!!!!
p4pentium4 said:
me also same issue , please suggest solution ....
solution found
just flash phone with this S7262JVUAOK1
Download and extract/unzip the firmware file
Download and extract Odin v3.12.3 ZIP file
Open Odin v3.12.3 software
Reboot device in Download Mode (hold Home + Power + Volume Down)
Connect device and wait for "ID: COM" to turn blue in Odin
Add the downloaded firmware file to AP/DPA
Make sure "Re-Partition" is NOT ticked
Click the "Start" button to begin the installation process
Click to expand...
Click to collapse
Thank you. It works
So i wanted to change roms to stock and deleted the system stuff now the devices only displays the samsung galaxy j7 logo then its just a black screen.
i just want to get to recovery mode
someone help
Try this from my early post .
#Method 1
1. Install Smart Switch on your PC : https://www.samsung.com/global/download/smartswitchwin/
2. From rest fallow this video to follow easy : https://www.youtube.com/watch?v=9QhJngOuLQ4
#Method 2
1. Make Free account on sammobile.com
2. go here https://www.sammobile.com/firmwares/galaxy-j7-/SM-J710F/
check if is your model SM-J710F or another ...
put your region from where the phone you bought. Use lattest Version of OS
3. Extract (unzip) the firmware file to the desktop or what ever is easy for you to locate firmware
4. Download Odin v3.12.7 from here: https://dl.sammobile.com/Odin3-v3.12.7.zip
Extract Odin ZIP file
Open Odin v3.12.7
5. Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
If you are still not sure how to do , follow this video : https://www.youtube.com/watch?v=7SK3IMprKVQ
I soft bricked my S9+
Its stuck on "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
Smart Switch wont work, becuase i dont have recovery code, and it wont let me do it when i try the other option.
Odin doesnt work either.
Cant boot to recovery or download
What now...
Boot into download mode you can do this by press and hold the Bixby and volume down buttons, then press and hold the power button. You can get your model number from here.
You will the need to go to https://updato.com/ to find your firmware.
Then go to Google and search for Odin 13 it's important that it's 13 or greater otherwise it won't work.
Make sure your in download mode and then plug your device in and open odin. You should see your device in blue within the odin program with com 5 on it for example.
Extract your firmwares zip and then go back to odin and click on AP and browse to the firmware zip and select the AP file. It will seem as if odin has crashed it hasn't give it 2 minutes as its verifying the biggest file. Then to the same for BL and CP.
For CSC there will be two files
Use Home_CSC if you are keeping the same CSC on your device and wish to keep data.
Use CSC if your changing CSC or want a factory data wipe.
If Home_CSC dosent fix the issue then use regular CSC.
The phone should then be restored to a working condition
that helped me get out of my boot loop
xp500 said:
that helped me get out of my boot loop
Click to expand...
Click to collapse
Yeah I used to brick my s6 all the time but odin saves the day everytime