Related
So. I deceided to join this forum in order to ask for some help from all those people I saw while searching the net.
I have to admit I am quite a noob with mobile systems, although I have gone way too far the last 3 days!
Here is the problem: I have an mt6575 processor phone in which want to add Greek Language settings. I have downloaded a folder form the manufacture's site, but it didn't contain any instructions. Just some .bin files (ALICE.BIN VIVA.bin, SANSTAR50_6464_11B_BOOTLOADER_V005_MT6250_MAUI_11B_W11_32_SP_V1.bin and ZIMAGE_ER.bin)and a scatter file that can not be read by flash tool (scatSANSTAR50_6464_11B.txt).
After a lot of reading around here and a lot of other forums and sites I realised that in order to do anything, I had to root my phone. I wasn't able to do it through superclick or mtk droid tools so I followed the instructions I found here:
http://forum.xda-developers.com/showthread.php?t=2160490&styleid=18
However, I am stuck on the final step.. I can't seem to get my phone on cwm mode... In fact I am not sure I know what exactly this is. I manage to open my phone on the android recovery utility but I am not able to make any choice. Everytime I press some of the menu's choises an android robot with an exclamation mark fills the screen and nothing happens...
Anyway..even if I manage to finalize the rooting process.. I still don't know what to do with the files I have... should I use them somehow on flash tool?
By the way.. The files come with a tool called Multiport Download Flash Tool which looks like Sp flash tool but has too many port options.
I'd be glad if someone helped me with this!
Thank you in advance,
Irene
1. Dump your stock recovery image then make a cwm or twrp (preferably twrp) from yueweng's thread for mediatek devices via old cwm or twrp port tool
2. Flash it via sp flash tool (download MTK 6575 scatter from internet)
3. Then reboot into recovery and if in twrp then reboot and it will ask you to root it or not
Or
If in cwm then download supersu Flash zip file and flash it
You have root access now
Press thanks if helped
This is for real, folks. The first working custom recovery for Asus ZenPad 8.0 Z380M and a method to flash it under a locked bootloader. This took quite a bit of work to make, partly due to having to find a way to bypass the locked bootloader. And because of a kernel configuration issue that limited the size of the initial ramdisk, which took some serious effort to weed out. @lss1977 helped to port it to this device. And of course, credits to TeamWin for TWRP.
In addition to this thread, the current Z300M/Z301M TWRP thread and the the old Z300M recovery/rooting thread may be helpful. These models share the same hardware and software base, so most things that apply to one tablet also apply to the other.
DISCLAIMER
As usual, you do anything described in this post at your own risk. No one but you is responsible for any data loss, bricking or damage of your device.
REQUIREMENTS
Windows PC
SP Flash Tool version 5.1532 (only this version will bypass security checks)*
MediaTek VCOM drivers (available through Windows Update)
Z380M scatter file, attached
Recovery image, attached
Z380M preloader file (optional), available inside the stock firmware download
ZenPad Z380M tablet upgraded to Android N
* If you prefer to use a more recent SP Flash Tool, check out the special image file below.
This won't be a guide on how to use SP Flash Tool. There are plenty of good guides out there like this one on how to set up drivers, load scatter files, flash and make backups with SP Flash Tool. If you're not familiar with this software or how to flash MediaTek devices in general, please do your research before attempting this. I will just get straight to the specifics about the ZenPad 8.
FIRST TIME INSTALLATION
For a locked bootloader:
At this point you should have your tablet powered off, the drivers installed, all of your data backed up, and SP Flash Tool v5.1532's Download tab open and loaded with the tablet's scatter file. Open the download agent file DA_PL.bin, replacing the default MTK_AllInOne_DA.bin. (You can use the AllInOne DA if you want, but the procedure involves extra steps as described below.) Load the extracted TWRP recovery image (twrp-3.2.1-0-z380m.img) under the recovery partition line in the partition table. Click the Download button inside SPFT. Now just connect the USB cable to your tablet and your computer's USB port. It should start the download process automatically and disconnect when finished.
Alternative Method:
If you're using MTK_AllInOne_DA.bin, you have to hold the Volume Up key as you insert the cable, which puts the device into an emergency download mode. In addition, you will need to have the stock preloader*.bin file loaded inside SPFT for it to be able to communicate with your tablet. The preloader is available inside the official zip file download. Do not flash the preloader (untick the box) or any partitions other than recovery. You just need to have a valid bin file selected under the Preloader line.
For an unlocked bootloader:
If you have used the Asus unlock tool to unlock your device, you will still not be able to use fastboot flash to install a custom recovery. However, you can do a "hot boot" or a tethered boot of TWRP. This method doesn't require SP Flash Tool. Download the TWRP image, put your tablet in fastboot mode and connect to PC. Then run this command to boot TWRP dynamically:
fastboot boot twrp-3.2.1-0-z380m.img
Once inside TWRP, flash twrp-3.2.1-0-z380m.img to Recovery using Install -> Install Image. Then reboot to recovery. You may be able to use TWRP in the tethered boot mode, but that could result in glitches due to different parameters passed by the bootloader to the kernel. That's why flashing is recommended.
To update from your installed TWRP version to a new one, just transfer the image to your tablet, then boot to TWRP and install it by going to Install -> Install Image and flashing to Recovery.
START RECOVERY
With the tablet powered off, hold the Volume Up and Power keys together until you get to a menu where you can select "recovery". Use Vol. Up to scroll and Vol. Dn to select. If you have a locked bootloader, it will show a Yellow State message because the recovery is not signed by the OEM. Just press volume up to boot it. On the welcome screen of TWRP it will ask you about modifying the system partition, I suggest you go with Keep System Read-only. Doing otherwise will complicate your OTA updates.
WARNING: Never start the stock recovery from the bootloader menu on this device. It is programmed by the bootloader to instantly wipe your data without any warning. Also, be aware that Android installs the stock recovery at every normal boot cycle. So you either have to flash the TWRP every time you want to run it, or disable the automatic recovery installation in the stock firmware. Any kind of mod to the boot image will prevent the automatic recovery installation. If you're not sure which recovery you have installed, you can always do a 'adb reboot recovery' from Android without risk of data loss.
What works: Basically everything... access to major partitions, decrypted userdata partition, decrypted adoptable storage, external SD card, ADB, USB-OTG, touch interface, splash screen, installing stock Asus OTA/web FW updates
What doesn't work: (no known problems yet, but please report any)
Not guaranteed to work: factory reset
DOWNLOAD
(Updated February 3, 2018: updated kernel to firmware 5.3.18; up-to-date TWRP 3.2.1 sources)
SP Flash Tool v5.1532
Z380M Scatter file for all storage sizes (right click, Save link as...)
Recovery image
Signed image for Flash Tool only -- may be flashed with recent SP Flash Tool versions -- DO NOT INSTALL USING ANY OTHER METHOD -- tested with SPFT 5.1736.
Development and experimental files
Source code
P.S. The thanks button doesn't bite.
Nice one now lets get some custom roms done.
Has anyone installed this yet? I see the file has been downloaded a few times. Any feedback is welcome.
If you want the recovery to stick after reboot either rename or remove system/bin/install_recovery.sh.
lss1977 said:
If you want the recovery to stick after reboot either rename or remove system/bin/install_recovery.sh.
Click to expand...
Click to collapse
The way I did it was to edit the init.rc file inside the boot ramdisk and comment out the service block that calls install_recovery.sh. I used the MTK boot image unpack/repack tools. I don't know, it seems like changing anything on the system partition will break OTA updates because of dm-verity. Because that depends on verifying each block of the file system. I have never even mounted the system as R/W in recovery.
how to create scater file from text posted? I copied all text to MT8163_Android_scatter.txt file but when open with splash tools give error "scatter file is invalid"
please atach your working scatter file to other atachments
PxYra said:
how to create scater file from text posted? I copied all text to MT8163_Android_scatter.txt file but when open with splash tools give error "scatter file is invalid"
please atach your working scatter file to other atachments
Click to expand...
Click to collapse
OK, I added the scatter file as a download. It was a pain in the ass to copy & paste. (But it did work.)
Problem fixed downloaded new version of flashtool 5.16 and scatter working
Ok I installed TWRP on Z380M P00A, and wanna say to other
1. Use VCOM drivers only from splash tool official site
2. To install VCOM drivers first need enter chinese recovery tablet, then in windows device manager you see USB device, install manualy drivers (don forget in windows disable driver signature)
3. Use only SP-Flash-Tool-v5.1532.00, newer or older version not properly working with this phone
Ok, thanks for the update, PxYra. Just to let you know, there are signed versions of VCOM drivers floating around so you don't need to mess with signature enforcement. Here's one: https://www.androidfilehost.com/?fid=24591000424943663. They are also updated by Windows so you can just let Windows Update install them.
Thanks for your work.
Flashing procedure works only with "MTK_AllInOne_DA.bin" method for me. But this is OK!
(Updated May 6, 2017: added kernel from firmware 5.3.7, source code cleanup)
Click to expand...
Click to collapse
is it possible to get the older versions? I need Android 6.x, because of xposed-Framework for my Zenpad 8.0 Z380M.
Greets Freisei
Hey freisei...
I never posted a version for Android 6. There was just one based on the 5.3.6 kernel, practically the same as the current one. That's why I didn't keep it. I could try to build one for you if you want, but I can't test it of course. Does this recovery not boot at all on the old firmware?
It's strange that the DA_PL.bin method didn't work for you. What happened when you tried it? I suppose the old preloader doesn't allow it(?).
hello guys, you think lineage os official version for asus z380kl (p024) will work on our z380m ?
---------- Post added at 08:19 PM ---------- Previous post was at 08:05 PM ----------
Can anyone help me? after selecting recovery img, pressing download and inserting usb cable, nothing happens. Thanks in advance
lss1977 said:
If you want the recovery to stick after reboot either rename or remove system/bin/install_recovery.sh.
Click to expand...
Click to collapse
hello friend, can you please upload that file? I deleted it, but now I need it to revert to official recovery, as my zenpad is bricked! It would be of great help! thanks!
Pires_7 said:
hello friend, can you please upload that file? I deleted it, but now I need it to revert to official recovery, as my zenpad is bricked! It would be of great help! thanks!
Click to expand...
Click to collapse
Your ZenPad didn't brick because you deleted install_recovery.sh. It's because you modified the system partition. Making any mods to system is bad advice unless you know exactly what you're doing. Even mounting it in r/w mode can break it. That's because dm-verity has tripped and is blocking access to changed blocks of the file system. So you have 3 options: mod your boot image fstab file to disable dm-verity, restore the original system image block-for-block (either from backup or official firmware converted to an img file), or wipe userdata (lss reported that to work).
Pires_7 said:
hello guys, you think lineage os official version for asus z380kl (p024) will work on our z380m ?
Click to expand...
Click to collapse
Nope, no chance.
diplomatic said:
Your ZenPad didn't brick because you deleted install_recovery.sh. It's because you modified the system partition. Making any mods to system is bad advice unless you know exactly what you're doing. Even mounting it in r/w mode can break it. That's because dm-verity has tripped and is blocking access to changed blocks of the file system. So you have 3 options: mod your boot image fstab file to disable dm-verity, restore the original system image block-for-block (either from backup or official firmware converted to an img file), or wipe userdata (lss reported that to work).
Nope, no chance.
Click to expand...
Click to collapse
Ok. I made some real s*it, I think I deleted every partition except recovery. Can you provide me a twrp backup or some way around my problem?
What do you mean you deleted every partition except recovery? There's like 28 partitions. You would have to work hard to accomplish that.
My first suggestion is to extract a system.img from the Asus stock firmware zip using this. Then flash it with SP Flash Tool. You might also try to install a full firmware zip from TWRP. Although I have no idea if that will work or if it's even safe to try.
diplomatic said:
What do you mean you deleted every partition except recovery? There's like 28 partitions. You would have to work hard to accomplish that.
My first suggestion is to extract a system.img from the Asus stock firmware zip using this. Then flash it with SP Flash Tool. You might also try to install a full firmware zip from TWRP. Although I have no idea if that will work or if it's even safe to try.
Click to expand...
Click to collapse
i was able to extract system.new.dat from stock firmware zip, but it extracts to a system folder. How do I flash this through sp flash tool?
OK, the system folder you don't need. It should have produced a system.img file also. That's the file you need to flash. Just select it for the system partition row in the partition list and then Download. Hopefully that will be enough.
EDIT: I just looked at the script, and realized the system.img.img file gets deleted in the process. So what you need to do is start the extraction, then after it makes system.img.img, when it starts extracting individual files, hit Ctrl+C. Then you'll end up with the img file.
Thank you very much! it works! YOU are the BEST!
please tell me, in your scatter file, address partition_name: frp (0x80a5000) is correct? if i format this partition (frp), google account remove?
I just bought a Nuu R1 Rugged Phone. It has Oreo 8.1.0 on it.
It is an "unlocked" phone. But I don't know if unlocked refers to the phone carrier or to the boot loader. (I'm thinking phone carrier.)
The last I rooted my tablets was Android 5, which required using a custom script that a dev here wrote that temporarily ran CW via fast boot.
I would like to root my R1. I hear now that Magisk is the way to go. (Instead of SU.)
Most every Guide says that I have to have TWRP installed before installing Magisk. But there's no TWRP for the R1. And I am incapable of compiling my own.
I learned, from Nuu Tech Support, that I can get into the phone's Recovery mode with some hidden button pushes. Here's a screen shot:
My first question is, could I simply install Magisk by selecting "Update from SD card"?
If it's not that easy, then, second: I can also get to a fastboot screen. (Not shown here.) Could I install Magisk from ADB on my computer?
I suppose a third question: Is there a version of TWRP that's compatible with this phone? And if so, how do I find it? It would be nice to have a Nandroid backup.
I am willing to show various screens that come up from various button pushes if that would help a dev here.
More data for TWRP'ing
So, I see that one needs an image of the OEM ROM to compile TWRP. I found two sites on the web that claim to have the ROM. (Before the R1 was officially released.) Sounds sketchy. Will try to get an image from Tech Support.
In the meantime, I found that the bootloader can be unlocked (or allowed to be unlocked) via a setting under Developer Options.
I contacted Nuu Mobile Support and they were kind to send me the MediaTek USB drivers for the R1.
It was a two step process to get the driver installed for ADB. But now I have access to the R1 via ADB.
I read here on the forums that I can boot TWRP via fastboot, and not risk ruining/corrupting the R1's Recovery Partition.
Anyone know of a TWRP model version that's close enough to work on the R1? (I presume a TWRP for another MediaTek device might work?)
I would hate to try KingRoot to get root.
I found a website called unofficialtwrp.com. It has a TWRP for the MediaTek 6739, running Oreo 8.1, with 16/2 GB. That's exactly what the Nuu Mobile R1 has.
So, hopeful that this would allow me to root my R1, I tried it. (Short version: Didn't work.)
I already had ADB installed and could talk to my R1 via ADB.
But once the R1 had booted into fastboot mode via ADB, I got a message from fastbood devices that it was "waiting."
I learned that that message means that I didn't have drivers for fastboot.
I ended up installing a fresh version of Win8.1 and using the Windows' updater to find the needed drivers. I had to have the R1 plugged in to the USB in fastboot mode for this to work. After that, I could talk to the device via the fastboot command.
So I unlocked the boot loader (which wiped my data - not every Guide warns you about that) and I did "fastboot boot recovery.img."
I got the message that the recovery file had transferred. After abotu 15 seconds, the phone rebooted. But no TWRP.
Rats.
I didn't want to try the fastboot flash command in case this unoffiical twrp from an unofficial site bricked my phone. If I understand things correctly, booting in fastboot to the recovery.img should give me a temporary instance of TWRP.
Presumably, after copying Magisk into memory, I would be able to get root that way.
PMikeP said:
I found a website called unofficialtwrp.com. It has a TWRP
Click to expand...
Click to collapse
Whoa you have been busy you must've heard XDA helps those who help themselves.. :highfive:
I just dropped by to say, 1st rule of modding is taking a pristine stock backup..
For MTK devices, there is a tool called SP Flash Tools, a quick search will help you take a full backup using this tool.
Afterward, you can even try using SP Flash Tools to flash a Magisk patched boot image to your device for ROOT!
Hope this helps!
Thanks. I did see SP Flash Tools mentioned and I did take a look at it. While I've rooted before, I'm trying to get my head around a Scatter File.
Everything I've read so far - well, almost everything - says that I need TWRP to get Magisk installed. But if you think it can be done via SP Flash Tools, I'll start playing with it.
Root nuu r1
Did u ever manage to figure out how to do this & get TWRP to install? :fingers-crossed:
No, I haven't had time to play with rooting lately. I still would like to root it tho.
Anyone know how to root the nuu phones?
someone has the boot.img i need the image
I will port TWRP for you in case you have stock recovery.img
jjgvv said:
I will port TWRP for you in case you have stock recovery.img
Click to expand...
Click to collapse
plis
do you have stock rom?
INFINIX HOT S 3 ROOTING PROCEDURE WITH LOCKED BOOTLOADER
Things You must First Do
1. Install Qualcomm drivers for your PC
2. Learn how to remove the device back cover:
3. Learn how to boot the device to EDL mode :
4. Learn how to backup your device full firmware with a box like miracle box or cracked version :
5. Learn how to flash firmware with QFIL tool version 2.0.1.9 :
PROCEDURE 1
1. Get hold of your device full stock firmware. Some build numbers do not have stock firmware especially my Hot S3 build number do not have correct stock firmware.
2. Install latest official magisk manager apk.
3. Copy stock boot.img to your device internal storage.
4. Launch magisk manager app, select install magisk 18.1v or any version that will appear, there will be an options select patch boot.img. Now locate where you stored your boot.img. After patch magisk will show you the location of the patched bootimg.
5. Copy the patched boot.img into the device firmware folder. Remove the original boot.img from the firmware folder and save it somewhere and rename the patched boot.img to boot.img.
6. Now launch the QFIL tool and flash using the previous procedure.
7. After successful flash, boot to the device recovery (Volume up + power button) wipe partition and factory wipe, then power off and reboot.
8. After reboot update Google play store and services sign into your account successfully to have a recognize certify device. Install magisk manager apk. Launch magisk manager app, update and install any other updates that will pop up. Every installed thing in magisk will show green.
9. Reboot. The device successfully rooted.
NOTE:
1. Those who have their correct official firmware and have tested and working correctly, there will be firehose file, patch0 file, rawprogram0 files, NON-HLOS file. These are the necessary files for the flashing.
2. Those who don't have the correct stock firmware use the backup firmware from the miracle and rename these files as;
boot= boot.img
Cache= cache.img
dummy= dummy.img
misc= misc.img
persist= persist.img
recovery= recovery.img
splash= splash.img
system= system.img
userdata= userdata.img
aboot= emmc_appsboot.mbn
Modem=NON-HLOS bin
The rest of the files add .mbn to it end.
You need:
patch0.xml
rawprogram0.xml
prog_emmc_firehose_8937_ddr.mbn
if you don't have these files I will upload my full prepared stock firmware so that you take all the necessary files from it into yours and flash.
But if you have any downloaded stock HOT S 3 firmware with only one system and vendor inside you can use it.
3. Those who have their stock firmware, if the system and vendor in the folder is in multiple form meaning more than one ( system and vendor are in parts) you can't use QFIL tool to flash, it require different flash tool. Use your backup firmware.
4. If any find things difficult I will upload my stock firmware so that all builds can use to create their own stock firmware.
Thank you.
5. After every flash try to remove battery cable and replace for some seconds when the device cover is opened.
6. At a point where the device refuse to boot or power off, long press power button to power off or reboot.
7. Do not be in haste, take your time to follow all these procedures to avoid the device going dead. Because a device does not go dead in my hands. It may brick but when you use good and required flash files everything will be okay.
With ease, convenience and future developments for the device I have created Facebook group for that because some informations are hard to come by. I have posted a lot of help in different forums, nobody seems to help, so this how far I have gone. Now trying to Port custom recovery like twrp for the device even though bootloader is locked.
Procedure 2
1. Follow procedure 1 to backup device
2. Patch boot.img with magisk manager
3. Copy patched image rename as boot.img into backup folder.
4. Flash only the patched boot.img by any supported tool.
5. Reboot device install magisk manager apk reboot and update magisk done.
Those who have already rooted or gone far with the device can join the facebook group or provide me better links. Thanks
Facebook Group Link: https://www.facebook.com/groups/324251668449205/
CREDITS
Thanks to XDA for creating this wonderful platform
The best App ever magisk
The best tool ever Miracle box
Hamenth Jabalpuri my best friend XDA Senior Member
Thanks to everyone.
CAUTION
If any want to use this information in his site, don't forget to credit XDA.
TWRP LINK
https://forum.xda-developers.com/android/development/unofficial-twrp-infinix-hot-s3-x573-t4064705
Skyhuppa said:
Hamenth Jabalpuri my best friend XDA Senior Member
Click to expand...
Click to collapse
Thank you too for sharing this.....
Great tutorial thx
i can't get into edl mode
i used the shorting method via the back cover.. the device was blinking... was detected in device manager but when i clicked on port inside miracle box... nothing happened
i am trying to dump the firmware
Skyhuppa said:
INFINIX HOT S 3 ROOTING PROCEDURE WITH LOCKED BOOTLOADER
Click to expand...
Click to collapse
aus7een said:
i used the shorting method via the back cover.. the device was blinking... was detected in device manager but when i clicked on port inside miracle box... nothing happened
i am trying to dump the firmware
Skyhuppa said:
INFINIX HOT S 3 ROOTING PROCEDURE WITH LOCKED BOOTLOADER
Click to expand...
Click to collapse
I'm not getting your device blinking well but;
1. Make sure your device driver 9008 in edl mode installed well. When you open device manager you must see driver 9008 for your device. Download driver
https://www.allmobitools.com/download/Qualcomm_HS_USB_QDLoader_9008_Driver_Download.zip
2. If you are using windows 10 make sure you disable driver signature before installing any driver on your computer
3. Make sure you disconnect and reconnect battery cable on the board before and after every connection.
4. Use the miracle tutorial when you see driver Qloader 9008 in device manager after connecting device.
5. You must connect the two edl points well. Poor connection boot to battery charge.
6. Use miracle 2.82 version
Click to expand...
Click to collapse
did you have TWRP for infinix hot s3?
Nice well done thanks for sharing
agnitoya said:
did you have TWRP for infinix hot s3?
Click to expand...
Click to collapse
Not yet unless bootloader is fully unlocked.
Flash???
which file should i flash it,becouse i dont have the file... and almost all my frimware have .bak at the end so which flasher i should use,QFIL or others? heres the link of the pic of it
Nthn_Knt said:
which file should i flash it,becouse i dont have the file... and almost all my frimware have .bak at the end so which flasher i should use,QFIL or others? heres the link of the pic of it
Click to expand...
Click to collapse
Where did you get the .bak firmware files? Qfil can't flash such firmware. Use mobilsea tool or emmc tool.
Skyhuppa said:
INFINIX HOT S 3 ROOTING PROCEDURE WITH LOCKED BOOTLOADER
Things You must First Do
1. Install Qualcomm drivers for your PC
2. Learn how to remove the device back cover:
3. Learn how to boot the device to EDL mode :
4. Learn how to backup your device full firmware with a box like miracle box or cracked version :
5. Learn how to flash firmware with QFIL tool version 2.0.1.9 :
PROCEDURE 1
1. Get hold of your device full stock firmware. Some build numbers do not have stock firmware especially my Hot S3 build number do not have correct stock firmware.
2. Install latest official magisk manager apk.
3. Copy stock boot.img to your device internal storage.
4. Launch magisk manager app, select install magisk 18.1v or any version that will appear, there will be an options select patch boot.img. Now locate where you stored your boot.img. After patch magisk will show you the location of the patched bootimg.
5. Copy the patched boot.img into the device firmware folder. Remove the original boot.img from the firmware folder and save it somewhere and rename the patched boot.img to boot.img.
6. Now launch the QFIL tool and flash using the previous procedure.
7. After successful flash, boot to the device recovery (Volume up + power button) wipe partition and factory wipe, then power off and reboot.
8. After reboot update Google play store and services sign into your account successfully to have a recognize certify device. Install magisk manager apk. Launch magisk manager app, update and install any other updates that will pop up. Every installed thing in magisk will show green.
9. Reboot. The device successfully rooted.
NOTE:
1. Those who have their correct official firmware and have tested and working correctly, there will be firehose file, patch0 file, rawprogram0 files, NON-HLOS file. These are the necessary files for the flashing.
2. Those who don't have the correct stock firmware use the backup firmware from the miracle and rename these files as;
boot= boot.img
Cache= cache.img
dummy= dummy.img
misc= misc.img
persist= persist.img
recovery= recovery.img
splash= splash.img
system= system.img
userdata= userdata.img
aboot= emmc_appsboot.mbn
Modem=NON-HLOS bin
The rest of the files add .mbn to it end.
You need:
patch0.xml
rawprogram0.xml
prog_emmc_firehose_8937_ddr.mbn
if you don't have these files I will upload my full prepared stock firmware so that you take all the necessary files from it into yours and flash.
But if you have any downloaded stock HOT S 3 firmware with only one system and vendor inside you can use it.
3. Those who have their stock firmware, if the system and vendor in the folder is in multiple form meaning more than one ( system and vendor are in parts) you can't use QFIL tool to flash, it require different flash tool. Use your backup firmware.
4. If any find things difficult I will upload my stock firmware so that all builds can use to create their own stock firmware.
Thank you.
5. After every flash try to remove battery cable and replace for some seconds when the device cover is opened.
6. At a point where the device refuse to boot or power off, long press power button to power off or reboot.
7. Do not be in haste, take your time to follow all these procedures to avoid the device going dead. Because a device does not go dead in my hands. It may brick but when you use good and required flash files everything will be okay.
With ease, convenience and future developments for the device I have created Facebook group for that because some informations are hard to come by. I have posted a lot of help in different forums, nobody seems to help, so this how far I have gone. Now trying to Port custom recovery like twrp for the device even though bootloader is locked.
Procedure 2
1. Follow procedure 1 to backup device
2. Patch boot.img with magisk manager
3. Copy patched image rename as boot.img into backup folder.
4. Flash only the patched boot.img by any supported tool.
5. Reboot device install magisk manager apk reboot and update magisk done.
Those who have already rooted or gone far with the device can join the facebook group or provide me better links. Thanks
Facebook Group Link: https://www.facebook.com/groups/324251668449205/
CREDITS
Thanks to XDA for creating this wonderful platform
The best App ever magisk
The best tool ever Miracle box
Hamenth Jabalpuri my best friend XDA Senior Member
Thanks to everyone.
CAUTION
If any want to use this information in his site, don't forget to credit XDA.
Click to expand...
Click to collapse
TWRP LINK
https://forum.xda-developers.com/android/development/unofficial-twrp-infinix-hot-s3-x573-t4064705
Hi, I've just bought a Cubot P50, it's a Chinese brand and seems more than decent for the price, I've rooted it with Magisk and I want to install TWRP on it but can't find anything for that brand. Has anyone came across a TWRP that might work on it?
Marko Lyno said:
Hi, I've just bought a Cubot P50, it's a Chinese brand and seems more than decent for the price, I've rooted it with Magisk and I want to install TWRP on it but can't find anything for that brand. Has anyone came across a TWRP that might work on it?
Click to expand...
Click to collapse
I have the same phone how did you root it ? If there a guide that is safe to use ? Thank you
Unlock the bootloader first, this step will factory reset your phone https://romprovider.com/unlock-bootloader-android/
On your PC:
1. Install Fastboot driver
2. Install MediaTek_Preloader_USB_VCOM_Drivers_Setup_Signed
3. Extract platform-tools
4. On your phone, Enable Developer Options, USB debugging and OEM Unlocking
5. Unlock bootloader (this step will factory reset your phone): Phone in fastboot mode, open command prompt on PC > fastboot devices > fastboot flashing unlock. Note this will cause the phone to show the "Orange State" warning on boot up. You can ignore this or remove it later.
(If device is unauthorised in ADB or Fastboot, go to Developer Options on phone, revoke USB debugging authorisation, disable then enable USB debugging. You should now get an authorisation confirmation dialogue when you try to connect with ADB/Fastboot. If not, type "adb kill-server", then "adb devices" or "adb start-server" in the command prompt).
6. Place boot.img on phone with USB file transfer (either from stock ROM, or read from phone using SP_Flash_Tool_v5.1924_Win) and patch it with Magisk v5.2. NO need to patch vbmeta.img
7. Transfer patched boot.img back to PC
8. Flash the patched boot.img to phone either with SP Flash Tool or Fastboot command in ADB (fastboot flash boot boot.img). Take care here, make sure it's the right image going to the right location and that ALL other files are de-selected, especially the preloader file, always de-select this when flashing any firmware unless you know what you're doing!
Phone is now rooted.
How to remove orange state warning on this device:
How to remove Orange, Yellow & Red state warnings on MTK
This guide will explain how to hide or remove Yellow, Red and Orange state warnings on a Mediatek Android device. Its ideal for those who feel irritated by constantly seeing these warnings on reboot.
www.hovatek.com
Edit: If you need a stock ROM for the phone it's here https://www.cubot.net/Support/id/78/cid/19.html#hh
Good evening, I would like to know if in the future it is possible to install a twrp with a custom rom?
Thank you have a nice day.
Good evening, I would like to know if in the future it is possible to install a twrp with a custom rom on the Cubot p50?
Thank you have a nice day.
Mark8:9 said:
Good evening, I would like to know if in the future it is possible to install a twrp with a custom rom on the Cubot p50?
Thank you have a nice day.
Click to expand...
Click to collapse
It is possible that in the future, developers may create custom ROMs and TWRP recoveries for the device, especially if it becomes popular among the Android community.
If a custom ROM and TWRP recovery becomes available for your device in the future, you will be able to flash it by following the instructions provided by the developer. Keep in mind that installing custom ROMs and recoveries comes with some risks, and it is important to backup your data and follow the instructions carefully to avoid damaging your device.
Good evening, can you tell me the correct procedure for how to Root the Cubot p50 smartphone? Thank you.
Mark8:9 said:
Good evening, can you tell me the correct procedure for how to Root the Cubot p50 smartphone? Thank you.
Click to expand...
Click to collapse
Well if you really want to know that, surely you would have read the entire thread? It's not that long. I gave complete instructions 5 posts up
Marko Lyno said:
Well if you really want to know that, surely you would have read the entire thread? It's not that long. I gave complete instructions 5 posts up
Click to expand...
Click to collapse
Good evening, be patient ... but where do I find Magisk 5.2 to download and how do I install it? Thanks good evening.
Download Magisk Manager Latest Version 26.1 For Android 2023
Magisk Manager is an app which helps users to root their phone. With the help of Magisk you can run banking apps and also pass SafetyNet tests.
magiskmanager.com
Just get the latest version and follow the instructions I posted.
Thanks for your work on the Cubot phone .Im a fan of them also. I found that twrp recovery 3.40 works on the Note 20/20Pro you just have to flash vbmeta BEFORE and AFTER you flash twrp to the device. Im also seeing separate websites claiming twrp 3.40 is also used with the Cubot P40 model. I dont see why it wouldnt work with the P50. Its worth a shot. Also theres alot more "familiars" with Mediatek phones like these in Hovatek forum. Since you already have information on how to root maybe consider starting your own P50 thread over there.
My references: https://www.hovatek.com/forum/thread-44810-post-233457.html#pid233457
elimoviebuff said:
Thanks for your work on the Cubot phone .Im a fan of them also. I found that twrp recovery 3.40 works on the Note 20/20Pro you just have to flash vbmeta BEFORE and AFTER you flash twrp to the device. Im also seeing separate websites claiming twrp 3.40 is also used with the Cubot P40 model. I dont see why it wouldnt work with the P50. Its worth a shot. Also theres alot more "familiars" with Mediatek phones like these in Hovatek forum. Since you already have information on how to root maybe consider starting your own P50 thread over there.
My references: https://www.hovatek.com/forum/thread-44810-post-233457.html#pid233457
Click to expand...
Click to collapse
Thanks for that. Is there a specific vbmeta to patch it with?
Good evening, can you give me the link to download a compatible cust recovery for the cubot p50? Thank you
The link is on the page just posted above. Here's the direct link to the file:
Hovatek
Download files
www.hovatek.com
Let us know if it works please, and what steps you took.
Good evening, how will I flash the lk file? Thanks.
Hi, you will have, or should have, downloaded a zip file containing a recovery.img. The recovery.img is the file you need to flash. Then follow the instructions here:
How to Install TWRP Recovery on Any Android 2022 [100% Working]
In this article, I will be showing you how you can install TWRP recovery on any Android smartphone. By following this guide you will be able to install
magiskapp.com
The TWRP Recovery file it refers to is the one you (hopefully) downloaded from this link:
Hovatek
Download files
www.hovatek.com
BUT, you also need to flash a vbmeta file BEFORE and AFTER the recovery.img, and I'm still unsure which vbmeta file it is, as elimoviebuff hasn't replied to my question regarding that.
Marko Lyno said:
Hi, you will have, or should have, downloaded a zip file containing a recovery.img. The recovery.img is the file you need to flash. Then follow the instructions here:
How to Install TWRP Recovery on Any Android 2022 [100% Working]
In this article, I will be showing you how you can install TWRP recovery on any Android smartphone. By following this guide you will be able to install
magiskapp.com
The TWRP Recovery file it refers to is the one you (hopefully) downloaded from this link:
Hovatek
Download files
www.hovatek.com
BUT, you also need to flash a vbmeta file BEFORE and AFTER the recovery.img, and I'm still unsure which vbmeta file it is, as elimoviebuff hasn't replied to my question regarding that.
Click to expand...
Click to collapse
I get it, but I have to flash the .bin to remove the yellow/red state on boot. I don't know how to install the lk.bin file. If you can help me. Thank you.
Ah I see, you're rooting the phone first. Ok I've just checked my own notes on this, so, if you have edited the lk.img file as described in that Hovatek thread, then do as follows:
When flashing with SP Flash Tool, make sure the correct lk.img file is chosen as SP Flash Tool chooses lk-verified.img by default (click along to the right of the file list under "Location" and choose your edited lk.img file here).
OR, flash with ADB (fastboot flash lk lk.img).
Then install Magisk on your phone if you haven't already.
boot.img is for rooting the phone, lk.img is only to remove the orange state message and the 5 second delay when the phone boots, it does not actually remove it's orange state and is not needed for the phone to be rooted.
To un-root, you should just flash the original boot.img and lk-verified.img from the stock firmware ROM file.
Marko Lyno said:
Ah I see, you're rooting the phone first. Ok I've just checked my own notes on this, so, if you have edited the lk.img file as described in that Hovatek thread, then do as follows:
When flashing with SP Flash Tool, make sure the correct lk.img file is chosen as SP Flash Tool chooses lk-verified.img by default (click along to the right of the file list under "Location" and choose your edited lk.img file here).
OR, flash with ADB (fastboot flash lk lk.img).
Then install Magisk on your phone if you haven't already.
boot.img is for rooting the phone, lk.img is only to remove the orange state message and the 5 second delay when the phone boots, it does not actually remove it's orange state and is not needed for the phone to be rooted.
To un-root, you should just flash the original boot.img and lk-verified.img from the stock firmware ROM file.
Click to expand...
Click to collapse
Good morning. Thank you for the information given.
I wanted to ask: is it necessary or useful to install an antivirus on your smartphone now that it's been rooted? Thank you.
I haven't but that's just down to personal choice really. It's certainly useful if you like to try stuff from unknown sources, although personally I've rarely encountered viruses on Android. I'm not saying they don't exist though.
Have you successfully rooted your phone then? What about TWRP, have you tried that yet?