Related
I hit a wall with this issue. After rooting and trying to install a new rom, I am getting the security error on the LG logo. I can access updater with vol+ and insert usb, but I am stuck on how to restore anything or access boot menu. Any suggestions? The computer no longer seems to be able to access the phone as a device via command prompt.
Thanks in advance!
See thread above you...
Sent from my LG-P769 using xda app-developers app
I searched but could not decipher a clear way to fix the problem. This is what I did to fix it.
Open LG Mobile Update (Make sure you have internet on)
Input MEID (located behind battery)
Connect phone to computer via USB in S/W upgrade mode (Vol+ then insert USB)
Let LG download and install phone recovery
NOTE: Recovery stopped at 4% install, but just leave it alone, and it will install correctly. It never went past 4%
NOTE: This will return your phone to factory settings like the day you got it, so you will have to re-root if you use this method.
There may be a way to fix this without losing root, but this was the only way I could figure out.
rarsenaux said:
I searched but could not decipher a clear way to fix the problem. This is what I did to fix it.
Open LG Mobile Update (Make sure you have internet on)
Input MEID (located behind battery)
Connect phone to computer via USB in S/W upgrade mode (Vol+ then insert USB)
Let LG download and install phone recovery
NOTE: Recovery stopped at 4% install, but just leave it alone, and it will install correctly. It never went past 4%
NOTE: This will return your phone to factory settings like the day you got it, so you will have to re-root if you use this method.
There may be a way to fix this without losing root, but this was the only way I could figure out.
Click to expand...
Click to collapse
So,,, How long i must waiting for upgrade recovery completed?
arakenzy said:
So,,, How long i must waiting for upgrade recovery completed?
Click to expand...
Click to collapse
less than 10 minute
rarsenaux said:
I searched but could not decipher a clear way to fix the problem. This is what I did to fix it.
Open LG Mobile Update (Make sure you have internet on)
Input MEID (located behind battery)
Connect phone to computer via USB in S/W upgrade mode (Vol+ then insert USB)
Let LG download and install phone recovery
NOTE: Recovery stopped at 4% install, but just leave it alone, and it will install correctly. It never went past 4%
NOTE: This will return your phone to factory settings like the day you got it, so you will have to re-root if you use this method.
There may be a way to fix this without losing root, but this was the only way I could figure out.
Click to expand...
Click to collapse
I opened a Lg Support tools, find my phone, and when start analyzing phone settings, don´t go ahead stoped a long time on this screen
arakenzy said:
So,,, How long i must waiting for upgrade recovery completed?
Click to expand...
Click to collapse
It depends on your internet connection. The process should take about 1 to 3 hours.
Sent from my LGMS769 using XDA Premium 4 mobile app
I'm stuck right at the end of checking phone settings
kuma82 said:
It depends on your internet connection. The process should take about 1 to 3 hours.
Sent from my LGMS769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
My LG mobile updater stops just at the end of "checking phone settings" the bar at the bottom shows anywhere from 10 to 15 seconds and stops counting. I never see a %. Is it doing anything?
---------- Post added at 07:17 PM ---------- Previous post was at 07:08 PM ----------
rarsenaux said:
I searched but could not decipher a clear way to fix the problem. This is what I did to fix it.
Open LG Mobile Update (Make sure you have internet on)
Input MEID (located behind battery)
Connect phone to computer via USB in S/W upgrade mode (Vol+ then insert USB)
Let LG download and install phone recovery
NOTE: Recovery stopped at 4% install, but just leave it alone, and it will install correctly. It never went past 4%
NOTE: This will return your phone to factory settings like the day you got it, so you will have to re-root if you use this method.
There may be a way to fix this without losing root, but this was the only way I could figure out.
Click to expand...
Click to collapse
Do you have a download link for the updater that asks for the IMEI? My LG Mobile Updater only asks for phone model.
Also, am I supposed to be doing a regular software update or "upgrade recovery" option?
kg4krw said:
...
Also, am I supposed to be doing a regular software update or "upgrade recovery" option?
Click to expand...
Click to collapse
Hi kg4krw, you could try "upgrade recovery" option.
Cheers. Good luck.
Sent from my LG P76020L-EUR-XX unlocked and rooted
I need help. ;(
arakenzy said:
So,,, How long i must waiting for upgrade recovery completed?
Click to expand...
Click to collapse
Help! it says that my lgms769 is up to date, and everytime i get passed the analysis to download the software, it doesnt download anything, and says time elapsed 23 at the bottom ;( please help me ;(
swaggyp said:
Help! it says that my lgms769 is up to date, and everytime i get passed the analysis to download the software, it doesnt download anything, and says time elapsed 23 at the bottom ;( please help me ;(
Click to expand...
Click to collapse
bro make sure you have unlocked bootloader if you haven't
check the android development forum you will get scripts to put phone in fastboot.
unlock the bootloader
flash CWM recovery
download nanadroid back up for your phone model. from general section.
copy it to ext sdcard, and restore your phone via cwm reovery.
LG's flashing software is just pain to use. use CWM to restore your L9/
er.davinder said:
bro make sure you have unlocked bootloader if you haven't
check the android development forum you will get scripts to put phone in fastboot.
unlock the bootloader
flash CWM recovery
download nanadroid back up for your phone model. from general section.
copy it to ext sdcard, and restore your phone via cwm reovery.
LG's flashing software is just pain to use. use CWM to restore your L9/
Click to expand...
Click to collapse
The problem is my phone cant be read, it doesnt appear. Ever since i tried to install a custom rom, my phone shut off and everytime it turns off and says security error then turns back off.
?
rarsenaux said:
I searched but could not decipher a clear way to fix the problem. This is what I did to fix it.
Open LG Mobile Update (Make sure you have internet on)
Input MEID (located behind battery)
Connect phone to computer via USB in S/W upgrade mode (Vol+ then insert USB)
Let LG download and install phone recovery
NOTE: Recovery stopped at 4% install, but just leave it alone, and it will install correctly. It never went past 4%
NOTE: This will return your phone to factory settings like the day you got it, so you will have to re-root if you use this method.
There may be a way to fix this without losing root, but this was the only way I could figure out.
Click to expand...
Click to collapse
Mines doesnt even download, it just says time elapsed 22 on the software section on the lg mobile update
Thanks in advance.
swaggyp said:
The problem is my phone cant be read, it doesnt appear. Ever since i tried to install a custom rom, my phone shut off and everytime it turns off and says security error then turns back off.
Click to expand...
Click to collapse
swaggyp said:
Mines doesnt even download, it just says time elapsed 22 on the software section on the lg mobile update
Thanks in advance.
Click to expand...
Click to collapse
Connect the phone without battery to computer and install fast boot drivers for omap chipset. Again check the dev section " how to install fast boot drivers"
Unlock the darn boot loader
Flash CWM recovery
Restore via nandroid back .
Offline flash method is bit completed and may not work every time
After trying to restore a nandroid backup via CWM, phone is hard-bricked. Sent to service, where they changed (mother)board.
Just for those, who lost their faith (in LG9) - when you see 'security error' on each boot (like I saw yesterday) after flashing CWM on not unlocked bootloader and, after stock ROM flashing, you see dead android with exclamation heart outside - it is normal, and it is still OK - thanks to bootloader being locked
- u can use any good method to flash stock ROM back - I have used this program combined with official LG Mobile Supprt Tool
- I have turned phone off (by battery removing for a moment)
- kept Volume up pressed when connecting to USB - I had no message that any phone is connected - I didn't bother
- flashed stock (20o in my case)
- saw 'dead' android with its exclamation heart outside - bothered for a moment
- removed battery to restart phone
- I have found that all is working :laugh: back
- rooted with Kingo in a minute
- then a step u can omit - I passed the whole procedure again, as I'm faster then smarter
All done with W8/64-bit and my 10cm nokia usb cable, which I found the best in flashing when some longer or 'filtered' cables do not see the phone
I recently switched phones(both same model optimus fuel due to loose heaphone connection) long story short all my info is on 1st phone(important texts/phone numbers) I only have one battery to share between the two phones(wasn't huge deal!) I could just put battery back in my old phone if I needed info from an old text ect! today I put battery back in and tried to turn it on all it does is blink on and off the screen with Lg logo and security error comes up(won't go anywhere else??) can't understand how all of a sudden this happened sitting around with no battery in it nor was it jarred gotten wet ect?? any help appreciated call or text me at(814)493-7199 Jim thanks
How to unbrick P760 and others, how to install cyjangenmod
How to unbrick P760, how to install cyjanogenmod 6.1
after many hours spend i fixed my two phones l9 - p760
how to:
system xp or windows server 2003 - others dont work for me: 7 and 10
insall drivers - most important omap4430
open program lg B2CAppSetup (LGMobile Support Tool)
use "additional function" - emergency retrieve system
next put your imei number (under battery 15 digits)
push vol+, connect usb cable to phone, put battery and wait like 5 sect till s/w upgrade message appear on phone
in lg application press verification button, now start dowlnoading system and installation
thats it, after 30 minutes you have unbricked phone (any case like: security error, blinkin logo, stay on logo etc)
________________________________________
How to instal android 6.01 marshmallow:
Install root, dowload kingo root, set phone in developer mode: usb debugging, click roo - thats it.
next dowload program flashify
install recovery: twrp-3.0.2-0-p760.img
back and install zip from this page (cyajnogenmod 13)
remember to check twrm and wipe partition - check all options, then reboot
system will instaling from your internal memory (if you put move here )
next you need install gapps, several dont working so dowlnoad this one: A-GAPPS_6.0.1_09022016.zip
how to do that, how to reboot in recovery mode - just click five times in: settings, phone information, number of compilation, exit to settings and find developer options, plug in. here you can plug on root, also advanced reboot to recovery mode to install for example gapps
next enable advanced reboot option. click on power button and reboot in recovery mode
install gapps
now you have working play store
to fix gps for Pokemon go - i did all of this for my two boys search in xda:
I hope i help to somebody.
for me was terrible try to install all of this but i cant belive now how l9 is fast compare to 4.1.2 stock system
regards
Pawel
Ps. no links but the names of application / files you can find on xda for sure.
corrinti said:
Just for those, who lost their faith (in LG9) - when you see 'security error' on each boot (like I saw yesterday) after flashing CWM on not unlocked bootloader and, after stock ROM flashing, you see dead android with exclamation heart outside - it is normal, and it is still OK - thanks to bootloader being locked
- u can use any good method to flash stock ROM back - I have used this program combined with official LG Mobile Supprt Tool
- I have turned phone off (by battery removing for a moment)
- kept Volume up pressed when connecting to USB - I had no message that any phone is connected - I didn't bother
- flashed stock (20o in my case)
- saw 'dead' android with its exclamation heart outside - bothered for a moment
- removed battery to restart phone
- I have found that all is working :laugh: back
- rooted with Kingo in a minute
- then a step u can omit - I passed the whole procedure again, as I'm faster then smarter
All done with W8/64-bit and my 10cm nokia usb cable, which I found the best in flashing when some longer or 'filtered' cables do not see the phone
Click to expand...
Click to collapse
Can someone answer what flashing does NOT mean.
1) It does NOT wipe your user data, correct?
2) It means fix the OS to make the phone start up (without affecting user data), correct?
3) I see people give advice to flash or use S/w recovery tool. But I need confirmation that it doesnt factory wipe or delete user data.
4) Or please tell me what method I should do to preserve the internal SD card, or harvest it, or if there is a way to connect the cord in a certain [phone mode] so I can download the data from a phone that wont start (logo loop).
Thanks.
Oh, you cited me and if u mean LG L9 - I do not remember exactly now, it was a short adventure. There is no general answer to your questions 1 - 3, it depends on the data organization in the system. As far as I remember it was OK for the given procedure, but not for sure . maybe someone else can help. And good but too late for you advice is to make copies of all important data and settings before u try to change anything in your system.
t5678 said:
Can someone answer what flashing does NOT mean.
1) It does NOT wipe your user data, correct?
2) It means fix the OS to make the phone start up (without affecting user data), correct?
3) I see people give advice to flash or use S/w recovery tool. But I need confirmation that it doesnt factory wipe or delete user data.
4) Or please tell me what method I should do to preserve the internal SD card, or harvest it, or if there is a way to connect the cord in a certain [phone mode] so I can download the data from a phone that wont start (logo loop).
Thanks.
Click to expand...
Click to collapse
Pls help me root my zte obsidian running android 5.1 Model NO. Z820
I need help too
I also have ZTE obsidian tmobile and really want to root it i cant do much because it only comes with 4gb of space and i cant move apps to the SD card till i root Please help find a root
yeah same issue here all say that it cant after like 10-15 mins its just like nope sry
have you used this
http://forum.xda-developers.com/cro...oolbox-android-one-toolkit-one-click-t3030165
Yes, I tried. Its not working.
Is there any other way. I am desperate. It doesnt allow to move the Apps to SD card. There is no way. Locked in 4GB
I have a z820 in need of root as well. I've tried everything, including the link up there, and so far.....nope. Nothing. No apps to SD for me either.
Zte can't root for ****!!!!
I'm so mad because I really tried everything even a computer won't let me tried everything there to like why would the make a zte that can't even move your games or pictures or music to your SD card knowing danm well everybody gone need like we only got 4g that's nothing so what are we so posted to do delete stuff that we like.to trade for the other that we really don't need **** I'm pissed right now I know y'all are to but if anybody finds something please send me the info or con me by [email protected] thank you:good:
Needs update
This Phone really needs an update, it reboots and sucks, we can't even get into fastboot or anything to try to unlock the bootloader someone needs to make this possible because who in the hell uses only 4gb of storage, apps are so big and you can only download like 3 apps then you have to get rid of something if you want another app and its dumb so please someone..HELP US :crying:
Throwing my post up here so I can follow. Need root bad on this thing. I am using lite versions of every app. Lol
Same problem w/ ZTE obsidian..tCan't move to SD card. Anybody figure somethcing out yet?
I've gotten Kingroot to attempt to root it once and the results varied. Usually got 16% but the highest was almost 30% but I can't even get kingroot to even root it anymore.
The phone is not going into fastboot at all. I think the bootloader is locked. The phone will never be rooted.
I might of found a way, but it's untested so, proceed at your own risk, I am not responsible if your phone becomes bricked.
Enable developer mode and tick "OEM Unlocking" in the developer menu
Download SuperSU update zip from Chainfire's site and put it on your sdcard (internal won't work)
Power off your phone and hold power and volume up
Select recovery, wait for the android with the lid open to show up
Hold power and volume up for a couple seconds and let go
A menu should pop up, if not try again until it does
Select "update from sdcard"
Select the SuperSU zip
Let it flash the zip (shouldn't take long)
Choose reboot
See if SuperSU is installed and test that it works
Again, this is untested and would need a couple of people testing it to make sure it works flawlessly, so if this worked, please post that it did.
Nope. Thank you though.
picsles said:
Nope. Thank you though.
Click to expand...
Click to collapse
Any type of error happen or did it not allow it to flash at all?
I can't even get to recovery. Gives me the choice then goes to dead android guy.
Sent from my LGL21G using Tapatalk
Musicmanmike said:
I can't even get to recovery. Gives me the choice then goes to dead android guy.
Sent from my LGL21G using Tapatalk
Click to expand...
Click to collapse
You have to hold down power and vol up for like 2 seconds when you get to the dead android, then you'll get the recovery menu.
When I try to install the update package, I get 'opening update package' followed after less than a second by 'installation aborted'.
I powered down from the Developer Options screen with OEM unlock turned on when trying to update - it appears to turn off during boot as it is off again on restart.
Any suggestions? I looked at the logs that are visible from the recovery screen but they did not seem to have anything useful. Are there logs I can retrieve via ADB to see what the issue is?
My phone has build B18.
Kurrelgyre said:
When I try to install the update package, I get 'opening update package' followed after less than a second by 'installation aborted'.
I powered down from the Developer Options screen with OEM unlock turned on when trying to update - it appears to turn off during boot as it is off again on restart.
Any suggestions? I looked at the logs that are visible from the recovery screen but they did not seem to have anything useful. Are there logs I can retrieve via ADB to see what the issue is?
My phone has build B18.
Click to expand...
Click to collapse
OEM Unlocking is always on for me even after restarts but I haven't tried to flash SuperSU yet. You might wanna get a logcat while doing it and post it here to see if anyone knows what the problem is. I have an older build of the phone (B03) but I dunno if it matters or not.
EDIT: Also every new Kingroot build allows you to attempt to root it for like 2 days and then it just can't for some reason but the thing with 18% still happens.
LUModder said:
You might wanna get a logcat while doing it and post it here to see if anyone knows what the problem is. I have an older build of the phone (B03) but I dunno if it matters or not.
Click to expand...
Click to collapse
The logcat I am familiar with is in ADB. The only way I can find to access the phone from recovery with ADB is to select the flash from ADB option, which puts the phone in sideload mode where you can't pull data off. I was unsure if trying to load the ZIP that way would brick the phone so I haven't tried it.
I also tried using Fastboot and it doesn't recognize the phone at any time.
Is there another way to capture what is happening with the update?
I tried selecting restart in bootloader from the recovery menu with the phone connected to the PC. It stayed at the ZTE splash screen for over 10 minutes but neither fastboot nor ADB was able to communicate with it. I tried various key combinations without effect and finally ended up pulling the battery. Maybe it just froze up during boot for some reason.
I have tried every one-touch root I can find, none of them work. All the manual guides start with unlocking the bootloader - which I can't find any info on for this model. Based on the partition info, it's definitely locked: it has 27 (!) partitions including names like seccfg and oemkeystore. Is this normal for a lollipop device?
Hey guys, please forgive me for any bad etiquette or lack of information (any information I can provide is available upon request if I leave anything out). I am new to forums in general and especially to XDA, which seems like a good place to get help.
I recently purchased a Sony Xperia Z2 Tablet from Craigslist under the assumption it was a fully unlocked tablet not associated to a carrier. Turns out it was a Verizon Z2 tablet. I dislike Verizon with a firey passion and without getting into too many details, I'm fairly certain they won't help me because a) this tablet wasn't purchased through them as a customer and b) Verizon and I have bad history (unauthorized account modification, shady charges, etc.)
So I thought I'd do my best to make the tablet mine since the asshole who sold it to me has ceased all contact and I don't know how to get a hold of him anymore. No receipt and a data-less tablet.
Anyway, I successfully rooted the tablet and began installing apps that I installed for my G4 when I rooted it (SuperSU, Adaway, Greenify, etc.)
Things were going well but I realised I wanted anything that had to do with Verizon removed from the tablet so I was going to flash Cyanogenmod onto it with a guide I found online. Now rooting and installing custom recoveries was familiar territory and I did these flawlessly. It had TWRP and I made a backup of the system -no Nandroid, sadly-and I began the flashing process. The process said it completed without issue and I went to reboot my device. Enter my current situation:
The device, when I attempted to turn it on, all it did was vibrate constantly until I let go of the power button. Attempting to enter recovery mode (green LED, power + vol down) it showed me, instead of TWRP, a very basic recovery mode with basic options. "Continue booting up", "enter safe mode", "system recovery", and "power down". I tried entering safe mode and it just shut back down, I tried doing a system recovery and it shut down. The only time I ever see the "SONY" logo is if I'm entering this mode. I can enter what I assume is "fastboot mode" (power + vol up and plugging the device into a PC). Nothing on the screen but the LED is blue. I am trying to find guides to restore it if I can and it all looks promising but the only things I know how to really do are root and install custom recovery. I know there are PC tools I can use to send commands to it while it's in fastboot, or send commands in general I just don't know where to begin.
Does anyone know how to fix this? I know it was from Verizon, which sucks, and I know the problem most likely occurred with the attempted flashing of Cyanogenmod. I think I read somewhere I might have done something regarding mismatching kernal numbers. I couldn't find a way to unlock the bootloader so I assume that had something to do with it too.
If someone could give me a guide to restore it to at least its stock ROM where I can begin rooting and installing a custom recovery again, that would be great. Even better would be just flashing a ROM on there that doesn't need Verizon or being able to take it to a stage where it's unlocked and the only evidence it was ever with a carrier is the Verizon logo on the back. I'd really hate to think I wasted money on this and now I'm at a dead end because of a mistake I made. This was supposed to be a gift for my mom on her birthday which is coming up soon. So if anyone knows anything, or has a guide where we can at least get the thing bootable again and I'll just try and deal with a rooted locked device, that would be great.
Thanks for considerations,
Marmalade_Shaws
I have spent time on that screen too.
2 things
1. .. If you installed dual recovery, there is an up, down sequence to select the recovery.
2. Find a downgrade guide, use flashtool to flash. Ft back to stock.
Also you need to know what hardware you are running..511, 561.. And use the proper version.
There are some options with the flashtool and prf maker that can remove branding and vendor stuff. I have not tried those options.
Ez-go said:
I have spent time on that screen too.
2 things
1. .. If you installed dual recovery, there is an up, down sequence to select the recovery.
2. Find a downgrade guide, use flashtool to flash. Ft back to stock.
Also you need to know what hardware you are running..511, 561.. And use the proper version.
There are some options with the flashtool and prf maker that can remove branding and vendor stuff. I have not tried those options.
Click to expand...
Click to collapse
Sorry if this is late... But where can I find the stock? I've searched everywhere and I would need to do it from a flash tool on my PC? I could use all the help I can get.
I just had a very similar experience to the OP, seemingly identical in every way, and am curious if anyone has a solution.
ADB won't function at all, and the bootloader has blocked any sort of flashing via fastboot. Can't boot into TWRP, it goes into a very minimal "recovery," which I imagine is the stock tool, and the Factory Restore option there does absolutely nothing. Flashtool would work great if ADB / Flashmode was at all functional (device blinks and vibrates in a fashion typical of something bricked, and no connection is picked up).
Verizon Z2 Tablets are 561s.
This thing dead or is there some way to push back onto it?
I recently rooted my Lg G stylo (Metro). I was messing around with the Clockwork Mod Recovery. Long story short, I had to reboot into recovery but I keep getting a "Secure Booting Error" "Error code 1003". It keeps restarting over and over again and the same message keeps popping up. The screen doesn't pass the logo, it just shuts down after the error message shows up. repeat
There is no way to access the homescreen or anything. I trying to factory reset by holding the VOLUME DOWN + POWER KEY. It works. I get a menu that says Perform a factory reset , [Yes/NO]. When i click yes, the reset begins but after a while it shuts down and continues to repeat the same message. "Secure booting Error". "Error Code 1003". I have also been able to acces download mode where the screen would say firmware update/Usb. But idk what to do after that. Im pretty sure its not bricked since it still turns on.
Did you unlock the bootloader before you rooted or did you use one-click rooting apps to root your phone?
I have the same problem
mnunez12 said:
Did you unlock the bootloader before you rooted or did you use one-click rooting apps to root your phone?
Click to expand...
Click to collapse
The way mine happend is I tried installing twrp image with flashify and I know I installed it under the wrong one I clicked in the option above recovery anyways now I'm stuck on that.... So please help my warranty is over don't want to get a new phone.
Did figure how to recover phone?
ProblemMaker said:
The way mine happend is I tried installing twrp image with flashify and I know I installed it under the wrong one I clicked in the option above recovery anyways now I'm stuck on that.... So please help my warranty is over don't want to get a new phone.
Click to expand...
Click to collapse
i have the same problem
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
FIXED
br0adband said:
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
Click to expand...
Click to collapse
Thanks. I finally fixed it thanks to this!!!!!
how do I flash the kdz back to pure stock if I can't get past the error message? Please help, thank you!
T mobile kdz file ?
soccereclipse087 said:
how do I flash the kdz back to pure stock if I can't get past the error message? Please help, thank you!
Click to expand...
Click to collapse
Did you get a answer? Also where can I find the kdz file?
Hello, I just soft brick my MS631 this morning. I had the phone rooted perfectly fine withthe katana ROM. Then, I stupidly use the reboot recovery option that is baked into the ROM withough developer options enabled and OEM chec (I forgot). Now, I get the looping Secure Booting Error 1003. If, I do the factory reset step (hold power and vol down) I get to the factory reset options, but when I select YES, it'll go through the loop again. HELP please, as I A) cant afford another phone right now and B) don't want to go back using my Windows 640 LTE phone with MetroPCS.
botbro86 said:
Hello, I just soft brick my MS631 this morning. I had the phone rooted perfectly fine withthe katana ROM. Then, I stupidly use the reboot recovery option that is baked into the ROM withough developer options enabled and OEM chec (I forgot). Now, I get the looping Secure Booting Error 1003. If, I do the factory reset step (hold power and vol down) I get to the factory reset options, but when I select YES, it'll go through the loop again. HELP please, as I A) cant afford another phone right now and B) don't want to go back using my Windows 640 LTE phone with MetroPCS.
Click to expand...
Click to collapse
I did a similar thing. Go to HERE and follow GameTheory's unbrick guide. If you have problems downloading the KDZ like I did, then try getting it HERE
I actually did GT steps right after this post. Im now back on Katana and learned from my mistakes lol
I accidentally used king root without developer mode enabled
I also bricked my phone to the point of it being unusable. I am running on boost mobile and I am using android marshmallow 6.0. My phone said it was rooted after using the 1 Click root app and I went to start it and it now says 'security ERROR MODDED 1003'. I am stressed out at this point and I have reset it via developer menu about 3 times to no avail. I am familiar with rooting and roms but I'm not really used to using code. I'm stock everything and I am running on Boost mobile. If anyone can find a boost rom for me to use it may be possible to put my phone in download mode. I do have an sd card if it is needed to load a zip on. Please help me get my phone booted again! I believe a sprint KDZ may work but I can not find one for download anywhere. Thanks !
This may happened to me too. I am on the Boost version as well. I used the king root app to root the phone then I tried to install the adaway app. When the app told me to reboot the phone, I clicked okay but I hit the secure bootloop. I didn't even try to install a recovery. How do I fix this?!?!?!
---------- Post added at 11:01 AM ---------- Previous post was at 10:59 AM ----------
Micgizel said:
I also bricked my phone to the point of it being unusable. I am running on boost mobile and I am using android marshmallow 6.0. My phone said it was rooted after using the 1 Click root app and I went to start it and it now says 'security ERROR MODDED 1003'. I am stressed out at this point and I have reset it via developer menu about 3 times to no avail. I am familiar with rooting and roms but I'm not really used to using code. I'm stock everything and I am running on Boost mobile. If anyone can find a boost rom for me to use it may be possible to put my phone in download mode. I do have an sd card if it is needed to load a zip on. Please help me get my phone booted again! I believe a sprint KDZ may work but I can not find one for download anywhere. Thanks !
Click to expand...
Click to collapse
This may happened to me too. I am on the Boost version as well. I used the king root app to root the phone then I tried to install the adaway app. When the app told me to reboot the phone, I clicked okay but I hit the secure bootloop. I didn't even try to install a recovery.
What if you cant get the phone to do anything outside of the boot loop?
br0adband said:
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
Click to expand...
Click to collapse
i have tried holding down the volume down button and the power button at the same time but it doesnt do anything.. it makes the error code disappear for a split second and then it just comes back, it doesnt go into a normal boot option.. it doesnt go into a recovery mode of any kind to download anything to it.. can you help?
sherryf said:
i have tried holding down the volume down button and the power button at the same time but it doesnt do anything.. it makes the error code disappear for a split second and then it just comes back, it doesnt go into a normal boot option.. it doesnt go into a recovery mode of any kind to download anything to it.. can you help?
Click to expand...
Click to collapse
I wish I could offer some help but I haven't owned an LG Stylo since I made that post - I literally sold that one the following day. Hopefully someone else might be able to provide some assistance.
Good luck...
br0adband said:
I wish I could offer some help but I haven't owned an LG Stylo since I made that post - I literally sold that one the following day. Hopefully someone else might be able to provide some assistance.
Good luck...
Click to expand...
Click to collapse
Thank you so much for responding to me even though you couldnt help. . i appreciate that..
is there a way to fix it
arbyn said:
I did a similar thing. Go to HERE and follow GameTheory's unbrick guide. If you have problems downloading the KDZ like I did, then try getting it HERE
Click to expand...
Click to collapse
Sorry for the bump on this thread. I followed the unbrick guide mentioned here, and all seems like a GO... except a lost service. Screen Lock says "No Service", but I am receiving text messages from contacts.
lg ls770 (boost)
Lg stylo ls770 boost
My stylo is showing the same error 1003 and on bootloop. Can someone help me figure out where to go to get the fIles to restore it back to stock.
PM or email me if you can help TIA
help
the issue im running into using the tutorial to flash the metro kdz is it says it got disconnected from the server. any ideas?
Hi everyone, I need help (if possible).
I have a Moto Z version Xt1650-05 sheridan (Chinese version) with Android Oreo and I'm going to sell it.
A few months ago, trying to unlock the bootloader and install the TWRP, I realized I had made a mess.
I was unable to install TWRP, I don't think I have unlocked the bootloader and I deleted the Recovery stock.
In fact, trying to enter recovery mode to do a hard reset, the phone freezes on the logo of the green robot of Adroid with "No Commands" under it.
So I ask you: is there a way to restore the original Recovery Mode? Or: is it possible to do a hard reset from a Windows 10 PC?
Please help me because I have sensitive (bank) data and documents on my phone and I would like to make sure everything gets deleted before I sell it.
Please also explain to me in an easy and detailed way the procedure to follow because (as you have already understood) I understand little of these things.
(Sorry for my bad English. Thank you.) :angel:
DrFH said:
Hi everyone, I need help (if possible).
I have a Moto Z version Xt1650-05 sheridan (Chinese version) with Android Oreo and I'm going to sell it.
A few months ago, trying to unlock the bootloader and install the TWRP, I realized I had made a mess.
I was unable to install TWRP, I don't think I have unlocked the bootloader and I deleted the Recovery stock.
In fact, trying to enter recovery mode to do a hard reset, the phone freezes on the logo of the green robot of Adroid with "No Commands" under it.
So I ask you: is there a way to restore the original Recovery Mode? Or: is it possible to do a hard reset from a Windows 10 PC?
Please help me because I have sensitive (bank) data and documents on my phone and I would like to make sure everything gets deleted before I sell it.
Please also explain to me in an easy and detailed way the procedure to follow because (as you have already understood) I understand little of these things.
(Sorry for my bad English. Thank you.) :angel:
Click to expand...
Click to collapse
Try LMSA'S flash rescue option
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my ocean using XDA Labs
There's no problem with your recovery, at the no command screen you need to press and release volume down or up + power, unfortunately I don't remember the exact order to press because I use twrp a long time, but it's very easy maybe you can search google or xda to know the keys. Your recovery is FINE.