Android Kitkat 4.4.4
Let’s emphasize that-- THIS IS AN ALPHA, RELEASED FOR YOU TO PLAY WITH AND GET A SENSE OF WHAT’S TO COME. AND SOME THINGS DOESN’T WORK. REALLY. IF YOU ARE EXPECTING ANYTHING CLOSE TO PERFECTION, WALK AWAY FROM YOUR COMPUTER, LOWER YOUR EXPECTATIONS FOR AN HOUR OR SO, THEN COME BACK. MORE EXCITING DISCLAIMERS/WARNINGS IN ALL CAPITAL LETTERS CAN BE FOUND BELOW. READ THEM.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
KNOWN BUGS (what doesn't work):
- Modem in 2G mode work incorrect(Network registration don't work with some SIM cards, permanent full signal straight, problem is with audio in calls)
With 3G all is OK, Use this: Settings -> More.. in "wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only
- Conference Calls
- Some problems with audio codec settings, but generally it should
- After Recovery time to time incorrect capacity of battery
Maybe something else, what i forgot
SUPPORT
You get none. Zero. Zip. We obligate ourselves to providing nothing further. You are on your own and will have to help each other via this thread. This is provided “as-is”, and if you don’t like it, use Bada or other releases.
We basically lack time to give full dedication to this rom, and we’re looking for skilled devs who know the Android, and/or other things that might be relevant.
Please join us on IRC: some people are on #badadroid (freenode).
NOTE: DEVELOPERS WANTED. Please contact us if you are a developer with something to contribute.
I do heavily encourage to work together on the better, common project instead of making kang releases and demanding money for somebody else's work.
Read as: If you think you can make something better than this by doing less and muchazo Ctrl+C Ctrl+V - you suck, go figure the rest.
INSTALLATION
FIRST INSTALLATION
Bada 2.0 is required
Warning! It will remove Bada!
Download BOOTFILES, Kernel and FOTA for your device:
for 8500:
BOOTFILES https://yadi.sk/d/KhxqKyg4bP2nu
"start" kernel https://yadi.sk/d/PhY11Rvnmq99T
FOTA https://yadi.sk/d/OtpVoaXpfNggE
for 8530
BOOTFILES https://yadi.sk/d/cBPD41VEbP2od
"start" kernel https://yadi.sk/d/xWwb8r3RmpZxK
FOTA https://yadi.sk/d/-WnbHbFHfNgZK
Flash BOOTFILES, "start" kernel and FOTA using Multiloader.
After reboot it will open android recovery
Advanced -> Terminal Command -> Select -> Type "sh partition.sh"
wait before on screen you will see "Partitions had been prepared"
if you have external SD card:
- Back -> Back -> Back -> Mount -> Mount USB storage
On PC you will see SD card mounted, and copy ROM there -> Unmount -> Back
- Install -> choose zip with ROM(mount point /external_sd) -> Swipe to Confirm Flash -> Reboot System
if you have no external SD card
- Back -> Back -> Back -> Reboot -> Recovery -> Swipe to Reboot
- Mount -> Enable MTP (if you see disable MTP - it is already activated) on this step PC can ask to install driver, use Android MTP driver
- Copy Zip with ROM Internal Storage -> Disable MTP -> Back
- Install -> choose zip with rom -> Swipe to install -> wait for flashing -> Reboot system
Enjoy OMNI!
You can remove installation .zip from Android level by connecting through USB in MTP mode.
TWRP Recovery mode is available using VolUp + End keys
Every next update you can just flash .zip through CWM.
UPDATE from OMNI older that 09.09.2014
- Make backup in TWRP(Backup -> Select Data -> Swipe to backup)
- Flash FOTA and "start" kernel via Multiloader
- Advanced -> Terminal Command -> Select -> Type "sh partition.sh"
- wait before on screen you will see "Partitions had been prepared" -> Back -> Back -> Back
- Mount -> Mount USB storage
- Copy zip with Rom from PC to External SD card -> Unmount -> Back
- Install -> choose zip with ROM -> Swipe to Confirm Flash -> Home
- Restore backup in TWRP (Restore -> Select packge for restore -> Swipe to restore)
- Reboot -> System
For activation Performance and Developer Options categories in Settings you need Settings->About Phone and tap 7 times on Build number
ROOT
Omni is without root support from default
To activate root flash zip via Recovery from XDA thread http://forum.xda-developers.com/showthread.php?t=1538053
GAPPS
GAPPS make our ROM slowler, because also slim GAPPS take about 15-20 MB RAM permanently
SLIM GAPPS: http://d-h.st/users/ZordanKV/?fld_id=28623#files
HOW TO UNINSTALL
Just reflash bada via Multiloader
CHANGELOG:
26.01.2016 https://yadi.sk/d/lY5ZEJc6noBVH
- Big kernel update from https://github.com/Coldwindofnowhere/android_kernel_samsung_aries/tree/android-5.1
Big thanks to @Coldwindofnowhere
It enable many additional settings in Settings-Performance
Also enabled boost for incall volume in Advanced Settings
- Added Battery saver mode from Omni Gerrit, Experimental- not really tested
- GPS fixes, still we have no A-GPS
11.01.2016 https://yadi.sk/d/pTSrLBykmpVVz
- Omni sources 11.01.2016
- Sensors update and cleanup
- Added Bigmem support in Advanced settings
with default settings we have 270 mb RAM with working 720p video recording
with Bigmem we have 283 mb RAM without working 720p video recording(as was by default in previous versions)
with Max RAM we have 315 mb RAM and camera, video playback and torch is not working at all
- Updated kernel with last omni changes
RIL update 20.12.2014 https://yadi.sk/d/kvYUiq6QdWSdD
- SMS fixes
just flash it via TWRP
11.12.2014 https://yadi.sk/d/80q05wvrdKW3t
- Omni sources 11.12.2014
- Added roaming indication
- Re-worked SMS
- Updated some Zram parameters
maybe something else
25.10.2014 https://yadi.sk/d/qCh-swftcJ7tg
- Omni sources 25.10.2014
- Moved to omni aries kernel
- Updated audio driver
- Updated charger driver
09.09.2014 https://yadi.sk/d/H5lEBmQvbLiSH
- Omni sources 09.09.2014
- New partition layout and new installation procedure(Read carefully! Device will be wiped).
Now you can use android without SD card
- Compass fixed
- Added phone reboot in case of modem crash.
15.08.2014 https://yadi.sk/d/jKCEMrAEZkZGr
- Omni sources 15.08.2014
- Hopefully fixed LCD wake-up bug on wave2, thanks to Blue59 for so many tests
- Corrected voltage for some on-board chips
13.07.2014 https://yadi.sk/d/DoaSRX3EWY9Hk
- Omni sources 13.07.2014
- Fixed updater script
- Fixed power off, thanks to Tigrouzen
11.07.2014
Updated FOTA links
Changed background from white to black
Added start of Bada - Call+End, we can use offline bada charger, in case if battery is fully empty
Added checking kernel size on SD card, sometimes boot.img exist but it is 0mb
04.07.2014 https://yadi.sk/d/Rw2UmkaoVxwdP - forgot to fix updater script, so please re-copy boot.img manually to SD card
- Omni sources 04.07.2014
- Small kernel optimizations
- Bring back Advanced Settings (TVout, vibration intensity and etc )
- Updated framework overlay
- Added OmniTorch
- Added USD OTG support (not tested), based on http://forum.xda-developers.com/showpost.php?p=53803247&postcount=8 Thanks to Tigrouzen
29.06.2014 https://yadi.sk/d/M0XEIgJMVTtCi
- Initial Release
THANKS TO
Special thanks to Rebellos for his CM10 ROM, for his good sources and many time, what he spent for my learning
Another Badadroid devs: Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen, Benzox and many others.
OMNI team for base ROM
Pawitp, kasper_h and all other aries developers
Paulk and Replicant project for good base for bada-modem RIL
and many other who help us.
Reserved
great work and really great rom thanks @volk204
i want install rom but no mount sd card on recovery wave 2
full flash bada but again no mount sd card
nima.yavari said:
i want install rom but no mount sd card on recovery wave 2
full flash bada but again no mount sd card
Click to expand...
Click to collapse
Mount point for SD card is /external_sd
Today Blue59 installed it successfully on Wave2
Also try to catch recovery.log via ADB http://rootzwiki.com/topic/24120-how-to-get-a-log-from-twrp/
volk204 said:
Mount point for SD card is /external_sd
Today Blue59 installed it successfully on Wave2
Also try to catch recovery.log via ADB http://rootzwiki.com/topic/24120-how-to-get-a-log-from-twrp/
Click to expand...
Click to collapse
change format sd card fat to fat32 correct
thanks blue59 and volk
Quick Review
USB OTG for badadroid kernel KitKat rom :
https://github.com/Tigrouzen/android_kernel_samsung_wave
This example based on ICZen(ICS) KitKat's very different :
vold.fstab :
Code:
dev_mount usbdisk /mnt/usbdisk auto /devices/platform/s3c_otghcd/usb
init.wave.rc :
Code:
mkdir /mnt/usbdisk 0000 system system
symlink /mnt/usbdisk /usbdisk
storage_list.xml (device/samsung/wave/overlay/frameworks/base/core/res/res/xml/) :
Code:
<storage android:mountPoint="/mnt/usbdisk"
android:storageDescription="@string/storage_usb"
android:primary="false"
android:removable="true"
android:allowMassStorage="true" />
Where is the link for FOTA ??
@Tigrouzen
Can i use Zendrokat FOTA and BOOT?
FOTA SD
couldn't find link for FOTA SD on other forums. can anyone supply?
Ok, it works with Zendrokat fota. But me and my friend (he flash your fota) cant install ROM. Because we have error next to formating. Updating partition details and Failed. How to repair it? ;/
thanks man ...
Hey "wavers" how 'bout the performance ?
I am able to install zendrokat v2.2 but this one is so hard.. Always some error please guys a clear demo or a video on flashing will be very helpful. I really love to try this rom as its very slim.Thanks. B.R:good:
msprakashmmc said:
I am able to install zendrokat v2.2 but this one is so hard.. Always some error please guys a clear demo or a video on flashing will be very helpful. I really love to try this rom as its very slim.Thanks. B.R:good:
Click to expand...
Click to collapse
As explained in OP,
-Flash bada 2.0
-Flash BF and Fota (SD fota)
-Put all files on SDcard
-Boot recovery, choose flash zip, go to /external-sd and choose the zip.
-this part is important : "- Wipe -> Advanced wipe -> Check "data" -> Repair or change File Sytem -> Change File System -> Ext4 -> Swipe to change ->Back -> Back ->Back -> Back "
-reboot, enjoy.
if you do this carefully step by step, it will work
BenzoX said:
As explained in OP,
-Flash bada 2.0
-Flash BF and Fota (SD fota)
-Put all files on SDcard
-Boot recovery, choose flash zip, go to /external-sd and choose the zip.
-this part is important : "- Wipe -> Advanced wipe -> Check "data" -> Repair or change File Sytem -> Change File System -> Ext4 -> Swipe to change ->Back -> Back ->Back -> Back "
-reboot, enjoy.
if you do this carefully step by step, it will work
Click to expand...
Click to collapse
where's the FOTA SD
Help help help
I have copied kernel and zip
Run recovery
Wipe all complete no error
Try to install zip
Updating partition details
Failed.
What i make wrong?
//
@BenzoX
Thank you. you are the best. Big thanks Bro for help!
my phone has gone in to boot loop. It starts with samsung 8500 then switches off then again starts and switches off and so on. If i try to go to download moad then it goes but again restarts. I cannot hold on a screen so cant even reflash bada...
If i try to go to download moad then it goes but again restarts.
Click to expand...
Click to collapse
If DL Mode not stable... then 2 reasons possible.
With luck only Battery empty.
So charge battery external... or use other battery...
If no luck...
Then Bootloader could be damaged or something else bad...
Best Regards
nileshlog said:
my phone has gone in to boot loop. It starts with samsung 8500 then switches off then again starts and switches off and so on. If i try to go to download moad then it goes but again restarts. I cannot hold on a screen so cant even reflash bada...
Click to expand...
Click to collapse
Battery probably empty, either boot any recovery and let it charge for a while, or plug phone and let charge on bada charge mode, or do it with some wires and a 5v power supply...
Then you should be able to go on DL mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YOU MUST BE ON THE HAIRYBEAN 2.31 JB 4.2.1 BOOTLOADER VERSION 10.6.1.27.1 AND TWRP 2.6.3.1+ OR CWM 6.0.4.6+ BEFORE FLASHING THIS ROM. SEE UPGRADE INSTRUCTIONS BELOW IF YOU ARE UNSURE
You must do a full wipe in recovery if coming from another ROM base. Do not do a full wipe from the bootloader. Don't forget to do a Nandroid Backup first and give the ROM 10 mins to stabilise!
Features and Tweaks
This ROM is based from OMNI AOSP sources
Supports EXT4 and F2FS Data partitions
Full Aroma Installer for main rom including choice of 3 kernels and ROM2SD/DATA2sd/F2FS support
Remixed _thatv10 kernel with OMNI ramdisk - repacked by sbdags
Grimlock kernel with OMNI ramdisk and _that init - by hardslog
DPI Size: 213 (TF700 recommended small fonts), 240 (Stock fonts), 224 (Medium fonts) & 200 (Small fonts), 180 (Tiny fonts) & 160 (Specsavers fonts)
Launchers: Omni, Google Experience Launcher, Apex , Nova
Boot Animations: ZOMBi-X, Android-L, Nexus Phase Beam
Gapps (updated by me to Google latest apks and libs)
Misc Apps: ESFile Explorer, Adobe Flash, AdAway, Titanium Backup, Keyboard Manager
Asus Apps: Compiled by kansasboy001; Asus Battery Widget, Asus Calculator, Asus Calendar, Asus Clock, Asus Dayscene Live Wallpaper, Asus Dictionary, Asus Email, Asus Gallery, Asus Keyboard, Asus Photo Story, Asus Sound Recorder, Asus Tasks, My Frame, My Water I & II, Asus Supernote Pro, Weather & Time Widget, Asus Framework, Asus Settings, Asus Audio (V4A), Asus Contacts, Asus File Manager(Root Browser), Asus Camera, Asus Browser
Tweaks: File system and performance optimised, Init.d support!, Zip Align, Force GPU Rendering, Browser2RAM
Continued Best Support of any ROM!
Warning - experimental tweaks
[*]Option to enable / disable data journaling on /data during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Option to enable / disable fsync during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Tip 1: Go to Settings - About Tablet, Click build number 7 times
Now you will see Developer Settings & Performance menus
[*]Tip 2: In Dev Settings, enable advanced reboot & change window animation,
transition animation & animator scales down to 0.2x for extra snappiness
[*]Tip 3: FLOATING WINDOWS: Settings - Interface - more... - Omni Switch
Bug List
[*] Dock works as do most special keys - just no battery available in the system bar
Change Log
20141002 Beta 3 changes</#></b>
- Added thatv11 to installer
- Added Grimlockv4 to installer
- Fixed BT not turning on without rebooot
- Fixed Bluethooth Share crash on first boot
- Fixed Dock battery reporting (needs an app/widget to work)
- updated dolphin browser to version 11.2.3
- updated google tts to 3.2.12
- updated google music to version 5.6.1523p
- updated google mail to version 4.9
- updated google search to version 3.6.14.1337016
- updated google talkback to version 3.5.2
- updated google play store to version 4.9.13
- updated google core services to version 5.0.89
- updated youtube to version 5.10.1.5
- updated apex launcher to version 2.6.0
- updated adaway to version 2.9.1
20140829 Beta 2 changes
- Fixed issues with Root being lost - reverted to cm11 ramdisks rather than omni as this was causing the issue
- SuperUser and SU Binary updated to version 2.0.2
- Dynamic fsync properly enabled on Grimlock kernel when fsync disabled selected in installer
20140826 Beta 1 changes
- New Base - Rebuilt from latest source which has updated bluetooth config - thanks lj50036
- 90% of dock should be working - battery display is not
- Added CM11 Kernel as option in installer - runs well
- Themed framework with a splash of RED
- Final Tweaks to Aroma Theme
- Updated GravityBox to version 3.3.3
- Removed DropBox as bloatware (30MB!) - still available on the Play Store
- Removed Google Plus as bloatware (33MB!) - still available on the Play Store
- Small changed to aroma themes to fix dark text on dark backgrounds
- Changed the transition config in aroma to see if it fixes screen freezes
- Fixed installer script to allow rom2sd on grimlock kernel install
- Fixed aroma freezes - or reduced them
- Re-themed Zombi-X aroma theme
- Updated performance switch for CPU to allow OC to 1800 on _that's kernel
- Fixed correct rom version in the build.prop
- Updated SU Binary to latest version
- Updated Chrome, Gmail, Google Now, YouTube
- Added Android Terminal to ROM
- New Red Aroma Theme for Zombi-X - requires less memory
- Initial release - omni cromified after source build
- Added SuperUSer and su binary for root capability
- Browser tweaked for speed and touch smoothness
- Added all the CROMBi/CROMi goodness to the base rom
- Aroma tuned for ZOMBi-X
Click to expand...
Click to collapse
The Team
@sbdags - Creative Mastermind (From CROMi-X/CROMBi-kk ROMS)
@lj50036 - Source Guy (From CROMBi-kk ROMS)
@hardslog - The Canadian (From Grimlock ROMS)
Credits
Google, wow is all I can say!
Omni Team - Thanks!
@_that For all the great advice, watching over us and fixing everything we break!!!!!
All the beta testers for your patience and feedback : BxMxK, canito10, duckredbeard, mikew29, nameneeded, cgf, cyberknight2001, Mikey1969, Ozark_8125, tiernan22, boldnuts, tonyh51, Vathan, erisi, Thibor69
To Do
[*]Fix Buetooth and other little bugs
XDA:DevDB Information
ZOMBI-X, ROM for the Asus Eee Pad Transformer Prime
Contributors
lj50036, sbdags, hardslog, _that
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.1.x
ROM Firmware Required: bootloader ending in 27.1
Based On: OMNI AOSP
Version Information
Status: Beta
Current Beta Version: 20140827
Beta Release Date: 2014-08-27
Created 2014-10-27
Last Updated 2014-10-27
How to Upgrade and Downloads
UPGRADE INSTRUCTIONS
REFER TO POST #5 FOR UPGRADE INSTRUCTIONS
FLASHING THE ROM FROM RECOVERY
Steps
1. Download the ROM below and save to your internal or external SD Card. Do not unzip the file.
ZOMBi-X ROM DOWNLOAD
Note: The first boot after install will take 10 mins whilst everything is built. Some people might think it is looping but it is not
ZOMBi-X Beta 3 Full Mirror 1
ZOMBi-X Beta 3 Full Mirror 2
ZOMBi-X Beta 3 Full Mirror 3
BOTH FILES ARE SIGNED. IF YOU ENABLE SIGNATURE VERIFICATION IN RECOVERY IT WILL VALIDATE THE FILE BEFORE FLASHING.
ASUS APPS DOWNLOAD - Flash from Recovery : Compiled by kansasboy001
Don't forget ROM2SD1.zip / DATA2SD1.zip first if you are not running an internal setup
Asus Battery Widget, Asus Calculator, Asus Calendar, Asus Clock, Asus Dayscene Live Wallpaper, Asus Dictionary, Asus Email, Asus Gallery, Asus Keyboard, Asus Photo Story, Asus Sound Recorder, Asus Tasks, My Frame, My Water I & II, Asus Supernote Pro, Weather & Time Widget, Asus Framework, Asus Settings, Asus Audio (V4A), Asus Contacts, Asus File Manager(Root Browser), Asus Camera, Asus Browser
[THREAD][APPS] [ASUS Apps][ CROMBi-kk & ZOMBi-kk]
ROM2SD/DATA2SD USERS PLEASE READ!
ROM2SD only works if you have ZOMBi-X, CROMBi-kk, CROMi-X or miniC flashed on internal with a THATv10+ kernel. Just choose ROM2SD in the installer of ZOMBi-X to flash it to ROM2SD and the installer will do the rest.
- Install ZOMBi-X and choose ROM2SD or DATA2SD install
The ROM2SD1.zip below is only needed if you need to switch your recovery to between normal and rom2sd mode. For Example you want to backup or restore a rom2sd installation. Flash once to go rom2sd and flash again to go back to normal. A reboot always puts you back to normal. Thanks to _that!
ROM2SD1.zip Download Mirror 1
ROM2SD1.zip Download Mirror 2
MD5 Sum: 7b699136d59ea3d5538570ccaf422acf
The DATA2SD1.zip below is only needed if you need to switch your recovery to between normal and data2sd mode. For Example you want to backup or restore a data2sd installation. Flash once to go data2sd and flash again to go back to normal. A reboot always puts you back to normal.
DATA2SD1.zip Download Mirror 1
DATA2SD1.zip Download Mirror 2
MD5 Sum: 9d5e9e2fd32593f981624499b37924b2
2. Boot to recovery – Either choose Boot to Recovery from the Power Menu if available on your current ROM or from the tablet power off hold the [volume down] button and press the [power] button. Once your see the flashing RCK icon, press [volume up] to select. If another icon is flashing use [volume down] to move between icons.
3. Using your recovery make a Nandroid Backup of your current setup
4. Select install and navigate to where you saved your ROM zip file.
5. Choose the ZOMBi-X zip file and follow the on screen prompts to customize your installation.
6. Reboot and enjoy.
Using GParted to setup a micro SD for ROM2SD or DATA2SD support
First and foremost - DO NOT USE MINI TOOL!
Formatting a micro sd card for ROM2SD
Note for DATA2SD just do one partition in stead of 2
We will be using a GParted Live boot USB and a FAST good quality micro sd like a Sandisk or Samsung Class 10 - SDHC/SDXC UHS-1 card with read speed of at least 20MB/S. If you have a cheap chinese eBay card don't bother - they are not good enough.
You will also need a USB Stick with at least 1GB size. Note this process formats the USB disk so don't keep any important files on it. It will also wipe your micro sd so make sure you are prepared.
1. Go to the link below and download the GParted Live CD/USB/HD/PXE Bootable Image and save it somewhere you remember
http://gparted.sourceforge.net/download.php
2. Download Linux Live USB Creator and install it
http://www.linuxliveusb.com/
3. Fire up LiLi USB Creator:
a. Choose your USB key - I,e, the drive letter for your USB (not sd card)
b. Choose your GParted iso image for the source
c. Choose the check box to Format Key in FAT32 and hide files
d. Click the lightning bolt to create
4. Now you have a bootable disk you need to boot from it. You may need to alter you BIOS Settings on your PC to boot from a USB Stick but mine did it without messing.
5. Insert your micro SD card into an SD Card adapter and insert into PC
6. Boot into GParted
7. Choose Gparted Live <Enter>
8. Don’t touch keymap <Enter>
9. Languge <Enter>
10. Start Gparted Automatically
11. Change device to your micro sd )it will default to you hard disk - hda– mine is /dev/sdc
12. Delete all existing partitions
For a 64GB card: (resize as needed but /system doesn't need to be bigger than 1GB)
13. Create new, always select primary: do this 3 times.
14. FAT 32 : Size 16GB – this will be /dev/sdc1 in gparted and will be your sdcard for storage in Android
15. EXT4 : Size 42GB – this will be /dev/sdc2 in gparted and will be your /data partition in Android
16. EXT4 : Size 1GB – this will be /dev/sdc3 in gparted and will be your /system partition in Android (not needed for data2sd)
Apply, wait until it finishes and then reboot. Remember to remove the usb stick
*Images stolen from elsewhere as I couldn’t get it to save mine
Now you are ready to install ROM2SD. Note if you want to use DATA2SD then only do 2 partitions 1x FAT32 and 1x larger EXT4
Then reinstall ZOMBi-X but this time choose the ROM2SD / DATA2SD option
Reserved
@spudsmac
@miduku
@robbie888
@lightiv
@Bigred007
@Waldo_
@emfanitek
@rlanza1054
@Unidave199
@Lock-N-Load
@Fear Knot
@lvrijn
@mitsublw
@scouzers
@zdebel
@jhr5474
@Eddie Hicks
@smchadwell
@dladz
@eRPeeX
@LocusofZen
Thx everyone that has donated, if you do not see your user name here and have donated, shoot me an PM and I will add you....
Thx Josh
TWRP
UNOFFICIAL TWRP [email protected]_V1.0
Contributors:
The Crombi Team ....
Credits:
TEAMWIN - Thx guys for all the help ...
_that - All the many hours and late nights....
Sources:
Device tree:
omni_android_device_asus_transformer-common
omni_android_device_asus_tf300t
Kernel:
grimlock_kernel_asus_tegra3_unified
CHANGELOG
- Made it possible to mount all 3 partitions on the external_sdcard from within TWRP ....
- Added 'reboot recovery' & 'reboot bootloader' as options in REBOOT
- These partitions will show up as ......
external_sdcard = User storage space, should be formatted vfat
external_data = Will become /data for ROM2SD or DATA2SD, can be formatted either EXT4 or f2fs both can now be done from within TWRP ...
external_system = Will become /system for ROM2SD, should be formatted EXT4 can also be done from with in TWRP ....
This should make it very nice to make backups and restore without the need for the rom2sd1.zip or the data2sd.zip ......
Click to expand...
Click to collapse
BLOB DOWNLOAD MIRRORS
UNOFFICIAL TWRP MIRROR 1
- md5 d4effaf97a51674bac04c6ccbf4fd892
UPGRADE INSTRUCTIONS, STEP BY STEP
This may help
Starting from a stock bootloader V 10.4.2.18
What you will need
Woking fastboot & adb / SDcard optional
TWRP for a 201 = twrp_tf201t.blob
@ne0zone75 TWRP for the 300 = ne0zone75_tf300t.blob
HairyBean BL & TWRP: This is effectively turn your 201 into a 300 <---- which is a flashable zip inside the zip that you downloasd
All 3 of the above file are in a zip in the Download section @ the top of every page of the thread ...... THIS ZIP IS NOT FLASHABLE...Your must unzip it to get to the real files !!! The name of this zip is 'upgrade_tf201_to_tf300t.zip'
CROMBI 201 ROM zip
A fully charged tablet
All the above files in the same directory as your fastboot.exe (if using windows) In your home folder on linux....
The process
Lets start with the TWRP recovery for the 201, let flash it with fastboot...
Power your tablet off and with the [ VOL DOWN & POWER ] buttons boot the tablet into the bootloader
Once there [ VOL DOWN ] untill the green box is on the USB ICON then [ VOL UP ] to select fastboot
Let make sure your PC can see your tablet with this command.
Code:
fastboot devices
Code:
fastboot -i 0x0b05 flash recovery twrp_tf201t.blob
Then
Code:
fastboot -i 0x0b05 reboot-bootloader
[ VOL UP ] ON RCK to enter recovery
Once in TWRP check to see if adb is working...
Code:
adb devices
Ok now that we know that is working let go ahead and push the HairyBean BL onto the tablet
Code:
adb push HairyBean_Bootloader_TWRP2.5.zip /sdcard
Now under the install tab in TWRP fine the folder and flash it....
reboot once it has fishined..If ask to install SuperUser say NO..........
LET THE BLUE BAR FILL !!!!!!!!! Once it has finished it will reboot into Hairybean TWRP....
Once booted into recovery, run this command to boot into fastboot
Code:
adb reboot-bootloader
You will see that the USB icon is missing now, this is good... If you still see the USB icon DON'T go to the next step
Now lets flash @ne0zone75 TWRP recovery
Code:
fastboot -i 0x0b05 flash recovery ne0zone75_tf300t.blob
Once that has finished let reboot into bootloader
Code:
fastboot -i 0x0b05 reboot-bootloader
Now enter recovery....
Make sure its verison 2.7.1.0
Go to Wipe////Format Data////Type yes
This can take up to 90 mins to format
DO NOT INTERRUPT THE FORMAT !!!!!!!
Now lets push CROMBI-KK onto your tab
Code:
adb push cm-11.0-2014xxxx-crombi-kk-tf201t.zip /sdcard
Find it under the install tab and flash it..
REBOOT into android, first boot can take up to 15 minutes
Kernel Sources
All Kernels included in this ROM package are unofficial, as they are complied from source, thay may not match the source that they were forked from. I will be linking the kernel source code as per the GNU GPL License.
Unofficial @hardslog Grimlock Kernel Source CLICK ME@-V1.0.0
Unofficial CM-11.0 Kernel Source CLICK ME@-V1.0.0
Unofficial @_that Kernel Source CLICK ME @-V1.0.0
Official @hardslog Grimlock Kernel Source CLICK ME
Official CM-11.0 Kernel Source CLICK ME
Official @_that's Kernel Source CLICK ME @-V11
Snagged like a Snagglepuss!
So much love for the Prime users
Hi Guys,
Thanks for providing the Omni experience for our tablets:good:
I have the Crombi-x on board now, but will flash soon.
As for TWRP, I'm running Neozone's one (also 2.8), do You recommend switching to the recovery used by Your Team?
I've seen the thread in TF300 forum and my opinion is: it's not a beta, rather stable from what I've read...
GibonXL said:
Hi Guys,
Thanks for providing the Omni experience for our tablets:good:
I have the Crombi-x on board now, but will flash soon.
As for TWRP, I'm running Neozone's one (also 2.8), do You recommend switching to the recovery used by Your Team?
I've seen the thread in TF300 forum and my opinion is: it's not a beta, rather stable from what I've read...
Click to expand...
Click to collapse
They are both very good recoveries, really its an end-user choose here, I do like my TWRP as you can do some nice things with the EXT-SDcard....
Thx Josh
Wowwwww... Long time without playing with my prime! Have been with haribean for a while!!!
Is the rom stable?
Which kernel do you recommend for the best battery saving a stable experience!
Thanks
Regards!
been running this for 24 hrs now on my prime, using the f2fs file system and _thats11 kernel, running very well, thanks Josh
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
sauliiin said:
Wowwwww... Long time without playing with my prime! Have been with haribean for a while!!!
Is the rom stable?
Which kernel do you recommend for the best battery saving a stable experience!
Thanks
Regards!
Click to expand...
Click to collapse
I dont know about stable, we are still in BETA testing. There is no reason i can see why it could not be ran as a daily driver .....
The betas are going to be coming a bit faster then RC or R releases which sometimes people dont like.. ...
I prefer grimlocks kernel for the best out of your 201 ......
Thx Josh
boldnuts said:
been running this for 24 hrs now on my prime, using the f2fs file system and _thats11 kernel, running very well, thanks Josh
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Click to expand...
Click to collapse
Great to see you up and running, let use know if there is anything we can do along the way ..... :laugh:
Thx Josh
B5 !!!!
UPLOADING B5 NOW ....
20141030 Beta 5 changes
- Merged tinted status bar into ZOMBi
- Tweeked muti-window [issues with tinted window]
- Added SU as a prebuit [updateable from the playstore]
Click to expand...
Click to collapse
Better than CM
Hi, flashed B4 today and want to provide some feedback:
- had a system FC after rom instalation, when the setup wizzard started, but continued without problems
- my Prime worked best with Slim ports, but Omni base sets the stanards even higher
- running Grimlock kernel.
So far, so good, missing the dock battery indicator, but can live with widgets.
Right now I'm streaming radio and plugged external spekers, having some good time here:good:
My old Prime is loaded with upstream kernel and Omni goodies
As for B5, do You recommend a clear or dirty flash?
lj50036 said:
UPLOADING B5 NOW ....
20141030 Beta 5 changes
Click to expand...
Click to collapse
Thanks for not let ours Prime todie! Any chance to include a Axis Reverse Fix? Just asking...:good:
Beta5 goes pretty stable on my Prime :good:
I was curious of the lags in menu and slow showing floating Omniswitch. Pretty strange, as I,m on F2FS and using Grimlock kernel (good experience with this one on Slim ports).
Does it happen to anyone else? Well, there's a fix.
I highly recommend switching the minimum CPU frequency to 370 in preformance.
Beta4 was running smoother and faster, but above trick does the job.
The tinted feature is just awesome
Another pro is well working dock keyboard.
Okies, now for the browsers testing
How do you get F2FS on the Transformer Prime TF201? Or is that function something for the other devices that was carried over? I dont see any recoveries here supporting it...
raylgo said:
How do you get F2FS on the Transformer Prime TF201? Or is that function something for the other devices that was carried over? I dont see any recoveries here supporting it...
Click to expand...
Click to collapse
The official TWRP 2.8.1.0 supports it ... http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.8.1.0-tf300t.blob
You do have to be in the HariyBean bootloader but I would guess you are .....
Thx Josh
Call me stupid, but where is 'upgrade_tf201_to_tf300t.zip'?
I have little experience with custom roms, only installed CM11 on my phone recently and decided to try putting something else on my tablet.
****
Edit: Don't worry, found it in the CROMBi-kk-R1 thread.
******
Edit again: trying to flash the recovery and it gives me "failed (remote: (invalidstate))". I can't even get into recovery, just get the alien with a red ! and it eventually reboots into android.
Any ideas?
*************
Triple edit: I forgot to unlock the bootloader downloaded the apk, just didn't run it.
Information and thanks:
A-6.0.1 ROM
Anroid: 6.0.1
Bulid: OmniROM
Big thank to:
fire855 for device,kernel,vendor
dracov76 for A-6.0.1 ROM (Samsung S1)
Change-log A-OPTIMALIZATION:
- Add bigmem (max 427mb) - Now it in OmniROM by Sooti
- Add mms apk
- Slimmed 169 mb
- Disable Security
- New Better look and Slimmer Apk Music
- less font file (its better for system)
- Add tweaks for battery life and performance
- Add Script "Seeder"
- Disable autologin Browser
- Optimalize bulid.prop
- new better stock clock
- delete apps
- Change DPI (216)
- remove auto update omni
- Less RAM usage
- Disable logcat
- 16bit transp.
- Disable Logers
- Enabled purgeable
- Optimization start system
- Disable JIT
- improved stability
- Add Killed media server
-Fix sources settings
-Optimization system/bin
-Disable Android Device Check In.
-Disable Extended JNI Checks
- New gallery
- Smooth Keyboard
- Tweak for performance
- Optimization ART (faster application loading)
- Corrected Dalvik
- Add camera aosp
- Patch Bigmem, now You can watch Youtube with MAX RAM (426mb)
- Fix lags, when watch video
- Change video quality
- improved sqlite
- improved OOM_ADJ Settings
- improved net buffer
- Smooth FOREGROUND apps
- Optimization DeviceSettings (Faster Loading)
- Disable debugging notify icon on statusbar (Offloads CPU)
- Performance boost in deodexed (Stop verify bytecode in system & data apps)
- Scroll (should will better)
- Watch Video should will better too (Add bulid.prop code video.accelerate.hw=1)
- Fast reboot
Installation
Bada 2.0 is required
Warning! It will remove Bada!
Download BOOTFILES, Kernel and FOTA for your device:
for 8500:
BOOTFILES: https://yadi.sk/d/KhxqKyg4bP2nu
"start" kernel: https://drive.google.com/file/d/0B-2dpW_lpZCPNWtxVnRVdUVTcVE/view
FOTA: https://yadi.sk/d/OtpVoaXpfNggE
for 8530
BOOTFILES: https://yadi.sk/d/cBPD41VEbP2od
"start" kernel: https://drive.google.com/file/d/0B-2dpW_lpZCPT0VCS0tINHU5cnc/view
FOTA: https://yadi.sk/d/-WnbHbFHfNgZK
Flash BOOTFILES, "start" kernel and FOTA using Multiloader.
After reboot it will open android recovery
Advanced -> Terminal Command -> Select -> Type "sh partition.sh"
Wait before on screen you will see "Partitions had been prepared"
Back -> Back -> Back -> Reboot -> Recovery -> Swipe to Reboot
Mount -> Enable MTP (if you see disable MTP - it is already activated) on this step PC can ask to install driver, use Android MTP driver
Copy Zip with ROM to Internal Storage or Sdcard -> Disable MTP -> Back
Install -> choose zip with ROM(mount point /sdcard for Internal storage and /external_sd for SD card) -> Swipe to Confirm Flash
Wait for flashing (about 10 min) -> Reboot System
First start take about 10-15 min, be patient.
Questions / Help
You must format /data for f2fs
For better look:
Settings>Pergormance>Advanced>(force high-end graphis)
How to faster:
Clean:
Once every 2 days Clean Cache (Settings>Storage & USB)
More ram:
GO SETTINGS>Advanced>Bigmem>Change to Bigmem/Max Ram
Background process limit:
-About phone, and 10 click in "Bulid number"
-Now go to settings>Developer options
- Background process limit
- Change "At most, 3 processes"
Browser faster:
Go to Browser>Settings>Advanced (here disable JavaScript)
Turn OFF Autoupdate APPS:
Go to Google Play>Settgings
Overclock:
Go to Settings>Performance>Change for 1400
I port complete A-6.0.1 ROM for Samsung Wave from Samsung S I9000
link rom update: https://drive.google.com/file/d/0B-TpiHEnTdWrb2tOY2VrQks5X0U/view?usp=sharing
XDA:DevDB Information
[ROM][6.0.1][Wave] A-6.0.1 rom, ROM for the Samsung Bada OS
Contributors
thinhx2
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.1.x
ROM Firmware Required: A-6.0.1 rom
Version Information
Status: Alpha
Created 2016-01-24
Last Updated 2016-02-07
i will be testing this one
thx for your work
To test makes no sense. All 4 versions of the firmware does not work SD card and camcorder.
bigmem pathc not wroking only 280 mb ram
no cam
in all of your versions
Because 4 rom from ss s1 no have camera and i no have free time add camera. Sorry bro
Ooo my rom, Great Job
thank bro
how about the bigmem patch is the ram reach 460mb or what !!??
because i had only 280mb ram availble
Kernel wave no support. Big ram for s1 bro
Hi @thinhx2
thank you for good roms
Full anvance and A-rom was updated please updat the roms dear!
what do you think about , Full anvance vs A-rom , which is better ?
alispeedsport said:
Hi @thinhx2
thank you for good roms
Full anvance and A-rom was updated please updat the roms dear!
what do you think about , Full anvance vs A-rom , which is better ?
Click to expand...
Click to collapse
now i very busy. Tet holliday in Viet Nam start next week.Very busy. Sorry i bad english. I will update 3 rom after 3 week.
But i thing sdcard not work and 3 rom will work very smooth,stable
update
link:https://drive.google.com/file/d/0B-TpiHEnTdWrb2tOY2VrQks5X0U/view?usp=sharing
playstore is missing....any link?
Bro can search on googlepengapps. But ss wave have less ram. I thing no need gapp
gapps???
jsinghjassi said:
gapps???
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
Full optimized
dracov76 said:
http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
Full optimized
Click to expand...
Click to collapse
Thax for reply.......
Plz help my one more, after install 6.0.1 on samsung wave 2, my phone is working tooooo slow, sometimes its look like a hanged.
i am so much tired. plz help me to come out of this.
Thax again...
jsinghjassi said:
Thax for reply.......
Plz help my one more, after install 6.0.1 on samsung wave 2, my phone is working tooooo slow, sometimes its look like a hanged.
i am so much tired. plz help me to come out of this.
Thax again...
Click to expand...
Click to collapse
i test on samsung wave 1(sold) run very good. sorry i no use samsung wave 2, i dont test
thinhx2 said:
i test on samsung wave 1(sold) run very good. sorry i no use samsung wave 2, i dont test
Click to expand...
Click to collapse
would u plz suggest me any 6.0 rom, which is good for wave 2