Hello,
I have soft-bricked my Alcatel Fierce XL, it is stuck in a bootloop, Windows does detect it in download mode but it does not install the drivers.
I have already tried installing the Qualcomm drivers.
Fastboot does not work and ADB works for a few seconds while in the bootloop but then it does not work anymore once the phone reboots itself.
Any sugestions?
Related
Ayow nigga .
The problem started when my system updates, after I click upgrade I've experience some effin errors . Then my Gionee m3 started to malfunction .
Help me this effin loop is so irritated . I already tried to flash stock rom , SP Flash, and I also download mediatek and some usb drivers . I think my main problem is SP flash tool cant recognize my device it wont charge either . Help me do you have some solution ?
i have the same problem my gionee m3.... i dont know other method to usb debuging my phone because it is only showing of android system recovery 3e when i use adb devices it not recognize it only shown as 0123456789abcdef sideload... in my searching it will change if i usb debugging enable... also sptools work on usb debugging i think
I have the same problem. I have installed two different sp flash tools, installed ADB drivers. my PC detects my phone and charging but having the option to open my files. I tried SP flash tools but wont detect my phone and will just charge.
PLease help.
Hi all,
I have a similar problem of bootloop after installing cm13 and gapps, it keeps rebooting back to twrp recovery. pls help.
Hello,
During the past days I've been trying to flash my C7 with no success. When pressing power button, it turns on and displays the Alcatel logo but stays there, it does not load the OS.
I have tried to use SPtools to flash it, I have the mtk drivers installed in my PC. When I plug the switched-off phone to the computer it turns on and couple seconds after my PC detects it (I can see the preloader mtk loaded on the device manager); however, one second right after it is detected, it is disconnected as it keeps booting to show the logo and stay there. Obviously, if the phone is not detected I cannot use SPtools to flash it.
Any suggestion will be highly appreciated.
PS: I have also tried to connect to it with adb, and dump a ROM using sideload with no sucess, the PC recognizes it from the recovery but after copying the image nothing new happens on reboot.
So I have Doogee Valencia2 Y100 Plus for only two weeks, and after installing Chainfire3D my phone got stuck in a bootloop.. so I have no ADB update, no sdcard update and no cache update.. so I have been left with factory reset but it didn't work.. I also don't have CWM or TWRP recovery, but USB debugging for me is on.. I am sure I have all drivers for USB installed because before I messed up my phone I had to connect it to my pc, plus I have manually downloaded proper drivers.. I have tried with ADB shell but it won't detect my phone, otherwise I could already fix my problem.. Doogee Valencia2 Y100 Plus doesn't seem to have a firmware online, so I couldn't re-flash it. Help, help.. surely I will never download Chainfire3D ever again..
HELP
I have same problem it stuck on boot loop when i was trying to update phone
You need to flash rom.
http://www.needrom.com/download/doogee-aurora-y100/ | + if worket
I tried a recovery with TWRP, and the phone seems to be bricked now without any way of booting into download mode or recovery mode itself. It's like it has erased itself from my phone. Would that mean that it's hard bricked and unrecoverable?
The 4060a shows up in MOBILedit software, but I'm unable to authorize. I have tried other flashing softwares to complete the task, but none has recognized the phone on the usb port. I have all the necessary Qcom drivers installed, as well as, ADB drivers.
please give me a clue here
thanks in advance
-BASS4GOA
BASS4GOA said:
I tried a recovery with TWRP, and the phone seems to be bricked now without any way of booting into download mode or recovery mode itself. It's like it has erased itself from my phone. Would that mean that it's hard bricked and unrecoverable?
The 4060a shows up in MOBILedit software, but I'm unable to authorize. I have tried other flashing softwares to complete the task, but none has recognized the phone on the usb port. I have all the necessary Qcom drivers installed, as well as, ADB drivers.
please give me a clue here
thanks in advance
-BASS4GOA
Click to expand...
Click to collapse
Same here minus using mobiledit. I've been trying to boot recovery for 2 days
Hello, guys.
Recently, I've tried to root a Cubot Power 4G following a guide I found online. I probably should have been more catious about it, cause now the phone is stuck on a bootloop. I tried to install a custom recovery to try and fix this, but as there was no official twrp for Cubot, I once again downloaded something that was probably shady. Thus, now the phone is stuck on bootloop, won't access recovery mode, is now turned off because battery gave out, but if I try to connect it to the pc, it will start to bootloop again. I cannot access adb, or at the least I don't know a way to, since it keeps bootlooping and I have no way to access a recovery mode(since there's no one, or at the least, if there is, it's faulty). What can I do here?
@Giordyman
Re-flash phone's Stock ROM by means od MTK Flash Tool. You have to install the Mediatek VCOM drivers before on your Windows computer, if not done yet.
jwoegerbauer said:
@Giordyman
Re-flash phone's Stock ROM by means od MTK Flash Tool. You have to install the Mediatek VCOM drivers before on your Windows computer, if not done yet.
Click to expand...
Click to collapse
I did! Or so I think... The moment I connect it to the pc, it starts bootlooping and so the pc cannot actually connect there
Bootloop is a situation where you cannot get into the "normal" Android system. Take note that as soon Android logo is shown on phone's display Android kernel got successfully initialized, ADB & Fastboot are ready.