I flash rom my V30 i checked ChipErase in LGUP now my phone IMEI is 0 and empty Serial number (SN) ? I remember my IMEI and SN but i can write it. Please helpme write it to phone !
lehuyla said:
I flash rom my V30 i checked ChipErase in LGUP now my phone IMEI is 0 and empty Serial number (SN) ? I remember my IMEI and SN but i can write it. Please helpme write it to phone !
Click to expand...
Click to collapse
Why did you use Chip Erase? That's what Chip Erase does. It wipes out IMEI. In none on the Instructions for WTF or Frankenstein does it say to use Chip Erase on LGUP.
You'll have to Google how to do that. On XDA we can't talk about how to change IMEI.
ChazzMatt said:
Why did you use Chip Erase? That's what Chip Erase does. It wipes out IMEI. In none on the Instructions for WTF or Frankenstein does it say to use Chip Erase on LGUP.
You'll have to Google how to do that. On XDA we can't talk about how to change IMEI.
Click to expand...
Click to collapse
i already make chip erase 2 time but the IMEI
stay the same no problem
v300s
seloka180 said:
i already make chip erase 2 time but the IMEI
stay the same no problem
v300s
Click to expand...
Click to collapse
You're crazy or very lucky. Chip Erase WILL delete IMEI. That is what it does.
Straight from the manual:
https://9to5lg.com/lgup-1-15-manual-how-to-unbrick-restore-your-lg-devices-with-lgup/
3) ChipErase: Dangerous, This will erase IMEI/efs, Do not try this if you do not have a NV backup.
Click to expand...
Click to collapse
All I know is every one who reports they used chip erase in the Frankenstein thread wiped their IMEI. It's not part of ANY instructions in this forum, so any one who does it in on their own.
Here's the remainder of the explanation:
REFURBISH： You will lost all user data（KDZ or TOT）
2) UPGRADE: Keep data and update your phone（KDZ or TOT）
Select Upgrade to flash kdz firmware to unbrick/restore your phone back to stock.
3) ChipErase: Dangerous, This will erase IMEI/efs, Do not try this if you do not have a NV backup.
Chip Erase can also remove the Google FRP on many LG devices with Android 5.0, 6.0. (Such as LG H345, LG MS345)
4) PARTITION DL：flash the single Parition or selected paritions onto your phone.
This feature can solve “unkown model” issues. This feature can be used to bypass google frp by flashing specific tot firmware.
5) DUMP：Dump all paritions of your phone as backup.,
AT&T and Spring LG phone users who may need this feature to dump the firmware from a working phone as back up and use Patition DL to restore phones.
6) FOTA Upgrade: This can be used to flash OTA Update file that comes with dot up file extention.
Click to expand...
Click to collapse
try restore modem image via partition backup restore if you don't have one, try to pull from other V30 or other lg phone you have. Don't expect your phone will be normal as before, it's just some experiment that I suggest since you don't have any answer yet.
If you have a twrp EFS backup use that to restore. If not then you likely won't be able to restore it
https://forum.xda-developers.com/showpost.php?p=73489308&postcount=2 try this.
Make sure you still have the box for legit imei.
and instead of 815, replace with your phone model number e.g 930, 931, or 932...
immns said:
https://forum.xda-developers.com/showpost.php?p=73489308&postcount=2 try this.
Make sure you still have the box for legit imei.
and instead of 815, replace with your phone model number e.g 930, 931, or 932...
Click to expand...
Click to collapse
this is the program that I messed up my device with it (hard brick) after i restore edited efs partition .
it cost me about 30 $ to boot it with medusa box in repair shop.
So I became not afraid to break it so much that I did chiperase several times and did not even lose Imei.
seloka180 said:
this is the program that I messed up my device with it (hard brick) after i restore edited efs partition .
it cost me about 30 $ to boot it with medusa box in repair shop.
So I became not afraid to break it so much that I did chiperase several times and did not even lose Imei.
Click to expand...
Click to collapse
Please, no one else do that. You will lose IMEI. Only this one person says they have not lost IMEI using Chip Erase in LGUP, especially our Dev Patched LGUP.
ChazzMatt said:
Please, no one else do that. You will lose IMEI. Only this one person says they have not lost IMEI using Chip Erase in LGUP, especially our Dev Patched LGUP.
Click to expand...
Click to collapse
maybe because my device is repaired ?
I think I lost IMEI using one of the TWRP version switching to another LS998. My backup of the first was on a different TWRP version I didn't recognize the feature/version difference. So my old device backup of everything didn't have the same partitions as the new phone TWRP was capable. I wiped everything on the new device and restored everything SMH... Everything worked well except I went ahead and erased data because encryption. But later when I was checking for Gpay I realized my IMEI was 0. Lame. Obviously I still have the IMEI I even double checked it against the numbers captured by Android Find Device (not everyone knows that's there) but no way to restore it it seems.
Now I have a terrorist phone, as they call it, I guess. Anyway everything still works etc coming back from airplane mode takes a restart most times, and Gpay contactless payments cards stopped adding. FYI I guess for others. Still rocking my V30. Like my neighbor Chazmatt I might just buy another one lol one day and keep this one as the family backup. Otherwise I'm still using it full time.
2 day search Google, I repaired my phone imei but SN still emplty, i used Kingtool software. Every one can fix it if lose imei !
https://forum.xda-developers.com/showpost.php?p=73489308&postcount=2
Just for info: I have used the qualcomm nv tools from above (and set the port check test) and it worked for me!
Now I got my IMEI back!!! yipiieh
ChazzMatt said:
Please, no one else do that. You will lose IMEI. Only this one person says they have not lost IMEI using Chip Erase in LGUP, especially our Dev Patched LGUP.
Click to expand...
Click to collapse
lg g8 h870ds done the same and lost IMEI, any one can help?
vincentset said:
lg g8 h870ds done the same and lost IMEI, any one can help?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=73489308&postcount=2
HueyT said:
https://forum.xda-developers.com/showpost.php?p=73489308&postcount=2
Click to expand...
Click to collapse
hey it says your phone is not rooted, so what can I do?
vincentset said:
hey it says your phone is not rooted, so what can I do?
Click to expand...
Click to collapse
Can't fix anything without rooting phone first
I did exactly the same thing my fix came with looking in the hidden menu *#546368#*998#
stinka318 said:
I did exactly the same thing my fix came with looking in the hidden menu *#546368#*998#
Click to expand...
Click to collapse
Elaborate:laugh:
HueyT said:
Elaborate:laugh:
Click to expand...
Click to collapse
It depends on what model you have on the hidden menu *#546368#* then the number of your model then # go to sev menu look for mid in there you can put original imei number in if know or geniate a new one......
Related
why do you need to backup your IMEI / another method click here?
- Download & install
- ROOT requires
https://docs.google.com/file/d/0B3J7gOQH7ViEWUp0VUVGdE5ZRVE/edit?usp=sharing
Permission
Can you verify the authentic properties of this program? I'm wary of using programs that I am unsure about that require root... especially from a non-recognized developer.
No offense meant just curious.
Thanks
dajmanjt said:
Can you verify the authentic properties of this program? I'm wary of using programs that I am unsure about that require root... especially from a non-recognized developer.
No offense meant just curious.
Thanks
Click to expand...
Click to collapse
You can read permission
so this is just backin up the 2 efs partitions, modemst1 and modemst2? but in app form instead of my script?
the efs backup function has also been added to TWRP.
this could be useful until TWRP is working for the D802 international variant.
paratox said:
this could be useful until TWRP is working for the D802 international variant.
Click to expand...
Click to collapse
Here is a working TWRP for the D802 international variant. Link ::: http://forum.xda-developers.com/showthread.php?t=2469995 :good:
How can repair my imei? I found this app too late. TIA
Or does someone have a zeroed out backup? PLZ reply I need this badly.
Edit: My esn is all zero's after bricking/unbricking.
tegezee said:
Or does someone have a zeroed out backup? PLZ reply I need this badly.
Edit: My esn is all zero's after bricking/unbricking.
Click to expand...
Click to collapse
you should probably create a new thread and get help for this. Like the link in the OP said, efs folder are unique to each device because it also contain imei/esn number. Using someone else back up wont help you with your phone. maybe theres a different fix.
super114 said:
you should probably create a new thread and get help for this. Like the link in the OP said, efs folder are unique to each device because it also contain imei/esn number. Using someone else back up wont help you with your phone. maybe theres a different fix.
Click to expand...
Click to collapse
I will but, You can zero out the 3 efs img files to get zeroed out meid & esn locations. As seen in this thread!!! It's called EFS Backup/Restore/Repair...
I have a problem with lost IMEI ..... but i didn't do any back up IMEI ... can we fix it ?
reachheng said:
I have a problem with lost IMEI ..... but i didn't do any back up IMEI ... can we fix it ?
Click to expand...
Click to collapse
We could if we had something that would allow these files to be converted to a format that is readable by a hex editor, and then convert them back. I have been trying to find something like this for a while but I can't find anything. If anyone knows and would be willing to share, I am sure a great many of us would appreciate it!
Tks @hoangnova :good:
This is my last ditch effort. Small back story: I somehow wiped EVERYTHING on my G2. EFS partition, ESN, data, SIM info., everything with dialer codes. All of my network information reads "unknown". I tried many methods from here on the forums to get this data back and it turns out I have lost my EFS partition- DNA for the network? I sent it to LG to get it fixed, having done a hard reset and leaving no trace of root. They sent it back without even asking and did no repairs. The note said "board bent". WTF?? How does the user bend the main board, especially when I never opened it? They voided my warranty and ripped off my IMEI/MEID sticker from the back of the phone.
Anyways, I am here with a brick. No network still. Here is what I have done:
1) .tot method to ZVC. Several more times... once to ZV7 where I lost touch capability. Luckily saved my arse with a micro->usb cable and a mouse.
2) attempted to root with ioroot25. Failed because the phone WILL NOT find recovery mode. adb, voldown+pwr then again from power off, and apps are unable to force the phone into recovery mode. I assume it is possible that my recovery mode is deleted?
3) Would have tried all of these "rewrite your efs/imei/etc" things but I can't do any without root. Can't root without recovery, can I?
4) Spent the last two weeks scouring the internet for a fix and going back to my Epic 4G temporarily.
Please help me, has anyone seen this before? Can anyone help me fix it? I am to the point where I would pay to have it fixed. Any experts out there? XDA has yet to let me down... I just need to know if I can fix it or if it is a brick so I can go searching for an old Sprint GS3.
Thanks all,
baublitz
deleted
hoangnova said:
why do you need to backup your IMEI / another method click here?
- Download & install
- ROOT requires
https://docs.google.com/file/d/0B3J7gOQH7ViEWUp0VUVGdE5ZRVE/edit?usp=sharing
Permission
Click to expand...
Click to collapse
One question,
I can not really back up the IMEI and EFS by solid explorer or TWRP?
I'm a newbie!
For all lg devices? or only G2?
after flashing d800 with tot i lost the imei of the phone
how to repair it?
Ok i need help with my device.
I got a s6 edge SMG925I a while ago, yesterday an update (i guess its called OTA) popped up and i installed it. after the installation was completed but now i'm not registered on network, and i can't detect my SIM card.
Note: my IMEI is NOT blocked.
So far all my efforts were for nothing.
All the info i got so far by searching
Problems:
Not registered on network
when typing *#06# it only show S/N
About device it shows IMEI: Unknown
did not back up the efs folder (but i GUESS the folder is still there and somehow the new stock can't access it)
Android ver. 6.0.1(marshmallow)
Possible cause:
EFS Folder corrupted
Bad Stock installation
Already tried:
Rooting (i wasnt able to root)
Installing latest stock rom
installing the old rom
QPST to change IMEI
Please help me guys
EDIT:
I figured out what happened, my efs got deleted somehow, i got no backup, is there a way around this? help me please
brunao90 said:
Ok i need help with my device.
I got a s6 edge SMG925I a while ago, yesterday an update (i guess its called OTA) popped up and i installed it. after the installation was completed but now i'm not registered on network, and i can't detect my SIM card.
Note: my IMEI is NOT blocked.
So far all my efforts were for nothing.
All the info i got so far by searching
Problems:
Not registered on network
when typing *#06# it only show S/N
About device it shows IMEI: Unknown
did not back up the efs folder (but i GUESS the folder is still there and somehow the new stock can't access it)
Android ver. 6.0.1(marshmallow)
Possible cause:
EFS Folder corrupted
Bad Stock installation
Already tried:
Rooting (i wasnt able to root)
Installing latest stock rom
installing the old rom
QPST to change IMEI
Please help me guys
Click to expand...
Click to collapse
How about a simple reset from the settings menu? But I am pretty sure, if you somehow deleted the IMEI imformation, your chances are not the best. You'd have to find a way, to get write thatbinfo back. What you could do is ask someone else to backup that partition for you and change the values according to your phone ( IMEI, serial number,...) Then flash this partition info back. Good luck!
Sent from my SM-G925F using XDA Free mobile app
CM recovery
brunao90 said:
Ok i need help with my device.
I got a s6 edge SMG925I a while ago, yesterday an update (i guess its called OTA) popped up and i installed it. after the installation was completed but now i'm not registered on network, and i can't detect my SIM card.
Note: my IMEI is NOT blocked.
So far all my efforts were for nothing.
All the info i got so far by searching
Problems:
Not registered on network
when typing *#06# it only show S/N
About device it shows IMEI: Unknown
did not back up the efs folder (but i GUESS the folder is still there and somehow the new stock can't access it)
Android ver. 6.0.1(marshmallow)
Possible cause:
EFS Folder corrupted
Bad Stock installation
Already tried:
Rooting (i wasnt able to root)
Installing latest stock rom
installing the old rom
QPST to change IMEI
Please help me guys
Click to expand...
Click to collapse
i think you can install CM recovery (TWRP) then you can process the backup of your old rom from the recovery.
just enter in recovery mode then you'll find "restore" choose all the files ( i think there will be like this: System, Cashe, Efs, Boot...) then hit Restore botton, and wait for it to boot up hope this helps you bro
N00BY0815 said:
How about a simple reset from the settings menu? But I am pretty sure, if you somehow deleted the IMEI imformation, your chances are not the best. You'd have to find a way, to get write thatbinfo back. What you could do is ask someone else to backup that partition for you and change the values according to your phone ( IMEI, serial number,...) Then flash this partition info back. Good luck!
Sent from my SM-G925F using XDA Free mobile app
Click to expand...
Click to collapse
Ok, the reset didn't work, is there a way to write it back? it can be done?
g3nius85 said:
i think you can install CM recovery (TWRP) then you can process the backup of your old rom from the recovery.
just enter in recovery mode then you'll find "restore" choose all the files ( i think there will be like this: System, Cashe, Efs, Boot...) then hit Restore botton, and wait for it to boot up hope this helps you bro
Click to expand...
Click to collapse
Thank you, i'll try that now
edit: it didn't work, its kinda obvious the backup file was empty
try
brunao90 said:
Ok, the reset didn't work, is there a way to write it back? it can be done?
Thank you, i'll try that now
edit: it didn't work, its kinda obvious the backup file was empty
Click to expand...
Click to collapse
sorry to hear that try to install the 4 files rom with PIT file hope that will work
g3nius85 said:
sorry to hear that try to install the 4 files rom with PIT file hope that will work
Click to expand...
Click to collapse
Sorry for the noob question but how do i do that?
By the way, I managed to figured out what happened.
Long story short, my efs got deleted somehow and now its lost forever. What should i do?
brunao90 said:
Sorry for the noob question but how do i do that?
By the way, I managed to figured out what happened.
Long story short, my efs got deleted somehow and now its lost forever. What should i do?
Click to expand...
Click to collapse
You need someone to write a new cert in your phone and fix the imei.
FakeSmile said:
You need someone to write a new cert in your phone and fix the imei.
Click to expand...
Click to collapse
Ok but i don't know anyone who can do this, u got any advice?
brunao90 said:
Ok but i don't know anyone who can do this, u got any advice?
Click to expand...
Click to collapse
Try to get the efs partition holding the information from someone else, change it to your IMEI, serial,... And flash that partition to your phone and you should be good. I guess you'd have to use a hex editor to get that done. I am not rooted, so I can't back it up for you.
Sent from my SM-G925F using XDA Free mobile app
Hello dear fellow mido users. I am trying to solve a problem here and I would very much appreciate your help on this:
I am running latest MIUI Stable Global flashed from fastboot, I have IMEI, but I don't have mobile signal. WiFi & BT works fine.
How I got here:
Bricked the phone about half a year ago
Ressurected it a week ago via connecting the pins in the back and flashing via edl.
I have unlocked it officially, as I had it unlocked before.
I have flashed TWRP & latest official RR, but it bootlooped, because my /persist partition was freaked out, so I reflashed it from the extracted fastboot ROM and I booted.
However, both my IMEIs dissappeared, and I only had the first IMEI from the back of my phone. So I calculated the second IMEI per a tutorial (from a Czech site) and restored both IMEIs via the Qualcomm QPST xqcn file, verified both IMEIs are showing up on my phone and are valid as per online IMEI checkers.
However, the signal didn't work, so I reflashed another mido device's IMEI (I have my original IMEIs backed-up) and flashed latest MIUI fastboot ROM, still no signal.
And here I am, and I am asking you for help..
If anyone can help me or at least point me in the right direction I will be eternally grateful :angel:
Bump, offering $5 PayPal to anyone who helps me restore my mobile signal.
JouzaCZ said:
Bump, offering $5 PayPal to anyone who helps me restore my mobile signal.
Click to expand...
Click to collapse
"Ressurected it a week ago via connecting the pins in the back and flashing via edl." - are you sure you didn't accidently disconnect the antenna cable from the motherboard end or from the USB board end while doing the tespoint connection to get into EDL mode?
crok.bic said:
"Ressurected it a week ago via connecting the pins in the back and flashing via edl." - are you sure you didn't accidently disconnect the antenna cable from the motherboard end or from the USB board end while doing the tespoint connection to get into EDL mode?
Click to expand...
Click to collapse
Thank you so much for your reply. I just checked, the cable wasn't disconnected, but I dis-and-reconnected it just to make sure. Still no signal.
I should mention I reflashed my original IMEI and verified that its valid once again. I am attaching links to pictures of the back of my phone disassembled if anyone can spot something wrong: PHOTOS.
Still hoping for a solution.
JouzaCZ said:
Still hoping for a solution.
Click to expand...
Click to collapse
Okay, starts to be interesting. Did you play with the band selection? Probably the band has been changed to US?
Hope you have Magisk (root) - if not please flash Magisk.
I presume ADB is already installed.
Put the phone to airplane mode.
From a PC open a cmd and issue adb shell
or start a terminal emulator on your phone
Then issue these commands in the shell
su
pm clear com.android.providers.telephony
settings put global preferred_network_mode 10
settings put global preferred_network_mode1 10
settings put global preferred_network_mode2 10
Remove airplane mode.
Restart.
Check again.
If still not works:
Start phone in fastboot mode
Issue these commands from PC cmd:
fastboot devices << just to make sure you phone is recognised
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
It will restart.
Check again.
Anyway, if you issue *#*#INFO#*#* or better known as *#*#4636#*#* in the dialer then selecting Phone 1 or Phone 2 (according to the SIM slot you want to check) in the top right or lower left there is a band-select menu (not in MIUI but in other custom ROMs) so there you are able to select the correct band if you want (that would mean you flash any custom ROM from TWRP or any custom recovery for a couple of minutes, go to dialer and look around)
crok.bic said:
Ping
Click to expand...
Click to collapse
Tried everything you said in order, still doesn't work. In normal fastboot, fastboot erase modemst1 results in this image isn't allow download. So I used mfastboot and it worked, however still no signal. When I try to switch the band in the options menu, there are two options: Automatic and United States. When clicked, both result in: Set [United States/Automatic] Unsuccessful.
And I just noticed it erased my IMEI again... Maybe the IMEI wasn't really there the whole time?
What is the proper way to flash both IMEIs? (I know them both)
JouzaCZ said:
Maybe the IMEI wasn't really there the whole time?
What is the proper way to flash both IMEIs? (I know them both)
Click to expand...
Click to collapse
I have the impression that the IMEI wasn't even there..
Flashing it is not possible.
The partition called EFS - in TWRP - is the one storing these kind of IDs.
If you have a backup of EFS you are good to go.
I used to tell people that before doing anyhing (before even unlocking the bootloader)
just do QCN info backup so in case of IMEI / Wifi MAC / Bluetooth MAC issues it's easy to restore..
Your case is a bit more advanced since you have no backup - so you have only one way to get out from this situation:
re-generate the QCN info. I advise you to use >>this<< tutorial (files are attached to the post) to properly re-generate and push back the correct info.
And here's the ultimate guide as well: part 1 and part 2
crok.bic said:
I have the impression that the IMEI wasn't even there..
Flashing it is not possible.
The partition called EFS - in TWRP - is the one storing these kind of IDs.
If you have a backup of EFS you are good to go.
I used to tell people that before doing anyhing (before even unlocking the bootloader)
just do QCN info backup so in case of IMEI / Wifi MAC / Bluetooth MAC issues it's easy to restore..
Your case is a bit more advanced since you have no backup - so you have only one way to get out from this situation:
re-generate the QCN info. I advise you to use >>this<< tutorial (files are attached to the post) to properly re-generate and push back the correct info.
And here's the ultimate guide as well: part 1 and part 2
Click to expand...
Click to collapse
Okay, I have already followed the first tutorial you linked before, so I have the xQCN files ready. I will follow the second tutorial and report back. Thank you for taking the time to help me.
JouzaCZ said:
Okay, I have already followed the first tutorial you linked before, so I have the xQCN files ready. I will follow the second tutorial and report back. Thank you for taking the time to help me.
Click to expand...
Click to collapse
After that I advise you to use MiFlash and flash a recent fastboot ROM.
Report back when you finished. There should be a way..
crok.bic said:
After that I advise you to use MiFlash and flash a recent fastboot ROM.
Report back when you finished. There should be a way..
Click to expand...
Click to collapse
Okay, I followed the first tutorial and successfully restored both IMEIs, still not working. I noticed, while flashing the xQCN file, it gives me a message about the model number of the phone not matching the model number of the xqcn file. Is that normal?
Last resort is to follow the second tutorial and redo everything.
JouzaCZ said:
gives me a message about the model number of the phone not matching the model number of the xqcn file
Click to expand...
Click to collapse
Waitaminute.. What is the error message exactly? This is odd, I used that file many times without any glitch, issue or error message.
crok.bic said:
Waitaminute.. What is the error message exactly? This is odd, I used that file many times without any glitch, issue or error message.
Click to expand...
Click to collapse
"The model number in the QCN file and the phone do not match. Do you still want to restore the phone with this file?"
JouzaCZ said:
"The model number in the QCN file and the phone do not match. Do you still want to restore the phone with this file?"
Click to expand...
Click to collapse
In fastboot mode what is the answer of the phone to the command adb devices and fastboot getvar product? I don't care about the serial but all the rest.
crok.bic said:
In fastboot mode what is the answer of the phone to the command adb devices and fastboot getvar product? I don't care about the serial but all the rest.
Click to expand...
Click to collapse
fastboot getvar product: mido
adb devices: 7e03cac30903 device
JouzaCZ said:
fastboot getvar product: mido
Click to expand...
Click to collapse
Something is not quite straight here - the QCN file there is for Mido, that's 100% sure.
You started the thread with this statemenet: "Bricked the phone about half a year ago"
What did you do exactly? Once I had a phone - remotely resurrected - that has been flashed with a markw ROM (Redmi 4X) instead of Redmi Note 4X (mido) and the guy experienced something similar.
crok.bic said:
Something is not quite straight here - the QCN file there is for Mido, that's 100% sure.
You started the thread with this statemenet: "Bricked the phone about half a year ago"
What did you do exactly? Once I had a phone - remotely resurrected - that has been flashed with a markw ROM (Redmi 4X) instead of Redmi Note 4X (mido) and the guy experienced something similar.
Click to expand...
Click to collapse
Pasting from a thread I made back when I bricked the phone:
Here's the situation:
Was on stock MIUI Global 9.5.8.0 with RedWolf Recovery.
Did a backup and flashed LineageOS
Wasnt happy with it and flashed back the backup, including the Firmware and EFS partitions, basically every partition
Bootloop, WiFi and BT driver prolly messed up, cant connect and restarts upon trying to connect to WIFI/BT.
Tried flashing other firmware, various combinations of wipes, flashes, MiFlashTool fastboot rom, nothing helped.
Tried flashing with EDL, the newest ROM gives me "Too many lines in XML file", old ROM flashed fine, but then couldn't even get to fastboot.
Now: Can't get to fastboot nor recovery, phone goes to EDL mode w/ red LED blinking when connected to PC.
QFIL gives me "Cannot read packet header, read 0 bytes", same with MiFlash.
Click to expand...
Click to collapse
JouzaCZ said:
Was on stock MIUI Global 9.5.8.0 with RedWolf Recovery.
Did a backup and flashed LineageOS
Click to expand...
Click to collapse
Do you have this backup you made with RedWolf?
JouzaCZ said:
including the Firmware and EFS partitions, basically every partition
Click to expand...
Click to collapse
Not a good move. System is up and running, tho, right?
If you go to Settings - About phone - Baseband - what is the baseband version?
Does it looks like a decent version info or say "unknown"?
crok.bic said:
Do you have this backup you made with RedWolf?
Not a good move. System is up and running, tho, right?
If you go to Settings - About phone - Baseband - what is the baseband version?
Does it looks like a decent version info or say "unknown"?
Click to expand...
Click to collapse
Don't have the backup.
Sorry for confusing you, the Now section is from the old post, I haven't done anything since my last post.
JouzaCZ said:
Pasting from a thread I made back when I bricked the phone:
Click to expand...
Click to collapse
JouzaCZ said:
Don't have the backup.
Sorry for confusing you, the Now section is from the old post, I haven't done anything since my last post.
Click to expand...
Click to collapse
No worries - but still:
If you go to Settings - About phone - Baseband - what is the baseband version?
Does it looks like a decent version info or say "unknown"?
crok.bic said:
No worries - but still:
If you go to Settings - About phone - Baseband - what is the baseband version?
Does it looks like a decent version info or say "unknown"?
Click to expand...
Click to collapse
Decent version. Specifically: 953_GEN_PACK-1.148143.1.163979.1
Also can we switch to some IM like WhatsApp so we don't have to keep pinging each other via quotes? I will post the solution/result in the thread.
I managed to erase IMEI and backup as well. Evrything got complicated after flashing AT&T firmware with Medusa. That is first time SIM lock showed and stayed on ever since.
I can get V60 to work with 600N firmware but it does not work propperly as reciveng sms takes for ever.
Now there are many threads on restoring lost IMEI by editing qcn backup from other working phone and replacing IMEI with your own.
I did that and got confi3from original owner of proper qcn file that I have indeed replaces his IMEI with mine. Flashing edited qcn file with QFIL was repported as successful but IMEI is still 0.
There are som suggestion on rewriting FSG, Modemst1 and 2 with zeroes but dd command used for that purpose report that there is not enough space.
Any idea? All suggestions are welcome and wil be tested ny me.
Thank you.
Staljin
same issue.
lost imei. nothing i tried works
staljin said:
I managed to erase IMEI and backup as well. Evrything got complicated after flashing AT&T firmware with Medusa. That is first time SIM lock showed and stayed on ever since.
I can get V60 to work with 600N firmware but it does not work propperly as reciveng sms takes for ever.
Now there are many threads on restoring lost IMEI by editing qcn backup from other working phone and replacing IMEI with your own.
I did that and got confi3from original owner of proper qcn file that I have indeed replaces his IMEI with mine. Flashing edited qcn file with QFIL was repported as successful but IMEI is still 0.
There are som suggestion on rewriting FSG, Modemst1 and 2 with zeroes but dd command used for that purpose report that there is not enough space.
Any idea? All suggestions are welcome and wil be tested ny me.
Thank you.
Staljin
Click to expand...
Click to collapse
You can write imei with LgUp dev.1.6. My phone lost network Please can you get me QCN file
saved-j said:
same issue.
lost imei. nothing i tried works
Click to expand...
Click to collapse
Did you try we write imei with LGUp. I successed write imei but Radio off. I need QCN file
Trung9x said:
Did you try we write imei with LGUp. I successed write imei but Radio off. I need QCN file
Click to expand...
Click to collapse
When I try to write imei by lgup mobile stuck in blue screen.
Trung9x said:
Did you try we write imei with LGUp. I successed write imei but Radio off. I need QCN file
Click to expand...
Click to collapse
I try to use pdm In lgup to write imei in lg v60 but still 0
Trung9x said:
Did you try we write imei with LGUp. I successed write imei but Radio off. I need QCN file
Click to expand...
Click to collapse
How can I do that?
rifay78 said:
How can I do that?
Click to expand...
Click to collapse
No way to write imei , only backup qfil
Bahmale said:
No way to write imei , only backup qfil
Click to expand...
Click to collapse
I haven't qsn file
staljin said:
I managed to erase IMEI and backup as well. Evrything got complicated after flashing AT&T firmware with Medusa. That is first time SIM lock showed and stayed on ever since.
I can get V60 to work with 600N firmware but it does not work propperly as reciveng sms takes for ever.
Now there are many threads on restoring lost IMEI by editing qcn backup from other working phone and replacing IMEI with your own.
I did that and got confi3from original owner of proper qcn file that I have indeed replaces his IMEI with mine. Flashing edited qcn file with QFIL was repported as successful but IMEI is still 0.
There are som suggestion on rewriting FSG, Modemst1 and 2 with zeroes but dd command used for that purpose report that there is not enough space.
Any idea? All suggestions are welcome and wil be tested ny me.
Thank you.
Staljin
Click to expand...
Click to collapse
plz tell me how to erase imei lg v60
saad19945 said:
plz tell me how to erase imei lg v60
Click to expand...
Click to collapse
Do not exhaust yourself, all these methods will not help you in anything
Here's a full LUNS backup for the Sprint LG G8x with the last update that was pushed OTA.Enjoy!
LG V60 AT&T 30a - Google Drive
drive.google.com
Bro with this I can restore to functional a10 sprint? can this fix the problem of NTcode error?
mclarenf195 said:
Bro with this I can restore to functional a10 sprint? can this fix the problem of NTcode error?
Click to expand...
Click to collapse
Yes,and if I remember correctly that backup is A11.
thanks, I'm going to try, I imagine that it is restored with QFIL, I've tried a thousand things with several KDZ but I can't solve the ntcode error, network and fingerprint sensor error.
mclarenf195 said:
thanks, I'm going to try, I imagine that it is restored with QFIL, I've tried a thousand things with several KDZ but I can't solve the ntcode error, network and fingerprint sensor error.
Click to expand...
Click to collapse
That's stock Sprint.That will fix it all.Just copy the LUNS files in to the Qualcomm folder.
Surgemanxx said:
That's stock Sprint.That will fix it all.Just copy the LUNS files in to the Qualcomm folder.
Click to expand...
Click to collapse
Friend I have a question, should I restore the LUNS files with fh_loader how in the netmsm guide?
[Tutorial] Rescue From HARD BRICK
Don't worry! Everything's gonna be alright ;) You may accidentally erase all partitions and GPT on your phone. Nothing is shown in "Partition Manager". Since there's no Rawprogram XML file we need an alternative method to get the phone back on...
forum.xda-developers.com
I don't delete anything? I leave the partitions how are they? Thanks for the help.
Yes,restore them with fh_loader like netmsm's guide says.No,leave everything as is and just flash away!Make sure you make a back up first just in case anything goes wrong.
Surgemanxx said:
Yes,restore them with fh_loader like netmsm's guide says.No,leave everything as is and just flash away!Make sure you make a back up first just in case anything goes wrong.
Click to expand...
Click to collapse
I can install the backup without problems, I perfectly restore the imei and stop giving the NTCODE error, I also restore the serial as before. Unfortunately, the network error continues, apparently the solution for now is only with box, thank you very much for your help and patience, let me know if you have any news.
mclarenf195 said:
I can install the backup without problems, I perfectly restore the imei and stop giving the NTCODE error, I also restore the serial as before. Unfortunately, the network error continues, apparently the solution for now is only with box, thank you very much for your help and patience, let me know if you have any news.
Click to expand...
Click to collapse
Even with a Medusa box,the G8x as of now can't repair the network permalock issue after IMEI repair.V60 yes from what I was told,but I would still need to see proof of that myself because I sure haven't seen it..lol...But,glad I could help you partially with the backup!
mclarenf195 said:
Friend I have a question, should I restore the LUNS files with fh_loader how in the netmsm guide?
[Tutorial] Rescue From HARD BRICK
Don't worry! Everything's gonna be alright ;) You may accidentally erase all partitions and GPT on your phone. Nothing is shown in "Partition Manager". Since there's no Rawprogram XML file we need an alternative method to get the phone back on...
forum.xda-developers.com
I don't delete anything? I leave the partitions how are they? Thanks for the help.
Click to expand...
Click to collapse
Did you have any luck with restoring? I flash LUNs to my g8x but still have no network (flashed native modem and modemst)
N
St.Noigel said:
Did you have any luck with restoring? I flash LUNs to my g8x but still have no network (flashed native modem and modemst)
Click to expand...
Click to collapse
No luck still with ntcode and network blocked problem
mclarenf195 said:
N
No luck still with ntcode and network blocked problem
Click to expand...
Click to collapse
You'll need your original LUNS 5 backup most definitely for it work.