I just got my 6T last month for my birthday. Great phone.Used the stock case for a couple for about 3 weeks and decided to get the Spigen Tough Armor. It seems like the case hurts my hand..? Since it's a little wider?Is it just me or is anyone else with the case experiencing this? What other cases can you guys recommend?I'm going to go back to the case the phone came with tonight.
Nope that is the case for this case. Because of the weight it presses down against your finger that naturally rests by the charging port and strains it. I have the case but only use it when I need it.
ogkillergreen said:
Nope that is the case for this case. Because of the weight it presses down against your finger that naturally rests by the charging port and strains it. I have the case but only use it when I need it.
Click to expand...
Click to collapse
What case do you normally use? Any suggestions?
ry_t said:
What case do you normally use? Any suggestions?
Click to expand...
Click to collapse
Spigen Liquid Air is really nice. It's not bulky/heavy and it provides pretty decent protection
can confirm that cases like spigen tough armor can hurt your hand specifically the thumb part due to weight, I remove my case whenever I use it while in bed, I also installed a skin on my 6T to avoid scratching the glass when going naked, I recommend this one from aliexpress:
https://s.click.aliexpress.com/e/bIj9oroM
https://s.click.aliexpress.com/e/bbu3XVoM
ogkillergreen said:
Spigen Liquid Air is really nice. It's not bulky/heavy and it provides pretty decent protection
Click to expand...
Click to collapse
i second that. I ditched my OEM cases the second i put the Liquid Air on. the only flaw so far is a rough edge on the back where the soft plastic meets hard plastic. it could be a bit more grippy, but the triangle pattern is better than the ones i had on my axon 7s Spigen cases i loved as they were slick af on the back. i have dropped my phone multiple times in that case with a Skinomi and with a Dbrand screen protector. The combos saved my phone. The SPs not so much, but between the case and those, my OP6t is still minty.
Ive the Spigen liquid air. Great case
I went with the poetic case, for 360deg protection, after having a wife proof case on my pixel XL.
I exacto'd off the charging port cover because I didn't like how the cover pressed against the USB cable and caused pressure on the port.
Only downside of the case is that it's not a sealed case like the other, and occasionally I'll take it apart to clean it out. The kickstand predictably broke, but that's to be expected since it's plastic and mounts with a few pins.
mmarcz
I have the OEM nylon case and I have the same issue too. Holding the phone in portrait for a long time hurts my hands. That's why I always take off the case when I'm lying down, but the phone becomes slippery. I'm going to install a skin on this phone, so it's not slippery when naked.
Figured I would chime in on this since I just returned my spigen tough armor.
I liked the case for protection. Had a decent screen side lip and good protection for the camera also.
However, the buttons for me were the worst part. They blend in to the side of the case to where you can't find them in the dark easily at all. The case is bulkier then a slim case but thats to be expected, it didn't bother me that much.
The kickstand was also very weak and doesn't work in portrait. I returned it and got a case that was 1/3 the price and is a little better IMO.
https://www.amazon.com/dp/B07KVFNLB4?ref=ppx_pop_mob_ap_share
Related
Anyone have any of the SUPCASE Cases?
I am looking at the
Unicorn Beetle Premium Hybrid Protective Case (Frost Clear/Gray)
http://www.amazon.com/SUPCASE-LG-G3...TF8&qid=1407151419&sr=8-7&keywords=lg+g3+case
Unicorn Beetle PRO Series Full-body Hybrid Protective Case
http://www.amazon.com/SUPCASE-Case-...TF8&qid=1407161034&sr=1-4&keywords=lg+g3+case
I have the Spigen Slim Armor now but its too slippery and the back scratches easily.
The bigger cut outs of the back buttons on the SUPCASE look like they would be better then how the SlimArmor is setup.
Can any provide any pictures of theres and how they like it? Or if they bought one but ended up not liking it and getting something else?
I received the first one you mention on Friday (clear/black) and I love it.
The fit is tight and the cut outs are perfect. It keeps the phone pretty slim and looks great with the clear back.
I had a similar case for my galaxy s4 from poetic and it was just a great look for me.
If you're rough with your phone and it gets banged around alot or dropped alot, then this might not be for you.
It offers average protection, which is good for me 90% of the time as I work in an office or I'm in my car.
For slightly better protection I bought the verus iron shield which I should be receiving today and am very excited about.
It also looks great and will protect my g3 a little better on the weekends.
Anyway, I do highly recommend the supcase after a few short days and the price is pretty good too.
As far as pics, the ones on amazon do it justice.
Hope this helps. There are many good cases and you won't do wrong with any of them.
Androider4Life said:
Anyone have any of the SUPCASE Cases?
I am looking at the
Unicorn Beetle Premium Hybrid Protective Case (Frost Clear/Gray)
http://www.amazon.com/SUPCASE-LG-G3...TF8&qid=1407151419&sr=8-7&keywords=lg+g3+case
Unicorn Beetle PRO Series Full-body Hybrid Protective Case
http://www.amazon.com/SUPCASE-Case-...TF8&qid=1407161034&sr=1-4&keywords=lg+g3+case
I have the Spigen Slim Armor now but its too slippery and the back scratches easily.
The bigger cut outs of the back buttons on the SUPCASE look like they would be better then how the SlimArmor is setup.
Can any provide any pictures of theres and how they like it? Or if they bought one but ended up not liking it and getting something else?
Click to expand...
Click to collapse
Thanks for the input.I was looking at the Versus Thor case also but some reviews said it affects signal. And the back button cut out on is tight like on the slim armor and that kinda bothers me..The supcase button cuts are larger which i think would be better
I'll let you know about the verus as I'll have it this afternoon.
I read the same about signal but I also read in more places that it wasn't true.
The video reviews on youtube really sold it for me an hopefully I like it as much as I think I will.
Take it easy.
Androider4Life said:
Thanks for the input.I was looking at the versus also but some reviews said it affects signal. And the back button cut out on is tight like on the slim armor and that kinda bothers me
Click to expand...
Click to collapse
I have the first one and agree with bkrickels.
I might prefer something a little thinner, but this certainly isn't bulky. No complaints on the back buttons with this.
Definitely no issue with signal. I can keep a call up every time driving on this one road that my GS3 dropped the call on every time.
I do hope Qi works through this case. I'll probably know that next week when my sticker comes.
lexluthor said:
I have the first one and agree with bkrickels.
I might prefer something a little thinner, but this certainly isn't bulky. No complaints on the back buttons with this.
Definitely no issue with signal. I can keep a call up every time driving on this one road that my GS3 dropped the call on every time.
I do hope Qi works through this case. I'll probably know that next week when my sticker comes.
Click to expand...
Click to collapse
Back button complaint was on the Verus Case and my slim armor..signal issues was geared towards reviews on the Verus case
I got the Unicorn Beetle and so far I like it. It has a good feel in your hands but it does add some bulk to the rear of the phone. It is a somewhat thick case and does add some mm onto the phone and weight.
I forget how much it does so until I remove the case and feel how light and thin the G3 actually is.
It does offer some great protection and this case WILL NOT bounce or fall apart during a fall or impact. The G3 fits impressively nice and snug in its case.
It is a PITA to remove the phone though, this thing is practically cemented in but once you know how to get it off, but just doesn't take as long but still is hard to do so.
It does come with a built in screen protector but I didn't need it because I had a tempered glass one installed. So I removed it and then had to spend half an hour removing all the glue that was holding it in place. The damn protector just pops out and leaves ALL its glue and adhesive on the inside of the front section of the case.
I used Goo Gone, thinner, hot water and soap and I still had to scrub it off. What a PITA...
But, I need a rough and tumble case for my job and the Unicorn does it.
Just be forewarned, it does add a bit of bulk and weight to the phone but it feels good holding it and! It has its corners notched off, giving it a Galactica prop like effect.
JustLok said:
I got the Unicorn Beetle and so far I like it. It has a good feel in your hands but it does add some bulk to the rear of the phone. It is a somewhat thick case and does add some mm onto the phone and weight.
I forget how much it does so until I remove the case and feel how light and thin the G3 actually is.
It does offer some great protection and this case WILL NOT bounce or fall apart during a fall or impact. The G3 fits impressively nice and snug in its case.
It is a PITA to remove the phone though, this thing is practically cemented in but once you know how to get it off, but just doesn't take as long but still is hard to do so.
It does come with a built in screen protector but I didn't need it because I had a tempered glass one installed. So I removed it and then had to spend half an hour removing all the glue that was holding it in place. The damn protector just pops out and leaves ALL its glue and adhesive on the inside of the front section of the case.
I used Goo Gone, thinner, hot water and soap and I still had to scrub it off. What a PITA...
But, I need a rough and tumble case for my job and the Unicorn does it.
Just be forewarned, it does add a bit of bulk and weight to the phone but it feels good holding it and! It has its corners notched off, giving it a Galactica prop like effect.
Click to expand...
Click to collapse
Thanks for the info..This Unicorn Beetle PRO Serie is case I am leaning towards..On my past phones Glaxay Nexus and Note 2 i used Otterbox defender and Seidio cases. So I would assume this adds about the same bulk.
Do you have any pics of the phone in the case or side by side to how much bulk it does add?
Also curious if the back scratches easy or holds up well.
I have a glass protector also so id be removing the bultin one
Ordered the Verus Thor from Amazon and I ended up sending it back. To me, it wasn't slim. It added some bulk to it. I have the Seidio Surface and I love it. Minimal bulk and still keeps near its original form factor.
i have the one with the clear back and i had it on my m8 and it is one of the best cases out there.
I just got my G3 on Friday and the first thing I did was go on Amazon and order the Clear/Black Supcase and temepered glass screen protector. They really make the best slim TPU style case. Nice and tight fitting, never had to worry about the material stretching on your like other TPU style cases. If there is a Supcase for my device im running it plus tempered glass and im good! Can't go wrong with it.
Not concerned with the case keeping a slim design..I'd rather have protection over looks
Using a Supcase, black with black.
Slim and works fine with my tempered screen protector.
Androider4Life said:
Anyone have any of the SUPCASE Cases?
I am looking at the
Unicorn Beetle Premium Hybrid Protective Case (Frost Clear/Gray)
http://www.amazon.com/SUPCASE-LG-G3...TF8&qid=1407151419&sr=8-7&keywords=lg+g3+case
Unicorn Beetle PRO Series Full-body Hybrid Protective Case
http://www.amazon.com/SUPCASE-Case-...TF8&qid=1407161034&sr=1-4&keywords=lg+g3+case
I have the Spigen Slim Armor now but its too slippery and the back scratches easily.
The bigger cut outs of the back buttons on the SUPCASE look like they would be better then how the SlimArmor is setup.
Can any provide any pictures of theres and how they like it? Or if they bought one but ended up not liking it and getting something else?
Click to expand...
Click to collapse
I'm rocking the Hybrid Case and love it. I've been an exclusive Spigen customer for years but their case had that cutout which turned me away. This Supcase has the same protection level and looks just as good. The clear back keeps the phones sharp look too. Highly recommend!
I have the first one in gray/clear on my white G3. Looks good. Good protection. Have to agree on earlier post that it is difficult to remove phone from.
Did you look ringke max case? For me is perfect one
i bought both!
i love the frost one and the bigger when when i plan to go outdoors (camping, hiking)
but the slimmer frost one is my daily.
I have one but found the straight edges make it a little uncomfortable to hold. I've gone back to the ultra slim gel case from eBay for about 2.99 feels great and noticeably lighter.
i have the slim sup case.
I like how tight fit it is, even though sides are soft, because fit is so tight, it doesn't move at all. really good case
i don't like how the back is so slippery.
try the Digtronic one too.. I'm tempted to order that one as a backup case.
I have the first case you posted in clear with Gray edges. It looks great on my white phone. My only complaint is that the cut outs on the bottom are uncomfortable. When I am playing with my phone for a while. They irritate my pinkie.
Sent from my LG-D850 using XDA Free mobile app
I usually never had a problem with them, its usually what I buy when I upgrade. But now after taking it off. I really dislike it. That soft shock absorber thing that the phone rests on apparently melts to the phone if it gets too hot. Which it does frequently. I had to peel my phone out of the case and on the back was all the stickey residue covering the back of the phone. A pain to clean. Any recommendations for a case that protects, looks better, and doesn't melt?
Ilikecheese said:
I usually never had a problem with them, its usually what I buy when I upgrade. But now after taking it off. I really dislike it. That soft shock absorber thing that the phone rests on apparently melts to the phone if it gets too hot. Which it does frequently. I had to peel my phone out of the case and on the back was all the stickey residue covering the back of the phone. A pain to clean. Any recommendations for a case that protects, looks better, and doesn't melt?
Click to expand...
Click to collapse
Spigen slim armour is a decent case. It's not too big in your pocket, doesn't stick, and has 2 piece construction for decent shock absorption.
Ah, I've seen it. Looks pretty nice. Might just say screw it and go with zerolemon lol
Great case, but too dang bulky, i love my spigen case
Ilikecheese said:
I usually never had a problem with them, its usually what I buy when I upgrade. But now after taking it off. I really dislike it. That soft shock absorber thing that the phone rests on apparently melts to the phone if it gets too hot. Which it does frequently. I had to peel my phone out of the case and on the back was all the stickey residue covering the back of the phone. A pain to clean. Any recommendations for a case that protects, looks better, and doesn't melt?
Click to expand...
Click to collapse
I have always wondered why I dont see more people using body glove cases, I have been using them for years, they are slim, look good, good quality, protect the phone well and the price is good, there are alot of other good cases out there but I found the body glove case is just as good and runs about $15, alot less then most other good cases....otter boxes suck, they are bulky as hell and never liked them, I had one a few years ago on a phone and got rid of it, my work gives me an I-phone to use and aside from the phone being a piece of s**t they make me keep an otter box on it, it makes the phone even more of a piece of s**t, LOL.....
Hahaha yeah I feel it. I took mine off my of DNA cause it just felt ****ty and I ended up shattering that phone but I have it on the g3 only because I don't wanna destroy this. I rarely drop my phones too but it only takes that one unlucky time. I shall buy dis new case
I had this case for a while and liked it...http://www.bestbuy.com/site/platinu...lack/7251018.p?id=1219260610755&skuId=7251018
I've now got the spigen slim armor and overall I like it....however the slicker back makes it not sit still when laid flat on a table or something, and the volume cutout sucks imho. But other than that a solid choice.
I picked up the Body Glove Rise case today at Walmart. I had a Body Glove on my last phone (RAZR HD) and it worked well. Dropped the phone (RAZR that is) once or twice and no damage or anything to the phone. One drop was face down and the bezel protection really did it's job. Overall, I like this case as it doesn't add much bulk at all so it still fits in my pocket comfortably. Haven't dropped the G3 yet and hopefully, never will, but this case gives me a sense of protection that I didn't have when the phone was naked. Doesn't mean I'll be less careful with it. On the contrary, I'll still continue to be cognizant of maintaining a firm grip on the phone at all times, but at least I have a better chance of the phone surviving a drop with the case than without it.
It looks nice too and now I feel like I have a better grip on the phone.
Which case did you get, the defender or the symmetry? I got the defender, and yeah, great protection, but makes the phone way too big. I was wondering if the symmetry was a little less cumbersome.
I've used otterbox commuter cases in the past and loved them, but this phone is so damn big already, I'm looking for recommendations myself.
Ilikecheese said:
I usually never had a problem with them, its usually what I buy when I upgrade. But now after taking it off. I really dislike it. That soft shock absorber thing that the phone rests on apparently melts to the phone if it gets too hot. Which it does frequently. I had to peel my phone out of the case and on the back was all the stickey residue covering the back of the phone. A pain to clean. Any recommendations for a case that protects, looks better, and doesn't melt?
Click to expand...
Click to collapse
I went from the defender to the Seidio Dilex case/holster combo. Great made case!
Sent from my LG G3
My son had his LG g3 in the OtterBox for some time, I took it out of the OtterBox to put a QI receiver on the back to surprise him for Christmas by having his phone on a QI charger when he woke up. The edges all the way around the phone or severely scuffed for the inside of that case. Not the front or the back, just the edges. He's not using that case anymore.
This is the one I'm using, similar to the OtterBox, but much nicer.
3 in 1 Rugged High Impact Hybrid Anti-Shock Pads Hard + Soft Durabl... http://www.amazon.com/dp/B00MC64WP4/ref=cm_sw_r_udp_awd_MnHQub1D00G06
I have had many cases on the g3, from Incipo, spigen, off brand cheapos and now the Defender from Otterbox. It definitely adds bulk, but by far the most protection. I feel better now, peace of mind I suppose.
Loved the slim armor spigen, but it scratches like crazy!
The Spigen Slim Armor is nice, but mine has issues with popping out of the corners sometimes. Theres a case called the Hyperion thats nice too. Dual layer but just not as protective
Anybody have anything to report on the SUPCASE Unicorn Beetle Pro cases?
$22 from Amazon http://www.supcase.com/smartphone-c...eries-full-body-rugged-hybrid-protective-case
http://www.amazon.com/Unicorn-Beetl..._2_m?s=wireless&ie=UTF8&qid=1429209281&sr=1-2
Well I just bought the blue Otterbox Defender for my new G3 and I like it so far. I just wish the rubber outer layer was the soft silicone rubber instead of the harder rubber but it'll do.
So I recently just bought the Sprint Lg G3 and I loved it. I felt very insecure using my phone bare naked and didn't feel comfortable putting it in my pocket in fear of scratching the back or the screen. Within days of having this phone, I have already scratched the back battery plate cover (very minimal though).
So I went ahead and bought the Spigen Slim Armor case along with the iCarez tempered Glass Screen Protector. Both go well with each other.
-Spigen Slim Armor Case: http://www.amazon.com/dp/B00JQI2LNQ/ref=twister_B00M8RXZ64?_encoding=UTF8&psc=1
-iCarez Tempered Glass Screen Protector: http://www.amazon.com/Anti-Scratch-Bubble-free-Fingerprint-Protector-Replacement/dp/B00KGSW734/ref=sr_1_1?s=wireless&ie=UTF8&qid=1420355354&sr=1-1&keywords=icarez+lg+g3
I have loved both products since I received them. The Spigen armor fits on so well with all the right cutouts (perfect). It doesn't make the phone that fat honestly. The iCarez screen protector is amazing as well. It comes off very easily if you peal the edge with your fingernail which helps when applying the screen. I would highly recommend the iCarez tempered glass screen protector to all G3 owners out there. The quality of the glass is amazing and feels just as amazing as the original screen. It has all the right cutouts and is very easy to install with no problems with air bubbles (but be careful of dirt under the screen).
I'd highly recommend the Spigen Slim Armor to anyone looking for a case.
This is the second phone I have had using a Spigen Slim Armor case with (Samsung GS4 was the first) and I agree with IamFlynn. The case is very nice, great fit, great quality, and it makes the device just slightly fatter than without. It feels like a very expensive case once it is on the phone. As soon as I got the phone, before I left the Sprint store, it was already on. I haven't taken it off much since it feels so good on the phone.
Heavy Fluid said:
This is the second phone I have had using a Spigen Slim Armor case with (Samsung GS4 was the first) and I agree with IamFlynn. The case is very nice, great fit, great quality, and it makes the device just slightly fatter than without. It feels like a very expensive case once it is on the phone. As soon as I got the phone, before I left the Sprint store, it was already on. I haven't taken it off much since it feels so good on the phone.
Click to expand...
Click to collapse
I've had 2 slim armor cases (N5 and this one) and they have both been extremely slippery. So much so that it has actually caused me to drop the phone in times when I normally wouldn't. As for drop protection, I can say this case on my G3 isn't the greatest. It slipped out of my hand once and hit asphalt. The first bounce seemed to do a good amount of protection, but the phone came out of the case and landed separately from the case. I've since gone with a different one with more texture, but this is a slick looking case indeed.
i love this case but i have to agree that it is a little slippery. One thing that really bugs me although i highly doubt that they considered it when designing the case is that i cannot prop it up on something unless the angle is just right because of the hard plastic it just slips. I like to watch netflix when im cooking or what ever and getting this thing to sit upright is chore. But ive had the case since day one and in every other way i love it.
Rally187 said:
i love this case but i have to agree that it is a little slippery. One thing that really bugs me although i highly doubt that they considered it when designing the case is that i cannot prop it up on something unless the angle is just right because of the hard plastic it just slips. I like to watch netflix when im cooking or what ever and getting this thing to sit upright is chore. But ive had the case since day one and in every other way i love it.
Click to expand...
Click to collapse
OMG! Me too! haha. My old case for my Epic 4g Touch had a rubber case and allowed me to because of grip but this case just doesn't but I still love it!
I've had the gold case since November and the back gets really scratched up just from being in my pocket.
AnonSVN said:
I've had the gold case since November and the back gets really scratched up just from being in my pocket.
Click to expand...
Click to collapse
I'm starting to notice that as well, it stinks but I'm okay with it for now.
I've only had mine since the week before Christmas and mine is all scratched too. Love the case though. Really compliments the phone.
I've had this case for a few months and love it! I've several phones and cases over the years and this is by far my favorite. It forms extremely well to the phone and it isn't too big or bulky.
Per what others have said, mine has a few scratches but that's what cases are for. Just means it's doing it's job LOL
Tripp-phpBB said:
I've had this case for a few months and love it! I've several phones and cases over the years and this is by far my favorite. It forms extremely well to the phone and it isn't too big or bulky.
Per what others have said, mine has a few scratches but that's what cases are for. Just means it's doing it's job LOL
Click to expand...
Click to collapse
After the comments on here and a typical YouTube research I ordered the Ultra Hybrid case. Looking forward to it. I've had the tempered glass for it and I strongly recommend it to anyone that has a G3
First off, I have ZERO affiliation with this company - I paid full price for the case and waited 2 weeks for it to come from China (I had this case with my V20 and was happy they made it for the S8)
I have bought slim cases from Ringke, Spigen, Caseology for the S8 (all from Slickdeals $$$ off posts) and so far all of them felt a bit too slick and thick(compared to what I've experienced with other phones).
I don't know why more companies don't use the "Salient point" design (what this company calls the textured back)
Makes it extremely easy to hold the phone and a good feel in the hands.
Is it worth $10 when you have other slim case options out there for much less (with promotions)? Since I've experienced the feel of it previously I personally think it's worth it. I do wish they had US stock and didn't ahve to wait so long for it.
Now I will say this thing is THIN, like this is going to offer almost no protection from a drop thin (you get corner and back protection but that's about it). I didn't get it for that, I got it to help with holding the phone. Will a skin accomplish the same- probably and I've considered the Dbrand Dragon skin too.
I will say the case fits SNUG - I had a hard time getting it off to take some pics of it
If you're interested this is the link where I got it on Amazon
https://www.amazon.com/gp/product/B06Y98H8C7
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I bought this https://www.amazon.com/gp/product/B06XH1PWX9/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 and really like it. It is slim enough for me and has great phone protection.
I've ordered this one. Clear and thin.
https://www.amazon.com/Trianium-Res...d=1493470061&sr=1-1&keywords=trianium+s8+case
Got this one today and it is sweet. Super thin and I like that it covers the buttons.
http://www.ebay.com/itm/232311855985
the thinnest case would be ones made out of polypropylene. some of them get as thin as PAPER. others get thicker/harder plastic feel, but no real point as any drops will crack your glass...
I always buy TPU thermo polyurethane which is very resilient and i've been surprised a few times on how it protected my phones. the thinnest TPU i found are the CIMO
https://www.amazon.com/Galaxy-Cimo-...011&ie=UTF8&qid=1493474636&sr=8-5&keywords=s8
I have the Spigen which is too thick, back side measuring 1.4mm on my calipers
EasyAcc TPU which i'm rocking right now which is 1.3mm
Cimo which hasn't come in yet, but... I've had them for s6 and s7 and it only measures 1mm
I like to cut a small hole and mod the TPU cases so that it works on my modded magnetic charger.
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I have this case. It's really nice. Fits well, and really is the thinnest possible case at just .025" thick. I must say it is a little slippery even after using it for a few days. I'll probably try and find a similar one that has a bit better grip, but I would certainly recommend it.
I'd also like to mention there is a small raised lip around the camera opening make the fingerprint reader easier to find while adding a little extra protection the camera.
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
AdamIsYou said:
I have this case. It's really nice. Fits well, and really is the thinnest possible case at just .025" thick. I must say it is a little slippery even after using it for a few days. I'll probably try and find a similar one that has a bit better grip, but I would certainly recommend it.
I'd also like to mention there is a small raised lip around the camera opening make the fingerprint reader easier to find while adding a little extra protection the camera.
Click to expand...
Click to collapse
I just received this case and it's super slippery.
thinking to try the one that OP bought https://www.amazon.com/gp/product/B06Y98H8C7
or
this eBay one http://www.ebay.com/itm/232311855985
arampapaz said:
Got this one today and it is sweet. Super thin and I like that it covers the buttons.
http://www.ebay.com/itm/232311855985
Click to expand...
Click to collapse
How do you like the case so far? is it slippery at all? what is it made out of?
Thanks
SptMogul said:
I just received this case and it's super slippery.
thinking to try the one that OP bought https://www.amazon.com/gp/product/B06Y98H8C7
or
this eBay one http://www.ebay.com/itm/232311855985
How do you like the case so far? is it slippery at all? what is it made out of?
Thanks
Click to expand...
Click to collapse
Loving it so far. It is a bit slippery though, not like other TPU cases I have which provide more grip. The separation between the camera and fingerprint scanner is a nice touch too. I'm guessing it is made from some sort of TPU., it is soft and flexible but not silicone. Be aware this is very light protection. I just wanted something to prevent scratches caused by everyday use. I was going to go naked, but this is pretty close and gives some protection.
I'm loving the new spidgen neo hybrid case
Not sure what spidgen case(s) you've tried this far but I absolutely love the neo hybrid case...
Highly recommend this one...
Check this out: Spigen Neo Hybrid Galaxy S8 Case Herringbone with Flexible Inner Pr... https://www.amazon.com/dp/B06XP521V1/ref=cm_sw_r_sms_awdb_thRbzbWYMDS0A
For under 15bux hell, I bought 2 (different colors)!
Look, this case is meant to be a minimalist case so I'm not messaging any claims about what would happen if you dropped it face (screen) first onto gravel or an uneven surface but face first on a flat surface the screen is protected and any other basic drop on a corner, back or side I'm fairly certain it would be fine... I'm even able to charge on a Samsung qi wireless charger with the case on...
The textured back is perfect for holding it and gives the phone a nice secure fit to your hand...
I'd give it a 9/10 as it could use a little motmore stand out protection at top and bottom to better protect The screen - but that said, this case is soo thin you won't even notice it on your front jeans our slacks pocket... its seriously svelte...
I picked up spidgen's screen protector 2pk and it's just ok not a fan of The clarity but it's staying put without issue in this case and will have to do until zagg remedies their issues with Their tempered glass for the s8 which is virtually useless and not very case friendly... (if anyone has found a good tempered glass protector for the s8 please tag me or pm me -ty)
Chris
ElBeaner said:
First off, I have ZERO affiliation with this company - I paid full price for the case and waited 2 weeks for it to come from China (I had this case with my V20 and was happy they made it for the S8)
I have bought slim cases from Ringke, Spigen, Caseology for the S8 (all from Slickdeals $$$ off posts) and so far all of them felt a bit too slick and thick(compared to what I've experienced with other phones).
I don't know why more companies don't use the "Salient point" design (what this company calls the textured back)
Makes it extremely easy to hold the phone and a good feel in the hands.
Is it worth $10 when you have other slim case options out there for much less (with promotions)? Since I've experienced the feel of it previously I personally think it's worth it. I do wish they had US stock and didn't ahve to wait so long for it.
Now I will say this thing is THIN, like this is going to offer almost no protection from a drop thin (you get corner and back protection but that's about it). I didn't get it for that, I got it to help with holding the phone. Will a skin accomplish the same- probably and I've considered the Dbrand Dragon skin too.
I will say the case fits SNUG - I had a hard time getting it off to take some pics of it
If you're interested this is the link where I got it on Amazon
https://www.amazon.com/gp/product/B06Y98H8C7
Click to expand...
Click to collapse
I also have the Nillkin PC Ultra thin case and have also found it to be to best compromise between offering decent protection and staying pretty slim. There also a tiny lip on the screen side so that it won't rest the glass on surfaces. Looking at it from the front, you can hardly tell that the case is on. The Nature TPU case by Nillkin is also very nice, but you can only get it from China at the moment.
hejay said:
I also have the Nillkin PC Ultra thin case and have also found it to be to best compromise between offering decent protection and staying pretty slim. There also a tiny lip on the screen side so that it won't rest the glass on surfaces. Looking at it from the front, you can hardly tell that the case is on. The Nature TPU case by Nillkin is also very nice, but you can only get it from China at the moment.
Click to expand...
Click to collapse
They're now available on Amazon with prime shipping
Still rocking this case and love it
kz121 said:
Not sure what spidgen case(s) you've tried this far but I absolutely love the neo hybrid case...
Highly recommend this one...
Check this out: Spigen Neo Hybrid Galaxy S8 Case Herringbone with Flexible Inner Pr... https://www.amazon.com/dp/B06XP521V1/ref=cm_sw_r_sms_awdb_thRbzbWYMDS0A
For under 15bux hell, I bought 2 (different colors)!
Look, this case is meant to be a minimalist case so I'm not messaging any claims about what would happen if you dropped it face (screen) first onto gravel or an uneven surface but face first on a flat surface the screen is protected and any other basic drop on a corner, back or side I'm fairly certain it would be fine... I'm even able to charge on a Samsung qi wireless charger with the case on...
The textured back is perfect for holding it and gives the phone a nice secure fit to your hand...
I'd give it a 9/10 as it could use a little motmore stand out protection at top and bottom to better protect The screen - but that said, this case is soo thin you won't even notice it on your front jeans our slacks pocket... its seriously svelte...
I picked up spidgen's screen protector 2pk and it's just ok not a fan of The clarity but it's staying put without issue in this case and will have to do until zagg remedies their issues with Their tempered glass for the s8 which is virtually useless and not very case friendly... (if anyone has found a good tempered glass protector for the s8 please tag me or pm me -ty)
Chris
Click to expand...
Click to collapse
Could you tell me how much it weighs? Amazon lists 1.4 ounces for both item and shipping weight. That's way to heavy for me.
ElBeaner said:
They're now available on Amazon with prime shipping
Still rocking this case and love it
Click to expand...
Click to collapse
Really? The only nature cases that I've found are shipping from China on Amazon at the moment.
i bought this
https://kase.com/collections/s8
hejay said:
Really? The only nature cases that I've found are shipping from China on Amazon at the moment.
Click to expand...
Click to collapse
https://www.amazon.com/Samsung-prot...TF8&qid=1493729049&sr=8-1&keywords=nillkin+s8
There is the S8 model
S8Plus model
https://www.amazon.com/Samsung-prot...id=1493729085&sr=8-5&keywords=nillkin+s8+plus
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Looks nice. It has a small lip at front to protect the screen?
Vogal said:
Looks nice. It has a small lip at front to protect the screen?
Click to expand...
Click to collapse
No Protection with this case. It clearly says in description only for scratch. If you want full protection I would suggest that you get this one from Samsung is very slim:
https://www.amazon.com/gp/product/B06XHWHYLV/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Bets case I ever had
Spigen Thin Fit Galaxy S8: https://www.amazon.com/gp/product/B...54BCW&linkId=325db0677b883d6c92a8d1a83ac09792
Spigen Thin Fit Galaxy S8 Plus : https://www.amazon.com/gp/product/B...4LGHJ&linkId=22db5b6f758a85f0a88aaa7787bd29bb
ElBeaner said:
https://www.amazon.com/Samsung-prot...TF8&qid=1493729049&sr=8-1&keywords=nillkin+s8
There is the S8 model
S8Plus model
https://www.amazon.com/Samsung-prot...id=1493729085&sr=8-5&keywords=nillkin+s8+plus
Click to expand...
Click to collapse
How is the grip
---------- Post added at 05:05 AM ---------- Previous post was at 04:49 AM ----------
Does the olixar flexishield actually have something special for grip? They say it's a non slip coating but is it any different than regular tpu
Spigen has been my go to case maker for the last 5 years and once again I was not dissapointed with the quality. The case is a perfect fit for my Huawei P20 Pro and looks stylish. All buttons and ports are easily accessible (there are cutouts for cameras, speakers, USB C port, IR blaster and microphone). The case doesn't add too much bulk and the buttons are easy to press. There is a lip on the front surrounding the display that should protect it from drops face down.Would definitely recommend. The camera on the back doesn't stick out and the phone lies flat on the table.
For 9.99£ it's a bargain imo. Link to Amazon.
I've decided to live dangerously with this phone, I've ordered a KitBag from Amazon and will have no case or screen protector on it, unless a DECENT full coverage one comes along
I got the same thing but unbranded for £3.99 on ebay. literally exactly the same.
jaju123 said:
I got the same thing but unbranded for £3.99 on ebay. literally exactly the same.
Click to expand...
Click to collapse
Would you happen to have a link and some photos of the one you found?
shem2409 said:
Spigen has been my go to case maker for the last 5 years and once again I was not dissapointed with the quality. The case is a perfect fit for my Huawei P20 Pro and looks stylish. All buttons and ports are easily accessible (there are cutouts for cameras, speakers, USB C port, IR blaster and microphone). The case doesn't add too much bulk and the buttons are easy to press. There is a lip on the front surrounding the display that should protect it from drops face down.Would definitely recommend. The camera on the back doesn't stick out and the phone lies flat on the table.
For 9.99£ it's a bargain imo. Link to Amazon.
Click to expand...
Click to collapse
Thank you for posting this review. I was about to buy one too but was concerned If any of the camera bump stuck out or was nicely tucked in. Spigen rugged armour is the best phone case I've ever had. incredible shock protection yet doesn't scratch funny enough. They clean up great and look new throughout (or at least mine does).
Damn, just got this case. Really slick, I'm a little worried about the camera it's rather flush but better than nothing haha
Gravol said:
Damn, just got this case. Really slick, I'm a little worried about the camera it's rather flush but better than nothing haha
Click to expand...
Click to collapse
Try the Slim Armor, gives a good 2mm or so protection to the camera
nibs777 said:
Try the Slim Armor, gives a good 2mm or so protection to the camera
Click to expand...
Click to collapse
I can vouch for the Slim Armor case. Just picked up a P20 Pro yesterday and Spigen was my go-to brand and it's really nice and not super bulky.
The rugged armor is good but the glass screen cover that Spiegen offers is crap! I've had it on the phone for 2 days, just took it out of my pocket and theres a crack right across the screen cover! This is with the Rugged Armor on the phone too, so theres a nice big lip above the screen cover to protect the edges. Nothing else in my pockets either, I'm very careful with my phones.
I have to disagree with the above ref the Spigen screen protector, I have had one on for 3 weeks and am really impressed with it. My phone has been with me everywhere in that time and has taken a couple of drops and knocks and the cover is holding up really well, also it looks and feels far better than the others I have tried. I'm using with the Slim Armor and together it's very well protected
I'd be surprised if the screen protector just magically broke on it's own. Probably just took some minor impact at a fateful angle. Maybe ask Spigen for a warranty and see what happens.
I returned my spiegen tough armour because of the lack of camera protection.
went with this instead... purchased 3 of them(different colors)
great case with camera protection
Dooqi Huawei P20/P20 Pro/P20 Lite Ring Stand Holder Shockproof Rugged Case Cover
I got the Spigen case before I picked up the P20 Pro. Never had an issue with it; I even stuck an iRing to the back of the case so that it gives me some added security if I somehow lose grip of the case.
It's true that the camera hump is close to the plastic spigen back. But it is enough to protect the camera. There is no doubt that it could be better. Spigen have recognised this and brought out a new case. See the spigen website
Anime had experience with Mark Armor Case from Spigen?