Hi... I unlocked bootloader for my (Letv Le 1s X507) through adb, and phone got bricked ( Just keeps rebooting itself ). I tried flashing various stock ROMs through SP Flash tool (Download Agent - MTKAllinone.bin) and ROM scatter file, but the progress on SP tool never goes beyond 0%.
Then I started experimenting with SP flash, I tried selecting (Download Agent - DApl.bin) and download only boot,recovery it goes successfully. The issue is with Preloader file when I download it, it gives different errors.
I'm using Win7 - 32 bit. Tried different Vcom drivers, changing port / cable / ROMs / SP versions nothing works. I'm stuck
Thanks for reading this & Please Help.
UPDATE - Issue Resolved.
Here's what I did, Used SP flash to download boot, system, recovery etc everything except Bootloader. Because boot loader was the culprit here which was not getting flashed ( Still don't know what's the issue but I doubt it's Win 7 - 32bit driver issue ). So gave it around 2 hours with SP flash, again the progress was 0% throughout still gave it time. And I think it was actually flashing.
And then I got stock recovery, then flashed stock rom by otg through stock recovery. Still it gave same bootloops, but I got into Fastboot. Now the game starts, ran ADB commands flashed twrp. Already had nandroid, flashed it. Finally flashed RR 5.85 this time it booted up without any issues. :laugh:
Related
Hello,
Just yesterday I got my Elephone p5000
I have been setting up applications and so on. I have installed xposed and installed one hand module. It worked OK.
Later I was trying to setup google authenticator and the device just hang and rebooted.
And it went into bootloop.
I can't go to recovery mode: VolumeUP+Home+Power-> Recovery mode just starts another bootloop.
So I tried to flash an official rom from with sp flash tool SP_Flash_Tool_exe_Windows_v5.1504.00.000.
It works OK and completes with green indicator. But I still have the same bootloop.
I tried to flash custom recovery tool: TWRP_Recovery_2850_P5000 it also flashes successfully but no use of doing that. Nothing happens.
I have formatted the device along with bootloader with sp flash tool and flashed with official rom. No use.
The device goes into fastboot mode. I tried to flash TWRP recovery.img with help of fastboot but it gives an error:
FAILED (remote:
partition 'recovery' not support flash)
So far I tried all these things.
I am a newbie in flashing and using android devices. I have been using iphone so far. So sorry if I used wrong terms.
FYI:
The battery cannot be taken from the device. I am clicking on reset button on the back of device to switch it off.
Any help would be appreciated.
Thank you.
An MTK device is very hard to "brick" IF you happen to have the the firmware in SpFlashTool format - there is one on "needrom.com" and use the SpFlashTool v5.11452 or better (so far that is the latest for Octa Core 64bit). I specialises in modding MTK centric ROM , I know what I am saying. If bootloop it probably (guessing only) the TWRP version is not suitable for P5000 , there is always CWM to fall back(try searching on MIUI site).
Although I know a lot of users like to use Xposed but I never ever put any Xposed modules in my mod ROM , I want a working ROM for my users to enjoy their devices. I stayed away from Xposed bcoz I had seen some bad after effect , even after uninstalling the modules there are some stray files left behind. Good luck.
Hello!
I have a bricked phone. When I got him, he was in a state "loaded to the screensaver and stop".
I decided to flash him using recovery (carliv touch recovery 2.2). Thanks to recovery I copied all the files from phone. But all my attempts of flashing were unsuccesful - I've got the errors while recovery did an unzipping.
That because I decided to use SP FlashTool. But I've forever got the same error 5069.
I notice, that I can format my phone and download the preloader. But it's all what I can.
What I tried (what i remember):
to load without and with battery;
to put a battery after beginning of flashing;
to flash with pushed power, volume control buttons - all together and alone
to use another system, cable and computer (2 cables and computers, windows and ubuntu);
to flash different versions (from off site);
to use different versions of sp flashtool
Also I found a video, where propose to do the backup of working phone (prestigio 3400) by MTK droid tool and try to flash this.
I would be very grateful if you help me. Thanks
Hello there. I have an Elephone P9000 Lite, which required a re-flash. Fair enough. After I formatted everything then flashed the stock ROM... I tried booting it up, but the boot animation won't show up, instead, it's all just a black screen. It went on like that for 10 minutes, before I decided to stop trying. It got bricked. Now, I decided to try and flash CM13 (I found a ROM on this forum), but I can't flash it using SP Flash Tool (what I used to flash stock) because it's an .img file, so it doesn't have a scatter. I came to the conclusion that I can use:
a) Recovery, which I can't access due to the device being bricked
or
b) ADB, which requires USB debugging to be enabled, but I can't enable it due to my device being bricked.
Can anyone help me?
(I have quite some experience with flashing and stuff, but I have no idea how to flash .img using a PC without having to access the phone's OS)
So, I have an XT1723, a Moto C Plus. Following @shr!pad's guide, I was able to install TWRP on it, and flash SuperSU with the SYSTEMLESS=true modifier in /data/.supersu...
...however, the phone now will not go past the bootloader; it hangs indefinitely.
So I tried sideloading the LineageOS 14.1 ROM from here over ADB while in TWRP. It goes to the booting screen, the one with the blue arch and the bubbles travelling along it...and it stayed there for 8 hours overnight. Still doing it this morning. I then tried the 15.1 ROM; same result. Flashing via ADB Sideload mode led to the same problem. Magisk didn't help either.
Therefore, I decided to go back to stock rom. I found a stock ROM archive, which had SP Flash Tool and a Scatter file for the entire memory map of the device. This worked when I flashed TWRP...but now, I get BROM (2004) errors, no matter which computer and which USB port I use!
Bhai, did I break my phone forever? How do I fix this?
Hi... I unlocked bootloader for my (Letv Le 1s X507) through adb, and phone got bricked ( Just keeps rebooting itself ). I tried flashing various stock ROMs through SP Flash tool (Download Agent - MTKAllinone.bin) and ROM scatter file, but the progress on SP tool never goes beyond 0%.
Then I started experimenting with SP flash, I tried selecting (Download Agent - DApl.bin) and download only boot,recovery it goes successfully. The issue is with Preloader file when I download it, it gives different errors.
I'm using Win7 - 32 bit. Tried different Vcom drivers, changing port / cable / ROMs / SP versions nothing works. I'm stuck
Thanks for reading this & Please Help.
Try un checking preloader in sp flash tool. And make sure to load the all in one da bin file in download agent.