Related
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
new build the problem detection card corrected sim recognizes them
the bad the camera does not work and is slow.
Download link: https://github.com/EnesSastim/Downl...A-2018-09-20/PixelExperienceP-arm64-aonly.zip
sgt_peppers said:
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
The sim card it's not working in my case ..any suggestion?
Xiaby said:
The sim card it's not working in my case ..any suggestion?
Click to expand...
Click to collapse
Not in my particular case. Maybe flashing magisk?
sgt_peppers said:
Not in my particular case. Maybe flashing magisk?
Click to expand...
Click to collapse
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Xiaby said:
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Click to expand...
Click to collapse
works perfect just that you notice the temperature is somewhat high at times
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
Thank you trying it later
Xiaby said:
Thank you trying it later
Click to expand...
Click to collapse
Restart my device and now the SIM does not recognize me
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
could ytou please share a link to the latest firmware? I cannot seem to find it on this site?
CAn i just use TWRP?
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Andrikkos said:
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Click to expand...
Click to collapse
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
The_real_hati said:
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
Click to expand...
Click to collapse
Can you share the firmware link ?
Andrikkos said:
Can you share the firmware link ?
Click to expand...
Click to collapse
https://xiaomi.eu/community/
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
yes finally lol. Thanks a bunch i could not find the firmware anywhere
---------- Post added at 06:44 AM ---------- Previous post was at 06:38 AM ----------
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
Mate? No firmware/ Just another site link to get lost in? :-\
Bryceicle1971 said:
Mate? No firmware/ Just another site link to get lost in? :-\
Click to expand...
Click to collapse
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
The_real_hati said:
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
Click to expand...
Click to collapse
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Bryceicle1971 said:
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Click to expand...
Click to collapse
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
https://androidfilehost.com/?fid=1322778262903998408
The_real_hati said:
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
Click to expand...
Click to collapse
Whatever. Your being obnoxious. Given up on Android P. Overheats an RIL issues. Every time. And you just proved my point
sgt_peppers said:
Restart my device and now the SIM does not recognize me
Click to expand...
Click to collapse
Did yuo find any solution?
I found oreo and pie roms for our ultra on androidfilehost but after flashing I am not able to get the touch working. I think its a recovery issue, but the twrp-3.1.1 uploaded by zawzaw doesn't mount my system read/write, so no luck. Can anyone test the roms please? Also is there newer version of twrp available for our device?
Here is the link
https://androidfilehost.com/?w=search&s=togari
I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?
billyliem said:
I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?
Click to expand...
Click to collapse
Have you tried 3.0.2-0? That has been working for me on my C6833.
Yes, it is not working for me
Hello does the rom working? I cant install it because i cant have TWRP working in my device
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Rom tester
Hello
First of all thank you for your work, we really appreciate it, i have a suggestion, please make a Telegram group so we can join and test the rom and tell you the bugs and issues, thank you again
Which Kernel to use with this Rom?
raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
the custom rom of the android pie will be continued ?, and I think you could do a post of your roms I think it would give a good revival in this forum and release the source code of the roms and the kernel
raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.
I would love to at least have a custom Android rom oreo stable and functional but by the way it will take a little longer for this to happen
...
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Jaime albino said:
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.
Click to expand...
Click to collapse
phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Click to expand...
Click to collapse
Same Here , flashed the fix , and no touchscreen response after boot
phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no
work even in the recovery.
Click to expand...
Click to collapse
pvillasuso said:
Same Here , flashed the fix , and no touchscreen response after boot
Click to expand...
Click to collapse
i wasn't using those roms anymore because in the oreo version the camera doesn't work and mobile network too, the
9.0 version didn't work either, it's always in bootloop, but i flashed the oreo version again and the touch fix
using philz recovery and twrp and the touch worked like a charm as i said you just need to wait a few seconds, the
purpose of this fix is to fix the touch problem within the rom and not in the recovery, if your recovery doesn't
have touch is not something that this fix or i can do sorry. But i can guarantee that this fix works in this oreo
version because i tested it myself after a clean flash, please try again and tell me if it worked for you.
Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD
install error 7 in TWRP?
raschad said:
Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD
Click to expand...
Click to collapse
phhuang said:
install error 7 in TWRP?
Click to expand...
Click to collapse
Yep same to me.
Malle355 said:
Yep same to me.
Click to expand...
Click to collapse
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)
raschad said:
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)
Click to expand...
Click to collapse
Its booting but touch not working. Tried to flash the touch_fix.zip but not working.
someone needs to compile a new twrp recovery for us, xperia z ultra orphans
So we have official 9.0 update now, which means we have pie vendor installed our devices.
However, it seems non of GSI pie roms work on xz1 even though our vendor and kernel are working properly with pie firmware.
Is there anyone successfully installed 9.0 GSI rom after the official Pie update? Or is there any idea why they don't work?
Riskypedia said:
So we have official 9.0 update now, which means we have pie vendor installed our devices.
However, it seems non of GSI pie roms work on xz1 even though our vendor and kernel are working properly with pie firmware.
Is there anyone successfully installed 9.0 GSI rom after the official Pie update? Or is there any idea why they don't work?
Click to expand...
Click to collapse
everything is working fine on GSI 9.0 pie roms but if u need gcam, flash on aosp boot and vendor(because full camera2api and raw support), on stock blobs gcam doesnt work because there is no raw support on stock.
arslancn said:
everything is working fine on GSI 9.0 pie roms but if u need gcam, flash on aosp boot and vendor(because full camera2api and raw support), on stock blobs gcam doesnt work because there is no raw support on stock.
Click to expand...
Click to collapse
Thanks for your reply Can you suggest some roms that worked? Because whenever I try to boot my phone with this rom(https://forum.xda-developers.com/pr...opment-a-only-roms/ported-p-sgsi-pr2-t3845789), I get bootlooped
Riskypedia said:
Thanks for your reply Can you suggest some roms that worked? Because whenever I try to boot my phone with this rom(https://forum.xda-developers.com/pr...opment-a-only-roms/ported-p-sgsi-pr2-t3845789), I get bootlooped
Click to expand...
Click to collapse
try any updated ''GSI''(not sGSI) arm64 a only rom from here. sGSI roms have alot of bugs
arslancn said:
try any updated ''GSI''(not sGSI) arm64 a only rom from here. sGSI roms have alot of bugs
Click to expand...
Click to collapse
Thanks to your support, I've got finally found a working rom(Pixel Experienced Rom)! Maybe I think the roms I've tried are all sGSI roms that caused bootloops
Now I'm trying to use gcam now, so I've installed pie aosp vendor uploaded in sony open device project(fasboot flash oem ~~~.img). However, it seems it doesn't have problem with booting but gcam still crashes(I think it's cam2api problem). According to your previous comment, it seems I should flash aosp kernel which isn't provided by Sony. So should I manually compile the kernel to make it working?
Sorry for bothering :crying:
Riskypedia said:
Thanks to your support, I've got finally found a working rom(Pixel Experienced Rom)! Maybe I think the roms I've tried are all sGSI roms that caused bootloops
Now I'm trying to use gcam now, so I've installed pie aosp vendor uploaded in sony open device project(fasboot flash oem ~~~.img). However, it seems it doesn't have problem with booting but gcam still crashes(I think it's cam2api problem). According to your previous comment, it seems I should flash aosp kernel which isn't provided by Sony. So should I manually compile the kernel to make it working?
Sorry for bothering :crying:
Click to expand...
Click to collapse
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
arslancn said:
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
Click to expand...
Click to collapse
which version of gcam works?
arslancn said:
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
Click to expand...
Click to collapse
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Riskypedia said:
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Click to expand...
Click to collapse
:highfive: u can make a thread about flashing treble with full cameraapi 2 support and share your images with other XZ1 users!
Riskypedia said:
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Click to expand...
Click to collapse
did you have same bug on XZ1?
the battery level always in 20%.
arslancn said:
:highfive: u can make a thread about flashing treble with full cameraapi 2 support and share your images with other XZ1 users!
Click to expand...
Click to collapse
Sadly, it seems it's impossible to use AOSP based system because of its stability. It's way too unstable to use, but I think I can share the built images to make progress! Again, thanks for your help
gacky1601 said:
did you have same bug on XZ1?
the battery level always in 20%.
Click to expand...
Click to collapse
I've never experienced the bug when I used that. Did that happen to your XZ1? Or is it the problem of the other Xperia devices? The biggest problem was that it's too unstable that I can barely use that. The network oftenly disconnects and randomly reboots itself.
Riskypedia said:
I've never experienced the bug when I used that. Did that happen to your XZ1? Or is it the problem of the other Xperia devices? The biggest problem was that it's too unstable that I can barely use that. The network oftenly disconnects and randomly reboots itself.
Click to expand...
Click to collapse
Yes,my device is G8342. The wifi bug and battery level bug.
my device couldn't connect to any wifi,but sharing hotspot in 2.4ghz/5ghz was fine.
Screen colors look strange.
Randomly reboot,too.
I don't know any solution.
I only knew the methods to the image step by step from Sony's source.
Maybe we should build the kernel by ourselves
The problem you mentioned about disconnecting network, does it happens on wifi or mobile data?
Sorry, just a quick question has as resurrection remix has a treble room out, has anyone tried it?
gacky1601 said:
Yes,my device is G8342. The wifi bug and battery level bug.
my device couldn't connect to any wifi,but sharing hotspot in 2.4ghz/5ghz was fine.
Screen colors look strange.
Randomly reboot,too.
I don't know any solution.
I only knew how to build the image step by step from Sony's source.
Maybe we should build the kernel by ourselves[/QUOTE
Yeah, we should... I'm just a newbie developer, and really sad that we're lack of developers who can help XZ1 users, but I believe one day users make this out together. The dispaly color is because of AOSP's default display color temperature, maybe we can fix this out by touch some configs of kernel
Click to expand...
Click to collapse
lilbrat said:
Sorry, just a quick question has as resurrection remix has a treble room out, has anyone tried it?
Click to expand...
Click to collapse
I think you can just try it with stock boot , vendor and oem.
I will works perfectly.
Don't forget to report if there is any problem or it work properly.
---------- Post added at 04:37 PM ---------- Previous post was at 04:20 PM ----------
[/QUOTE
Yeah, we should... I'm just a newbie developer, and really sad that we're lack of developers who can help XZ1 users, but I believe one day users make this out together. The dispaly color is because of AOSP's default display color temperature, maybe we can fix this out by touch some configs of kernel [/QUOTE]
Yeah. I think there are a few developers work on XZ1.
Have .
The working perfectly rom will be our target, like the thread below.
https://forum.xda-developers.com/xperia-xz1-compact/how-to/xz1c-g8441-lilac-aosp8-1-t3762581
Share your all files so that i can work with gcam to be installed properly to latest pixel experience.
:silly:
Thank you for the build, @luisgonzales1977
Waiting for A/B build.
ZainBilq said:
Thank you for the build, @luisgonzales1977
Waiting for A/B build.
Click to expand...
Click to collapse
when you finish testing :good::silly:
Will it include Mi9 in-display FP like in phhusson's AOSP?
luisgonzales1977 said:
when you finish testing :good::silly:
Click to expand...
Click to collapse
Yeah I know...just like that....
This Rom work in Lenovo k5 pro? Is a device arm64 aonly.
any AB love ?
TheUndertaker21 said:
any AB love ?
Click to expand...
Click to collapse
they are soon testing it...:good:
luisgonzales1977 said:
when you finish testing :good::silly:
Click to expand...
Click to collapse
I am a few hours on your rom and is working bugfree for me everything i need arcore also working very nice job:good:
Excellent work !
Booted successfully on Huawei p10 lite after changing selinux/mapping/26.0.cil .
Except I have faced settings FC when opening Decor room in X-Tensions and I'm not able to make logcat due to ADB unauthorized
Thanks
android q activity animation available sir?
won't be able to bootup on mate 10 lite
flamedrops said:
won't be able to bootup on mate 10 lite
Click to expand...
Click to collapse
you test?
successfully booted up on my Lenovo S5 (K520/Seoul), but on the first setting screen after boot it shown missmatch vendor notice (it recommend to flash vendor img). i still could skip it and continue by the way.
So about the missmatch vendor, will it hurt if i don't flash it? because i don't know which file of vendor img i should flash.
update : same as reported from other user several posts before, Decor room in X-Tensions FC when open
luisgonzales1977 said:
you test?
Click to expand...
Click to collapse
yes, i use to try every other rom, now im on havoc and it works.
Boots up in Blu Vivo XI. Can't seem to get magisk to work with any gsi's. Thanks for the rom.
aljoscha81 said:
I am a few hours on your rom and is working bugfree for me everything i need arcore also working very nice job:good:
Click to expand...
Click to collapse
Hi pal. Any specific steps to flash this rom on Z17? What rom as base do you have? Any nfound vendor or something else?
surfer30 said:
Hi pal. Any specific steps to flash this rom on Z17? What rom as base do you have? Any nfound vendor or something else?
Click to expand...
Click to collapse
I am on mokee as base installed as ever no further steps
Is there a chance to get an ARM32-A build? I would like to try this rom. Looks promising!
khuy21 said:
So about the missmatch vendor, will it hurt if i don't flash it? because i don't know which file of vendor img i should flash.
update : same as reported from other user several posts before, Decor room in X-Tensions FC when open
Click to expand...
Click to collapse
not need change vendor
just need set right fingerprint values in build.prop, some magisk modules may this
or search info and change it by hand
on short - fingerprint from system build.prop need to match values from vendor build.prop
Use it at your own risk! (Don't flash it on any Q ROMs）The dtbo.img is extracted from the Chinese version of miui 9.8.15,so you better use version 9.8.15 or later, If not worked you can try other rom. This Mod is tested and it worked for me，66hz is the most，more than 60hz will be slow because of the quality of the mix3 screen. this zip include 66hz for mix3
-Download the attached zip, unzip it
-Open TWRP
-Backup your dtbo partition
-Select the corresponding dtboxx.img,choose the dtbo partition,the flash it
-Reboot
You should see the changes immediately after the restart. It's way smoother than before.
If you want to go back to default, restore your dtbo partition backup or flash the dtbo60
https://drive.google.com/file/d/1Ri0f7ixSPEIblp8ZkckatBd7aXYUXGV6/view?usp=sharing
Join the telegram an get the new file and new phone screen oc:
https://t.me/LenScreenOC
Or add my QQ number to get support (always on line):1403727621
It works. Thanks.
I tried it on the latest EU weekly 9.8.15.
The 66 hz works perfectly the rest not so much, Laggy and slow.
Work perfectly on 66hz confirm here 9.8.15 eu
Is it gonna work in other roms like pixel experience (caf) ??
thx, works perfect with xiaomi.eu beta!
so I just want to make it clear, any ROM based on EU will still work?
like im on Mi-Globe right now, on 9.8.22
also, wheres the dtbo partition?
bluviper said:
so I just want to make it clear, any ROM based on EU will still work?
like im on Mi-Globe right now, on 9.8.22
also, wheres the dtbo partition?
Click to expand...
Click to collapse
Mi globe is based on eu so it will work
raven213 said:
Mi globe is based on eu so it will work
Click to expand...
Click to collapse
thanks man.
but, how do i backup dtb in twrp?
bluviper said:
thanks man.
but, how do i backup dtb in twrp?
Click to expand...
Click to collapse
Yes back up in twrp
raven213 said:
Yes back up in twrp
Click to expand...
Click to collapse
what menu? cant find dtbo?
is that boot.img?
bluviper said:
what menu? cant find dtbo?
is that boot.img?
Click to expand...
Click to collapse
Which twrp do you have?
raven213 said:
Which twrp do you have?
Click to expand...
Click to collapse
3-3-1-0
bluviper said:
3-3-1-0
Click to expand...
Click to collapse
Use 3.3.1-5
thanks. its working out
but during boot, my animation lags
but upon entering os, it all works well.
using 66. thanks man
bluviper said:
thanks. its working out
but during boot, my animation lags
but upon entering os, it all works well.
using 66. thanks man
Click to expand...
Click to collapse
No problem
I'm sorry for asking this.
Isn't our Mix 3 screen already at 60hz? Does it have significant difference between 60hz and 66hz?
Stupid question maybe but can this be used with a GSI Pie ROM (Arrow OS)?
Listy2021 said:
Stupid question maybe but can this be used with a GSI Pie ROM (Arrow OS)?
Click to expand...
Click to collapse
Not stupid lol so don't worry and it won't work on GSI only on stock
AMZMA said:
I'm sorry for asking this.
Isn't our Mix 3 screen already at 60hz? Does it have significant difference between 60hz and 66hz?
Click to expand...
Click to collapse
not Earth shattering but once you've done it right.
its pretty cool and you'll notice it after you enter the OS.
will also help if you tweak your system animations under developer options, make them a second or more.
Doesn't boot on pixel experience (pe plus)