Good Morning,
Friday night I downloaded the new EMUI 9.1., the official version, and I installed it during the night.
I used my phone all the Saturday but it was extremly slow. I swiched off my phone several times but it never helped me.
At some point in the afternoon, the phone is reseted alone and I have not been able to use it anymore.
The phone only resets itself: it turns on, reaches the blue screen that says "Honor" and resets again. It can not be turned off.
I tried to do a HW reset (power off + volume up) but nothing happens: it reaches the blue screen and it resets again, and again and again...
The only interaction I can have is with the "Fastboot & Rescue mode" screen. Here I get the error: AP_S_Abnormal 64.
Phone Locked FRP lock.
And nothing more.
Would someone be so kind to help me or give me some recommendation/advice of what I can do?
Thank you
From where did you get EMUI 9.1?
I think he meant 9.0 and not 9.1
Soforid said:
Good Morning,
Friday night I downloaded the new EMUI 9.1., the official version, and I installed it during the night.
I used my phone all the Saturday but it was extremly slow. I swiched off my phone several times but it never helped me.
At some point in the afternoon, the phone is reseted alone and I have not been able to use it anymore.
The phone only resets itself: it turns on, reaches the blue screen that says "Honor" and resets again. It can not be turned off.
I tried to do a HW reset (power off + volume up) but nothing happens: it reaches the blue screen and it resets again, and again and again...
The only interaction I can have is with the "Fastboot & Rescue mode" screen. Here I get the error: AP_S_Abnormal 64.
Phone Locked FRP lock.
And nothing more.
Would someone be so kind to help me or give me some recommendation/advice of what I can do?
Thank you
Click to expand...
Click to collapse
So because :
- your device reboot itself to bootloader mode because 'AP_S_Abnormal 64'
- Phone is Locked FRP lock
- you don't manage to enter recovery mode to do a full wipe / factory restore
You could :
- download and use a dload package with an sd/card or an USB-OTG flashdrive in dload mode.
- or use Honor service center help
- or try again and again to boot right to recovery mode to format.
- or try erecovery restore via wifi in erecovery mode
- or try Hisuite Restore option
I think they all will restore your device to factory stock, meaning the actual user datas would be lost...
---------- Post added at 14:51 ---------- Previous post was at 14:45 ----------
Pro tips to enter recovery mode :
-USB must be unplugged (not plugged to computer)
-Hold VolumeUp key BEFORE device vibrate first at boot and keep holdind UNTIL you are in recovery mode
-Try again to reach 'recovery mode'
the pie update has been pulled because of the recovery error , have a google about it
The Mero said:
the pie update has been pulled because of the recovery error , have a google about it
Click to expand...
Click to collapse
Google heard nothing about that here...
oslo83 said:
Google heard nothing about that here...
Click to expand...
Click to collapse
https://uk.community.huawei.com/honor-phones-34/honor-9-stuck-on-erecovery-loop-after-emui-9-official-update-4340
https://uk.community.huawei.com/software-40/load-honor-screen-after-reboot-stf-l09-9-0-1-162-c432e2r1p5-4131
https://translate.google.co.uk/translate?hl=en&sl=it&u=https://www.optimagazine.com/2019/04/26/scelta-estrema-per-honor-9-aggiornamento-con-emui-9-e-stato-ritirato-per-i-suoi-problemi/1444771&prev=search
Google is your friend
I updated to 9 through hisuite because no OTA update was found . tried it and rolled back to 8 cause they removed image stabiliser fron video recording . I read somewhere else that the update was pulled cause so many were having issues , but i always do a hard reset after updating and had none of the issues described , guess i was lucky.
The Mero said:
https://uk.community.huawei.com/hon...covery-loop-after-emui-9-official-update-4340
Google is your friend
I updated to 9 through hisuite because no OTA update was found . tried it and rolled back to 8 cause they removed image stabiliser fron video recording . I read somewhere else that the update was pulled cause so many were having issues , but i always do a hard reset after updating and had non of the issues desribed .
Click to expand...
Click to collapse
If you say so.
So we should think B162 erecovery is not pushed anymore ?
oslo83 said:
If you say so.
So we should think B162 erecovery is not pushed anymore ?
Click to expand...
Click to collapse
Yeah it looks like it was a bit of a mess so just have to keep checking if they release an update for the update lol
Related
The phone told me there was a new update I started to install it, got to reboot and now is just on the elephone logo which comes every 20 sec and goes again. I cannot turn the phone off or do anything with it. Any help please
For me just shut down the phone and then reiniciat the phone ....work for me....
Enviado do meu thor através de Tapatalk
same problem here.. wtf nice update elephone, we cant be the only ones right?
now stuck on logo, restarting every 3 seconds with 100% battery...i m not even sure it will work again if battery is drained out
i can do nothing, no trys to get in factory mode or shut the phone down worked..
stuck on elephone log after upgrade
My elephone P9000 is now cycling the elephone logo every 8 seconds or so after the latest audio upgrade... It will not switch off or do anything else. Did you solve the problem. Or anyone else help. Can you share with me? Thank you.
same problem here.. wtf nice update elephone, we cant be the only ones right?
now stuck on logo, restarting every 3 seconds with 100% battery...i m not even sure it will work again if battery is drained out
i can do nothing, no trys to get in factory mode or shut the phone down worked..
Click to expand...
Click to collapse
so my battery was fully empty now.. i even pressed the power button 100 times after the battery was empty, to make sure all current is out of the phone.
plugged in charger... after 10 seconds phone start itself (after viewing the picture of empty battery) and elephone logo shows short and then back to showing picture of empty batterie cycle. After some minutes, and battery is loaded a little bit, elephone logo cycles again.
So rest in piece my p9000, i can nothing, i cant do anything from my pc because its only starting for like 5 seconds, i cant shut it down because of that and i cant get in factory mode
i am so pissed right now
just wanted to install the new update, everything worked fine like all the times before that and now my phone is ready for the trashcan.
Is there any way to reset the software without getting in factory mode?
Reset from sp flash tools?
Pro4TLZZ said:
Reset from sp flash tools?
Click to expand...
Click to collapse
the phone turns on and off in a cycle of 5 seconds, so that wont work
and i cant stop that cycle.
even if battery is 0% (i even press power button many times so really its drained out). If i recharge it, the cycle starts again without me doing anything. The Power button is not broken or something. it all began after i started new ota update and the phone rebooted like "mkitty" has the same problem it seems
Same for me, I have no idea how to restart my phone. And i dont want to loose all data I have on it.
have you tried to hold the volume up and power at the same time during the restart process to try and force recovery?
xvicedice said:
have you tried to hold the volume up and power at the same time during the restart process to try and force recovery?
Click to expand...
Click to collapse
Hello,
Yes . I have tried that.
I have a list of options that come up on the screen.
I have tried them apart from the wipe data/factory reset.
But it is still the same result.
Thank you for help.
Any more ideas?
what OTA update version did you update?
Simplytouched said:
what OTA update version did you update?
Click to expand...
Click to collapse
It said something about wifi and audio update. I followed the instructions as per a previous update (which worked OK). I never took notice of any version numbers etc.
I have all I need to flash a new rom to the bricked phone but when I connect the off phone to my pc the usb not recognised comes up and I cannot flash the rom to the phone. and yes I have the mediatek vcom drivres install. Why did I buy a Chinese phone elephone p9000 please stay well away from it. on paper is a great phone but in reality does not perform in any sense, battery only lasts 7 hours if I was lucky camera crap, gps works most of the time all that ram and power and t struggles with some videos o dear god. never again. now I cannot even read what I have on the sd cos is formatted for the phone.
juka1 said:
I have all I need to flash a new rom to the bricked phone but when I connect the off phone to my pc the usb not recognised comes up and I cannot flash the rom to the phone. and yes I have the mediatek vcom drivres install. Why did I buy a Chinese phone elephone p9000 please stay well away from it. on paper is a great phone but in reality does not perform in any sense, battery only lasts 7 hours if I was lucky camera crap, gps works most of the time all that ram and power and t struggles with some videos o dear god. never again. now I cannot even read what I have on the sd cos is formatted for the phone.
Click to expand...
Click to collapse
Its actually a great phone. Do you have twrp installed and can you get access to it? You could always boot into twrp transfer over the ROM and install it from there. If you have installed the vcom drivers then when the USB not recognized alert pops up. Go to settings and device manager. Right click the unknown device and click let me pick driver. You should be able to install it from there
The only thing I can suggest is to take the back panel of and unplug the battery. There videos on how to do this if you search YouTube or the forum. Effectively you perform a hard reset of the phone.
If and when you do get it working just twrp installed and do a backup of the whole phone working before performing any future upgrades or Rom changes. Its just better safe then sorry.
thenk you very much for that
The problem is that when I connect the phone on the off to the pc starts again the cycling through the elephone logo so the pc sees the phone for a few seconds in which does not recognises it and then is like the phone goes off until the next cycle so no time to go to device manager and install manually. but thank you for the comment.
removing the battery will void the warranty. I had the phone only since may.
It's unlikely it really matters. Your phone seller not going to take it back or fix it for free just because it's bootlopping. Well they may so just ask them. If you can't get it into recovery then a battery disconnect or contact your seller are your options
thank you
Android-UK said:
It's unlikely it really matters. Your phone seller not going to take it back or fix it for free just because it's bootlopping. Well they may so just ask them. If you can't get it into recovery then a battery disconnect or contact your seller are your options
Click to expand...
Click to collapse
I can get it into recovery mode but I haven't got any software install in the sd card to do a recovery that is why I thought my only option was the sp flashing tool and the room which I have
juka1 said:
I can get it into recovery mode but I haven't got any software install in the sd card to do a recovery that is why I thought my only option was the sp flashing tool and the room which I have
Click to expand...
Click to collapse
Well in that case all you need is a stock rom and yes just flash them with sp tools and it should start booting again. The fact you can get to recovery is a good sign.
Android-UK said:
Well in that case all you need is a stock rom and yes just flash them with sp tools and it should start booting again. The fact you can get to recovery is a good sign.
Click to expand...
Click to collapse
sorry for all of this and thank you very much for your help but when I put the phone in recovery mode by pressing the down volume and power key and connect the phone to the pc it is not recognized by the pc so I can't flash the room
Hello Everybody! First of all sorry for my bad englisch.... I have a Honor 7 with TWRP 2.8.7.0 5.0-6.0 EN. It had the factory Firmware with EMUI 3.1 Now I ´ve searched in my Honor 7 update Program for new firmware and it found the PLK-L01_C432B380. After downloading it I´ve clicked on install. The phone has shut down and the TWRP has opened. Than it installed a couple of files and without any success Message the Phone turns off. Now I can´t turn it on. Not in Fastboot mode and not in Recovery Mode. I´ve i try to connect it to the PC or try to charge it the charging LED don´t work. Only if I press the Power Button for more than 10 seconds a short vibration comes but nothing happens. I have any changes to get the phone on? The Battery is fully loaded.
Thanks Guys
gremlin1987306 said:
Hello Everybody! First of all sorry for my bad englisch.... I have a Honor 7 with TWRP 2.8.7.0 5.0-6.0 EN. It had the factory Firmware with EMUI 3.1 Now I ´ve searched in my Honor 7 update Program for new firmware and it found the PLK-L01_C432B380. After downloading it I´ve clicked on install. The phone has shut down and the TWRP has opened. Than it installed a couple of files and without any success Message the Phone turns off. Now I can´t turn it on. Not in Fastboot mode and not in Recovery Mode. I´ve i try to connect it to the PC or try to charge it the charging LED don´t work. Only if I press the Power Button for more than 10 seconds a short vibration comes but nothing happens. I have any changes to get the phone on? The Battery is fully loaded.
Thanks Guys
Click to expand...
Click to collapse
Im in the same boat, and as far as i can get is to Hope for servicecenter replacement... Og did u get it to Work again?
HonorCasper said:
Im in the same boat, and as far as i can get is to Hope for servicecenter replacement... Og did u get it to Work again?
Click to expand...
Click to collapse
Hello Casper! Unfortunately I found no way to run the Phone. I´ve send it to Honor and got it back after only two days!! They changed the main board. Now everything works.
gremlin1987306 said:
Hello Everybody! First of all sorry for my bad englisch.... I have a Honor 7 with TWRP 2.8.7.0 5.0-6.0 EN. It had the factory Firmware with EMUI 3.1 Now I ´ve searched in my Honor 7 update Program for new firmware and it found the PLK-L01_C432B380. After downloading it I´ve clicked on install. The phone has shut down and the TWRP has opened. Than it installed a couple of files and without any success Message the Phone turns off. Now I can´t turn it on. Not in Fastboot mode and not in Recovery Mode. I´ve i try to connect it to the PC or try to charge it the charging LED don´t work. Only if I press the Power Button for more than 10 seconds a short vibration comes but nothing happens. I have any changes to get the phone on? The Battery is fully loaded.
Thanks Guys
Click to expand...
Click to collapse
just remember DO NOT install emui updates in twrp , never do that.. emui updates should be installed when you are not using twrp..
I endes Up sending mine to the store where i bought it and they changed the Main curciuit board..
Hello !
So 2-3 months ago I flashed my phone and installed Lineage OS, everything was working perfectly
But today, I was on Snapchat sending a message and my phone turned off for no reason, I tried turning it on, I get the message that my device is untrusted as usual, Sony logo, then it crashes and shutdown.
I tried to boot on recovery mode with TWRP but it won't and crashes.
I also noticed that when I turn on my phone I sometime get a weird pattern on the screen, just like when a GPU is dead on PC.
Anyone has also encountered this problem ? If so, is there a way to fix it ? I don't mind turning back to stock OS as long as it works again.
Thanks for your help !
Alright, so I had some ideas but none of them worked :
- Using XperiaCompanion (Since I unlocked the bootloader it can't help)
- Tried plugging the phone to my pc while holding power down, used ADB, listed devices but it doesn't show up
Is my phone bricked ?
Try flashing stock firmware using Flashtool or Emma.
iH8Ecchi said:
Try flashing stock firmware using Flashtool or Emma.
Click to expand...
Click to collapse
It works ! Thanks a lot, you've just made my day !
I tried to flash the twrp Recovery on my J7 2017 or SM-J730F.
First i did everything as in the guide so i unticked auto reboot on odin and after it finished it didnt restart so i tried to get it in recovery like in the guide and nothing happened, it just stuck there i couldnt turn it off or do anything so i waited until the battery was empty and tried a new run but this time with auto reset. After it finished it restarted but it wouldnt want to go in recovery and always tried to get into normal android but it only showed the samsung screen turned off showed the samsung screen and so on. The only mode i couldnt into was the download mode. In it i tried to flash and other recovery that showed the same result and i tried to flash the original firmware. but Firmware flashing didnt even got trough and now i dont know what to do to get the phone to work again.
Please help me I just cant get anything on the Internet to this.
Nolofj said:
I tried to flash the twrp Recovery on my J7 2017 or SM-J730F.
First i did everything as in the guide so i unticked auto reboot on odin and after it finished it didnt restart so i tried to get it in recovery like in the guide and nothing happened, it just stuck there i couldnt turn it off or do anything so i waited until the battery was empty and tried a new run but this time with auto reset. After it finished it restarted but it wouldnt want to go in recovery and always tried to get into normal android but it only showed the samsung screen turned off showed the samsung screen and so on. The only mode i couldnt into was the download mode. In it i tried to flash and other recovery that showed the same result and i tried to flash the original firmware. but Firmware flashing didnt even got trough and now i dont know what to do to get the phone to work again.
Please help me I just cant get anything on the Internet to this.
Click to expand...
Click to collapse
You shouldn't of tried to modify the phone in the first place and stood with stock.... First off you don't put auto reboot after flashing twrp you have that option off so you can reset the phone and hold the recovery sequence so it boot in recovery and twrp patches to your recovery partion
([emoji3590]09-09-18[emoji3590])
PoochyX said:
You shouldn't of tried to modify the phone in the first place and stood with stock.... First off you don't put auto reboot after flashing twrp you have that option off so you can reset the phone and hold the recovery sequence so it boot in recovery and twrp patches to your recovery partion
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
I had it first in not auto reset but i couldnt get into the recovery after odin finished.
Nolofj said:
I had it first in not auto reset but i couldnt get into the recovery after odin finished.
Click to expand...
Click to collapse
I'm assuming this a phone without a removal able battery so you should of reset via the little reset button in the hole and hold the twrp combination while it doing it so you would of caught it
([emoji3590]09-09-18[emoji3590])
PoochyX said:
I'm assuming this a phone without a removal able battery so you should of reset via the little reset button in the hole and hold the twrp combination while it doing it so you would of caught it
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
I nevery heard of a reset button on any newer smartphone. Do you know where exactly it should be ?
Nolofj said:
I nevery heard of a reset button on any newer smartphone. Do you know where exactly it should be ?
Click to expand...
Click to collapse
No but there is always one on phones that don't have removal able battery for situations when the phone freezes out.... Google your phones emergency reset button it's usually a little hole in your phone where you put a pin in to trigger a automatic reset
([emoji3590]09-09-18[emoji3590])
PoochyX said:
No but there is always one on phones that don't have removal able battery for situations when the phone freezes out.... Google your phones emergency reset button it's usually a little hole in your phone where you put a pin in to trigger a automatic reset
([emoji3590]09-09-18[emoji3590])
Click to expand...
Click to collapse
I cant find anything on the internet related to a button or a hole for my phone. I just get tons of websites that do a reset over the recovery that i cant get in.
Nolofj said:
I cant find anything on the internet related to a button or a hole for my phone. I just get tons of websites that do a reset over the recovery that i cant get in.
Click to expand...
Click to collapse
Bro if your phone doesn't have a removeable battery there has to be a way to auto reset
([emoji3590]09-09-18[emoji3590])
PoochyX said:
Bro if your phone doesn't have a removeable battery there has to be a way to auto reset
([emoji3590]09-09-18[emoji3590]
But there isnt, maybe if i tear my phone into parts and press a button on the motherboard but im not a smartphone Repair Guy
Click to expand...
Click to collapse
Hello everyone !
I have a rooted, unlocked mi A3 with magisk and twrp everything worked fine but when i wanted to restart it, it goes to fastboot mode automatically...
I tried to fastboot reboot recovery, it boot in fastboot
If i type fastboot reboot, it goes to fastboot mode
If i press the power off button for 15 second it reboot to fastboot...
Do you have an idea how to repair this ? I don't car about loosing what is on my phone if necessary
EDIT: got some news if I set fastboot --setactive=a the phone boot correctly i can use it normally with no bug even reboot it without any problem
EDIT 2 : I solved the problem, i uninstalled magisk and everything was solved, I can get to recovery etc... Somehow magisk did something that my phone did not like
if I write fastboot setactive=b it bootloop
Thank you
it says unknown --setactive=a command
I also tried this method but system is says unknown --setactive=a command
I can't boot my mi a3.
Please help, me service center says motherboard is damaged.
It's cost 5600 Rs.
Help me please please..?????
Can you boot into twrp recovery? Turning off phone and doing power + volume up button. If yes you can try doing a factory reset.
vinod gupta said:
I also tried this method but system is says unknown --setactive=a command
I can't boot my mi a3.
Please help, me service center says motherboard is damaged.
It's cost 5600 Rs.
Help me please please..
Click to expand...
Click to collapse
Update your fastboot on the PC https://developer.android.com/studio/releases/platform-tools
I have this problem some days ago, i just change the active partition and every works as usual.
--Sorry for my bad English
vinod gupta said:
I also tried this method but system is says unknown --setactive=a command
I can't boot my mi a3.
Please help, me service center says motherboard is damaged.
It's cost 5600 Rs.
Help me please please..
Click to expand...
Click to collapse
Please read carefully: https://forum.xda-developers.com/mi-a3/how-to/rom-xiaomi-mi-a3-laurelsprout-t3962489
stuck on fastboot screen
I got a notification saying update to android 10 then I clicked ok it started to download and later installed after i cliked reboot i got a screen of fast boot and i cant do anything for it, i cant even reboot with volume up and power if i do anything i get same screen of fast boot
Kindly assist.
Mohsin
tikuff said:
Hello everyone !
I have a rooted, unlocked mi A3 with magisk and twrp everything worked fine but when i wanted to restart it, it goes to fastboot mode automatically...
I tried to fastboot reboot recovery, it boot in fastboot
If i type fastboot reboot, it goes to fastboot mode
If i press the power off button for 15 second it reboot to fastboot...
Do you have an idea how to repair this ? I don't car about loosing what is on my phone if necessary
EDIT: got some news if I set fastboot --setactive=a the phone boot correctly i can use it normally with no bug even reboot it without any problem
EDIT 2 : I solved the problem, i uninstalled magisk and everything was solved, I can get to recovery etc... Somehow magisk did something that my phone did not like
if I write fastboot setactive=b it bootloop
Thank you
Click to expand...
Click to collapse
mohsin.saboowala said:
I got a notification saying update to android 10 then I clicked ok it started to download and later installed after i cliked reboot i got a screen of fast boot and i cant do anything for it, i cant even reboot with volume up and power if i do anything i get same screen of fast boot
Kindly assist.
Mohsin
Click to expand...
Click to collapse
Are you bootloader unlocked?
stuck on fastboot screen
Sir to be honest i am not a software person and possibly wont understand what you said, but ill explain in detail what exactly happened.
First I had purchased Mi a3 with android 9 and later i got an update saying android 10 the phone was working absolutely fine.
Today i received another update which mentioned android 10 and as usual i updated it and when i restarted the phone i directly got that fast boot screen.
I went thru so many websites regarding this issue but did not find any solution and almost everywhere it said to flash the phone.
So i tried to flash the phone, I downloaded firmware, miflash tool, abd drivers, after doing all this my phone is not being detected on my pc, i checked device manager and even i got links from XDA as well i followed that as well but still no luck on detection.
Upon finding the query on detection issue i found solutions to debug from my device but my device is not starting up so i even cant do debugging as well.
Please help.
fabio_faria_23 said:
Are you bootloader unlocked?
Click to expand...
Click to collapse
mohsin.saboowala said:
Sir to be honest i am not a software person and possibly wont understand what you said, but ill explain in detail what exactly happened.
First I had purchased Mi a3 with android 9 and later i got an update saying android 10 the phone was working absolutely fine.
Today i received another update which mentioned android 10 and as usual i updated it and when i restarted the phone i directly got that fast boot screen.
I went thru so many websites regarding this issue but did not find any solution and almost everywhere it said to flash the phone.
So i tried to flash the phone, I downloaded firmware, miflash tool, abd drivers, after doing all this my phone is not being detected on my pc, i checked device manager and even i got links from XDA as well i followed that as well but still no luck on detection.
Upon finding the query on detection issue i found solutions to debug from my device but my device is not starting up so i even cant do debugging as well.
Please help.
Click to expand...
Click to collapse
Did you try to reset the phone using the recovery mode?
From switch off, press simultaneously for a few moments the Volume Up and Power Button.
you should enter in recovery mode and apply a factory reset.
this works for me
stuck on fastboot screen
I cannot enter the recovery mode when i press the buttons you said it again comes at fast boot screen and i tried to flash with mi flash tool but that flash process continuesly goes on and no changes in phone.
posy said:
Did you try to reset the phone using the recovery mode?
From switch off, press simultaneously for a few moments the Volume Up and Power Button.
you should enter in recovery mode and apply a factory reset.
this works for me
Click to expand...
Click to collapse
fastboot stuck
posy said:
Did you try to reset the phone using the recovery mode?
From switch off, press simultaneously for a few moments the Volume Up and Power Button.
you should enter in recovery mode and apply a factory reset.
hellow sir,
I have a rooted, unlocked mi A3 with magisk and twrp everything worked fine but when i wanted to restart it, it goes to fastboot mode automatically...
I tried to fastboot reboot recovery, it boot in fastboot
If i type fastboot reboot, it goes to fastboot mode
If i press the power off button for 15 second it reboot to fastboot...
Do you have an idea how to repair this ?
Click to expand...
Click to collapse
my mi a3 is stuck in the fastboot in the slot a, what should i do ?
swaraj123123 said:
my mi a3 is stuck in the fastboot in the slot a, what should i do ?
Click to expand...
Click to collapse
Unstuck it..?
But seriously, what kind of help do you expect? You haven't provided a single piece of information.