This is the official support thread for FunkyHuawei on the P30 Pro.
FunkyHuawei is a paid service which provides tools and infrastructure which can be used to update or unbrick your P30 Pro.
Generally it's useful for updating to a version of your own choice rather than waiting for OTAs.
Today (26 April), P30 Pro support was added to FunkyHuawei via the HiSuite method (which can be found in the instructions page).
The below firmwares are available for installation, from the VOG-Global section.
VOG-LGRP2-OVS 9.1.0.109
VOG-LGRP2-OVS 9.1.0.121
VOG-LGRP2-OVS 9.1.0.122
VOG-LGRP2-OVS 9.1.0.124
VOG-LGRP2-OVS 9.1.0.131
VOG-LGRP2-OVS 9.1.0.136
VOG-LGRP2-OVS 9.1.0.140
VOG-LGRP2-OVS 9.1.0.153
VOG-LGRP2-OVS 9.1.0.156
VOG-LGRP2-OVS 9.1.0.161
VOG-LGRP2-OVS 9.1.0.178
If your CUST is C636, C605, C185, C432, C10, or C431, your CUST will be kept the same.
If you have a different CUST number, it will default to C636.
If you previously installed and want to return to your old CUST number listed below, just install again.
(The above is updated as of 4/30)
Those having any issues with installations on the P30 Pro are welcome to post here.
Note that rebranding (changing the region from Chinese to International, for example) is not available at present. Bootloader codes are also currently not available at present.
Installation and unbricking are available via the aforementioned HiSuite method.
so if my p30pro is c185 can i use this update ?!
---------- Post added at 01:45 AM ---------- Previous post was at 01:26 AM ----------
just tried it , it failed while installing @ 5% it got stuck
same exact problem when i had mate 20 pro
Thanks for adding support, will try it later.
edit : my model is the VOG-L29 currently running on 9.1.0.124 ( C636E4R1P5 ) ; so which one should i choose ? Thanks OP
JJay666 said:
Thanks for adding support, will try it later.
edit : my model is the VOG-L29 currently running on 9.1.0.124 ( C636E4R1P5 ) ; so which one should i choose ? Thanks OP
Click to expand...
Click to collapse
Choose from the VOG-Global section.
VOG-Global section works for any VOG-L29, VOG-L09, or VOG-L0C.
kinjx11 said:
so if my p30pro is c185 can i use this update ?!
---------- Post added at 01:45 AM ---------- Previous post was at 01:26 AM ----------
just tried it , it failed while installing @ 5% it got stuck
same exact problem when i had mate 20 pro
Click to expand...
Click to collapse
We've confirmed it works. Are you sure you don't have a pass on your account tied to a different phone?
duraaraa said:
This is the official support thread for FunkyHuawei on the P30 Pro.
FunkyHuawei is a paid service which provides tools and infrastructure which can be used to update or unbrick your P30 Pro.
Generally it's useful for updating to a version of your own choice rather than waiting for OTAs.
Today (26 April), P30 Pro support was added to FunkyHuawei via the HiSuite method (which can be found in the instructions page).
The below firmwares are available for installation, from the VOG-Global section.
VOG-LGRP2-OVS 9.1.0.109
VOG-LGRP2-OVS 9.1.0.121
VOG-LGRP2-OVS 9.1.0.122
VOG-LGRP2-OVS 9.1.0.124
VOG-LGRP2-OVS 9.1.0.131
VOG-LGRP2-OVS 9.1.0.136
VOG-LGRP2-OVS 9.1.0.140
Please note that the CUST and PRELOAD will be C636, but it can be installed on any VOG-L29, VOG-L09, or VOG-L0C model.
Those having any issues with installations on the P30 Pro are welcome to post here.
Note that rebranding (changing the region from Chinese to International, for example) is not available at present. Bootloader codes are also currently not available at present.
Installation and unbricking are available via the aforementioned HiSuite method.
Click to expand...
Click to collapse
As noob on huawei. Can you explain me this numbers to me?
Base Software Version
VoG-LGRP2-OVS 9.1.0.124
CUST SOFTWARE VERSION
VOG-L29-CUST 9.1.0.4(431)
PRELOAD SOFTWARE VERSION
VOG-L29-PRELOAD 9.1.0.2(C431R2)
Which ones are the important when i look into firmwares to my model? . Cheers
juanpirulo said:
As noob on huawei. Can you explain me this numbers to me?
Base Software Version
VoG-LGRP2-OVS 9.1.0.124
CUST SOFTWARE VERSION
VOG-L29-CUST 9.1.0.4(431)
PRELOAD SOFTWARE VERSION
VOG-L29-PRELOAD 9.1.0.2(C431R2)
Which ones are the important when i look into firmwares to my model? . Cheers
Click to expand...
Click to collapse
None of the number are important for the P30 Pro. If it's VOG-L29 like yours is, or VOG-L09, or VOG-L0C, for any of the various variants, you can install from the LYA-Global section.
duraaraa said:
None of the number are important for the P30 Pro. If it's VOG-L29 like yours is, or VOG-L09, or VOG-L0C, for any of the various variants, you can install from the LYA-Global section.
Click to expand...
Click to collapse
Last time for my mate 20 pro, I purchased credits. Was wondering if I subscribe now to the monthly or every 15 days plan, do I get access to download firmware or do I have still have to purchase credits to download? Thanks.
JJay666 said:
Last time for my mate 20 pro, I purchased credits. Was wondering if I subscribe now to the monthly or every 15 days plan, do I get access to download firmware or do I have still have to purchase credits to download? Thanks.
Click to expand...
Click to collapse
If you have an active subscription you do not need to buy credits. You can use the installation feature all you want during the validity of the subscription.
duraaraa said:
If you have an active subscription you do not need to buy credits. You can use the installation feature all you want during the validity of the subscription.
Click to expand...
Click to collapse
Okay sweet thanks.
Edit: Is the .140 file same as the OTA size ie +-500mb or is it full firmware and will it wipe my phone?
Thanks again
duraaraa said:
We've confirmed it works. Are you sure you don't have a pass on your account tied to a different phone?
Click to expand...
Click to collapse
i have a pass and 999 credits , it didn't wok on mate20pro and p30pro , i used eRecovery method
kinjx11 said:
i have a pass and 999 credits , it didn't wok on mate20pro and p30pro , i used eRecovery method
Click to expand...
Click to collapse
erecovery doesn’t work on emui 9 and later. You need to use hisuite method.
If you have a pass and install isn’t working in hisuite it’s likely tied to a different phone. One pass is tied to one phone.
how do i know what device i'm tied to ?
---------- Post added at 04:26 AM ---------- Previous post was at 04:22 AM ----------
i also have a funkyshop purchase tied to my account which is why i have 999 credits
stuck at 5% installing update on phone. Everything downloaded successfully but when it reaches the last part, hisuite stops and on the phones it shows installing update , 5% .
edit : re-did it and its fine now, updating. Will update back here shortly.
edit : update successful and am now on .140
So, in the future, will i still be able to receive OTA ?
Thanks @duraaraa
I'm on C185.
By going to C636 - I'm killing my OTA Function, Isn't it ?
JazonX said:
I'm on C185.
By going to C636 - I'm killing my OTA Function, Isn't it ?
Click to expand...
Click to collapse
Can't be sure. Huawei has changed the OTA process in the P30 series, so it's untested. It should probably be possible to go back to C185 using eRecovery though.
JazonX said:
I'm on C185.
By going to C636 - I'm killing my OTA Function, Isn't it ?
Click to expand...
Click to collapse
my p30pro was c185 , after updating using FH now it's running c636 software , everything is fine and working 100%
Will it void my warranty?
wajeehuzkhan said:
Will it void my warranty?
Click to expand...
Click to collapse
Generally, no. Bootloader remains locked, no reason for it to void the warranty. It's just installing an update package.
I seem to be stuck at the 5% installing as well. My VOG-L29 was purchased through FunkyHuawei and through email this morning I was told the subscription is active. When I log in I can select the firmware, everything seemed to work correctly installing HiSuite 9.0.2.301 and then running FHHiSuiteInstaller.exe. But when I try the System Recovery it always fails at installing system and leaves the phone showing "5% Installing Update".
Your currently selected firmware is VOG-LGRP2-OVS 9.1.0.140
You have 999 credits. You may install firmware.
You are on a pass which will expire 2024-04-26 07:22:09.418570 (GMT+9).
Click to expand...
Click to collapse
Related
Has anyone rebranded their Chinese AL00 to an International L29 ROM? If so how did you do it? The same way to rebrand the Mate 9 or different because Oreo has a different partition size etc etc?
I can't decide if I get an AL00 128gb version and change to L29C636 or buy a 64gb version with L29C432 European ROM already on it. Am in the UK.
I wouldn assume it can be possible. I can see 2 sellers in Alliexpress providing the Chinese variant with the International firmware so I think it is a matter of time someone can tell us the instructions to do it by ourselves.
There is only one way to rebrand the phone for now, it's a paid service but for now it's only partial rebranding https://www.reddit.com/r/funkyhuawei
tboy2000 said:
Has anyone rebranded their Chinese AL00 to an International L29 ROM? If so how did you do it? The same way to rebrand the Mate 9 or different because Oreo has a different partition size etc etc?s possible and tbats all that matters, enjoying my C636 mate 10 now
I can't decide if I get an AL00 128gb version and change to L29C636 or buy a 64gb version with L29C432 European ROM already on it. Am in the UK.
Click to expand...
Click to collapse
I have, and its nowhere near the same as mate 9, mate 9 was a walk in the park, like taking candy from a baby, mate 10 rebrand will have you losing weight through stress! Its possible and thats all that matters, enjoying my C636 mate 10 now. i exaggerate lol but its more difficult than mate 9
gm007 said:
There is only one way to rebrand the phone for now, it's a paid service but for now it's only partial rebranding https://www.reddit.com/r/funkyhuawei
Click to expand...
Click to collapse
Correct, its really nice the choice is there!
@lawtq I understand the Mate offers either Google Now or Hi-Board when you swipe right on the home screen, depending on which ROM is installed. So on your C636 ROM which option do you have to choose from?
gm007 said:
There is only one way to rebrand the phone for now, it's a paid service but for now it's only partial rebranding
Click to expand...
Click to collapse
What do you mean by partial? Do you lose features when rebranding? And how much does it cost?
Thanks in advance
arturoe10 said:
What do you mean by partial? Do you lose features when rebranding? And how much does it cost?
Thanks in advance
Click to expand...
Click to collapse
It's possible to rebrand fully now, without losing any features. The cost varies depending on whether or not you unlock your bootloader. Check the FunkyHuawei thread for information.
https://forum.xda-developers.com/mate-10/how-to/root-updates-rebranding-unbricking-t3701970
tboy2000 said:
@lawtq I understand the Mate offers either Google Now or Hi-Board when you swipe right on the home screen, depending on which ROM is installed. So on your C636 ROM which option do you have to choose from?
Click to expand...
Click to collapse
I didn't see this as you didn't quote me, apologies. C636 is hi board and C432 is Google
REBRAND VTR-AL00 to VTR-L29
I could rebrand my VTR-AL00 to VTR-L29
These are the steps that I follow:
NOTES:
- I recommend you to use Windows 10. It doesn´t produce any bug.
-Follow the Step 1 from here https://forum.xda-developers.com/p10...guide-t3691013
1) Download the update package from here https://forum.xda-developers.com/mat...ckage-t3593108 (Direct uncompress Base, OS, and P10 zips without file name as directory.)
2) It´s important to have this version of TWRP --> twrp-3.1.1-0-vtr.img . Once you have rename it to twrp-3.1.0-0-vtr.img and put it in HWOTA\recovery\VTR (replace the version that is in there)
3) Then change hwota.sh as zhjc1124 says here https://forum.xda-developers.com/p10/help/vtr-al00-rooted-t3659636
4) Now run the script. It´s important to select the update folder source because if you don´t, it doesn´t works.
So put your 3 updates files (update, hw and public) in HWOTA\update
5) If at the final of the script your phone enters in recovery mode those are good news! Now you have to run the script again but this time select update instead of rebrand
6) In case your firmware would rebranded in a different version like "Onyx D188", DON´T PANIC, it happens sometimes. To solve this problem just download another
update files and change them with the old ones (remember: HWOTA\update). So now run the script again and select rebrand (In case you need run the script again in update mode) and that is all.
radex2000 said:
I could rebrand my VTR-AL00 to VTR-L29
These are the steps that I follow:
NOTES:
- I recommend you to use Windows 10. It doesn´t produce any bug.
-Follow the Step 1 from here https://forum.xda-developers.com/p10...guide-t3691013
1) Download the update package from here https://forum.xda-developers.com/mat...ckage-t3593108 (Direct uncompress Base, OS, and P10 zips without file name as directory.)
2) It´s important to have this version of TWRP --> twrp-3.1.1-0-vtr.img . Once you have rename it to twrp-3.1.0-0-vtr.img and put it in HWOTA\recovery\VTR (replace the version that is in there)
3) Then change hwota.sh as zhjc1124 says here https://forum.xda-developers.com/p10/help/vtr-al00-rooted-t3659636
4) Now run the script. It´s important to select the update folder source because if you don´t, it doesn´t works.
So put your 3 updates files (update, hw and public) in HWOTA\update
5) If at the final of the script your phone enters in recovery mode those are good news! Now you have to run the script again but this time select update instead of rebrand
6) In case your firmware would rebranded in a different version like "Onyx D188", DON´T PANIC, it happens sometimes. To solve this problem just download another
update files and change them with the old ones (remember: HWOTA\update). So now run the script again and select rebrand (In case you need run the script again in update mode) and that is all.
Click to expand...
Click to collapse
Your links don't seem to work, could you send me working ones please? I've been trying to rebrand my AL00 to L29 without success, and would be so happy if finally managed to do this.
Filal253 said:
Your links don't seem to work, could you send me working ones please? I've been trying to rebrand my AL00 to L29 without success, and would be so happy if finally managed to do this.
Click to expand...
Click to collapse
Sorry, I taught an URL from XDA doesn´t change. To solve it just search this topics on google.
1° URL- [GUIDE] Huawei P10 debrand/rebrand/update (1° PAGE - 1° POST)
2° URL- [Guide] Mate 9 Flash Nougat Update Package and Rebrand (1° PAGE - 1°POST)
3° URL- Can VTR-AL00 BE ROOTED? (1° PAGE - 7° POST)
Filal253 said:
Your links don't seem to work, could you send me working ones please? I've been trying to rebrand my AL00 to L29 without success, and would be so happy if finally managed to do this.
Click to expand...
Click to collapse
hello guys .. sorry if I ask you but I'm a bit 'novice .. I have a BLA-L29. I'm looking for the phone and music player Apk of the Chinese versions L00. Can you help me?
radex2000 said:
Sorry, I taught an URL from XDA doesn´t change. To solve it just search this topics on google.
1° URL- [GUIDE] Huawei P10 debrand/rebrand/update (1° PAGE - 1° POST)
2° URL- [Guide] Mate 9 Flash Nougat Update Package and Rebrand (1° PAGE - 1°POST)
3° URL- Can VTR-AL00 BE ROOTED? (1° PAGE - 7° POST)
Click to expand...
Click to collapse
Thanks for replying. I tried your method including the edit to hwota.sh and switching the TWRP. However, the script freezes for me at the step "After device enter TWRP, connect to USB cable." When I press enter, nothing happens, as if the script didn't recognize my phone was in TWRP or as if it froze. Do you have any idea what might be wrong?
Filal253 said:
Thanks for replying. I tried your method including the edit to hwota.sh and switching the TWRP. However, the script freezes for me at the step "After device enter TWRP, connect to USB cable." When I press enter, nothing happens, as if the script didn't recognize my phone was in TWRP or as if it froze. Do you have any idea what might be wrong?
Click to expand...
Click to collapse
Well, i´m thinking on two different reasons:
1- You didn´t disable "always prompt when connecting to USB"
2- your computer doesn´t have right drivers for P10. (Try using windows 10)
lawtq said:
I didn't see this as you didn't quote me, apologies. C636 is hi board and C432 is Google
Click to expand...
Click to collapse
so why did you choose hiboard instead on google 432? are you in USA?
i have success to flash VTR-AL00 with VTR-L29 Firmware and get Playstore all function work ok , must update to Oreo and unlock bootloader then flash with VTR-L29 Oreo full firmware i use Chimeratool to unlock and flash
This is the official FunkyHuawei support thread.
FunkyHuawei is a (mostly) paid service which allows you to do the following:
1. Install the latest system software, even before it's released by OTA.
2. Install beta/prerelease system software, without needing to be a beta tester.
3. Recover a bricked phone.
4. Rebranding / Change the region of your phone (China -> Europe, for example, to get Google and so on.)
5. Root your EMUI 8 phone, even with stock recovery (This feature is free)
Except for rooting, all of these features are supported even if you cannot unlock your phone's bootloader.
To find FunkyHuawei, please Google it. Or you can find a link to the service as well as our rebranding tool within the following XDA Portal article.
https://www.xda-developers.com/exclu...-pro-firmware/
We are pleased to announce FHUnbrickFlashTool -- You can now repair any recent Huawei phone via fastboot, even if you cannot access eRecovery or boot the phone! Even if it doesn't show the Huawei logo, as long as you can get a fastboot connection to your computer, you can recover the phone! Google FHUnbrickFlashTool or check FunkyHuawei's reddit for details.
In cooperation with XDA, FunkyHuawei is offering a free credit to Recognized Developers and Recognized Contributers on XDA.
Please PM me for more details.
We will continue posting in this thread with updates regarding new software versions and releases regarding this device.
We will also be monitoring it so we can help anyone who has issues.
For device-specific information, please see the next post.
Honor V10 Information:
Rebranding (7 credits): You can rebrand the Honor V10 to and from the Chinese, Asian, and European versions.
We have released a special rebranding tool just for the Honor V10. You can find the link from the rebranding section of our website, or on our reddit. This new procedure avoids any issues with the device, and everything works after testing. We have tested rebranding Chinese to Asia and Europe brandings. Please use this FHRebrandToolBKLEdition, not FHRebrandTool, as this device has some differences from other devices we needed to address.
To rebrand to Chinese:
Use FHRebrandToolBKLEdition and choose BKL-AL20 for the model, and all/cn for the branding. Then use eRecovery method to install firmware from BKL-AL00 or BKL-AL20 section of our site, twice.
To change the phone to European, choose BKL-L09 and hw/eu branding in the tool. Then use eRecovery method to install the latest firmware from the BKL-L09C432 section of our site, twice.
To change the phone to Asia, choose BKL-L09 and hw/spcseas branding in the tool. Then use eRecovery method to install the latest firmware from the BKL-L09C636 section of our site, twice.
In most cases, you'll need to install the new firmware in eRecovery twice.
Unbricking (7 Credits): Contact FunkyHuawei support for help unbricking. You can use FHUnbrickFlashTool (google for FunkyHuawei Unbrick Flash Tool and check the page on our reddit.) You may also be able to use the eRecovery method if you can get into eRecovery.
Frequently Asked Questions
Q: How much does FunkyHuawei cost?
A: You need to buy credits on the FunkyHuawei website. The price per credit varies depending on the number of credits you buy. Different operations cost different amounts of credits. However, the Root feature of the Mate 10 tool is free, and as mentioned above, Recognized Developers/Contributors of XDA can ask for a free credit.
Q: My phone is bootloader locked, and FRP locked. My bootloader unlock code dosen't work. It won't boot. eRecovery doesn't work. Can you help?
A: Yes. With the Mate 10 this is now a common situation. Contact FunkyHuawei for help in this situation. We'll need to access your computer remotely and the procedure is a little bit complicated, but the phone can be unbricked.
Q: I can't get my bootloader unlock code/don't want to unlock my bootloader, but I want to change my phone to something other than Chinese. Can you help?
A: Yes. Our new FunkyHuawei Rebrand Tool works on ALL recent Huawei phones, to rebrand them to another region even when the bootloader is locked.
Q: I'm not seeing the latest version listed on FunkyHuawei or elsewhere as an OTA. Why not?
A: Huawei has a very odd and unpredictable way of rolling out OTA updates. You can use FunkyHuawei to install the new version immediately, or can wait for the update to be rolled out. It might be a month or more after release until the update reaches your device from Huawei directly. We have no idea why.
Q: Why isn't FunkyHuawei free?
A: Because many of FunkyHuawei's features cost FunkyHuawei money to provide. Features that don't cost FunkyHuawei money to provide, like rooting the Mate 10 or our TWRP build for Mate 9/Oreo, for example, are generally made available for free. There are also bills to pay, kids to put through school, and so on.
Q: I noticed FunkyHuawei in an XDA Portal article!
A: FunkyHuawei loves XDA, and is cooperating with them as much as possible. Recognized Developers and Contributors on the XDA forums are welcome to claim a free credit from FunkyHuawei as well.
Q: I have a different question.
A: This is what this thread is for! Post away!
Will the Honor View 10 like the Mate 10 pro show "relocked" if the bootloader was once unlocked before?
Dito13 said:
Will the Honor View 10 like the Mate 10 pro show "relocked" if the bootloader was once unlocked before?
Click to expand...
Click to collapse
Yes, if you unlock it with the code.
If you use FHRebrandTool it will never show relocked, but only locked.
How to unroot and lock bootloader Honor View 10
duraaraa said:
Yes, if you unlock it with the code.
If you use FHRebrandTool it will never show relocked, but only locked.
Click to expand...
Click to collapse
Dear Team,
had used your tool for Root and unlocking my bootloader in Honor View 10, now i wish to unroot and lock the bootloader as rooting made many features blocked.
kindly help how to do this.
I'm trying to root my bkl-L09 but when I downloaded the program I don't see an option to root just to backup my phone.
removed *
Hi @duraaraa,
I'm on Huawei Honor V10 BKL-AL20 8.0.0.132(C00). A bit confused. Will this "Mate10" Root/Rebrand tool and Rebrand (without unlocking bl) tool also work with Honor V10? What re-brand/firmware do you recommend for my phone if I mostly reside in Asia?
piphol said:
Hi @duraaraa,
I'm on Huawei Honor V10 BKL-AL20 8.0.0.132(C00). A bit confused. Will this "Mate10" Root/Rebrand tool and Rebrand (without unlocking bl) tool also work with Honor V10? What re-brand/firmware do you recommend for my phone if I mostly reside in Asia?
Click to expand...
Click to collapse
No. You need to use FHRebrandTool to rebrand the Honor V10.
Please google for honor v10 rebranding guide and check the result from the FunkyHuawei reddit for instructions.
The only version you can rebrand to right now is the European one, so that's what I'd suggest.
surdu_petru said:
Please OP ... remove this sentence from OP, because it's not true :
I already send you a PM, and as I can see , there is nothing free for RC
Click to expand...
Click to collapse
I checked the PM, and you didn't ask for a free credit, or tell me the FH account you use. You just asked a generic support question, so it was not clear what you were asking for.
Let me know your email address from your funkyhuawei account by PM, and I can give you the credit, since you are a recognized contributor. However if you are on Andorid O with an Honor 9 as your message says, we'd need to have an Android O build for your phone/branding for it to work for you. Maybe you can let me know what branding your phone is (fastboot getvar vendorcountry)
Still looking for an answer on how to root my bkl-l09. I only see options to back up things when I download the tool
Sent from my BKL-L09 using Tapatalk
1+
And i read, that some features doenst work after the V10 was root. Information about root V10 very poor.
No ways to root honor view 10
big_axe said:
No ways to root honor view 10
Click to expand...
Click to collapse
But there's already a root method.
So what are the steps to root the View 10? Which tool do we need to use? I have the bkl-L09
Eagle1337 said:
But there's already a root method.
Click to expand...
Click to collapse
Absolutely I don't want to rebrand my view 10, so what is this method? With the mentioned tool there are no way to root. I think that this thread is only a spam to make advertising and to get money.
There is a way to root Honor V10. From another thread, I read unlocking bootloader then flashing a modified boot img can do the trick. But when I read the Mate 10 thread about rooting, they've lost Theme customization, Android pay (deal breaker) and front camera bokeh effect (another deal breaker for selfie addicts? ). I wonder if Honor V10 has the same restrictions when rooted. Oh by the way, freezing/uninstalling some pre-installed apps when rooted can easily brick the phone. So I advise everyone not to freeze apps. That's why FH strongly discourages doing it. Other than that, we're good... ? ?
OP i tried to update my firmware from B120 to B130, i tried twice and it failed. Reason update pakaged could not be verified. My 2 creddits down the drain.
Is there something am not doing right?
peepee999 said:
OP i tried to update my firmware from B120 to B130, i tried twice and it failed. Reason update pakaged could not be verified. My 2 creddits down the drain.
Is there something am not doing right?
Click to expand...
Click to collapse
You can email our support if you have such issues. Please try using eRecovery not HiSuite.
Is anyone with the most recent firmware using that exact same model?
i've heard this is the least popular model, thus being the one used on the u.s exclusively.
my model its Mate 10 pro (BLA-A09)
and im currently running on 8.0.0.123 (C212)
March Security update.
Im 3 months old on updates, why is this happening? Can i upgrade my firmware without bricking my device? FunkyHuawei says that BLA A09 had issues with this procedure before.
vitreovz said:
Is anyone with the most recent firmware using that exact same model?
i've heard this is the least popular model, thus being the one used on the u.s exclusively.
my model its Mate 10 pro (BLA-A09)
and im currently running on 8.0.0.123 (C212)
March Security update.
Im 3 months old on updates, why is this happening? Can i upgrade my firmware without bricking my device? FunkyHuawei says that BLA A09 had issues with this procedure before.
Click to expand...
Click to collapse
Just got the same model phone, which I purchased in the US. Your region code is different than mine, mine is C567, which matches the firmware listed on firmware finder for this model. I am on 8.00.112 but the security patch is April? I couldn't find any firmware listed for the BLA-09 with that region code. There is discussion on out of region phones not receiving OTA's?
vitreovz said:
Is anyone with the most recent firmware using that exact same model?
i've heard this is the least popular model, thus being the one used on the u.s exclusively.
my model its Mate 10 pro (BLA-A09)
and im currently running on 8.0.0.123 (C212)
March Security update.
Im 3 months old on updates, why is this happening? Can i upgrade my firmware without bricking my device? FunkyHuawei says that BLA A09 had issues with this procedure before.
Click to expand...
Click to collapse
Looks like your phone is from ATT Mexico. I have the same model and I can recommend two things, the first is that you do not try to rebrand to another model, and the second is that you can do it to a09c567 but honestly not worth it because you can not return to C212 if you need to take it to warranty because there is no firmware for C212. So from my experience I recommend you wait for some update although it takes a long time.
Obscurecruel said:
Looks like your phone is from ATT Mexico. I have the same model and I can recommend two things, the first is that you do not try to rebrand to another model, and the second is that you can do it to a09c567 but honestly not worth it because you can not return to C212 if you need to take it to warranty because there is no firmware for C212. So from my experience I recommend you wait for some update although it takes a long time.
Click to expand...
Click to collapse
Yeah, you're right. I bought it at ATT México, then i just asked them to free the networking and changed from carrier, will that affect my phone in any ways?
vitreovz said:
Yeah, you're right. I bought it at ATT México, then i just asked them to free the networking and changed from carrier, will that affect my phone in any ways?
Click to expand...
Click to collapse
No, it won't affect.
*** Rebranding USA Huawei Mate 10 Pro (BLA-A09) ***
Julio Gonzalez <[email protected]> 25 de junio de 2018, 16:03
Para: [email protected]
Dear FunkyHuawei,
I read what you wrote about "rebranding" on https://funkyhuawei.club/rebranding
Are we -USA mate 10 pro owners- damned? Do we have any alternative besides waiting for future Huawei's OTA
Update?
Thank you very much, excuse my poor english!
________________________________________________________
FunkyHuawei Club <[email protected]> 26 de junio de 2018, 0:27
Para: Julio Gonzalez <[email protected]>
The BLA-A09 cannot be rebranded to BLA-L29 or BLA-L09 or BLA-AL00 — it can only be rebranded to other regional
variants of BLA-A09 (for example between Mexico/US variants is possible)
So yes — you’re pretty much stuck until there’s a new update
vitreovz said:
Is anyone with the most recent firmware using that exact same model?
i've heard this is the least popular model, thus being the one used on the u.s exclusively.
my model its Mate 10 pro (BLA-A09)
and im currently running on 8.0.0.123 (C212)
March Security update.
Im 3 months old on updates, why is this happening? Can i upgrade my firmware without bricking my device? FunkyHuawei says that BLA A09 had issues with this procedure before.
Click to expand...
Click to collapse
Hey buddy!
Could you kindly share with me your oeminfo and nv partitions backup from your phone ?
I need fix mine...
Thank´s!!!
---------- Post added at 06:26 PM ---------- Previous post was at 06:22 PM ----------
breadman2843 said:
Just got the same model phone, which I purchased in the US. Your region code is different than mine, mine is C567, which matches the firmware listed on firmware finder for this model. I am on 8.00.112 but the security patch is April? I couldn't find any firmware listed for the BLA-09 with that region code. There is discussion on out of region phones not receiving OTA's?
Click to expand...
Click to collapse
Hey buddy!
Could you kindly share with me your oeminfo and nv partitions backup from your phone ?
I need fix mine...
Thank´s!!!
---------- Post added at 06:28 PM ---------- Previous post was at 06:26 PM ----------
Do not rebrand the BLA-A09!
I just recovered with a lot of sacrifice a Mate 10 Pro from a client who tried to do the rebrand.
Now, I need the NV partition and the Oeminfo of a Mate 10 Pro BLA-A09 to finish repairing the phone.
ChaseRxx said:
Hey buddy!
Could you kindly share with me your oeminfo and nv partitions backup from your phone ?
I need fix mine...
Thank´s!!!
---------- Post added at 06:26 PM ---------- Previous post was at 06:22 PM ----------
Hey buddy!
Could you kindly share with me your oeminfo and nv partitions backup from your phone ?
I need fix mine...
Thank´s!!!
---------- Post added at 06:28 PM ---------- Previous post was at 06:26 PM ----------
Do not rebrand the BLA-A09!
I just recovered with a lot of sacrifice a Mate 10 Pro from a client who tried to do the rebrand.
Now, I need the NV partition and the Oeminfo of a Mate 10 Pro BLA-A09 to finish repairing the phone.
Click to expand...
Click to collapse
Sure thing bro, but thing is i dont know how to do it. So if you teach how i can help you out.
vitreovz said:
Sure thing bro, but thing is i dont know how to do it. So if you teach how i can help you out.
Click to expand...
Click to collapse
If you can, i´m realy gratefull
Instructions here:
You need root device first
https://www.dc-unlocker.com/huawei-phone-partitions-backup
I need all that in describle there
Thank you bro!
breadman2843 said:
Just got the same model phone, which I purchased in the US. Your region code is different than mine, mine is C567, which matches the firmware listed on firmware finder for this model. I am on 8.00.112 but the security patch is April? I couldn't find any firmware listed for the BLA-09 with that region code. There is discussion on out of region phones not receiving OTA's?
Click to expand...
Click to collapse
Hi bro, could you kindly share your NV partitions, I need fix my device...
If you can, I'll sent you instructions...
Please?
Enviado de meu BLA-L29 usando o Tapatalk
I'll pay for this NV backup...
Please!
Enviado de meu BLA-L29 usando o Tapatalk
how to rebrand Mate 20 pro from chinese version to asia version ?
Need it too
I would also be interested in rebranding as certain apps such as Google Photos (not uploading unless open) and Google Nest (no notifications) do not work properly even after adjusting the power and notification settings.
Would installing Kangvip help or...?
you may not do that .because the china version got software difference between other version flash that may cause serious problem for example the band support the system OTA
Wrong thread tho
I wante to know how to rebrand Mate 20 pro from asia version to chinese version .
funkyhuawei just posted on twitter they found the method to rebrand.....
richard_li said:
funkyhuawei just posted on twitter they found the method to rebrand.....
Click to expand...
Click to collapse
That sounds great
Hi,
I bought 1 year ago the Media Pad M5 Pro unbranded from eBay.
I never received any update till now Still on Android 8.0.0 ( Build Nr CMR-AL19 8.0.0.199 (C431)
Huawei Support told me multiple times there is no update available for my device.
But I think they are wrong.
I think it just got the wrong Cust (C431 is made for "providers" but mine has no brand but this firmware)
C432 receives all the updates from Huawei.
So my question is how I can change my Cust from C431 to C432 or directly flash a C432 firmware?
I hope someone can help me in easy steps I think I am not the only one on the whole internet with this problem but in non-forum a solution.
Thanks
4r44444 said:
Hi,
I bought 1 year ago the Media Pad M5 Pro unbranded from eBay.
I never received any update till now Still on Android 8.0.0 ( Build Nr CMR-AL19 8.0.0.199 (C431)
Huawei Support told me multiple times there is no update available for my device.
But I think they are wrong.
I think it just got the wrong Cust (C431 is made for "providers" but mine has no brand but this firmware)
C432 receives all the updates from Huawei.
So my question is how I can change my Cust from C431 to C432 or directly flash a C432 firmware?
I hope someone can help me in easy steps I think I am not the only one on the whole internet with this problem but in non-forum a solution.
Thanks
Click to expand...
Click to collapse
changing to c432 (which is the m5 wifi version, with Kirin 960s not Kirin 960) is quit risky - bootloop
but u could go for the testpoint method and flash treble gsi android 10, need to open bootloader
https://forum.xda-developers.com/mediapad-m5/how-to/downgrade-unbrick-huawei-device-methods-t3915693
its a bit easier with HCU client and dc phoenix( u need the dc unlocker anyway -to unlock bootloader - unfortunatly no other way) but HCU is 20 bucks time license for 3 days
if you really want the the super easy way there is a guy doing it for 30 bucks but u need to give him access to your windows pc(i wouldnt do that) https://ministryofsolutions.com/paid-services
if u find an easier way pls tell me, i gave an cmr-w09 (m5 wifi) and its running super smooth on havoc os(custom android 10)